SAFELEC I N S U L A T E D C O N D U C T O R B A R S 6 0 u p t o A m p

Transcription

1 I N S U L A T E D C O N D U C T O R B A R S 6 0 u p t o A m p Finger safe up to IP2 60 to 1000 Amp conductors in Standard or Medium Heat Cover shaped to shed water and dust Horizontal conductors with contact from underside Bar length: 4.5 metres Systems up to 150 metres without expansion sections Reduced and simple maintenance Certificate No. FM 21334

2 C ONTENTS PAGE: SAFELEC Insulated Conductor Bars Typical Applications Selection of Conductors Technical Data SAFELEC 2: Technical Data Galvanised Steel Conductor Bars; Expansion Sections Copper Conductor Bars; Expansion Sections Aluminium / Stainless Steel Conductor Bars; Expansion Sections Joints Jointing Compound Powerfeeds: End Powerfeed; Joint Powerfeed Hanger Clamps: Standard Mount; Lateral Mount Hanger Clamps: with Insulator Anchor Clamps End Caps Pick Up Guides Isolation Sections: Galvanised Steel Bar; Copper Bar; Aluminium / Stainless Steel Bar Collectors Collector Shoe + Holder Collector Bracket Brackets: SAFELEC 3: V BAR: Single Sided Bracket; Double Sided Bracket; Web Bracket; Girder Clamp System Dimensions Component Dimensions Component Dimensions (Continued) Component Dimensions (Continued) Technical Data Copper Conductor Bars; Expansion Sections Aluminium / Stainless Steel Conductor Bars; Expansion Sections Joints Jointing Compound Powerfeeds: Joint Powerfeed Powerfeed Sections: Copper Bar; Aluminium / Stainless Steel Bar Hanger Clamps: Standard Mount; with Insulator Anchor Clamps End Caps Isolation Sections: Copper Bar; Aluminium / Stainless Steel Bar Collectors Collector Shoe + Holder Collector Bracket Brackets: System Dimensions Component Dimensions Single Sided Bracket; Double Sided Bracket; Web Bracket; Girder Clamp Technical Data Copper Conductor Bars; Expansion Sections; Isolation Sections Aluminium / Stainless Steel Conductor Bars; Expansion Sections; Isolation Sections Joints Powerfeeds: Joint Powerfeed Hanger Clamps: with Insulator Anchor Clamps End Caps Collectors Collector Shoe + Holder Component Dimensions Notes page Notes page Notes page

3 INSULATED CONDUCTOR SAFELEC BARS INSUL 8 supplies electrical power feed systems for moving machinery. Easy to install and maintain, the SAFELEC range ensures a high level of reliability. It has been designed to meet the safety standards demanded in industry. Advantages of conductor bars: - Ability to feed several moving machines from the same conductor system - Suitable for high amperage - Feed points can be placed at any location - Compactness - Long system length possible - Suitable for both indoor and outdoor use Range of application: Workshop cranes, iron and steel industry, railways, leisure industry, mines etc. SAFELEC features: - Easy installation, reduced and simple maintenance - Protection degree IP2, finger safe - Insulating s shaped to shed water and dust - Standard PVC for normal temperatures - Medium Heat available for high ambient temperatures - Expansion sections not required for runs less than 150 m - Max travel speed: 200 m/min SAFELEC complies with the following international standards: NFC , NFC , NFC , VDE 0470, BSEN 60529, DIN TYPICAL APPLICATIONS Roller Coaster Multipole Feed System Conveyor System Bridge Construction Crane Water Treatment Works 3

4 SELECTION OF CONDUCTORS Volt drop calculation ³U: 3-Phase AC Single Phase AC Continuous current DC ³U = 3 x I x D x Z ³U = 2 x I x D x Z ³U = 2 x I x D x R ³U% = (³U x 100) / U n Where: ³U: volt drop in Volts ³U%: volt drop in % of nominal voltage U n : nominal supply voltage in Volts I: maximum current in Amps D: see opposite diagram R: resistance in Ohms per metre Z: impedance in Ohms per metre L L/2 L/4 L/6 L/6 L/2 L/10 L/10 End feed D = L Centre feed D = L/2 Feed point at each end D = L/4 Feed point at L/6 from each end D = L/6 Feed point at L/10 and L/2 from each end D = L/10 TECHNICAL DATA Standard Medium Heat Ta FACTOR K Duty 100% 80% 60% 40% 20% 25 0 C C C C C C C The maximum permissible continuous current rating of the conductor bar depends on the duty factor of the cranes and the maximum ambient temperature Ta. It can be established using the following formula: I allowable = nominal current x K 4

