Handset. Setup Guide

Transcription

1 Handset Setup Guide

2

3 Table of Contents Getting started with your Budii Handset 2 Budii Handset overview 3 Firstly, charge your Budii handset 5 Pairing to your Budii Modem 7 Making a phone call 10 Get started with Budii Voic 11 Surfing the web 13 Using a Micro SD card 14 Software updates 15 Connecting to Wi-Fi 18 *If you have obtained a Budii Handset as a stand-alone from your Budii Modem, you will need to follow these instructions.

4 2 Getting started with your Budii Handset Budii Handset overview Charging your new handset Pairing to your Budii Modem Making a phone call Get started with Budii Voic Surfing the web Using a Micro SD card Performing software updates Connecting to Wi-Fi

5 3 BUDII HANDSET OVERVIEW Speaker Proximity Sensors Charging Light Touchscreen (Home Menu) Launcher Menu Button Make Call Back Button ii Home End Call Microphone

6 4 Proximity Sensors Helps your phone to detect when it s near your ear, to prevent accidental touchscreen commands. Charging light Illuminates when the handset is charging. ii Home When your handset is off, press and hold ii Home for 5 seconds to turn it on. Press and hold ii Home to turn your handset off. Press ii Home once to access the Home screen. Touchscreen The screen you ll use to control your handset. Touch icons to launch applications. Home Screen The Home screen shows commonly used applications. Reach this any time by pressing ii Home. Launcher Shows a screen with all your handset s applications. Back button Press the Back button to go back to the previous screen. Menu button While using an application, press the Menu button to see more options. Phone Press the Phone button to launch the Phone dialling pad. End call Press the End Call button to end a call.

7 5 FIRSTLY, CHARGE YOUR BUDII HANDSET Before you get started making calls, the first thing you ll need to do is charge your handset s battery for at least 24 hours. Doing this is important as it preserves the battery s capacity. To charge your handset on the Budii Modem: Make sure your Budii Modem is connected to power. Insert the battery included with your Budii Handset. Place your handset in the charging position on the Budii Modem, as shown in the image below. When you see the white charging light illuminate, the handset is charging.

8 6 To charge your handset on a Budii picture frame charger: Make sure the picture frame charger is connected to power. Insert the battery included with your Budii Handset. Place your handset in the charging position, as shown in the image below. When you see the white charging light illuminate, the handset is charging. Here s what happens when you charge a Budii Handset If the battery is empty, then it will take approximately 25 minutes for the handset to turn on again and the charging light will take at least 20 minutes to illuminate. Once the charging light has illuminated, the handset will continue to charge. Press ii Home on the bottom of your handset to turn it on. If your handset is sufficiently charged, the device will turn on and boot up. You can continue to charge your handset while it s on. The screen will dim after a few minutes of inactivity. Press ii Home to wake up the handset.

9 Additional Budii Handset 7 Pairing to your Budii Modem PAIR YOUR NEW HANDSET WITH YOUR BUDII MODEM FOR PHONE CALLS Make sure you re in the same room as the Budii Modem before you start this process, and that the Budii Modem is switched on. 1. From your handset s Home screen, press the Launcher. 2. From the list of applications, press Settings. 3. Press DECT Settings. 4. Press Handset Settings.

10 Additional Budii Handset 8 Base register Pair Button 5. Press Registration. 6. For this step, go to your Budii Modem. 7. Press Register. Press and hold the Pair button on the Budii Modem s back panel for 5 seconds.

11 Additional Budii Handset 9 CONNECTION STRENGTH Wait a few moments while the handset pairs with Budii then press OK to complete the process. 10. Press the iihome button to go back to the home screen. The Connection Strength with Budii is shown by this icon:

12 10 MAKING A PHONE CALL Once your Budii Handset is charged, you re ready to make phone calls. To make a phone call with your Budii Handset: 1. With your Budii Handset turned on: press the green Make Call button, or press the green Phone icon from the home screen. 2. From the number keypad, type the number you want to call. 3. To start the call, press the green Phone icon on the number keypad. 4. Press End Call to hang up.

13 11 GET STARTED WITH BUDII VOIC When you use your Budii Modem for the first time, Voic is turned on by default. This means that your Budii Modem will take messages for your land line (PSTN) and your iinet Netphone service, if you ve set up Netphone Voic . For more information on this, and other advanced Voic features, see the Budii User Manual. If you miss a call, your caller will hear the default greeting and will be able to leave a message. The message indicator on the bottom-left of the Budii Modem shows you how many messages you have. MESSAGE INDICATOR

14 12 To play your Budii Voic messages: 1. Press the Voic icon from your handset s home screen. 2. Press Budii Voic . 3. Press Play/Pause to play back your messages. If you want, customise your Voic greeting by pressing Record Greeting. 4. Press Exit to exit Voic .

15 13 SURFING THE WEB Please be sure that you have connected the handset to the web by following the section titled Connecting to Wi-Fi. 1. From the Budii Handset s home screen, press the Browser icon. 2. Press the Address bar and type either: a URL - for example net.au a search term - for example funny cat videos. 3. When you ve finished typing, press Go.

16 14 USING A MICRO SD CARD MicroSD cards are not included with your Budii Handset. However, you can use your own MicroSD card to access portable music or other media content on your Budii Handset. 1. Remove the battery cover from the back of your Budii Handset. 2. Insert the MicroSD card, logo facing up, into the slot (figure 1). 3. Gently push the card into the slot until it clicks into place. 4. Access the content of your MicroSD card through the File Explorer (figure 2). (figure 1) (figure 2)

17 15 SOFTWARE UPDATES From time to time we will send software updates over the iinet network. To update your Budii Handset software, follow these instructions. NOTIFICATIONS BAR Swipe down to open 1. If a software update is available, the Software Update Notification icon is displayed in the Notifications bar. 2. Swipe down the Notifications bar. 3. Press New software update is available. 4. Wait while your handset finds the new software. Please note: your Budii handset will need to be connected to the internet (WI-FI) to download software updates. Refer to instructions on connecting your handset to WI-FI. You will also need to have your handset on the charger to process the software update.

18 16 5. Press Start Update. 6. Press Yes. 7. Wait while the software update downloads to your phone. 8. When the download has finished, this message appears. Press Yes.

19 17 9. Wait while your handset checks that the software has downloaded correctly. 10. Your handset will automatically install the new software and reboot. You ll see this loading screen - when the handset has finished booting, the software update is complete. Whilst downloading the software, the icon will appear in your notifications bar. You can pull down the notifications bar to see the progress. Place your Budii Handset on to the charging rail on the Budii Modem to enable the software update.

20 Additional Budii Handset 18 CONNECT YOUR NEW HANDSET TO THE BUDII MODEM S WI-FI NETWORK 1. From your handset s Home screen, press the Launcher. 2. From the list of applications, press Settings. 3. Press Wireless & Networks. 4. Tick Wi-Fi.

21 Additional Budii Handset Press Wi-Fi Settings. 6. Press WPS Connect. 7. Press Connect. 8. For this step, go to your Budii Modem. Press and hold the WPS button on the Budii Modem s back panel for 5 seconds.

22 Additional Budii Handset 20 CONNECTION STRENGTH 9. Wait a few moments while your handset connects to the Budii home network. When the handset has finished connecting, you ll see something like this. 10. Press iihome to return to the Home screen. The signal strength is indicated by the Wi-Fi icon:

23

24 22 HOORAY! Your Budii Handset is up and running. If you re still having trouble, please contact your Budii Support for assistance. iinet Support iinet Business Support Westnet Support Internode Support TransACT Support