2D IMAGER MODELS - 7Qi, 7Xi, 7XiRx
|
|
|
- Verity Robbins
- 7 years ago
- Views:
Transcription
1 COMMAND BARCODES 2D IMAGER MODELS - 7Qi, 7Xi, 7XiRx This document pertains to the following CHS Series 7: Model P/N 7Qi Blue Qi Gray Qi Green Qi Red Qi White Qi Yellow Xi Gray XiRx White The part number (P/N) is labeled inside the battery compartment for the CHS Series 7.
2 Table of Contents General Command Barcodes Data Editing - Prefix/Suffix Rumble/Beep Modes Language Settings QX Stand Modes Apple ios Oscreen Keyboard Advanced Users Only 1D Symbologies 2D Symbologies Postal Symbologies SCANNER MODES
3 GENERAL COMMAND BARCODES INSTRUCTIONS: Scan command barcode(s) to quickly configure the barcode scanner. Many of the command barcodes only work with a scanner in a particular Bluetooth mode as indicated by the header row of each table. All Bluetooth Connection Modes OK Scan only with CHS in SPP or ios Mode Scan only with CHS in HID Mode Symbologies Make sure the CHS is not connected to a host computer or device before scanning a command barcode! To use the CHS on multiple hosts, perform the unpair sequence. 1. Power on the CHS. 2. Press and hold down the trigger button. 3. Press and hold down the power button. 4. After you hear 3 beeps, release both buttons. By default, the CHS is in HID mode as a Keyboard device. For scanners in Bluetooth SPP or ios mode, you can alternatively configure some settings by using the Scanner Settings app. You can download the app from itunes, and Google Play. 3
4 Scan command barcode(s) to quickly configure the CHS. By default, the CHS is in HID mode as a Keyboard device. IMPORTANT! Make sure the CHS is not connected to a host computer / device before scanning a command barcode! Bluetooth Connection Mode (General) HID-Keyboard (default) Configures the CHS as a Keyboard class device (required for Apple ios / Mac OS, Nokia E71). #FNC HID Acceptor # HID-Peripheral Configures the CHS as a Peripheral class device (optional for Windows and Android). #FNC COD HID # SPP Mode Changes the CHS to Bluetooth Serial Port Profile (SPP) mode (optional for Windows and Android). #FNC SPP Acceptor # ios Mode Changes the CHS 7Qi, 7Xi, 7XiRx to Apple ios mode (equivalent to SPP mode). #FNC IOS ACCEPTOR # Factory Reset Configures the CHS to revert all settings to factory defaults. The CHS powers off after scanning this barcode. #FNB41FB970001# Factory Defaults 4
5 DATA EDITING PREFIX / SUFFIX You can configure the CHS to automatically add a suffix and/or prefix to each scan of data. Note: Scanning multiple commands in a single instance will overwrite (not append) the previous command. Character or Command to Insert Scan to Enable Carriage Return Suffix (Default) #FNB 4160C100010D# Tab Suffix #FNB 4160C # Carriage Return & Line Feed Suffix #FNB 4160C100020D0A# Data As Is No prefix or suffix #FNB 4160C10000# 5
6 RUMBLE/BEEP MODES Important! Make sure the CHS is not connected to a host computer before scanning a command barcode. *Barcodes only work for 7Xi/7Qi with Rev M and above. For Rev M and below refer to page 12. Rumble/Beep Modes Vibrate On Enables CHS to vibrate to indicate successful scan #FNB FA0000# Vibrate Off Disables CHS from vibrating to indicate successful scan #FNB # Beep On Enables CHS to vibrate to indicate successful scan #FNB01190E B# Beep Off Disables CHS from beeping to indicate successful scans #FNB01190E B# 6
7 LANGUAGE SETTINGS Scan to Enable HID Keyboard Language Settings Language English #FNB41FBA10000# French #FNB41FBA10001# German #FNB41FBA10002# Spanish #FNB41FBA10003# 7
8 QX STAND MODES QX Stand Modes Mobile Mode - Normal (default)* Scanning this bar code will enable the scanner to enter mobile mode. It will always be in manual trigger mode even when placed in the stand or cradle. *Scanner Factory Reset returns to Mobile Mode. #FNB 41FBA50000# Auto Mode (Presentation Mode) Scanning this bar code will enable the scanner to enter auto mode. When the scanner is in auto mode, it will switch to presentation trigger mode when it detects power on the cradle pins. When the scanner is removed from the cradle it will remain in presentation trigger mode until the users presses the trigger. At that point it will switch to normal manual trigger mode. Auto Mode command barcode is also printed on the product label. #FNB 41FBA50003# 8
9 APPLE IOS OSCREEN KEYBOARD Apple ios Onscreen Keyboard Apple ios Onscreen Keyboard and Beep Enabled (Default) Configures the CHS to activate the ios onscreen keyboard when connected to an ios device and the CHS power button is double-pressed. Scan only with CHS in HID mode Disable both Onscreen Keyboard and Beep #FNB 41FBDA000C # Enable Beep #FNB 41FBDA000C # Disable Beep #FNB 41FBDA000C # 9
10 ADVANCED USERS ONLY Bluetooth Connection Modes *Barcodes only work for 7Xi/7Qi with Rev M and above. For Rev M and below refer to page 4. HID Mode (default) Configures the CHS to Human Interface Device (HID) mode. The CHS will be discoverable as a Keyboard to other Bluetooth devices. Required for Apple ios, Mac OS, Nokia E71. #FNB00F40001# HID-Keyboard (default) Changes a CHS in HID-Peripheral mode to HID-Keyboard mode. Required for Mac OS and Nokia E71, optional for Apple ios. #FNB # HID-Peripheral Changes a CHS in HID-Keyboard mode to HID-Peripheral mode. Optional for Windows and Android. #FNB # SPP Mode Configures the CHS to Serial Port Profile (SPP) mode. Required for BlackBerry, optional for Windows and Android. #FNB00F40000# ios Mode Changes a CHS 7Ci to ios mode. Required for Apple ios applications developed with SocketScan 10 SDK. #FNB00F40002# 10
