Tape and Reel Specification for Integrated Circuits
|
|
|
- Alaina Russell
- 7 years ago
- Views:
Transcription
1 Tape and Reel Specification for Integrated Circuits Introduction Many Surface Mounted Devices (SMDs) are being packaged for shipment in embossed tape and wound onto reels. The Intersil tape and reel specifications are in compliance with Electronics Industries Association (EIA) standards for Embossed Carrier Taping of Surface Mount Components for Automatic Handling. EIA-481 for the , 12, 16, 24, 32, 44 and 56mm Wide Tape (Except the orientation of square package) Intersil now supplies many different SMDs in tape and reel, as shown in Table 1. TABLE 1. PACKAGE AND TAPE SPECIFICATIONS REEL AND TRAILER A LEADER B POCKET TAPE PACKAGE TYPE # OF LEADS NOMINAL PACKAGE SIZE UNITS PER REEL HUB SIZE (Note 3) POCKETS LENGTH POCKETS LENGTH WIDTH PITCH (P1) xxxxxxx-t7a Note 4 Note 5 Note 5 Note 5 Note 5 Note 5 Note 5 Note 5 xxxxxxx-t7 Note 4 Note 5 Note 5 Note 5 Note 5 Note 5 Note 5 Note 5 Note 5 SOIC(N) (SOPN) x0.194" 0/1000/ SOIC(N) (SOPN) x0.342" 0/1000/ SOIC(N) (SOPN) x0.391" 0/1000/ SOIC(W) (SOPW) SOIC(W) (SOPW) SOIC(W) (SOPW) SOIC(W) (SOPW) SOIC(W) (SOPW) (or EPSOIC) x0.407" 1,000/ 13&4/ mm mm 16mm 12mm x0.456" 1,000 13& mm mm 24mm 12mm x0.506" 1,000 13& mm mm 24mm 12mm x0.606" 1,000 13& mm mm 24mm 12mm x0.706" 1,000 13& mm mm 24mm 12mm EIAJ SOIC x0.217" 2,500 13&4 MSOP 8/10 3.0x3.0mm 0/1000/ TSSOP 8 4.4x3.0mm 0/1000/ TSSOP (or EPTSSOP) 14/16 4.4x5.0mm 0/1000/ TSSOP (Custom) 14/16 4.4x5.0mm 0/1000/ TSSOP x6.5mm 0/1000/ TSSOP (or EPTSSOP) x7.8mm 0/1000/ TB CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures. Copyright Intersil Americas LLC , All Rights Reserved INTERSIL or Intersil (and design) is a trademark owned by Intersil Corporation or one of its subsidiaries. All other trademarks mentioned are the property of their respective owners.
2 PACKAGE TYPE TSSOP (or EPTSSOP) # OF LEADS NOMINAL PACKAGE SIZE 28/38 4.4x9.7mm 0/1000/ TSSOP x6.1mm & mm mm 24mm 12mm QSOP (SSOP) x0.194" 0/1000/ QSOP (SSOP) 20/ x0.342" 0/1000/ QSOP (SSOP) x0.391" 0/1000/ TABLE 1. PACKAGE AND TAPE SPECIFICATIONS (Continued) UNITS PER REEL REEL AND HUB SIZE (Note 3) TRAILER A LEADER B POCKET TAPE PITCH POCKETS LENGTH POCKETS LENGTH WIDTH (P1) SSOP x0.244" 1,000/ 13&4/ mm mm 16mm 12mm SSOP x0.284" 1,000/ 13&4/ mm mm 16mm 12mm SSOP x0.323" 1,000/ 13&4/ mm mm 16mm 12mm SSOP x0.402" 1,000 13& mm mm 24mm 12mm PLCC x0.350" 1,000 13& mm mm 16mm 12mm PLCC x0.450" & mm mm 24mm 16mm PLCC x0.550" & mm mm 24mm 16mm PLCC x0.650" & mm mm 32mm 24mm PLCC x0.950" 13& mm mm 44mm 32mm PLCC x1.150" & mm mm 44mm 36mm TQFP 32 5x5x1.0mm 2,000/ &6/13& mm mm 16mm 12mm TQFP/EPAD TQFP 32/48 7x7x1.0mm 1,000 13& mm mm 16mm 12mm TQFP/EPAD 64/44 10x10x1.0mm 1,000 13& mm mm 24mm 16mm TQFP 64/44 10x10x1.0mm 1,000 13& mm mm 24mm 16mm TQFP 80 14x14x1.0mm 1,000 13& mm mm 24mm 24mm TQFP (Note 6) 80 12x12x1.0mm 1,000 13& mm mm 24mm 24mm TQFP x12x10mm & mm mm 24mm 24mm LQFP 48 7x7x1.4mm 1,000 13& mm mm 16mm 12mm LQFP 80 10x10x1.4mm 1,000 13& mm mm 24mm 16mm LQFP 80 14x14x1.4mm & mm mm 32mm 24mm LQFP x20x1.4mm & mm mm 44mm 24mm LQFP (Note 6) x20x1.4mm & mm mm 44mm 24mm LQFP (or PQLQP) x20x1.4mm & mm mm 44mm 32mm LQFP x24x1.4mm & mm mm 44mm 32mm LQFP x28x1.4mm & mm mm 44mm 36mm MQFP 44 10x10x2.0mm & mm mm 24mm 24mm MQFP 80 14x20x2.7mm & mm mm 44mm 24mm QFP x20x2.72mm & mm mm 44mm 24mm PBGA (fbga) 160/196 12x12x1.4mm 1,000 13& mm mm 24mm 16mm PBGA (fbga) x14x1.32mm 1,000 13& mm mm 24mm 24mm PBGA (fbga) x15x1.4mm & mm mm 24mm 24mm PBGA (fbga) 256/316 17x17x1.4mm & mm mm 24mm 24mm TFBGA (Note 6) 144 7x7x1.2mm 0 13& mm mm 16mm 12mm TFBGA (Note 6) 144 7x7x1.3mm 0 13& mm mm 16mm 12mm TDFN Note 4 1.6x1.6x 1000/ / 2 TB347.28
3 PACKAGE TYPE # OF LEADS NOMINAL PACKAGE SIZE TDFN Note 4 2.0x2.0x 1000/ / TDFN Note 4 2.0x2.0x &4 (13 Packing) TDFN Note 4 2x3x 6000/1000/ TDFN Note 4 3x3x 6000/1000/ TDFN Note 4 4x3x 6000/1000/ TDFN Note 4 4x4x 6000/1000/ TDFN Note 4 5x3x 4,000/1000/ 13&4 /13&4/ 13&4 /13&4/ 13&4 /13&4/ 13&4 /13&4/ 13&4 /13&4/ DFN Note 4 2x2x0.9mm 6,000/ 13&4/ DFN Note 4 2x3x0.9mm 6,000/1000/ DFN Note 4 3x3x0.9mm 6000/1000/ DFN Note 4 4x3x0.9mm 6000/1000/ DFN Note 4 4x4x0.9mm 6000/1000/ DFN Note 4 4x5.5x1.3mm 4,000/1000/ DFN Note 4 5x3x0.9mm 4,000/1000/ QFN/TQFN Note 4 3x3x0.9/ 6000/1000/ QFN (Note 7) Note 4 3x3x0.9mm 6000/1000/ mm mm 12mm 8mm QFN (Note 8) Note 4 3x3x0.9mm 1000/100 QFN/TQFN Note 4 3x4x0.9/ QFN/TQFN Note 4 3.5x3.5x0.9/ QFN/TQFN Note 4 4x4x0.9/ QFN/TQFN Note 4 4x5x0.9/ QFN/TQFN Note 4 4x6x0.9/ 6000/1000/ 6000/1000/ 6000/1000/ 6000/1000/ 4,000/1000/ mm mm 16mm 12mm QFN (Note 8) Note 4 4x7x0.9mm 1000/ 100 / QFN/TQFN Note 4 5x5x0.9/ 6000/1000/ QFN (Note 7) Note 4 5x5x0.9mm 6000/1000/ 100 QFN/TQFN Note 4 5x7x0.9/ 0/1000/ QFN 32 5x6x0.9mm 6000/0/ 1000 TABLE 1. PACKAGE AND TAPE SPECIFICATIONS (Continued) UNITS PER REEL REEL AND HUB SIZE (Note 3) TRAILER A LEADER B POCKET TAPE PITCH POCKETS LENGTH POCKETS LENGTH WIDTH (P1) mm mm 16mm 8mm mm mm 12mm 8mm 3 TB347.28
