T-Bay. The Contractor Solution. CFI Fluorescent is a Philips group brand. Industrial T5HO and T8 Fluorescent

Transcription

1 Industrial T5HO and T8 Fluorescent The Contractor Solution CFI Fluorescent is a Philips group brand

2 Introducing, CFI s new generation of fluorescent high bay fixtures designed to answer your industrial, institutional, recreational, and commercial needs. represents the most cost effective full-body fluorescent high bay on the market while showing one of the highest efficiency with 92.7% light output from the luminaire. 6-lamp T8 or T5HO Combined with its QuickHang system, those advantages make the the best alternative for retrofitting metal halide fixtures and in new installations. 4-lamp T8 or T5HO (2- and 3-lamp also available) Wireguard Option Lens Option (Wireguard with lens also available) CFI Fluorescent Reliable Fluorescent Solutions Dependability is our promise. Specifiers tell us we deliver on it with every order. How? Our well-designed luminaires are built with the most modern technology, practically applied, so you don t have to worry. Our proven quality comes from a manufacturing and testing facility second to none, recently expanded and the only one in Canada dedicated to fluorescent lighting. We make sure our luminaires provide the latest in energy efficiency, visual comfort, controlled light distribution and all the features you need to meet your most challenging specifications. We are committed to producing the best fluorescent lighting luminaires you can find. Reliable Fluorescent Solutions from CFI Fluorescent. It s in our name. You can depend on it.

3 The Best Value for Restricted Budgets HIGH EFFICIENCY Efficiency of up to 92.7% for T5HO open high bay fixture. Well designed specular optics providing an excellent light distribution. An energy saving alternative for a wide range of applications. Up to 50% savings are possible over existing HID magnetic ballast solutions*. Provides all the advantages of fluorescent technologies including a broad range of lamp properties for colour and CRI. (See lamp chart at page 7). QUICK INSTALLATION & EASY MAINTENANCE QuickHang flexible chain system making retrofitting from HID to fluorescent high bays easier than ever (available as accessories, see page 6). Hinged reflector and top access panels for easy wiring. Full-body lighting fixture protecting against structural problems during and after installation. FULL RANGE OF ACCESSORIES & OPTIONS Shielding Options: Open bay, clear acrylic lens, clear prismatic lens, wireguard, wireguard with lens. Mounting Options: Center mount with hook, center mount for 3/4" pipe, pendant pipe mount. Field-installed motion sensor. * Based on a 24/7 consumption of twelve 400 W MH HID fixtures vs. twelve T5HO fixtures, at $0.10/kWh. Table of Contents Contractor-Friendly Installation & Maintenance Features...2 QuickHang System...2 Choice of Mounting Systems...3 Product Information & Ordering Logic...4 Options & Accessories...6 Lamp Chart...7 1

4 Contractor-Friendly Installation & Maintenance Features Most Cost Effective Full-Body Hinged Reflector Swings down for easy wiring access High-Efficiency Optics Miro IV 95% reflective contoured specular inside reflector Two Top Access Plates, One at Each End Facilitates flex or cord wiring connections and for quick on site installation of occupancy sensors on either end. Hinged Reflector Top Access Plates Knock-Out Accepts Field-Installed Motion Sensor Also provides access to wiring chamber QuickHang System The QuickHang mounting plate installs to the junction box with supply wires coming through the access hole. Simply connect the fixture to the mounting plate using the Chain Hanger Kit and complete the wiring. This contractor-friendly feature lowers installation time and protects the fixture from accidental damage. Order mounting plate (FHTMTG) with mounting chain set (EE9HC) (see page 6). Conventional Mounting Force QuickHang with Chain Force 2

5 Fluorescent High Bay Compact Electronic Ballast QuickHang System CFI Fluorescent makes hanging the fixture exceptionally easy using the QuickHang Mounting Plate and chain accessory kit. Choice of Mounting Systems for Any Installation CFI Fluorescent offers multiple mounting options including our patented QuickHang system making installation quick in retrofit and new applications. High-Reflect Finish Durable post-painted white polyester powder finish Chain Hanger Kit Decorative Pendant Pipe Mount Sturdy Construction 22-gauge precision one piece die-formed post painted housing 1/2 Threaded Pipe 3

6 Features Materials: Low profile, full-body housing constructed of die-formed 22 gauge cold rolled steel. Narrow Body 2-, 3-, and 4-lamp Finish: Exterior chassis & cavity post painted in a white baked polyester powder coat finish, eliminating exposed edges for safe handling and rust protection. Access Plate: Top access plate located at each end for easy installation and maintenance RCR C.U.* Mounting System: QuickHang system perfect for HID retrofit. (For additional mounting systems and product numbers, see p. 6.) Reflector: Contoured Miro IV reflector with 95% reflectivity. al: Thermally protected class "P" ballast C.B.M. approved, non PCB. If K.O. is within 3" of ballast, use wire suitable for at least 90 C. 3-1/4" (83mm) -1/4" 13-3/4" (349mm) Label: cul listed. 48" 48" (1219mm) Wide Body 6-lamp RCR C.U.* /4" (83mm) 19-7/8" (505mm) 19-7/8" " 48" (1219 mm) * Reflectances: 50% Ceiling, 30% Wall, 20% Floor.