11 SPP Acceptor Mode Changes the CHS to Bluetooth Serial Port Profile (SPP) mode as an acceptor (waits for computer / device to initiate connection). #FNC SPP Acceptor # Bluetooth Connection Mode (ADVANCED Users Only) SPP Initiator Mode Changes the CHS to Bluetooth Serial Port Profile (SPP) mode as an initiator. Use barcode generating software or website (e.g., com) to create a barcode with the following data: #FNC SPP Initiator aabbccddeeff# N/A Where aabbccddeeff is the Bluetooth Device Address of the computer / device you want to connect the CHS to. Recommended barcode (module) width: 2-3cm Bluetooth Connection Roles For SPP or ios Mode Only Rumble/Beep Mode (Advanced Users) Acceptor (default) Configures the CHS to accept a Bluetooth connection puts the CHS in discoverable mode. #FNA# Initiator Configures the CHS to initiate a connection to a computer / device with the Bluetooth Device Address specified in the barcode. The barcode must be formatted in Code 128 and contain the data #FNIaabbccddeeff# such that aabbccddeeff is the Bluetooth Device Address of the computer/device you want to connect to the CHS. Required for Windows when using SPP mode. You must create a custom barcode for each computer / device that you want to connect to the CHS. Use barcode generating software or website (e.g., 11
12 Raw Mode Configures the CHS to raw mode (i.e., all scan data is sent as raw bytes instead of packets). #FNB 41FB9B0000# Data Mode Rumble/Beep Mode (Advanced Users) Packet Mode Configures the CHS to packet mode (i.e., the CHS encapsulates scan data into packets, with header and tail information to ensure integrity of data when received by host). #FNB 41FB9B0001# Rumble/Beep Mode (Advanced Users) Configures the CHS to Beep, Flash the LED Green, and Vibrate after successfully decoding data Scan only with CHS in HID mode Enable Beep and Vibrate #FNB 41FB990007# Disable Beep and Vibrate #FNB 41FB990002# Disable Vibrate #FNB 41FB990003# Disable Beep #FNB 41FB990006# 12
13 Scan to Enable WITH BEEP Special Commands for HID Mode Scan to Enable NO BEEP #FNB4 1FBDA000C D # Ctrl + Z #FNB 41FBDA000C D # #FNB 41FBDA000C # Ctrl + A #FNB 41FBDA000C # #FNB 41FBDA000C B # Shift + Tab #FNB 41FBDA000C B # #FNB 41FBDA000C # Ctrl + S #FNB 41FBDA000C # 13
14 1D SYMBOLOGIES Important! Print out page to scan. Do not scan on screen. *Default Scan to Enable Symbologies Scan to Disable Codabar Code 93 / Code 93i Interleaved 2 of 5 14
15 Scan to Enable Symbologies Scan to Disable *EAN/UPC UPC-E *EAN/UPC UPC-E EAN/UPC UPC-E1 *EAN/UPC EAN 8 15
16 Scan to Enable Symbologies Scan to Disable Standard 2 of 5 GS1 DataBar (RSS) *EAN/UPC EAN-13 *Code 128 / GS
17 Scan to Enable Symbologies Scan to Disable *Code 39 Code 11 17
18 2D SYMBOLOGIES Important! Print out page to scan. Do not scan on screen. *Default Scan to Enable Symbologies Scan to Disable Aztec *Data Matrix (Required to scan onscreen barcode in Socket EZ Pair for SPP mode) MaxiCode 18
19 Scan to Enable Symbologies Scan to Disable QR Code MicroPDF417 *PDF417 GS1 Composite CC-A/B 19
20 Scan to Enable Symbologies Scan to Disable GS1 Composite CC-C GS1 DataBar (RSS) Limited GS1 DataBar (RSS) 20
21 POSTAL SYMBOLOGIES Important! Print out page to scan. Do not scan on screen. *Default Scan to Enable Symbologies Scan to Disable Australian Post BPO 4-State Canada Post 21
22 Scan to Enable Symbologies Scan to Disable Dutch Post Infomail Japan Post Planet 22
23 Scan to Enable Symbologies Scan to Disable Postnet Sweden Post 23
24 SCANNER MODES Note: Scanning multiple commands in a single instance will overwrite (not append) the previous command. IMPORTANT! Print out page to scan. Do not scan on screen. *Default Scan to Enable Symbologies Scan to Disable *Factory Reset Configures the CHS to revert all settings to factory defaults. The CHS wil power off after scanning this barcode. N/A Continuous Scanning Mode Makes the CHS automatically trigger the scanning beam every few seconds. N/A Presentation Mode Makes the CHS automatically activate the scanning beam after a barcode is detected within scanning range. N/A 24
25 Scan to Enable Symbologies Scan to Disable Aiming Beam Makes an aiming beam appear when the CHS trigger button is pressed. Center Decoding When enabled, the CHS reads only the barcode that the scanner is aimed at. Helpful for barcodes positioned close together. Decode 1D Barcodes Only Disables CHS from decoding 2D barcodes. N/A *Decode 1D and 2D Barcodes Configures the CHS to revert all settings to factory defaults. The CHS wil power off after scanning this barcode. N/A 25
26 Scan to Enable Symbologies Scan to Disable Decode in Bright Environment Enables the CHS to scan 1D and 2D barcodes in bright environment. N/A Decode on Reflective Surface Enables the CHS to decode 1D and 2D barcodes printed on shiny surfaces N/A 26
27
APPENDIX E COMMAND BARCODES
APPENDIX E COMMAND BARCODES Scan command barcode(s) to quickly configure the Socket Bluetooth Cordless Hand Scanner v3 (1D laser versions). By default, the CHS is in HID mode as a Keyboard device. IMPORTANT!
