Fluid Mechanics Laboratory (Phase 1 ) (8AD1)
|
|
|
- Shon Melton
- 9 years ago
- Views:
Transcription
1 FLUID MECHANICS LABORATORY (Phase 1) * Center: "..." * Country: "..." * Date: * Issue: "..." "..." Quality Certificates: Worlddidac Member ISO 9000: Quality Management (for Design, Manufacturing, Commercialization and After-sales service) European Union Certificate (total safety) Certificates ISO and ECO-Management and Audit Scheme (environmental management) Worlddidac Quality Charter Certificate (Worlddidac Member)
2 Fluid Mechanics Laboratory (Phase 1 ) Index - Project content. - Technical area available. - Economical proposal. - Classroom and Laboratory Lay Out. - Main teaching units. - Main target. - Project options covered. - Project conditions. - Teaching techniques used.
3 Project content Modern design Main blocks DESIGNING MANUFACTURING COMPLETE PACKAGE SUPPLYING TRAINING Products Full units design ELECTRONICS (ORCAD) MECHANICAL DESIGN (AUTOCAD) CONTROL APPLICATIONS DESIGN (SACED) MANUALS DESIGN (OFFICE) Ref.:8AD1/pre(01/11)
4 Technical area available * Fluids Mechanics & Aerodynamics. - Complements, Instruments and Tools. Note: The complete technical design is ready at our premises
5 Economical Proposal Teaching s: Fluid Mechanics & Aerodynamics /10S: Elementary Fluid Mechanics (10 CAI + CAL) 0813/10A: Elementary Fluid Mechanics (10 BDAS) 0813/10B: Elementary Fluid Mechanics (10 FME00) 0820: Fuid Mechanics Basic Module 0820/PLC: PLC's Module 0821: Fluid Mechanics (Channel 80mm Section) 0821/PLC: PLCs Module 0830/10S: Pumps Basic Module(10 CAI + CAL) 0840/10S: Turbines "Hydraulic Machines-Water" Basic Module(10 CAI + CAL) 0850: Aerodynamics Basic Module 0850/PLC: PLC's Module 0800/ESN: EDIBON Scada-Net for Fluid Mechanics units Complements, Instruments and Tools: Complements, Instruments and Tools : Cupboard & Shelves Module : Computer Module 5122: Teaching Aids Module 5124: Complete Health & Safety : Mechanical Toolkit Module : Electricity Toolkit Module : Electronics Toolkit Module Services: * Furnitures: * Electrical, Water and Air Installation and others laboratory services * Installation of all units supplied, Starting up, Training, Teacher Training and Technology Transfer
6 Classroom and Laboratory Lay Out FLUID MECHANICS LABORATORY (Phase 1) 32 cm HCMP 9 cm HVB AFTC INT 1,5 cm Web-cam Computer for each Teaching Teacher and Student Desk with computers Table for Teaching 1,4 cm ROOM 3 1,6 cm HSMAP HECA TEACHER DESK FMDU EDIBON ESN SCADA-NET STOCK CAS OTHER TEACHING AND NON TEACHING UNITS INT PROJECTOR COMPUTER CONTROLLED UNITS 150x80 150x80 150x80 ROOM 2 MAIN ELECTRICAL CABINET EMERGENCY DOOR ROOM 1 MAIN WATER CABINET 2,7 cm 150x80 06x051 MAIN AIR PANEL TOILET 100x40 ELECTRONIC BLACKBOARD SERVICES MANAGER ROOM TOILET TA50/250C INT EXPANSIONS SPACE 150x80 LOCAL NET WITH SCADA-NET SYSTEM SEMINARY CFC80/5 UVF STAND ALONG AND DANGEROUS UNITS STUDENT TOILET 3,3 cm AMTC INT EGAC INT LIFLUBA LFA BHI 25 cm Teaching INT Electronic Interface Cupboard 150x80 cm 48x35 cm EDIBON ESN SCADA-NET cm 80x30 Table office Shelves Table E: 1:100
7 Main Teaching s LIFLUBA AFTC AMTC EGAC LFA BHI HVB UVF FMDU HCMP HECA HSMAP CFC80/5 CAS TA50/250C Basic Fluids Mechanics Integrated Laboratory. Computer Controlled Fluid Friction in Pipes with Hydraulics Bench (FME00). Computer Controlled Pipe Network with Hydraulics Bech (FME00). Computer Controlled Water Hammer. Laminar Flow Visualization. Hydrostatics Bench. Falling Sphere Viscosimeter and Drag Coefficient. Flow Visualization. Flow Meter Demonstration. (Complete version) Precision Pressure Gauge Calibration Air Flow Studies Air Pressure Maintained Water System Trainer Computer Controlled Flow Channel, section: 80mm, 5 m length (without accessories). Sediment Transport Demonstration Channel. Computer controlled Aerodynamic Tunnel, 50x250mm.
