Obsolete Product(s) - Obsolete Product(s)

Size: px
Start display at page:

Download "Obsolete Product(s) - Obsolete Product(s)"

Transcription

1 DUAL D TYPE FLIP FLOP WITH PRESET AND CLEAR HIGH SPEED : f MAX = 48MHz (TYP.) at V CC = 4.5V LOW POWER DISSIPATION: I CC =2µA(MAX.) at T A =25 C COMPATIBLE WITH TTL OUTPUTS : V IH = 2V (MIN.) V IL = 0.8V (MAX) BALANCED PROPAGATION DELAYS: t PLH t PHL SYMMETRICAL OUTPUT IMPEDANCE: I OH = I OL = 4mA (MIN) PIN AND FUNCTION COMPATIBLE WITH 74 SERIES 74 DESCRIPTION The M74HCT74 is an high speed CMOS DUAL D TYPE FLIP FLOP WITH CLEAR fabricated with silicon gate C 2 MOS technology. A signal on the D INPUT (nd) is transferred on the Q OUTPUT during the positive going transition of the clock pulse. CLEAR (CLR) and PRESET (PR) are independent of the clock and accomplished by a low on the appropriate input. PIN CONNECTION AND IEC LOGIC SYMBOLS ORDER CODES TSSOP PACKAGE TUBE T & R DIP M74HCT74B1R SOP M74HCT74M1R M74HCT74RM13TR TSSOP M74HCT74TTR The M74HCT74 is designed to directly interface HSC 2 MOS systems with TTL and NMOS components. All inputs are equipped with protection circuits against static discharge and transient excess voltage. DIP SOP August /10

2 INPUT AND OUTPUT EQUIVALENT CIRCUIT PIN DESCRIPTION TRUTH TABLE X : Don t Care LOGIC DIAGRAM INPUTS PIN No SYMBOL NAME AND FUNCTION Asynchronous Reset - 1,13 1CLR, 2CLR Direct Input 2, 12 1D, 2D Data Inputs 3, 11 1CK, 2CK Clock Input (LOW-to-HIGH, Edge-Triggered) 4, 10 1PR, 2PR Asynchronous Set - Direct Input 5, 9 1Q, 2Q True Flip-Flop Outputs 6, 8 1Q, 2Q Complement Flip-Flop Outputs 7 GND Ground (0V) 14 Vcc Positive Supply Voltage OUTPUTS CLR PR D CK Q Q FUNCTION L H X X L H CLEAR H L X X H L PRESET L L X X H H ---- H H L L H ---- H H H H L ---- H H X Q n Q n NO CHANGE This logic diagram has not be used to estimate propagation delays 2/10

3 ABSOLUTE MAXIMUM RATINGS Symbol Parameter Value Unit V CC Supply Voltage -0.5 to +7 V V I DC Input Voltage -0.5 to V CC V V O DC Output Voltage -0.5 to V CC V I IK DC Input Diode Current ± 20 ma I OK DC Output Diode Current ± 20 ma I O DC Output Current ± 25 ma I CC or I GND DC V CC or Ground Current ± 50 ma P D Power Dissipation 500(*) mw T stg Storage Temperature -65 to +150 C T L Lead Temperature (10 sec) 300 C Absolute Maximum Ratings are those values beyond which damage to the device may occur. Functional operation under these conditions is not implied (*) 500mW at 65 C; derate to 300mW by 10mW/ C from 65 C to 85 C RECOMMENDED OPERATING CONDITIONS Symbol Parameter Value Unit V CC Supply Voltage 4.5 to 5.5 V V I Input Voltage 0 to V CC V V O Output Voltage 0 to V CC V T op Operating Temperature -55 to 125 C t r, t f Input Rise and Fall Time (V CC = 4.5 to 5.5V) 0 to 500 ns DC SPECIFICATIONS Symbol V IH V IL V OH Parameter High Level Input Voltage Low Level Input Voltage V CC (V) 4.5 to to 5.5 High Level Output Voltage 4.5 Test Condition Value T A = 25 C -40 to 85 C -55 to 125 C Min. Typ. Max. Min. Max. Min. Max. Unit V V V OL I I I CC I CC Low Level Output Voltage 4.5 Input Leakage Current Quiescent Supply Current Additional Worst Case Supply Current I O =-20 µa I O =-4.0 ma I O =20 µa I O =4.0 ma V I = V CC or GND ± 0.1 ± 1 ± 1 µa 5.5 V I = V CC or GND µa 5.5 Per Input pin V I = 0.5V or V I = 2.4V Other Inputs at V CC or GND I O = ma V V 3/10

4 AC ELECTRICAL CHARACTERISTICS (C L = 50 pf, Input t r = t f = 6ns) Test Condition Value Symbol t TLH t THL t PLH t PHL t PLH t PHL f MAX t W(H) t W(L) t W(L) t s t h t REM Parameter V CC (V) CAPACITIVE CHARACTERISTICS T A = 25 C -40 to 85 C -55 to 125 C Min. Typ. Max. Min. Max. Min. Max. Output Transition Time ns Propagation Delay Time (CLOCK-Q) ns Propagation Delay Time (CL,PR - Q,Q) ns Maximum Clock Frequency MHz Minimum Pulse Width (CLOCK) ns Minimum Pulse Width (CLR, PR) ns Minimum Set-Up Time ns Minimum Hold Time ns Minimum Removal Time (CLR, PR to ns CLOCK) Test Condition 1) C PD is defined as the value of the IC s internal equivalent capacitance which is calculated from the operating current consumption without load. (Refer to Test Circuit). Average operating current can be obtained by the following equation. I CC(opr) = C PD x V CC x f IN + I CC /2 (per FLIP/ FLOP) Value Symbol Parameter V CC T A = 25 C -40 to 85 C -55 to 125 C Unit (V) Min. Typ. Max. Min. Max. Min. Max. C IN Input Capacitance pf C PD Power Dissipation Capacitance (note 32 pf 1) Unit 4/10

5 TEST CIRCUIT C L = 50pF or equivalent (includes jig and probe capacitance) R T = Z OUT of pulse generator (typically 50Ω) WAVEFORM 1 : PROPAGATION DELAY, MINIMUM SETUP AND HOLD TIME, CK MINIMUM PULSE WIDTH AND MAXIMUM FREQUENCY (f=1mhz; 50% duty cycle) 5/10

6 WAVEFORM 2 : MINIMUM PULSE WIDTH, PROPAGATION DELAY (f=1mhz; 50% duty cycle) WAVEFORM 3 : MINIMUM PULSE WIDTH AND REMOVAL TIME (f=1mhz; 50% duty cycle) 6/10

7 Plastic DIP-14 MECHANICAL DATA DIM. mm. inch MIN. TYP MAX. MIN. TYP. MAX. a B b b D E e e F I L Z P001A 7/10

8 SO-14 MECHANICAL DATA DIM. mm. inch MIN. TYP MAX. MIN. TYP. MAX. A a a b b C c1 45 (typ.) D E e e F G L M S 8 (max.) PO13G 8/10