QUICK START GUIDE Bluetooth Cordless Hand Scanner (CHS)
QUICK START GUIDE Bluetooth Cordless Hand Scanner (CHS) 1D Imager Models CHS 7Ci, 7Di, 7DiRx LED Trigger button Power button (also for ios Keyboard Pop-up) Model shown: CHS 7Di This document pertains to
Socket Bluetooth Cordless Hand Scanner (CHS) 7Xi and 7XiRx. 2D and 1D Barcode Scanners. User s Guide
Socket Bluetooth Cordless Hand Scanner (CHS) 7Xi and 7XiRx 2D and 1D Barcode Scanners User s Guide 1/2013 Document # 6410-00233 O COPYRIGHT NOTICE Copyright 2010-2013 Socket Mobile, Inc. All rights reserved.
because we care MS910 Wireless Barcode Scanner Quick Guide Full user s manual is available on the enclosed CD. Version 1.2 400947G
because we care MS910 Wireless Barcode Scanner Quick Guide Full user s manual is available on the enclosed CD. Version 1.2 400947G because we care OUT OF THE BOX INTRODUCTION 2. Trigger 3. LED Indicator
Socket Bluetooth Cordless Hand Scanner (CHS) 1D Imager Models 7Ci, 7Di, 7DiRx. User s Guide
Socket Bluetooth Cordless Hand Scanner (CHS) 1D Imager Models 7Ci, 7Di, 7DiRx User s Guide 4/2014 Document# 6410-00343 C Copyright 2014 Socket Mobile, Inc. All rights reserved. COPYRIGHT NOTICE Socket,
SocketScan Software Advanced Programming Guide
SocketScan Software Advanced Programming Guide A guide to help you program symbology and parameter settings for the following Socket barcode scanning products: Secure Digital Scan Card Series 3 CompactFlash
Wireless Scanner. User s Manual - MS910 - Version 1.0
Wireless Scanner - MS910 - User s Manual Version 1.0 Table of Contents Chapter 1 Overview... 1 Introducing the MS910... 1 Package Contents... 2 Chapter 2 Installation and Connection... 5 Connecting (Pairing)
SG20T. Tethered Scanner. User s Guide
SG20T Tethered Scanner User s Guide Intermec by Honeywell 6001 36th Ave.W. Everett, WA 98203 U.S.A. www.intermec.com The information contained herein is provided solely for the purpose of allowing customers
CT20 Barcode Scanner User Manual
CT20 Barcode Scanner User Manual IMPORTANT NOTICE Safety Precaution * DO NOT disassemble the scanner, or place foreign matter into the scanner cause a short circuit or circuit damage. * DO NOT expose the
CS4070 SCANNER PRODUCT REFERENCE GUIDE
CS4070 SCANNER PRODUCT REFERENCE GUIDE CS4070 SCANNER PRODUCT REFERENCE GUIDE MN000762A01 Revision A August 2014 ii CS4070 Scanner Product Reference Guide No part of this publication may be reproduced
Connecting a Bluetooth Scanner to your Android Device
Connecting a Bluetooth Scanner to your Android Device Chapter 1: CT 20/30... 1 Chapter 2: Motorola Symbol CS3070... 2 Chapter 3: Socket Mobile 7Ci... 3 Chapter 4: Opticon 2002/2005... 5 Chapter 5: Scanfob
Bluetooth Version FUZZYSCAN FAMILY. Quick Start Guide WIRELESS SCANNER
Bluetooth Version FUZZYSCAN FAMILY Quick Start Guide WIRELESS SCANNER Getting Familiar with Your FuzzyScan Thank you for choosing Cino FuzzyScan Bluetooth Cordless Image Scanner. Powered by the combination
S302D. Programming Guide. 2D Imaging Barcode Scanner. Advanced Handheld High-Speed Laser Scanner
S302D 2D Imaging Barcode Scanner Programming Guide 1 Advanced Handheld High-Speed Laser Scanner Revision History Changes to the original manual are listed below: Version Date Description of Version 1.0
TMCT-10 Barcode Scanner User Manual. 102, 5661-99 St. Edmonton, AB T6E 3N8 Ph. 780.988.0215 Fax 780.988.0465
TMCT-10 Barcode Scanner User Manual 102, 5661-99 St. Edmonton, AB T6E 3N8 Ph. 780.988.0215 Fax 780.988.0465 IMPORTANT NOTICE Safety Precaution * DO NOT disassemble the scanner, or place foreign matter
Metrologic MS1690 2D Scanner Installation Guide
Metrologic MS1690 2D Scanner Installation Guide Revision 1.0 Revision History 1.0 04/17/2007 Initial Release The latest version of this document can be found in the following places: Internally for Cerner
