2/3/4 NKVE MCE/P CONSTANT PRESSURE SETS WITH MCE/P MULTI INVERTER SYSTEM ON THE PUMP TECHNICAL DATA
|
|
- James Neal Montgomery
- 7 years ago
- Views:
Transcription
1 ELECTRONIC RESSURE SETS MCE/ GE 167 2/3/4 NKVE MCE/ CONSTNT RESSURE SETS WIT MCE/ MULTI INVERTER SYSTEM ON TE UM TECNICL DT Line voltage: 4V three phase Voltage of electric pup: 4V three phase ower frequency: 5-6 z stallation: vertical only Operating range: fro 4 to 28 3 /h uped liquid teperature range: fro C to 8 C Maxiu abient teperature: 4 C Max pressure: 14bar uped liquid: clean, free fro solids. ressure regulation range: 3 to 14 bar. rotection class: I55 LICTIONS The sets with on-board inverter have been designed and anufactured to eet the constant pressure requireents of odern syste engineering solutions. The constant pressure adjustent is a requireent in the ost varied sectors: Water pipelines, Irrigation, dustry, otel, Residential building, Spas. The fundaental concept that has driven our Engineers in developing these pups sets, was to offer a siple to use, flexible, and extreely reliable product. Differently fro traditional fixed speed pups, inverter driven pups give the possibility to adapt the perforance curve to the needs of the syste. the ost classic case, inverter driven pups are used to aintain constant pressure in the syste against variations in the requested flow rate, avoiding pressure fluctuations caused by sall flow rate variations. DVNTGES OF USE Operating pressure stability Excellent energy savings (up to 6 % ) Reduced haering effects Reduced space requireents Less aintenance Reduced pup wear Less power factor correction required Less water consuption tegrated protections. CONSTRUCTION FETURES The sets with MCE/ inverters are built in the standard version with two, three, or four centrifugal electric pups, copletely assebled on galvanised steel base, tested and ready for installation. Coplete with isolator and check valves for each pup, suction and delivery anifolds, expansion vessels, pressure sensor, on-pup inverter, protection control unit. (possibility of optional flow sensor for pressure control). MULTI INVERTER SYSTEM WIT ON-UM MCE/ The inverter continuously adjusts the rotation speed of the electric pup, keeping the pressure constant, even when the flow rate varies. The other electric pups, also with variable speed, are activated in cascade aer the first one has reached axiu speed. Through odulation, they copensate the pressure fluctuations of the syste. For every operating cycle, it is possible to switch the restart to a different pup, therefore ensuring even use of all electric pups. It is possible to set operation ties for each individual pup, switching to another pup aer such set ties. The "S" pressure can be adjusted by the user using the "+" and "-" keys found on the MCE/ (as a rule, all the pups are set to the sae pressure value). With the new MCE/, it is sufficient to set the data on one of the devices, and it will be autoatically propagated to the other pups of the syste. ELECTRIC COMONENTS SULIED MCE/ inverter with the following features: bnoral voltage protection. djustable aperoetric protection. Dry run protection (without iniu anoeter). Output phases short circuit protection. Overteperature and overvoltage protection. nti-seizing and anti-freeze functions. ressure sensor fault. Theral agnetic protection control unit (siplified connection). ressure sensor on the delivery anifold. DB UMS reserves the right to ake odifications without notice. 3
2 2 NKVE 1 -MCE/ - CONSTNT RESSURE BOOSTER SETS uped liquid teperature range: fro -15 C to +8 C - Maxiu abient teperature: +4 C - Max flow rate: 26 3 /h ka /14 Q US gp Q IM gp 5 ELECTRONIC RESSURE SETS / /1 1/ /8 1/ /6 2 1/ Q 3 /h Q l/s Q l/in The perforance curves are based on kineatic viscosity values = 1 2 /s and density equal to 1 / 3. Curve tolerance according to ISO 996. Overall perforance taking into account TWO pups working at the sae tie. UM+INVERTER OWER INUT 2 NOMINL MCE/ MXIMUM FLOW RTE 3 /h MX OBTINBLE STNDRD 2 NKVE 1/5 T MCE3/ 3 x 4V 5z 2x2.2 2x3 2x4.9 MCE3/ , 2 NKVE 1/6 T MCE3/ 3 x 4V 5z 2x2.2 2x3 2x5.4 MCE3/ NKVE 1/7 T MCE3/ 3 x 4V 5z 2x3 2x4 2x7.37 MCE3/ NKVE 1/8 T MCE3/ 3 x 4V 5z 2x3 2x4 2x7.37 MCE3/ NKVE 1/9 T MCE3/ 3 x 4V 5z 2x3 2x4 2x7.37 MCE3/ NKVE 1/1 T MCE3/ 3 x 4V 5z 2x4 2x5.5 2x1.1 MCE3/ NKVE 1/12 T MCE55/ 3 x 4V 5z 2x4 2x5.5 2x1.1 MCE55/ NKVE 1/14 T MCE55/ 3 x 4V 5z 2x5.5 2x7.5 2x13.1 MCE55/ MX B B1 C 1 2 MX DN DNM CKING DIMENSIONS L/ L/B 2 NKVE 1/5 T MCE3/ /2 2 1/ NKVE 1/6 T MCE3/ /2 2 1/ NKVE 1/7 T MCE3/ /2 2 1/ NKVE 1/8 T MCE3/ /2 2 1/ NKVE 1/9 T MCE3/ /2 2 1/ NKVE 1/1 T MCE55/ /2 2 1/ NKVE 1/12 T MCE55/ /2 2 1/ NKVE 1/14 T MCE55/ /2 2 1/ WEIGT DB UMS reserves the right to ake odifications without notice. 31