7 Reference Data Efficiency 92.7% Spacing Ratio (along) 1.3 Spacing Ratio (accross) 1.2 Electronic Ballast Input Watts (120V) 232W Ballast Factor 0.99 Application Data* Luminaire Spacing FC** W/Sq Ft 100' x 12' x 28' Space 20' on centre 16/ ' x 12' x 28' Space 15' on centre 24/ Ordering Guide - T8 Type No Shielding (accessories ordered separately) Lamps Qty/Type Lamp/Luminaire Nominal Length Luminaire Width Catalogue Number 2-T8 48" 14" FHT4C4DXX T8 48" 14" FHT4C4DXX T8 48" 14" FHT4C4DXX T8 48" 20" FHT4C5DXX Fixture Ordering Logic fht 4 C 4 D XX Pg z Fixture Length 4 = 4' Length Reflector C = Contoured Miro IV Reflector Fixture Width 4 = 14" Light Directions D = Downlight Shielding/Cord XX = No Shielding X3 = No Shielding/ 3' Cord and Twist Lock Plug X6 = No Shielding/ 6' Cord and Twist Lock Plug Lamp qty in a luminaire cross-section 2 = 2-Lamp 3 = 3-Lamp 4 = 4-Lamp Lamp/Type 32 = 32W T8 54 = 54W T5H0 Voltage UNV = 120/277V 120 = 120V 277 = 277V 347 = 347V Ballast Type PG = T5H0 Elect. P.S. > One 2-lamp THD<10% PU = T5HO Elect. P.S. One 3-lamp THD <10% PV = T5H0 Elect. P.S. One 4-lamp THD<10% HA = T8 Elect. I.S. One 2-lamp HBF THD<10% HB = T8 Elect. I.S. One 3-lamp HBF THD<10% HC = T8 Elect. I.S. One 4-lamp HBF THD<10% H4 = T8 Elect. I.S. One 4-lamp THD<10% Options Add appropriate suffix to catalogue number (see p.6) Reference Data Efficiency 84.0% Spacing Ratio (along) 1.2 Spacing Ratio (accross) 1.1 Electronic Ballast Input Watts (120V) 314.5W Ballast Factor 1.0 Application Data* Luminaire Spacing FC** W/Sq Ft 100' x 12' x 28' Space 20' on centre 21/ ' x 12' x 28' Space 15' on centre 28/ Ordering Guide - T5HO Type No Shielding (accessories ordered separately) Lamps Qty/Type Lamp/Luminaire Nominal Length Luminaire Width Catalogue Number 2-T5HO 48" 14" FHT4C4DXX254 3-T5HO 48" 14" FHT4C4DXX354 4-T5HO 48" 14" FHT4C4DXX454 6-T5HO 48" 20" FHT4C5DXX654 Fixture Ordering Logic fht 4 C 5 D XX Pg z Fixture Length 4 = 4' Length Reflector C = Contoured Miro IV Reflector Fixture Width 5 = 20" Light Directions D = Downlight Shielding/Cord XX = No Shielding X3 = No Shielding/ 3' Cord and Twist Lock Plug X6 = No Shielding/ 6' Cord and Twist Lock Plug * Average Footcandles Maintained. Total LLF = Reflectance: 50% Ceiling, 30% Wall, 20% Floor. 54W T-5HO lamp rated at 4400 lumens at 25 C. 4'x4' grid at floor level. ** Footcandles at the floor (horizontal) / Footcandles on the walls (vertical). Lamp qty in a luminaire cross-section 6 = 6-Lamp Lamp/Type 32 = 32W T8 54 = 54W T5H0 Voltage UNV = 120/277V 120 = 120V 277 = 277V 347 = 347V Ballast Type P6 = T5H0 Elect. P.S. 4-lamp outside/2-lamp inside THD<10% P7 = T5HO Elect. P.S. One 3- lamp ballast to operate lamps 1,3 and 5, One 3-lamp ballast to operate lamps 2,4 and 6 THD <10% H5 = T8 Elect. I.S. 4-lamp outside/2-lamp inside THD<10% H6 = T8 élect. I.S. Two 3-lamps. THD<10% Options Add appropriate suffix to catalogue number (see p.6) 5