OPR3301 USER MANUAL (OS version: RBJV0211 / Application version: RFJ35530)
CAUTION: This information is subject to change without prior notice. Copyright 2010, Opticon Sensors Europe BV, all rights reserved. This manual may not, in whole or in part, be copied, photocopied, reproduced,
METROLOGIC INSTRUMENTS, INC. Area Imaging Bar Code Supplemental Configuration Guide
METROLOGIC INSTRUMENTS, INC. Area Imaging Bar Code Supplemental Configuration Guide Copyright 2007 by Metrologic Instruments, Inc. All rights reserved. No part of this work may be reproduced, transmitted,
Important Bluetooth. and Software Considerations for Wireless Barcode Scanner Deployments
Important Bluetooth and Software Considerations for Wireless Barcode Scanner Deployments By LEN OTT, Chief Technical Officer, Socket Mobile, Inc. February 2011 Before deploying a Bluetooth barcode scanner,
Model No. CF-U1 Series
First-time Operation Supplementary Instructions for 2D Barcode Reader Personal Computer Model No. CF-U1 Series This Supplementary Instructions explains how to get started with a barcode reader and point
All brand, product and service, and trademark names are the property of their registered owners.
Copyright 2010 EQUATOR LIMITED All rights reserved. All intellectual property rights are the property of their owners. EQUATOR LIMITED is authorized the right to use the software; it is provided under
INTEGRATION GUIDE. Bluetooth Connection Instructions for CR2300/CR2600/CR3600 VERSION 03 RELEASE DATE: MARCH 2016
INTEGRATION GUIDE Bluetooth Connection Instructions for CR2300/CR2600/CR3600 VERSION 03 RELEASE DATE: MARCH 2016 Apple is a trademarks of Apple Inc., registered in the U.S. and other countries. Windows
1704 Barcode Scanner. Setup barcodes included. Version 1.08
1704 Barcode Scanner Setup barcodes included. Version 1.08 Copyright 2010~2012 CIPHERLAB CO., LTD. All rights reserved The software contains proprietary information of CIPHERLAB CO., LTD.; it is provided
Scanner Configuration
Scanner Configuration SmartScan Manual DOC Version 2.21 This document is specifically designed for the user to print two pages per sheet of paper with optimal print quality. Copyright 2005~ 2008 CIPHERLAB
SR30. Handheld Scanner. User s Guide
SR30 Handheld Scanner User s Guide Intermec Technologies Corporation Worldwide Headquarters 6001 36th Ave.W. Everett, WA 98203 U.S.A. www.intermec.com The information contained herein is provided solely
Symbol CS3000 Series Scanner Product Reference Guide
Symbol CS3000 Series Scanner Product Reference Guide Symbol CS3000 Series Scanner Product Reference Guide 72E-136088-01 July 2010 ii Symbol CS3000 Series Scanner Product Reference Guide 2010 by Motorola,
Laser Scanner Programming Guide (SE923 laser engine)
Laser Scanner Programming Guide (SE923 laser engine) CONTENT Technical note... 5 How to recognise the type of the laser barcode engine... 5 How to program the laser barcode reader into default value...
Symbol CS3000 Series Scanner Product Reference Guide
Symbol CS3000 Series Scanner Product Reference Guide Symbol CS3000 Series Scanner Product Reference Guide 72E-136088-02 October 2010 ii Symbol CS3000 Series Scanner Product Reference Guide 2010 by Motorola,
CS3000 SERIES SCANNER PRODUCT REFERENCE GUIDE
CS3000 SERIES SCANNER PRODUCT REFERENCE GUIDE CS3000 SERIES SCANNER PRODUCT REFERENCE GUIDE 72E-136088-04 Revision A February 2013 ii CS3000 Series Scanner Product Reference Guide 2013 Motorola Solutions,
Wireless Laser Barcode Scanner ils 6300BU. User s Manual
Wireless Laser Barcode Scanner ils 6300BU User s Manual FCC Compliance This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.
