Curriculum Vitae of Dr. Carmine Abbate, Ph.D.
|
|
|
- Wesley May
- 7 years ago
- Views:
Transcription
1 Curriculum Vitae of Dr. Carmine Abbate, Ph.D. Identity Name: Carmine Surname: Abbate Date of birth: July 5, 1976 Nationality: Italian Country of residence: Italy Contact Details Office: Mobile: Qualifications - Philosophiae Doctor in Electrical and Information Engineering from the University of Cassino, Italy, in February 2006, with a thesis on Electromagnetic Interference generated by power IGBT modules in high power converter circuits. - Degree in Telecommunication Engineering, 110/110, from the University of Cassino, Italy, in January 2002 with a thesis on Smart antennas for Wireless Local Loop. Career - Post degree research contract at University of Cassino, Italy, on Analysis and characterization of IGBT modules for railway applications operating at the edge of the safe operating area, in HIMRATE project, 2002 to 2003; - Ph.D. course at University of Cassino, 2003 to 2006; - Research contract at University of Cassino on Test and development of experimental set ups for power device characterization at low and high temperatures and Series connection of high power IGBT modules in INTERMOD project 2007 to 2008; - Research contract at University of Cassino on Cosmic Rays Effects on power devices for innovative switching converter for space applications, 2007 to 2009; - Temporary researcher at University of Cassino, Italy, from 2010 to Teaching activities - From 2003 to date: teachings of Laboratory of Electronics, Electronic for Telecommunications, Electronics of Digital Communications and Electronics for Telematics at degree and master degree in Electrical Engineering, Information Engineering and Telecommunications Engineering, respectively, at the University of Cassino; - Thesis supervisor and co-supervisor of over 40 thesis in Electronic Engineering, Electrical Engineering and Telecommunications Engineering on topics related to research topics of interest.
2 Funded research projects DAEIMI, University of Cassino, and the company Ansaldobreda Spa under the Fourth Framework Program. Project title: "HIMRATE" ( ); DAEIMI, University of Cassino, and the Italian Space Agency entitled "Switching Converters with high efficiency and innovative power devices for space applications" ( ) ; DAEIMI, University of Cassino, and the company Ansaldobreda Spa under the P.O.N.(L.593/2000). Project title: "TEINTRE" ( ); DAEIMI, University of Cassino, and the company Ansaldobreda Spa, entitled "Studies and qualifications of Presspack IGBT modules and high-voltage isolation", , included into the Ministry project named "INTERMOD". Main Collaborations - ECPE (European Centre for Power Electronics); - Ansaldobreda Spa.; - ST Microelectronics; - Fairchild Semiconductor; - INFN (Istituto Nazionale di Fisica Nucleare) - Fermilab, Chicago Peer-reviewed publications - Author of 23 publications in international journals and 24 international conference proceedings; - Co-author of one invited contribution; - Author of an international patent. Research activities 1. Study of reliability and non destructive characterization of power devices in extreme operating conditions (overload, short circuit, over temperature, very low temperature); 2. Study of mechanisms of instability of power electronic devices in critical conditions (2 nd Breakdown, latch-up, avalanche condition) and drafting of related forecasting models; 3. Design and development of power converters, power pulse generators, and non destructive testers for power devices; 4. Study, simulation and optimization of new circuit topologies for series connection of power IGBT modules. Study about the optimization of IGBT commutation. EMI analysis and modeling in high power devices;
3 5. Programmable digital hardware for the innovative control of power electronic converters and custom non-destructive power device testing. Publication list Papers on international journals 1. G. Busatto, L. Fratelli, C. Abbate, R. Manzo, F. Iannuzzo: Analysis and Optimisation through Innovative Driving Strategies of High Power IGBT Performances/EMI Reduction Trade-off for Converter Systems in Railway Applications Microelectronics Reliability, Vol. 44, 2004, pp C. Abbate, G. Busatto, L. Fratelli, F. Iannuzzo: The High Frequency Behavior of High Voltage and Current IGBT Modules, Microelectronics Reliability, Vol.46, 2006, pp F. Iannuzzo, G. Busatto, C. Abbate: Investigation of MOSFET failure in soft-switching conditions, Microelectronics Reliability, Vol.46, 2006, pp C. Abbate, G. Busatto, L. Fratelli, F. Iannuzzo, B. Cascone, R. Manzo: The Robustness of Series Connected High Power IGBT Modules, Microelectronics Reliability, Vol. 47, 2007, pp G. Busatto, C. Abbate, B. Abbate, F. Iannuzzo: IGBT Modules Robustness During Turn-Off Commutation, Microelectronics Reliability, Vol 48, 2008, pp G. Busatto, C. Abbate, F. Iannuzzo, P. Cristofaro: Instable Mechanisms During Unclamped Operation of High Power IGBT Modules, Microelectronics Reliability, Vol 49, 2009, pp C. Abbate, G. Busatto, F. Iannuzzo: High Voltage, High Performance Switch using Series Connected IGBTs, Power Electronics, IEEE Transactions on Volume: 25, Issue: 9 Digital Object Identifier: /TPEL Publication Year: 2010, pp C. Ronsisvalle, V. Enea, C. Abbate, G. Busatto, A. Sanseverino: Perspective Performances of MOS-Gated GTO in High-Power Applications, IEEE Trans. Electron Devices, Vol. ED- 57, p , September C. Abbate, G. Busatto, F. Iannuzzo, IGBT RBSOA non-destructive testing methods: Analysis and discussion, Microelectronics Reliability, Volume 50, Issues 9-11, September-November 2010, Pages , ISSN , DOI: /j.microrel C. Abbate, G. Busatto, F. Iannuzzo, "Operation of SiC normally-off JFET at the edges of its safe operating area", Microelectronics Reliability, Volume 51, Issues 9-11, September-November 2011, Pages , ISSN , DOI: /j.microrel C. Abbate, G. Busatto, F. Iannuzzo, Unclamped repetitive stress on 1200 V normallyoff SiC JFETs, Microelectronics Reliability, Volume 52, Issues 9 10, September