9 TSSOP14 MECHANICAL DATA DIM. mm. inch MIN. TYP MAX. MIN. TYP. MAX. A A A b c D E E e 0.65 BSC BSC K L A A2 A1 b e D c K L E E1 PIN 1 IDENTIFICATION D 9/10

10 Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is a registered trademark of STMicroelectronics 10/ STMicroelectronics - Printed in Italy - All Rights Reserved STMicroelectronics GROUP OF COMPANIES Australia - Brazil - China - Finland - France - Germany - Hong Kong - India - Italy - Japan - Malaysia - Malta - Morocco Singapore - Spain - Sweden - Switzerland - United Kingdom

M74HCT86TTR QUAD EXCLUSIVE OR GATE

M74HCT86TTR QUAD EXCLUSIVE OR GATE QUAD EXCLUSIVE OR GATE HIGH SPEED: t PD = 15ns (TYP.) at V CC = 4.5V LOW POWER DISSIPATION: I CC =1µA(MAX.) at T A =25 C COMPATIBLE WITH TTL OUTPUTS : V IH = 2V (MIN.) V IL = 0.8V (MAX) SYMMETRICAL OUTPUT

More information

M74HC4078TTR 8-INPUT NOR/OR GATE

M74HC4078TTR 8-INPUT NOR/OR GATE 8-INPUT NOR/OR GATE HIGH SPEED: t PD = 10ns (TYP.) at V CC = 6V LOW POWER DISSIPATION: I CC = 1µA(MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH = V NIL = 28 % V CC (MIN.) SYMMETRICAL OUTPUT IMPEDANCE:

More information

M74HC147TTR 10 TO 4 LINE PRIORITY ENCODER

M74HC147TTR 10 TO 4 LINE PRIORITY ENCODER 10 TO 4 LINE PRIORITY ENCODER HIGH SPEED: t PD = 15ns (TYP.) at V CC = 6V LOW POWER DISSIPATION: I CC = 4µA(MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH = V NIL = 28 % V CC (MIN.) SYMMETRICAL OUTPUT IMPEDANCE:

More information

Obsolete Product(s) - Obsolete Product(s)

Obsolete Product(s) - Obsolete Product(s) 4-BIT BINARY FULL ADDER HIGH SPEED : t PD = 17 (TYP.) at V CC = 6V LOW POWER DISSIPATION: I CC =4µA(MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH = V NIL = 28 % V CC (MIN.) SYMMETRICAL OUTPUT IMPEDANCE:

More information

HCF4081B QUAD 2 INPUT AND GATE

HCF4081B QUAD 2 INPUT AND GATE QUAD 2 INPUT AND GATE MEDIUM SPEED OPERATION : t PD = 60ns (Typ.) at 10 QUIESCENT CURRENT SPECIFIED UP TO 20 5, 10 AND 15 PARAMETRIC RATINGS INPUT LEAKAGE CURRENT I I = 100nA (MAX) AT DD = 18 T A = 25

More information

HCF4017B DECADE COUNTER WITH 10 DECODED OUTPUTS

HCF4017B DECADE COUNTER WITH 10 DECODED OUTPUTS DECADE COUNTER WITH 10 DECODED OUTPUTS MEDIUM SPEED OPERATION : 10 MHz (Typ.) at V DD = 10V FULLY STATIC OPERATION STANDARDIZED SYMMETRICAL OUTPUT CHARACTERISTICS QUIESCENT CURRENT SPECIFIED UP TO 20V

More information

Obsolete Product(s) - Obsolete Product(s)

Obsolete Product(s) - Obsolete Product(s) DECADE COUNTER WITH 10 DECODED OUTPUTS MEDIUM SPEED OPERATION : 10 MHz (Typ.) at V DD = 10V FULLY STATIC OPERATION STANDARDIZED SYMMETRICAL OUTPUT CHARACTERISTICS QUIESCENT CURRENT SPECIFIED UP TO 20V

More information

HCF4001B QUAD 2-INPUT NOR GATE

HCF4001B QUAD 2-INPUT NOR GATE QUAD 2-INPUT NOR GATE PROPAGATION DELAY TIME: t PD = 50ns (TYP.) at V DD = 10V C L = 50pF BUFFERED INPUTS AND OUTPUTS STANDARDIZED SYMMETRICAL OUTPUT CHARACTERISTICS QUIESCENT CURRENT SPECIFIED UP TO 20V

More information

HCF4027B DUAL J-K MASTER SLAVE FLIP-FLOP

HCF4027B DUAL J-K MASTER SLAVE FLIP-FLOP DUAL J-K MASTER SLAVE FLIP-FLOP SET RESET CAPABILITY STATIC FLIP-FLOP OPERATION - RETAINS STATE INDEFINETELY WITH CLOCK LEVEL EITHER "HIGH" OR "LOW" MEDIUM-SPEED OPERATION - 16MHz (Typ. clock toggle rate

More information

Obsolete Product(s) - Obsolete Product(s)

Obsolete Product(s) - Obsolete Product(s) PRESETTABLE UP/DOWN COUNTERS (DUAL CLOCK WITH RESET) BINARY TYPE INDIVIDUAL CLOCK LINES FOR COUNTING UP OR COUNTING DOWN SYNCHRONOUS HIGH-SPEED CARRY AND BORROW PROPAGATION DELAYS FOR CASCADING ASYNCHRONOUS

More information

HCF4070B QUAD EXCLUSIVE OR GATE

HCF4070B QUAD EXCLUSIVE OR GATE QUAD EXCLUSIE OR GATE MEDIUM-SPEED OPERATION t PHL = t PLH = 70ns (Typ.) at CL = 50 pf and DD = 10 QUIESCENT CURRENT SPECIFIED UP TO 20 5, 10 AND 15 PARAMETRIC RATINGS INPUT LEAKAGE CURRENT I I = 100nA

More information

. HIGH SPEED .LOW POWER DISSIPATION .COMPATIBLE WITH TTL OUTPUTS M54HCT27 M74HCT27 TRIPLE 3-INPUT NOR GATE. tpd = 9 ns (TYP.