3 ELECTRONIC RESSURE SETS 2 NKVE 15 -MCE/ - CONSTNT RESSURE BOOSTER SETS uped liquid teperature range: fro -15 C to +8 C - Maxiu abient teperature: +4 C - Max flow rate: 48 3 /h ka /1 Q US gp Q IM gp / /8 15/ / /5 15/ / Q 3 /h Q l/s Q l/in The perforance curves are based on kineatic viscosity values = 1 2 /s and density equal to 1 / 3. Curve tolerance according to ISO 996. Overall perforance taking into account TWO pups working at the sae tie. UM+INVERTER OWER INUT 2 NOMINL MCE/ MXIMUM FLOW RTE 3 /h MX OBTINBLE STNDRD 2 NKVE 15/3 T MCE3/ 3 x 4V 5z 2x3 2x4 2x7.37 MCE3/ NKVE 15/4 T MCE55/ 3 x 4V 5z 2x4 2x5.5 2x1.1 MCE55/ NKVE 15/5 T MCE55/ 3 x 4V 5z 2x4 2x5.5 2x1.1 MCE55/ NKVE 15/6 T MCE55/ 3 x 4V 5z 2x5.5 2x MCE55/ NKVE 15/7 T MCE55/ 3 x 4V 5z 2x5.5 2x7.5 2x13.1 MCE55/ NKVE 15/8 T MCE11/ 3 x 4V 5z 2x7.5 2x1 2x17.6 MCE11/ NKVE 15/9 T MCE11/ 3 x 4V 5z 2x7.5 2x1 2x17.6 MCE11/ NKVE 15/1 T MCE11/ 3 x 4V 5z 2x11 2x15 2x25.5 MCE11/ MX B B1 C 1 2 MX DN DNM CKING DIMENSIONS L/ L/B 2 NKVE 15/3 T MCE3/ NKVE 15/4 T MCE55/ NKVE 15/5 T MCE55/ NKVE 15/6 T MCE55/ NKVE 15/7 T MCE55/ NKVE 15/8 T MCE11/ NKVE 15/9 T MCE11/ NKVE 15/1 T MCE11/ WEIGT DB UMS reserves the right to ake odifications without notice. 32
4 2 NKVE 2 -MCE/ - CONSTNT RESSURE BOOSTER SETS uped liquid teperature range: fro -15 C to +8 C - Maxiu abient teperature: +4 C - Max flow rate: 58 3 /h ka /1 2/9 2/ Q US gp Q IM gp 5 4 ELECTRONIC RESSURE SETS /7 2/6 2/ / / Q 3 /h Q l/s Q l/in The perforance curves are based on kineatic viscosity values = 1 2 /s and density equal to 1 / 3. Curve tolerance according to ISO 996. Overall perforance taking into account TWO pups working at the sae tie. UM+INVERTER OWER INUT 2 NOMINL MCE/ MXIMUM FLOW RTE 3 /h MX OBTINBLE STNDRD 2 NKVE 2/3 T MCE55/ 3 x 4V 5z 2x4 2x5.5 2x1.1 MCE55/ NKVE 2/4 T MCE55/ 3 x 4V 5z 2x5.5 2x7.5 2x13.1 MCE55/ NKVE 2/5 T MCE55/ 3 x 4V 5z 2x5.5 2x7.5 2x13.1 MCE55/ NKVE 2/6 T MCE11/ 3 x 4V 5z 2x7.5 2x1 2x17.6 MCE11/ NKVE 2/7 T MCE11/ 3 x 4V 5z 2x7.5 2x1 2x17.6 MCE11/ NKVE 2/8 T MCE11/ 3 x 4V 5z 2x11 2x15 2x25.5 MCE11/ NKVE 2/9 T MCE11/ 3 x 4V 5z 2x11 2x15 2x25.5 MCE11/ NKVE 2/1 T MCE11/ 3 x 4V 5z 2x11 2x15 2x25.5 MCE11/ MX B B1 C 1 2 MX DN DNM CKING DIMENSIONS L/ L/B 2 NKVE 2/3 T MCE55/ NKVE 2/4 T MCE55/ NKVE 2/5 T MCE55/ NKVE 2/6 T MCE11/ NKVE 2/7 T MCE11/ NKVE 2/8 T MCE11/ NKVE 2/9 T MCE11/ NKVE 2/1 T MCE11/ WEIGT DB UMS reserves the right to ake odifications without notice. 33
5 ELECTRONIC RESSURE SETS 2 NKVE 32 -MCE/ - CONSTNT RESSURE BOOSTER SETS uped liquid teperature range: fro -15 C to +8 C - Maxiu abient teperature: +4 C - Max flow rate: 9 3 /h ka Q US gp /6 Q IM gp DN C B DNM /5 32/5-2 32/4 32/3 32/3-2 32/ Q 3 /h Q l/s 25 3, Q l/in The perforance curves are based on kineatic viscosity values = 1 2 /s and density equal to 1 / 3. Curve tolerance according to ISO 996. Overall perforance taking into account TWO pups working at the sae tie. UM+INVERTER OWER INUT 2 NOMINL MCE/ MXIMUM FLOW RTE 3 /h MX OBTINBLE STNDRD 2 NKVE 32/2 T MCE 4-5 3x4 5-6z 2x5,5 2x7,5 2x13,1 MCE55/ NKVE 32/3-2 T MCE 4-5 3x4 5-6z 2x5,5 2x7,5 2x13,1 MCE55/ NKVE 32/3 T MCE 4-5 3x4 5-6z 2x7,5 2x1 2x17,6 MCE11/ NKVE 32/4 T MCE 4-5 3x4 5-6z 2x11 2x15 2x25,5 MCE11/ NKVE 32/5-2 T MCE 4-5 3x4 5-6z 2x11 2x15 2x25,5 MCE11/ NKVE 32/5 T MCE 4-5 3x4 5-6z 2x15 2x2 2x34 MCE15/ NKVE 32/6 T MCE 4-5 3x4 5-6z 2x15 2x2 2x34 MCE15/ B C 1 2 DN DNM CKING DIMENSIONS L/ L/B WEIGT 2 NKVE 32/2 T MCE NKVE 32/3-2 T MCE NKVE 32/3 T MCE NKVE 32/4 T MCE NKVE 32/5-2 T MCE NKVE 32/5 T MCE NKVE 32/6 T MCE DB UMS reserves the right to ake odifications without notice. 34
6 2 NKVE 45 -MCE/ - CONSTNT RESSURE BOOSTER SETS uped liquid teperature range: fro -15 C to +8 C - Maxiu abient teperature: +4 C - Max flow rate: 14 3 /h ka Q US gp / Q IM gp 35 3 ELECTRONIC RESSURE SETS DN C B DNM / /2 45/ Q 3 /h Q l/s Q l/in The perforance curves are based on kineatic viscosity values = 1 2 /s and density equal to 1 / 3. Curve tolerance according to ISO 996. Overall perforance taking into account TWO pups working at the sae tie. UM+INVERTER OWER INUT 2 NOMINL MCE/ MXIMUM FLOW RTE 3 /h MX OBTINBLE STNDRD 2 NKVE 45/2-2 T MCE 4-5 3x4 5-6z 2x5,5 2x7,5 2x13,1 MCE55/ NKVE 45/2 T MCE 4-5 3x4 5-6z 2x7,5 2x1 2x17,6 MCE11/ NKVE 45/3 T MCE 4-5 3x4 5-6z 2x11 2x15 2x25,5 MCE11/ NKVE 45/4 T MCE 4-5 3x4 5-6z 2x15 2x2 2x34 MCE15/ B C 1 2 DN DNM CKING DIMENSIONS L/ L/B WEIGT 2 NKVE 45/2-2 T MCE NKVE 45/2 T MCE NKVE 45/3 T MCE NKVE 45/4 T MCE DB UMS reserves the right to ake odifications without notice. 35
7 ELECTRONIC RESSURE SETS 3 NKVE 1 - MCE/ - CONSTNT RESSURE BOOSTER SETS uped liquid teperature range: fro -15 C to +8 C - Maxiu abient teperature: +4 C - Max flow rate: 39 3 /h ka /14 Q US gp Q IM gp / /1 1/ /8 1/ /6 2 1/ Q 3 /h Q l/s Q l/in The perforance curves are based on kineatic viscosity values = 1 2 /s and density equal to 1 / 3. Curve tolerance according to ISO 996. Overall perforance taking into account TREE pups working at the sae tie. UM+INVERTER OWER INUT 2 NOMINL MCE/ MXIMUM FLOW RTE 3 /h MX OBTINBLE STNDRD 3 NKVE 1/5 T MCE3/ 3 x 4V 5z 3x2.2 3x3 3x4.9 MCE3/ NKVE 1/6 T MCE3/ 3 x 4V 5z 3x2.2 3x3 3x5.4 MCE3/ NKVE 1/7 T MCE3/ 3 x 4V 5z 3x3 3x4 3x7.37 MCE3/ NKVE 1/8 T MCE3/ 3 x 4V 5z 3x3 3x4 3x7.37 MCE3/ NKVE 1/9 T MCE3/ 3 x 4V 5z 3x3 3x4 3x7.37 MCE3/ NKVE 1/1 T MCE55/ 3 x 4V 5z 3x4 3x5.5 3x1.1 MCE55/ NKVE 1/12 T MCE55/ 3 x 4V 5z 3x4 2x5.5 3x1.1 MCE55/ NKVE 1/14 T MCE55/ 3 x 4V 5z 3x5.5 3x7.5 3x13.1 MCE55/ MX B B1 C 1 2 MX DN DNM CKING DIMENSIONS L/ L/B 3 NKVE 1/5 T MCE3/ NKVE 1/6 T MCE3/ NKVE 1/7 T MCE3/ NKVE 1/8 T MCE3/ NKVE 1/9 T MCE3/ NKVE 1/1 T MCE55/ NKVE 1/12 T MCE55/ NKVE 1/14 T MCE55/ WEIGT DB UMS reserves the right to ake odifications without notice. 36
