ELECTRICAL FASTENERS FOR INDUSTRIAL AND ENGINEERED APPLICATIONS
|
|
- Miles Webster
- 7 years ago
- Views:
Transcription
1 ELETRIAL FASTENERS FOR INDUSTRIAL AND ENGINEERED APPLIATIONS
2 INDUSTRIAL APPLIATIONS For more than 30 years, ADDY has lead the electrical industry as the #1 manufacturer of innovative fasteners... Our value-added, spring steel fasteners have earned a reputation for innovation and quality. ERIO is building on this reputation by bringing ADDY Fasteners innovation to our new offering of supports and fasteners for the installation of heavier electrical systems. We manufactured a new family of fasteners specifically for heavy duty industrial construction. For example, our 6000 lamping System was made to specifically attach or suspend services such as 6000 lamping System cable tray, large equipment or pipe works, with maximum security onto steel beams. ERIO stands behind the quality and reliability of our fasteners that are shipped from our ISO 9001 ertified facility. In the ADDY tradition, our goal is to make heavyweight industrial fasteners just as quick and easy to install as all our current fasteners. Look to ERIO s ADDY Fastener line for continual product innovation and improvements designed to provide reliable, cost-effective solutions for your fastening requirements.
3 FREE FASTENER SAMPLES See reply card inside for details.
4 TABLE OF ONTENTS APPLIATIONS FASTENERS FOR STEEL BEAMS lamping System B14 Beam lamp B13 Beam lamp Beam lamp PAR / ET / RA lamps Beam lamp Beam lamp Beam lamp Beam lamp B10 Beam lamp B26 Beam lamp B200 & B400 Beam lamps B Beam lamp H Series Hammer On Flange lips Hammer On Flange lips Strap Hanger lips Beam Retainer Assemblies Beam Retainer Accessories FASTENERS FOR PURLINS Purlin lamp Beam lamp Beam lamp B10 Beam lamp B26 Beam lamp VF & AF Purlin lips DEKING HANGERS TDH lamp ONDUIT SUPPORTS PAR / ET / RA lamps onduit Hanger / 100 Swivel Loop Hanger D Series onduit lip M Series onduit lip S able lip STRUT FASTENERS SH Strut lamps SK Strut lamp MFA Strut lips lamping System Beam lamps for Strut B23 Beam Spreader IN8T5 Beam Spreader AESSORIES Strut Nuts TEHNIAL Reference ADDY Fasteners INDEX Alpha-numeric index For a complete list of UL Listed Fasteners, refer to the index or contact the factory. 3
5 ADDY Fasteners, a standard in the electrical industry Structural fastening systems require a high degree of reliability, and any compromise on quality cannot be accepted. Every detail of a ADDY Fastener, from its initial conception through design, manufacture and corrosion protection qualities, is aimed towards increasing safety and reliability. On-Site application examples Refers to product page. 4 5
6 SYMBOLS Throughout the pages of this catalog you will observe various signs and symbols relating to various aspects of the installation. A summary of which follows: BASE MATERIAL The following icons represent the various main and substructures for which ADDY Industrial Fasteners are designed. Beam Flange Purlin Decking Strut Threaded Rod Walls Hammer VAFT Punch Wrench Nut Driver Slotted Robertson Phillips Hand Only = Recommended Load (see page 73 for details) = Box Quantity ORROSION PROTETION (see page 72 for details) EG = Electrogalvanized EPZ = Mechanical Galvanized Zinc ZP = Zinc Phosphate PG = Pre-Galvanized Zinc SS = Stainless Steel HDG = Hot Dipped Galvanized Zinc 6
7 APPLIATIONS APPLIATIONS 7
8 APPLIATIONS STEEL BEAMS Page 20 Page 21 Page lamping System B14 Beam lamp B13 Beam lamp Flange Size (up to) 1-3/8 (35 mm) 1-5/8 (41 mm) 7/8 (22 mm) Load Rating (up to) 2000 Lbs. (9.3 kn) 1900 Lbs. (8.4 kn) 1600 Lbs. (7.1 kn) ABLE TRAY, TRUNKING ONDUITS, TUBES JUNTION BOXES, ELETRIAL EQUIPMENT LIGHT FITTINGS 8
9 (continued on page 10) APPLIATIONS Page 23 Page 24 Page 25 Page Beam lamp PAR / ET / RA lamps 300 Beam lamp 310 Beam lamp 5/8 (16 mm) 3/4 (20 mm) 3/4 (20 mm) 1-1/4 (32 mm) 1000 Lbs. (4.5 kn) 950 Lbs. (4.2 kn) 950 Lbs. (4.2 kn) 9
10 APPLIATIONS STEEL BEAMS (continued from page 9) Page 27 Page 28 Page Beam lamp 200 Beam lamp B10 Beam lamp Flange Size (up to) 3/4 (20 mm) 3/4 (20 mm) 3/4 (20 mm) Load Rating (up to) 440 Lbs. (2 kn) 760 Lbs. (3.4 kn) 300 Lbs. (1.3 kn) ABLE TRAY, TRUNKING ONDUITS, TUBES JUNTION BOXES, ELETRIAL EQUIPMENT LIGHT FITTINGS 10
11 (continued on page 12) APPLIATIONS Page 30 Page 31 Page 32 Page 33 B26 Beam lamp B200 & B400 B Beam lamps H Series Hammer On 3/4 (20 mm) 3/4 (20 mm) 3/8 (16 mm) 3/4 (20 mm) 250 Lbs. (1.1 kn) 200 Lbs. (0.9 kn) 100 Lbs. (0.5 kn) 200 Lbs. (0.9 kn) 11
12 APPLIATIONS STEEL BEAMS (continued from page 11) Page 34 Page 35 Page 36 H Series Hammer On Hammer On Flange Strap Hanger lips Flange Size (up to) 3/4 (20 mm) 3/4 (20 mm) 3/4 (20 mm) Load Rating (up to) 200 Lbs. (0.9 kn) 100 Lbs. (0.5 kn) 200 Lbs. (0.9 kn) ABLE TRAY, TRUNKING ONDUITS, TUBES JUNTION BOXES, ELETRIAL EQUIPMENT LIGHT FITTINGS 12
13 PURLINS (continued on page 14) APPLIATIONS Page 37 Beam Retainer Assem. 3/4 (20 mm) 200 Lbs. (0.9 kn) Page 42 Page 43 Page Purlin lamp 300 Beam lamp 310 Beam lamp 1 (25 mm) 3/4 (20 mm) 1-1/4 (32 mm) 400 Lbs. (1.8 kn) 950 Lbs. (4.2 kn) 950 Lbs. (4.2 kn) 13
14 APPLIATIONS PURLINS (continued from page 13) Page 45 Page 46 Page 47 B10 Beam lamp B26 Beam lamp VF & AF Purlin lips Flange Size (up to) 3/4 (20 mm) 3/4 (20 mm) 1/4 (8 mm) Load Rating (up to) 300 Lbs. (1.3 kn) 250 Lbs. (1.1 kn) 160 Lbs. (0.71 mm) ABLE TRAY, TRUNKING ONDUITS, TUBES JUNTION BOXES, ELETRIAL EQUIPMENT LIGHT FITTINGS 14
15 DEKING ONDUIT SUPPORTS (continued on page 16) APPLIATIONS Page 50 TDH 200 Lbs. (0.9 kn) Page 52 Page 53 Page 54 PAR / ET / RA lamps / 100 3/4 (20 mm) 800 Lbs. (3.6 kn) 650 Lbs. (2.9 kn) 15
16 APPLIATIONS ONDUIT SUPPORTS (continued from page 15) Flange Size (up to) Load Rating (up to) Page 55 Page 56 Page 57 D Series M Series S able lips 1/2 (14 mm) 350 Lbs. (1.6 kn) 100 Lbs. (0.5 kn) ABLE TRAY, TRUNKING ONDUITS, TUBES JUNTION BOXES, ELETRIAL EQUIPMENT LIGHT FITTINGS 16
17 STRUT (continued on page 18) APPLIATIONS Page 60 Page 61 Page 62 Page 63 SH Strut lamp SK Strut lamp MFA Strut lip 6000 lamping System 1-3/8 (35 mm) 350 Lbs. (1.6 kn) 350 Lbs. (1.6 kn) 45 Lbs. (0.2 kn) 2000 Lbs. (9.3 kn) 17
18 APPLIATIONS STRUT (continued from page 17) B16 B23 STRUT NUTS Page 64 B17 Page 65 IN8T5 Page 64 B18 Page 66 Page 64 B20 MFA625 Page 62, 68 Page 64 B21 MFA4I Page 64 Page 62, 68 Page 68 18
19 Fasteners for STEEL BEAMS STEEL BEAM Heavy Duty Standard Duty Flange Size Hot Dipped Optional Page No. Part Number IN mm Rod Size Zinc Plated Galvanized Stainless Steel Retainer <1-3/8 <35 Included 21 B14 <1-5/8 <41 3/8-5/8 EG SO 22 B13 <7/8 <22 1/4-5/8 EG SO <5/8 <16 3/8-5/8 EG SO SO Included 24 PAR / ET / RA <3/4 <20 SO <3/4 <20 3/8-3/4 EG SO <1-1/4 <32 3/8-1/2 EG <3/4 <20 3/8-5/8 EG SO <3/4 <20 3/8-1/2 EG SO SO 29 B10 <3/4 <20 <1/2 EG SO 30 B26 <3/4 <20 1/4 EG 31 B200 <5/8 <16 1/4 EG 31 B400 <3/4 <20 3/8 EG 32 B <3/4 <20 3/16-3/8 ZP H Series <3/4 <20 1/4-3/8 ZP 35 Hammer On <3/4 <20 1/4 ZP 36 Strap Hanger <3/4 <20 ZP 37 Beam Retainer Assemblies <3/4 <20 1/4-3/8 EG Beam Retainer Accessories PG SO Available from stock SO = Special Order 19
20 6000 LAMPING SYSTEM For attaching or suspending heavy services such as cable tray, ventilation ductwork, trunking, pipes, etc. with maximum reliability onto steel beams. 3/8 (10 mm) 1-3/8 Max (35 mm) STEEL BEAM 1-5/8 (41 mm) L 1-5/8 (41 mm) SINGLE PROFILE 1-5/8 x 1-5/8 12 Gauge Slotted Hot Dipped Galvanized comes with two clamp set assemblies A L A Max Part Number IN mm IN mm oating 6A12SL20HD /2 370 HDG 1 6A12SL28HD /2 570 HDG 1 6A12SL36HD /2 775 HDG 1 NOTE: Assembled to fit min. 4-1/2 (115 mm) and max. 10-1/4 (260 mm) 3/8 (10 mm) 1-3/8 Max (35 mm) 1-5/8 (41 mm) omes assembled in single profile 1-5/8 x 1-5/8 (41 x 41 mm) or double profile back to back 1-5/8 x 1-5/8 (41 x 41 mm) 12 gauge. For beam flanges up to 1-3/8 (35 mm) thick. Hot dipped galvanized or stainless steel (AISI 304). lamp sets available separately. 1-5/8 (41 mm) 1-5/8 (41 mm) L DOUBLE PROFILE 1-5/8 x 1-5/8 12 Gauge Back to Back Hot Dipped Galvanized comes with two clamp set assemblies L A Max Part Number IN mm IN mm oating 6A12A12HD /2 165 HDG 1 6A12A16HD /2 265 HDG 1 6A12A20HD /2 370 HDG 1 6A12A24HD /2 470 HDG 1 6A12A32HD /2 675 HDG 1 A LAMP 6000 (component) Part Number oating 6120T6HD HDG T6SS SS 20 NOTE: Packed 10 pair per box. 1-3/8 (35 mm) LOAD RATING With a 4:1 safety factor F1 is load rating at center of beam F2 is load rating as stated (B) from the edge of beam A F1 B F2 IN mm Lbs. kn IN mm Lbs. kn Single Double F1 A B F2 A = Flange Width = Flange Size = Diameter H = Fastener Height M = Bolt Size P = Fastener Width PS = Pipe Size Rigid/EMT RS = Rod Size 20