. HIGH SPEED .LOW POWER DISSIPATION .COMPATIBLE WITH TTL OUTPUTS M54HCT27 M74HCT27 TRIPLE 3-INPUT NOR GATE. tpd = 9 ns (TYP. M54HCT27 M74HCT27 TRIPLE 3-INPUT NOR GATE. HIGH SPEED tpd = 9 ns (TYP.) AT VCC =5V.LOW POWER DISSIPATION I CC =1µA (MAX.) AT T A =25 C.COMPATIBLE WITH TTL OUTPUTS VIH = 2V (MIN.) VIL = 0.8V (MAX) OUTPUT

More information

HCF4516B PRESETTABLE BINARY UP/DOWN COUNTER

HCF4516B PRESETTABLE BINARY UP/DOWN COUNTER PRESETTABLE BINARY UP/DOWN COUNTER MEDIUM SPEED OPERATION : 8 MHz (Typ.) at 10V SYNCHRONOUS INTERNAL CARRY PROPAGATION RESET AND PRESET CAPABILITY STANDARDIZED SYMMETRICAL OUTPUT CHARACTERISTICS QUIESCENT

More information

Obsolete Product(s) - Obsolete Product(s)

Obsolete Product(s) - Obsolete Product(s) SYNCHRONOUS PROGRAMMABLE 4-BIT BINARY COUNTER WITH ASYNCHRONOUS CLEAR INTERNAL LOOK-AHEAD FOR FAST COUNTING CARRY OUTPUT FOR CASCADING SYNCHRONOUSLY PROGRAMMABLE LOW-POWER TTL COMPATIBILITY STANDARDIZED

More information

Obsolete Product(s) - Obsolete Product(s)

Obsolete Product(s) - Obsolete Product(s) BCD TO DECIMAL DECODER BCD TO DECIMAL DECODING OR BINARY TO OCTAL DECODING HIGH DECODED OUTPUT DRIVE CAPABILITY "POSITIVE LOGIC" INPUTS AND OUTPUTS: DECODED OUTPUTS GO HIGH ON SELECTION MEDIUM SPEED OPERATION

More information

. HIGH SPEED .LOW POWER DISSIPATION .HIGH NOISE IMMUNITY M54HC74 M74HC74 DUAL D TYPE FLIP FLOP WITH PRESET AND CLEAR. fmax = 71 MHz (TYP.

. HIGH SPEED .LOW POWER DISSIPATION .HIGH NOISE IMMUNITY M54HC74 M74HC74 DUAL D TYPE FLIP FLOP WITH PRESET AND CLEAR. fmax = 71 MHz (TYP. M54HC74 M74HC74 DUAL D TYPE FLIP FLOP WITH PRESET AND CLEAR. HIGH SPEED fmax = 71 MHz (TYP.) AT VCC =5V.LOW POWER DISSIPATION I CC =2µA (MAX.) AT T A =25 C.HIGH NOISE IMMUNITY VNIH =VNIL =28%VCC (MIN.)

More information

.LOW POWER DISSIPATION .HIGH NOISE IMMUNITY M74HC154 4 TO 16 LINE DECODER/DEMULTIPLEXER. HIGH SPEED tpd = 15 ns (TYP.) at VCC =5V

.LOW POWER DISSIPATION .HIGH NOISE IMMUNITY M74HC154 4 TO 16 LINE DECODER/DEMULTIPLEXER. HIGH SPEED tpd = 15 ns (TYP.) at VCC =5V . HIGH SPEED tpd = 15 ns (TYP.) at VCC =5V.LOW POWER DISSIPATION I CC =4µA (MAX.) at T A =25 C.HIGH NOISE IMMUNITY VNIH =VNIL =28%VCC (MIN.) OUTPUT DRIVE CAPABILITY 15 LSTTL LOADS SYMMETRICAL OUTPUT IMPEDANCE

More information

HCF4010B HEX BUFFER/CONVERTER (NON INVERTING)

HCF4010B HEX BUFFER/CONVERTER (NON INVERTING) HEX BUFFER/CONVERTER (NON INVERTING) PROPAGATION DELAY TIME: t PD = 50ns (Typ.) at V DD = 10V C L = 50pF HIGH TO LOW LEVEL LOGIC CONVERSION MULTIPLEXER: 1 TO 6 OR 6 TO 1 HIGH "SINK" AND "SOURCE" CURRENT

More information

. HIGH SPEED .COMPATIBLE WITH TTL OUTPUTS . LOW POWER DISSIPATION .OUTPUT DRIVE CAPABILITY M74HCT651 M74HCT652

. HIGH SPEED .COMPATIBLE WITH TTL OUTPUTS . LOW POWER DISSIPATION .OUTPUT DRIVE CAPABILITY M74HCT651 M74HCT652 M74HCT651 M74HCT652 HCT651 OCTAL BUS TRANSCEIVER/REGISTER (3-STATE, INV.) HCT652 OCTAL BUS TRANSCEIVER/REGISTER (3-STATE). HIGH SPEED fmax = 60 MHz (TYP.) AT VCC =5V.COMPATIBLE WITH TTL OUTPUTS V IH =

More information

HCF4056B BCD TO 7 SEGMENT DECODER /DRIVER WITH STROBED LATCH FUNCTION

HCF4056B BCD TO 7 SEGMENT DECODER /DRIVER WITH STROBED LATCH FUNCTION BCD TO 7 SEGMENT DECODER /DRIVER WITH STROBED LATCH FUNCTION QUIESCENT CURRENT SPECIF. UP TO 20V OPERATION OF LIQUID CRYSTALS WITH CMOS CIRCUITS PROVIDES ULTRA LOW POWER DISPLAY. EQUIVALENT AC OUTPUT DRIVE

More information

. HIGH SPEED .LOW POWER DISSIPATION .HIGH NOISE IMMUNITY M54HC112 M74HC112 DUAL J-K FLIP FLOP WITH PRESET AND CLEAR. fmax = 67 MHz (TYP.

. HIGH SPEED .LOW POWER DISSIPATION .HIGH NOISE IMMUNITY M54HC112 M74HC112 DUAL J-K FLIP FLOP WITH PRESET AND CLEAR. fmax = 67 MHz (TYP. M54HC112 M74HC112 DUAL J-K FLIP FLOP WITH PRESET AND CLEAR. HIGH SPEED fmax = 67 MHz (TYP.) AT VCC =5V.LOW POWER DISSIPATION I CC =2µAATT A =25 C.HIGH NOISE IMMUNITY VNIH =VNIL =28%VCC (MIN.) OUTPUT DRIVE

More information

HCF4028B BCD TO DECIMAL DECODER

HCF4028B BCD TO DECIMAL DECODER BCD TO DECIMAL DECODER BCD TO DECIMAL DECODING OR BINARY TO OCTAL DECODING HIGH DECODED OUTPUT DRIVE CAPABILITY "POSITIVE LOGIC" INPUTS AND OUTPUTS: DECODED OUTPUTS GO HIGH ON SELECTION MEDIUM SPEED OPERATION

More information

. HIGH SPEED .LOW POWER DISSIPATION .HIGH NOISE IMMUNITY M54HC147 M74HC TO 4 LINE PRIORITY ENCODER. tpd = 15 ns (TYP.