M Series Quick Start Guide
M Series Quick Start Guide Thanks for you use Generalscan all series barocde scanner product! Please be sure to read this quick start guide before you use our product in first time. Optimal Scanning Distance
Connecting a Metrologic MS9535 to a USB BT Adapter (Client Mode)
Connecting a Metrologic MS9535 to a USB BT Adapter (Client Mode) I. Scope This document will provide a brief description of how to connect the Metrologic MS9535-5 scanner to a USB Bluetooth Adapter in
User s Manual. SR61 Cordless Scanner
User s Manual SR61 Cordless Scanner Intermec Technologies Corporation Worldwide Headquarters 6001 36th Ave.W. Everett, WA 98203 U.S.A. www.intermec.com The information contained herein is provided solely
Operating Manual BCSi-1 *
Operating Manual BCSi-1 * Barcode scanner Doc.Nr.:60000340 MANUAL BCSI-1 REV 1.8 EN.DOC 19.12.08 A.J. - 1 - List of Contents List of Contents...2 Introduction...3 BCSi-1 * models available...4 Technical
Integrated Scanner Programming Guide
Integrated Scanner Programming Guide E-SW-SCANNERPG-N 2010 Copyright by LXE, Inc, An EMS Technologies Company. All Rights Reserved. Notices LXE Inc. reserves the right to make improvements or changes to
Laser Barcode Scanner
Laser Barcode Scanner User s Manual FCC Compliance This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are
ScanMaster for Scanner Configuration
ScanMaster for Scanner Configuration For 1 Series Barcode Scanners: 1070, 1500, 1502 (1D, tethered) 1560, 1562, 1660, 1661 (1D, cordless) 1504, 1704 (2D, tethered) 1564, 1664 (2D, cordless) Version 1.30
Configuration app and Bluetooth interface
Page 1 of 5 Configuration app and Bluetooth interface Note, this manual is continuously updated. Check www.mollehem.se/doc/instruktion/instruktion_programmering_en.pdf for the latest version. 1 Bluetooth
PAIRING THE LI4278 TO A TABLET INSTRUCTION GUIDE
PAIRING THE LI4278 TO A TABLET INSTRUCTION GUIDE TECHNOLOGY SHOULD WORK TOGETHER. In an effort to increase productivity and improve efficiencies, businesses continue to adopt consumer products for use
CipherConnect is ready for purchase and downloadable via the Windows Marketplace for Mobile. Go on-line and browse the market for the applications:
Prior to Use of Download to Windows Mobile Phones is a COM-to-key utility designed for CipherLab cordless scanners (156x and 166x) to work as an input device for the Windows Mobile phone, enabling intensive
BIXOLON Sales Guide INTELLIGENT & COMPACT SLP-TX420. 4 inch Thermal Transfer / Direct Thermal Barcode Label Printer. SG_SLP-TX420_EN_Mar14
BIXOLON Sales Guide INTELLIGENT & COMPACT SLP-TX420 4 inch Thermal Transfer / Direct Thermal Barcode Label Printer BIXOLON Sales Guide Overview Targets Specifications Comparison Overview A. Premium-level
HP Point of Sale (POS) Peripherals Configuration Guide 2D Imaging / Linear / Presentation Scanner
HP Point of Sale (POS) Peripherals Configuration Guide 2D Imaging / Linear / Presentation Scanner Document Version 3.42 December 2011 1 Copyright 2007-2011 Hewlett-Packard Development Company, L.P. The
How to connect your D210 using Bluetooth. How to connect your D210 using GPRS (SIM Card)
D210 En User Guide Content 3 Introduction 3 Scope 3 Related Documentation 4 Internet Connectivity 4 Using D210 with Mobile Phone 5 Using D210 with wireless (Wi-Fi) router 6 Using D210 with GPRS (requires
Laser Barcode Scanner User s Manual
Laser Barcode Scanner User s Manual FCC Compliance This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are
FBAScan for Android (Version 5.8)
FBAScan for Android (Version 5.8) Table of Contents Chapter 1 Setup... 1 Chapter 2 Number/Title Entry... 2 Chapter 3 Operation... 2 Chapter 4 Menu... 8 Chapter 5 SerialMagic Gears...17 Chapter 6 TeamViewer
Grid-In-Hand Mobile Grid Revised 1/27/15
Grid-In-Hand Mobile Grid Revised 1/27/15 Grid-In-Hand provides a mobile solution framework by coupling your mobile scanner to your ios or Android device. Use Mobile Grid for inventory, asset management,
Allen-Bradley. Bar Code. 2-D Hand-Held. Programming Guide. Bar Code. Scanners. (Cat. No. 2755-HTG-4)
Allen-Bradley 2-D Hand-Held Bar Code Scanners Bar Code Programming Guide (Cat. No. 2755-HTG-4) Important User Information The illustrations, charts, sample programs and layout examples shown in this guide
BCST-20 Barcode Scanner. Instruction Manual. www.inateck.com
BCST-20 Barcode Scanner Instruction Manual www.inateck.com IMPORTANT NOTICE Safety Precaution * DO NOT disassemble the scanner, or place foreign matter into the scanner causing a short circuit or circuit
Baracoda RoadRunners. User Guide. This document is to be used with the Baracoda RoadRunners. Baracoda RoadRunners
User Guide Baracoda RoadRunners This document is to be used with the Baracoda RoadRunners Baracoda RoadRunners Package contents Check that you have the following items. Contact your reseller if any item
How to connect your D200 using Bluetooth. How to connect your D200 using GPRS (SIM Card)
D200 En User Guide Content 3 Introduction 3 Scope 3 Related Documentation 4 Internet Connectivity 4 Using D200 with Mobile Phone 5 Using D200 with wireless (Wi-Fi) router 6 Using D200 with GPRS (requires
1166 / 1266 Barcode Scanner
1166 / 1266 Barcode Scanner Setup barcodes included. Version 3.03 Copyright 2005~2014 CIPHERLAB CO., LTD. All rights reserved The software contains proprietary information of CIPHERLAB CO., LTD.; it is
SalesPad Mobile Usage Guide. Contents. A software product created by SalesPad Solutions Copyright 2004-2012 www.salespad.net
SalesPad Mobile Usage Guide A software product created by SalesPad Solutions Copyright 2004-2012 www.salespad.net Contents SalesPad Mobile... 1 Usage Guide... 1 Overview... 4 Installation... 4 Android...