21 B14 BEAM LAMP For suspending heavy loads and services with threaded rod from steel structural sections. M RS 2-1/2 (63.5 mm) 1 (24 mm) STEEL BEAM 2-1/2 (63.5 mm) Max* Part Number RS M IN mm oating Lbs. kn B140037EG 3/8-16 3/ /8 16 EG B140050EG 1/2-13 1/ /8 16 EG B140062EG 5/8-11 1/ /8 16 EG *Minimum flange thickness 5/8 (16 mm). 14 GAGE Heavy duty steel beam clamp to fit flanges from 5/8 (16 mm) to 1-5/8 (41 mm) thick. Threaded to allow quick and easy attachment of threaded rod or bolted components. Electrogalvanized finish for good corrosion protection. Available in hot dipped galvanized finish (special order). Retaining strap available separately, for more secure attachment or seismic applications. Hardened cup point setscrew to provide secure grip on tapered sections. 1-1/4 (32 mm) Retainer Straps L A L A Max Part Number IN mm IN mm oating B090009EG PG 50 B090012EG PG 50 B090015EG PG 25 A = Flange Width = Flange Size = Diameter H = Fastener Height M = Bolt Size P = Fastener Width PS = Pipe Size Rigid/EMT RS = Rod Size 21
22 B13 BEAM LAMP For suspending heavy loads and services with threaded rod from steel structural sections. M 1 (24 mm) STEEL BEAM RS 2-1/2 (63.5 mm) 2-1/2 (63.5 mm) Max Part Number RS M IN mm oating Lbs. kn B130025EG 1/4-20 3/8-16 7/8 22 EG B130037EG 3/8-16 3/8-16 7/8 22 EG B130050EG 1/2-13 1/2-13 7/8 22 EG B130062EG 5/8-11 1/2-13 7/8 22 EG Heavy duty steel beam clamp to fit up to 7/8 (22 mm) thick flanges. Threaded to allow quick and easy attachment of threaded rod or bolted components. Electrogalvanized finish for good corrosion protection. Available in hot dipped galvanized finish (special order). Retaining strap available separately, for more secure attachment or seismic applications. Hardened cup point setscrew to provide secure grip on tapered sections. 14 GAGE 1-1/4 (32 mm) L Retainer Straps L A Max Part Number IN mm IN mm oating B090009EG PG 50 B090012EG PG 50 B090015EG PG 25 A A = Flange Width = Flange Size = Diameter H = Fastener Height M = Bolt Size P = Fastener Width PS = Pipe Size Rigid/EMT RS = Rod Size 22
23 363 BEAM LAMP For suspending heavy loads and services with threaded rod from under wide flange steel beams. STEEL BEAM A aptures far side of flange for increased safety in industrial and seismic applications. Steel beam clamp to fit up to 5/8 (16 mm) thick and 8 (200 mm) wide flanges. an be attached to beam before installation of threaded rod or components. Accommodates threaded rod from 3/8 to 5/8. Electrogalvanized finish for good corrosion protection. Available in hot dipped galvanized finish or made from stainless steel (special order). M Max H A Part Number RS M IN mm IN mm IN mm oating Lbs. kn EG 3/8 3/8-16 5/ / / EG EG 1/2 1/2-13 5/ / / EG EG 5/8 5/8-11 5/ / / EG RS H A = Flange Width = Flange Size = Diameter H = Fastener Height M = Bolt Size P = Fastener Width PS = Pipe Size Rigid/EMT RS = Rod Size 23
24 PAR / ET / RA LAMPS For attaching conduits and pipes directly to steel structural members. STEEL BEAM PAR ET RA PS Max Part Number PS IN mm oating PAR0037HD 3/8 3/4 20 HDG 25 PAR0050HD 1/2 3/4 20 HDG 25 PAR0075HD 3/4 3/4 20 HDG 25 PAR0100HD 1 3/4 20 HDG 25 PAR0125HD 1-1/4 3/4 20 HDG 25 PAR0150HD 1-1/2 3/4 20 HDG 25 PAR0200HD 2 3/4 20 HDG 20 PAR0250HD 2-1/2 3/4 20 HDG 10 PAR0300HD 3 3/4 20 HDG 10 PAR0350HD 3-1/2 3/4 20 HDG 10 PAR0400HD 4 3/4 20 HDG 10 PS Max Part Number PS IN mm oating ET0050HD 1/2 3/4 20 HDG 25 ET0075HD 3/4 3/4 20 HDG 25 ET0100HD 1 3/4 20 HDG 25 ET0125HD 1-1/4 3/4 20 HDG 25 ET0150HD 1-1/2 3/4 20 HDG 20 ET0200HD 2 3/4 20 HDG 10 ET0250HD 2-1/2 3/4 20 HDG 10 ET0300HD 3 3/4 20 HDG 10 Ideal for direct attachment of conduit to steel structural sections. Malleable iron casting with steel hardware. Hot dipped galvanized coating for excellent corrosion protection. Range for 3/8 to 4 diameter pipe. Available with stainless steel hardware (special order). PS Max Part Number PS IN mm oating RA0037HD 3/8 3/4 20 HDG 25 RA0050HD 1/2 3/4 20 HDG 25 RA0075HD 3/4 3/4 20 HDG 25 RA0100HD 1 3/4 20 HDG 25 RA0125HD 1-1/4 3/4 20 HDG 25 RA0150HD 1-1/2 3/4 20 HDG 20 RA0200HD 2 3/4 20 HDG 20 RA0250HD 2-1/2 3/4 20 HDG 20 RA0300HD 3 3/4 20 HDG 15 RA0350HD 3-1/2 3/4 20 HDG 10 RA0400HD 4 3/4 20 HDG 10 A = Flange Width = Flange Size = Diameter H = Fastener Height M = Bolt Size P = Fastener Width PS = Pipe Size Rigid/EMT RS = Rod Size 24
25 300 BEAM LAMP For suspending heavy loads and services with threaded rod from steel beams, purlins, channel or angle. P STEEL BEAM H RS M TOP MOUNT BOTTOM MOUNT Part Max H P TOP BOTTOM Number RS M IN mm IN mm IN mm oating Lbs. kn Lbs. kn EG 3/8-16 3/8-16 3/ / / EG EG 1/2-13 3/8-16 3/ / / EG EG 5/8-11 3/8-16 3/ / / EG EG 3/4-10 3/8-16 3/ / / EG Reversible for attachment to top or bottom flange. Available for threaded rod sizes 3/8 to 3/4 dia. Accommodates a wide variety of structural sections including Purlins, angles, channels and beams. Locknut and hardened cup point setscrew to provide secure grip on tapered sections. Malleable iron clamp with electrogalvanized finish for good corrosion protection. Available in hot dipped galvanized finish (special order). Retaining strap available separately, for more secure attachment for industrial or seismic applications. NOTE: Safety factor of 5. RS FIELD BEND L 1 (25 mm) FIELD BEND A Retainer Straps L A Max Part Number RS IN mm IN mm oating FOR USE WITH EG EG 3/ PG EG 3/ PG EG 3/ PG EG 3/ PG EG 3/ PG 100 FOR USE WITH EG EG 1/ PG EG 1/ PG EG 1/ PG EG 1/ PG EG 1/ PG 100 Other size retainer straps available on request. A = Flange Width = Flange Size = Diameter H = Fastener Height M = Bolt Size P = Fastener Width PS = Pipe Size Rigid/EMT RS = Rod Size 25
26 310 BEAM LAMP For suspending heavy loads and services with threaded rod from thick or large lipped steel beams, purlins, channel or angle. STEEL BEAM P H RS M TOP MOUNT BOTTOM MOUNT Max H P TOP BOTTOM Part Number RS M IN mm IN mm IN mm oating Lbs. kn Lbs. kn EG 3/8-16 3/ / / / EG EG 1/2-13 1/ / / / EG Large mouth opening (1-1/4 [32 mm] ) to fit large thick flange steel beams or angles and large lip purlins. Reversible for attachment to top or bottom flange. Available for threaded rod sizes 3/8 and 1/2 dia. Attaches to a wide variety of structural sections including Purlins, angles, channels and beams. Locknut and hardened cup point setscrew to provide secure grip on tapered sections. Malleable iron clamp with electrogalvanized finish for good corrosion protection. Available in hot dipped galvanized finish (special order). Retaining strap available separately, for more secure attachment for industrial or seismic applications. NOTE: Safety factor of 5. RS FIELD BEND L 1 (25 mm) FIELD BEND Retainer Straps L A Max Part Number RS IN mm IN mm oating FOR USE WITH EG EG 3/ PG EG 3/ PG EG 3/ PG EG 3/ PG EG 3/ PG 100 FOR USE WITH EG EG 1/ PG EG 1/ PG EG 1/ PG EG 1/ PG EG 1/ PG 100 Other size retainer straps available on request. A A = Flange Width = Flange Size = Diameter H = Fastener Height M = Bolt Size P = Fastener Width PS = Pipe Size Rigid/EMT RS = Rod Size 26
27 255 BEAM LAMP For suspending components and services using threaded rod from structural members. M STEEL BEAM H RS W Max H W Part Number RS M IN mm IN mm IN mm oating Lbs. kn EG 3/8-16 3/8-16 3/ / / EG EG 1/2-13 3/8-16 3/ / / EG EG 5/8-11 3/8-16 3/ / / EG Available for threaded rod sizes 3/8 to 5/8 dia. For attachment to beams or angles up to 3/4 (20 mm) thick. Hardened cup point setscrew to provide secure grip on tapered sections. Malleable iron clamp with electrogalvanized finish for good corrosion protection. Available with optional locknut and/or in hot dipped galvanized finish (special order). Retaining strap available separately, for more secure attachment for industrial or seismic applications. FIELD BEND 1 (25 mm) L 7/8 A Retainer Straps L A Max Part Number IN mm IN mm oating FOR USE WITH EG & EG EG PG EG PG EG PG EG PG 50 Other size retainer straps available on request. A = Flange Width = Flange Size = Diameter H = Fastener Height M = Bolt Size P = Fastener Width PS = Pipe Size Rigid/EMT RS = Rod Size 27
28 200 BEAM LAMP For suspending components and services using threaded rod from structural members. STEEL BEAM W H RS HOLE AVAILABLE Max H W Part Number RS M IN mm IN mm IN mm oating Lbs. kn EG 3/8-16 3/8-16 3/ / / EG EG 1/2-13 1/2-13 3/ / / EG NOTE: Safety factor of 5. Available for threaded rod sizes 3/8 to 1/2 dia. For attachment to beams or angles up to 3/4 (20 mm) thick. Locknut and hardened cup point setscrew to provide secure grip on tapered sections. Stamped steel with electrogalvanized finish for good corrosion protection. Available in hot dipped galvanized finish or made from AISI 304 stainless (special order). Retaining strap available separately, for more secure attachment for industrial or seismic applications. 1 (25 mm) FIELD BEND L 7/8 A Retainer Straps L A Max Part Number IN mm IN mm oating FOR USE WITH EG & EG EG PG EG PG EG PG EG PG 50 Other size retainer straps available on request. A = Flange Width = Flange Size = Diameter H = Fastener Height M = Bolt Size P = Fastener Width PS = Pipe Size Rigid/EMT RS = Rod Size 28