8 Main target * To help the students: - By quick understanding. - By clear understanding (clear concepts). - By saving time. - By extending the laboratory to their homes. * To help the teachers: - By easy teaching. - By increasing the teaching efficiency. - By reducing teaching costs (less time consume). - By integrating classroom and laboratory in the same place.
9 Project options covered This Fluid Mechanics Laboratory (Phase 1) will cover the following: a) To train students at laboratory. b) To train trainers. c) To be used for training and update educators in current teaching technologies. d) To give courses to workers in the industry, as it simulates industrial process. e) To be used for carrying out applied research, in several processes and different technical areas. f) To be used as research tool for international projects. g) To train other countries teachers.
10 Project conditions The Fluid Mechanics Laboratory (Phase 1) includes the following technical and commercial conditions: a) Technical conditions: - Laboratories adaptation. - Installation of all units supplied. - Starting up for all units. - Training about the exercises to be done with any unit. - Teacher training related with the teaching unit and the teaching techniques used. - Technology transfer. b) Commercial conditions: - Packing. - Financing Charges. - C.I.F. Charges. c) Other conditions: - 8 Manuals for each teaching equipment:. Required services manual.. Assembly and installation manual.. Interface and software/control console manual.. Set in operation manual.. Safety norms manual.. Practices manual.. Maintenance manual.. Calibration manual.
11 Physics ( Magnetic fields, Electrical fields, Mechanics, Acoustics, Optics, Thermodynamics and Fluid Mechanics) TEACHING TECHNIQUES USED 3D. EDIBON THREE DIMENSIONS SYSTEM Interface Data acquisiton board CAI. COMPUTER AIDED INSTRUCTION SYSTEM E x Q + included: -Control -Data Acquisition -Data Management Teacher + Student Basic Electronics and Electricity. Communications. Basic Mechanics. Basic Fluid Mechanics. EDAS. EDIBON DATA ACQUISITION SYSTEM Data Acquisition Interface Data acquisiton board Basic Electronics. Communications. Electricity. RTC. EDIBON SYSTEM FOR HIGH ELECTRONICS (Real time control) Control High Tech Electronics (Control Electronics, Digital Electronics and Industrial Electronics). Data acquisiton board Option: Simulation WEB:
12 HYBRID. EDIBON TEACHING HYBRID SYSTEM (ENERGY) Energy Power Plants. Alarms Strength of Materials. Some Probes PHOTOELASTICITY SACED. EDIBON COMPUTER CONTROL SYSTEM:Control+Data Acquisition+Data Management Fluid Mechanics. Aerodynamics. Thermodymanics &Thermotechnics. Process Control. Chemical Engineering. Food Technology. Water Technology. Environment. Condensation Process Evaporation Process PLC option ( ST13, SP-1) (ST 14, SP-2) Interface (ST12, SP-2) H: : This energy is absorbed by the refrigerant system Data Acquisiton board Simulation ESN. EDIBON SCADA-NET SYSTEM RESULTS Diferences between the simulation and the photoelastic reality. Real included: -Control -Data Acquisition -Data Management ST-5 h C and Humidity ST-4 H h B and Humidity Complex Processes and Complete Laboratories WEB:
Computer Controlled Vortex Tube Refrigerator Unit, with SCADA TPVC
Technical Teaching Equipment Computer Controlled Vortex Tube Refrigerator Unit, with SCADA TPVC Teaching Technique used EDIBON SCADA System 2 Control Interface Box 5 Cables and Accessories 6 Manuals 3
Computer Controlled Automobile Air Conditioning Trainer, with SCADA TAAUC
Technical Teaching Equipment Computer Controlled Automobile Air Conditioning Trainer, with SCADA TAAUC EDIBON SCADA System Teaching Technique used 1 Unit: TAAUC. Automobile Air Conditioning Trainer 5 6