4 PACKAGE TYPE # OF LEADS NOMINAL PACKAGE SIZE QFN/TQFN Note 4 5x10x0.9/ QFN/TQFN Note 4 6x4x0.9/ QFN/TQFN Note 4 6x6x0.9/ 4,000/ &4/13& mm mm 24mm 12mm 4000/1000/ 4000/1000/ mm mm 16mm 12mm mm mm 16mm 12mm QFN (Note 7) Note 4 6x6x0.9mm 1000/100 13&4/ mm mm 16mm 12mm QFN/TQFN Note 4 7x7x0.9/ 4,000/1000/ mm mm 16mm 12mm QFN (Note 6) Note 4 7x7x0.9mm 3,000 13& mm mm 16mm 12mm QFN/TQFN Note 4 8x8x0.9/ QFN/TQFN Note 4 9x9x0.9/ QFN/TQFN Note 4 10x10x0.9/ QFN/HDA Note 4 15x15x3.5/ 2.2mm TABLE 1. PACKAGE AND TAPE SPECIFICATIONS (Continued) UNITS PER REEL 4,000/1000/ 4,000/1000/ 3,000/1000/ REEL AND HUB SIZE (Note 3) TRAILER A LEADER B POCKET TAPE PITCH POCKETS LENGTH POCKETS LENGTH WIDTH (P1) mm mm 16mm 12mm mm mm 16mm 12mm mm mm 24mm 16mm & mm mm 24mm 20mm QFN/HDA Note 4 15x15x3.6mm & mm mm 24mm 20mm QFN/HDA 26 17x17x7.5mm 13& mm mm 24mm 24mm (Punch QFN) QFN/HDA x11.45x2.5mm & mm mm 24mm 20mm QFN/HDA x19.0x3.55mm & mm mm 32mm 24mm QFN/HDA 42/ x23.0x7.5mm & mm mm 32mm 24mm X2QFN 28 4x5x0.38mm &4 aqfn 69 5x5x0.85mm 1000/100 / WFQFN x6.0x0.85mm 4000/ &4/13& mm mm 16mm 12mm MO-169 (TO-262) 3/ x0.415" & mm mm 24mm 16mm SOT x0.115" 3000/1000 / mm mm 8mm 4mm SOT-23 5/6/ x0.115" 3000/1000 / 63 mm mm 8mm 4mm SC x0.079" 3000/1000 / mm mm 8mm 4mm SC70 5/ x0.079" 3000/1000 / mm mm 8mm 4mm WLCSP x0.98mm 3,000/1000 / mm mm 8mm 4mm WLCSP x0.8mm 3,000/1000 / mm mm 8mm 4mm WLCSP x0.865mm 3,000/1000 / mm mm 8mm 4mm WLCSP 6 1.0x1.5mm 3,000/1000 / mm mm 8mm 4mm WLCSP x1.45mm 3,000/1000 / mm mm 8mm 4mm WLCSP x1.54mm 3,000/1000 / mm mm 8mm 4mm WLCSP x1.41mm 3,000/1000 / mm mm 8mm 4mm WLCSP x1.425mm 3,000/1000 / mm mm 8mm 4mm WLCSP x1.98mm 3,000/1000 / mm mm 8mm 4mm WLCSP x1.69mm 3,000/1000 / mm mm 8mm 4mm WLCSP x1.30mm 3,000/1000 / mm mm 8mm 4mm WLCSP x2.15mm 3,000/1000 / mm mm 8mm 4mm WLCSP x1.655mm 3,000/1000 / mm mm 8mm 4mm WLCSP x1.74mm 3,000/1000 / mm mm 8mm 4mm 4 TB347.28
5 PACKAGE TYPE # OF LEADS NOMINAL PACKAGE SIZE WLCSP x1.78mm 3,000/1000 / mm mm 8mm 4mm WLCSP x2.16mm 3,000/1000 / mm mm 8mm 4mm WLCSP x2.05mm 3,000/1000 / mm mm 8mm 4mm WLCSP x2.335mm 3,000/1000 / mm mm 12mm 4mm WLCSP x2.15mm 3,000/1000 / mm mm 12mm 4mm WLCSP x2.15mm 3,000/1000 / mm mm 8mm 4mm WLCSP x1.67mm 3,000/1000 / mm mm 8mm 4mm WLCSP 20/ x2.40mm 3,000/1000 / mm mm 8mm 4mm WLCSP x2.13mm 3,000/1000 / mm mm 8mm 4mm WLCSP x2.11mm 3,000/1000 / mm mm 8mm 4mm WLCSP x2.64mm 3,000/1000 / mm mm 8mm 4mm WLCSP x2.07mm 3,000/1000 / mm mm 8mm 4mm WLCSP x2.64mm 3,000/1000 / mm mm 8mm 4mm WLCSP x2.185mm 3,000/1000 / mm mm 12mm 4mm WLCSP (8mm) x2.61mm 3,000/1000 / mm mm 8mm 4mm WLCSP x2.61mm 3,000/1000 / mm mm 12mm 4mm WLCSP x2.88mm 3,000/1000 / mm mm 8mm 4mm WLCSP x2.53mm 3,000/1000 / mm mm 8mm 4mm WLCSP x2.06m 3, mm mm 12mm 4mm WLCSP x2.01mm 3,000/1000 / 2000mm mm 12mm 8mm WLCSP x3.20mm 3,000 13/4 2000mm mm 12mm 8mm WLCSP x3.31mm 3,000/1000 / mm mm 12mm 4mm WLCSP x3.21mm /4 2000mm mm 12mm 8mm WLCSP x3.37mm /4 2000mm mm 12mm 8mm WLCSP x4.0025mm &4 2000mm mm 12mm 8mm WLCSP x4.04mm 3000/ &4/ 2000mm mm 12mm 8mm WLCSP x3.67mm /4 2000mm mm 12mm 8mm WLCSP x4.50mm /4 2000mm mm 12mm 8mm WLCSP x5.540mm /4 2000mm mm 12mm 8mm OCSP x2.13mm 2,500 / mm mm 8mm 4mm µtdfn 6 1.2x1.0x0.50mm 3,000/1000/ µtdfn 6 1.6x1.6x0.50mm 3,000/1000/ µtdfn 8 2.0x2.0x0.50mm 3,000/1000/ µtqfn 8 1.4x1.2x0.50mm 3,000/1000/ µtqfn x1.4x0.50mm 3,000/1000/ µtqfn x1.6x0.50mm 3,000/1000/ µtqfn x1.4x0.50mm 3,000/1000/ µtqfn x1.8x0.50mm 3,000/1000/ TABLE 1. PACKAGE AND TAPE SPECIFICATIONS (Continued) UNITS PER REEL REEL AND HUB SIZE (Note 3) / / / / / / / / / / / / / / / / TRAILER A LEADER B POCKET TAPE PITCH POCKETS LENGTH POCKETS LENGTH WIDTH (P1) 5 TB347.28
6 PACKAGE TYPE # OF LEADS NOMINAL PACKAGE SIZE µtqfn x1.8x0.50mm 3,000/1000/ ODFN 4 1.5x1.5x0.70mm 3,000/1000/ ODFN x1.25x1.0mm 3,000/1000/ ODFN 6 1.5x1.6x0.70mm 3,000/1000/ ODFN 5/6/8 2.0x2.1x0.70mm 3,000/1000/ TABLE 1. PACKAGE AND TAPE SPECIFICATIONS (Continued) UNITS PER REEL REEL AND HUB SIZE (Note 3) / / / / / / / / / / TRAILER A LEADER B POCKET TAPE PITCH POCKETS LENGTH POCKETS LENGTH WIDTH (P1) mm mm 8mm 4mm mm mm 8mm 4mm mm mm 8mm 4mm mm mm 8mm 4mm ODFN x3.5x0.65mm 1,000/ / mm mm 12mm 4mm ODFN 8 3.0x3.0x0.70mm 1,000/ / mm mm 8mm 4mm ODFN x2.94x 1.35mm 1,000/ / mm mm 12mm 8mm NOTES: 1. Pocket count and trailer and leader lengths are nominal counts/dimensions. 2. Package size in inches (unless otherwise indicated). 3. Reel and hub size; Example: 13&4 = 13 inch reel with 4 inch hub. 4. Multiple lead counts. 5. Dependent upon the specific package type. Reference specific package type and number of leads in Table 1 for additional information. 6. Products starting with TW 7. Products starting with ZL 8. Products starting with Q 6 TB347.28
