Invue ECM/EMM EPIC MEDIUM W

Transcription

1 DESCRIPTION The EPIC Collection delivers custom luminaire flexibility with the quality and availability expectations of standard specification grade product. Offered in two housing sizes and hundreds of unique combinations, the EPIC Collection can be dressed to suit any application. Recognizing evolving environmental and legislative trends, the EPIC Collection delivers world class optical solutions to the decorative luminaire marketplace. The EPIC Collection offers targeted solutions for full cutoff compliance, spill light control and path of egress illumination while integrating the latest lamp technologies into visually comfortable lighting solutions. SPECIFICATION FEATURES Catalog # Project Comments Prepared by Invue Type Date Construction TOP: Cast aluminum top housing attaches to cast aluminum mounting arm hub with four stainless steel fasteners. One-piece silicone gasket between mounting hub and top casting seals out moisture and contaminants. (See the mounting arm accessories section for a full selection of mounting arms. (Only these arms are compatible with the Epic luminaire). MIDSECTION: Utilizes continuous silicone gaskets to seal top casting and shade. The mid section features cast aluminum construction and stainless steel assembly hardware: Rings feature clear acrylic rings suspended by stainless steel spacers and hardware. SHADES: Heavy gauge precision spun aluminum shades offer superior surface finish and consistency in form. DOORFRAME ASSEMBLY: Used with horizontally lamped segmented optical systems. Die-cast aluminum 1/8 thick door and doorframe seal to underside of shade with a thick wall continuous silicone gasket. Door hinges opens via release of two concealed quick release fasteners. Impact resistant 1/8 thick tempered flat or sag glass lens seals to door with a one-piece silicone gasket. Electrical ELECTRICAL TRAY: Ballast and related electrical componentry are mounted to a reinforced one-piece tray with integral handle. Quick disconnect wiring plugs allow easy tray removal during routine maintenance. Optical OPTICAL SYSTEMS: Choice of five high efficiency segmented optical systems constructed of premium 95% reflective anodized aluminum sheet. Optical segments are rigidly mounted inside a thick gauge aluminum housing for superior protection. All segment faces are clean of rivet heads, tabs, or other means of attachment which may cause streaking in the light distribution. All reflector modules feature tool-less removal, quick disconnect wiring plugs, and are 360 field rotatable. Finish Housing finished in a five-stage premium TGIC polyester powder coat paint, 2.5 mil nominal thickness for superior protection against fade and wear. Standard colors include black, bronze, grey, white, dark platinum, graphite metallic and hartford green. RAL and custom color matches available. Consult your lighting representative at for more information. ECM/EMM EPIC MEDIUM W DIMENSIONS ECM EMM Pulse Start Metal Halide Compact Fluorescent Maximum Height 20" [508mm] Maximum Height 21" [533mm] DECORATIVE AREA LUMINAIRE Maximum Width 24-1/16" [611mm] See configurations for more detailed information. Maximum Width 24-1/16" [611mm] CERTIFICATION DATA IP66 Rated U.L Listed 2G Vibration Tested CSA Listed 40 C Ambient Temperature Rating ISO 9001 EPA Effective Projected Area: (Sq. Ft.) Flat Lens.94 Sag Lens 1.04 SHIPPING DATA Approximate Net Weight: 37 lbs. (17 kgs.) SYSTEMS C E R T I F I E D