6.2.2 TECHNICAL ARGUMENTS FOR OWN SCADA AND OWN SCADA WITH PID CONTROL.
1/9 www.edibon.com Ref: 6.2.2 TECHNICAL ARGUMENTS FOR OWN SCADA AND OWN SCADA WITH PID CONTROL. About 600 units in EDIBON product range are considered as advanced units. Why do we consider them advanced
Computer Controlled Nozzle Performance Test Unit, with SCADA TFTC
Technical Teaching Equipment Computer Controlled Nozzle Performance Test Unit, with SCADA TFTC EDIBON SCADA System Teaching Technique used 1 Unit: TFTC. Nozzle Performance Test Unit 5 6 2 Control Interface
Computer Controlled Generating Stations Control and Regulation Simulator, with SCADA SCE
Technical Teaching Equipment Computer Controlled Generating Stations Control and Regulation Simulator, with SCADA SCE EDIBON SCADA System Teaching Technique used 4 5 2 Data Acquisition Board Cables and
Computer Controlled Capacity Control Methods in Refrigeration, with SCADA and PID Control THARA2C/1
Technical Teaching Equipment Computer Controlled Capacity Control Methods in Refrigeration, with SCADA and PID Control THARA2C/1 EDIBON SCADA System and PID CONTROL included Teaching Technique used 5 6
EDIBON SCADA-NET System (ESN) for Chemical Engineering ESN-CHEMICAL ENGINEERING
Technical Equipment EDIBON SCADA-NET System (ESN) for Chemical Engineering ESN-CHEMICAL ENGINEERING ESN. SCADA-NET TEACHING SYSTEM New concept of Laboratories SCADA-NE T Teacher computer OPEN CONTROL +
Computer Controlled Axial Fan Teaching Trainer, with SCADA HVAC
Technical Teaching Equipment Computer Controlled Axial Fan Teaching Trainer, with SCADA HVAC Teaching Technique used EDIBON SCADA System 2 Control Interface Box 5 Cables and Accessories 6 Manuals 3 Data
Remote Control Station Via Telephone
Technical Teaching Equipment Remote Control Station Via Telephone LIELBA - AD40 Products Products range Units 4.-Electricity ELEMENTS ALLOCATION ALI02 Modules: ALI02=Main Power Supply. CTR01=Basic Control
Audio and Video Door Entry System LIELBA - AD14
Technical Teaching Equipment Audio and Video Door Entry System LIELBA - AD14 Products Products range Units 4.-Electricity ELEMENTS ALLOCATION ALI02 POR06 POR05 and POR07 POR04 POR08 Modules: ALI02= Main
Telephony Systems Trainer CODITEL
Technical Teaching Equipment Telephony Systems Trainer CODITEL Always included in the supply: Teaching Technique used EDIBON Computer Control System 2 Computer Control Software Computer (not included in
Computer Controlled Stirling Motor, with SCADA TMSC
Technical Teaching Equipment Computer Controlled Stirling Motor, with SCADA TMSC EDIBON SCADA System Teaching Technique used 2 Control Interface Box 5 Cables and Accessories 6 Manuals 3 4 Data Acquisition
Computer Controlled Photovoltaic Solar Energy Unit, with SCADA EESFC
Technical Teaching Equipment Computer Controlled Photovoltaic Solar Energy Unit, with SCADA EESFC EDIBON SCADA System Teaching Technique used 2 Control Interface Box 5 Cables and Accessories 6 Manuals
Computer Controlled Process Control System (with electronic control valve), with SCADA and PID Control UCP
Technical Teaching Equipment led System (with electronic control valve), with SCADA and PID UCP EDIBON SCADA System and PID CONTROL included Teaching Technique used 1 UCP-UB. Base Unit 2 Interface Box
Computer Controlled Chemical Reactors Trainer, with SCADA and PID Control QRC
Technical Teaching Equipment Computer Controlled Chemical Reactors Trainer, with SCADA and PID Control QRC EDIBON SCADA System and PID CONTROL included Teaching Technique used 1 QUSC. Service Unit 5 6
ENGINEERING TRAINING SYSTEMS
ENGINEERING TRAINING SYSTEMS ENGINEERING TRAINING SYSTEMS Hampden Engineering is a world leader in design and development of engineering training systems for universities, colleges, and technical institutes.