7 General Information The Intersil tape and reel packing system protects the product from mechanical and electrical damage and is designed for automatic pick-and-place equipment. The tape and reel packing system consists of a pocket carrier tape sealed with a protective cover tape to hold the devices in place. The devices are loaded with leads down, into the carrier pockets. The tape is wound onto a plastic reel for labeling and packing for shipment. All tape sizes are supplied on 7inch and 13inch diameter reels. The conductive carrier tape and antistatic coated transparent cover tape and reel, provide ESD protection. Information labels, ESD labels and barcode labels (if required) are placed on each reel. Transparent cover tape allows device verification and brand inspection without having to remove or handle components. No more than 2 date codes will be combined on any one reel. ANY ADDITIONAL LABEL (IF REQUIRED) ESD CAUTION NOTE: LABELS TO BE PLACED ON THE REEL OPPOSITE THE ROUND (TAPE) SPROCKET HOLES. WAREHOUSE LABEL IF REQUIRED TOP COVER TAPE BARCODE LABEL IF REQUIRED SPROCKET HOLE (ROUND) CARRIER TAPE EMBOSSED CAVITY FIGURE 1. TAPE/REEL AND LABEL INFORMATION END CARRIER TAPE COVER TAPE START COVER TAPE TRAILER COMPONENTS LEADER POCKETS AND LENGTH A POCKETS AND LENGTH B FIGURE 2. TAPE LEADER AND TRAILER 7 TB347.28
8 Materials and Design Carrier Tape The pocketed carrier tape is made of conductive polystyrene plus carbon material (or equivalent). The surface resistivity is 10 6 Ω/sq. maximum. Pocket tapes are designed in such a manner that the components remain in position for automatic handling after the removal of the cover tape. Each pocket has a hole in the center for automated sensing of whether or not the pocket is occupied, thus facilitating device removal. Sprocket holes along the edge of the carrier tape enable direct feeding into automated board assembly equipment. See Figures 3 and 4 for Carrier Tape dimensions. Cover Tape The cover tape is made of antistatic transparent polyester film. The surface resistivity is less than Ω/sq. maximum. The cover tape is heat-sealed or pressure sealed to the edges of the carrier tape to encase the devices in the pockets. The force to peel back the cover tape from the carrier tape shall be a mean value of 30gm to 80gm (0.3N to 0.8N). Reel The device loading orientation is in compliance with EIA-481 (see Figure 5). The loaded carrier tape is wound onto a reel that is uniformly sized for all packages, (see Figure 6). The reel is made of antistatic high impact polystyrene. The surface resistivity is less than Ω/sq. maximum. T DO P2 PO EMBOSSMENT E1 Ao F B1 Ko Bo E2 W CENTER LINES OF CAVITY P1 D1 FIGURE 3. CONFIGURATION DRAWING FOR 8, 12, 16, 24MM POCKET TAPE W (NOMINAL) TAPE WIDTH B1 (MAXIMUM) (Note 14) F (NOMINAL) E2 (MINIMUM) 8mm (0.315) 4.35 (0.171) 3.5 (0.138) 6.25 (0.246) 12mm (0.472) 8.2 (0.323) 5.5 (0.217) (0.404) 16mm (0.629) 12.1 (0.476) 7.5 (0.295) (0.561) 24mm (0.945) 20.1 (0.791) 11.5 (0.453) (0.876) NOTES: 9. Dimensions are in millimeters and are nominal unless otherwise indicated (inches are in brackets for reference only). 10. T dimension, nominal 0.30 or P1 cavity pitch is 4.0mm minimum and increases in 4.0mm increments depending on package size (see Table 1). 12. P0 dimension is 4.0mm. 13. P2 dimension is 2.0mm. 14. B1 actual dimension is determined by package size. 15. D1 diameter is 1.5mm minimum. 16. Do diameter is 1.5mm. 17. E1 dimension is 1.75mm. 18. Ao, Bo, Ko dimensions determined by component size. 8 TB347.28
9 Do P2 PO E1 T Ao F B1 Ko Bo W SO 0.05(0.002) MAX P1 D1 0.20(.008) DO/2 FIGURE 4. CONFIGURATION DRAWING FOR 32MM AND 44MM POCKET TAPE W (NOMINAL) TAPE WIDTH B1 (MAXIMUM) (Note 24) F (NOMINAL) SO (NOMINAL) 32mm (1.260) 23.0 (0.906) 14.2 (0.559) 28.4 (1.118) 44mm (1.732) 35.0 (1.378) 20.2 (0.795) 40.4 (1.591) NOTES: 19. Dimensions are in millimeters and are nominal unless otherwise indicated (inches are in brackets for reference only). 20. T dimension, nominal 0.30 or P1 cavity pitch is 8.0mm minimum and increases in 4.0mm increments depending on package size (see Table 1). 22. P0 dimension is 4.0mm. 23. P2 dimension is 2.0mm. 24. B1 actual dimension is determined by package size. 25. D1 diameter is 2.0mm minimum. 26. Do diameter is 1.5mm. 27. E1 dimension is 1.75mm. 28. Ao, Bo, Ko dimensions determined by component size. 9 TB347.28