Code Reader 2500 Manual Version 7 Release Date: January 2011. User Manual. Save Settings C004386_07_CR2500_usermanual
User Manual C004386_07_CR2500_usermanual Code Reader 2500 Manual Version 7 Release Date: January 2011 C004386_07_CR2500_ User_Manual - 1 Statement of Agency Compliance The Code Reader 2500 has been tested
METROLOGIC INSTRUMENTS, INC. MetroSelect Configuration Guide
METROLOGIC INSTRUMENTS, INC. MetroSelect Configuration Guide Copyright 2005 by Metrologic Instruments, Inc. All rights reserved. No part of this work may be reproduced, transmitted, or stored in any form
Barcode Scanner User Manual V6.6.2
Barcode Scanner User Manual V6.6.2 CONTENTS.......................................................................................... 1 1 2 2 3 4 13 14 15 17 17 19 19 20 22 23 23 28 29 33 42 60 65 85 87
MK-5200 2D Imager Barcode Scanner Configuration Guide
MK-5200 2D Imager Barcode Scanner Configuration Guide V 1.2 Programming the Engine Code Programming On/Off Read the barcode to activate Code Programming function. One or more Code Programming barcodes
QuickScan Mobile. Reference Manual
QuickScan Mobile Reference Manual Datalogic Scanning, Inc. 959 Terry Street Eugene, Oregon 97402 USA Telephone: (541) 683-5700 Fax: (541) 345-7140 An Unpublished Work - All rights reserved. No part of
Register your product and get support at www.philips.com/dictation DPM8500. Barcode scanner configuration guide
Register your product and get support at www.philips.com/dictation DPM8500 Barcode scanner configuration guide Table of contents 1 Introduction 5 Operational Parameters 5 Parameter defaults 5 2 Set default
Tutorial 8: Setting Up a Barcode Scanner
Tutorial 8: Setting Up a Barcode Scanner This tutorial explains how to use a barcode scanner with PranaStudio. PranaStudio allows you to use a scanner on your products and to assign a barcode to a student.
BARCODE READER V 2.1 EN USER MANUAL
BARCODE READER V 2.1 EN USER MANUAL INSTALLATION OF YOUR DEVICE PS-2 Connection RS-232 Connection (need 5Volts power supply) 1 INSTALLATION OF YOUR DEVICE USB Connection 2 USING THIS MANUAL TO SETUP YOUR
1560/1562 Barcode Scanner
1560/1562 Barcode Scanner Setup barcodes included. Version 1.13 Copyright 2009~2014 CIPHERLAB CO., LTD. All rights reserved The software contains proprietary information of CIPHERLAB CO., LTD.; it is provided
Gryphon I GD44XX/GBT4400 General Purpose Handheld Area Imager Bar Code Reader
Gryphon I GD44XX/GBT4400 General Purpose Handheld Area Imager Bar Code Reader Product Reference Guide Datalogic Scanning, Inc. 959 Terry Street Eugene, Oregon 97402 USA Telephone: (541) 683-5700 Fax: (541)
Mobility with Eye-Fi Scanning Guide
Mobility with Eye-Fi Scanning Guide Scan and Transfer Images Wirelessly with Eye-Fi This document is to be used in addition to the scanner s user guide located on the installation disc. The instructions
NLS-FR20 Series Fixed Mount Barcode Scanner. User Guide
NLS-FR20 Series Fixed Mount Barcode Scanner User Guide Disclaimer 2015 Fujian Newland Auto-ID Tech. Co., Ltd. All rights reserved. Please read through the manual carefully before using the product and
Voyager 1202g BF. Quick Start Guide. Cordless Single-Line Laser Bar Code Scanner and CCB00-010BT-01N-BF base
Voyager 1202g BF Cordless Single-Line Laser Bar Code Scanner and CCB00-010BT-01N-BF base Quick Start Guide Aller à www.honeywellaidc.com pour le français. Vai a www.honeywellaidc.com per l'italiano. Gehe
Programming Reference Guide HP USB Barcode Scanner
Programming Reference Guide HP USB Barcode Scanner Document Part Number: 430944-002 August 2006 Print this document before setting up the HP USB Barcode Scanner. The document provides the programming bar