www.hft-global.com/education Refrigeration & HVAC
www.hft-global.com/education The HFT Refrigeration and HVAC range has been designed and developed to allow study of the theoretical and practical operation of many types of refrigeration and air conditioning
Antenna Trainer EAN. www.edibon.com. Technical Teaching Equipment INTRODUCTION
Antenna Trainer EAN Technical Teaching Equipment Products Products range Units 3.-Communications INTRODUCTION Antennas are the main element of aerial communications. They are the transition between a transmission
Photovoltaic Solar Energy Unit EESFB
Technical Teaching Equipment Photovoltaic Solar Energy Unit EESFB Products Products range Units 5.-Energy Electronic console PROCESS DIAGRAM AND UNIT ELEMENTS ALLOCATION Worlddidac Member ISO 9000: Quality
Program Summary. Fluid & Motion Control Filtration & Fluid Management Sensors & Measurement
Program Summary Fluid & Motion Control Filtration & Fluid Management Sensors & Measurement 2 Table of content Content Fluid & Motion Control 3 Directional Control Valves, solenoid operated 4 Directional
FLUID MECHANICS IM0235 DIFFERENTIAL EQUATIONS - CB0235 2014_1
COURSE CODE INTENSITY PRE-REQUISITE CO-REQUISITE CREDITS ACTUALIZATION DATE FLUID MECHANICS IM0235 3 LECTURE HOURS PER WEEK 48 HOURS CLASSROOM ON 16 WEEKS, 32 HOURS LABORATORY, 112 HOURS OF INDEPENDENT
Pin & Vee Block Test Machine
Pin & Vee Block Test Machine Picture of the apparatus Used in Standard Test Methods ASTM Standards D 2670, D2626, D3233, D5620 Federal Test Methods FTM-791-3807.1, FTM-791-3812.1 Chrysler Corporation 461-C-84-01,
Lab facilities for School of Architecture and Built Environment
Lab facilities for School of Architecture and Built Environment Laboratories 1. Engineering Graphics Lab 2. Surveying Lab 3. Material Testing Lab 4. Fluid Mechanics Lab 5. Concrete Lab 6. Environment Engineering
LyoBeta. R+D Freeze-Dryers
LyoBeta R+D Freeze-Dryers LyoBeta series A Responsible Choice New demands in R+D centers are related to scale-up feasibility and quality of procedures and research methods. FDA investigators consider that
Refrigeration & Air Conditioning
& Air Conditioning The Fundamentals of Commercial Trainers Air Conditioning Systems Semi-Hermetic Air Compressors Controls Automotive Air Conditioning Chilled Water Air Conditioning Plant More and more
BIOMEDICAL REFRIGERATORS
BIOMEDICAL REFRIGERATORS U LT R A L O W F R E E Z E R S - L A B O R AT O R Y, P H A R M A C E U T I C A L A N D M E D I CA L R E F R I G E R AT I O N ARCTIKO CONTROLLER At Arctiko we have the customer
AUTOMOTIVE AIR CONDITIONING SYSTEM.
. 104 105 106 107 Assembly and Disassembly of Automatic Air Condition 104 Automatic Air Condition System with Automatic LabView System Automatic Air Condition System with Fault Insertion Panel Cut away
Refrigerators - Freezers. Ekofrigolab & Ekobasic Series
Refrigerators - Freezers Ekofrigolab & Ekobasic Series Angelantoni Life Science S.r.l. manufactures a wide range of refrigerated cabinets and combined refrigerator/freezer cabinets. We offer high reliability
Hydraulic Pipeline Application Modules PSI s Tools to Support Pipeline Operation
Hydraulic Pipeline Application Modules PSI s Tools to Support Pipeline Operation Inhalt 1 Leak Detection and Location Modules... 3 1.1 Dynamic Balance Leak Detection... 3 1.2 Transient Model Leak Detection...
ORC TURBOGENERATOR TYPE CHP - Organic Rankine Cycle Turbogenerator fed by thermal oil, for the combined production of electric energy and heat -
Doc. : 08C00031_e Date : 10.02.2009 Page : 1 / 9 ORC TURBOGENERATOR TYPE CHP - Organic Rankine Cycle Turbogenerator fed by thermal oil, for the combined production of electric - (Preliminary) Doc. : 08C00031_e
DISSOLVED OXYGEN METER Model : DO-5509
DISSOLVED OXYGEN METER Model : DO-5509 Your purchase of this DISSOLVED OXYGEN METER marks a step forward for you into the field of precision measurement. Although this DISSOLVED OXYGEN METER is a complex
THE DELTON GROUP MANPOWER TRAINING CONSULTANCY SHORT COURSE PROGRAMME TOPICS LISTING
THE DELTON GROUP MANPOWER TRAINING CONSULTANCY SHORT COURSE PROGRAMME TOPICS LISTING Delton Short Course Programmes English Language Technical English Language English Language for the Oil Industry Oil
GENERAL INFORMATION FOR REPAIR AND MAINTENANCE OF CENTRAL AIR CONDITIONING PLANT ( Direct & Chiller ).