10 FIGURE 5A. SQUARE - BGA, QFN, DFN, ODFN AND CSP FIGURE 5B. RECTANGULAR - QFN, ODFN AND DFN FIGURE 5C. PLCC 10 TB347.28
11 FIGURE 5D. SQUARE - MQFP, TQFP AND LQFP FIGURE 5E. RECTANGULAR - MQFP, TQFP AND LQFP FIGURE 5F. SOIC, MSOP, TSSOP, QSOP AND PSOP 11 TB347.28
12 PIN 1 FIGURE 5G. SOT-23 AND SC-70 FIGURE 5H. MO-169 FIGURE 5I. SQUARE CSP 12 TB347.28
13 NOTE: THE BUMPS (BALLS) ARE FACING DOWN IN THE POCKET MAY BE APPLICABLE ONLY FOR PRODUCTS BEFORE MAY 01, 2008 FIGURE 5J. RECTANGULAR - CSP NOTE: ALL NEW PRODUCTS WILL FOLLOW THIS A1 (PIN 1) ORIENTATION EFFECTIVE DATE: MAY 01, 2008 FIGURE 5K. RECTANGULAR - CSP NOTE: SPECIFICALLY FOR 8 BUMP 1.40x1.20mm CSP FIGURE 5L. RECTANGULAR - CSP NOTE: ALL NEW PRODUCTS WILL FOLLOW THIS A1 (PIN 1) ORIENTATION EFFECTIVE DATE: MAY 01, 2008 FIGURE 5M. RECTANGULAR - HDA FIGURE 5. MECHANICAL POLARIZATION DIAGRAMS 13 TB347.28
14 EMBOSSED OR MOLDED RECYCLE SYMBOL (EXAMPLE) 40(1.575) MIN. ACCESS HOLE AT SLOT LOCATION W3 INCLUDES FLANGE DISTORTION AT OUTER EDGE 1.5(0.059) MIN W1 MEASURED AT HUB 330mm (13.00) OR 178mm (7.00) 20.2 (0.795) MIN ARBOR HOLE 13.0(0.512) DIA. HUB DIAMETER FULL RADIUS W2 MEASURED AT HUB TAPE SLOT IN CORE FOR TAPE START 2.5(0.098) MIN. WIDTH 10(0.394) MIN. DEPTH FIGURE 6. REEL DIMENSIONS TAPE WIDTH W1 (NOMINAL) W2 (MAXIMUM) W3 (MAXIMUM) 8mm (0.315) 8.4 (0.331) 14.4 (0.567) 10.9 (0.429) 12mm (0.472) 12.4 (0.488) 18.4 (0.724) 15.4 (0.606) 16mm (0.629) 16.4 (0.646) 22.4 (0.882) 19.4 (0.764) 24mm (0.945) 24.4 (0.961) 30.4 (1.197) 27.4 (1.079) 32mm (1.260) 32.4 (1.276) 38.4 (1.512) 35.4 (1.394) 44mm (1.732) 44.4 (1.748) 50.4 (1.984) 47.4 (1.866) NOTE: 29. Dimensions are in millimeters (inches are in brackets for reference only). Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time without notice. Accordingly, the reader is cautioned to verify that the document is current before proceeding. For information regarding Intersil Corporation and its products, see 14 TB347.28
TAPE AND REEL. Tape and Reel Specifications Surface Mount
Tape and Reel Packing Tape and reel packing is available for all SO, TSOT (thin SOT- 23), SOT-23 3L/4L, SOT-223, SSOP, TSSOP, QFN, DFN and DD packages in accordance with EIA Specification 481-D with the
Handling Freescale Pressure Sensors
Freescale Semiconductor Application Note Rev 3, 11/2006 Handling Freescale Pressure by: William McDonald INTRODUCTION Smaller package outlines and higher board densities require the need for automated
6L'< PP ÃXQLWV 'LHÃDQGÃPDQXIDFWXULQJÃVRXUFHÃVXEMHFWÃWRÃFKDQJHÃZLWKRXWÃSULRUÃQRWLILFDWLRQ
0.050 Ω 0.090 Ω ÃÃÃÃÃÃÃ7$ R &ÃXQOHVVÃRWKHUZLVHÃQRWHG 9 '66 'UDLQ6RXUFHÃ9ROWDJH 9 9 *66 *DWH6RXUFHÃ9ROWDJH ± 9, ' 'UDLQÃ&XUUHQW Ã&RQWLQXRXVÃ ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ1RWHÃD $ 3 ' Ã3XOVHG 3RZHUÃ'LVVLSDWLRQÃIRUÃ'XDOÃ2SHUDWLRQÃÃÃÃÃÃÃÃÃÃÃÃÃÃ1RWHÃD
TN0991 Technical note
Technical note Description of WLCSP for STMicroelectronics EEPROMs and recommendations for use Introduction This document describes the 5 and 8-bump WLCSPs (wafer level chip size package) used for STMicroelectronics
Si9953DY* Dual P-Channel Enhancement Mode MOSFET 9 '66 'UDLQ6RXUFHÃ9ROWDJH 9 9 *66 *DWH6RXUFHÃ9ROWDJH ± 9 Ã3XOVHG 3 '
Si9953DY* Dual P-Channel Enhancement Mode MOSFET 0.250 Ω 0.400 Ω ÃÃÃÃÃÃÃ7 $ R &ÃXQOHVVÃRWKHUZLVHÃQRWHG 9 '66 'UDLQ6RXUFHÃ9ROWDJH 9 9 *66 *DWH6RXUFHÃ9ROWDJH ± 9, ' 'UDLQÃ&XUUHQW Ã&RQWLQXRXVÃ ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ1RWHÃD
SURFACE MOUNT NOMENCLATURE AND PACKAGING
SURFACE MOUNT NOMENCLATURE AND PACKAGING Tel 800-776-9888 Email info@topline.tv w w w. t o p l i n e. t v Contents Overview... 3 Flat Chip... 4 MELF Components...10 Tantalum Capacitors.... 12 Transistors
CLA4607-085LF: Surface Mount Limiter Diode
DATA SHEET CLA4607-085LF: Surface Mount Limiter Diode Applications Low-loss, high-power limiters Receiver protectors Anode (Pin 1) Anode (Pin 3) Features Low thermal resistance: 55 C/W Typical threshold
SLG7NT4129 PCIE RTD3. Pin Configuration. Features Low Power Consumption Dynamic Supply Voltage RoHS Compliant / Halogen-Free Pb-Free TDFN-12 Package
General Description Silego SLG7NT4129 is a low power and small form device. The SoC is housed in a 2.5mm x 2.5mm TDFN package which is optimal for using with small devices. Features Low Power Consumption
Reel pack, SMD, 7" Q1/T1-Q2/T3 standard product orientation Orderable part number ending,115 or X Ordering code (12NC) ending 115.