4 October 2012, Pages , ISSN , DOI: /j.microrel C. Abbate, M. Alderighi, S. Baccaro, G. Busatto, M. Citterio, P. Cova, N. Belmonte, V. De Luca, S. Fiore, S. Gerardin, E. Ghisolfi, F. Giuliani, F. Iannuzzo, A. Lanza, S. Latorre, M. Lazzaroni, G. Meneghesso, A. Paccagnella, F. Rampazzo, M. Riva, A. Sanseverino, R. Silvestri, G. Spiazzi,F. Velardi, E. Zanoni, Developments on DC/DC converters for the LHC experiment upgrades, Journal of Instrumentation 9 (02), C02017, C. Abbate, G. Busatto, F. Iannuzzo, C. Ronsisvalle, A. Sanseverino, F. Velardi, Scattering parameter approach applied to the stability analysis of power IGBTs in Short Circuit Microelectronics Reliability Vol.53, Issue9-11, 2013, pp C. Abbate, G. Busatto, F. Iannuzzo, Thermal Instability during Short Circuit of Normally-Off AlGaN/GaN HFETs Microelectronics Reliability Vol.53, Issue9-11, F. Iannuzzo, G. Busatto, C. Abbate, Instabilities in Silicon Power Devices: A Review of Failure Mechanisms in Modern Power Devices, IEEE Industrial Electronics Magazine, 2014, IEEE 8 (3), pp C. Abbate, G. Busatto, P. Cova, N. Delmonte, F. Giuliani, F. Iannuzzo, A. Sanseverino, F. Velardi, Thermal damage in SiC Schottky diodes induced by SE heavy ions, Microelectronics Reliability 54 (9), pp , C. Abbate, F. Iannuzzo, G. Busatto, A. Sanseverino, F. Velardi, C. Ronsisvalle, J Victory, Turn-off instabilities in large area IGBTs, Microelectronics Reliability 54 (9), pp , C. Abbate, R. Di Folco, High Frequency Behavior of High Power IGBT Modules, Universal Journal of Electrical and Electronic Engineering, 3, doi: /ujeee , C. Abbate, R. Di Folco, A. Evangelista, Multi-baseline SAR Interferometry using Elaboration of Amplitude and Phase Data. Universal Journal of Electrical and Electronic Engineering, 3, , 2015, doi: /ujeee C. Abbate, R. Di Folco, Modelling and Analysis of EMI Generated of Power IGBT Modules. Universal Journal of Electrical and Electronic Engineering, 3, 49 54, 2015,. doi: /ujeee C. Abbate, G. Busatto, P. Cova, N. Delmonte, F. Giuliani, F. Iannuzzo, A. Sanseverino, F. Velardi: Analysis of heavy ion irradiation induced thermal damage in SiC Schottky diodes, Transaction on Nuclear Science, , C. Abbate, G. Busatto, F. Iannuzzo, S. Mattiazzo, A. Sanseverino L. Silvestrin, D. Tedesco, F. Velardi: Experimental Study of Single Event Effects Induced by Heavy Ion Irradiation in Enhancement Mode GaN Power HEMT in fase di pubblicazione su Microelectronics Reliability C. Abbate, G. Busatto, A. Sanseverino, F. Velardi, C. Ronsisvalle: Analysis of Low and High Frequency Oscillations in IGBTs during Turn on Short Circuit Trans. on Electron Devices, pp , 2015, DOI: /TED
5 Contributions to international conferences 24. G. Busatto, C. Abbate, B. Cascone, R. Manzo, L. Fratelli, G. Giannini, F. Iannuzzo, F. Velardi; Characterisation of high-voltage IGBT modules at high temperature and high currents, The Fifth International Conference on Power Electronics and Drive Systems, PEDS Volume: 2, pp , November R. Manzo, G. Busatto, L. Fratelli, G. Giannini, R. Nisci, C. Abbate, Optimization of High-Voltage IGBT Modules Turn-on on Inductive Load Proc. 10th European Conference on Power Electronics and Applications, EPE 2003, September C. Abbate, R. Manzo, F. Iannuzzo, B. Cascone, G. Busatto, G. Giannini, Driving optimization of high voltage IGBT modules for traction application SPEEDAM 2004, Capri (Italy), June 16-18, C. Abbate, G. Busatto, R. Manzo, L. Fratelli, B. Cascone, G. Giannini, F. Iannuzzo, Experimental Optimisation of high power IGBT Modules Performances Working at the Edges of their Safe Operating Area Proc. IEEE Power Electronics Specialist Conference, PESC 2004, pp , June, G. Busatto, C. Abbate, F. Iannuzzo, L. Fratelli, B. Cascone, G. Giannini: EMI Characterisation of high power IGBT modules For Traction Application Power Electronics Specialists Conference, 2005, PESC 05, Record 36th, pp , Recife Brazil, June C. Abbate, G. Busatto, L. Fratelli, F. Iannuzzo: The Role of IGBT Module in Electromagnetic Noise Emission of Power Converters ESREF 05, October 2005, Arcachon, Francia. 30. G. Busatto, C. Abbate, L. Fratelli, F. Iannuzzo, G. Giannini, B. Cascone: EMI Analysis in High power Converters for Traction Application EPE 2005, September 2005, Dresden, Germany, ISBN: C. Abbate, G. Busatto, L. Fratelli, F. Iannuzzo, B. Cascone, G. Giannini: Series Connection of High Power IGBT modules for traction applications EPE 2005, September 2005, Dresden, Germania, ISBN: C. Abbate, G. Busatto, L. Fratelli, F. Iannuzzo: Experimental - Simulative procedure to Predict the EMI Generated in High Power Converters based on IGBT modules, CIPS 2006, pp , Naples, Italy. 33. C. Abbate, G. Busatto, F. Iannuzzo, L. Fratelli: Experimental Characterisation of High Efficiency Resonant Gate Driver Circuit, EPE 2007, 2-5 September 2007, Aalborg, Denmark, pp. 1-8, digital object: /EPE C. Abbate, M. Morozov, G. Rubinacci, A. Tamburrino, S. Ventre: A probe array for fast quantitative eddy current imaging, in E NDE, Electromagnetic Non-destructive Evaluation (X), S. Takahashi and H. Kikuchi (Eds.), pp , IOS Press, G. Busatto, C. Abbate, B. Abbate, F. Iannuzzo: Non-Destructive Experimental Investigation about RBSOA in High Power IGBT Modules, CIPS 2008, March, 2008, Nuremberg, Germany.