29 B10 BEAM LAMP For suspension of services and components from straight or inclined structural sections. 2 (50.8 mm) M STEEL BEAM 3 (76.2 mm) RS RS F1 F1 is load rating from the front hole F2 is load rating from the back hole F2 Part Max F1 F2 Number RS M IN mm oating Lbs. kn Lbs. kn B100000EG 1/2 3/8-16 3/4 20 EG Accommodates rod sizes up to 1/2 dia. For attachment to beams or angles up to 3/4 (20 mm) thick. Designed to allow swivel up to 15 from bottom holes or with the use of B15 swivel (available separately) for attachment to inclined beams without bending the rod. Hardened cup point setscrew to provide secure grip on tapered sections. Stamped steel with electrogalvanized finish for good corrosion protection. Available in hot dipped galvanized finish (special order). J-Bolt assembly available for more secure attachment in industrial or seismic applications. J-Bolt Assemblies A Part Number Description IN mm B110000EG Beam lamp with 8 J-Bolt 3-1/ B120000EG Beam lamp with 12 J-Bolt 7-1/ B11JBLTEG J-Bolt assembly only 3-1/ B12JBLTEG J-Bolt assembly only 7-1/ A Swivel Assemblies RS Part Number RS Description oating B150000EG 1/2 Swivel assembly only EG 25 B101500EG 1/2 Beam clamp with swivel assembly EG 25 A = Flange Width = Flange Size = Diameter H = Fastener Height M = Bolt Size P = Fastener Width PS = Pipe Size Rigid/EMT RS = Rod Size 29
30 B26 BEAM LAMP For direct attachment of services or suspension by threaded rod or bridle ring from structural members. STEEL BEAM 1-9/16 (39.7 mm) RS 1-5/16 (33.3 mm) RS M TOP MOUNT M RS Easy installation to steel members up to 3/4 (20 mm) thick. Reversible to allow installation to both top and bottom flange. Hardened cup point setscrew to provide secure grip on tapered sections. Threaded to quickly accommodate attachment of 1/4 dia. threaded rod, bridle rings and boxes from three positions top, bottom and back. Heavy duty malleable iron construction with electrogalvanized finish for added corrosion protection. BOTTOM MOUNT Part Max TOP BOTTOM Number RS M IN mm oating Lbs. kn Lbs. kn B260025EG 1/4-20 1/4-20 3/4 20 EG NOTE: Safety factor of 5. A = Flange Width = Flange Size = Diameter H = Fastener Height M = Bolt Size P = Fastener Width PS = Pipe Size Rigid/EMT RS = Rod Size 30
31 B200 & B400 BEAM LAMPS For direct attachment of conduit, pipe, cables and components or suspension by threaded rod or bridle ring from structural members. RS STEEL BEAM B200 B400 B200D RS LAMPS ONLY Part Max Material Number RS M IN mm & oating Lbs. kn B200 1/4-20 1/4-20 5/8 16 EG B200SS 1/4-20 1/4-20 5/8 16 SS B400 3/8-16 5/ /4 20 EG B200 Easy installation to beam flanges from 1/8-5/8 (3-16 mm). Supports 1/4 threaded rod, 1/4 threaded bridle rings and boxes. Available riveted to conduit clips 1/2 thru 2. Electrogalvanized zinc finish. Now with Slotted, Hex, Phillips, Robertson combo head bolt. Hardened cup point setscrew for secure grip on tapered sections. B400 Threaded holes accommodate 3/8 threaded rod or 3/8 bolt. Attaches to beam flange up to 3/4 (20 mm). Ideal for creating a threaded rod trapeze. ASSEMBLIES Riveted assemblies of B200 clamp and D conduit clips. For information on D conduit clips see Page 55. Stainless Steel PS Part Number oating Part Number Material Rigid EMT B200D0B EG B200D0BSS SS 1/2 1/2 50 B200D1B EG B200D1BSS SS 3/4 3/4 50 B200D2B EG B200D2BSS SS B200D2.5B EG B200D2.5BSS SS 1-1/4 50 B200D3B EG B200D3BSS SS 1-1/4 1-1/2 50 B200D4B EG B200D4BSS SS 1-1/2 25 B200D5B EG B200D5BSS SS NOTE: D conduit clips have a retained bolt and built-in nut, which means there are no separate parts to drop. Available with assembled Retainer Strap or Strap can be ordered as separate item. See Pages PS A = Flange Width = Flange Size = Diameter H = Fastener Height M = Bolt Size P = Fastener Width PS = Pipe Size Rigid/EMT RS = Rod Size 31
32 B BEAM LAMP For direct attachment of conduit, pipe, cables and components or suspension by threaded rod or bridle ring from structural members. M STEEL BEAM # /32 (7 mm) 1/4-20 1/4-20 3/8 (10 mm) Max Part Number IN mm M oating Lbs. kn B 3/8 13 1/4-20 ZP Fig. 1 Fig. 2 PS Easy installation to beam flanges up to 1/2 (13 mm). Supports 1/4 and 3/8 threaded rod, S-hooks, electrical boxes, conduit and bridle rings. Accommodates standard 1/4-20 or #10-24 threaded bridle rings. Now with Slotted, Hex, Phillips, Robertson combo head bolt. PS ASSEMBLIES Fig. PS Part Number No. EMT/Rigid oating Lbs. kn B6M 1 3/8 M/A ZP B812M 1 1/2-3/4 ZP B16M 1 1 ZP B20M 1 1-1/4 ZP B24M 1 1-1/2 ZP B32M 1 2 ZP B812SM 2 1/2-3/4 ZP B16SM 2 1 ZP B20SM 2 1-1/4 ZP B24SM 2 1-1/2 ZP B32SM 2 2 ZP A = Flange Width = Flange Size = Diameter H = Fastener Height M = Bolt Size P = Fastener Width PS = Pipe Size Rigid/EMT RS = Rod Size 32
33 H SERIES HAMMER ON FLANGE LIPS For direct attachment of conduit, pipe, cables and components or suspension by s-hook and jack chain from structural members. 9/32 (7 mm) STEEL BEAM Part Number IN mm oating Lbs. kn 2H4 3/32-9/ ZP H24 1/8-1/4 3-8 ZP H58 5/16-1/ ZP H912 9/16-3/ ZP PS Locates a portable 1/4 hole with just a hammer. Installs easily regardless of insulation material. Available in assemblies to accommodate threaded rod or with ADDY M Series clips for conduit or pipe up to 2 diameter. ASSEMBLIES PS Part Number IN mm Rigid & EMT oating Lbs. kn 6M24SM 1/8-1/ /8 M/A ZP M58SM 5/16-1/ /8 M/A ZP M912SM 9/16-3/ /8 M/A ZP M24SM 1/8-1/ /2 to 3/4 ZP M58SM 5/16-1/ /2 to 3/4 ZP M912SM 9/16-3/ /2 to 3/4 ZP M24SM 1/8-1/ ZP M58SM 5/16-1/ ZP M912SM 9/16-3/ ZP M24SM 1/8-1/ /4 ZP M58SM 5/16-1/ /4 ZP M912SM 9/16-3/ /4 ZP M24SM 1/8-1/ /2 ZP M58SM 5/16-1/ /2 ZP M912SM 9/16-3/ /2 ZP M24SM 1/8-1/ ZP M58SM 5/16-1/ ZP M912SM 9/16-3/ ZP A = Flange Width = Flange Size = Diameter H = Fastener Height M = Bolt Size P = Fastener Width PS = Pipe Size Rigid/EMT RS = Rod Size 33
34 H SERIES HAMMER ON FLANGE LIPS For attaching or suspending conduits, pipe, cables or components with threaded rods from structural sections. STEEL BEAM RS Part RS Number IN mm (Threaded) oating Lbs. kn 4TI24 1/8-1/ /4-20 ZP TI58 5/16-1/ /4-20 ZP TI912 9/16-3/ /4-20 ZP TI24 1/8-1/ /8-16 ZP TI58 5/16-1/ /8-16 ZP TI912 9/16-3/ /8-16 ZP Used to suspend 1/4 or 3/8 threaded rod from beam flanges 1/8-3/4 (3-20 mm) thick. Requires only hammer to install. A = Flange Width = Flange Size = Diameter H = Fastener Height M = Bolt Size P = Fastener Width PS = Pipe Size Rigid/EMT RS = Rod Size 34
35 HAMMER ON FLANGE LIPS Threaded rod, direct attachment to beam clamps, or direct attachment to structure. Flange lip 1/4-20 1/4-20 Part Number IN mm RS oating Lbs. kn M24 1/8-1/ /4-20 ZP M58 5/16-1/ /4-20 ZP M912 9/16-3/ /4-20 ZP STEEL BEAM 1/4-20 Flange lip with Stud 1/4-20 1/4-20 Part Number IN mm oating Lbs. kn M24S 1/8-1/4 3-8 ZP M58S 5/16-1/ ZP M912S 9/16-3/ ZP Provided with 1/4-20 thread impression to support threaded rod. Also available with a staked stud, 1/4-20 x 3/8 to provide easier attachment of outlet boxes to beams. Eliminates having to use loose screws. Available with ADDY conduit clip bottom mounted or side mounted. Available for 3/8 thru 2 EMT, rigid and aluminum conduit. Requires only hammer and pliers to install. Will pivot thru 360. ASSEMBLIES PS 1/4-20 PS Part Number IN mm Rigid & EMT oating Lbs. kn 6M24 1/8-1/ /8 M/A ZP M58 5/16-1/ /8 M/A ZP M912 9/16-3/ /8 M/A ZP M24 1/8-1/ /2 to 3/4 ZP M58 5/16-1/ /2 to 3/4 ZP M912 9/16-3/ /2 to 3/4 ZP M24 1/8-1/ ZP M58 5/16-1/ ZP M912 9/16-3/ ZP M24 1/8-1/ /4 ZP M58 5/16-1/ /4 ZP M912 9/16-3/ /4 ZP M24 1/8-1/ /2 ZP M58 5/16-1/ /2 ZP M912 9/16-3/ /2 ZP M24 1/8-1/ ZP M58 5/16-1/ ZP A = Flange Width = Flange Size = Diameter H = Fastener Height M = Bolt Size P = Fastener Width PS = Pipe Size Rigid/EMT RS = Rod Size 35
36 STRAP HANGER LIPS For installation with banding or strapping. STEEL BEAM Fig. 1 Fig. 2 Accepts wider strap widths up to 1-1/4. The new clips are made from galvanized steel instead of spring steel. This expands the use to more applications, especially when used with other plated parts like our B200 beam clamp. Part Fig. Number No. IN mm oating Lbs. kn MSS24 1 1/8-1/4 3-8 ZP 50/ MSS58 1 5/16-1/ ZP 50/ MSS /16-3/ ZP 50/ MSR24 2 1/8-1/4 3-8 ZP 50/ MSR58 2 5/16-1/ ZP 50/ MSR /16-3/ ZP 50/ NOTE: MSS and MSR are pregalvanized material. Fig. 1 Fig. 2 Fig. Strap Part Number No. Width oating IN mm Lbs. kn MSSB /4 EG 1/8-5/ MSRB /4 EG 1/8-5/ A = Flange Width = Flange Size = Diameter H = Fastener Height M = Bolt Size P = Fastener Width PS = Pipe Size Rigid/EMT RS = Rod Size 36