Rev. 1 18 February 2015 Packing information 1. Packing method Printed plano box Barcode label Reel Tape QA Seal Preprinted ESD warning Circular sprocket holes opposite the label side of reel PQ-label (permanent)
PCB Assembly Guidelines for Intersil Wafer Level Chip Scale Package Devices
Assembly Guidelines for Intersil Wafer Level Chip Scale Package Devices Introduction There is an industry-wide trend towards using the smallest package possible for a given pin count. This is driven primarily
SKY13370-374LF: 0.5 to 6.0 GHz SPDT Switch, 50 Ω Terminated
DATA SHEET SKY13370-374LF: 0.5 to 6.0 GHz SPDT Switch, 50 Ω Terminated Applications WiMAX 802.16 RF1 RF2 Dual-band WLANs (802.11 a/b/g/n) LTE/4G systems 50 Ω 50 Ω Features 50 Ω matched RF ports in all
Suggested PCB Land Pattern Designs for Leaded and Leadless Packages, and Surface Mount Guidelines for Leadless Packages
APPLICATION NOTE Suggested PCB Land Pattern Designs for Leaded and Leadless Packages, and Surface Mount Guidelines for Leadless Packages Introduction This Application Note provides sample PCB land pattern
Preface xiii Introduction xv 1 Planning for surface mount design General electronic products 3 Dedicated service electronic products 3 High-reliability electronic products 4 Defining the environmental
PACKAGE QUALIFICATION SUMMARY REPORT
PACKAGE QUALIFICATION SUMMARY REPORT Document Control #: Purpose: Device: Mask Identification #: Process Technology: Product: To provide qualification summary report for all packages Various Various Pure
NBB-402. RoHS Compliant & Pb-Free Product. Typical Applications
Typical Applications Narrow and Broadband Commercial and Military Radio Designs Linear and Saturated Amplifiers 0 RoHS Compliant & Pb-Free Product NBB-402 CASCADABLE BROADBAND GaAs MMIC AMPLIFIER DC TO
SOT618-7. 1. Packing method
Rev. 2 10 April 2015 Packing information 1. Packing method Fig 1. Reel dry pack for SMD Table 1. Reel dimensions d w [1] 2. Product orientation Dimensions and quantities SPQ/PQ (pcs) [2] Reels per box
Three Channel Optical Incremental Encoder Modules Technical Data
Three Channel Optical Incremental Encoder Modules Technical Data HEDS-9040 HEDS-9140 Features Two Channel Quadrature Output with Index Pulse Resolution Up to 2000 CPR Counts Per Revolution Low Cost Easy
SKYA21012: 20 MHz to 6.0 GHz GaAs SPDT Switch
DATA SHEET SKYA2112: 2 MHz to 6. GHz GaAs SPDT Switch Automotive Applications INPUT Infotainment Automated toll systems Output1 Output2 Garage door opener 82.11 b/g/n WLAN, Bluetooth systems Wireless control
The Universal PCB Design Grid System
The Universal PCB Design Grid System Abstract: Mixing PCB Design Layout units will compromise perfection every time. PCB Design perfection starts with building CAD library parts and quickly moves to part
SM712 Series 600W Asymmetrical TVS Diode Array
SM712 Series 6W Asymmetrical TVS Diode Array RoHS Pb GREEN Description The SM712 TVS Diode Array is designed to protect RS-485 applications with asymmetrical working voltages (-7V to from damage due to
Spread Spectrum Clock Generator
Spread Spectrum Clock Generator DESCRIPTION is a clock generator for EMI (Electro Magnetic Interference) reduction. The peak of unnecessary (EMI) can be attenuated by making the oscillation frequency slightly
Preamplifier Circuit for IR Remote Control
Preamplifier Circuit for IR Remote Control 22906 FEATURES Carrier-out-function: carrier frequency and burst length accurately correspond to the input signal AC coupled response from 20 khz to 60 khz; all
Solder Reflow Guide for Surface Mount Devices
June 2015 Introduction Technical Note TN1076 This technical note provides general guidelines for a solder reflow and rework process for Lattice surface mount products. The data used in this document is
Metal-Oxide Varistors (MOVs) Surface Mount Multilayer Varistors (MLVs) > MLN Series. MLN SurgeArray TM Suppressor. Description
MLN SurgeArray TM Suppressor RoHS Description The MLN SurgeArray Suppressor is designed to help protect components from transient voltages that exist at the circuit board level. This device provides four
Taping, Labeling, Storage, Packing and Marking
Taping, Labeling, Storage, Packing and Marking Vishay Semiconductor Standard Bar Code Labels Standard bar code labels for finished goods The standard bar code labels are product labels and used for identification
ESD7484. 4-Line Ultra-Large Bandwidth ESD Protection
4-Line Ultra-Large Bandwidth ESD Protection Functional Description The ESD7484 chip is a monolithic, application specific discrete device dedicated to ESD protection of the HDMI connection. It also offers
Harvatek Surface Mount CHIP LED Data Sheet HT-380FCH-ZZZZ
Harvatek Surface Mount CHIP LED Data Sheet Official Product HT Part No. Customer Part No. Data Sheet No. Tentative Product **************** **************** May. 14, 2007 Version of 1.1 Page 1/15 DISCLAIMER...
Intel RAID Maintenance Free Backup Unit 4 Quick Installation User's Guide
Intel RAID Maintenance Free Backup Unit 4 Quick Installation User's Guide Thank you for buying an Intel RAID Maintenance Free Backup Unit 4. The Intel RAID Maintenance Free Backup Unit 4 supports the Intel
SMS7630-061: Surface Mount, 0201 Zero Bias Silicon Schottky Detector Diode
DATA SHEET SMS7630-061: Surface Mount, 0201 Zero Bias Silicon Schottky Detector Diode Applications Sensitive RF and microwave detector circuits Sampling and mixer circuits High volume wireless systems
MMSZxxxT1G Series, SZMMSZxxxT1G Series. Zener Voltage Regulators. 500 mw SOD 123 Surface Mount
MMSZxxxTG Series, SZMMSZxxxTG Series Zener Voltage Regulators 5 mw SOD 3 Surface Mount Three complete series of Zener diodes are offered in the convenient, surface mount plastic SOD 3 package. These devices
Silicon temperature sensors. Other special selections are available on request.
Rev. 05 25 April 2008 Product data sheet 1. Product profile 1.1 General description The temperature sensors in the have a positive temperature coefficient of resistance and are suitable for use in measurement
Designing with High-Density BGA Packages for Altera Devices
2014.12.15 Designing with High-Density BGA Packages for Altera Devices AN-114 Subscribe As programmable logic devices (PLDs) increase in density and I/O pins, the demand for small packages and diverse
MMBZ52xxBLT1G Series, SZMMBZ52xxBLT3G. Zener Voltage Regulators. 225 mw SOT 23 Surface Mount
MMBZ5xxBLTG Series, SZMMBZ5xxBLTG Series Zener Voltage Regulators 5 mw SOT Surface Mount This series of Zener diodes is offered in the convenient, surface mount plastic SOT package. These devices are designed
NBB-300 Cascadable Broadband GaAs MMIC Amplifier DC to 12GHz
Cascadable Broadband GaAs MMIC Amplifier DC to 12GHz NBB-300 The NBB-300 cascadable broadband InGaP/GaAs MMIC amplifier is a low-cost, high-performance solution for general purpose RF and microwave amplification
1.Introduction. Introduction. Most of slides come from Semiconductor Manufacturing Technology by Michael Quirk and Julian Serda.