8 Options & Accessories Wireguard Prismatic Wrap Lens FHTWG4/FHTWG5 OPTIONS Emergency Power Pack Factory installed emergency power pack includes charger and inverter concealed in fixture channel. Upon loss of AC power, operates one lamp at high lumen output for a period of 90 minutes. For 347V, please consult your Canlyte representative. Standard Bodine LP600 for T5HO lamps - Add suffix E to product number. B100-CAN for T8 lamps - Add suffix O to product number. Bulk Pack Bulk packs are recommended to reduce site waste removal requirements. Add suffix Z to product number. Gasketed Lens & Hinged Door Frame Chain Set FHTLN4/FHTLN5 FHTWG4-VA/FHTWG5-VA QuickHang Mounting Plate Luminaire Mounted Sensor EE9HC FHMTG ACCESSORIES Lenses & Wireguard Wireguard - FHTWG4 (narrow body) & FHTWG5 (wide body) Prismatic wrap lens - FHTLN4 (narrow body) & FHTLN5 (wide body) Single gasket clear prismatic acrylic lens and hinged door frame - FHTLN4G1-VA (narrow body) & FHTLN5G1-VA (wide body) Single gasket clear acrylic lens and hinged door frame - FHTLN4G1-GI (narrow body) & FHTLN5G1-GI (wide body) Double gasket clear prismatic acrylic lens and hinged door frame - FHTLN4G2-VA (narrow body) & FHTLN5G2-VA (wide body) Double gasket clear acrylic lens and hinged door frame - FHTLN4G2-GI (narrow body) & FHTLN5G2-GI (wide body) Chain Hanger Kit Set of two mounting chains of 24" with sturdy "V" hooks allows gripping luminaire at 4 knockout points for level suspension. One set is required per luminaire in combination with the QuickHang mounting plate. QuickHang mounting plate - FHTMTG Chain Hanger Kit - EE9HC Additional Mounting Systems To have decorative pendant pipes, order stem and canopy sets. Luminaire suspension at 12" STKF12 Luminaire suspension at 18" STKF18 Luminaire suspension at 24" STKF24 Luminaire suspension at 36" STKF36 Luminaire suspension at 48" STKF48 To order the following items, please consult your Canlyte representative: Center Mount for 3/4" pipe including hardware and box. FHTCP Center Mount with hook including hardware, hook and box FHTCH Motion Sensors Field-installed motion sensor, luminaire mounted (accepts 120 to 347V) and remote mounted are offered for increased energy savings. Center Mount for 3/4" pipe including hardware and box. FHTCP Center Mount with hook including hardware, hook and box FHTCH FH360 Power Pack Only required if low voltage sensor is used. Power packs for 120V - FHP Power packs for 277V - FHP Power packs for 347V - FHP

9 Lamp Chart Lamp Wattage Lamp Manufacturer Model Number* Rated Life** (hours) Initial C Colour Temperatures (K) CRI Maximum Overall Length T5 28 W PHILIPS F28T5/8 /ALTO , 3500, "/1163.2mm F28W/T5/8 / , 3500, "/1163.2mm FP28/8 / , 3500, "/1163.2mm T5HO 54 W PHILIPS F54T5/8 /HO/ALTO , 3500, "/1163.2mm F54W/T5/8 / , 3500, "/1163.2mm FP54/HO/8 / , 3500, "/1163.2mm Energy Savings T5 High Output*** 49 W PHILIPS F54T5/8 /HO/EA/ ALTO , 3500, "/1163.2mm T8 32 W PHILIPS F32T8/TL8 /ALTO , 3500, "/1213.6mm F32T8/SPX / , 3500, "/1213.6mm FO32/8 / , 3500, "/1213.6mm Energy Savings T8*** 30 W PHILIPS F32T8/ADV8 /EW/ ALTO 30 WATT F32T8/SP /IS/WM/ FO30/8 /XP/SS/ 28 W PHILIPS F32T8/ADV8 /EW/ ALTO 28 WATT F28T8/XL/SPX / FO28/8 /XP/SS/ 25 W PHILIPS F32T8/ADV8 / XEW/ALTO 25 WATT F32T8/25W/SPX / FO25/8 /XP/SS/ , 3500, "/1219.2mm , 3500, "/1219.2mm , 3500, "/1219.2mm ,3500, "/1219.2mm , 3500, "/1219.2mm , 3500, "/1219.2mm , 3500, "/1219.2mm , 3500, "/1219.2mm , 3500, "/1219.2mm * Add colour temperature in space. ** Rated average life under specified test conditions with lamps turned off and restarted no more frequently than once every 3 operating hours. Rating based on Program Start ballast for T5/T5HO. *** Consult your sales representative for ballast compatibility. 7

10 CFI Fluorescent... Reliable Fluorescent Solutions CFI Fluorescent is a dependable lighting partner serving the commercial, industrial and institutional markets with a complete line of innovative and energy-efficient fluorescent luminaires engineered and manufactured in North America. CFI Fluorescent solutions are backed by a nationwide sales force of trained Canlyte representatives offering a wide range of support services. These include computer-assisted Genesys III lighting design workstations, which simulate the lighting options and calculations for a given space, and the Lighting Concept Centre, a 7,500 square foot demonstration facility giving lighting professionals the opportunity to see lighting solutions in action. For more information, contact: CFI Fluorescent A Philips group brand 3015 Louis-Amos Lachine, QC H8T 1C4 Phone: (514) Fax: (514) Website: info@canlyte.com Catalogue #CG294E Version française disponible. Printed in Canada. Copyright 2009 Philips Group. We reserve the right to change details of design, materials and finish that will not alter installed appearance or reduce function and performance. Some luminaires use fluorescent or high intensity discharge (HID) lamps that contain small amounts of mercury. Such lamps are labeled Contains Mercury and/or with the symbol Hg. Lamps that contain mercury must be disposed of in accordance with local requirements. Information regarding lamp recycling and disposal can be found at