37 BEAM RETAINER ASSEMBLIES Preassembled beam clamps and restraint straps for beams or other structural members in industrial or seismic applications. Fig. 1 Fig. 2 4WN Wing Nut included Fig. 3 Fig. 4 STEEL BEAM Only one piece to install. Fast installation. Riveted strap eliminates cumbersome assemblies and hardware. Strap is easily bent into position. Lightweight design, heavyweight results. Ideal for seismic locations, as well as industrial applications. Part Fig. Threaded Rod Number No. IN mm Stud or onduit oating Lbs. kn M24S* 1 1/8-1/ /4-20 x 3/8 stud ZP M58S 1 5/16-1/ /4-20 x 3/8 stud ZP M912S 1 9/16-3/ /4-20 x 3/8 stud ZP TI24* 2 1/8-1/ /4-20 threaded rod ZP TI58 2 5/16-1/ /4-20 threaded rod ZP TI /16-3/ /4-20 threaded rod ZP TI24* 2 1/8-1/ /8-16 threaded rod ZP TI58 2 5/16-1/ /8-16 threaded rod ZP TI /16-3/ /8-16 threaded rod ZP M24812M* 3 1/8-1/ /2 & 3/4 conduit ZP M2416M 3 1/8-1/ conduit ZP M58812M 3 5/16-1/ /2 & 3/4 conduit ZP M5816M 3 5/16-1/ conduit ZP M912812M 3 9/16-3/ /2 & 3/4 conduit ZP M91216M 3 9/16-3/ conduit ZP SM 4 1/8-1/ /2 & 3/4 conduit ZP SM 4 1/8-1/ conduit ZP SM* 4 5/16-1/ /2 & 3/4 conduit ZP SM* 4 5/16-1/ conduit ZP SM 4 9/16-3/ /2 & 3/4 conduit ZP SM 4 9/16-3/ conduit ZP NOTE: All assemblies come with 13 (330 mm) strap for up to 11 (280 mm) flanges. Except as noted ( * ) where the strap is 8 (400 mm) for 6 (150 mm) flanges. All Retainer Straps are pregalvanized material. PS Max Part Number IN mm Rigid EMT oating Lbs. kn B200 5/8 16 EG B200 D0B 5/8 16 1/2 1/2 EG B200 D1B 5/8 16 3/4 3/4 EG B200 D2B 5/ EG B200 S2.5B 5/ /4 EG B200 D3B 5/ /4 1-1/2 EG B200 D4B 5/ /2 EG B200 D5B 5/ EG B400 D3B 3/ /4 1-1/2 EG B400 D4B 3/ /2 EG B400 D5B 3/ EG A = Flange Width = Flange Size = Diameter H = Fastener Height M = Bolt Size P = Fastener Width PS = Pipe Size Rigid/EMT RS = Rod Size 37
38 BEAM RETAINER AESSORIES For additional restraint of beam clamps to beams or structural members in industrial or seismic applications. STEEL BEAM Retainer Straps for use with B13 and B14 Beam lamps L A Max Part Number IN mm IN mm oating B090009EG PG 50 B090012EG PG 50 B090015EG PG 25 See pages 21 & /4 (32 mm) 14 GAGE L A Retainer Straps for use with 300 and 310 Beam lamps L A Max Part Number RS IN mm IN mm oating FOR USE WITH EG & EG EG 3/ PG EG 3/ PG EG 3/ PG EG 3/ PG EG 3/ PG 100 FOR USE WITH EG & EG EG 1/ PG EG 1/ PG EG 1/ PG EG 1/ PG EG 1/ PG 100 See pages 25 & 26 1 (25 mm) L RS A FIELD BEND Retainer Straps for use with 200 Beam lamps L A Max Part Number IN mm IN mm oating FOR USE WITH EG & EG EG PG EG PG EG PG EG PG 50 See page 31 7/8 L 1 (25 mm) FIELD BEND A A = Flange Width = Flange Size = Diameter H = Fastener Height M = Bolt Size P = Fastener Width PS = Pipe Size Rigid/EMT RS = Rod Size 38
39 BEAM RETAINER AESSORIES Retainer Straps for use with 255 Beam lamps L A Max Part Number IN mm IN mm oating FOR USE WITH EG & EG EG PG EG PG EG PG EG PG 50 See page 27 7/8 L 1 (25 mm) FIELD BEND A STEEL BEAM J-Bolt for use with B10 Beam lamp A Part Number Description IN mm B110000EG Beam lamp with 8 J-Bolt 3-1/ B120000EG Beam lamp with 12 J-Bolt 7-1/ B11JBLTEG J-Bolt assembly only 3-1/ B12JBLTEG J-Bolt assembly only 7-1/ See page 29 A NOTE: Other sizes, coatings and materials available as a Special Order for all Retainer Straps and J-Bolts. A = Flange Width = Flange Size = Diameter H = Fastener Height M = Bolt Size P = Fastener Width PS = Pipe Size Rigid/EMT RS = Rod Size 39
40 STEEL BEAM Hey ADDY Man... I ve got a better idea for you! (sketch your idea) Photocopy your idea and fax to (800) ATTN: Engineering Department Please include your name, address and phone number! A = Flange Width = Flange Size = Diameter H = Fastener Height M = Bolt Size P = Fastener Width PS = Pipe Size Rigid/EMT RS = Rod Size 40
41 Fasteners for PURLIN PURLIN Heavy Duty Standard Duty Flange Size Hot Dipped Page No. Part Number IN mm Rod Size Zinc Plated Galvanized <1-5/8 <41 3/8 EG SO <3/4 <20 3/8-3/4 EG SO <1-1/4 <32 3/8-1/2 EG SO 45 B10 <3/4 <20 <1/2 EG SO 46 B26 <3/4 <20 1/4 EG 47 VF & AF <1/4 <5.6 1/4-3/8 ZP Available from stock SO = Special Order 41
42 315 PURLIN LAMP For attaching components or services to purlins or beams. 1-13/16 (46 mm) M 1-5/8 (41.3 mm) MAX. 45 PURLIN 1 (25.4 mm) RS 2 (50.8 mm) Max Part Number RS M IN mm oating Lbs. kn EG 3/8-16 3/ EG Large mouth opening (1-5/8-41 mm) to fit large thick flange (bottom flange) steel beams or angles and large lip or Z Purlins. Available for threaded rod sizes 3/8 dia. Attaches to a wide variety of structural sections including Purlins, angles, channels and beams. Locknut and hardened cup point setscrew to provide secure grip on tapered sections. Malleable iron clamp with electrogalvanized finish for good corrosion protection. Available in hot dipped galvanized finish (special order). A = Flange Width = Flange Size = Diameter H = Fastener Height M = Bolt Size P = Fastener Width PS = Pipe Size Rigid/EMT RS = Rod Size 42
43 300 BEAM LAMP For suspending heavy loads and services with threaded rod from steel beams, purlins, channel or angle. P H RS M TOP MOUNT BOTTOM MOUNT PURLIN Reversible for attachment to top or bottom flange. Available for threaded rod sizes 3/8 to 3/4 dia. Accommodates a wide variety of structural sections including Purlins, angles, channels and beams. Locknut and hardened cup point setscrew to provide secure grip on tapered sections. Malleable iron clamp with electrogalvanized finish for good corrosion protection. Available in hot dipped galvanized finish (special order). Max H P TOP BOTTOM Part Number RS M IN mm IN mm IN mm oating Lbs. kn Lbs. kn EG 3/8-16 3/8-16 3/ / / EG EG 1/2-13 3/8-16 3/ / / EG EG 5/8-11 3/8-16 3/ / / EG EG 3/4-10 3/8-16 3/ / / EG A = Flange Width = Flange Size = Diameter H = Fastener Height M = Bolt Size P = Fastener Width PS = Pipe Size Rigid/EMT RS = Rod Size 43
44 310 BEAM LAMP For suspending heavy loads and services with threaded rod from thick or large lipped steel beams, purlins, channel or angle. P H PURLIN RS M TOP MOUNT BOTTOM MOUNT Large mouth opening (1-1/4 [32 mm] ) to fit large thick flange steel beams or angles and large lip purlins. Reversible for attachment to top or bottom flange. Available for threaded rod sizes 3/8 and 1/2 dia. Attaches to a wide variety of structural sections including Purlins, angles, channels and beams. Locknut and hardened cup point setscrew to provide secure grip on tapered sections. Malleable iron clamp with electrogalvanized finish for good corrosion protection. Available in hot dipped galvanized finish (special order). Max H P TOP BOTTOM Part Number RS M IN mm IN mm IN mm oating Lbs. kn Lbs. kn EG 3/8-16 3/ / / / EG EG 1/2-13 1/ / / / EG A = Flange Width = Flange Size = Diameter H = Fastener Height M = Bolt Size P = Fastener Width PS = Pipe Size Rigid/EMT RS = Rod Size 44
45 B10 BEAM LAMP For suspension of services and components from straight or inclined structural sections. 2 (50.8 mm) 3 (76.2 mm) RS RS F1 is load rating from the front hole F2 is load rating from the back hole F1 F2 PURLIN Part Max F1 F2 Number RS M IN mm oating Lbs. kn Lbs. kn B100000EG 1/2 3/8-16 3/4 20 EG Accommodates rod sizes up to 1/2 dia. For attachment to beams or angles up to 3/4 (20 mm) thick. Designed to allow swivel up to 15 from bottom holes or with the use of B15 swivel (available separately) attachment to inclined beams without bending the rod. Hardened cup point setscrew. Stamped steel with electrogalvanized finish for good corrosion protection. Available in hot dipped galvanized finish (special order). RS Swivel Assemblies Part Number RS Description oating B150000EG 1/2 Swivel assembly only EG 25 B101500EG 1/2 Beam clamp with swivel assembly EG 25 A = Flange Width = Flange Size = Diameter H = Fastener Height M = Bolt Size P = Fastener Width PS = Pipe Size Rigid/EMT RS = Rod Size 45
46 B26 BEAM LAMP For attaching or suspending services with threaded rods or bridle rings from structural sections. 1-5/16 (33.3 mm) RS 1-9/16 (39.7 mm) PURLIN RS TOP MOUNT M Easy installation to steel members up to 3/4 (20 mm) thick. Reversible to allow installation to both top and bottom flange. Hardened cup point setscrew to provide secure grip on tapered sections. Threaded to quickly accommodate attachment of 1/4 dia. threaded rod, bridle rings and boxes from three positions top, bottom and back. Heavy duty malleable iron construction with electrogalvanized finish for added corrosion protection. BOTTOM MOUNT Part Max TOP BOTTOM Number RS M IN mm oating Lbs. kn Lbs. kn B26 1/4-20 1/4-20 3/4 20 EG A = Flange Width = Flange Size = Diameter H = Fastener Height M = Bolt Size P = Fastener Width PS = Pipe Size Rigid/EMT RS = Rod Size 46