.Introduction If the automobile had followed the same development cycle as the computer, a Rolls- Royce would today cost $00, get one million miles to the gallon and explode once a year Most of slides
PACKAGE QUALIFICATION SUMMARY REPORT
PACKAGE QUALIFICATION SUMMARY REPORT Document Control #: Purpose: Device: Mask Identification #: Process Technology: Product: ML1120110066 To provide qualification summary report for all packages Various
Application Specification SIAMEZE * Standard and 114-13166 Fine Range Terminals 18 Mar 11 Rev C
Application Specification SIAMEZE * Standard and 4-66 Fine Range Terminals 8 Mar Rev C NOTE i All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters
MC14001B Series. B Suffix Series CMOS Gates MC14001B, MC14011B, MC14023B, MC14025B, MC14071B, MC14073B, MC14081B, MC14082B
MC4B Series BSuffix Series CMOS Gates MC4B, MC4B, MC4B, MC4B, MC4B, MC4B, MC4B, MC4B The B Series logic gates are constructed with P and N channel enhancement mode devices in a single monolithic structure
Freescale IEEE 802.15.4 / ZigBee Package and Hardware Layout Considerations. Reference Manual
Freescale IEEE 802.15.4 / ZigBee Package and Hardware Layout Considerations Reference Manual Document Number: ZHDCRM Rev. 1.6 3/2012 How to Reach Us: Home Page: www.freescale.com E-mail: support@freescale.com
L78. Positive voltage regulator ICs. Description. Features
Positive voltage regulator ICs Description Datasheet - production data TO-220 Features DPAK TO-220FP D²PAK Output current up to 1.5 A Output voltages of 5; 6; 8; 8.5; 9; 12; 15; 18; 24 V Thermal overload
3216 Ceramic Chip Antenna for Bluetooth/WLAN Application
ANTENNA PRODUCTS Mars Liu C.T.Lee Page 1 sheet 190-1 A4 for Bluetooth/WLAN Application Preliminary Product Specification Quick Reference Data Centre Frequency Bandwidth VSWR Polarization Azimuth Beamwidth
Features. Modulation Frequency (khz) VDD. PLL Clock Synthesizer with Spread Spectrum Circuitry GND
DATASHEET IDT5P50901/2/3/4 Description The IDT5P50901/2/3/4 is a family of 1.8V low power, spread spectrum clock generators capable of reducing EMI radiation from an input clock. Spread spectrum technique
ECONOMIC COMMISSION OF EUROPE (ECE) BRANDING
Much like the U.S. Department of Transportation, The Economic Commission of Europe, or ECE, regulates the manufacturing of vehicle components. To receive ECE branded approval, tires must meet set standards
MM74HC273 Octal D-Type Flip-Flops with Clear
MM74HC273 Octal D-Type Flip-Flops with Clear General Description The MM74HC273 edge triggered flip-flops utilize advanced silicon-gate CMOS technology to implement D-type flipflops. They possess high noise
Guidelines for Handling J-Lead, QFP & BGA Devices
Guidelines for Handling J-Lead, QFP & BGA Devices January 1999, ver. 4 Application Note 71 Introduction Devices that use surface-mount J-lead, quad flat pack (QFP), and ball-grid array (BGA) including
TA = 25 C unless otherwise noted. Symbol Parameter Value Units
Discrete POWER & Signal Technologies C B E TO-92 NPN Darlington Transistor This device is designed for applications requiring extremely high current gain at currents to 1.0 A. Sourced from Process 05.
Harvatek Surface Mount LED Data Sheet HT-T167 Ultra-bright Reverse Gullwing Series
Harvatek Surface Mount LED Data Sheet HT-T167 Ultra-bright Reverse Gullwing Series Jul. 21, 2005 Version of 1.1 Page 1/22 DISCLAIMER...3 PRODUCT SPECIFICATIONS...4 LABEL SPECIFICATIONS...5 PRODUCT CHARACTERISTICS...10
HEDS-9000/9100 Two Channel Optical Incremental Encoder Modules. Features. Applications
HEDS-9000/9100 Two Channel Optical Incremental Encoder Modules Data Sheet Description The HEDS-9000 and the HEDS-9100 series are high performance, low cost, optical incremental encoder modules. When used
ISL6700. 80V/1.25A Peak, Medium Frequency, Low Cost, Half-Bridge Driver. Features. Ordering Information. Applications. Pinouts
ISL6700 Data Sheet FN9077.6 80V/1.25A Peak, Medium Frequency, Low Cost, Half-Bridge Driver The ISL6700 is an 80V/1.25A peak, medium frequency, low cost, half-bridge driver IC available in 8-lead SOIC and
Harvatek Surface Mount LED Data Sheet. HT-F195 Series
Harvatek Surface Mount LED Data Sheet Official Product Product: Data Sheet No. Tentative Product **************** Jul. 15, 2005 Version of 1.4 Page 1/20 DISCLAIMER...3 PRODUCT SPECIFICATIONS...4 ATTENTION:
The quadrature signals and the index pulse are accessed through five 0.025 inch square pins located on 0.1 inch centers.
Quick Assembly Two and Three Channel Optical Encoders Technical Data HEDM-550x/560x HEDS-550x/554x HEDS-560x/564x Features Two Channel Quadrature Output with Optional Index Pulse Quick and Easy Assembly
MM74HC174 Hex D-Type Flip-Flops with Clear
Hex D-Type Flip-Flops with Clear General Description The MM74HC174 edge triggered flip-flops utilize advanced silicon-gate CMOS technology to implement D-type flipflops. They possess high noise immunity,
HI-200, HI-201. Features. Dual/Quad SPST, CMOS Analog Switches. Applications. Ordering Information. Functional Diagram FN3121.9
Data Sheet FN3121.9 Dual/Quad SPST, CMOS Analog Switches HI-200/HI-201 (dual/quad) are monolithic devices comprising independently selectable SPST switches which feature fast switching speeds (HI-200 240ns,
TQP4M3019 Data Sheet. SP3T High Power 2.6V 2x2 mm CDMA Antenna Switch. Functional Block Diagram. Features. Product Description.