. HIGH SPEED .LOW POWER DISSIPATION .HIGH NOISE IMMUNITY M54HC147 M74HC TO 4 LINE PRIORITY ENCODER. tpd = 15 ns (TYP. M54HC147 M74HC147 10 TO 4 LINE PRIORITY ENCODER. HIGH SPEED tpd = 15 ns (TYP.) at VCC =5V.LOW POWER DISSIPATION I CC =4µA (MAX.) at T A =25 C.HIGH NOISE IMMUNITY VNIH =VNIL =28%VCC (MIN.) OUTPUT DRIVE

More information

Description. Table 1. Device summary. Order code Temperature range Package Packaging Marking M74HC4094RM13TR -55/+125 C SO16

Description. Table 1. Device summary. Order code Temperature range Package Packaging Marking M74HC4094RM13TR -55/+125 C SO16 8-bit SIPO shift latch register (3-state) SO16 TSSOP16 Applicatio Automotive Industrial Computer Coumer Datasheet - production data Features High speed: f MAX = 80 MHz (typ.) at V CC = 6 V Low power dissipation:

More information

HCF4033B DECADE COUNTER/DIVIDER WITH DECODED 7-SEGMENT DISPLAY OUTPUT AND RIPPLE BLANKING

HCF4033B DECADE COUNTER/DIVIDER WITH DECODED 7-SEGMENT DISPLAY OUTPUT AND RIPPLE BLANKING DECADE COUNTER/DIVIDER WITH DECODED 7-SEGMENT DISPLAY OUTPUT AND RIPPLE BLANKING COUNTER AND 7-SEGMENT DECODING IN ONE PACKAGE EASILY INTERFACED WITH 7-SEGMENT DISPLAY TYPES FULLY STATIC COUNTER OPERATION

More information

HCF40181B 4-BIT ARITHMETIC LOGIC UNIT

HCF40181B 4-BIT ARITHMETIC LOGIC UNIT 4-BIT ARITHMETIC LOGIC UNIT FULL LOOK-AHEAD CARRY FOR SPEED OPERATIONS ON LONG WORDS GENERATES 16 LOGIC FUNCTIONS OF TWO BOOLEAN VARIABLES GENERATES 16 ARITHMETIC FUNCTIONS OF TWO 4-BIT BINARY WORDS A

More information

. HIGH SPEED .LOW POWER DISSIPATION .HIGH NOISE IMMUNITY M54/M74HC192 M54/M74HC193

. HIGH SPEED .LOW POWER DISSIPATION .HIGH NOISE IMMUNITY M54/M74HC192 M54/M74HC193 M54/M74HC192 M54/M74HC193 HC192 - SYNCHRONOUS UP/DOWN DECADE COUNTER HC193 - SYNCHRONOUS UP/DOWN BINARY COUNTER. HIGH SPEED fmax = 54 MHz (TYP.) AT VCC =5V.LOW POWER DISSIPATION I CC =4µA (MAX.) AT T A

More information

. HIGH SPEED .LOW POWER DISSIPATION M54HCT240/241/244PU M74HCT240/241/244PU OCTAL BUS BUFFERS WITH PULL-UP INPUT NETWORK

. HIGH SPEED .LOW POWER DISSIPATION M54HCT240/241/244PU M74HCT240/241/244PU OCTAL BUS BUFFERS WITH PULL-UP INPUT NETWORK M54HCT240/241/244PU M74HCT240/241/244PU OCTAL BUS BUFFERS WITH PULL-UP INPUT NETWORK. HIGH SPEED t PD = 14 ns (TYP.) at V CC =5V.LOW POWER DISSIPATION I CCH = 200 µa (TYP.) at T A =25 o C.COMPATIBLE. WITH

More information

MM74HC273 Octal D-Type Flip-Flops with Clear

MM74HC273 Octal D-Type Flip-Flops with Clear MM74HC273 Octal D-Type Flip-Flops with Clear General Description The MM74HC273 edge triggered flip-flops utilize advanced silicon-gate CMOS technology to implement D-type flipflops. They possess high noise

More information

MM74HCT373 MM74HCT374 3-STATE Octal D-Type Latch 3-STATE Octal D-Type Flip-Flop

MM74HCT373 MM74HCT374 3-STATE Octal D-Type Latch 3-STATE Octal D-Type Flip-Flop 3-STATE Octal D-Type Latch 3-STATE Octal D-Type Flip-Flop General Description The MM74HCT373 octal D-type latches and MM74HCT374 Octal D-type flip flops advanced silicongate CMOS technology, which provides

More information

MM74HC174 Hex D-Type Flip-Flops with Clear

MM74HC174 Hex D-Type Flip-Flops with Clear Hex D-Type Flip-Flops with Clear General Description The MM74HC174 edge triggered flip-flops utilize advanced silicon-gate CMOS technology to implement D-type flipflops. They possess high noise immunity,

More information

Description. Table 1. Device summary. Order code Temperature range Package Packing Marking

Description. Table 1. Device summary. Order code Temperature range Package Packing Marking Hex buffer/converter (non-inverting) Applications Datasheet - production data Features SO16 Propagation delay time t PD = 50 ns (typ.) at V DD = 10 V, C L = 50 pf High to low level logic conversion Multiplexer:

More information

Description. Order code Temperature range Package Packing Marking

Description. Order code Temperature range Package Packing Marking Dual D-type flip-flop PDIP14 SO14 Applications Automotive Industrial Computer Consumer Datasheet - production data Features Description Set-reset capability Static flip-flop operation - retains state indefinitely

More information

. HIGH SPEED .LOW POWER DISSIPATION .HIGH NOISE IMMUNITY M54/M74HC190 M54/M74HC191 4 BIT SYNCHRONOUS UP/DOWN COUNTERS. fmax = 48 MHz (TYP.

. HIGH SPEED .LOW POWER DISSIPATION .HIGH NOISE IMMUNITY M54/M74HC190 M54/M74HC191 4 BIT SYNCHRONOUS UP/DOWN COUNTERS. fmax = 48 MHz (TYP. M54/M74HC190 M54/M74HC191 4 BIT SYNCHRONOUS UP/DOWN COUNTERS. HIGH SPEED fmax = 48 MHz (TYP.) AT VCC =5V.LOW POWER DISSIPATION I CC =4µA (MAX.) AT T A =25 C.HIGH NOISE IMMUNITY VNIH =VNIL =28%VCC (MIN.)

More information

Description. Table 1. Device summary. Order code Temperature range Package Packing Marking

Description. Table 1. Device summary. Order code Temperature range Package Packing Marking 8-bit shift register with output latches (3-state) Applicatio Datasheet - production data SO16 TSSOP16 Automotive Industrial Computer Coumer Features High speed: f MAX = 59 MHz (typ.) at V CC = 6 V Low

More information

54VCXH Rad hard low voltage CMOS 16-bit d-type flip-flop (3-state) with 3.6 V tolerant inputs and outputs. Features.