47 VF & AF PURLIN LIPS For attachment of components or threaded rod to angle, and Z Purlins. 9/32 (7 mm) RS PURLIN 9/32 (7 mm) One fastener fits flanges 1/16 to 1/4 (1.5 to 6 mm). Supports wire or rod from bar joist, Purlin (VF14)or Z Purlin (AF14). Installs from floor with VAFT tool and conduit. VAFT RS Fig. 1 Fig. 2 Fig. 3* Fig. 4 Fig. 5 Fig. 6* Fig. Part Number No. IN mm RS oating Lbs. kn VF14 1 1/16-1/ ZP VF144TI 2 1/16-1/ /4-20 ZP VF146TI 2 1/16-1/ /8-16 ZP VF146T* 3 1/16-1/ /8 ZP AF14 4 1/16-1/ ZP AF144TI 5 1/16-1/ /4-20 ZP AF146TI 5 1/16-1/ /8-16 ZP AF146T* 6 1/16-1/ /8 ZP *Nuts required A = Flange Width = Flange Size = Diameter H = Fastener Height M = Bolt Size P = Fastener Width PS = Pipe Size Rigid/EMT RS = Rod Size 47
48 Hey ADDY Man... I ve got a better idea for you! (sketch your idea) PURLIN Photocopy your idea and fax to (800) ATTN: Engineering Department Please include your name, address and phone number! A = Flange Width = Flange Size = Diameter H = Fastener Height M = Bolt Size P = Fastener Width PS = Pipe Size Rigid/EMT RS = Rod Size 48
49 Fasteners for DEKING DEKING Page No. Part Number Rod Size Zinc Plated 50 TDH 1/4-3/8 EPZ 49
50 TDH LAMP Fastening steel system for suspending threaded rods from roof decking. 1/4 (7 mm) 1/4 (7 mm) RS 13/32 (10.5 mm) Part Number RS oating TDH 3/8 EPZ 50 TDHT4 1/4-20 EPZ 50 TDHT6 3/8-16 EPZ 50 DEKING Minimum roof decking sheet thickness 24 gauge. Maximum trapeze width 2 (50 mm). 1/4 or 3/8 square section nut or 3/8 (10 mm) clearance hole. Max. 2 (50 mm) 13/32 (10.5 mm) Max. 2 (50 mm) 3/4 (20 mm) IN mm Gauge Lbs. kn * Applies to vertical suspension from decking thickness (). * TDHP PROFILE PUNH Easy one-step operation Pre-set dimensions No secondary power source required A = Flange Width = Decking Sheet Thickness = Diameter H = Fastener Height M = Bolt Size P = Fastener Width PS = Pipe Size Rigid/EMT RS = Rod Size 50
51 Fasteners for ONDUIT SUPPORTS Heavy Duty Standard Duty Flange Size Hot Dipped Page No. Part Number Rod Size Pipe Size Zinc Plated Galvanized Stainless Steel 52 PAR / ET / RA 3/8-4 SO /8-5/8 1/2-4 EG SO SO /100 3/8-5/8 1/2-4 EG 55 D 1/4-5/16 1/2-4 EG 56 M Series 1/4 3/8-2 ZP 57 S 1/16-1 EPZ ONDUIT SUPPORTS Available from stock SO = Special Order 51
52 PAR / ET / RA LAMPS For attaching conduits and pipes directly to steel structural members. Max Part Number PS IN mm oating PAR0037HD 3/8 3/4 20 HDG 25 PAR0050HD 1/2 3/4 20 HDG 25 PAR0075HD 3/4 3/4 20 HDG 25 PAR0100HD 1 3/4 20 HDG 25 PAR0125HD 1-1/4 3/4 20 HDG 25 PAR0150HD 1-1/2 3/4 20 HDG 25 PAR0200HD 2 3/4 20 HDG 20 PAR0250HD 2-1/2 3/4 20 HDG 10 PAR0300HD 3 3/4 20 HDG 10 PAR0350HD 3-1/2 3/4 20 HDG 10 PAR0400HD 4 3/4 20 HDG 10 PAR ET RA PS PS Max Part Number PS IN mm oating ET0050HD 1/2 3/4 20 HDG 25 ET0075HD 3/4 3/4 20 HDG 25 ET0100HD 1 3/4 20 HDG 25 ET0125HD 1-1/4 3/4 20 HDG 25 ET0150HD 1-1/2 3/4 20 HDG 20 ET0200HD 2 3/4 20 HDG 10 ET0250HD 2-1/2 3/4 20 HDG 10 ET0300HD 3 3/4 20 HDG 10 ONDUIT SUPPORTS Ideal for direct attachment of conduit to steel structural sections. Malleable iron casting with steel hardware. Hot dipped galvanized coating for excellent corrosion protection. Range for 3/8 to 4 diameter pipe. Available with stainless steel hardware (special order). PS Max Part Number PS IN mm oating RA0037HD 3/8 3/4 20 HDG 25 RA0050HD 1/2 3/4 20 HDG 25 RA0075HD 3/4 3/4 20 HDG 25 RA0100HD 1 3/4 20 HDG 25 RA0125HD 1-1/4 3/4 20 HDG 25 RA0150HD 1-1/2 3/4 20 HDG 20 RA0200HD 2 3/4 20 HDG 20 RA0250HD 2-1/2 3/4 20 HDG 20 RA0300HD 3 3/4 20 HDG 15 RA0350HD 3-1/2 3/4 20 HDG 10 RA0400HD 4 3/4 20 HDG 10 A = Flange Width = Flange Size = Diameter H = Fastener Height M = Bolt Size P = Fastener Width PS = Pipe Size Rigid/EMT RS = Rod Size 52
53 418 ONDUIT HANGER onduit and pipe support for suspension from threaded rod or direct attachment to structure. RS H 7/16 (12 mm) PS Quick and easy installation of pipe after hanger has been installed by using T-slot hole and bolt, without removing nut. For pipe sizes up to 4 dia. Larger sizes available (special order). 7/16 (12 mm) dia. side hole permits wall mounting. Sturdy steel construction with electrogalvanized finish for added corrosion protection. Available in hot dipped galvanized finish or made from AISI 304 or 316 stainless steel (special order). PS H RS Part Number IN mm IN mm IN mm oating Lbs. kn EG 1/ /8 10 EG EG 3/ / /8 10 EG EG / /8 10 EG EG 1-1/ / /8 10 EG EG 1-1/ / /8 10 EG EG / /8 10 EG EG 2-1/ / /2 13 EG EG / /2 13 EG EG 3-1/ / /2 13 EG EG / /8 16 EG ONDUIT SUPPORTS A = Flange Width = Flange Size = Diameter H = Fastener Height M = Bolt Size P = Fastener Width PS = Pipe Size Rigid/EMT RS = Rod Size 53
54 115 / 100 Swivel Loop Hanger onduit and pipe support for suspension from threaded rod. RS H ONDUIT SUPPORTS Quick and simple to install conduit and pipe support. For pipe sizes up to 4 dia. Larger sizes available (special order). Swivel nut makes height adjustment easy. omes finished with pregalvanized band and electrogalvanized swivel nut. PS PS H RS Part Number IN mm IN mm IN oating Lbs. kn EG 1/ / /8-16 EG EG 3/ / /8-16 EG EG / /8-16 EG EG 1-1/ / /8-16 EG EG 1-1/ / /8-16 EG EG / /8-16 EG EG 2-1/ / /8-16 EG EG / /8-16 EG EG 3-1/ / /8-16 EG EG / /8-16 EG A = Flange Width = Flange Size = Diameter H = Fastener Height M = Bolt Size P = Fastener Width PS = Pipe Size Rigid/EMT RS = Rod Size 54
55 D SERIES ONDUIT LIP onduit and pipe support for suspension from threaded rod, direct attachment to beam clamps, or direct attachment to structure. RS PS Fast and easy installation installs with screwdriver or nut driver. Now with Slotted, Hex, Phillips, Robertson combo head. Accommodates 1/2 thru 4 EMT or rigid conduit. Mounting hole size D0 thru D3 for 1/4 bolt. D4 thru D9 for 5/16 bolt. Retained bolt and built-in nut means there are less parts to handle or drop. Electrogalvanized zinc finish. an be used in all locations where EMT or rigid conduit is used. PS Mild Stainless Steel oating Steel Material RS Rigid EMT Lbs. kn D0B* EG D0BSS SS 1/4 1/2" 1/2" D1B* EG D1BSS SS 1/4 3/4" 3/4" D2B* EG D2BSS SS 1/ D2.5B* EG D2.5BSS SS 1/4 1-1/4" D3B* EG D3BSS SS 1/4 1-1/4" 1-1/2" D4B* EG D4BSS SS 5/16 1-1/2" D5B* EG D5BSS SS 5/ D6B EG D6BSS SS 5/16 2-1/2" 2-1/2" D7B EG D7BSS SS 5/ D8B EG D8BSS SS 5/16 3-1/2" 3-1/2" D9B EG D9BSS SS 5/ *Manufactured with retained bolt and built-in nut. Also available in stainless steel 302. ontact factory for price and delivery. To order add suffix SS (ie. D2B-SS). Stainless does not have nutless feature. ONDUIT SUPPORTS A = Flange Width = Flange Size = Diameter H = Fastener Height M = Bolt Size P = Fastener Width PS = Pipe Size Rigid/EMT RS = Rod Size 55
56 M SERIES ONDUIT LIP onduit and pipe support for suspending from threaded rod, direct attachment to beam clamp, or direct attachment to structure. RS PS ONDUIT SUPPORTS Available for 3/8 thru 2 EMT, rigid and aluminum conduit. an be used with Universal lamp for both vertical and horizontal installation of conduit. 1/4-20 thread impressions are provided on the Universal lamp. Available with either a plain hole for 1/4 bolt or a 1/4-20 thread impression. lips have new finger close capability. 6M redesigned to work better with M & A cable. Part Number RS PS Material Lbs. kn 6M 1/4 3/8 M/A ZP M 1/4 1/2-3/4 ZP M 1/4 1 ZP M 1/4 1-1/4 ZP M 1/4 1-1/2 ZP M 1/4 2 ZP M4I 1/4-20 1/2-3/4 ZP M4I 1/4-20 3/8 ZP M4I 1/ ZP M4I 1/ /4 ZP M4I 1/ /2 ZP M4I 1/ ZP A = Flange Width = Flange Size = Diameter H = Fastener Height M = Bolt Size P = Fastener Width PS = Pipe Size Rigid/EMT RS = Rod Size 56
57 S ABLE LIP For direct attachment of cables and conduit to structural members. PS Supports cable from 1/16-1/2 (1.5 to 13 mm) flange. Works effectively with all cable and conduit dimensions from 7/32-1-1/4 (6-32 mm). lip snaps on flange and cable snaps into clip. This is snappy. For positioning only. Part able O.D. PS Number IN mm IN mm EMT Rigid oating S2A 1/16-3/ EPZ 100 S2B 1/16-3/ EPZ 100 S2 1/16-3/ EPZ 100 S2D 1/16-3/ EPZ 100 S2E 1/16-3/ /8, 1/2 3/8 EPZ 100 S2F 1/16-3/ /4 1/2 EPZ 100 S2G 1/16-3/ /4 EPZ 100 S4A 1/16-3/ EPZ 100 S4B 3/16-9/ EPZ 100 S4 3/16-9/ EPZ 100 S4D 3/16-9/ EPZ 100 S4E 3/16-9/ /8, 1/2 3/8 EPZ 100 S4F 3/16-9/ /4 1/2 EPZ 100 S4G 3/16-9/ /4 EPZ 100 S8A 5/16-1/ EPZ 100 S8B 5/16-1/ EPZ 100 S8 5/16-1/ EPZ 100 S8D 5/16-1/ EPZ 100 S8E 5/16-1/ /8, 1/2 3/8 EPZ 100 S8F 5/16-1/ /4 1/2 EPZ 100 S8G 5/16-1/ /4 EPZ 100 ONDUIT SUPPORTS A = Flange Width = Flange Size = Diameter H = Fastener Height M = Bolt Size P = Fastener Width PS = Pipe Size Rigid/EMT RS = Rod Size 57
Cat. No. Finishes & Materials. Standard Finish: Electrogalvanized. Change suffix to SS6(C).