GENERAL INFMATION F REPAIR AND MAINTENANCE OF CENTRAL AIR CONDITIONING PLANT ( Direct & Chiller ). Name of sector Refrigeration & Air Conditioning Name of Module REPAIR AND MAINTENANCE OF CENTRAL AIR CONDITIONING
Experiment (13): Flow channel
Introduction: An open channel is a duct in which the liquid flows with a free surface exposed to atmospheric pressure. Along the length of the duct, the pressure at the surface is therefore constant and
Federal Wage System Job Grading Standards for Air Conditioning Equipment Operating, 5415. Table of Contents
Federal Wage System Job Grading Standards for Air Conditioning Equipment Operating, 5415 Table of Contents WORK COVERED... 2 WORK NOT COVERED...2 TITLES... 2 GRADE LEVELS... 2 HELPER AND INTERMEDIATE JOBS...
TECHNICAL DATA E-PRO COLD UNITS Refrigerated glass display units, CDDL, CDD and CDDH series
TECHNICAL DATA E-PRO COLD UNITS Refrigerated glass display units, CDDL, CDD and CDDH series The range of E-Pro cold units includes various types of refrigerated units and worktops. Thanks to the flexible
Drain Back systems Made in Germany
Drain Back systems Made in Germany State-of-the-art technology Made in Germany Besides high-performance flat plate collectors the company STI also manufactures Drain Back systems. Many years of experience
INTRODUCTION TO FLUID MECHANICS
INTRODUCTION TO FLUID MECHANICS SIXTH EDITION ROBERT W. FOX Purdue University ALAN T. MCDONALD Purdue University PHILIP J. PRITCHARD Manhattan College JOHN WILEY & SONS, INC. CONTENTS CHAPTER 1 INTRODUCTION
جامعة البلقاء التطبيقية
AlBalqa Applied University تا سست عام 997 The curriculum of associate degree in Air Conditioning, Refrigeration and Heating Systems consists of (7 credit hours) as follows: Serial No. Requirements First
Refrigeration and Air Conditioning Mechanic On-the-Job Training Guide
Refrigeration and Air Conditioning Mechanic On-the-Job Training Guide Refrigeration and Air Conditioning Mechanics install, maintain and repair primary and secondary refrigeration and cooling systems,
LAMINAR FLOW CABINETS
LAMINAR FLOW CABINETS Vertical Laminar Flow Cabinets VLF 550 VLF650 VLF1000 VLF1200 VLF 1500 VLF1800 Monmouth Scientific's brand new range of Vertical laminar Flow (VLF) cabinets is available in six different
SYLLABUS For BASIC TRADE COURSE (360 Hours) On REFRIGERATION AND AIR CONDITIONING
SYLLABUS For BASIC TRADE COURSE (360 Hours) On REFRIGERATION AND AIR CONDITIONING INDEX 1. Introduction 3 2. Objectives 3 3. Employment Opportunity 4 4. Course Structure 4 5. Entry Qualification 4 6. List
LLB-OCMFM 2000 PORTABLE DOPPLER AREA-VELOCITY FLOWMETER
LLB-OCMFM 2000 PORTABLE DOPPLER AREA-VELOCITY FLOWMETER System for flow measurement, data acquisition and transmission for wastewater with long battery life With Long Life Battery Open Channel Flow Meter
HYDRAULICS. H91.8D/C - Computerized Open Surface Tilting Flow Channel - 10, 12.5, 15 and 20 m long
HYDRAULICS H91.8D/C - Computerized Open Surface Tilting Flow Channel - 10, 12.5, 15 and 20 m long 1. General The series of channels H91.8D has been designed by Didacta Italia to study the hydrodynamic
Designed for multi-injector endurance testing, the
Designed for multi-injector endurance testing, the ETB Test Bench can optionally provide shot-to-shot mass measurement. The injectors are precisely subject to variable controls and hydraulic pressures
Proposal for apprentice training in. South Africa. A cut above the rest, cause we train you best
Proposal for apprentice training in South Africa A cut above the rest, cause we train you best Why invest in ITC? ITC was founded in 2007. We have provided training for major airlines in Africa such as
An Energy Efficient Air Conditioner System without Compressor: Application of Embedded System
An Energy Efficient Air Conditioner System without Compressor: Application of Embedded System Poonam Shelke 1, Gajanan Malwatkar 2 Department of Electronics and Telecommunication Engineering, Dnyanganga
GRU Purchasing Material Group Codes
Title Code Trees and shrubs 10161500 Floral plants 10161600 Non flowering plants 10161800 Fertilizers and plant nutrients and herbicides 10170000 Pest control products 10190000 Minerals and ores and metals
Training for Operations and Maintenance
Oil and Gas Training and Competency Development Training for Operations and Maintenance Developing technical skills and building practical experience for E&P teams and professionals Training that meets
Druck PV 62x pneumatic/hydraulic pressure stations