54VCXH Rad hard low voltage CMOS 16-bit d-type flip-flop (3-state) with 3.6 V tolerant inputs and outputs. Features. Rad hard low voltage CMOS 16-bit d-type flip-flop (3-state) with 3.6 V tolerant inputs and outputs Features 1.65 to 3.6 V inputs and outputs High speed: t PD = 3.4 ns (Max.) at V CC = 3.0 to 3.6 V t PD

More information

HCC/HCF4032B HCC/HCF4038B

HCC/HCF4032B HCC/HCF4038B HCC/HCF4032B HCC/HCF4038B TRIPLE SERIAL ADDERS INERT INPUTS ON ALL ADDERS FOR SUM COMPLEMENTING APPLICATIONS FULLY STATIC OPERATION...DC TO 10MHz (typ.) @ DD = 10 BUFFERED INPUTS AND OUTPUTS SINGLE-PHASE

More information

Obsolete Product(s) - Obsolete Product(s)

Obsolete Product(s) - Obsolete Product(s) LED DISPLAY DRIVER FEATURES SUMMARY 3 1/2 DIGIT LED DRIVER (23 segments) CURRENT GENERATOR OUTPUTS (no resistors required) CONTINUOUS BRIGHTNESS CONTROL SERIAL DATA INPUT NO LOAD SIGNAL REQUIRED WIDE SUPPLY

More information

HCC/HCF4027B DUAL-J-K MASTER-SLAVE FLIP-FLOP

HCC/HCF4027B DUAL-J-K MASTER-SLAVE FLIP-FLOP DUAL-J-K MASTER-SLAVE FLIP-FLOP. SET-RESET CAPABILITY STATIC FLIP-FLOP OPERATION - RETAINS STATE INDEFINITELY WITH CLOCK LEVEL EITHER HIGH OR LOW MEDIUM SPEED OPERATION - 16MHz (typ. clock toggle rate

More information

Description. Table 1. Device summary. Order code Temperature range Package Packaging Marking

Description. Table 1. Device summary. Order code Temperature range Package Packaging Marking 14-stage ripple carry binary counter/divider and oscillator Applications Automotive Industrial Computer Consumer Description Datasheet - production data Features Medium speed operation Common reset Fully

More information

Features Y Typical propagation delay. Count up to Q 28 ns. Y Typical operating frequency 27 MHz. Y Wide power supply range 2 6V

Features Y Typical propagation delay. Count up to Q 28 ns. Y Typical operating frequency 27 MHz. Y Wide power supply range 2 6V MM54HC192 MM74HC192 Synchronous Decade Up Down Counters MM54HC193 MM74HC193 Synchronous Binary Up Down Counters General Description These high speed synchronous counters utilize advanced silicon-gate CMOS

More information

HCC/HCF4518B HCC/HCF4520B

HCC/HCF4518B HCC/HCF4520B HCC/HCF4518B HCC/HCF4520B DUAL UP-COUNTERS HCC/HCF4518B DUAL BCD UP-COUNTER HCC/HCF4520B DUAL BINARY UP- COUNTER MEDIUM-SPEED OPERATION 6MHz TYP. CLOCK FREQUENCY AT 10V POSITIVE - OR NEGATIVE - EDGE TRIGGER-

More information

74HC193; 74HCT General description. Presettable synchronous 4-bit binary up/down counter. Product data sheet

74HC193; 74HCT General description. Presettable synchronous 4-bit binary up/down counter. Product data sheet Product data sheet 1. General description The 74HC193 and 74HCT193 are high-speed Si-gate CMOS devices and are pin compatible with Low power Schottky TTL (LSTTL). They are specified in compliance with

More information

CD4029BC Presettable Binary/Decade Up/Down Counter

CD4029BC Presettable Binary/Decade Up/Down Counter CD4029BC Presettable Binary/Decade Up/Down Counter General Description The CD4029BC is a presettable up/down counter which counts in either binary or decade mode depending on the voltage level applied

More information

MM74HC14 Hex Inverting Schmitt Trigger

MM74HC14 Hex Inverting Schmitt Trigger MM74HC14 Hex Inverting Schmitt Trigger General Description The MM74HC14 utilizes advanced silicon-gate CMOS technology to achieve the low power dissipation and high noise immunity of standard CMOS, as

More information

HCC4541B HCF4541B PROGRAMMABLE TIMER

HCC4541B HCF4541B PROGRAMMABLE TIMER HCC4541B HCF4541B PROGRAMMABLE TIMER 16 STAGE BINARI COUNTER LOW SYMMETRICAL OUTPUT RESISTANCE, TYPICALLY 100 OHM AT DD = 15 OSCILLATOR FREQUENCY RANGE : DC TO 100kHz AUTO OR MASTER RESET DISABLES OSCIL-

More information

74VHCT574A Octal D-Type Flip-Flop with 3-STATE Outputs

74VHCT574A Octal D-Type Flip-Flop with 3-STATE Outputs 74VHCT574A Octal D-Type Flip-Flop with 3-STATE Outputs General Description The VHCT574A is an advanced high speed CMOS octal flip-flop with 3-STATE output fabricated with silicon gate CMOS technology.

More information

CD4029BC Presettable Binary/Decade Up/Down Counter

CD4029BC Presettable Binary/Decade Up/Down Counter Presettable Binary/Decade Up/Down Counter General Description The CD4029BC is a presettable up/down counter which counts in either binary or decade mode depending on the voltage level applied at binary/decade

More information

MM54HCT193 MM74HCT193 Synchronous Binary Up Down Counters

MM54HCT193 MM74HCT193 Synchronous Binary Up Down Counters MM54HCT193 MM74HCT193 Synchronous Binary Up Down Counters General Description These high speed synchronous counters utilize advanced silicon-gate CMOS technology to achieve the high noise immunity and

More information

. MEDIUM SPEED OPERATION - 8MHz (typ.) @ . MULTI-PACKAGE PARALLEL CLOCKING FOR HCC4029B HCF4029B PRESETTABLE UP/DOWN COUNTER BINARY OR BCD DECADE

. MEDIUM SPEED OPERATION - 8MHz (typ.) @ . MULTI-PACKAGE PARALLEL CLOCKING FOR HCC4029B HCF4029B PRESETTABLE UP/DOWN COUNTER BINARY OR BCD DECADE HCC4029B HCF4029B PRESETTABLE UP/DOWN COUNTER BINARY OR BCD DECADE. MEDIUM SPEED OPERATION - 8MHz (typ.) @ CL = 50pF AND DD-SS = 10. MULTI-PACKAGE PARALLEL CLOCKING FOR SYNCHRONOUS HIGH SPEED OUTPUT RES-

More information

INTEGRATED CIRCUITS. For a complete data sheet, please also download:

INTEGRATED CIRCUITS. For a complete data sheet, please also download: INTEGRATED CIRCUITS DATA SHEET For a complete data sheet, please also download: The IC6 74HC/HCT/HCU/HCMOS Logic Family Specifications The IC6 74HC/HCT/HCU/HCMOS Logic Package Information The IC6 74HC/HCT/HCU/HCMOS

More information

PB137 POSITIVE VOLTAGE REGULATOR FOR BATTERY CHARGER

PB137 POSITIVE VOLTAGE REGULATOR FOR BATTERY CHARGER POSITIVE VOLTAGE REGULATOR FOR BATTERY CHARGER REVERSE LEAKAGE CURRENT LESS THAN 10 µa THREE TERMINAL FIXED VERSION (13.7V) OUTPUT CURRENT IN EXCESS OF 1.5A AVAILABLE IN ± 1% (AC) SELECTION AT 25 C TYPICAL

More information

CD4027BC Dual J-K Master/Slave Flip-Flop with Set and Reset

CD4027BC Dual J-K Master/Slave Flip-Flop with Set and Reset October 1987 Revised March 2002 CD4027BC Dual J-K Master/Slave Flip-Flop with Set and Reset General Description The CD4027BC dual J-K flip-flops are monolithic complementary MOS (CMOS) integrated circuits