8 3 NKVE 15 -MCE/ - CONSTNT RESSURE BOOSTER SETS uped liquid teperature range: fro -15 C to +8 C - Maxiu abient teperature: +4 C - Max flow rate: 72 3 /h ka / Q US gp Q IM gp 5 ELECTRONIC RESSURE SETS / /8 15/ / /5 15/ / Q 3 /h Q l/s Q l/in The perforance curves are based on kineatic viscosity values = 1 2 /s and density equal to 1 / 3. Curve tolerance according to ISO 996. Overall perforance taking into account TREE pups working at the sae tie. UM+INVERTER OWER INUT 2 NOMINL MCE/ MXIMUM FLOW RTE 3 /h MX OBTINBLE STNDRD 3 NKVE 15/3 T MCE3/ 3 x 4V 5z 3x3 3x4 3x7.37 MCE3/ NKVE 15/4 T MCE55/ 3 x 4V 5z 3x4 3x5.5 3x1.1 MCE55/ NKVE 15/5 T MCE55/ 3 x 4V 5z 3x4 3x5.5 3x1.1 MCE55/ NKVE 15/6 T MCE55/ 3 x 4V 5z 3x5.5 3x7.5 3X13.1 MCE55/ NKVE 15/7 T MCE55/ 3 x 4V 5z 3x5.5 3x7.5 3x13.1 MCE55/ NKVE 15/8 T MCE11/ 3 x 4V 5z 3x7.5 3x1 3x17.6 MCE11/ NKVE 15/9 T MCE11/ 3 x 4V 5z 3x7.5 3x1 3x17.6 MCE11/ NKVE 15/1 T MCE11/ 3 x 4V 5z 3x11 3x15 3x25.5 MCE11/ MX B B1 C 1 2 MX DN DNM CKING DIMENSIONS L/ L/B 3 NKVE 15/3 T MCE3/ NKVE 15/4 T MCE55/ NKVE 15/5 T MCE55/ NKVE 15/6 T MCE55/ NKVE 15/7 T MCE55/ NKVE 15/8 T MCE11/ NKVE 15/9 T MCE11/ NKVE 15/1 T MCE11/ WEIGT DB UMS reserves the right to ake odifications without notice. 37
9 ELECTRONIC RESSURE SETS 3 NKVE 2 -MCE/ - CONSTNT RESSURE BOOSTER SETS uped liquid teperature range: fro -15 C to +8 C - Maxiu abient teperature: +4 C - Max flow rate: 87 3 /h ka /1 2/9 2/ Q US gp Q IM gp / /6 2/ / / Q 3 /h Q l/s Q l/in The perforance curves are based on kineatic viscosity values = 1 2 /s and density equal to 1 / 3. Curve tolerance according to ISO 996. Overall perforance taking into account TREE pups working at the sae tie. UM+INVERTER OWER INUT 2 NOMINL [KW] [] [] MCE/ MXIMUM FLOW RTE 3 /h MX OBTINBLE STNDRD 3 NKVE 2/3 T MCE55/ 3 x 4V 5z 3x4 3x5.5 3x1.1 MCE55/ NKVE 2/4 T MCE55/ 3 x 4V 5z 3x5.5 3x7.5 3x13.1 MCE55/ NKVE 2/5 T MCE55/ 3 x 4V 5z 3x5.5 3x7.5 3x13.1 MCE55/ NKVE 2/6 T MCE11/ 3 x 4V 5z 3x7.5 3x1 3x17.6 MCE11/ NKVE 2/7 T MCE11/ 3 x 4V 5z 3x7.5 3x1 3x17.6 MCE11/ NKVE 2/8 T MCE11/ 3 x 4V 5z 3x11 3x15 3x25.5 MCE11/ NKVE 2/9 T MCE11/ 3 x 4V 5z 3x11 3x15 3x25.5 MCE11/ NKVE 2/1 T MCE11/ 3 x 4V 5z 3x11 3x15 3x25.5 MCE11/ MX B B1 C 1 2 MX DN DNM CKING DIMENSIONS L/ L/B 3 NKVE 2/3 T MCE55/ NKVE 2/4 T MCE55/ NKVE 2/5 T MCE55/ NKVE 2/6 T MCE11/ NKVE 2/7 T MCE11/ NKVE 2/8 T MCE11/ NKVE 2/9 T MCE11/ NKVE 2/1 T MCE11/ WEIGT DB UMS reserves the right to ake odifications without notice. 38
10 3 NKVE 32 -MCE/ - CONSTNT RESSURE BOOSTER SETS uped liquid teperature range: fro -15 C to +8 C - Maxiu abient teperature: +4 C - Max flow rate: /h DN C B DNM 1-2 ka Q US gp /6 32/5 32/5-2 32/4 32/3 32/3-2 32/2 Q IM gp ELECTRONIC RESSURE SETS Q 3 /h Q l/s 25 3, Q l/in The perforance curves are based on kineatic viscosity values = 1 2 /s and density equal to 1 / 3. Curve tolerance according to ISO 996. Overall perforance taking into account TREE pups working at the sae tie. UM+INVERTER OWER INUT 2 NOMINL MCE/ MXIMUM FLOW RTE 3 /h MX OBTINBLE STNDRD 3 NKVE 32/2 T MCE 4-5 3x4 5-6z 2x5,5 2x7,5 2x13,1 MCE55/ NKVE 32/3-2 T MCE 4-5 3x4 5-6z 2x5,5 2x7,5 2x13,1 MCE55/ NKVE 32/3 T MCE x 4V 5z 2x7,5 2x1 2x17,6 MCE11/ NKVE 32/4 T MCE x 4V 5z 2x11 2x15 2x25,5 MCE11/ NKVE 32/5-2 T MCE x 4V 5z 2x11 2x15 2x25,5 MCE11/ NKVE 32/5 T MCE 4-5 3x4 5-6z 2x15 2x2 2x34 MCE15/ NKVE 32/6 T MCE 4-5 3x4 5-6z 2x15 2x2 2x34 MCE15/ B C 1 2 DN DNM CKING DIMENSIONS L/ L/B WEIGT 3 NKVE 32/2 T MCE NKVE 32/3-2 T MCE NKVE 32/3 T MCE NKVE 32/4 T MCE NKVE 32/5-2 T MCE NKVE 32/5 T MCE NKVE 32/6 T MCE DB UMS reserves the right to ake odifications without notice. 39
11 ELECTRONIC RESSURE SETS 3 NKVE 45 -MCE/ - CONSTNT RESSURE BOOSTER SETS uped liquid teperature range: fro -15 C to +8 C - Maxiu abient teperature: +4 C - Max flow rate: 21 3 /h ka Q US gp / Q IM gp 35 3 DN C B DNM / /2 45/ Q 3 /h Q l/s Q l/in The perforance curves are based on kineatic viscosity values = 1 2 /s and density equal to 1 / 3. Curve tolerance according to ISO 996. Overall perforance taking into account TREE pups working at the sae tie. UM+INVERTER OWER INUT 2 NOMINL MCE/ MXIMUM FLOW RTE 3 /h MX OBTINBLE STNDRD 3 NKVE 45/2-2 T MCE 4-5 3x4 5-6z 2x5,5 2x7,5 2x13,1 MCE55/ NKVE 45/2 T MCE 4-5 3x4 5-6z 2x7,5 2x1 2x17,6 MCE11/ NKVE 45/3 T MCE x 4V 5z 2x11 2x15 2x25,5 MCE11/ NKVE 45/4 T MCE 4-5 3x4 5-6z 2x15 2x2 2x34 MCE15/ B C 1 2 DN DNM CKING DIMENSIONS L/ L/B WEIGT 3 NKVE 45/2-2 T MCE NKVE 45/2 T MCE NKVE 45/3 T MCE NKVE 45/4 T MCE DB UMS reserves the right to ake odifications without notice. 4
12 4 NKVE 1 -MCE/ - CONSTNT RESSURE BOOSTER SETS uped liquid teperature range: fro -15 C to +8 C - Maxiu abient teperature: +4 C - Max flow rate: 52 3 /h ka / Q US gp Q IM gp 5 ELECTRONIC RESSURE SETS / /1 1/ /8 1/ /6 2 1/ Q 3 /h Q l/s Q l/in The perforance curves are based on kineatic viscosity values = 1 2 /s and density equal to 1 / 3. Curve tolerance according to ISO 996. Overall perforance taking into account FOUR pups working at the sae tie. UM+INVERTER OWER INUT 2 NOMINL MCE/ MXIMUM FLOW RTE 3 /h MX OBTINBLE STNDRD 4 NKVE 1/5 T MCE x 4V 5z 4x2.2 4x3 4x4.9 MCE3/ NKVE 1/6 T MCE x 4V 5z 4x2.2 4x3 4x5.4 MCE3/ NKVE 1/7 T MCE x 4V 5z 4x3 4x4 4x7.37 MCE3/ NKVE 1/8 T MCE x 4V 5z 4x3 4x4 4x7.37 MCE3/ NKVE 1/9 T MCE x 4V 5z 4x3 4x4 4x7.37 MCE3/ NKVE 1/1 T MCE x 4V 5z 4x4 4x5.5 4x1.1 MCE55/ NKVE 1/12 T MCE x 4V 5z 4x4 4x5.5 4x1.1 MCE55/ B C 1 2 MX DN DNM CKING DIMENSIONS L/ L/B 4 NKVE 1/5 T MCE NKVE 1/6 T MCE NKVE 1/7 T MCE NKVE 1/8 T MCE NKVE 1/9 T MCE NKVE 1/1 T MCE NKVE 1/12 T MCE WEIGT DB UMS reserves the right to ake odifications without notice. 41