6 36. G. Busatto, C. Abbate, F. Iannuzzo, B. Abbate, L. Fratelli, B. Cascone, R. Manzo: High Voltage, High Performance Switch using Series Connected IGBTs, PESC2008, June 2008, Rhodes, Greece, pp C. Abbate, G. Busatto, F. Iannuzzo: The Effects of the Stray Elements on the Failure of Parallel Connected IGBTs during Turn-Off, EPE2009, 8-10 September 2009, Barcelona, Spain, pp 1-9, ISBN: C. Ronsisvalle, V. Enea, C. Abbate, G. Busatto, A. Sanseverino: Performances of MOS-Gated GTO in High Voltage Power Applications, EPE2009, 8-10 September 2009, Barcelona, Spain, pp. 1-8, ISBN: C. Ronsisvalle, V. Enea, C. Abbate, G. Busatto, A. Sanseverino: MOS-Gated GTO: a new functionally integrated device suitable for high voltage power applications, CIPS2010, March 2010, Nuremberg. 40. C. Abbate, G. Busatto, F. Iannuzzo, C. Pagliarone, G.M. Piacentino, F. Bedeschi, Comparison among eligible topologies for MARX klystron modulators, Proc. 1st International Particle Accelerator Conference, IPAC 10, pp , Kyoto Japan (ISBN ). 41. C. Abbate, G. Busatto, A. Sanseverino, F. Velardi, C. Ronsisvalle, H. Fischer, K.S. Park: High Frequency Capacitive behavior of field stop trench gate IGBTs operating in Short Circuit, Proc. of Applied Power Electronics Conference, pp , 2013, DOI: / APEC C. Abbate, G. Busatto, A. Sanseverino, C. Ronsisvalle,Experimental and Numerical Study of Low and High Frequency Oscillations in IGBTs during Short Circuit, PCIM 2014, Nuremberg. 43. S. Fiore, C. Abbate, S. Baccaro, G. Busatto,M. Citterio, F. Iannuzzo, A. Lanza, S. Latorre, M. Lazzaroni, A. Sanseverino, F. Velardi Radiation and magnetic field effects on new semiconductor power devices for HL-LHC experiments, 14th ICAPTT Conference on Astroparticle, Particle, Space Physics and Detectors for Physics and Applications, Villa Olmo (Como-Italia) September C. Abbate, M. Alderighi, S. Baccaro, G. Busatto, M.Citterio, P. Cova, N. Delmonte, V. De Luca, S. Fiore, S. Gerardin, E. Ghisolfi, F. Giuliani, F. Iannuzzo, A. Lanza, S. Latorre, M. Lazzaroni, G. Meneghesso, A. Paccagnella, F. Rampazzo, M.Riva, A. Sanseverino, R. Silvestri, G. Spiazzi,F. Velardi, E. Zanoni, Radiation performance of new semiconductor power devices for the LHC experiment upgrades, 11th International Conference on Large Scale Applications and Radiation Hardness of Semiconductor Detectors, RD13, 3-5 July C. Abbate, G. Busatto, A. Sanseverino, C. Ronsisvalle, Experimental and Numerical Study of Low and High Frequency Oscillations in IGBTs during Short Circuit, PCIM Europe 2014; International Exhibition and Conference for Power, pp. 1 8, N. Bonora, A. Ruggiero, G. Iannitti, C. Abbate, F. Iannuzzo, G. Busatto, Mechanoluminescence of nylon under high velocity impact, Journal of Physics: Conference Series 500 (18), , C. Abbate, S. Baccaro, G. Busatto, M. Citterio, P. Cova, N. Delmonte, V. De Luca, S. Fiore, F. Giuliani, F. Iannuzzo, A. Lanza, S. Latorre, M. Lazzaroni, A. Sanseverino, G.
7 Spiazzi, F. Velardi, Testing integrated COTS DC/DC converters in hostile environment, Common ATLAS CMS electronics workshop for LHC upgrades: ACES, C. Abbate, R. Di Folco, I. De Bellis and Z. Varga, Stability Analysis of IGBT based on Simulation and Measurement of Scatter Parameters, Mechanical Engineering Letters, Vol. 13 (2015), Invited contributions 49. G. Busatto, C. Abbate, F. Iannuzzo, Non Destructive SOA Testing of Power Modules (Invited paper), 6th International Conference on Integrated Power Electronics Systems, CIPS 2010, Nuremberg, Germany, March International Patents 50. WO A3: Method for Driving Inverters, and Inverter Adapted to Reduce Switching Losses.
Curriculum Vitae of Dr. Francesco Iannuzzo, Ph.D. Associate Professor in Electronic Engineering
Curriculum Vitae of Dr. Francesco Iannuzzo, Ph.D. Associate Professor in Electronic Engineering Identity Name: Francesco Surname: Iannuzzo Date of birth: October 15, 1972 Nationality: Italian Country of
Design and Simulation of Soft Switched Converter Fed DC Servo Drive
International Journal of Soft Computing and Engineering (IJSCE) ISSN: 2231-237, Volume-1, Issue-5, November 211 Design and Simulation of Soft Switched Converter Fed DC Servo Drive Bal Mukund Sharma, A.
Silicon Carbide market update: From discrete devices to modules
PCIM EUROPE 2014 20th 22nd May 2014 Nuremberg Silicon Carbide market update: From discrete devices to modules Dr. Kamel Madjour, Technology & Market Analyst, Yole Développement 2014 www.yole.fr May 21th
3.3 kv IGBT Modules. Takeharu Koga Yasuhiko Arita Takatoshi Kobayashi. 1. Introduction. 2. Specifications of 3.3 kv IGBT Module
3.3 kv IGBT Modules Takeharu Koga Yasuhiko Arita Takatoshi Kobayashi A B S T R A C T Fuji Electric has developed a 3.3 kv-1.2 ka IGBT module in response to market needs for inverters suitable for industrial
Philosophy of Topology and Components Selection for Cost and Performance in Automotive Converters.