2 ORDERING INFORMATION Sample Number: ECM-150-MP-MT-3S-FG-SR-FL-BK-L Product Family 1 ECM= Epic Medium EMM= Epic Medium Lamp Wattage 2 Lamp Type Voltage 6 Distribution Lens Type Compact Fluorescent 3 42=42W 57=57W 4 Pulse Start Metal Halide 50=50W 70=70W 100=100W 150=150W CF= Compact Fluorescent 5 MP= Pulse Start Metal Halide UNV= V Universal Electronic Ballast 120=120V 208=208V 240=240V 277=277V 347=347V 480=480V DT= Dual-Tap wired 277V 7 MT= Multi-Tap wired 277V 8 TT= Triple-Tap wired 347V 9 Options (Add as Suffix) Accessories (Order Separately) 15 2S=Type II Segmented 3S=Type III Segmented 4S=Type IV Segmented 5S=Type V Segmented SL= Forward Throw with Spill Light Eliminator 11 FG=Flat Glass SG=Sag Glass VS= Polycarbonate Vandal Shield 10 Mid Section Type SO=Solid SR=Solid Rings Shade Type Color 11 BL=Bell FL=Flute SN= Straight Narrow SW= Straight Wide AP=Grey BZ=Bronze BK=Black DP= Dark Platinum GM= Graphite Metallic WH=White F= Single Fuse (120, 277 or 347V. Specify voltage) FF= Double Fuse (208, 240 or 480V. Specify voltage) EM= Quartz Restrike with Time Delay (Also strikes at cold start) 12 EM/SC=Quartz Emergency Separate Circuit 12 Q=Quartz Restrike 12 HS=House Side Shield 13 PM48= Pendant Mount 48" Length or Specify Pendant Length Inches (XX) 14 L=Lamp Included WG=Wire Guard VA6150-XX=Bishop Wall Mount Arm VA6151-XX=Bishop Wall Mount Arm with Cross Rod VA6152-XX=Traditional Wall Mount Arm VA6153-XX=Traditional Wall Mount Arm with 45 Strap VA6154-XX=Bishop Single Pole Mount Arm VA6155-XX=Bishop Single Pole Mount Arm with Cross Rod VA6156-XX=Bishop Twin Pole Mount Arm VA6157-XX=Bishop Twin Pole Mount Arm with Cross Rods VA6158-XX=Traditional Single Pole Mount Arm VA6159-XX= Traditional Single Pole Mount Arm with Rounded Upper Bar VA6160-XX= Traditional Single Pole Mount Arm with Rounded Lower Bar 16 VA6161-XX= Traditional Single Pole Mount Arm with 45 Upper Bar VA6162-XX= Traditional Single Pole Mount Arm with 45 Lower Bar 16 VA6163-XX= Traditional Single Pole Mount Arm with 45 Upper Strap VA6165-XX= Traditional Twin Pole Mount Arm VA6166-XX= Traditional Twin Pole Mount Arm with Rounded Upper Bars VA6167-XX= Traditional Twin Pole Mount Arm with Rounded Lower Bars 16 VA6168-XX= Traditional Twin Pole Mount Arm with 45 Upper Bars VA6169-XX= Traditional Twin Pole Mount Arm with 45 Lower Bars 16 VA6170-XX= Traditional Twin Pole Mount Arm with 45 Upper Straps VA6171-XX=Mast Arm Adapter VA6101-XX=Bishop Wall Mount Arm VA6102-XX=Bishop Wall Mount Arm with Cross Rod VA6103-XX=Traditional Wall Mount Arm VA6104-XX=Traditional Wall Mount Arm with 45 Strap VA6105-XX=Bishop Single Pole Mount Arm VA6106-XX=Bishop Single Pole Mount Arm with Cross Rod VA6107-XX=Bishop Twin Pole Mount Arm VA6108-XX=Bishop Twin Pole Mount Arm with Cross Rods VA6109-XX=Traditional Single Pole Mount Arm VA6110-XX= Traditional Single Pole Mount Arm with Rounded Upper Bar VA6111-XX= Traditional Single Pole Mount Arm with Rounded Lower Bar 16 VA6112-XX= Traditional Single Pole Mount Arm with 45 Upper Bar VA6113-XX= Traditional Single Pole Mount Arm with 45 Lower Bar 16 VA6114-XX= Traditional Single Pole Mount Arm with 45 Upper Strap VA6116-XX= Traditional Twin Pole Mount Arm VA6117-XX= Traditional Twin Pole Mount Arm with Rounded Upper Bars VA6118-XX= Traditional Twin Pole Mount Arm with Rounded Lower Bars 16 VA6119-XX= Traditional Twin Pole Mount Arm with 45 Upper Bars VA6120-XX= Traditional Twin Pole Mount Arm with 45 Lower Bars 16 VA6121-XX= Traditional Twin Pole Mount Arm with 45 Upper Straps VA6122-XX=Mast Arm Adapter OA/RA1016=NEMA Twistlock Photocontrol - Multi-Tap OA/RA1027=NEMA Twistlock Photocontrol - 480V OA/RA1201=NEMA Twistlock Photocontrol - 347V OA/RA1013=Photocontrol Shorting Cap 17, 18 Accessory Options V=Victorian Finial M= Finial A=Architectural Finial N=Nostalgic Finial R=NEMA Twistlock Photocontrol Receptacle 19 NOTES: 1. Arm not included. Use with Invue brand arms. See accessories. 2. All HID lamps are medium-base. 3. Available in Type 3S, 4S and 5S, and all vertical optical systems only. 4. Nominal M.O.L lamp length of 57W CFL not to exceed 7". 5. CF ballasts are 120 through 277V. Specify with UNV voltage designation. 6. Products also available in non-us voltages and 50Hz for international markets. Consult factory for availability and ordering information. 7. Dual-tap is 120/277V wired 277V. 8. Multi-tap is 120/208/240/277V wired 277V. 9. Triple-tap is 120/277/347V wired 347V. 10. Maximum wattage of 100W HID. Not available with wire guard. 11. Custom and RAL color matching available upon request. Consult your lighting representative at for more information. 12. Quartz options not available with SL optic or vertical lamped optical systems. 13. House side shield available on horizontally lamped 2S, 3S and 4S optical systems only. 14. Minimum pendant length is 9-1/. Length's over 4' Consult your lighting representative at for more information. Includes 3/4" pendant pipe in specified length, swivel hanger and canopy cover. Swivel under canopy uses 3/4" NPT thread, fixture head uses 3/4" NPSM, 2-3/4" long thread. "PM" option must be used with Invue pendant kit only. 15. Replace XX with color suffix. 16. Requires use of 4" O.D. round straight pole. 17. Add as suffix to accessory. Example: VA6109-BK-R. 18. Finials compatible with traditional arms only. 19. Not compatible with finials, bishop wall mount arms or pendant mounting.