Barcodes principle. Identification systems (IDFS) Department of Control and Telematics Faculty of Transportation Sciences, CTU in Prague
Barcodes principle Identification systems (IDFS) Department of Control and Telematics Faculty of Transportation Sciences, CTU in Prague Contents How does it work? Bulls eye code PostNet 1D Bar code 2D
LINĒA-PRO 4 iphone /ipod Touch 1D/2D SCANNER LINĒA-PRO 4 USER MANUAL
LINĒA-PRO 4 iphone /ipod Touch 1D/2D SCANNER LINĒA-PRO 4 CONTACT INFORMATION National Sales Headquarters: Infinite Peripherals, Inc. 1124 Main Street Suite B Irvine, CA 92614 Toll Free: (866) 278-7860
May 2001. Prepared: Product version: Keyword: Accelio Present Central 5.4. Original value:
: Page 1 : : ANSI/AIM BC2-1995, Uniform Symbology Specification - Interleaved 2 of 5 0 2 of 5 Industrial Interleaved 2 of 5 (also called I-2/5 and ITF) is suitable for encoding general purpose all-numeric
USER'S GUIDE NUSCAN 2100 Series
BARCODE SCANNER USER'S GUIDE NUSCAN 2100 Series Table of Contents 1. Limited Warranty...1 2. Introduction...2 3. Contents...3 4. Barcode Symbologies...3 5. Product Introduction...3 6. Installation...4
Z-1170BT V2 ( Version 1.01) User s Manual
Pocket Sized Data Collector Z-1170BT V2 ( Version 1.01) User s Manual ZEBEX INDUSTRIES INC. WWW.ZEBEX.COM ZEBEX INDUSTRIES INC. Revision History Changes to the original manual are listed below: Version
QUICK START GUIDE. Wasp WLS 9500. www.waspbarcode.com
QUICK START GUIDE Wasp WLS 9500 www.waspbarcode.com LED Scan Window Beeper Trigger CORD ATTACHMENT Model Number and Serial Number appear here. Cable interface Interface cable modular connector Interface
QuickScan i. QD2100 Barcode Imager. Product Reference Guide
QuickScan i QD2100 Barcode Imager Product Reference Guide Configuring the Interface KEYBOARD FEATURES AT, PS/2 25-286, 30-286, 50, 50Z, 60, 70, 80, 90 & 95 w/standard Key Encoding Select KBD-AT Keyboard
Enhanced Bar Code Engine
Enhanced Bar Code Engine Introduction Access to the Kofax Standard bar code recognition engine is provided through ImageControls-based applications and ISIS-based applications. In addition to the standard
MobileMerchant Application Guide
MobileMerchant Application Guide United Kingdom Ireland Version 6 Android: Google Play is a trademark of Google Inc. Apple: Apple, the Apple logo, iphone and ipad are trademarks of Apple Inc., registered
Copyright 2010. All rights reserved. No warranty of any kind is made in regard to this material, including, but not limited to, implied warranties of
Copyright 2010. All rights reserved. No warranty of any kind is made in regard to this material, including, but not limited to, implied warranties of merchantability or fitness for a particular purpose.
FREQUENTLY ASKED QUESTIONS
Tip for use of FAQ: Click on questions to go to answer. GETTING STARTED... 2 Which hearing devices do I need to use the app?... 2 Why do I need the ReSound Unite Phone Clip+ to use the app?... 2 I have
All V7 registers support barcode printing, except the Sharp 410/420 1A ROM and that limitation is based upon the register.
Tools Section Barcode Printing These are basic instructions for Version 7 Polling barcode printing. Users will need to have a PLU/UPC file containing either UPC-A, UPC-E, EAN 13 or EAN 8 numbers, label
iloq P10S.10/20 Programming device User's Guide
iloq P10S.10/20 Programming device User's Guide CONTENTS CONTENTS... 2 GENERAL... 3 USING THE PROGRAMMING DEVICE... 5 Starting the programming device... 5 Programming of locks... 5 Programming of keys...