More information

Is Now Part of To learn more about ON Semiconductor, please visit our website at

Is Now Part of To learn more about ON Semiconductor, please visit our website at Is Now Part of To learn more about ON Semiconductor, please visit our website at www.onsemi.com ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC

More information

Obsolete Product(s) - Obsolete Product(s)

Obsolete Product(s) - Obsolete Product(s) M5450 M5451 LED DISPLAY DRIVERS FEATURES SUMMARY M5450 34 OUTPUTS/15mA SINK M5451 35 OUTPUTS/15mA SINK CURRENT GENERATOR OUTPUTS (NO EXTERNAL RESISTORS REQUIRED) CONTINUOUS BRIGHTNESS CONTROL SERIAL DATA

More information

Order codes Package Packaging. STPIC6C595MTR SO-16 (Tape and reel) 2500 parts per reel STPIC6C595TTR TSSOP16 (Tape and reel) 2500 parts per reel

Order codes Package Packaging. STPIC6C595MTR SO-16 (Tape and reel) 2500 parts per reel STPIC6C595TTR TSSOP16 (Tape and reel) 2500 parts per reel Power logic 8-bit shift register Features Low R DS(on) : 4 Ω typ 30 mj avalanche energy Eight 100 ma DMOS outputs 250 ma current limit capability 33 V output clamp voltage Device are cascadable Low power

More information

CD4013BC Dual D-Type Flip-Flop

CD4013BC Dual D-Type Flip-Flop CD4013BC Dual D-Type Flip-Flop General Description The CD4013B dual D-type flip-flop is a monolithic complementary MOS (CMOS) integrated circuit constructed with N- and P-channel enhancement mode transistors.

More information

CD40193BC Synchronous 4-Bit Up/Down Binary Counter

CD40193BC Synchronous 4-Bit Up/Down Binary Counter Synchronous 4-Bit Up/Down Binary Counter General Description The CD40193BC up/down counter is monolithic complementary MOS (CMOS) integrated circuits. The CD40193BC is a binary counter. Counting up and

More information

. BCD-TO-DECIMAL DECODING OR BINARY- . HIGH DECODED OUTPUTDRIVE CAPABILITY . POSITIVE LOGIC INPUTS AND OUTPUTS : HCC/HCF4028B BCD-TO-DECIMAL DECODER

. BCD-TO-DECIMAL DECODING OR BINARY- . HIGH DECODED OUTPUTDRIVE CAPABILITY . POSITIVE LOGIC INPUTS AND OUTPUTS : HCC/HCF4028B BCD-TO-DECIMAL DECODER HCC/HCF428B BCD-TO-DECIMAL DECODER. BCD-TO-DECIMAL DECODING OR BINARY- TO-OCTAL DECODING. HIGH DECODED OUTPUTDRIVE CAPABILITY. POSITIVE LOGIC INPUTS AND OUTPUTS : DECODED OUTPUTS GO HIGH ON SELEC- TION

More information

MM74HC4538 Dual Retriggerable Monostable Multivibrator

MM74HC4538 Dual Retriggerable Monostable Multivibrator MM74HC4538 Dual Retriggerable Monostable Multivibrator General Description The MM74HC4538 high speed monostable multivibrator (one shots) is implemented in advanced silicon-gate CMOS technology. They feature

More information

74AC74 74ACT74 Dual D-Type Positive Edge-Triggered Flip-Flop

74AC74 74ACT74 Dual D-Type Positive Edge-Triggered Flip-Flop Dual D-Type Positive Edge-Triggered Flip-Flop General Description The AC/ACT74 is a dual D-type flip-flop with Asynchronous Clear and Set inputs and complementary (Q, Q) outputs. Information at the input

More information

ULN2001A-ULN2002A ULN2003A-ULN2004A

ULN2001A-ULN2002A ULN2003A-ULN2004A ULN2001A-ULN2002A ULN200A-ULN2004A SEVEN DARLINGTON ARRAYS SEVEN DARLINGTONS PER PACKAGE OUTPUT CURRENT ma PER DRIVER (600mA PEAK) OUTPUT VOLTAGE 50V INTEGRATED SUPPRESSION DIODES FOR INDUCTIVE LOADS OUTPUTS

More information

INTEGRATED CIRCUITS. 74LVC08A Quad 2-input AND gate. Product specification IC24 Data Handbook. 1997 Jun 30

INTEGRATED CIRCUITS. 74LVC08A Quad 2-input AND gate. Product specification IC24 Data Handbook. 1997 Jun 30 INTEGRATED CIRCUITS IC24 Data Handbook 1997 Jun 30 FEATURES Wide supply voltage range of 1.2 V to 3.6 V In accordance with JEDEC standard no. 8-1A Inputs accept voltages up to 5.5 V CMOS low power consumption

More information

L293B L293E PUSH-PULL FOUR CHANNEL DRIVERS

L293B L293E PUSH-PULL FOUR CHANNEL DRIVERS L293B L293E PUSH-PULL FOUR CHANNEL DRIVERS OUTPUT CURRENT 1A PER CHANNEL PEAK OUTPUT CURRENT 2A PER CHANNEL (non repetitive) INHIBIT FACILITY HIGH NOISE IMMUNITY SEPARATE LOGIC SUPPLY OVERTEMPERATURE PROTECTION

More information

CD40174BC CD40175BC Hex D-Type Flip-Flop Quad D-Type Flip-Flop

CD40174BC CD40175BC Hex D-Type Flip-Flop Quad D-Type Flip-Flop Hex D-Type Flip-Flop Quad D-Type Flip-Flop General Description The CD40174BC consists of six positive-edge triggered D- type flip-flops; the true outputs from each flip-flop are externally available. The

More information

CD40192BC CD40193BC Synchronous 4-Bit Up/Down Decade Counter Synchronous 4-Bit Up/Down Binary Counter

CD40192BC CD40193BC Synchronous 4-Bit Up/Down Decade Counter Synchronous 4-Bit Up/Down Binary Counter Synchronous 4-Bit Up/Down Decade Counter Synchronous 4-Bit Up/Down Binary Counter General Description The CD40192BC and CD40193BC up/down counters are monolithic complementary MOS (CMOS) integrated circuits.