13 ELECTRONIC RESSURE SETS 4 NKVE 15 -MCE/ - CONSTNT RESSURE BOOSTER SETS uped liquid teperature range: fro -15 C to +8 C - Maxiu abient teperature: +4 C - Max flow rate: 96 3 /h ka / Q US gp Q IM gp / /8 15/ / /5 15/ / Q 3 /h Q l/s Q l/in The perforance curves are based on kineatic viscosity values = 1 2 /s and density equal to 1 / 3. Curve tolerance according to ISO 996. Overall perforance taking into account FOUR pups working at the sae tie. UM+INVERTER OWER INUT 2 NOMINL MCE/ MXIMUM MX FLOW RTE OBTINBLE 3 /h STNDRD 4 NKVE 15/3 T MCE x 4V 5z 4x3 4x4 4x7.37 MCE3/ NKVE 15/4 T MCE x 4V 5z 4x4 4x5.5 4x1.1 MCE55/ NKVE 15/5 T MCE x 4V 5z 4x4 4x5.5 4x1.1 MCE55/ NKVE 15/6 T MCE x 4V 5z 4x5.5 4x7.5 4x13.1 MCE55/ NKVE 15/7 T MCE x 4V 5z 4x5.5 4x7.5 4x13.1 MCE55/ NKVE 15/8 T MCE x 4V 5z 4x7.5 4x1 4x17.6 MCE11/ NKVE 15/9 T MCE x 4V 5z 4x7.5 4x1 4x17.6 MCE11/ NKVE 15/1 T MCE x 4V 5z 4x11 4x15 4x25.5 MCE11/ B C 1 2 DN DNM CKING DIMENSIONS WEIGT L/ L/B 4 NKVE 15/3 T MCE NKVE 15/4 T MCE NKVE 15/5 T MCE NKVE 15/6 T MCE NKVE 15/7 T MCE NKVE 15/8 T MCE NKVE 15/9 T MCE NKVE 15/1 T MCE DB UMS reserves the right to ake odifications without notice. 42
14 4 NKVE 2 -MCE/ - CONSTNT RESSURE BOOSTER SETS uped liquid teperature range: fro -15 C to +8 C - Maxiu abient teperature: +4 C - Max flow rate: /h ka /1 2/9 2/ Q US gp Q IM gp 5 4 ELECTRONIC RESSURE SETS /7 2/6 2/ / / Q 3 /h Q l/s Q l/in The perforance curves are based on kineatic viscosity values = 1 2 /s and density equal to 1 / 3. Curve tolerance according to ISO 996. Overall perforance taking into account FOUR pups working at the sae tie. UM+INVERTER 2 NOMINL MCE/ MXIMUM MX OWER INUT FLOW RTE OBTINBLE 3 /h STNDRD 4 NKVE 2/3 T MCE x 4V 5z 4x4 4x5.5 4x1.1 MCE55/ NKVE 2/4 T MCE x 4V 5z 4x5.5 4x7.5 4x13.1 MCE55/ NKV 2/5 T MCE x 4V 5z 4x5.5 4x7.5 4x13.1 MCE55/ NKVE 2/6 T MCE x 4V 5z 4x7.5 4x1 4x17.6 MCE11/ NKVE 2/7 T MCE x 4V 5z 4x7.5 4x1 4x17.6 MCE11/ NKVE 2/8 T MCE x 4V 5z 4x11 4x15 4x25.5 MCE11/ NKVE 2/9 T MCE x 4V 5z 4x11 4x15 4x25.5 MCE11/ NKVE 2/1 T MCE x 4V 5z 4x11 4x15 4x25.5 MCE11/ B C 1 2 DN DNM CKING DIMENSIONS WEIGT L/ L/B 4 NKVE 2/3 T MCE NKVE 2/4 T MCE NKVE 2/5 T MCE NKVE 2/6 T MCE NKVE 2/7 T MCE NKVE 2/8 T MCE NKVE 2/9 T MCE NKVE 2/1 T MCE DB UMS reserves the right to ake odifications without notice. 43
15 ELECTRONIC RESSURE SETS 4 NKVE 32 -MCE/ - CONSTNT RESSURE BOOSTER SETS uped liquid teperature range: fro -15 C to +8 C - Maxiu abient teperature: +4 C - Max flow rate: 18 3 /h ka Q US gp /6 Q IM gp DN C B DNM /5 32/5-2 32/4 32/3 32/3-2 32/ Q 3 /h Q l/s 25 3, Q l/in The perforance curves are based on kineatic viscosity values = 1 2 /s and density equal to 1 / 3. Curve tolerance according to ISO 996. Overall perforance taking into account FOUR pups working at the sae tie. UM+INVERTER OWER INUT 2 NOMINL MCE/ MXIMUM FLOW RTE 3 /h MX OBTINBLE STNDRD 4 NKVE 32/2 T MCE 4-5 3x4 5-6z 2x5,5 2x7,5 2x13,1 MCE55/ NKVE 32/3-2 T MCE 4-5 3x4 5-6z 2x5,5 2x7,5 2x13,1 MCE55/ NKVE 32/3 T MCE 4-5 3x4 5-6z 2x7,5 2x1 2x17,6 MCE11/ NKVE 32/4 T MCE 4-5 3x4 5-6z 2x11 2x15 2x25,5 MCE11/ NKVE 32/5-2 T MCE 4-5 3x4 5-6z 2x11 2x15 2x25,5 MCE11/ NKVE 32/5 T MCE 4-5 3x4 5-6z 2x15 2x2 2x34 MCE15/ NKVE 32/6 T MCE 4-5 3x4 5-6z 2x15 2x2 2x34 MCE15/ B C 1 2 DN DNM CKING DIMENSIONS L/ L/B WEIGT 4 NKVE 32/2 T MCE NKVE 32/3-2 T MCE NKVE 32/3 T MCE NKVE 32/4 T MCE NKVE 32/5-2 T MCE NKVE 32/5 T MCE NKVE 32/6 T MCE DB UMS reserves the right to ake odifications without notice. 44
16 4 NKVE 45 -MCE/ - CONSTNT RESSURE BOOSTER SETS uped liquid teperature range: fro -15 C to +8 C - Maxiu abient teperature: +4 C - Max flow rate: 28 3 /h ka Q US gp / Q IM gp 35 3 ELECTRONIC RESSURE SETS DN DNM /3 25 C B /2 45/ Q 3 /h Q l/s Q l/in The perforance curves are based on kineatic viscosity values = 1 2 /s and density equal to 1 / 3. Curve tolerance according to ISO 996. Overall perforance taking into account FOUR pups working at the sae tie. UM+INVERTER OWER INUT 2 NOMINL MCE/ MXIMUM FLOW RTE 3 /h MX OBTINBLE STNDRD 4 NKVE 45/2-2 T MCE 4-5 3x4 5-6z 2x5,5 2x7,5 2x13,1 MCE55/ NKVE 45/2 T MCE 4-5 3x4 5-6z 2x7,5 2x1 2x17,6 MCE11/ NKVE 45/3 T MCE 4-5 3x4 5-6z 2x11 2x15 2x25,5 MCE11/ NKVE 45/4 T MCE 4-5 3x4 5-6z 2x15 2x2 2x34 MCE15/ B C 1 2 DN DNM CKING DIMENSIONS L/ L/B WEIGT 4 NKVE 45/2-2 T MCE NKVE 45/2 T MCE NKVE 45/3 T MCE NKVE 45/4 T MCE DB UMS reserves the right to ake odifications without notice. 45
EUROMAP 46.1. Extrusion Blow Moulding Machines Determination of Machine Related Energy Efficiency Class. Version 1.0, January 2014 13 pages
EUROMAP 46.1 Extrusion Blow Moulding Machines Deterination of Machine Related Energy Efficiency Class Version 1.0, January 2014 13 pages This recoendation was prepared by the Technical Coission of EUROMAP.
