VarioControl LinearDrive 720D1 and 720D2

Transcription

1 VarioControl LinearDrive 720D1 and 720D A FullColour Dimmable LED Driver LINEAdrive DC is a constant voltage LED driver with multiple LED outputs that are controlled over four channels. It is targeted at larger networked and smaller standalone installations that require dimmable, lowpower fullcolour static or dynamic LED lighting. LINEAdrive DC is DALI, DX D and LedSync compatible. Applications Entertainment lighting Fullcolour architectural lighting Signageadvertising lighting Cove lighting Decorative lighting Dynamic colour panel lighting Features & benefits Input Voltage: VDC for LINEAdrive 720D VDC for LINEAdrive 720D2 Current, max: 24 A, irrespective of voltage Output Voltage: 5 V, 12 V, 24 V or 48 V (48 V: LINEAdrive 720D2 only) ax load per output: LINEAdrive 720D 24 V 24 V LINEAdrive 720D1 6 A 6 A LINEAdrive 720D2 6 A 6 A General DALI, USITT DX512AD (ANSI E1.20) and LedSync compatible HydraDrive: 15bit resolution Dimming control: smooth dimming from 100 % to 0.1 %, gammacorrected curve Intuitive 3button user interface for onthefly configuration Interface for external control device: 10 kω potentiometer, 0 10 V source or momentary switch VarioControl LINEAdrive 720D1 and 720D

2 VarioControl LinearDrive 720D1 and 720D2 Dimensions, weight, packaging LINEAdrive 720D Weight: 144 g, 5.0 oz 10 mm mm4.33 ø 4.2 mm0.17 GND 21.5 mm mm mm mm0.39 DA DA DA DA LINEAdrive 720D V24 A Direct voltage controlled LED driver 50 mm mm6.02 VarioControl LINEAdrive 720D1 and 720D Ext in Ext in DX in DX in DX in shield LedSync out LedSync out Connections Connectors LINEAdrive 720D VDC: and DX in:, and shield LedSync out:, and shield DALI: and (x2) Ext in: and LED outputs: and (x4) Wiring Cross section: mm 2, AWG Strip length: 9 mm 0.35 in. Other information Certifications CE IEC 61347, EN 55015, IEC 61003, EN UL: UL ecognized Component (file no. E333135) Environmental ratings Ta range: 20 C...50 C4 F F Tc max: 65 C149 F For use in dry locations Control compatibility DALI control gear DX512 A and D explore & address (ANSI E1.20) control gear Standard 0 10 V switch controls

3 { VarioControl LinearDrive 720D1 and 720D2 Wiring diagram V DC IN VDC and LED connectors: 1 2 AWG mm 2 1 Other connectors: 2 AWG mm 2 Ext in Ext in 9 mm 0.35 inch 9 mm 0.35 inch DA DA DA DA DX in DX in DX in shield LedSync out LedSync out DA DA DA DA DX in DX in DX in shield LedSync out LedSync out Ext in Ext in LINEAdrive 720D V24 W Direct voltage controlled LED driver GND Power supply CAUTION: The device may only be connected and installed by a qualified electrician. All applicable regulations, legislation and building codes must be observed. Incorrect installation of the device can cause irreparable damage to the device and the connected LEDs. VarioControl LINEAdrive 720D1 and 720D V 48 V DC IN To connect the driver to a V DC power supply unit (), connect the s positive voltage supply wire to the VDC connector and the s negative voltage supply wire to the VDC connector. The driver and LEDs can use the same. EXT in You have the possibility to connect an external control device (0 10 V control device, 10kΩ potentiometer or show selection switch) to the driver s Ext in and Ext in connector. Configure the driver for use with an external control device over the 3button user interface. DA DA Use these connectors to connect the driver to a DALI network. Always combine a DA and a DA connector for either data input or data output. DX inledsync out Use these connectors when the driver is used in a DX network. For DX in, connect the network cable s DX, DX and DX shielding wire (the orangewhite, orange and brown wire in a CAT5 cable) to the DX in, DX in and DX in shield connector respectively. For LedSync out, connect the network cable s data, dataand shielding wire to the LedSync out, LedSync out and connector respectively. Indicates the location of the connectors for your. (ed) represents channel 1, G(reen) represents channel 2, B(lue) represents channel 3 and W(hite) represents channel 4. The default group color allocation can be changed over the 3button user interface.

4 VarioControl LinearDrive 720D1 and 720D2 Wiring diagram Connecting an GB LED strip aximum current per output: 6 A cm inch. GND G B GB LED strip Press and simultaneously, in the LED menu choose GB and save this setting by pressing. Connecting an GB strip and a white LED strip aximum current per output: 6 A cm inch. GND G B GB LED strip Press and simultaneously, in the LED menu choose GBW and save this setting by pressing. Connecting warm white and cool white LED strips aximum current per output: 6 A cm inch. Press and simultaneously, in the LED menu choose 4 4 L and save this setting by pressing. GND Warm Cool Warm Cool VarioControl LINEAdrive 720D1 and 720D Connecting four white or selfcolored LED strips aximum current per output: 6 A cm inch. Press and simultaneously, in the LED menu choose 1 4 L and save this setting by pressing. GND

5 VarioControl LinearDrive 720D1 and 720D2 Quick Start Guide anual configuration Other features 1. Select mode of operation Locking the configuration (5 sec) (5 sec) Set mode ODE SET COL SHOW DX DALI Lock driver LOCK SOFT HAD 2. Set LED External input EXT INP Dimming curve DI CUV 11L GB 22L GBW 33L GBA 44L GB 24L GGB 14L CCWW CWWW OFF POT 10V SWIT LOG LIN Visual test run Test TEST 1 sec G 1 sec B 1 sec W 1 sec GBW 1 sec 1 sec G 1 sec B 1 sec W 1 sec GBW 1 sec 3. Standalone Standalone Networked operation or operation or operation Colour* Show DX or DALI eset to factory defaults (5 sec) Hue HUE White WHIT Show SHOW Speed SPD DX address DX Network resolution NETW ADD ES BT 16 BT No address ADD Address set ADD SET eset E SET PES ENU Press menu VarioControl LINEAdrive 720D1 and 720D Intensity INT Intensity INT * The colour menu depends on the LED group settings you have selected in step DX termination TE Network setup NETW SET Interpolation INTEPOL YES AUTO ANU OFF VID COL WHIT GLOW Nr. of ballasts X BAL