8146 Series Terminal Boxes

Transcription

1 Series Terminal oxes TERMINTION Ready-Term Terminal oxes Features: Pre-onfigured with terminals mounted Made of Fiberglass Reinforced Polyester (FRP) enclosure sizes with different depths For power and control circuits For I.S. circuits with blue terminals Entry hardware optional Field installation possible INNOVTIVE EXPLOSION PROTETION by R. STHL //0

2 TERMINTION Ready-Term Terminal oxes PRE-ONFIGURE FRP TERMINL OXES WITH PHOENIX TERMINLS LSSIFITIONS of / NE- lass I, Zones & Ex e II T/T lass I, ivision, Groups,,, lass II, ivision, Groups F,G lass III NEM, & X; IP File No. E7 E-lass I, Zones & Ex e II T/T lass I, ivision, Groups,,, lass II, ivisions &, Groups E,F,G lass III S ENLOSURES, & X; IP File No. LR 99- II G EEx e II T/T, Zones & II G EEx ia/ib II, II, II T PT 0 TEX II IPX, T, T9 or T LIE 0 TEX Max. Voltage 0 / mbient Temperature Range: / + (+ F) Max., T + (+ F) Max., T ( F) Min. / +7 (+7 F) Max., T ( F) Min. Special mbient Temperature Range:* / + (+ F) Max., T + (+ F) Max., T ( F) Min. / +7 (+7 F) Max., T ( F) Min. * onsult Factory FETURES The Ready-Term Series of terminal boxes are made of impact proof fiberglass reinforced polyester resin. They offer a one-source solution to the time-consuming process of providing ready to install terminal boxes for hazardous locations. With its single part number solution, the Ready-Term Series eliminates the inconvenience of purchasing the enclosure and individual parts. This Series is supplied with the indicated quantity of individually numbered terminals for each size of enclosure, fully certified and ready to be installed. The FRP Ready-Term Series are made of specially formulated impact proof glass fiber reinforced polyester which provides superior corrosion resistance while dissipating static electricity. Ordering Information TERM. QTY. WIRE RNGE WG. TERM. SIZE mm MX. MPS. PER TERM. TLOG NUMER FOR POWER & ONTROL IRUITS GRN. WIRE ON- NETIONS TLOG NUMER FOR INTRINSILLY SFE IRUITS -. /-P-* /-P-* -. /-P- /-P- - /-P-0 /-P /-P /-P- /-P- - /-P-0 /-P /-P /7S-P- /7S-P- - /7S-P-0 /7S-P-0 - /7S-P To Select Weidmuller Terminals hange P to W For dimensional data see page *With Phoenix terminals only onduit Hubs Mounted for Series Enclosures (Ex e) HU, NPT THRE SIZE P WIRE ONNE- TIONS ENLOSURE ORIENTTION TLOG NUMER /" /-0-NE m /" /-0-NE m " /-0-NE m /" /-0-NE m /" /-0-NE m " /-0-NE m /" /-07-NE m " /-0-NE m INNOVTIVE EXPLOSION PROTETION by R. STHL