More informationTHE INTELLIGENT CHOICE IN COMFORT SINGLE & MULTI TYPE AIR CONDITIONERS
THE INTELLIGENT CHOICE IN COMFORT SINGLE & MULTI TYPE AIR CONDITIONERS Fujitsu General air conditioners are selected and loved by people around the world. P4 P6 ASYB09/12/18LD P9 Today, the full line of
More informationPhysics 211: Lab Oscillations. Simple Harmonic Motion.
Physics 11: Lab Oscillations. Siple Haronic Motion. Reading Assignent: Chapter 15 Introduction: As we learned in class, physical systes will undergo an oscillatory otion, when displaced fro a stable equilibriu.
More informationFresh Thinking in Climate Separation Technology
Contents Cliate Separation Technology 1 Airflow Technology / Energy Efficiency 2 Coputational Fluid Dynaics Control Options / Product Selector 4 Technical & Perforance Data 5-7 Condensing Boiler Range
More information4-WAY BLOW CEILING MOUNTED CASSETTE (600X600mm)
EPLE0-0C -WAY BLOW CEILING MOUNTED CASSETTE (600X600) Daikin air conditioners for shops, restaurants and offices FFQ-B indoor unit FFQ5,5,50,60B infrared reote control (optional) wired reote control (optional)
More informationThe Mathematics of Pumping Water
The Matheatics of Puping Water AECOM Design Build Civil, Mechanical Engineering INTRODUCTION Please observe the conversion of units in calculations throughout this exeplar. In any puping syste, the role
More informationPresentation Safety Legislation and Standards
levels in different discrete levels corresponding for each one to a probability of dangerous failure per hour: > > The table below gives the relationship between the perforance level (PL) and the Safety
More informationChE 203 - Physicochemical Systems Laboratory EXPERIMENT 2: SURFACE TENSION
ChE 203 - Physicocheical Systes Laboratory EXPERIMENT 2: SURFACE TENSION Before the experient: Read the booklet carefully. Be aware of the safety issues. Object To deterine the surface tension of water
More informationA Gas Law And Absolute Zero
A Gas Law And Absolute Zero Equipent safety goggles, DataStudio, gas bulb with pressure gauge, 10 C to +110 C theroeter, 100 C to +50 C theroeter. Caution This experient deals with aterials that are very
More informationA Gas Law And Absolute Zero Lab 11
HB 04-06-05 A Gas Law And Absolute Zero Lab 11 1 A Gas Law And Absolute Zero Lab 11 Equipent safety goggles, SWS, gas bulb with pressure gauge, 10 C to +110 C theroeter, 100 C to +50 C theroeter. Caution
More informationMax. Head (m) LVR3-7-220V 3 32 5 44 0,55 10 50Hz ~ 220 V Oval Flange G1. LVR3-7-380V 3 32 5 44 0,55 10 50Hz ~ 380 V Oval Flange G1
Description NordicFlow s keep the system pressurized during normal conditions and prevent unnecessary activation of the main pump. They have compact design, high efficiency, low noise, reliable sealing
More informationCRN32-2-2 A-F-G-E-HQQE 3x400D 50 HZ
GRUNDFOS DATA BOOKLET CRN32-2-2 A-F-G-E-HQQE 3x4D 5 HZ Grundfos Pump 96122352 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crn32/96122352/crn-32-2-2-a-f-g-e-hqqe.html
More informationsensiq stainless steel The sensiq a spectacular appearance Max. reach: 20 m tangentially Angle of coverage: 300 Angle of aperture: 160
sensiq Motion Detector for Walls and Ceilings sensiq stainless steel The sensiq a spectacular appearance Reference-class infrared wall and ceiling sensor 300 coverage angle with 10 angle of aperture Reach
More informationCRN5-5 A-FGJ-G-E-HQQE 3x230/400 50HZ
GRUNDFOS DATA BOOKLET CRN5-5 A-FGJ-G-E-HQQE 3x23/4 5HZ Grundfos Pump 96517184 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crn5/96517184/crn-5-5-a-fgj-g-e-hqqe.html
More informationELECTRIC SERVO MOTOR EQUATIONS AND TIME CONSTANTS
ELECIC SEO MOO EQUAIONS AND IME CONSANS George W. Younkin, P.E. Life FELLOW IEEE Industrial Controls Consulting, Div. Bulls Eye Marketing, Inc Fond du c, Wisconsin In the analysis of electric servo drive
More information- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL 301 - DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING 401
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 70 204 PERFORMANCE CURVE 90 205 PERFORMANCE CURVE 120 206 PERFORMANCE CURVE 200 207 - CONSTRUCTIONS
More informationHeavy Fuel Oil supply units. The world s best selling HFO supply unit. The right choice for any conditions
The world s best selling supply unit. The right choice for any conditions AB-c arine Compact Heavy Fuel Oil supply unit This series of marine AB-c Heavy Fuel Oil () supply units is developed to combine
More informationLiquid Level Limit Switch liquiphant T FTL 20
Technical Information TI 64F/4/ae Liquid Level Limit Switch liquiphant T FTL 0 Level limit switch for liquids Applications The Liquiphant T FTL 0 is a level limit switch for virtually any kind of fluid
More informationThe conditions below apply to the curves shown on the following pages.