Philosophy of Topology and Components Selection for Cost and Performance in Automotive Converters. Alexander Isurin ( sashai@vanner.com ) Alexander Cook (alecc@vanner.com ) Vanner inc. USA Abstract- This
EMI in Electric Vehicles
EMI in Electric Vehicles S. Guttowski, S. Weber, E. Hoene, W. John, H. Reichl Fraunhofer Institute for Reliability and Microintegration Gustav-Meyer-Allee 25, 13355 Berlin, Germany Phone: ++49(0)3046403144,
Curriculum Vitae. Max-Planck-Institut für Plasmaphysik, Garching, Munich (Germany)
Curriculum Vitae Personal information Surname / First name Spagnolo Silvia Place / date of birth Vicenza (Italy), 22nd May 1982 Nationality Italian Address Via Lago di Fimon 4B, 36057 Arcugnano, Vicenza
2SD315AI Dual SCALE Driver Core for IGBTs and Power MOSFETs
2SD315AI Dual SCALE Driver Core for IGBTs and Power MOSFETs Description The SCALE drivers from CONCEPT are based on a chip set that was developed specifically for the reliable driving and safe operation
Harmonics and Noise in Photovoltaic (PV) Inverter and the Mitigation Strategies
Soonwook Hong, Ph. D. Michael Zuercher Martinson Harmonics and Noise in Photovoltaic (PV) Inverter and the Mitigation Strategies 1. Introduction PV inverters use semiconductor devices to transform the
Design and Applications of HCPL-3020 and HCPL-0302 Gate Drive Optocouplers
Design and Applications of HCPL-00 and HCPL-00 Gate Drive Optocouplers Application Note 00 Introduction The HCPL-00 (DIP-) and HCPL-00 (SO-) consist of GaAsP LED optically coupled to an integrated circuit
DRIVE CIRCUITS FOR POWER MOSFETs AND IGBTs
DRIVE CIRCUITS FOR POWER MOSFETs AND IGBTs by B. Maurice, L. Wuidart 1. INTRODUCTION Unlike the bipolar transistor, which is current driven, Power MOSFETs, with their insulated gates, are voltage driven.
Novel Loaded-Resonant Converter & Application of DC-to-DC Energy Conversions systems
International Refereed Journal of Engineering and Science (IRJES) ISSN (Online) 2319-183X, (Print) 2319-1821 Volume 2, Issue 11 (November 2013), PP.50-57 Novel Loaded-Resonant Converter & Application of
1700V Bi-Mode Insulated Gate Transistor (BIGT) on Thin Wafer Technology
1700V Bi-Mode Insulated Gate Transistor (BIGT) on Thin Wafer Technology Munaf Rahimo, Jan Vobecky, Chiara Corvasce ISPS, September 2010, Prague, Czech Republic Copyright [2010] IEEE. Reprinted from the
Designers Series XII. Switching Power Magazine. Copyright 2005
Designers Series XII n this issue, and previous issues of SPM, we cover the latest technologies in exotic high-density power. Most power supplies in the commercial world, however, are built with the bread-and-butter
Conducted EMI filter design for SMPS
Conducted EMI filter design for Jukka-Pekka Sjöroos Helsinki University of Technology Power Electronics Laboratory Conducted EMI filter design for Introduction EMI in Common Mode(CM noise Differential
Eliminating Parasitic Oscillation between Parallel MOSFETs
Eliminating Parasitic Oscillation between Parallel MOSFETs Based in part on a paper presented at Power Electronics Technology 2003 conference titled Issues with Paralleling MOSFETs and IGBTs by Jonathan
STGW40NC60V N-CHANNEL 50A - 600V - TO-247 Very Fast PowerMESH IGBT
N-CHANNEL 50A - 600V - TO-247 Very Fast PowerMESH IGBT Table 1: General Features STGW40NC60V 600 V < 2.5 V 50 A HIGH CURRENT CAPABILITY HIGH FREQUENCY OPERATION UP TO 50 KHz LOSSES INCLUDE DIODE RECOVERY
Symbol Parameter Value Unit V DS Drain-source Voltage (V GS =0) 50 V V DGR Drain- gate Voltage (R GS =20kΩ) 50 V
BUZ71A N - CHANNEL 50V - 0.1Ω - 13A TO-220 STripFET POWER MOSFET TYPE V DSS R DS(on) I D BUZ71A 50 V < 0.12 Ω 13 A TYPICAL RDS(on) = 0.1 Ω AVALANCHE RUGGED TECHNOLOGY 100% AVALANCHE TESTED HIGH CURRENT
AN ISOLATED GATE DRIVE FOR POWER MOSFETs AND IGBTs
APPLICATION NOTE AN ISOLATED GATE DRIVE FOR POWER MOSFETs AND IGBTs by J.M. Bourgeois ABSTRACT Power MOSFET and IGBT gate drives often face isolation and high voltage constraints. The gate drive described
Bridgeless PFC Implementation Using One Cycle Control Technique
Bridgeless PFC Implementation Using One Cycle Control Technique Bing Lu Center for Power Electronics Systems Virginia Polytechnic Institute and State University 674 Whittemore Hall Blacksburg, VA 24061
A MULTILEVEL INVERTER FOR SYNCHRONIZING THE GRID WITH RENEWABLE ENERGY SOURCES BY IMPLEMENTING BATTERY CUM DC-DC CONERTER
A MULTILEVEL INVERTER FOR SYNCHRONIZING THE GRID WITH RENEWABLE ENERGY SOURCES BY IMPLEMENTING BATTERY CUM DC-DC CONERTER 1 KARUNYA CHRISTOBAL LYDIA. S, 2 SHANMUGASUNDARI. A, 3 ANANDHI.Y 1,2,3 Electrical
Application Note AN-1070
Application Note AN-1070 Class D Audio Amplifier Performance Relationship to MOSFET Parameters By Jorge Cerezo, International Rectifier Table of Contents Page Abstract... 2 Introduction... 2 Key MOSFET
SiC Jfet technology for a jump in Inverter efficiency. SemiSouth Laboratories, Inc. www.semisouth.com
SiC Jfet technology for a jump in Inverter efficiency SemiSouth Laboratories, Inc. Nigel Springett Applications consultant nigel.springett@semisouth.com www.semisouth.com Italian Distributor Enrico Falloni
TDA4605 CONTROL CIRCUIT FOR SWITCH MODE POWER SUPPLIES USING MOS TRANSISTORS
CONTROL CIRCUIT FOR SWITCH MODE POWER SUPPLIES USING MOS TRANSISTORS Fold-Back Characteristic provides Overload Protection for External Diodes Burst Operation under Short-Circuit and no Load Conditions
An Efficient AC/DC Converter with Power Factor Correction