More information

STV7699 PLASMA DISPLAY PANEL DATA DRIVER STV7699 PQFP100. (Top View)

STV7699 PLASMA DISPLAY PANEL DATA DRIVER STV7699 PQFP100. (Top View) PLASMA DISPLAY PANEL DATA DRIVER FEATURES 64 Outputs Plasma Display Driver 30V Absolute Maximum Supply 5V Supply for Logic 50/40mA Source / Sink Output 60/60mA Source / Sink Output Diode 64-BIT Shift Register

More information

CD4001BC/CD4011BC Quad 2-Input NOR Buffered B Series Gate Quad 2-Input NAND Buffered B Series Gate

CD4001BC/CD4011BC Quad 2-Input NOR Buffered B Series Gate Quad 2-Input NAND Buffered B Series Gate CD4001BC/CD4011BC Quad 2-Input NOR Buffered B Series Gate Quad 2-Input NAND Buffered B Series Gate General Description The CD4001BC and CD4011BC quad gates are monolithic complementary MOS (CMOS) integrated

More information

74VHC574 Octal D-Type Flip-Flop with 3-STATE Outputs

74VHC574 Octal D-Type Flip-Flop with 3-STATE Outputs 74HC574 Octal D-Type Flip-Flop with 3-STATE Outputs General Description Ordering Code: March 1993 Revised May 2005 The HC574 is an advanced high speed CMOS octal flipflop with 3-STATE output fabricated

More information

Application Examples: MICROPROCESSOR DISPLAYS INDUSTRIAL CONTROL INDICATOR RELAY DRIVER INSTRUMENTATION READOUTS PLCC44 (Plastic Chip Carrier)

Application Examples: MICROPROCESSOR DISPLAYS INDUSTRIAL CONTROL INDICATOR RELAY DRIVER INSTRUMENTATION READOUTS PLCC44 (Plastic Chip Carrier) M5450 M5451 LED DISPLAY DRIVERS FEATURES SUMMARY M5450 34 OUTPUTS/15mA SINK M5451 35 OUTPUTS/15mA SINK CURRENT GENERATOR OUTPUTS (NO EXTERNAL RESISTORS REQUIRED) CONTINUOUS BRIGHTNESS CONTROL SERIAL DATA

More information

CD4029BM CD4029BC Presettable Binary Decade Up Down Counter

CD4029BM CD4029BC Presettable Binary Decade Up Down Counter CD4029BM CD4029BC Presettable Binary Decade Up Down Counter General Description The CD4029BM CD4029BC is a presettable up down counter which counts in either binary or decade mode depending on the voltage

More information

LF00AB/C SERIES VERY LOW DROP VOLTAGE REGULATORS WITH INHIBIT

LF00AB/C SERIES VERY LOW DROP VOLTAGE REGULATORS WITH INHIBIT LF00AB/C SERIES ERY LOW DROP OLTAGE REGULATORS WITH INHIBIT ERY LOW DROPOUT OLTAGE (5) ERY LOW QUIESCENT CURRENT (TYP. 50 µa IN OFF MODE, 500µA INON MODE) OUTPUT CURRENT UP TO 500 ma LOGIC-CONTROLLED ELECTRONIC

More information

Octal 3-State Noninverting D Flip-Flop High-Speed Silicon-Gate CMOS

Octal 3-State Noninverting D Flip-Flop High-Speed Silicon-Gate CMOS TECHNICAL DATA IN74AC374 Octal 3-State Noninverting D Flip-Flop High-Speed Silicon-Gate CMOS The IN74AC374 is identical in pinout to the LS/ALS374, HC/HCT374. The device inputs are compatible with standard

More information

MM74HC4046 CMOS Phase Lock Loop

MM74HC4046 CMOS Phase Lock Loop CMOS Phase Lock Loop General Description The MM74HC4046 is a low power phase lock loop utilizing advanced silicon-gate CMOS technology to obtain high frequency operation both in the phase comparator and

More information

ST202 5V POWERED MULTI-CHANNEL RS-232 DRIVERS AND RECEIVERS

ST202 5V POWERED MULTI-CHANNEL RS-232 DRIVERS AND RECEIVERS 5V POWERED MULTI-CHANNEL RS-232 DRIVERS AND RECEIVERS SUPPLY VOLTAGE RANGE: 4.5 TO 5.5V SUPPLY CURRENT NO LOAD (TYP): 1.5mA TRASMITTER OUTPUT VOLTAGE SWING (TYP): ± 9V TRANSITION SLEW RATE (TYP.): 12V/µs

More information

INTEGRATED CIRCUITS. For a complete data sheet, please also download:

INTEGRATED CIRCUITS. For a complete data sheet, please also download: INTEGRATED CIRCUITS DATA SHEET For a complete data sheet, please also download: The IC6 74HC/HCT/HCU/HCMOS Logic Family Specifications The IC6 74HC/HCT/HCU/HCMOS Logic Package Information The IC6 74HC/HCT/HCU/HCMOS

More information

INTEGRATED CIRCUITS. 74ALS174 Hex D flip flop. Product specification 1991 Feb 08 IC05 Data Handbook

INTEGRATED CIRCUITS. 74ALS174 Hex D flip flop. Product specification 1991 Feb 08 IC05 Data Handbook INTEGRATE CIRCUITS Hex flip flop 1991 Feb 08 IC05 ata Handbook Hex flip-flop FEATURES Four edge-triggered flip-flops Buffered common clock Buffered asynchronous master reset PIN CONFIGURATION MR 1 0 2

More information

CD4027BM CD4027BC Dual J-K Master Slave Flip-Flop with Set and Reset

CD4027BM CD4027BC Dual J-K Master Slave Flip-Flop with Set and Reset CD4027BM CD4027BC Dual J-K Master Slave Flip-Flop with Set and Reset General Description These dual J-K flip-flops are monolithic complementary MOS (CMOS) integrated circuits constructed with N- and P-

More information

DUAL UP-COUNTER High-Voltage Silicon-Gate CMOS

DUAL UP-COUNTER High-Voltage Silicon-Gate CMOS IW4B DUAL UP-COUNTER High- Silicon-Gate CMOS The IW4B Dual Binary Up-Counter coists two identical, internally synchronous 4-stage counters. The counter stages are D-type flip-flops having interchangeable

More information

54ACTQ273 Quiet Series Octal D Flip-Flop

54ACTQ273 Quiet Series Octal D Flip-Flop 273 Quiet Series Octal D Flip-Flop General Description The ACTQ273 has eight edge-triggered D-type flip-flops with individual D inputs and Q outputs. The common buffered Clock (CP) and Master Reset (MR)

More information

8-Bit Serial-Input/Parallel-Output Shift register

8-Bit Serial-Input/Parallel-Output Shift register TECHNICAL DATA IN74AC164 8-Bit Serial-Input/Parallel-Output Shift register High-Speed Silicon-Gate CMOS The IN74AC164 is identical in pinout to the LS/ALS164, HC/HCT164. The device inputs are compatible

More information

NC7SV74 TinyLogic ULP-A D-Type Flip-Flop with Preset and Clear

NC7SV74 TinyLogic ULP-A D-Type Flip-Flop with Preset and Clear NC7SV74 TinyLogic ULP-A D-Type Flip-Flop with Preset and Clear Features Space-saving US8 surface-mount package MicroPak Pb-free leadless package 0.9V to 3.6V V CC supply operation 3.6V over-voltage tolerant

More information

74HC175; 74HCT175. Quad D-type flip-flop with reset; positive-edge trigger

74HC175; 74HCT175. Quad D-type flip-flop with reset; positive-edge trigger Rev. 5 29 January 2016 Product data sheet 1. General description 2. Features and benefits 3. Ordering information The is a quad positive-edge triggered D-type flip-flop with individual data inputs (Dn)