GENERAL INFORMATION STAINLESS STEEL, SILVERLINE, EVERGREEN & GOLDLINE SERIES PERFORMANCE CURVE CONDITIONS The conditions below apply to the curves shown on the following pages. a. The Performance curves
More informationAC VOLTAGE CONTROLLER CIRCUITS (RMS VOLTAGE CONTROLLERS)
AC TAGE CNTRER CRCUT (RM TAGE CNTRER) AC voltage controllers (ac line voltage controllers) are eployed to vary the RM value of the alternating voltage applied to a load circuit by introducing Thyristors
More informationLecture L9 - Linear Impulse and Momentum. Collisions
J. Peraire, S. Widnall 16.07 Dynaics Fall 009 Version.0 Lecture L9 - Linear Ipulse and Moentu. Collisions In this lecture, we will consider the equations that result fro integrating Newton s second law,
More informationCalculation Method for evaluating Solar Assisted Heat Pump Systems in SAP 2009. 15 July 2013
Calculation Method for evaluating Solar Assisted Heat Pup Systes in SAP 2009 15 July 2013 Page 1 of 17 1 Introduction This docuent describes how Solar Assisted Heat Pup Systes are recognised in the National
More informationAnalyzing Methods Study of Outer Loop Current Sharing Control for Paralleled DC/DC Converters
Analyzing Methods Study of Outer Loop Current Sharing Control for Paralleled DC/DC Conerters Yang Qiu, Ming Xu, Jinjun Liu, and Fred C. Lee Center for Power Electroni Systes The Bradley Departent of Electrical
More informationRod Type. Rod Type. Rod Type
RCP2 RCA RCS2 Standard Width RCP2-RA4C Width RCP2-RA6C series Width RCP2-RAC Single-guide Coupling Width RCP2-RGS4C otor Double-guide Coupling Width RCP2-RGS6C Width 5 RCP2-RGDC Width RCP2-RGD4C Width
More informationChapter 5. Principles of Unsteady - State Heat Transfer
Suppleental Material for ransport Process and Separation Process Principles hapter 5 Principles of Unsteady - State Heat ransfer In this chapter, we will study cheical processes where heat transfer is
More informationA CHAOS MODEL OF SUBHARMONIC OSCILLATIONS IN CURRENT MODE PWM BOOST CONVERTERS
A CHAOS MODEL OF SUBHARMONIC OSCILLATIONS IN CURRENT MODE PWM BOOST CONVERTERS Isaac Zafrany and Sa BenYaakov Departent of Electrical and Coputer Engineering BenGurion University of the Negev P. O. Box
More informationABS lifting unit 5 kn
1 597 0503 GB 01.2013 en DE 0- Installation and Operating Instructions Translation fro original instruction www.sulzer.co Installation and Operating Instructions for Lifting device support, shape A (for
More informationSIGMA PUMPY HRANICE CENTRIFUGAL MULTISTAGE HORIZONTAL PUMPS 426 2.98 12.06
SIGMA PUMPY HRANICE CENTRIFUGAL MULTISTAGE HORIZONTAL PUMPS LV SIGMA PUMPY HRANICE, s.r.o. Tovární 605, 753 01 Hranice, Czech Republic tel.: +420 581 661 111, fax: +420 581 602 587 Email: sigmahra@sigmahra.cz
More informationDesign, Manufacturing & Analysis of Differential Crown Gear and Pinion for MFWD Axle
IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE) ISSN(e) : 2278-1684, ISSN(p) : 220 4X, PP : 59-66 www.iosrjournals.org Design, Manufacturing & Analysis of Differential Crown Gear and Pinion
More informationMIRA'S GUIDE TO ELECTRIC SHOWERS
MIRA'S GUIDE TO ELECTRIC SHOWERS SHOWERING PERFECTION ONLINE THIS GUIDE GIVES YOU ALL THE TECHNICAL INFORMATION YOU NEED TO CHOOSE THE RIGHT SHOWER FOR THE JOB. HOWEVER, DON T FORGET THAT OUR WEBSITE IS
More informationRotary screw compressors kw 5,5 7,5 11 15 18,5 22 30 bar 8 10 13 15 MODULO
Rotary screw compressors kw 5,5 7,5 11 15 18,5 22 30 bar 8 10 13 15 MODULO The sum of technology TriAB Air ends The BALMA screw compressors are fitted with the unique TriAB air ends that are designed and
More information2CP. Twin-impeller pumps PERFORMANCE RANGE INSTALLATION AND USE APPLICATION LIMITS OPTIONALS AVAILABLE ON REQUEST CONSTRUCTION AND SAFETY STANDARDS
2CP Twin-impeller pumps PERFORMANCE RANGE Flow rate up to 40 l/min (27 m³/h) Head up to 112 m APPLICATION LIMITS Manometric suction lift up to 7 m Liquid temperature between -10 C and +90 C Ambient temperature
More informationSUPPORTING YOUR HIPAA COMPLIANCE EFFORTS
WHITE PAPER SUPPORTING YOUR HIPAA COMPLIANCE EFFORTS Quanti Solutions. Advancing HIM through Innovation HEALTHCARE SUPPORTING YOUR HIPAA COMPLIANCE EFFORTS Quanti Solutions. Advancing HIM through Innovation
More informationHydro MPC Integrated Pump Systems and HVAC Applications GRUNDFOS HYDRO MPC
Hydro MPC Integrated Pump Systems and HVAC Applications GRUNDFOS HYDRO MPC Advantages of Packaged Systems Grundfos integrated packaged pumping systems are factory-designed for optimized pumping and simplified
More informationA magnetic Rotor to convert vacuum-energy into mechanical energy
A agnetic Rotor to convert vacuu-energy into echanical energy Claus W. Turtur, University of Applied Sciences Braunschweig-Wolfenbüttel Abstract Wolfenbüttel, Mai 21 2008 In previous work it was deonstrated,
More informationFailure Mechanisms in Electronic Products at High Altitudes
Failure Mechaniss in Electronic Products at High Altitudes N. Blattau, and C. Hillan CALCE Electronic Products and Systes Center Building 89, Roo 1103 University of Maryland College Park, MD 20742 Tel.:
More informationCERTIFIED PERFORMANCE
Split Air Conditioners Cooled by air SOC-07 to 0B/ SICH-070 to 0B Ref.: E-TI-SOC-SICH-B-0 Technical information ACCORDING TO ISO 900 STANDARDS ER-08//9 ACCORDING TO ISO 00 STANDARDS CG-97/0 EUROVENT CERTIFIED
More informationSurface Technology. Centrifugal Fan GMD
Centrifugal Fan ATEX classed adapted for paint shops Wide assortment broad area of application Service friendly low maintenance costs Headquarters: Centrifugal Fan Centrifugal Fan is a direct driven industrial
More informationCassette type Indoor Units
2010 Sasung Ceiling Air Conditioners Main Feature Wide Blade Cassette type s WIDE The new cassette type air conditioner is equipped with uniquely designed blades that are wider to provide even cooling
More informationManaging Complex Network Operation with Predictive Analytics
Managing Coplex Network Operation with Predictive Analytics Zhenyu Huang, Pak Chung Wong, Patrick Mackey, Yousu Chen, Jian Ma, Kevin Schneider, and Frank L. Greitzer Pacific Northwest National Laboratory
More informationMulti Air Conditioner SVC MANUAL(Exploded View)
Internal Use nly http://biz.lgservice.co Multi Air Conditioner SVC MANUAL(Exploded View) MDEL : A7UW406FA3[FM40AH UH3] CAUTIN Before Servicing the unit, read the safety precautions in General SVC anual.
More informationABB central inverters PVI-55.0/110.0 - PVI-165.0/220.0 - PVI-275.0/330.0 55 to 330 kw
Solar inverters ABB central inverters PVI-55.0/110.0 - PVI-165.0/220.0 - PVI-275.0/330.0 55 to 330 kw ABB s central inverters are extremely scalable, modular-inverter systems that are based on 55kW modular
More informationHydraulic Control Solutions
Hydraulic Control Solutions Vexve s Hydrox hydraulic control solutions are suitable for even the most challenging installation sites and conditions. Specifically designed for district heating and district
More informationNon-invasive CLAMP-ON ultrasonic flowmeter for liquids
Non-invasive CLAMP-ON ultrasonic flowmeter for liquids Model CU100: non-invasive installation flowmeter, with transducers installed outside the pipe Installation in horizontal or vertical pipe Easy and
More informationThe Velocities of Gas Molecules
he Velocities of Gas Molecules by Flick Colean Departent of Cheistry Wellesley College Wellesley MA 8 Copyright Flick Colean 996 All rights reserved You are welcoe to use this docuent in your own classes
More informationCDX. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page - CONTENTS 100
CONTENTS Page - CONTENTS 100 - SPECIFICATIONS 200 SELECTION CHARTS 201 PERFORMANCE CHART 70 202 PERFORMANCE CHART 90 203 PERFORMANCE CHART 120 204 PERFORMANCE CHART 200 205 - CONSTRUCTIONS 300 SECTIONAL
