DuroSite TM Series LED High Bay. for Industrial & Commercial Applications.

Transcription

1 DuroSite TM Series LED High Bay for Industrial & Commercial Applications.dialight.com 1

2 DuroSite TM Series LED High Bay Features & Benefits 80% lumen maintenance after 60,000 hours 5 year arranty Up to 79 lm/ Significant energy savings Instant on/off Maintenance free Mercury free Superior light quality No UV or IR Produces minimal heat compared to competitive fixtures Simple installation Universal input: ( VAC), 50/60Hz or ( VAC), 50/60Hz Resistant to shock and vibration Temperature compensation technology for long life Copper free aluminum Typical Applications Warehouse Manufacturing Food Processing Cold Storage Canopy Gymnasium Confrence Centers Floodlighting Rockline Industries Manufacturing Facility G.S. Dunn Limited Food Processing Facility MedSafe Warehouse Facility Vie the full case studies at: G.S. Dunn Limited -.dialight.com/nes/details/gsdunn_case_study Rockline Industries -.dialight.com/nes/details/rockline_case_study Frontline international -.dialight.com/nes/details/frontline_case_study 2.dialight.com

3 Dialight s Durosite LED High Bay fixture as designed specifically to replace conventional lighting in a ide variety of industrial applications; both indoor and outdoor. Its lo profile light eight design and versatile mounting options make it ideal for many applications such as arehouse, garage, aisle, cold storage, bridge, tunnel and general area lighting. All of Dialight s long life LED luminaires are designed to meet the most demanding specification criteria hile offering maximum energy savings, reduced maintenance costs, and a superior quality of light. TM DuroSite (6) 1/4-20 SELF TAPPING SCREW HOLE 1.88 [47.75] Ordering Info: 6.88 [174.75] Part Number 1.95 [49.53] 3.00 [76.20] 5/16-18 X.75 THREADED (2) Series LED High Bay Fixture [406.40] [406.40] UL-1598 Dry Locations (Acrylic Lens) 10 [3.05m] cord Patent Pending Certifications UL-1598A IP-66, NEMA - 4X Marine Wet Locations (Polycarbonate Lens) 3 Mechanical Information: Fixture Weight: 17 lbs (7.7 kg) Mounting: (1) 3/4 NPT or (2) 5/16-18 x.75 UNC Electrical specifications: Operating Voltage 2 : VAC, 50/60 Hz or VAC, 50/60 Hz Total System 150W Poer Consumption: Operating Temp: -40 F to +149 F (-40 C to +65 C) Harmonics: IEC Surge / Lightning 1 kv line to line Protection: 2 kv line to ground THD: <5% (120VAC) <10% (230/240VAC) <12% (277VAC) <15% ( VAC) Poer Factor: > 0.95 Construction: Body: Poder coated aluminum Finish: Epoxy polyester poder coated for superior corrosion resistance 5 Lens: Acrylic (UL1598 Dry Location versions) Polycarbonate (UL1598A versions) (All lens are diffused) Photometric Information: CRI (typ): 72 CCT (typ): Optical Pattern Circular Oval 6000K (cool hite) 4500K (neutral hite) Initial Fixture Lumens Typical (±10%) 4 Lumens Per Watt HB1C4N X X 11, HB6C4M X X 11, HB5C4M X X 10, HB1C4J X X 11, HB5C4J X X 10, HB3C4L X X 8, HB2C4M X X 10, HB7C4M X X 10, HB2C4K X X 10, HB4C4L X X 8, Part numbers listed in the table above are VAC. For VAC version replace the 5th character ith a 5. EX: HB1C4N ( VAC) becomes HB1C5N ( VAC). 3 Units meet IP-66 hen installed using conduit or an IP66 approved cable gland at the 3/4 NPT. Dialight offers IP-66 approved cable glands as part of accessories HBXW2 and HBXCG. 4 Initial fixture lumens based on temperatures up to 113 F (45 C) Part numbers listed above table are cool hite. For neutral hite version replace the 4 th character ith N Ex: HB1C4N become HB1N4N. 5 Part numbers listed in the tables above come ith a flat lens. For models ith Polycarbonate Flat Lens they can be ordered ith a Polycarbonate Dome lens; replace 3rd numeral ith a L Ex: HB2C4M becomes HBLC4M.dialight.com 3

4 DuroSite TM LED High Bay Fixture Options and Accessories Occupancy Sensor Version Dialight offers a series of High Bay products ith an attached occupancy sensor. The occupancy sensor leverages the High Bay s instant-on and instant-off capability to increase energy savings and enhance ROI. Other industrial lighting sources such as HID fixtures do not offer instant-on capability. Mechanical, Electrical and Photometric information is the same as on page 3 except here detail is provided Weight: 19lbs (8.6kg) Patent Pending Sensor Mounting: Attached to the base of the neck using a semi-rigid flexible conduit Occupancy Sensor: Leviton OSFHU - C T W ( VAC) or C4W (480VAC) Sensor Timing: 30 seconds to 20 minutes Sensor Lens Options: Narro lens ith a hite trim ring Wide lens ith a blue trim ring Oval lens ith a black trim ring Operating Temperature 2 : -14 o F o F (-10 o C + 65 o C) Features and Benefits No additional electrical connections required for installation Flexible conduit permitting the positioning of the occupancy sensor for optimal coverage Interchangeable sensor lens for high bay, lo bay, or aisle applications Ordering Info: Part Number Certifications UL-1598 Dry Location (Acrylic Lens) Optical Pattern Circular Oval Initial Fixture Lumens Typical (±10%) 4 Lumens Per Watt HB1C4T X X 11, HB6C4T X X 11, HB5C4T X X 10, HB1C4S X X 11, HB5C4S X X 10, HB3C4R X X 8, Mec hanical, Electrical and Photometric specifications are the same as page 3 except as noted o F o F (-40 o C + 65 o C) polycarbonate lens units (consult factory) 4 Initial fixture lumens based on temperatures up to 113 F (45 C) Part numbers listed above table are cool hite. For neutral hite version replace the 4 th character ith N Ex: HB1C4N become HB1N4N. 4.dialight.com