GE Sensing & Inspection Technologies Druck PV 6x pneumatic/hydraulic pressure stations safety and quick reference guide - K08 A. PV 6: Pneumatic pressure station (Figure A.) -90 mbar to 0 bar (-3. to 300
SECTION 23 00 01 HEATING, VENTILATION AND AIR CONDITIONING EQUIPMENT
SECTION 23 00 01 HEATING, VENTILATION AND AIR CONDITIONING EQUIPMENT PART 1 - GENERAL 1.1 DESCRIPTION A. The Work specified in this Section consists of designing, furnishing and installing factory-assembled
Condensing unit type EPSILON-ECHOS LE Technical information manual
Condensing unit type EPSILON-ECHOS LE Technical information manual 2 > EPSILON ECHOS Water chiller > EPSILON ECHOS /HP Reversible heat pump > EPSILON ECHOS /ST Water chiller with storage tank and pumps
Cold Room & Refrigeration System (Casserole Assembly) No of units: 1
Technical Specifications Cold Room & Refrigeration System (Casserole Assembly) No of units: 1 For chiller storage of all sorts of items Chiller storage temperature: 2-5 C Provides excellent thermal efficiency
CIBSE Guide M: Maintenance engineering and management Statutory compliance legislation and guidance
CIBSE Guide M: Maintenance engineering and management compliance legislation and guidance Types of System/Plant Action required Frequency by Type of Fire and Smoke Fire extinguishers Discharge (not CO
Technical data. Danfoss DHP-A
Technical data Danfoss DHP-A An air heat pump which produces both heat and hot water Can operate efficiently down to -0 C Danfoss TWS tank gives plenty of hot water quickly and with low operating costs
Grove House School. Job Description: Cleaner/Caretaker. Headteacher/DeputyHeadteacher/School Business Manager. School staff and external community
Job Description: Cleaner/Caretaker Reports to Liaison with Job Purpose Headteacher/DeputyHeadteacher/School Business Manager School staff and external community To contribute to the smooth running of the
Arizona Health Care Association DISASTER PLANNING AND EMERGENCY MANAGEMENT GUIDE POST INCIDENT DAMAGE ASSESSMENT CHECKLIST
It is essential to perform a Basic Damage Assessment (BDA) following an adverse event to help ensure the safety of building occupants as well as prevent additional losses from occurring. This checklist
Index 11.1. Page. Pumping Systems...11.2-11.4 Intensifiers...11.5 Gas Boosters...11.6-11.7 High Pressure Generators...11.8-11.9
Pumping Systems, Intensifiers, Gas Boosters and High Pressure Generators High Pressure Equipment Company produces a number of components and systems for general industrial, elevated pressure applications.
Swissmetro travels at high speeds through a tunnel at low pressure. It will therefore undergo friction that can be due to:
I. OBJECTIVE OF THE EXPERIMENT. Swissmetro travels at high speeds through a tunnel at low pressure. It will therefore undergo friction that can be due to: 1) Viscosity of gas (cf. "Viscosity of gas" experiment)
T a b l e o f C o n t e n t s
w w w. g e n t e c h e a l t h c a r e. c o m M E D I C A L M O N I T O R I N G, A L A R M A N D C O N T R O L S Y S T E M S I n t e r n a t i o n a l E d i t i o n Technology for a Better Future Company
BRAZED PLATE INSTALLATION MANUAL
www.brazedplate.com BRAZED PLATE INSTALLATION MANUAL S.E.C. Heat Exchangers P.E.I. CANADA C0A 1A0 tel; 902-659-2424 fax; 902-659-2800 Table of Contents Description...2 Mounting position...3 Piping connections......3
FUNDAMENTALS OF CONTROL ENGINEERING
EQUIPMENT FOR ENGINEERING EDUCATION EQUIPMENT FOR ENGINEERING EDUCATION ENGINEERING MECHANICS & MACHINE ELEMENTS Statics Strength of Materials Dynamics Fundamentals of Engineering Design Machinery Diagnosis
Safe management of industrial steam and hot water boilers A guide for owners, managers and supervisors of boilers, boiler houses and boiler plant
Safe management of industrial steam and hot water boilers A guide for owners, managers and supervisors of boilers, boiler houses and boiler plant Health and Safety Safe management of industrial steam and
Automatic Fire Fighting Monitors
Automatic Fire Fighting Monitors Fire Protection Solutions Automatic Fire Fighting Monitors Foreword Automatic monitors are devices used to deliver large amounts of water or water/foam solution to remote
Improve competiveness of IDC and enterprise data centers with DCIM
Improve competiveness of IDC and enterprise data centers with DCIM This paper studies the implementation of modern DCIM systems for data centers to improve operational competitiveness with ATEN's DCIM
We have been working in an ideal climate for thirty years.