More informationTurbine Flow Sensor Series VTR
Turbine Flow Sensor Series VTR SIKA Turbine Flow Sensor Series VTR Extra robust, impressively precise SIKA s VTR turbine flow sensor allows you to determine precisely, dependably and easily the flow rates
More informationDoppler effect, moving sources/receivers
Goals: Lecture 29 Chapter 20 Work with a ew iportant characteristics o sound waves. (e.g., Doppler eect) Chapter 21 Recognize standing waves are the superposition o two traveling waves o sae requency Study
More informationHW 2. Q v. kt Step 1: Calculate N using one of two equivalent methods. Problem 4.2. a. To Find:
HW 2 Proble 4.2 a. To Find: Nuber of vacancies per cubic eter at a given teperature. b. Given: T 850 degrees C 1123 K Q v 1.08 ev/ato Density of Fe ( ρ ) 7.65 g/cc Fe toic weight of iron ( c. ssuptions:
More informationUR...3 URX CF...7 URHE CF...11. Heat recovery unit. Heat recovery unit with refrigerant circuit(442-1947 cfm)
UR...3 Heat recovery unit URX CF...7 Heat recovery unit with refrigerant circuit(442-1947 cfm) URHE CF...11 High efficiency heat recovery unit with refrigeration circuit(588-1942 cfm) UR Heat recovery
More informationDesigned for multi-injector endurance testing, the
Designed for multi-injector endurance testing, the ETB Test Bench can optionally provide shot-to-shot mass measurement. The injectors are precisely subject to variable controls and hydraulic pressures
More informationT U R B I N E G A S M E T E R
TURBINE GAS METER TURBINE GAS METER CGT 1 2 3 4 5 6 7 Design and function page 2 General technical data page 3 Measurement outputs page 4 Dimensions and weights page 5 Performance page 7 Pressure loss
More informationINDUSTRIAL DIRECT DRIVEN PISTON COMPRESSORS CL - CH - CK
INDUSTRIAL DIRECT DRIVEN PISTON COMPRESSORS CL - CH - CK CL - CH - CK Direct driven solution for industry Proven technology, solid construction The CL - CH - CK units are directly driven air-cooled, single
More informationHot-Tie Control System Powerware 9315
Hot-Tie Control ystem owerware 9315 The owerware 9315 Hot-Tie Control system is designed to operate with two owerware 9315 Hot-ync Capacity/Redundant ystems. Each system will include two or more owerware
More informationOne-Chip Linear Control IPS, F5106H
One-Chi Linear Control IPS, F5106H NAKAGAWA Sho OE Takatoshi IWAMOTO Motomitsu ABSTRACT In the fi eld of vehicle electrical comonents, the increasing demands for miniaturization, reliability imrovement
More informationOWNER`S MANUAL. Permobil C350. Power Wheelchair
OWNER`S MANUAL UK Perobil C350 Power Wheelchair Where to find Perobil Perobil Europe BV is responsible for the servicing and sales carried out by its iporters and local dealers throughout large parts
More informationEvaluating Inventory Management Performance: a Preliminary Desk-Simulation Study Based on IOC Model
Evaluating Inventory Manageent Perforance: a Preliinary Desk-Siulation Study Based on IOC Model Flora Bernardel, Roberto Panizzolo, and Davide Martinazzo Abstract The focus of this study is on preliinary
More information1 Analysis of heat transfer in a single-phase transformer
Assignent -7 Analysis of heat transr in a single-phase transforer The goal of the first assignent is to study the ipleentation of equivalent circuit ethod (ECM) and finite eleent ethod (FEM) for an electroagnetic
More informationEstimation of mass fraction of residual gases from cylinder pressure data and its application to modeling for SI engine
Journal of Applied Matheatics, Islaic Azad University of Lahijan, Vol.8, No.4(31), Winter 2012, pp 15-28 ISSN 2008-6083 Estiation of ass fraction of residual gases fro cylinder pressure data and its application
More informationThe entec Cross Flow Turbine T15
entec Head Office: St. Gallen - Switzerland Tel: +41 71 228 10 20, Fax: +41 71 228 10 30 E-ail: info@entec.ch -- Web: www.entec.ch The entec Cross Flow Turbine T15 The optial turbine solution for sall
More informationhttp://www.lg.com 20 Yoido-dong, Youngdungpo-gu, Yoido P.O.Box 355 Seoul 150-721, Korea Phone: 82-2-3777-7174 Fax: 82-2-3777-5136
LG Residential ir Conditioners 11 Enjoy Clean, Quiet, and Cofortable ir Conditioning with LG. It s all about cofort in the hoe, and offering you the perfect harony of stylish design and sart technology
More informationExperiment 2 Index of refraction of an unknown liquid --- Abbe Refractometer
Experient Index of refraction of an unknown liquid --- Abbe Refractoeter Principle: The value n ay be written in the for sin ( δ +θ ) n =. θ sin This relation provides us with one or the standard ethods
More informationGE Oil & Gas. Texsteam * Pumps: precise chemical injection pumping
GE Oil & Gas Texsteam * Pumps: precise chemical injection pumping 2 With a wide range of capacities and operating pressures, GE s versatile Texsteam pumps can handle challenging chemical pumping requirements
More informationSIGMA GROUP a. s. Divize průmyslová čerpadla
SIGMA GROUP a. s. Divize průmyslová čerpadla SIGMA GROUP a. s. INDUSTRIAL PUMP DIVISION Jana Sigmunda 79, 783 50 LUTÍN SEWAGE PUMPS NFPH, NFVH, NFJH, NFRH, NFPV, NFVV, NFJV, NFRV, NFPW NFVW Tel.: +420
More informationRefrigeration Compressed Air Dryer Buran Ultrapulse
Refrigeration Compressed Air Dryer Buran Ultrapulse There is more to compressed air than just compressing air Compressed air is an indispensable source of operating and processing power in all areas of
More informationNew Deluxe Wall Mounted Heat Pump Series EXTERIOS
New Deluxe Wall Mounted Heat Pump Series EXTERIOS May 2013 New Deluxe Wall Mounted Heat Pump Series Panasonic Adding New Air Conditioner Lineup Setting Another Mile Stone in the US Ductless Split History
More informationwww.jameco.com 1-800-831-4242
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. 15W Output Switching ower Supply NFM-15 s e ries SECIFICATION MODEL OUTUT
More informationGeneral tolerances for Iinearand angular dimensions and geometrical=.tolerances
oa / - UDC 21 753 1 : 21 7 : 21 9 : 744 43 DEUTSCHE NORM April 1991 General tolerances for Iinearand angular diensions and geoetrical= tolerances (not to be used for new destgns) '-j' ;,, DIN 718 Allgeeintoleranzen
More informationActuator-Sensor-Interface
Selection and ordering data Design Order No. Price Pack 3RX9 307-0AA00 3RX9 307-1AA00 4FD5 213-0AA10-1A 3RX9 305-1AA00 3RX9 306-1AA00 Single output IP 65 current 2.4 A Rated input voltage DC 24 V current
More informationTechnical data. Danfoss DHP-A
Technical data Danfoss DHP-A An air heat pump which produces both heat and hot water Can operate efficiently down to -0 C Danfoss TWS tank gives plenty of hot water quickly and with low operating costs
More informationData Bulletin. Circuit Breaker Characteristic Trip Curves and Coordination Class 0600 TRIP CURVES AND COORDINATION CIRCUIT BREAKER TRIP CURVES
Data Bulletin Bulletin No. 000DB0 August 0 Cedar Rapids, IA, USA Class 000 TRIP CURVES AND COORDINATION CIRCUIT BREAKER TRIP CURVES Thermal Tripping Characteristics agnetic Tripping Characteristics A coordination
More informationANDRITZ Gouda drum dryer Built on solid principles. www.andritz.com/gouda
ANDRITZ Gouda dru dryer Built on solid principles www.andritz.co/gouda The process The ultiate drying dru Products have been dried industrially for ore than a century.since its early years, ANDRITZ Gouda
More information2141-375 Measurement and Instrumentation. Analog Electrical Devices and Measurements
2141-375 Measureent and Instruentation nalog Electrical Devices and Measureents nalog Devices: Current Measureents Force on a conductor I conductor is placed in a unifor agnetic field B T, at an angle
More informationC18 ACERT Fire Pump Tier 3 448 bkw/600 bhp @ 1750 rpm