3 CONFIGURATIONS HOUSING MID SECTION SHADE MOUNTING OPTION 8-5/8" H x 8-3/4" W Solid 3-7/16" H x 9-15/16" W Straight Narrow 6-5/8" H x 19-1/8" W Bell 8" H x 24" W Height from ceiling equals calculated height of fixture plus pendant length and 7/8" Solid Rings 3-7/16" H x W 9-3/8" H x 8-7/8" W Straight Wide 5-1/8" H x 23-15/16" W Flute 6" H x 22-1/ W

4 MOUNTING ACCESSORIES Pole mount arms are designed to fit both medium ECM/EMM housings. (Only these arms are compatible with the Epic luminaire). Arms feature a precision welded cast aluminum mounting hub for attachment of fixture head to arm with four stainless steel fasteners. Wall mount arms compliment pole mount luminaires and attractively transition fixture scale in lower mounting height pedestrian environments. Wall mount arms are designed to fit both medium ECM/EMM housings. Arms feature a precision welded cast aluminum mounting hub for attachment of fixture head to arm with four stainless steel fasteners. 33-1/ [852mm] 33-1/ [852mm] 6 [1575mm] 6 [1575mm] BISHOP SINGLE POLE VA6105 (), VA6154 () Weight: 24 lbs. E.P.A: 0.92 BISHOP SINGLE POLE WITH CROSS ROD VA6106 (), VA6155 () Weight: 25 lbs. E.P.A: 0.98 BISHOP TWIN POLE VA6107 (), VA6156 () Weight: 37 lbs. E.P.A: 1.43 BISHOP TWIN POLE MOUNT ARM WITH CROSS RODS VA6108 (), VA6157 () Weight: 39 lbs. E.P.A: /8" [911mm] 35-7/8" [911mm] VA6109 (), VA6158 () Weight: 20 lbs. E.P.A: 0.86 UPPER BAR VA6110 (), VA6159 () Weight: 28 lbs. E.P.A: 1.4 LOWER BAR VA6111 (), VA6160 () Weight: 25 lbs. E.P.A: 1.16 WITH 45 UPPER BAR VA6112 (), VA6161 () Weight: 28 lbs. E.P.A: 1.38 WITH 45 LOWER BAR VA6113 (), VA6162 () Weight: 24 lbs. E.P.A: 1.17 WITH 45 UPPER STRAP VA6114 (), VA6163 () Weight: 24 lbs. E.P.A: 1.17 VA6116 (), VA6165 () Weight: 30 lbs. E.P.A: 1.44

5 MOUNTING ACCESSORIES UPPER BARS VA6117 (), VA6166 () Weight: 43 lbs. E.P.A: 2.28 LOWER BARS VA6118 (), VA6167 () Weight: 40 lbs. E.P.A: 2.04 WITH 45 UPPER BARS VA6119 (), VA6168 () Weight: 43 lbs. E.P.A: /8" [211mm] NEMA Photocontrol Receptacle NEMA Photocontrol Receptacle 8-3/8" [211mm] WITH 45 LOWER BARS VA6120 (), VA6169 () Weight: 40 lbs. E.P.A: 2.0 WITH 45 UPPER STRAPS VA6121 (), VA6170 () Weight: 37 lbs. E.P.A: 1.81 MAST ARM ADAPTER VA6122 (), VA6171 () Secures fixture to nominal pipe (2-3/8" horizontal O.D.) Weight: 4 lbs. NEMA TWISTLOCK PHOTOCONTROL (R) Order separately (Not compatible with finials or wall mount bishop arms) Wall Mount Accessories 30-5/8" [777mm] 30-5/8" [777mm] 51-3/8" [1306mm] 51-3/8" [1306mm] 10-1/ [267mm] 11-3/4" [298mm] 11-3/4" [298mm] 28-1/ [723mm] 28-1/ [723mm] BISHOP WALL VA6101 (), VA6150 () Weight: 16 lbs. BISHOP WALL WITH CROSS ROD VA6102 (), VA6151 () Weight: 17 lbs. TRADITIONAL WALL VA6103 (), VA6152 () Weight: 17 lbs. TRADITIONAL WALL WITH 45 STRAP VA6104 (), VA6153 () Weight: 18 lbs.