Superstrut Support Systems 1-5/8 in. x 1-5/8 in. Channel and Hardware Superstrut 1-5/8 in. x 1-5/8 in. - 12 Gauge Channel Type A Solid Base Punched Description Solid base -P Punched -HS Half slots Half
More informationCABLE SUPPORT SYSTEMS
CABLE SUPPORT SYSTEMS eaturing the CADDY CAT HP J-Hook System Why CADDY CAT HP? Why Choose CADDY CAT HP over tray? ast and Easy to Install Much faster installation compared to conventional cable or ladder
More informationSECTION 15140 - PIPE HANGERS AND SUPPORTS
Part I - GENERAL 1.01 SECTION INCLUDES A. The work covered under this section consists of the furnishing of all necessary labor, supervision, materials, equipment, and services to completely execute the
More informationlindab duct suspension & support system Duct suspensions & Support systems
lindab duct suspension & support Duct suspensions & Support s lindab duct suspension & support Content Duct suspensions & Support s Duct suspension Duct suspension FB... DRSN... 0 DRSNR... 0 Channels and
More informationOVERALL CONVEYOR WIDTH STEEL ALUMINUM MODEL # PER FT. 10 FT. 5 FT. PER FT. 10 FT. 5 FT. PER FT. 10 FT. 5 FT. PER FT. 10 FT. 5 FT.
Pick Smarter. Pick Better. Pick UNEX. Skatewheel (SW) Skatewheel Gravity Conveyor is ideally suited to convey lightweight packages and where operations require portable or temporary conveyor lines such
More informationPIPE HANGERS AND SUPPORTS PRICE LIST AND CONDENSED CATALOG
PIPE HANGERS AND SUPPORTS PRICE LIST AND CONDENSED CATALOG Price Sheet PH-11.15C Effective: November 30, 2015 Cancels Price Sheet PH-4.15C of April 5, 2015 FOR THE MOST CURRENT PRODUCT / PRICING INFORMATION
More informationLathe Milling Attachment
Lathe Milling Attachment By L C. MASON BY CLEVERLY stacking cold-rolled flat stock together, T-slots and slide for this lathe milling attachment are made without costly machinery. In fact, only two tools,
More informationSECTION 27 05 36 CABLE TRAYS FOR COMMUNICATIONS SYSTEMS
SECTION 27 05 36 CABLE TRAYS FOR COMMUNICATIONS SYSTEMS PART 1 GENERAL 1.01 DESCRIPTION A. The work covered by this section of the Specifications includes all labor necessary to perform and complete such
More informationSTRUCTURAL CONCEPT FOR LIGHT GAUGE STEEL FRAME SYSTEM
Chapter 9 STRUCTURAL CONCEPT FOR LIGHT GAUGE STEEL FRAME SYSTEM 9.1 BACKGROUND Steel is widely used in the construction of multi-storey buildings. However, steel construction is seldom used and is traditionally
More informationFire protection solutions
Fire Protection FPS-13R Fire protection solutions Eaton and Cooper united. Energizing a world that demands more. Discover today s Eaton. Powering business worldwide s a global diversifi ed power management
More informationINSTALLATION INSTRUCTIONS COMPETITION SERIES COILOVER SUSPENSION SYSTEM 03+ Scion xb
INSTALLATION INSTRUCTIONS COMPETITION SERIES COILOVER SUSPENSION SYSTEM 03+ Scion xb NOTE: Progress Technology products should only be installed by a qualified licensed mechanic experienced in the installation
More informationIt's large enough to handle most welding job shop projects, yet small enough to make it a worth while home-workshop tool
It's large enough to handle most welding job shop projects, yet small enough to make it a worth while home-workshop tool H Craft Print Project No. 272 ERE'S a metal bender that will enable you to bend
More informationINSTALLATION OF A BAY WINDOW
INSTALLATION OF A BAY WINDOW Installation of a Bay Window These instructions relate to the replacement of an existing bay window or replacement of a straight window with a new bay window, in an opening
More informationFRAME PROFILE MASONRY METAL DOOR FRAME FLUSH MASONRY KD MITER CORNER JOINT. #8 Screw (MS002485) Required on all fire rated KD frames. Bend Tabs.
FRAME PROFILE MASONRY FLUSH MASONRY KD MITER CORNER JOINT Bend Tabs Head #8 Screw (MS002485) Required on all fire rated KD frames Corner Assembly 2" (50.8) Head Jamb Head Break Away Corner Clip Spot Welds
More informationONTRAC WIRE MESH CABLE TRAY SYSTEM
P R O D U C T D ATA S H E E T ONTRAC WIRE MESH CABLE TRAY SYSTEM K E Y F E AT U R E S Available in two styles: Shaped and Standard Tray Easy to use pathway solution that supports large quantities of network
More informationCable Installation Accessories. Cable Hoisting and Attachment. Snap-In Hangers. SnapStak Hangers
SnapStak Hangers New design increases stack height SnapStak hangers have become the industry standard for maximizing space utilization on crowded towers and now that utility is further expanded with the
More informationBUILT-IN DISHWASHER INSTALLATION INSTRUCTIONS
BUILT-IN DISHWASHER INSTALLATION INSTRUCTIONS PLEASE READ COMPLETE INSTRUCTIONS BEFORE YOU BEGIN LEAVE INSTALLATION INSTRUCTIONS AND USER'S GUIDE WITH OWNER ALL ELECTRIC WIRING AND PLUMBING MUST BE DONE
More informationAccessories for GF and RA machines
Orbital cutting & beveling machines for high-purity process piping www.orbitalum.com Accessories for GF and RA machines A brand of ITW Orbital Cutting & Welding 23 www.orbitalum.com Orbital cutting & beveling
More information1-2 Pair Drop Wire Clamp
ADH -2 Pair Drop Wire Clamp Clamps, Drop Neoprene Shim Dimpled Shim Serrated Shim Used to support one and two pair telephone drop wire at span clamps, drive hooks, and various drop attachments. Aluminum
More informationConnection Solutions
Connection Solutions DESIGN BUILD SYSTEM Connection Solutions for Cold formed Steel Construction Complies with; AS/NZS 4600:2005 AISI S100:2007 AS/NZ 1397 ASTM A653 DESIGN & BUILD SYSTEM FRAMECAD Construction
More informationGuidelines for Earthquake Bracing of Residential Water Heaters
Guidelines for Earthquake Bracing of Residential Water Heaters Department of General Services Division of the State Architect 1102 Q Street, Suite 5100 Sacramento, CA 95814 Phone: (916) 324-7099 Fax: (916)
More informationCable Supports. Requirements for Cable Supports in the National Electrical Code reads as follows:
QA1 General Information are used to support cables in vertical raceways or risers. Cable supports relieve the strain that would be placed on terminations, the interior of panels, or other devices to which
More informationC O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S
C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S January 2009 Issue 6 Valu Guide Brackets The Ultimate in Adjustability and Cost Savings Valu Guide brackets are part of a family
More informationTARIFF CODE and updates standard
TARIFF CODE and updates standard No HS CODE AHTN CODE PRODUCT DESCRIPTION PRODUCT TYPE STANDARDS IDENTIFIED 7207 Semi finished products of iron or non alloy steel Containing by weight less than 0.25% of
More informationCable Trays Technical Instructions & Specifications
Cable Trays Technical Instructions & Specifications Products Catalogue Objective and Structure The company s main objective is the supply of quality products, with respect to: practical design increased
More informationSECTION 23 05 29 - HANGERS AND SUPPORTS FOR HVAC PIPING AND EQUIPMENT
SECTION 23 05 29 - HANGERS AND SUPPORTS FOR HVAC PIPING AND EQUIPMENT PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Pipe hangers and supports. 2. Hanger rods. 3. Inserts. 4. Flashing. 5. Equipment
More informationEberl Iron Works, Inc.
Eberl Iron Works, Inc. Order Form Manual for Stair Pans, Stair Treads and Bent Plate NEW: VISIT US ONLINE AT WWW.STAIRPANS.COM Eberl Iron Works, Inc. 128 Sycamore St. Buffalo, NY 14204 Ph: 716-854-7633,
More informationType 1, 3, & 3R Enclosures
Junction oxes Type 1 Screw over....................................................................... 50-53 Junction oxes Type 1 Hinge over........................................................................
