Audio and Video Door Entry System LIELBA - AD14

Transcription

1 Technical Teaching Equipment Audio and Video Door Entry System LIELBA - AD14 Products Products range Units 4.-Electricity ELEMENTS ALLOCATION ALI02 POR06 POR05 and POR07 POR04 POR08 Modules: ALI02= Main power supply. POR04= Video camera. POR05= Phone/monitor. POR07= Digital station. POR06= Lock. POR08= Video-interphone power supply. ISO: Certificate of Approval. Reg. No. E European Union Certificate Page 1 Certificates ISO 14001: 2004 and ECO-Management and Audit Scheme (environmental management) Worlddidac Member Worlddidac Quality Charter Certificate Worlddidac Member

2 SPECIFICATIONS Application, in metallic box, including the following modules: ALI02. Main Power Supply: Single -phase plug. 2 lamps. Terminals: L (line), N (neutral) and GND (ground). Security mushroom. Removable Key with two positions (ON and OFF) that works as the main switch. POR04. Video camera: Video camera and sound connection in order to stablish communication with the digital station. Input voltage: 2 terminals of 18 Vdc. Entrance hall door button. Adjust of the kind of bell and sound. One output terminal L (data and audio control). One relay output NO (2 terminals). POR05. Phone/monitor and POR07. Digital station: Digital station including a phone and a monitor. The station controls the video camera and lock modules. Input voltage: 2 terminals of 18 Vdc. One input terminal L (data and audio control). Adjustable sound. Entrance hall door control through video. Conectable to intercom system modules. POR06. Lock: Entrance hall door lock. Input voltage: 2 terminals of 12 Vac. Connectable to control module (entry phone). POR08. Video-interphone power supply: This module includes a power supply of 18 Vdc and 12 Vac, which is necessary for supplying the rest of the modules. Input voltage: 2 terminals of 230 Vac (L and N). 1 ground GND terminal. Input frequency: 50/60 Hz. Output voltage: 4 terminals: 2 of 18 Vdc and 2 of 12 Vac. Output current: 1.5 A. The module includes a current overload LED which indicates that the maximum current limit has been exceeded and the user must reduce the load. Two-pole automatic differential switch and two-pole automatic thermal-magnetic switch for the security of the elements. Cables and Accessories, for normal operation. Manuals: This unit is supplied with the following manuals: Required Service, Assembly and Installation, Starting-up, Safety, Maintenance and Practices Manuals. EXERCISES AND PRACTICAL POSSIBILITIES Some practical possibilities: 1.- Checking the main power supply (ALI02). 4.- Real application of an audio and video entry system. 2.- Checking the Video-interphone power supply (POR08). 3.- Communication between Video camera (POR04) and Phone/monitor (POR05) / Digital station (POR07). REQUIRED SERVICES Page 2 DIMENSIONS & WEIGHT -Electrical supply: single-phase, 220V./50 Hz or 110V./60 Hz. -Dimensions: 490 x 450 x 470 mm. approx. -Weight: (19.29 x x inches approx.). 25 Kg. approx. (55.12 pounds approx.).

3 Additional and optional: CAI. Computer Aided Instruction System Application Instructor Student/ Application With no physical connection between the application and computer, this complete package consists on an Instructor (INS/SOF) totally integrated with the Student/Application. Both are interconnected so that the teacher knows at any moment what is the theoretical and practical knowledge of the students. These, on the other hand, get a virtual instructor who helps them to deal with all the information on the subject of study. INS/SOF. Classroom Management Package (Instructor ). The Instructor has a whole range of options, among them: - Organize Students by Classes and Groups. - Create easily new entries or delete them. - Create data bases with student information. - Analyze results and make statistical comparisons. - Print reports. - Develop own examinations. - Detect student s progress and difficulties....and many other facilities. Examples of the screens Instructor This Instructor working in network configuration allows controlling all the students in the classroom. A.../SOF Computer Aided Instruction (Student/Application ). Student It explains how to use the application, run the experiments and what to do at any moment. - The options are presented by pull-down menus and pop-up windows. - This software contains: Theory: that gives the student the theoretical background for a total understanding of the studied subject. Exercises: divided by thematic areas and chapters to check out that the theory has been understood. Guided Practices: presents several practices to be done with the application, showing how to complete the exercises and practices. Exams: set of questions presented to test the knowledge obtained. For more information see CAI catalogue. Click on the following link: /products/catalogues/en/cai.pdf Page 3