Underfloor cooling We have been working in an ideal climate for thirty years. A climate that has brought us to a position of leadership in Italy in the field of radiant heating and cooling. RDZ was the
P. A. Hilton Ltd REFRIGERATION & AIR CONDITIONING VAPOUR COMPRESSION HEAT PUMPS VENTILATION VOCATIONAL
REFRIGERATION & AIR CONDITIONING Refrigeration and air conditioning is an aspect of modern life that is accepted almost without thought. Food storage, the long distance transport of foodstuffs, stockpiling
INSTRUMENTATION AND CONTROLS
INSTRUMENTATION AND CONTROLS TRAINING EQUIPMENT ENGINEERING CORPORATION HAMPDEN INSTRUMENTATION AND CONTROLS TRAINING SIMULATORS Hampden Engineering Corporation has been designing and manufacturing process
INDIAN STANDARDS FOR NATURAL GAS PIPELINE SYSTEM
INDIAN STANDARDS FOR NATURAL GAS PIPELINE SYSTEM 1. IS 15663(Part 1):2006 This code covers requirements and recommendations for the design, materials, construction and testing of pipelines made of steel
OUR SERVICES. Training - Assessment - Events. Driving our industry forward. www.equipegroup.com. www.equipegroup.com
Driving our industry forward. OUR SERVICES Training - Assessment - Events EQUIPE TRAINING Geotechnical, Drilling and Health & Safety Training Health and Safety Courses IOSH Safe Supervision of Geotechnical
SAMPLE SCHEDULE OF VALUES APPLICATION & CERTIFICATE FOR PAYMENT
SAMPLE SCHEDULE OF S 1.00 General Conditions 1.01 Project Management 1.02 General Superintendent 1.03 Superintendents 1.04 Safety Engineer 1.05 Scheduling 1.06 Field Engineering 1.07 Bonds 1.08 Trailer
Applying LDV to Air and Water Flow Measurements: Research Activities & Accreditation. Matthew A. Rasmussen, Danish Technological Institute
Applying LDV to Air and Water Flow Measurements: Research Activities & Accreditation Matthew A. Rasmussen, Danish Technological Institute Euramet Flow Meeting Danish Technological Institute, Taastrup 10-12
Engineered Solutions
Engineered Solutions Long established partnerships bring together the world s leading instrumentation companies within BKW. Our manufacturing facility enables us to quickly adapt standard instruments to
Art.S001-S002 SOLAR MODULE WITH DELIVERY AND RETURN CONNECTIONS
Art.S001-S002 SOLAR MODULE WITH DELIVERY AND RETURN CONNECTIONS Technical Information sheet 0001/07/Rev01 ENG FUNCTION Series S001 and S002 circulation units are applied to the primary circuit of solar
SECTION 23 81 03 - PACKAGED ROOFTOP AIR CONDITIONING UNITS NON-CUSTOM
SECTION 23 81 03 - PACKAGED ROOFTOP AIR CONDITIONING UNITS NON-CUSTOM PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Packaged rooftop air conditioning unit (5 tons and smaller). 2. Roof curb. 1.2
National Competency Based Skill Training Refrigeration and Air-conditioning Mechanic Logbook
National Competency Based Skill Training Refrigeration and Air-conditioning Mechanic Logbook Trainee:... Training Provider:... Year:... Trainee Contact no:... Competency Based Skill Training Logbook Introduction
Food delivery & storage
screen 1 Food delivery & storage 7. Rubbish bags in the way of deliveries This screen shows a delivery scene with a number of potential hazards to food safety. As a starting point students are encouraged
Post graduate program for engineering leading to M.Tech in renewable energy systems with specialization in solar energy
Post graduate program for engineering leading to M.Tech in renewable energy systems with specialization in solar energy 1.0 Introduction India s growing energy needs mixed with world s order for reducing
Vacuum drying oven for non-flammable solvents
VD series 53 Vacuum drying ovens Vacuum drying oven for non-flammable solvents A BINDER vacuum drying oven of the VD series is impressive while gently drying with its homogeneous temperature distribution.