3 Ready-Term Terminal oxes TERMINTION PRE-ONFIGURE FRP TERMINL OXES WITH PHOENIX TERMINLS Ordering Information TERM. QTY. WIRE RNGE WG. TERM. SIZE mm MX. MPS. PER TERM. TLOG NUMER FOR POWER & ONTROL IRUITS GRN. WIRE ON- NETIONS TLOG NUMER FOR INTRINSILLY SFE IRUITS P WIRE ON - NETIONS -. /7S-P- /7S-P- - /7S-P-0 /7S-P-0 - /7S-P /7S-P /0 0 /7S-P-/ /-P- /-P- ENLOSURE ORIENTTION LSSIFITIONS of / NE- lass I, Zones & Ex e II T/T lass I, ivision, Groups,,, lass II, ivision, Groups F,G lass III NEM, & X; IP File No. E7 E- lass I, Zones & Ex e II T/T lass I, ivision, Groups,,, lass II, ivisions &, Groups E,F,G lass III S ENLOSURES, & X; IP File No. LR 99- II G EEx e II T/T, Zones & II G EEx ia/ib II, II, II T PT 0 TEX - /-P-0 /-P-0 - /-P /-P /0 0 /-P-/ /-P- 7 /-P /-P-07 7 /-P /-P /9-P- 7 /9-P /9-P-07 7 /9-P /9-P /9-P /0 0 /9-P-/ /9-P-0 7 /9-P /9-P- 7 /9-P /9-P To Select Weidmuller Terminals hange P to W For dimensional data see page II IPX, T, T9 or T LIE 0 TEX Max. Voltage 0 / mbient Temperature Range: See Page In addition to the various North merican applications, this Series is PT certified for use in Zones and. The design conforms to ENELE EN 0 and IE and many others. onsult factory. PPLITION Typical applications include junction boxes for petrochemical plants, waste treatment facilities, oil refineries and other major industrial plants. s a product with certifications recognized globally, the Ready-Term Series is well suited for original equipment manufacturers who market throughout the world. The / Series of terminal boxes is intended for use on circuits designed for power and motor control applications. The / Series is intended for use on circuits which are intrinsically safe. These enclosures are outfitted with blue terminals to provide an indication to field personnel that the circuits are intrinsically safe and should not be confused with non-intrinsically safe circuits. These enclosure make it necessary for the metal entry hardware to be bonded to the ground system. Use the suitable / conduit hubs specified in the hub table on page. ustom enclosures can be configured upon customer request. The following modifications are available: onduit hubs (specify) able glands (specify) lose-up plugs (specify) Flange plates (specify) Screw-type terminals up to 0 MM age-clamp Terminals up to WG INNOVTIVE EXPLOSION PROTETION by R. STHL

4 TERMINTION Series Terminal oxes INSTLLTION OF ENTRY HRWRE Method : Installation using a hole through the enclosure with a brass back plate (see page with a threaded opening and increased safety ground terminal. The Series of FRP terminal boxes are available with factory installed conduit hubs for conduit installation or with cable glands for cable installation. pproved and suitable for the location entry hardware can also be field installed. These enclosures make it necessary for the metal cable glands or conduit hubs to be bonded to the ground system. This can be accomplished by installing them to a threaded brass back plate as shown with Method (shown on the upper half of this page), or with grounding nuts, according to Method (shown on the lower half of this page). rass Plate(s) must be connected to internal grounding system using jumper wires. Method : Installation using a hole through the enclosure with an Ex e grounding locknut instead of a brass back plate. Table for max. numbers of entry openings either installed with conduit hubs / (see page ) or TM cable glands. UTION: The max. possible number of entries which can be installed on the sides of the enclosures depends on the number of terminal columns installed. With horizontally installed columns, there are no side entries possible or only limited, depending on enclosure size. With vertically installed columns there are no bottom or top entries possible, or only limited, depending on enclosure size. These locknuts must be bonded between each other and to the grounding system using a jumper wire. INNOVTIVE EXPLOSION PROTETION by R. STHL

5 Series Terminal oxes TERMINTION INSTLLTION OF / ONUIT HUS OR TM LE GLNS /.0 /.0 w/o flanges w/o flanges Size / / / / /" /" " - -/" - - -/" " /.0/.0 Size w/o flanges with flanges / / / / /" - /" - " - -/" - - -/" " /.0/.0 Size w/o flanges with flanges / / / / /" /" " -/" - - -/" " Table for max. numbers of entry openings either installed with conduit hubs / (see page I) or TM cable glands. UTION: The max. possible number of entries which can be installed on the sides of the enclosures depends on the number of terminal columns installed. With horizontally installed columns, there are no side entries possible or only limited, depending on enclosure size. With vertically installed columns there are no bottom or top entries possible, or only limited, depending on enclosure size. -/" /" /" " " " /.07/.07 /.07/.07 /.S7 /.S7 w/o flanges with flanges Size w/o flanges with flanges Size w/o flanges with flanges Size w/o flanges with flanges Size / / / / / / / / / / / / / / / / /" /" /" 7 - /" - /" /" 9 9 /" - /" - 9 " " " - " - -/" - - -/" -/" - - -/" - -/" /" -/" /" - " " " " - -/" /" -/" /" - - " " - - " " /.0/.0 /.0/.0/.0 /.09/.09 /.09/.09 w/o flanges with flanges Size w/o flanges with flanges Size w/o flanges with flanges Size w/o flanges with flanges Size / / / / / / / / / / / / / / / / /" 7 /" /" 7 /" /" /" /" /" 9 " " " " -/" - - -/" -/" /" -/" /" -/" /" 7 " " " " -/" /" -/" /" " " - - " " - - INNOVTIVE EXPLOSION PROTETION by R. STHL