Functional Block Diagram Product Description TriQuint s TQP4M3019 is a high power antenna switch in a single pole three throw (SP3T) configuration. The die utilizes TriQuint s PHEMT MMIC switch process
1N59xxBRNG Series. 3 W DO-41 Surmetic 30 Zener Voltage Regulators
W DO-4 Surmetic 0 Zener Voltage Regulators This is a N9xxBRNG series with limits and excellent operating characteristics that reflect the superior capabilities of silicon oxide passivated junctions. All
CHAPTER 6 THERMAL DESIGN CONSIDERATIONS. page. Introduction 6-2. Thermal resistance 6-2. Junction temperature 6-2. Factors affecting R th(j-a) 6-2
CHAPTER 6 THERMAL DESIGN CONSIDERATIONS page Introduction 6-2 Thermal resistance 6-2 Junction temperature 6-2 Factors affecting 6-2 Thermal resistance test methods 6-3 Test procedure 6-3 Forced air factors
Semiconductor Packing Methodology
Application Report SZZA021C September 2005 Semiconductor Packing Methodology Cles Troxtell, Bobby O Donley, Ray Purdom, and Edgar Zuniga Standard Linear & Logic ABSTRACT The Texas Instruments Semiconductor
Preamplifier Circuit for IR Remote Control
Preamplifier Circuit for IR Remote Control DESCRIPTION 2296 The is designed for use in an IR receiver application together with a photo pin diode. It is a sophisticated receiver concept that is very sensitive
Preamplifier Circuit for IR Remote Control
Product is End of Life June-216 and Replaced by New (#82748) Preamplifier Circuit for IR Remote Control (please see PCN OMV-877-215, datasheet is valid until 3 th June 216) MECHANICAL DATA Pinning: 1,
Description. Dimensions. Features. www.pwb-encoders.com. precision works better
Description The MEC22 is a high resolution optical hollow shaft encoder that can be fixed quickly and easily on different sizes of motor shafts. The encoder provides two square wave outputs in quadrature
LC03-6R2G. Low Capacitance Surface Mount TVS for High-Speed Data Interfaces. SO-8 LOW CAPACITANCE VOLTAGE SUPPRESSOR 2 kw PEAK POWER 6 VOLTS
Low Capacitance Surface Mount TVS for High-Speed Data terfaces The LC3- transient voltage suppressor is designed to protect equipment attached to high speed communication lines from ESD, EFT, and lighting.
HL-A-3528H308W-S1-13. Description. Applications. Recommended Soldering. Package Dimensions
RoHS Specification Client Name: Client P/N: Factory P/N: HL-A-3528H308W-S1-13 OF-SMD3528WN Sending Date: Client approval Hong li approval Approval Audit Confirmation Approval Audit Confirmation 殷 小 平 王
INTERNATIONAL ATOMIC ENERGY AGENCY INSTRUMENTATION UNIT SMD (SURFACE MOUNTED DEVICES) REPAIR S. WIERZBINSKI FEBRUARY 1999
(SURFACE MOUNTED DEVICES) REPAIR S. WIERZBINSKI FEBRUARY 1999 (SURFACE MOUNTED DEVICES) REPAIR 1 TABLE OF CONTENTS PAGE 1. INTRODUCTION 3 2. ADVANTAGES 4 3. LIMITATIONS 4 4. DIALECT 5 5. SIZES AND DIMENSIONS
N&H Technology GmbH. Silicone Rubber Keypad. Single Source Supply. Design Guide - Short Version. Engineering in Germany - Production in East Asia
N&H Technology GmbH Import & Export of Industrial Products Technical Support and Engineering Business Consulting and Representation Silicone Rubber Keypad Design Guide - Short Version Single Source Supply
Power SMD LED PLCC-2 Plus
Power SMD LED PLCC-2 Plus 2238 DESCRIPTION The VLMW51.. white LED in PLCC-2 plus package is an advanced product in terms of high luminous flux and low thermal resistance. In combination with the small
AMPSEAL* Automotive Plug Connector and Header Assembly
AMPSEAL* Automotive Plug Connector and Header Assembly Application Specification 24 SEP 97 Rev E All dimensions are given in millimeters unless otherwise specified. All dimensional tolerances are +0.2
74AC139 74ACT139 Dual 1-of-4 Decoder/Demultiplexer
Dual 1-of-4 Decoder/Demultiplexer General Description The AC/ACT139 is a high-speed, dual 1-of-4 decoder/ demultiplexer. The device has two independent decoders, each accepting two inputs and providing
MM74HC14 Hex Inverting Schmitt Trigger
MM74HC14 Hex Inverting Schmitt Trigger General Description The MM74HC14 utilizes advanced silicon-gate CMOS technology to achieve the low power dissipation and high noise immunity of standard CMOS, as
uclamp3301h Low Voltage μclamp TM for ESD and CDE Protection PRELIMINARY Features
PROTECTION PRODUCTS -MicroClamp Description The μclamp series of Transient Suppressors (TVS) are designed to replace multilayer varistors (MLVs) in portable applications such as cell phones, notebook computers,
TEST SOLUTIONS CONTACTING - SEMICONDUCTOR
ENGINEERED TO CONNECT CONTACTING - SEMICONDUCTOR TEST SOLUTIONS SPECIFICATIONS AND DRAWINGS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER CONTACTING - SEMICONDUCTOR 3 SEries
A and M Electronics Contract Manufacturing Circuit Board Assembly 25018 Avenue Kearny Valencia, Ca. 91355 (661) 257-3680 or (800) 923-3058
A and M Electronics Contract Manufacturing Circuit Board Assembly 25018 Avenue Kearny Valencia, Ca. 91355 (661) 257-3680 or (800) 923-3058 "When Quality Counts, Choose A&M Electronics" SMT, BGA, & Through
Agilent AEDB-9140 Series Three Channel Optical Incremental Encoder Modules with Codewheel, 100 CPR to 500 CPR Data Sheet
Agilent AEDB-9140 Series Three Channel Optical Incremental Encoder Modules with Codewheel, 100 CPR to 500 CPR Data Sheet Description The AEDB-9140 series are three channel optical incremental encoder modules
INTEGRATED CIRCUITS DATA SHEET. PCF8574 Remote 8-bit I/O expander for I 2 C-bus. Product specification Supersedes data of 2002 Jul 29.
INTEGRATED CIRCUITS DATA SHEET Remote 8-bit I/O expander for I 2 C-bus Supersedes data of 2002 Jul 29 2002 Nov 22 CONTENTS 1 FEATURES 2 GENERAL DESCRIPTION 3 ORDERING INFORMATION 4 BLOCK DIAGRAM 5 PINNING
UV SMD LED PLCC-2 FEATURES APPLICATIONS. at I F (ma) (ma) MIN. TYP. MAX. MIN. TYP. MAX. MIN. TYP. MAX.