More informationBest Practice Guide to Cable Ladder and Cable Tray Systems
Best Practice Guide to Cable Ladder and Cable Tray Systems Channel Support Systems and other Associated Supports November 2012 BEAMA Best Practice Guide to Cable Ladder and Cable Tray Systems Including
More informationCDGRD-10. Grounding. Solutions For Comm/Data Applications
CDGRD-10 Grounding Solutions For Comm/Data Applications Overview & Table of Contents Cooper B-Line s Grounding products for rack & runway provide a complete solution for grounding metal supports. The offering
More informationKIRÁLY TRADING KFT H-1151 Budapest Mogyoród útja 12-14 tel: 061307-3801 Email_pzoli@kiralytrading.hu. Clamps Clamping devices
04000 Clamps Clamping devices 23000 22000 21000 20000 09000 08000 07000 06000 05000 04000 03000 02000 01000 297 04010 Adjustable straps Tempered steel 1.1191 Black oxide finish nlm 04010-101 Suitable thrust
More informationCable Runways & Accessories
SB17U SB13AL SB17 SB17T SB117 SB17HRB SB2107 SB2101A SB17VRB SB2110A SB2129 SB2129SD SB130 SB2221 SB126 SB2118 SB119 SB2105 113 Cooper B-Line manufactures a wide variety of high quality cable pathway products
More informationOwner's Manual & Assembly Instructions
Owner's Manual & Assembly Instructions PM01 BASE KIT Model No. FDN1014 717090311 CAUTION: SOME PARTS HAVE SHARP EDGES. CARE MUST BE TAKEN WHEN HANDLING THE VARIOUS PIECES TO AVOID A MISHAP. FOR SAFETY
More informationMAST ARMS & POLES. Ornamental Pole Top & Bases
Ornamental Pole Top & Bases Pelco s decorative pole top and bases help make the traffic signal aesthetically pleasing to the eye. Available for various pole diameters and multiple finish options. Ornamental
More informationANTENNA PARTS CATALOG
ANTENNA PARTS CATALOG Maco Antennas 302 S. East St. Mt. Carroll, IL 61053 www.macoantennas.net 815-244-3500 www.antennapartsoutlet.com SCREWS / BOLTS PART SIZE LENGTH DESCRIPTION PRICE S21 10-24 1/2" Machine
More informationPOWERS Controls No. 4 Pneumatic Damper Actuator
POWERS Controls No. 4 Pneumatic Damper Actuator Technical Instructions Document No. 155-032P25 AP 331-2 Actuator Assembly 331-2929 Typical Actuator Assembly 331-2904 Typical Actuator Assembly 331-3000
More informationWisconsin Building Products Evaluation
Safety & Buildings Division 201 West Washington Avenue P.O. Box 2658 Madison, WI 53701-2658 Evaluation # 200813-O Wisconsin Building Products Evaluation Material Best Management Standards for Foundation
More information3M Mobile SkyWalk Series Horizontal Lifeline Product Return Form
3M Mobile SkyWalk Series Horizontal Lifeline Product Return Form THIS FULLY COMPLETED DOCUMENT MUST BE INCLUDED WITH EACH RETURN SHIPMENT IN ORDER FOR CREDIT TO BE ISSUED. ALL CREDITS WILL BE ISSUED TO
More informationDock Hardware & Accessory Products Catalog
Dock Hardware & Accessory Products Catalog Product Page # Product Page # Angle Brackets/Clips 8 Back Up Plate 5 Backing Plate/Hurricane Stop 10 Carriage Bolt Sets 4 Chain Retainer 10 Connector Pin Set
More informationNordson Automatic Spray Gun Support Kits
Nordson Automatic Spray Gun Support Kits Customer Product Manual Issued / For parts and technical support, call the Finishing Customer Support Center at (800) -99. This document is subject to change without
More information1-Way Bracket Assemblies
-Way Bracket Assemblies The Astro-Brac in its various configurations is a truly universal system for mounting signals. The Astro-Brac is designed to facilitate the mounting of any size or combination of
More informationHALF COUPLER HALF COUPLER
HALF COUPLER HALF COUPLER Lightweight & low profile KUPO professional couplers are constructed from high tensile aluminum extrusion and have been developed for installa ons where load capaci es of up to
More informationJames M. Pleasants Company
James M. Pleasants Company SUBMITTAL DATA GAINESVILLE MECHANICAL DECEMBER 20, 2013 PROJECT: GSU: J-183 HUMANITIES LAW BLDG. QUOTE NO:12116 ENGINEER: STEVENS & WILKINSON GASKETED PLATE HEAT EXCHANGER Tag:
More informationSECTION 26 05 49 VIBRATION AND SEISMIC CONTROLS FOR ELECTRICAL SYSTEMS
SECTION 26 05 49 VIBRATION AND SEISMIC CONTROLS FOR ELECTRICAL SYSTEMS PART 1 - GENERAL 1.1 SUMMARY A. This Section includes seismic restraints and other earthquake-damage-reduction measures for electrical
More informationlindab duct suspension & support system Duct suspensions & Support systems
lindab duct suspension & support system Duct suspensions & Support systems lindab duct suspension & support system Content Duct suspensions & Support systems Duct suspension Threaded rod OSB 0... Channels
More informationInternal Strap Assemblies (Box Vehicles)
Commercial Body Fittings LOAD Internal Strap Assemblies (Box Vehicles) Part No. Working Buckle Webbing End Fitting Wgt. (kg) Length (mtr) CARG3309B 2.75 Overcentre 50mm Hook/Hook 0.59 CARG3312B 3.66 Overcentre
More informationSeries 1 Steel Cable Ladder
able Straight Sections See pages LDS-3 & LDS-4 Straight Section overs See page LDS-10 ccessories See pages LDS-5 - LDS-9 Fittings See pages LDS-11 - LDS-17 Fitting overs See page LDS-10 LDS-1 able Support
More informationInstallation Guide 2010 BMW S1000RR Full Exhaust System
Installation Guide 2010 BMW S1000RR Full Exhaust System!! THIS PRODUCT IS DESIGNED FOR USE IN CLOSED COURSE RACING AND IS NOT INTENDED FOR HIGHWAY USE!! Congratulations on the purchase of your new TaylorMade
More informationAstroSystems Digital Setting Circles for Zhumell, GSO, Apertura and Astro-Tech
AstroSystems Digital Setting Circles for Zhumell, GSO, Apertura and Astro-Tech Components 1 Sky Commander Digital Setting Circle Computer 2 Encoders 10,000 step 1 Sky Commander Digital Setting Circle Manual
More informationMetal Bending Tools, Scribes & Awls
Metal Bending Tools, Scribes & Awls 35 malco tool book better ideas for the real world. Hand Seamers Die-Cast Zinc Jaws Not for use with steel Die-Cast Zinc Jaws Not for use with steel Easy Folding Bends
More informationPartitioning & Ceiling Product Information
Partitioning & Ceiling Product Information tel + 44 (0) 1384 412448 fax + 44 (0) 1384 4494 email enquiries@drywallsteelsections.co.uk web www.drywallsteelsections.co.uk tel + 44 (0) 1384 412448 fax + 44
More informationInstallation Instructions 4508 4508S
SYMPHONY Spread Lavatory Faucet with Speed Connect Drain Congratulations on purchasing your American Standard faucet with Speed Connect drain, a feature found only on American Standard faucets. Speed Connect
More informationFormwork Direct International Ltd Phone No +44 (0151) 532 0179 Fax no +44 (0151) 523 8330 E-Mail: sales@formworkdirect.co.
Tie Rod & Formwork s well as containing our comprehensive range of Formwork Tie Sytems; this section also covers our market leading Rapidobat Column Former. Exclusive also to Formwork Direct are innovations
More information6720616592.00-1.SD. Flat roof. Rack Mounting. Installation instructions 6 720 647 036 (2010/11) AU
6720616592.00-1.SD Flat roof Rack Mounting AU Installation instructions 2 Contents AU Contents 1 Key to symbols and safety instructions....... 3 1.1 Explanation of symbols................ 3 1.2 Safety
More informationPREASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS
SYSTEM COMPONENTS PREASSEMBLED ELEMENTS FOR FIFTING AND SLIDING DOORS s r ood gn i d i l s dna gn i t f i f r o f s t neme l e de l bme s s ae r P PREASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS These
More informationRack installation instructions
Rack installation instructions Review the documentation that comes with the rack cabinet for safety and cabling information. Before you install the server in a rack cabinet, review the following guidelines:
More informationCT-02 CABLE TRAY SYSTEMS
CT-02 CABLE TRAY SYSTEMS SYSTEMS THAT MAKE SENSE Introduction B-Line Systems was formed in 96 and has over 30 years experience manufacturing cable tray systems in which it has grown to become the industry
More informationINSTRUCTIONS THOROUGHLY BEFORE BEGINNING***************
Bill of Materials: RAC0012 Green Wing Aerodynamic Skirt Kit Item Part Number Description Quantity 1 RMC0218 Gen 2 Trailer Skirt Roadside 1 2 RMC0219 Gen 2 Trailer Skirt Curbside 1 3 RMC0041 Trailer Skirt
More informationINSTALLATION AND OPERATING INSTRUCTIONS For Model GL1 Gate Locks
Securitron Magnalock Corp. www.securitron.com ASSA ABLOY, the global leader Tel 800.624.5625 techsupport@securitron.com in door opening solutions INSTALLATION AND OPERATING INSTRUCTIONS For Model GL1 Gate
More informationRittal s Comprehensive Family Of... NETWORK RACK SOLUTIONS
Rittal s Comprehensive Family Of... NETWORK RACK SOLUTIONS STANDARD & ECONOMICAL BasicRack A complete low-cost, high-quality basic equipment management system. Design Six web channel holes per side allow
More informationFront axle components, overview
just a test. Front axle components, overview 40-1 General Information Load bearing components and parts of the suspension must not be welded or straightened. Vehicles without drive axle must not be moved,
More informationPipe Cutting and Beveling Clamshells
Pipe Cutting and Beveling Clamshells Who We Are One Company, Total Support, Complete Solutions For more than a century, Hydratight has provided world-class bolted joint solutions and continues to set international
More informationDTU Animal Cart Programme
DTU Animal Cart Programme TECHNICAL 21 RELEASE PIPE AND ROLLER DONKEY CART AXLES Development Technology Unit, Department of Engineering, University of Warwick, Coventry, CV4 7AL UK, tel: +44 (0)1203 523523
More informationModel # 940P-V6. Page 1 of 11
Model # 940P-V6 Page 1 of 11 Page 2 of 11 WARRANTY & TERMS WARRANTY: 5 Year Limited Warranty on Thermoplastic coated elements. Ultra Play guarantees all items for one full year to be free of defects in
More informationStep by Step instructions How to screw in wood and plastic
Step by Step instructions How to screw in wood and plastic Different screw heads As well as the simple slotted screw head, there are three different types of screw heads into which the screwdriver or bit
More informationCat. No. Material Siderail Height. Designed to lock into place for easy alignment and installation. ABW-4-SSP
Metallic Snap-In Splice Plate Designed to lock into place for easy alignment and installation. Packaged in pairs with zinc plated hardware. Provided as standard with each straight and fitting. Cat. No.