An Efficient AC/DC Converter with Power Factor Correction Suja C Rajappan 1, K. Sarabose 2, Neetha John 3 1,3 PG Scholar, Sri Shakthi Institute of Engineering & Technology, L&T Bypass Road, Coimbatore-62,
Design of High Voltage Low Power Supply Device
Universal Journal of Electrical and Electronic Engineering 3(1): 6-12, 2015 DOI: 10.13189/ujeee.2015.030102 http://www.hrpub.org Design of High Voltage Low Power Supply Device Nader Barsoum *, Glenn Isaiah
Symbol Parameter Value Unit IAR Avalanche Current, Repetitive or Not-Repetitive
BUZ11 N - CHANNEL 50V - 0.03Ω - 30A -TO-220 STripFET POWER MOSFET TYPE V DSS R DS(on) I D BUZ11 50 V < 0.04 Ω 30 A TYPICAL R DS(on) = 0.03 Ω AVALANCHE RUGGED TECHNOLOGY 100% AVALANCHE TESTED HIGH CURRENT
Design and Construction of Variable DC Source for Laboratory Using Solar Energy
International Journal of Electronics and Computer Science Engineering 228 Available Online at www.ijecse.org ISSN- 2277-1956 Design and Construction of Variable DC Source for Laboratory Using Solar Energy
Design Considerations to Increase Power Density in Welding Machines Converters Using TRENCHSTOP 5 IGBT
Design Considerations to Increase Power Density in Welding Machines Converters Using TRENCHSTOP 5 IGBT Fabio Brucchi (*), Forrest Zheng (**) (*) Infineon Technologies Austria AG, Siemensstrasse 2, 9500
ISPS2014 Workshop Energy to Smart Grids Presenting results of ENIAC project: E2SG (Energy to Smart Grid)
ISPS2014 Workshop Energy to Smart Grids Presenting results of ENIAC project: E2SG (Energy to Smart Grid) Bidirectional isolating AC/DC converter for coupling DC grids with the AC mains based on a modular
Transformerless UPS systems and the 9900 By: John Steele, EIT Engineering Manager
Transformerless UPS systems and the 9900 By: John Steele, EIT Engineering Manager Introduction There is a growing trend in the UPS industry to create a highly efficient, more lightweight and smaller UPS
High-Megawatt Converter Technology Workshop for Coal-Gas Based Fuel Cell Power Plants January 24, 2007 at NIST
Session 4a Enjeti 1 High-Megawatt Converter Technology Workshop for Coal-Gas Based Fuel Cell Power Plants January 24, 2007 at NIST Dr. Prasad Enjeti TI TI Professor Power Electronics Laboratory College
Application Note 9020. IGBT Basic II CONTENTS. April, 2002. By K.J Um. Section I. Gate drive considerations
B. R G a. Effect on turn-on Application Note 9020 April, 2002 IGBT Basic II By K.J Um CONTENTS Section I. Gate drive considerations 1. Introductions 2. Gate Drive Considerations 3. IGBT switching waveforms
Design Insulated Hybrid Transformer of Application for AC Adapters of Smart devices
ISSN (Online 2321 2004 Design Insulated Hybrid Transformer of Application for AC Adapters of Smart devices HeungGyoon(Harry Choi 1, KyuSun Chung 1, Ge Li 2, XinLan Li 2 Department of Electrical Engineering,
Comparison of the Chip Area Usage of 2-level and 3-level Voltage Source Converter Topologies
Comparison of the Chip Area Usage of 2-level and 3-level Voltage Source Converter Topologies Mario Schweizer, Ignacio Lizama, Thomas Friedli and Johann W. Kolar Power Electronic Systems Laboratory ETH
organismos internacionales
Semiconductores de potencia de gap ancho en organismos internacionales Philippe Godignon & Power devices and Systems Group Systems Integration Department Centro Nacional de Microelectrónica, CNM CNM-CSIC,
A Zero-Voltage Switching Two-Inductor Boost Converter With an Auxiliary Transformer
A Zero-Voltage Switching Two-Inductor Boost Converter With an Auxiliary Transformer Quan Li and Peter Wolfs Central Queensland University Rockhampton Mail Center, QLD 47, Australia Abstract-The two-inductor
José A. Cobos, Pedro Alou Centro de Electrónica Industrial (CEI)
José A. Cobos, Pedro Alou Centro de (CEI) Universidad Politécnica de Madrid www.cei.upm.es September 2008 Outline Motivation Cout, Current & voltage steps Optimal time control Analog implementations V
Project description. Power Electronics for Reliable and Energy efficient Renewable Energy Systems
Project description Title: Power Electronics for Reliable and Energy efficient Renewable Energy Systems OBJECTIVES Principal objective Provide competence and decision basis for enabling reliable and energy
UNDERSTANDING AND CONTROLLING COMMON-MODE EMISSIONS IN HIGH-POWER ELECTRONICS
Page 1 UNDERSTANDING AND CONTROLLING COMMON-MODE EMISSIONS IN HIGH-POWER ELECTRONICS By Henry Ott Consultants Livingston, NJ 07039 (973) 992-1793 www.hottconsultants.com hott@ieee.org Page 2 THE BASIC
Renewable Energy Applications: Photovoltaic and Wind Energy Conversion Systems (WECS)
Renewable Energy Applications: Photovoltaic and Wind Energy Conversion Systems (WECS) Josep Pou Antoni Arias Page 1 Outline 1. Renewable Energy Perspectives 2. Solar Photovoltaic (PV) 3. Wind Generation
High Voltage Silicon Carbide Power Devices
High Voltage Silicon Carbide Power Devices ARPA-E Power Technologies Workshop February 9, 2010 John W. Palmour Cree, Inc. 4600 Silicon Drive Durham, NC 27703; USA Tel:: 919-313-5646 Email: john_palmour@cree.com
IS2.3-6 Wide Bandgap (WBG) Power Devices for High-Density Power Converters Excitement and Reality
IS2.3-6 Wide Bandgap (WBG) Power Devices for High-Density Power Converters Excitement and Reality Krishna Shenai, Ph.D. Principal Electrical Engineer, Argonne National Laboratory Senior Fellow, NAISE,
System Benefits for Solar Inverters using SiC Semiconductor Modules