6 TERMINTION Series Terminal oxes PRTS N ESSORIES ILLUSTRTION/ESRIPTION TLOG NUMER ILLUSTRTION/ESRIPTION TLOG NUMER rass Plates for Flange Plates Flange Plates Size in FRP To bond metal cable glands for Flange Size rass Plates for Enclosures without Flange Side Plates / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 07 / 0 / 0 / 07 & / 0 / 07 / 0 / S7 / 0 / 0 / S7 / 0 / 0 /.0 / 0 / 0 / 0 & / 0 / 0 & / 0 / 0 / 09 / 0 / 0 / 0 Flange Plates Size Flange Plates Size oupling Frames Versions 0.",mm thick ",mm thick For Mounting on: Enclosure Sides / 0/ 0 / / 0/ 0 /// / 07/ 07 /// / S7 / / 0/ 0 /// / 09/ 09 /// 0.",mm thick ",mm thick For Mounting on: Enclosure Sides / 07/ 07 / / S7 / / 0/ 0/ /// / 09/ 09 /// 0.",mm thick ",mm thick 9 0 For Mounting on: Enclosure Sides / 07/ 07 / Size 0." x." 0 0 ( mm x mm) Size.0" x." 0 0 ( mm x mm) Size.7" x.9" 0 0 ( mm x mm) Size.9" x.9" 0 ( mm x mm) / 09 & / 0 / 09 / 0 / 0 Flange-enclosure 0 Entry Hubs / mounted (see page and ) / part only (see page I) INNOVTIVE EXPLOSION PROTETION by R. STHL

7 Series Terminal oxes TERMINTION IMENSIONS." 9mm."." 9mm.".mm R."." mm / 0." mm." 9mm." R." 9mm." mm.9" mm."." 9mm.".mm / 0." mm." 9mm." R.9" mm.9" mm." 9mm."." mm / 0." mm d.9" mm R.9" mm."." 9mm.9" mm.9" mm." / 0." mm d.9" mm R."."." 9mm.mm.".mm / 07.9" mm."." mm d.9" mm.".mm.".mm R." / S7 Flange option: dd to overall dimensions. Flange Thickness."." 9mm imension F 0.".mm 0." 0.".mm 0." mm." mm." mm d." R." 9mm.".mm.".mm / 0.".".mm d." mm F vailable Enclosure epth (d) Enclosure Sizes.".".9".7" 7." 9.0" 9mm mm 0mm mm mm mm / 0 x / 0 x / 0 x x / 0 x x / 07 x x x - x - / S7 x - x / 0 x x x x x x / 09 x x x - x - X indicates depths available.." 9mm R.".mm.".mm.0".mm.".mm / 09.".".mm.".mm d." mm INNOVTIVE EXPLOSION PROTETION by R. STHL