More informationDrive shaft, servicing
Volkswagen Passat B6 - Drive shaft, servicing Стр. 1 из 41 40-7 Drive shaft, servicing Drive shafts, overview I - Assembly overview: Drive axle with CV joint VL100 40-7, Drive axle with CV joint VL100,
More informationGuidelines for Earthquake Bracing Residential Water Heaters
Guidelines for Earthquake Bracing Residential Water Heaters Department of General Services Division of the State Architect In accordance with the Health and Safety Code Section 19215, the Division of the
More informationK. D. FRAME ASSEMBLY FOR CLOSED STEEL STUD WALLS...Ins 10. FRAME INSTALLATION DETAILS FOR CLOSED STEEL STUD WALLS...Ins 11
K. D. FRAME ASSEMBLY FOR MASONRY WALLS...........................Ins 2 FRAME INSTALLATION DETAILS FOR MASONRY WALLS......................Ins 3 INSTALLING EXISTING MASONRY WALL ANCHORS IN FRAME..................Ins
More informationMicro Precision Tools Your partner for precision applications
Micro Precision Tools Your partner for precision applications 2K Softgrip Micro Screwdrivers (page 72-73) Working in restricted areas is a particular problem especially in modern equipments, such as electronic
More informationInstallation guide for the SafeLine type anchorage device. Tested in compliance with EN 795: 1996. No.: SE-...
Installation guide for the SafeLine type anchorage device Tested in compliance with EN 795: 1996 No.: SE-... Version: 09.10.2008 SE 67 Subject to technical alterations! Contents 1. General information
More informationTRANS-05, Torque Tube Removal, Rebuilding, and Installation
TRANS-05, Torque Tube Removal, Rebuilding, and Installation Tools Metric Wrench Set Metric Socket Set Jack Stands (6 minimum) Floor Jack 8mm Cheesehead socket (also referred to as 12 point internal socket
More informationMODEL HSR-007 Direct Drive Rolling Steel
MODEL HSR-007 Direct Drive Rolling Steel 200 Fairview Road, Unit #2, Barrie, Ontario L4N 8Z8 Tel: 866-792-9968 or 705-792-9968 Fax: 705-735-9564 www.tnrdoors.com email: info@tnrdoors.com Model HSR-007
More informationPUMP JACK SYSTEM AND ACCESSORIES
Pump Jack Model # 2200 A low cost, easy to operate, safe, portable scaffolding built of rugged steel. It's perfect for shingling, siding, sheathing, insulating, painting, building, roofing, home repair
More informationHORIZONTAL INSTALLATION
THERMO/SOLAR Žiar s.r.o. MANUAL FOR INSTALLATION PV SUPPORTING FRAMES HORIZONTAL INSTALLATION Technical alternation reserved A1410 1 12/2014 CONTENT ORD.NO. PAGE Mounting information 3 Mounting, flat roof
More informationFLEXTRAY. It s Simple Cable Management CBFT-10. Catalog & Product Installation Guide
CBFT-10 FLEXTRAY It s Simple Cable Management Catalog & Product Installation Guide Flextray Flextray is a flexible, field-adaptable way to manage cables throughout your project. The tray itself can be
More informationThere is no upside to. down time
EXPANDED and PERFORATED Data and Specifications 30 Similar to Type 302 with excellent mechanical properties, resistance to many corrosive agents. Useful where sanitation and cleanliness are important.
More informationWatts Spacemaker. Sa f e t y Wa t e r He a t e r. Enclosures Stands Restraints
Watts Spacemaker Sa f e t y Wa t e r He a t e r Installation Products Enclosures Stands Restraints Ta b l e o f Co n t e n t s / In t r o d u c t i o n / Seismic Zo n e s Table of Contents Seismic Zones
More informationDiameter. Swift Lift Round Recess Plug. Note: The diameter of the narrow recess plug is the same as the diameter of the round recess plug.
P-5 The P-5 is hot forged from carbon steel. The formed head provis spherical seating that the Lifting Eye engages, while a disc-shaped foot is embedd in the concrete. Due to its being a forged part, the
More informationCNC Tool Storage Solutions
Solutions CNC TOOL STORAGE SOLUTIONS Thanks to the flexibility of the CNC line, your tools will be protected during regular handling, transportation and storage. The Rousseau CNC tool rack distinguishes
More informationRemovable Aluminium posts
Post Solent Sail Shades Ltd 120 Billington Gardens Hedge End Southampton SO30 2RT Tel/Fax: 01489 788243 www.solentsailshades.co.uk Email: info@solentsailshades.co.uk Removable Aluminium posts Single Pole
More informationPremier & Deluxe 3-Season Room Sliding Glass Door
DTSSGD-11 Premier & Deluxe 3-Season Room Sliding Glass Door Installation Instructions Screen Door Seal Left Side Track Top Track Assembly Right Side Track Right Side Trim Sliding Glass Door Sliding Screen
More information9,000lb capacity 4 Post Lift Installation Manual
9,000lb capacity 4 Post Lift Installation Manual Parts Checklist 1 Main side track with 9/16 hole on cylinder end complete with cylinder, hose and connector 1 Offside track 2 Cross Rails pre-assembled
More informationM2 Antenna Systems, Inc. Model No: KT34M2
M2 Antenna Systems, Inc. Model No: KT34M2 10m f, MHz G, dbi F/B, db 28.0 7.3 18 28.2 7.3 23 28.4 7.4 25 28.6 7.5 24 29.2 7.6 20 15m f, MHz G, dbi F/B, db 21.0 6.9 19 21.1 6.9 22 21.2 7.0 24 21.3 7.0 24
More informationChapter 10 - Scaffolding Systems
Chapter 10 - Scaffolding Systems Contents Chapter 10 - Scaffolding Systems... 10-1 Check and Oil the Pump Jacks... 10-4 Set Pump Jack Brackets... Error! Bookmark not defined. Set Pump Jack Poles... 10-5
More informationusg.com/me USG Middle East, Ltd. Dammam, Saudi Arabia E-mail: info@usgme.com Fax: +966 3 8121029 +966 3 8120995
USG Middle East, Ltd. Dammam, Saudi Arabia E-mail: info@usgme.com Fax: +966 3 8121029 +966 3 8120995 Riyadh, Saudi Arabia E-mail: riyadhsales@usgme.com Fax: +966 1 4772734 +966 1 4772734 Jeddah, Saudi
More informationTopSky DLG Installation Manual
TopSky DLG Installation Manual Attention: Because after the compound materials solidify, there will be ammonia iris on the surface, which affect the bonding strength afterwards. Please polish with sandpaper
More informationInstallation Guide. Bath and Wall Surrounds SERIES 7104 1021861-2-B
Installation Guide and Wall Surrounds SERIES 7104 1021861-2-B Thank You For Choosing Sterling We appreciate your commitment to Sterling value. Please take a few minutes to review this manual before you
More informationSECTION 08332 COILING COUNTER DOORS. Display hidden notes to specifier. (Don't know how? Click Here)
SECTION 08332 COILING COUNTER DOORS Display hidden notes to specifier. (Don't know how? Click Here) PART 1 GENERAL 1.1 SECTION INCLUDES A. Coiling Metal Counter Doors. B. Coiling Counter Fire Doors. 1.2
More informationINSTALLATION INSTRUCTIONS. 6108 Air Spring Kit 2011+ Ford F250 Single Wheel 4WD 2011+ Ford F350 Dually 4WD (2011 F350 Single Wheel 4WD use p/n 6113)
INSTALLATION INSTRUCTIONS 6108 Air Spring Kit 2011+ Ford F250 Single Wheel 4WD 2011+ Ford F350 Dually 4WD (2011 F350 Single Wheel 4WD use p/n 6113) Thank you for purchasing a quality Hellwig Product. PLEASE
More informationPole Lathe and Shave Horse Design
Pole Lathe and Shave Horse Design These pictures and accompanying words are Copyright Michael Hughes February 2002. They are not to be re-produced, in part or whole, without permission from the author.
More informationModular Locomotive System Instruction Manual for HBK8 George Body Kit
Modular Locomotive System Instruction Manual for HBK8 George Body Kit Roundhouse Engineering Co. Ltd. Units 6-10 Churchill Business Park. Churchill Road, Wheatley. Doncaster. DN1 2TF. England. Tel. 01302
More informationAccessories. KwikWire Clamps. KwikWire Clamp Working Loads* 78205140719 BKC100 1 /16" & 3 /32" 100 78205140723 BKC200 1 /8" & 3 /16" 50
KwikWire Clamps KwikWire system replaces jack chain or ATR to support lighting, ductwork, cable tray, etc. Can be quickly installed around beams - No drilling required. Ideal for sloped ceilings - can
More informationAssembling an AR-15 Parts CheckList:
Assembling an AR-5 Parts CheckList: Table of Contents Upper Receiver Common Parts... A, A2 & A3 sights... 2-3 BARREL COMPONENTS... 4-5 BOLT & BOLT CARRIER COMPONENTS... 6 LOWER RECEIVER COMMON PARTS...
More informationIKG Bar Grating: Anchoring
IKG Bar Grating: Anchoring All bar grating must be tightly fastened in place. Welding of the grating panels to the supporting members provides a superior, permanent installation. Although, for gratings
More informationF-Series Camera Mounting Accessories
F-Series Camera Mounting Accessories Document Number: 427-0462-00-12 Version: 100 Issue Date: September 2010 2010. All rights reserved worldwide. FLIR Commercial Systems, Inc. 70 Castilian Drive Goleta,
More informationBAGGAGE HANDLING SYSTEMS. Trastecnica S.p.A. Handling Baggage Systems Edition 2002 - Rev. 00-1 -
BAGGAGE HANDLING SYSTEMS Trastecnica S.p.A. Handling Baggage Systems Edition 2002 - Rev. 00-1 - TECHNICAL SPECIFICS INDEX Check-in with one conveyor 4 Scales 6 Belt Conveyors 8 Take away 9 Feeder and Belt
More informationTELESCOPE Motorized Lighting Suspension
TELESCOPE Motorized Lighting Suspension Mod. 8400 FEATURES The De Sisti TELESCOPE is a single point suspension specifically designed to provide rigidity and stabilization of all moving parts. It can extend
More informationWORKPLACE SHELVING STORAGE RACKS SHOP FURNITURE & SPECIALTY STORAGE
WORKPLACE SHELVING STORAGE RACKS SHOP FURNITURE & SPECIALTY STORAGE Look to Tri-Boro for: Outstanding Quality Affordable Pricing & Ontime Delivery Online PDF Catalog Pages Tri-Boro Shelving and Partition
More information