System Benefits for Solar Inverters using SiC Semiconductor Modules Ulrich Schwarzer ulrich.schwarzer@infineon.com Stefan Buschhorn stefan.buschhorn@infineon.com Klaus Vogel klaus.vogel@infineon.com Infineon
Application Note, Rev.1.0, September 2008 TLE8366. Application Information. Automotive Power
Application Note, Rev.1.0, September 2008 TLE8366 Automotive Power Table of Contents 1 Abstract...3 2 Introduction...3 3 Dimensioning the Output and Input Filter...4 3.1 Theory...4 3.2 Output Filter Capacitor(s)
CHAPTER - 1. Chapter ONE: WAVES CHAPTER - 2. Chapter TWO: RAY OPTICS AND OPTICAL INSTRUMENTS. CHAPTER - 3 Chapter THREE: WAVE OPTICS PERIODS PERIODS
BOARD OF INTERMEDIATE EDUCATION, A.P., HYDERABAD REVISION OF SYLLABUS Subject PHYSICS-II (w.e.f 2013-14) Chapter ONE: WAVES CHAPTER - 1 1.1 INTRODUCTION 1.2 Transverse and longitudinal waves 1.3 Displacement
Optical Link ASICs for LHC Upgrades
Optical Link ASICs for LHC Upgrades K.K. Gan, H.P. Kagan, R.D. Kass, J. Moore, S. Smith The Ohio State University July 30, 2009 K.K. Gan DPF2009 1 Outline Introduction VCSEL driver chip PIN receiver/decoder
High Power Density Capacitor Charging Power Supply Development for Repetitive Pulsed Power
High Power Density Capacitor Charging Power Supply Development for Repetitive Pulsed Power M. M. McQuage, V.P. McDowell, F.E. Peterkin, and J. A. Pasour Directed Energy Technology Office, Code B2 Dahlgren
PSE 6031 SYLLABUS (Tentative)
PSE 6031 SYLLABUS (Tentative) Power Electronics (3 credits) Friday Afternoon: 1:00-3:00 PM 15 Virtual Class Meetings (no face-face meetings) Pre-requisites: All coursework to qualify for the upper division
Semiconductor Technology
May 4 th, 2011 Semiconductor Technology Evolution to optimize inverter efficiency Andrea Merello Field Applications Engineer Page 1 More than 70% of the energy gets lost on its way to the target application
Chapter 4. LLC Resonant Converter
Chapter 4 LLC Resonant Converter 4.1 Introduction In previous chapters, the trends and technical challenges for front end DC/DC converter were discussed. High power density, high efficiency and high power
ST SiC MOSFET Evolution in Power Electronics
ST SiC MOSFET Evolution in Power Electronics Simone Buonomo Market & Application Development Manager Power Transistor Division simone.buonomo@st.com Power Transistor Division Agenda 2 SiC MOSFET Time Speaker
STP6N60FI N - CHANNEL ENHANCEMENT MODE POWER MOS TRANSISTOR
N - CHANNEL ENHANCEMENT MODE POWER MOS TRANSISTOR TYPE VDSS RDS(on) ID STP6N60FI 600 V < 1.2 Ω 3.8 A TYPICAL R DS(on) =1Ω AVALANCHE RUGGED TECHNOLOGY 100% AVALANCHE TESTED REPETITIVE AVALANCHE DATA AT
A COMPERATIVE PERFORMANCE ANALYSIS OF BRIDGELESS PFC BOOST CONVERTER WITH THE CONVENTIONAL CONVERTER
A COMPERATIVE PERFORMANCE ANALYSIS OF BRIDGELESS PFC BOOST CONVERTER WITH THE CONVENTIONAL CONVERTER Shantiswaroop Agarwal 1, Pooja Gautam 2, Gaurav Kumar Sharma 3, Manoj Kumar Bhardwaj 4 1,2,3,4 Institute
GS66516T Top-side cooled 650 V E-mode GaN transistor Preliminary Datasheet
Features 650 V enhancement mode power switch Top-side cooled configuration R DS(on) = 25 mω I DS(max) = 60 A Ultra-low FOM Island Technology die Low inductance GaNPX package Easy gate drive requirements
Design of an Auxiliary Power Distribution Network for an Electric Vehicle
Design of an Auxiliary Power Distribution Network for an Electric Vehicle William Chen, Simon Round and Richard Duke Department of Electrical & Computer Engineering University of Canterbury, Christchurch,
STP80NF55-08 STB80NF55-08 STB80NF55-08-1 N-CHANNEL 55V - 0.0065 Ω - 80A D2PAK/I2PAK/TO-220 STripFET II POWER MOSFET
STP80NF55-08 STB80NF55-08 STB80NF55-08-1 N-CHANNEL 55V - 0.0065 Ω - 80A D2PAK/I2PAK/TO-220 STripFET II POWER MOSFET TYPE V DSS R DS(on) I D STB80NF55-08/-1 STP80NF55-08 55 V 55 V
Improving Efficiency in AC drives: Comparison of Topologies and Device Technologies
Improving Efficiency in AC drives: Comparison of Topologies and Device Technologies Klaus Vogel, Infineon Technologies AG, Max-Planck-Straße 5, 59581 Warstein Adalberto Jose Rossa, WEG Automation R&D Center,
ULRASONIC GENERATOR POWER CIRCUITRY. Will it fit on PC board
ULRASONIC GENERATOR POWER CIRCUITRY Will it fit on PC board MAJOR COMPONENTS HIGH POWER FACTOR RECTIFIER RECTIFIES POWER LINE RAIL SUPPLY SETS VOLTAGE AMPLITUDE INVERTER INVERTS RAIL VOLTAGE FILTER FILTERS
Parametric variation analysis of CUK converter for constant voltage applications
ISSN (Print) : 232 3765 (An ISO 3297: 27 Certified Organization) Vol. 3, Issue 2, February 214 Parametric variation analysis of CUK converter for constant voltage applications Rheesabh Dwivedi 1, Vinay
High Performance ZVS Buck Regulator Removes Barriers To Increased Power Throughput In Wide Input Range Point-Of-Load Applications
White paper High Performance ZVS Buck Regulator Removes Barriers To Increased Power Throughput In Wide Input Range Point-Of-Load Applications Written by: C. R. Swartz Principal Engineer, Picor Semiconductor
I. INTRODUCTION II. MOSFET FAILURE MODES IN ZVS OPERATION
MOSFET Failure Modes in the Zero-Voltage-Switched Full-Bridge Switching Mode Power Supply Applications Alexander Fiel and Thomas Wu International Rectifier Applications Department El Segundo, CA 9045,
High Intensify Interleaved Converter for Renewable Energy Resources
High Intensify Interleaved Converter for Renewable Energy Resources K. Muthiah 1, S.Manivel 2, Gowthaman.N 3 1 PG Scholar, Jay Shriram Group of Institutions,Tirupur 2 Assistant Professor, Jay Shriram Group