4 Additional and optional: MUAD. Electric Power Data Acquisition System 1 2 Connections 3 points 4 n Application Cables to interface Electric power interface box (EPIB) Data acquisition software (MUAD/SOF) Cable to computer Data acquisition board (DAB) Student post MUAD is the perfect link between the application and the PC. MUAD is a continuous data acquisition system with virtual instrumentation, that measures, analyzes and represents the parameters involved in the process. MUAD allows voltage and current acquisition and measurement, data processing, frequency spectrum and all the functions of a digital oscilloscope. We easily connect the Electric Power Interface Box (EPIB) to the application with the supplied cables (there are several connection points placed for it). The EPIB is connected to the PC through the Data Acquisition Board (DAB), and by using the Data Acquisition software with virtual instrumentation, the student can get results from the undertaken experiment/practice, see them on the screen and work with them. MUAD System includes EPIB DAB MUAD/SOF: 1)Hardware: 1.1) EPIB. Electric power interface box ( dimensions: 300 x 180 x 120 mm. approx.): Interface that carries out the conditioning of the diverse signals that can be acquired in a process, for their later treatment and visualisation. In the front panel, the elements are separated in two parts: left-hand part for VOLTAGE sensors, and right-hand part for CURRENT sensors. 8 analog input channels. Sampling range: 250KSPS (Kilo samples per second). 4 Tension sensors AC/DC, 400V. 4 Current sensors. 1.2) DAB. Data acquisition board: PCI Data acquisition board (National Instruments) to Analog output: be placed in a computer slot. Number of channels=2. Bus PCI. Resolution=16 bits, 1 in Analog input: Maximum output rate up to: 833 KS/s. Number of channels= 16 single-ended or 8 Output range(v)= ± 10. differential. Data transfers=dma, interrupts, Resolution=16 bits, 1 in programmed I/0. Sampling rate up to: 250 KSPS (Kilo samples Digital Input/Output: Number channels=24inputs/outputs. per second). D0 or DI Sample Clock frequency: 0 to 1 Input range (V)= ± 10V. MHz. Data transfers=dma, interrupts, programmed I/0. Timing: Counter/timers=2. Number of DMA channels=6. Resolution: Counter/timers: 32 bits. EPIB DAB 2) MUAD/SOF. Data acquisition software: Data Acquisition with Graphic Representation: Friendly graphical frame. Compatible with actual Windows operating systems. Configurable software allowing the representation of temporal evolution of the different signals. Visualization of a tension of the circuits on the computer screen. Sampling velocity up to 250 KSPS. (Kilo samples per second). MUAD/SOF Main Screen 1.- Voltage channels section 2.- Current channels section 3.- Power spectrum section 4.- General control panel section Page 4

5 Some working possibilities: 1) CAI MUAD working possibility (complete EDIBON system) INS/SOF. Instructor A.../SOF. Student/Application CAI. Computer Aided Instruction System EPIB. Electric Power Interface Box DAB. Data Acquisition Board MUAD/SOF. Data Acquisition MUAD Electric Power Data Acquisition System 2) MUAD working possibility EPIB. Electric Power Interface Box DAB. Data Acquisition Board MUAD/SOF. Data Acquisition MUAD Electric Power Data Acquisition System 3) CAI working possibility INS/SOF. Instructor A.../SOF. Student/Application CAI. Computer Aided Instruction System 4) Simplest working possibility Specifications subject to change without previous notice, due to the convenience of improvements of the product. * REPRESENTATIVE: C/ Del Agua, 14. Polígono Industrial San José de Valderas LEGANÉS. (Madrid). SPAIN. Phone: FAX: edibon@edibon.com WEB site: Issue: ED01/12 Date: November/2012 Page 5