DUET / VS800 Scanner. DUET Scanner VS800 Scanner. Programming Kit
DUET / VS800 Scanner DUET Scanner VS800 Scanner Programming Kit PSC Scanning, Inc. 959 Terry Street Eugene, Oregon 97402 Telephone: (541) 683-5700 Telefax: (541) 345-7140 PSC and the PSC logo are registered
Voyager 9520/40 Voyager GS9590 Eclipse 5145
Voyager 9520/40 Voyager GS9590 Eclipse 5145 Quick Start Guide Aller à www.honeywellaidc.com pour le français. Vai a www.honeywellaidc.com per l'italiano. Gehe zu www.honeywellaidc.com für Deutsch. Ir a
Mobile Print/Scan Guide for Brother iprint&scan
Mobile Print/Scan Guide for Brother iprint&scan Version K ENG Definitions of notes We use the following note style throughout this user s guide: specifies the operating environment, conditions for installation,
Madi, The Little Paper Pantry
Madi, The Little Paper Pantry In this guide: Getting started Applying for PayPal Here Logging in to the app Setting up your business profile Setting up an item list Your card reader Your card reader Your
METROLOGIC INSTRUMENTS, INC. MS1690 Focus Area Imaging Bar Code Scanner Supplemental Configuration Guide
METROLOGIC INSTRUMENTS, INC. MS1690 Focus Area Imaging Bar Code Scanner Supplemental Configuration Guide Copyright 2005 by Metrologic Instruments, Inc. All rights reserved. No part of this work may be
BI-300. Barcode configuration and commands Manual
BI-300 Barcode configuration and commands Manual 1. Introduction This instruction manual is designed to set-up bar code scanner particularly to optimize the function of BI-300 bar code scanner. Terminal
Tecla for Android. Downloading and Installing the Tecla Access App. Activating and Selecting the Tecla Access Keyboard
Tecla for Android Downloading and Installing the Tecla Access App Activating and Selecting the Tecla Access Keyboard Connecting the App to the Tecla Shield Connecting Switches Controlling the Android User
Field Manager Mobile Worker User Guide for RIM BlackBerry 1
Vodafone Field Manager Mobile Worker User Guide for RIM BlackBerry APPLICATION REQUIREMENTS Supported devices listed here o http://support.vodafonefieldmanager.com Application requires 600 KB of application
Gryphon 2D Family General Purpose Handheld Area Imager Bar Code Reader Gryphon I GD44XX/GBT4400/GM440X
Gryphon 2D Family General Purpose Handheld Area Imager Bar Code Reader Gryphon I GD44XX/GBT4400/GM440X Product Reference Guide Datalogic Scanning, Inc. 959 Terry Street Eugene, Oregon 97402 USA Telephone:
MIRROR VT/5250 Terminal Emulation
MIRROR VT/5250 Terminal Emulation 9300 / 9400 / 9500CE / 9600 Series Mobile Computers DOC Version 1.12 Copyright 2007~ 2009 CIPHERLAB CO., LTD. All rights reserved The software contains proprietary information
Installer and Admin App Guide
CONTENTS EC ))) KEY ))) CONVENIENT SECURITY. YOUR PHONE IS YOUR KEY. 1. Prerequisites... 1 2. Basics of the ECKey Installer and Admin App. 1 3. Connecting to an ECKey Reader.. 2 4. Configuring the ECKey
Wi-Fi Barcode Scanner
Wireless Wi-Fi Barcode Scanner A world-class Wi-Fi barcode scanner for enterprise WLAN connectivity Thanks to the convergence of the cutting-edge FuzzyScan 2.0 Imaging Technology and IEEE 802.11 wireless
HT580 User Reference Guide. Version 1.0
Version 1.0 NOTICE 1. Li-Ion Battery Pack The HT580 Portable Terminal and the Li-Ion Battery Pack are packaged separately. You will have to install the Battery Pack when you receive your terminal. Please
PowerScan 7000 2D Imager
PowerScan 7000 2D Imager Product Reference Guide Datalogic Scanning, Inc. 959 Terry Street Eugene, Oregon 97402 Telephone: (541) 683-5700 Fax: (541) 345-7140 An Unpublished Work - All rights reserved.
Index...1. Introduction...3. Installation- Keyboard Wedge...3 RS-232...3 USB...3. Default Setting for each barcode shown as below:...
Index Index...1 Introduction...3 Installation- Keyboard Wedge...3 RS-232...3 USB...3 Default Setting for each barcode shown as below:...4 Programming the MS320...5 Interface Selection...7 Keyboard wedge...8
Barcode Scanning Made Easy. WWS500 Programming Guide
Barcode Scanning Made Easy WWS500 Programming Guide Table of Contents Chapter 1. Introduction...........................2 Chapter 2. Barcode Symbologies...................3 Chapter 3. Quick Start............................4
METROLOGIC INSTRUMENTS INC. MetroSelect Single-Line Configuration Guide
METROLOGIC INSTRUMENTS INC. MetroSelect Single-Line Configuration Guide Copyright 2005 by Metrologic Instruments, Inc. All rights reserved. No part of this work may be reproduced, transmitted, or stored
Scanner Wedge for Windows Software User Guide
Scanner Wedge for Windows Software User Guide Contents INSTALLING THE SCANNER WEDGE SOFTWARE 2 ACTIVATING THE SCANNER CONNECTION 3 TRACING SCANNER OUTPUT 7 FORMATTING OUTPUT 9 SELECTING START-UP OPTIONS
Create!form Barcodes. User Guide
Create!form Barcodes User Guide Barcodes User Guide Version 6.3 Copyright Bottomline Technologies, Inc. 2008. All Rights Reserved Printed in the United States of America Information in this document is
Application Note. Connecting the TracKing-1 using Bluetooth
Application Note Connecting the TracKing-1 using Bluetooth This Application note describes how to establish a Bluetooth connection between the TracKing-1 and various devices. It also explains the various
VersaScan II. Barcode Scanner Quick Start Manual. ID TECH 10721 Walker Street Cypress, CA 90630 (714) 761-6368 www.idtechproducts.
VersaScan II TM Barcode Scanner Quick Start Manual ID TECH 10721 Walker Street Cypress, CA 90630 (714) 761-6368 www.idtechproducts.com 80105501-001 rev.a FCC WARNING STATEMENT This equipment has been tested
Xi2000 Series Configuration Guide
U.S. Default Settings Sequence Reset Scanner Xi2000 Series Configuration Guide Auto-Sense Mode ON UPC-A Convert to EAN-13 OFF UPC-E Lead Zero ON Save Changes POS-X, Inc. 2130 Grant St. Bellingham, WA 98225