8 TERMINTION / Series Terminal oxes Terminal ata Terminal Type solid/stranded Max. Max. Torque Phoenix wire range voltage, V lb-in Electrical apacity Tables (only applicable for lass I, Zone Ex e) In lass I, Zone hazardous (classified) areas, heat produced by current in the wire inside an enclosure is a concern. Therefore, the continuous current of each current carrying conductor, the quantity and the size of the conductors inside a terminal enclosure needs to be limited. For each enclosure size, there is one table which shows the permissible values for that particular terminal enclosure. How to use the electrical capacity tables: etermine the enclosure type you are dealing with. Reference the applicable electrical capacity table printed on pages -. In the white area of the table the permitted numbers of current carrying conductors inside the enclosure are indicated (in and out counts two wires) depending on wire size and continuous current. In the green shaded area of the table additional conductors/terminals are permitted up to the space limit of the enclosure. (see pages & ) In the area with red diagonal lines no conductors/terminals are permitted. Jumper links and ground wires can be neglected, in calculating the number of wires. These can be added whenever necessary. UK. N UK N UK N UK -Twin UK N - 0 UK N UK N UK -/ Terminal Type Weidmueller WU WU WU - 0. WU - 0. WU - 0 WU - 0 WU -/0 0 7 WU -0 0 WFF WFF Terminal Type Wago -9-0 N/ N/ -9-0 N/ -9-0 N/ -9-0 N/ EXMPLE: Enclosure type: /-P-0 (see page ). The maximum physical quantity of terminals - WG for this enclosure is. Reference the table / on page 9, you will find that wires WG with continuous current is the thermal limit of this enclosure. onclusion: To terminate wires, 9 terminals are needed, terminating two wires per terminal only. The remaining terminals ( - 9 = ) can be used for low amperage circuits in the green shaded area of the table. Jumper links and ground wires can be neglected. Mixed circuits of different wire sizes and current values are possible by applying the table values proportionally i.e. enclosure table /. Wire Size WG Number of arrying onductors Permissible actual Proportion % % 0% Max. 7 INNOVTIVE EXPLOSION PROTETION by R. STHL

9 / Series Terminal oxes TERMINTION ELETRIL PITY TLES, PPLILE FOR LSS I, ZONE ONLY Enclosure / Enclosure / Wire size WG Wire size WG Enclosure / Wire size WG 7 7 Enclosure / Wire size WG Enclosure / Wire size WG 7 7 Enclosure / 7 Wire size WG 7 INNOVTIVE EXPLOSION PROTETION by R. STHL

10 TERMINTION / Series Terminal oxes ELETRIL PITY TLES, PPLILE FOR LSS I, ZONE ONLY Enclosure / Enclosure / 7 Wire size WG Wire size WG 7 Enclosures /7 and /S7 Enclosures /7 and /S7 0 Wire size WG Wire size WG INNOVTIVE EXPLOSION PROTETION by R. STHL

11 / Series Terminal oxes TERMINTION ELETRIL PITY TLES, PPLILE FOR LSS I, ZONE ONLY Enclosure /7 and /S7 Enclosures /7 and /S Wire size WG /0 / Wire size WG/MM /0 9 /0 /0 /0 0 Enclosure / Enclosure / Wire size WG 77 / Wire size WG /0 0 INNOVTIVE EXPLOSION PROTETION by R. STHL

12 TERMINTION / Series Terminal oxes ELETRIL PITY TLES, PPLILE FOR LSS I, ZONE ONLY INNOVTIVE EXPLOSION PROTETION by R. STHL Enclosure / Wire size WG/MM /0 /0 /0 7 / Enclosure / Wire size WG/MM /0 /0 /0 / Enclosure / Wire size WG/MM /0 /0 /0 /0 0 Enclosures / Wire size WG/MM /0 /0 /0 / Enclosure /9 Wire size WG /0 0 Enclosure /9 Wire size WG /0

13 / Series Terminal oxes TERMINTION ELETRIL PITY TLES, PPLILE FOR LSS I, ZONE ONLY Enclosure / Wire size WG/MM /0 7 7 /0 /0 / Enclosure / Wire size WG/MM / /0 /0 / INNOVTIVE EXPLOSION PROTETION by R. STHL

14 NOTES Notes INNOVTIVE EXPLOSION PROTETION by R. STHL