More information

. 2 DIGIT LED DRIVER (15 segments) CURRENT GENERATOR OUTPUTS (no resistor

. 2 DIGIT LED DRIVER (15 segments) CURRENT GENERATOR OUTPUTS (no resistor LED DISPLAY DRIVER. 2 DIGIT LED DRIVER (15 segments) CURRENT GENERATOR OUTPUTS (no resistor required) CONTINUOUS BRIGHTNESS CONTROL. SERIAL DATA INPUT WIDE SUPPLY VOLTAGE OPERATION TTL COMPATIBILITY Application

More information

Description. Table 1. Device summary. Order codes Temperature range Package Packaging

Description. Table 1. Device summary. Order codes Temperature range Package Packaging Features DIP-8 ESD protection ±15 kv human body model ±8 kv IEC 1000-4-2 contact discharge Operates from a single 3.3 V supply - no charge pump required Interoperable with 5 V logic 1 µa low current shutdown

More information

4-bit binary full adder with fast carry CIN + (A1 + B1) + 2(A2 + B2) + 4(A3 + B3) + 8(A4 + B4) = = S1 + 2S2 + 4S3 + 8S4 + 16COUT

4-bit binary full adder with fast carry CIN + (A1 + B1) + 2(A2 + B2) + 4(A3 + B3) + 8(A4 + B4) = = S1 + 2S2 + 4S3 + 8S4 + 16COUT Rev. 03 11 November 2004 Product data sheet 1. General description 2. Features The is a high-speed Si-gate CMOS device and is pin compatible with low power Schottky TTL (LSTTL). The is specified in compliance

More information

74HC107; 74HCT107. Dual JK flip-flop with reset; negative-edge trigger

74HC107; 74HCT107. Dual JK flip-flop with reset; negative-edge trigger Rev. 5 30 November 2015 Product data sheet 1. General description 2. Features and benefits 3. Ordering information The is a dual negative edge triggered JK flip-flop featuring individual J and K inputs,

More information

74HC377; 74HCT377. 1. General description. 2. Features and benefits. 3. Ordering information

74HC377; 74HCT377. 1. General description. 2. Features and benefits. 3. Ordering information Rev. 4 24 February 2016 Product data sheet 1. General description 2. Features and benefits 3. Ordering information The is an octal positive-edge triggered D-type flip-flop. The device features clock (CP)

More information

74F174 Hex D-Type Flip-Flop with Master Reset

74F174 Hex D-Type Flip-Flop with Master Reset Hex D-Type Flip-Flop with Master Reset General Description The 74F174 is a high-speed hex D-type flip-flop. The device is used primarily as a 6-bit edge-triggered storage register. The information on the

More information

Order code Temperature range Package Packaging

Order code Temperature range Package Packaging ST485B ST485C Low power RS-485/RS-422 transceiver Features Low quiescent current: 300 µa Designed for RS-485 interface application - 7 V to 12 V common mode input voltage range Driver maintains high impedance

More information

74AC14 74ACT14 Hex Inverter with Schmitt Trigger Input

74AC14 74ACT14 Hex Inverter with Schmitt Trigger Input 74AC14 74ACT14 Hex Inverter with Schmitt Trigger Input General Description The 74AC14 and 74ACT14 contain six inverter gates each with a Schmitt trigger input. They are capable of transforming slowly changing

More information

74HC4040; 74HCT4040. 12-stage binary ripple counter

74HC4040; 74HCT4040. 12-stage binary ripple counter Rev. 5 3 February 2016 Product data sheet 1. General description 2. Features and benefits 3. Applications 4. Ordering information The is a with a clock input (CP), an overriding asynchronous master reset

More information

.OPERATING SUPPLY VOLTAGE UP TO 46 V

.OPERATING SUPPLY VOLTAGE UP TO 46 V L298 DUAL FULL-BRIDGE DRIVER.OPERATING SUPPLY VOLTAGE UP TO 46 V TOTAL DC CURRENT UP TO 4 A. LOW SATURATION VOLTAGE OVERTEMPERATURE PROTECTION LOGICAL "0" INPUT VOLTAGE UP TO 1.5 V (HIGH NOISE IMMUNITY)

More information

Presettable 4-Bit Binary UP/DOWN Counter High-Speed Silicon-Gate CMOS

Presettable 4-Bit Binary UP/DOWN Counter High-Speed Silicon-Gate CMOS TECHNICAL DATA Presettable 4-Bit Binary UP/DOWN Counter High-Speed Silicon-Gate CMOS IN74AC193 The IN74AC193 is identical in pinout to the LS/ALS193, HC/HCT193. The device inputs are compatible with standard

More information

74HC74; 74HCT74. 1. General description. 2. Features and benefits. 3. Ordering information

74HC74; 74HCT74. 1. General description. 2. Features and benefits. 3. Ordering information Rev. 5 3 December 2015 Product data sheet 1. General description 2. Features and benefits 3. Ordering information The 74HC74 and 74HCT74 are dual positive edge triggered D-type flip-flop. They have individual

More information

Obsolete Product(s) - Obsolete Product(s)

Obsolete Product(s) - Obsolete Product(s) 2N2219A 2N2222A DESCRIPTION The 2N2219A and 2N2222A are silicon Planar Epitaxial NPN transistors in Jedec TO-39 (for 2N2219A) and in Jedec TO-18 (for 2N2222A) metal case. They are designed for high speed

More information

74HC4002; 74HCT General description. 2. Features and benefits. 3. Ordering information. Dual 4-input NOR gate

74HC4002; 74HCT General description. 2. Features and benefits. 3. Ordering information. Dual 4-input NOR gate Rev. 5 26 May 2016 Product data sheet 1. General description 2. Features and benefits 3. Ordering information The is a dual 4-input NOR gate. Inputs also include clamp diodes that enable the use of current

More information

Symbol Parameter Value Unit V DS Drain-source Voltage (V GS = 0) 50 V V DGR Drain- gate Voltage (R GS = 20 kω) 50 V

Symbol Parameter Value Unit V DS Drain-source Voltage (V GS = 0) 50 V V DGR Drain- gate Voltage (R GS = 20 kω) 50 V BUZ11 N - CHANNEL 50V - 0.03Ω - 33A TO-220 STripFET MOSFET TYPE V DSS R DS(on) I D BUZ11 50 V < 0.04 Ω 33 A TYPICAL RDS(on) = 0.03 Ω AVALANCHE RUGGED TECHNOLOGY 100% AVALANCHE TESTED HIGH CURRENT CAPABILITY

More information

74AC191 Up/Down Counter with Preset and Ripple Clock

74AC191 Up/Down Counter with Preset and Ripple Clock 74AC191 Up/Down Counter with Preset and Ripple Clock General Description The AC191 is a reversible modulo 16 binary counter. It features synchronous counting and asynchronous presetting. The preset feature

More information

ULN2801A, ULN2802A, ULN2803A, ULN2804A

ULN2801A, ULN2802A, ULN2803A, ULN2804A ULN2801A, ULN2802A, ULN2803A, ULN2804A Eight Darlington array Datasheet production data Features Eight Darlington transistors with common emitters Output current to 500 ma Output voltage to 50 V Integral

More information