Understanding SMD Power Inductors. Application Note. July 2011
Understanding SMD Power Inductors July 2011 Application Note Power inductors play an important role in voltage conversion applications by yielding lower core losses. They are also used to store energy,
Improvement of Charging Resource in Repetitive Pulsed Power by High Power Density Capacitor
J. Appl. Environ. Biol. Sci., 4(12S)65-70, 2015 2015, TextRoad Publication ISSN: 2090-4274 Journal of Applied Environmental and Biological Sciences www.textroad.com Improvement of Charging Resource in
AND8229/D. An Introduction to Transient Voltage Suppression Devices APPLICATION NOTE
An Introduction to Transient Voltage Suppression Devices Prepared by: Jim Lepkowski ON Semiconductor APPLICATION NOTE INTRODUCTION Transient Voltage Suppression (TVS) protection devices such as shielded
Power supply output voltages are dropping with each
DESIGNER S SERIES Second-Stage LC Filter Design First Inductor by Dr. Ray Ridley First Capacitor Power supply output voltages are dropping with each new generation of Integrated Circuits (ICs). Anticipated
How To Control A Single Phase Sinusoidal Pulse Width Modulation (S) Controller Based Inverter For Photovoltaic Power Generation
2012 International Conference on Clean and Green Energy IPCBEE vol.27 (2012) (2012) IACSIT Press, Singapore LOW COST, HIGH EFFICIENT S CONTROLLER FOR PHOTOVOLTAIC INVERTER Aswinkarthik R V 1+, Vivekshankar
A High-Voltage AC/DC Resonant Converter Based on PRC With Single Capacitor as an Output Filter
A High-Voltage AC/DC Resonant Converter Based on PRC With Single Capacitor as an Output Filter Diaz, J.; Villegas Saiz, P.J.; Martin-Ramos, J.A.; Martin-Pernia, A.; Martinez, J.A.; Industry Applications,
Modeling Grid Connection for Solar and Wind Energy
1 Modeling Grid Connection for Solar and Wind Energy P. J. van Duijsen, Simulation Research, The Netherlands Frank Chen, Pitotech, Taiwan Abstract Modeling of grid connected converters for solar and wind
Advantages of SiC MOSFETs in Power Applications
Advantages of SiC MOSFETs in Power Applications Power Forum, Bologna September 18 th, 2014 Pascal Ducluzeau Product Marketing Director Microsemi Power Module Products pducluzeau@microsemi.com Topics Advantages
AND8326/D. PCB Design Guidelines for Dual Power Supply Voltage Translators
PCB Design Guidelines for Dual Power Supply Voltage Translators Jim Lepkowski ON Semiconductor Introduction The design of the PCB is an important factor in maximizing the performance of a dual power supply
2012 San Francisco Colloquium
2012 San Francisco Colloquium http : //www.cigre.org HVDC and Power Electronic Systems for Overhead Line and Insulated Cable Applications B4-8 Trans Bay Cable A Breakthrough of VSC Multilevel Converters
Curriculum Vitae. 01 August 1973, Gümüşhane, TURKEY. Phone : +90 352 4374901 / Ext.: 32230. : kilic@erciyes.edu.tr
Curriculum Vitae Full Name: Date & Place of Birth: Office Contact: Dr. Recai KILIÇ 01 August 1973, Gümüşhane, TURKEY. Dept. of Electrical&Electronics Eng., Faculty of Engineering, Erciyes University, Kayseri,
ELECTRICAL ENGINEERING
EE ELECTRICAL ENGINEERING See beginning of Section H for abbreviations, course numbers and coding. The * denotes labs which are held on alternate weeks. A minimum grade of C is required for all prerequisite
EB215E Printed Circuit Board Layout for Improved Electromagnetic Compatibility
Printed Circuit Board Layout for Improved Author: Eilhard Haseloff Date: 10.07.96 Rev: * The electromagnetic compatibility (EMC) of electronic circuits and systems has recently become of increasing significance.
Cable Discharge Event
Cable Discharge Event 1.0 Introduction The widespread use of electronic equipment in various environments exposes semiconductor devices to potentially destructive Electro Static Discharge (ESD). Semiconductor
CAR IGNITION WITH IGBTS
APPLICATION NOTE CAR IGNITION WITH IGBTS by M. Melito ABSTRACT IGBTs are used in a variety of switching applications thanks to their attractive characteristics, particularly their peak current capability,
Intelligent Drivers. Intelligent Drivers for Power MOSFETs and IGBTs Standard Program. Overview and Product Information
Intelligent Drivers for Power MOSFETs and IGBTs Standard Program Diagram: Various half-bridge drivers from the standard program Internet: www.igbt-driver.com Page 1 Intelligent drivers from CONCEPT Because
High-Voltage Insulated DC/DC Power Supply ISO3116I for gate drivers for 4.5kV and 6.5kV IGBTs
High-Voltage Insulated DC/DC Power Supply ISO3116I for gate drivers for 4.5kV and 6.5kV IGBTs The ISO3116I is a single-channel insulated DC/DC converter suitable as a power supply for IGBT drivers up to
ISTITUTO NAZIONALE DI FISICA NUCLEARE
ISTITUTO NAZIONALE DI FISICA NUCLEARE Sezione di Trieste INFN/TC-2/7 1 aprile 22 A novel scheme for the integrated voltage divider of Silicon Drift Detectors P. Burger 1, C. Piemonte 2, A. Rashevsky 3,
Hybrid Power System with A Two-Input Power Converter
Hybrid Power System with A Two-Input Power Converter Y. L. Juan and H. Y. Yang Department of Electrical Engineering National Changhua University of Education Jin-De Campus, Address: No.1, Jin-De Road,
SIMULATION OF CLOSED LOOP CONTROLLED BRIDGELESS PFC BOOST CONVERTER
SIMULATION OF CLOSED LOOP CONTROLLED BRIDGELESS PFC BOOST CONVERTER 1M.Gopinath, 2S.Ramareddy Research Scholar, Bharath University, Chennai, India. Professor, Jerusalem college of Engg Chennai, India.