CATERPILLAR ENGINE SPECIFICATIONS I-6, 4-Stroke-Cycle Diesel Bore...145.0 mm (5.71 in) Stroke...183.0 mm (7.2 in) Displacement... 18.1 L (1,104.53 in3) Aspiration...Turbocharged Aftercooled Compression
More informationAn Innovate Dynamic Load Balancing Algorithm Based on Task
An Innovate Dynaic Load Balancing Algorith Based on Task Classification Hong-bin Wang,,a, Zhi-yi Fang, b, Guan-nan Qu,*,c, Xiao-dan Ren,d College of Coputer Science and Technology, Jilin University, Changchun
More informationPower Supply Systems. Performance guaranteed. Power Supply Systems single-voltage UIC-systems multi-voltage UIC-systems
Power Supply Systems. Performance guaranteed. Power Supply Systems single-voltage UIC-systems multi-voltage UIC-systems Power Supply Components Battery Chargers Inverters and Converters Date: May 2011
More informationPhotovoltaic Solar Energy Unit EESFB
Technical Teaching Equipment Photovoltaic Solar Energy Unit EESFB Products Products range Units 5.-Energy Electronic console PROCESS DIAGRAM AND UNIT ELEMENTS ALLOCATION Worlddidac Member ISO 9000: Quality
More informationKDG3V-5/7/8, 10 Series
Vickers roportional Valves KDG3V-5/7/8, 1 Series Single-Stage with Hydraulic ilot Operation High Flow roportional Directional Control Valves asic Characteristics Max. pressure.......... up to 35 bar (5
More informationyour best best ally Defense Codification and Supply Chain Management Consulting Services Isdefe November, 2013
your best best ally Defense Codification and Supply Chain Manageent Consulting Services Isdefe Noveber, 2013 1. Corporate inforation 1 Corporate inforation Isdefe, is a state-owned copany that offers consulting
More informationFLAT TECHNICAL DATA. HEAT RECOVERY VENTILATION UNITS for RESIDENTIAL BUILDINGS. indoor air quality and energy saving ENERGY CLASS B A A B A A UNIT
indoor air quality and energy saving TECHNICL DT UNIT FLT 1 FLT 2 CONTROL CTR08-PH EVO(D)-PH EVO(D)-PH + CO 2sensor CTR08-PH EVO(D)-PH EVO(D)-PH + CO 2 sensor ENERGY CLSS + C D E F G FLT HET RECOVERY VENTILTION
More informationRATIOMETRIC, LINEAR HALL-EFFECT SENSORS FEATURES V CC. Data Sheet 27501A*
RTIOMETRIC, LINER HLL-EFFECT SENSORS 3503 RTIOMETRIC, LINER HLL EFFECT SENSORS The UGN3503U and UGN3503U Hall-effect sensors accurately track extremely small changes in magnetic flux density changes generally
More informationOUTDOOR DISCONNECTORS A division of ACTOM (Pty) Ltd
OUTDOOR DISCONNECTORS A division of ACTOM (Pty) Ltd ACTOM OUTDOOR DISCONNECTORS Single Side Break (SSB) Disconnector 22-132 kv, 800-1 A, 25 ka - 3s Typical bearing assembly. Voltage range 11 kv to 132
More informationAmplifiers and Superlatives
Aplifiers and Superlatives An Exaination of Aerican Clais for Iproving Linearity and Efficiency By D. T. N. WILLIAMSON and P. J. WALKE ecent articles, particularly in the United States, have shown that
More informationVariable Displacement Pump AA10VSO
Variable Displacement Pump AA10VSO Series 31, Industrial Model, for Open Circuits Axial piston, swashplate design Brueninghaus Hydromatik Sizes 28...140 Nominal pressure 4000 psi Peak pressure 5100 psi
More informationVM, VMC, VMN. Vertical Multistage Centrifugal Pump, 60Hz
VM, VMC, VMN Vertical Multistage Centrifugal Pump, 60Hz Approvals CERTIFICATE IQNet and SQS hereby certify that the organisation Swiss Pump Company AG 3645 Thun-Gwatt Switzerland Whole Company Design,
More informationHigh-Megawatt Converter Technology Workshop for Coal-Gas Based Fuel Cell Power Plants January 24, 2007 at NIST
Session 4a Enjeti 1 High-Megawatt Converter Technology Workshop for Coal-Gas Based Fuel Cell Power Plants January 24, 2007 at NIST Dr. Prasad Enjeti TI TI Professor Power Electronics Laboratory College
More informationSVA SIGMA PUMPY HRANICE SELF PRIMING PUMPS 426 2.98 16.05
SIGMA PUMPY HRANICE SELF PRIMING PUMPS SVA SIGMA PUMPY HRANICE, s.r.o. Tovární 605, 753 01 Hranice, Czech Republic tel.: +40 581 661 111, fax: +40 581 60 587 Email: sigmahra@sigmahra.cz 46.98 16.05 Applications
More informationTechnical Specification. Generating Set with Waukesha engine burning natural gas
Technical Specification Generating Set with Waukesha engine burning natural gas The following presents the Gas Engine Generating Set (GEGS) APG1000 type, based on Waukesha gas engine 16V150LTD. Using the
More informationVertical selfpriming Side-Channel Pumps Type WPV
Vertical selfpriming Side-Channel Pumps Type WPV FIELD OF APPLICATION The side-channel pumps are selfpriming and operate more economically (better efficiency) than normal centrifugal pumps when handling
More informationSolenoid valves 2/2-way direct-operated Type EV210A
Solenoid valves 2/2-way direct-operated Type EV210A Features EV210A NC and NO Very compact valves for industrial application, such as control and dosage For water, oil, compressed air and similar neutral
More informationModeling and model identification of a pressurizer at the Paks Nuclear Power Plant
Modeling and model identification of a pressurizer at the aks Nuclear ower lant István Varga, ábor Szederkényi, Katalin M. Hangos, József Bokor Systems and Control Laboratory Computer and Automation Research
More information4 Alarm and info. Alarm. Yes Warning. No Information No Reset alarms > No Current list > Alarm log list > Delete alarm log > No
6. 6.1 and info (Menu 4) NB are shown in the event of unit faults or irregular operation Check the Current list (Menu 4) for alarm messages and refer to the list of alarms given at the end of these instructions.
More informationAn Improved Decision-making Model of Human Resource Outsourcing Based on Internet Collaboration
International Journal of Hybrid Inforation Technology, pp. 339-350 http://dx.doi.org/10.14257/hit.2016.9.4.28 An Iproved Decision-aking Model of Huan Resource Outsourcing Based on Internet Collaboration
More informationRPT SIGMA PUMPY HRANICE ROTARY LOBE DISPLACEMENT PUMPS 426 2.98 23.01
SIGMA PUMPY HRANICE ROTARY LOBE DISPLACEMENT PUMPS RPT SIGMA PUMPY HRANICE, s.r.o. Tovární 605, 753 01 Hranice, Czech Republic tel.: +4 581 661 111, fax: +4 581 602 587 Email: sigmahra@sigmahra.cz 426
More informationPower consumption (kw)
OS Series Series description LIT OS systems are applied to wastewater disinfection. The models of this series were developed on base of high-efficiency low-pressure amalgam lamps and have all components
More informationCooking at the Speed of light!
Cooking at the Infrared Cooking & Colouring Infrabaker is a modular infrared continuous cooking system developed by Infrabaker International. The machine is designed to cook and/or put colour on a wide
More informationTECHNICAL BROCHURE BAQUABII. * Available up to 100 GPM systems. Aquavar ABII VARIABLE SPEED CONSTANT PRESSURE SYSTEMS
TECHNICAL BROCHURE BAQUABII * Available up to 1 GPM systems Aquavar ABII VARIABLE SPEED CONSTANT PRESSURE SYSTEMS FEATURES The AB2 variable speed pump controller and complete booster package kits, provide
More informationAnswer: Same magnitude total momentum in both situations.
Page 1 of 9 CTP-1. In which situation is the agnitude of the total oentu the largest? A) Situation I has larger total oentu B) Situation II C) Sae agnitude total oentu in both situations. I: v 2 (rest)
More informationPREDICTION OF MILKLINE FILL AND TRANSITION FROM STRATIFIED TO SLUG FLOW
PREDICTION OF MILKLINE FILL AND TRANSITION FROM STRATIFIED TO SLUG FLOW ABSTRACT: by Douglas J. Reineann, Ph.D. Assistant Professor of Agricultural Engineering and Graee A. Mein, Ph.D. Visiting Professor
More informationResearch Article Performance Evaluation of Human Resource Outsourcing in Food Processing Enterprises
Advance Journal of Food Science and Technology 9(2): 964-969, 205 ISSN: 2042-4868; e-issn: 2042-4876 205 Maxwell Scientific Publication Corp. Subitted: August 0, 205 Accepted: Septeber 3, 205 Published:
More information