Steamfitters & Plumbers Local Union No. 464 JATC. HVAC/Service Curriculum. Work Process: Mechanical & Electrical Principles 4500 5400
Work Process Work Process: Approximate Process Hours: Mechanical & Electrical Principles 4500 5400 Ventilation, Air Conditioning & Refrigeration Controls 595 700 Heating & Steam Systems 1105 1300 Piping
Alpha System ADAPTABLE KEWAUNEE LABORATORY FURNITURE. encouraging new discovery
Alpha System ADAPTABLE LABORATORY FURNITURE KEWAUNEE encouraging new discovery Alpha 6 partition modules with Kemresin worktops. Minneapolis, Minnesota Alpha 6 partition modules with Alpha overhead service
Technical Notes NDT 001 Specific Requirements for Non- Destructive Testing Laboratories
ACCREDITATION SCHEME FOR LABORATORIES Technical Notes NDT 001 Specific Requirements for Non- Destructive Testing Laboratories Technical Notes NDT 001, Apr 14 The SAC Accreditation Programme is managed
RULES FOR THE SETTING UP OF SUSTAINABLE BRANCHES Summary
RULES FOR THE SETTING UP OF SUSTAINABLE BRANCHES Summary January 2013 TABLE OF CONTENTS INTRODUCTION... 3 GENERAL RECOMMENDATIONS... 3 Communication with customers in the field of environmental sustainability...
GOVERNMENT OF INDIA MINISTRY OF RAILWAYS TI/STR/028. (Revision 1)
GOVERNMENT OF INDIA MINISTRY OF RAILWAYS TI/STR/028 (Revision 1) SCHEDULE OF TECHNICAL REQUIREMENT FOR APPROVAL OF VENDORS FOR SUPPLY OF COMPLETE SUPERVISORY CONTROL AND DATA ACQUISITION SYSTEM FOR 25
Iterative calculation of the heat transfer coefficient
Iterative calculation of the heat transfer coefficient D.Roncati Progettazione Ottica Roncati, via Panfilio, 17 44121 Ferrara Aim The plate temperature of a cooling heat sink is an important parameter
Digital inductive conductivity transmitter
Digital inductive conductivity transmitter Optimal solution for conductivity measurements in difficult fluids (polluted, dirty,...) PEEK/PPA version for CIP applications Large range of process connections
Testing methods applicable to refrigeration components and systems
Testing methods applicable to refrigeration components and systems Sylvain Quoilin (1)*, Cristian Cuevas (2), Vladut Teodorese (1), Vincent Lemort (1), Jules Hannay (1) and Jean Lebrun (1) (1) University
ngenieros Ingenieros Asociados De Control S.L.
ngenieros sociados de ontrol 1 Company founded in 1985 to serve commercial and technical assistance in the fields of instrumentation, control and installation for all types of industries. We offer top
Think Of Us First! When It s Time to Distribute Your Plans
Think Of Us First! When It s Time to Distribute Your Plans CONSTRUCTION NOTEBOOK WILL LIST YOUR PLANS AND SPECS FREE CALL TODAY FOR DETAILS 702-876-8660 Why use Experience We have over 60 years of experience
Power consumption (kw)
OS Series Series description LIT OS systems are applied to wastewater disinfection. The models of this series were developed on base of high-efficiency low-pressure amalgam lamps and have all components
How does solar air conditioning work?
How does solar air conditioning work? In a conventional air conditioning system; The working fluid arrives at the compressor as a cool, low-pressure gas. The compressor is powered by electricity to squeeze
Eco Green Labs India Pvt. Ltd., Ground Floor, Plot No. 100, New Sidco Industrial Estate, Srinagar, Hosur, Tamil Nadu
Last Amended on - Page 1 of 5 I. DIMENSION $ 1. PLAIN PLUG S Upto Ø 100 mm 1.1 m Using ULM > Ø100 mm to Ø 300 mm 2.4 m 2. PLAIN RING S Upto Ø 100 mm 1.7 m Using ULM >Ø100 mm to Ø 300 mm 3.6 m 3. THREAD
BUILDING NAMING RIGHTS
NEW HEALTH SCIENCE BUILDING Davis Applied Technology College METHODSTUDIO INC. BUILDING NAMING RIGHTS NAMING RIGHTS OPPORTUNITIES Building Areas $500,000 Building Naming Right $100,000 LEED Gold Sponsorship