Radiated Emission and Susceptibility
Radiated Emission and Susceptibility Tzong-Lin Wu, Ph.D. EMC Lab Department of Electrical Engineering National Taiwan University Differential-Mode v.s. Common-mode Currents 1 Differential-Mode v.s. Common-mode
LVDS Technology Solves Typical EMI Problems Associated with Cell Phone Cameras and Displays
AN-5059 Fairchild Semiconductor Application Note May 2005 Revised May 2005 LVDS Technology Solves Typical EMI Problems Associated with Cell Phone Cameras and Displays Differential technologies such as
IRF830. N - CHANNEL 500V - 1.35Ω - 4.5A - TO-220 PowerMESH MOSFET
IRF830 N - CHANNEL 500V - 1.35Ω - 4.5A - TO-220 PowerMESH MOSFET TYPE V DSS R DS(on) I D IRF830 500 V < 1.5 Ω 4.5 A TYPICAL R DS(on) = 1.35 Ω EXTREMELY HIGH dv/dt CAPABILITY 100% AVALANCHE TESTED VERY
AN1826 APPLICATION NOTE TRANSIENT PROTECTION SOLUTIONS: Transil diode versus Varistor
AN1826 APPLICATION NOTE TRANSIENT PROTECTION SOLUTIONS: Transil diode versus A. BREMOND / C. KAROUI Since the seventies, electronic modules are more and more present in our life. This is the case for our
STW34NB20 N-CHANNEL 200V - 0.062 Ω - 34A TO-247 PowerMESH MOSFET
N-CHANNEL 200V - 0.062 Ω - 34A TO-247 PowerMESH MOSFET Table 1. General Features Figure 1. Package Type V DSS R DS(on) I D STW34NB20 200 V < 0.075 Ω 34 A FEATURES SUMMARY TYPICAL R DS(on) = 0.062 Ω EXTREMELY
7-41 POWER FACTOR CORRECTION
POWER FTOR CORRECTION INTRODUCTION Modern electronic equipment can create noise that will cause problems with other equipment on the same supply system. To reduce system disturbances it is therefore essential
UNIVERSITA DI CATANIA
UNIVERSITA DI CATANIA DIEES Department of Electrical Electronic and Systems Engineering XXI Brain Storming Day Unict Catania 29 Ottobre 2010 Ph.D. student - XXV ciclo Tutor Prof. Angelo Raciti Subjects
Principles of Adjustable Frequency Drives
What is an Adjustable Frequency Drive? An adjustable frequency drive is a system for controlling the speed of an AC motor by controlling the frequency of the power supplied to the motor. A basic adjustable
Curriculum Vitae et Studiorum. Giovanni Losurdo
Curriculum Vitae et Studiorum Giovanni Losurdo Email: losurdo@fi.infn.it losurdo@ego-gw.it Tel: +390554572260 - +39050752317 Homepage: http://hep.fi.infn.it/gruppo2/losurdo Place and date of birth: Bari
Technology for Next-generation Reduced-size High-performance Inverter
Technology for Next-generation Reduced-size High-performance Inverter 28 Technology for Next-generation Reduced-size High-performance Inverter Naoki Kurihara Shuichi Tachihara Kenhachiro Minamide Satoshi
UNISONIC TECHNOLOGIES CO., LTD 50N06 Power MOSFET
UNISONIC TECHNOLOGIES CO., LTD 50N06 50 Amps, 60 Volts N-CHANNEL POWER MOSFET DESCRIPTION TO-263 TO-25 The UTC 50N06 is three-terminal silicon device with current conduction capability of about 50A, fast
Analysis and Experimentation of Interleaved Boost Converter with Ripple Steering for Power Factor Correction
Analysis and Experimentation of Interleaved Boost Converter with Ripple Steering for Power Factor Correction A. Inba Rexy, R. Seyezhai Abstract Through the fast growing technologies, design of power factor
IRF740 N-CHANNEL 400V - 0.46Ω - 10A TO-220 PowerMESH II MOSFET
N-CHANNEL 400V - 0.46Ω - 10A TO-220 PowerMESH II MOSFET TYPE V DSS R DS(on) I D IRF740 400 V < 0.55 Ω 10 A TYPICAL R DS (on) = 0.46Ω EXCEPTIONAL dv/dt CAPABILITY 100% AVALANCHE TESTED LOW GATE CHARGE VERY
Conducted EMI Issues in a Boost PFC Design
Conducted EMI Issues in a Boost PFC Design L. Rossetto University of Padova Department of Electrical Engineering Via Gradenigo 6/A - 35131 Padova - ITALY E-Mail: leopoldo@tania.dei.unipd.it S. Buso, G.Spiazzi
Closed Loop PWM Control for Induction Motor Drive Using Dual Output Three Phase Inverter
Closed Loop PWM Control for Induction Motor Drive Using Dual Output Three Phase Inverter Archana.P 1, Karthick.R 2 Pg Scholar [PED], Department of EEE, CSI College of Engineering, Ketti, Tamilnadu, India
PCB Radiation Mechanisms: Using Component-Level Measurements to
Radiation Directly from PCB Structures PCB Radiation Mechanisms: Using Component-Level Measurements to Determine System-Level Radiated Emissions Signal or component voltage appears between two good antenna
Application Note AN-1005
Application Note AN-1005 Power MOSFET Avalanche Design Guidelines By Tim McDonald, Marco Soldano, Anthony Murray, Teodor Avram Table of Contents Page Table of Figures...3 Introduction...4 Overview...4