5 DuroSite TM Series LED High Bay Fixture Options and Accessories Variable Dimming Version: 0-10 VDC Application: Dialight offers a series of High Bay products ith ACTIVE Dimming. Dimming permits the user to select a specific light output and poer consumption to meet their requirements. The reduction in light output and poer consumption are approximately proportional. Reducing the light output by 50% ill reduce the poer consumption by 50%. LEDs are particularly ell suited for dimming as compared to other industrial light sources. Mechanical, Electrical and Photometric information is the same as on page 3 except here detail is provided Patent Pending Variable Dimming Cable Poer Cable To conductor cable Three conductor cable 8.00 (203,2) Dimming Cable Position Variable Dimming Control: Dimming Range: Features and Benefits Side of the neck through a cable gland 0-10 VDC active 10 VDC = 100% light output 0 VDC = 15% light output 1/4-20 SELF - TAPPING SCREW HOLE (6) 5/16-18 X.75 THREADED HOLE (2) 10 plenum rated dimming control cable pre-installed Dimming cabling independent of fixture iring Multiple High Bays can be connected to the same dimmer Ordering Info: Part Number 10 (3.05m) DIMMIMG CABLE UL-1598 Dry Locations (Acrylic Lens) Ø 16.0 (406) Certifications 10 (3.05m) POWER CORD 1.91 (48,6) 3.13 (79,4) UL-1598A IP-66, NEMA - 4X Marine Wet Locations (Polycarbonate Lens) 2 Lens Optical Pattern Initial Fixture Total Fixture Lumens Typical (±10%) 3 Poer Consumption Clear Diffused Circular Oval Min Max Min Max HB1C4Y X X X 2,298 11, HB6C4Y X X X 2,291 11, HB5C4Y X X X 2,135 10, HB1C4X X X X 2,214 11, HB5C4X X X X 2,108 10, W 150 W HB3C4W X X X 1,621 8, HB2C4Y X X X 2,090 10, HB7C4Y X X X 2,086 10, HB2C4X X X X 2,073 10, HB4C4W X X X 1,635 8, Units meet IP-66 hen installed using conduit or an IP66 approved cable gland at the 3/4 NPT. Dialight offers IP-66 approved cable glands as part of accessories HBXW2 and HBXCG. 3 Initial fixture lumens based on temperatures up to 113 F (45 C) Part numbers listed above table are cool hite. For neutral hite version replace the 4 th character ith N Ex: HB1C4N become HB1N4N. Polycarbonate Dome lens; replace 3rd numeral ith a L Ex: HB2C4M becomes HBLC4M.dialight.com 5 May also be configured to operate in a single STEP Dimming configuration STEP Dimming Mode The variable dimming High Bays may also be configured to operate in a single STEP Dimming configuration. When the dimming control conductors are connected together, the light output ill be reduced to approximately 15% of the maximum light output. The total fixture poer consumption ill also be reduced to approximately 20% (30 W). Connecting the leads together can be accomplished ith a common all sitch. Lumens per Watt

6 DuroSite TM Series LED High Bay Fixture Options and Accessories Part Number Description Kit Includes No Part Number Pendant Mount (Conduit supplied by installer) Conduit supplied by installer HBXW2 Sivel Bracket and Cable Gland Sivel Bracket Bracket to fixture hardare Cable Gland (1/2 ) Reducer (3/4 to 1/2 ) HBXW3 Sivel Bracket Sivel Bracket Bracket to Fixture Hardare HBXCU Ceiling Mount Sivel Hanger Cover 3" Conduit Nipple HBXCG Cable Gland Cable Gland (1/2 ) Reducer (3/4 to 1/2 ) HBXL Loop Hanger Loop (GE LOOPM353) HBXH Hook Hanger Hook (GE HOOKM353) HZC3000 Stanchion Mount Bracket 1 ¼ pipe (Can be used ith HBXW3) Stanchion bracket HBXT2 Junction Box ith Transformer VAC to 240VAC NEMA Box ith Integrated Transformer HBXLENA Acrylic Lens, Clear (Cut) Lens, replacement scres, gasket HBXLENP Polycarbonate Lens Lens, replacement scres, gasket LBXLENP Dome Lens (Use only on Polycarbonate lens models) Lens, replacement scres, gasket 6.dialight.com

7 DuroSite TM Series LED High Bay Fixture Options and Accessories HBXW2 - Sivel Bracket and Cable Gland HBXCU - Ceiling Mount CUSTOMER SUPPLIED 4" SQUARE BOX AND CONDUIT SWIVEL MOUNT 3/4"X3" RIGID CONDUIT 8.50 [215.90] [254.00] [406.40] HBXCG - Cable Gland LBXLENP - Dome Lens 10 [3.05m] cord CABLE GLAND 5.04 (127,9) 8.19 (208) 2.00 [50.80] Ø (263,5) [406.40] 5.00 [127.00] 3.00 [76.20] (412,8) BETWEEN BRACKET MOUNT LOCATIONS (5/16-18UNC) Ø (406,4) Dimensions in inches [mm].dialight.com 7

8 Notes Dialight reserves the right to make changes at any time in order to supply the best product possible. The most current version of this document ill alays be available at:.dialight.com/assets/brochures_and_catalogs/illumination/mdexhbx001.pdf MDEXHBX001_F.dialight.com