UV SMD LED PLCC-2 VLMU31 19225 DESCRIPTION The package of the VLMU31-series is the PLCC-2. It consists of a lead frame which is embedded in a white thermoplast. The reflector inside this package is filled
3-Channel Supervisor IC for Power Supply
3-Channel Supervisor IC for Power Supply Features Over-voltage protection and lockout Under-voltage protection and lockout Open drain power good output signal Built-in 300mS delay for power good 38mS de-bounce
M C C. www.mccsemi.com. THROUGH HOLE - AXIAL LEADED Through Hole Package Quantity Case. Micro Commercial Components TM
180 M THROUH HOL - XIL L Through Hole Package Quantity ase vailable Packaging (pcs) Style ulk 13 Tape & Reel mmo Pack ox/ag Qty Tube Qty Tray Qty Qty Qty -405 5000-1 2500 50 O-15 500 4000 3000 O-201 500
HT6P20X Series 2 24 OTP Encoder
2 24 OTP Encoder Features Operating voltage: 2V~12V Low power consumption Built-in oscillator needs only 5% resistor 2/4 data selectable 2 24 maximum address and data codes Easy interface with an RF or
3EZ6.2D5 Series. 3 Watt DO-41 Surmetic 30 Zener Voltage Regulators
EZ6.D Series Watt DO- Surmetic Zener Voltage Regulators This is a complete series of Watt Zener diodes with limits and excellent operating characteristics that reflect the superior capabilities of silicon-oxide
Express5800/120Ed. Rack Mount Kit Installation Procedures PN: 455-01607-001
Express5800/120Ed Rack Mount Kit Installation Procedures PN: 455-01607-001 Proprietary Notice and Liability Disclaimer The information disclosed in this document, including all designs and related materials,
1SMB59xxBT3G Series, SZ1SMB59xxT3G Series. 3 Watt Plastic Surface Mount Zener Voltage Regulators
9xxBTG Series, SZ9xxTG Series Watt Plastic Surface Mount Zener Voltage Regulators This complete new line of W Zener diodes offers the following advantages. Features Zener Voltage Range. V to V ESD Rating
NUD4011. Low Current LED Driver
NUD0 Low LED Driver This device is designed to replace discrete solutions for driving LEDs in AC/DC high voltage applications (up to 00 V). An external resistor allows the circuit designer to set the drive
Typical values for a Kapton Polyimide tape wrapped sample, according to NEMA Specifications
DACRON DACRON GLASS FIBER COVERED MAGNET WIRE CLASS 200 INSULATION DACRON Glass Fiber-covered Magnet Wire is manufactured by serving a combination of glass and Dacron fibers over a bare or film-coated
SC-1000/2000 ROTARY CODED SWITCHES FEATURES PART NUMBER DESIGNATION S C - 1 0 1 0 T B. RoHS compliant
SC-00/2000 RoHS compliant INTERNAL STRUCTURE SC-00 / 2000 series 4 2 3 6 FEATURES BC RoHS compliant Fine click with metallic spring Low profile of 3.9 mm makes perfect for high density board mounting applications
Small Optical Encoder Modules 480lpi Digital Output. Features. Applications VCC 3 CHANNEL A 2 CHANNEL B 4 GND 1
HEDS-9730, HEDS-9731 Small Optical Encoder Modules 480lpi Digital Output Data Sheet Description The HEDS-973X is a high performance incremental encoder module. When operated in conjunction with either
MC14008B. 4-Bit Full Adder
4-Bit Full Adder The MC4008B 4bit full adder is constructed with MOS PChannel and NChannel enhancement mode devices in a single monolithic structure. This device consists of four full adders with fast
NARROW-PITCH (0.8mm) CONNECTORS P8 SERIES
Socket Header Compliance with RoHS Directive NRROW-PITCH CONNECTORS FOR PC ORDS 3. Perfect for portable devices, the bellows-type provide a strong resistance against falling, impacts, and forced insertions
56-Pin Quad Flatpack No-Lead Logic Package
Application Report SCEA032 - March 2003 56-Pin Quad Flatpack No-Lead Logic Package Frank Mortan and Lance Wright SLL Package Development ABSTRACT Texas Instruments (TI) Quad Flatpack No-Lead (QFN) 56-terminal
uclamp0541z Ultra Small μclamp 1-Line ESD Protection
- Z-Pak TM Description μclamp TVS diodes are designed to protect sensitive electronics from damage or latch-up due to ESD. It is designed to replace 2 size multilayer varistors (MLVs) in portable applications
PACKAGE QUALIFICATION SUMMARY REPORT
PACKAGE QUALIFICATION SUMMARY REPORT Document Control #: Purpose: Device: Mask Identification #: Process Technology: Product: To provide qualification summary report for all packages Various Various Pure
Agilent X/P/K281C Adapters
Agilent X/P/K281C Adapters Including Options 006, 012, 013, 106 Operating and Service Manual Contents 1 Introduction 7 Product Overview 8 Options 8 Instruments Covered by Manual 10 2 Installation 11 Initial
Cree PLCC6 3-in-1 SMD LED CLP6C-FKB
PRODUCT FAMILY DATA SHEET CLD-CT933.002 Cree PLCC6 3-in-1 SMD LED PRODUCT DESCRIPTION Cree PLCC full-color LEDs offer highintensity light output and a wide viewing angle in an industry-standard package.
January 1999, ver. 3 Application Note 80. 1 Burn-in sockets are zero-insertion-force (ZIF) sockets that do not deform a device s leads.
Selecting Sockets for Altera Devices January 1999, ver. 3 Application Note 80 Introduction Surface-mount assembly places unique demands on the development and manufacturing process by requiring different
0.45mm Height 0402 Package Pure Green Chip LED Technical Data Sheet. Part No.: LL-S160PGC-G5-1B
.45mm Height 42 Package Pure Green Chip LED Technical Data Sheet Part No.: LL-S16PGC-G5-1B Spec No.: S16 Rev No.: V.2 Date: Dec./6/25 Page: 1 OF 9 Features: Package in 8mm tape on 7" diameter reel. Compatible
L78MxxAB L78MxxAC. Precision 500 ma regulators. Features. Description
L78MxxAB L78MxxAC Precision 500 ma regulators Features Output current to 0.5 A Output voltages of 5; 6; 8; 9; 10; 12; 15; 18; 24 V Thermal overload protection Short circuit protection Output transition
SKY16406-381LF: 2.2-2.8 GHz Two-Way, 0 Degrees Power Divider
DATA SHEET SKY16406-381LF: 2.2-2.8 GHz Two-Way, 0 Degrees Power Divider Applications TD-LTE systems Satellite communications 2.4 GHz ISM band Features Low insertion loss: 0.3 db @ 2.5 GHz High isolation:
PRTR5V0U2F; PRTR5V0U2K
Rev. 02 19 February 2009 Product data sheet 1. Product profile 1.1 General description Ultra low capacitance double rail-to-rail ElectroStatic Discharge (ESD) protection devices in leadless ultra small
1 TO 4 CLOCK BUFFER ICS551. Description. Features. Block Diagram DATASHEET
DATASHEET 1 TO 4 CLOCK BUFFER ICS551 Description The ICS551 is a low cost, high-speed single input to four output clock buffer. Part of IDT s ClockBlocks TM family, this is our lowest cost, small clock
Zero peel strength of acrylic pressure sensitive adhesive is at about 45 C (-50 F).
PRODUCT BULLETIN Aluminum Polyimide Acrylic (3M 966) PSA First Surface Aluminum Coated Polyimide Tape with Acrylic 3M 966 Adhesive TAPES Sheldahl Brand Materials first surface aluminized polyimide tape
2200 SERIES COMMON DRIVE PACKAGE Special Capabilities Specification Sheet
975 Cottonwood Ave., PO Box 20, Hartland, Wisconsin 53029-0020, USA www.dorner.com info@dorner.com COMMON DRIVE CONVEYOR SETUP Up to (4) conveyors can be coupled together and driven from a single gearmotor.
PCB Design. Gabe A. Cohn. May 2010. Using Altium Designer/DXP/Protel. Electrical Engineering University of Washington
PCB Design Using Altium Designer/DXP/Protel Gabe A. Cohn May 2010 Electrical Engineering University of Washington Printed Circuit Board Steps 1. Draw schematics 2. Attach footprints for all components