5 SAFELEC 2 TECHNICAL DATA CONDUCTOR BAR COVER STANDARD MEDIUM HEAT Material Dielectric strength Surface resistivity Volume resistivity PVC 180 KV/cm ž >10 15 ž/cm BAYBLEND 240 KV/cm >10 14 ž >10 16 ž/cm Vicat softening temperature (never expose PVC to temperatures in excess of 80 o C) Flame-test Oxygen index Specific density 84 0 C Self extinguishing 54% 1.5 g/cm C Self extinguishing 24% 1.15 g/cm 3 CONDUCTOR BAR GALVANISED STEEL COPPER ALUMINIUM / STAINLESS STEEL Nominal current 60A 100A 125A 160A 250A 400A 200A 315A 400A Cross sectional area 50mm 2 63mm 2 93mm 2 50mm 2 63mm 2 93mm 2 104mm 2 120mm 2 156mm 2 Maximum system voltage (AC) (contact Insul-8 for other voltages) (DC) (contact Insul-8 for other voltages) Resistance R (for DC) at 20 0 C (ž/m) Impedance Z (for AC) at 20 0 C (ž/m) Maximum allowable ambient temperature for 100% duty cycle 25 0 C 25 0 C 25 0 C 25 0 C 25 0 C 25 0 C 25 0 C 25 0 C 25 0 C Bar length 4.5m 4.5m 4.5m 4.5m 4.5m 4.5m 4.5m 4.5m 4.5m Support pitch Standard 1500mm 1500mm 1500mm 1500mm 1500mm 1500mm 1500mm 1500mm 1500mm Lateral 1125mm 1125mm 1125mm 1125mm 1125mm 1125mm 1125mm 1125mm 1125mm Minimum pitch centres Standard 43mm 43mm 43mm 43mm 43mm 43mm 43mm 43mm 43mm Lateral 60mm 60mm 60mm 60mm 60mm 60mm 60mm 60mm 60mm Expansion sections: not required for runs less than 150m 150m 150m 150m 150m 150m 150m 150m 150m Minimum bending radius: (horizontal only) 1.5m 1.5m 1.5m 1.5m 1.5m 1.5m 1.5m 1.5m 1.5m An accurate choice of conductors can be made when all the following information is known: - The type of current: single or three phase AC ; continuous (DC) - The maximum current power and duty cycle - The allowable volt drop for the machines being supplied - The ambient temperature - Environment (dusty, coastal, humid, acidic etc.) SAFELEC 2 5

6 GALVANISED STEEL CONDUCTOR BARS CURRENT RATING 60A 100A 125A Medium Heat (grey) Phase Earth Standard Phase Standard Earth Medium Heat EXPANSION SECTIONS CURRENT RATING 60A 100A 125A Medium Heat (grey) Phase Earth Expansion sections are required on all systems over 150m long. Expansion section The maximum gap of the expansion section is 50mm. The expansion section is 4.5m long and is installed in place of one length of conductor bar. 6 SAFELEC 2

7 CURRENT RATING 160A 250A 400A COPPER CONDUCTOR BARS Medium Heat (grey) Phase Earth Standard Phase Standard Earth Medium Heat EXPANSION SECTIONS CURRENT RATING 160A 250A 400A Medium Heat (grey) Phase Earth Expansion section Expansion sections are required on all systems over 150m long. The maximum gap of the expansion section is 50mm. The expansion section is 4.5m long and is installed in place of one length of conductor bar. SAFELEC 2 7

8 ALUMINIUM / STAINLESS STEEL CONDUCTOR BARS CURRENT RATING 200A 315A 400A Medium Heat (grey) Phase Earth Standard Phase Standard Earth Medium Heat EXPANSION SECTIONS CURRENT RATING 200A 315A 400A Medium Heat (grey) Phase Earth Expansion sections are required on all systems over 150m long. Expansion section The maximum gap of the expansion section is 50mm. The expansion section is 4.5m long and is installed in place of one length of conductor bar. 8 SAFELEC 2

9 JOINTS JOINT Steel Copper Aluminium Heavy Duty Copper Steel Joint JOINT COVER Heavy Duty Medium Heat Copper Joint black green Heavy Duty Joint Heavy Duty Copper Joint Aluminium Joint JOINTING COMPOUND JOINTING COMPOUND Jointing compound should be applied to the contact surfaces of the joint and bar at every joint on copper and aluminium systems. One tube is sufficient for over 300 connections. POWERFEEDS: END POWERFEED End Powerfeed UP TO 100A Powerfeed installed in place of an end. Maximum cable connection size: 16mm 2 POWERFEEDS: JOINT POWERFEED CURRENT RATING UP TO 60A UP TO 250A UP TO 400A Standard Medium Heat (red) Powerfeed for connection of one or two flexible cables has single cable connection has double cable connection. 60A Joint Powerfeed A Joint Powerfeed Powerfeed is usually installed in place of a joint. Maximum cable connection size: 60A 10mm 2 250A 95mm 2 400A 150mm 2 SAFELEC 2 9

10 HANGER CLAMPS: STANDARD MOUNT STANDARD (BLACK) POLYCARBONATE (RED) Single pole Two pole Three pole Four pole Two pole hanger Standard hangers are acetyl. Maximum support spacing is 1.5m. Single pole hanger Four pole hanger HANGER Three pole hanger CLAMPS: LATERAL MOUNT STANDARD (BLACK) POLYCARBONATE (RED) Single pole Two pole Three pole Four pole Four pole (without spacer) Lateral mount hangers are supplied with 20mm spacers to provide clearance for joint s. Single pole lateral mount hanger Maximum support spacing is 1.125m. Four pole lateral mount hanger SAFELEC 2

11 Single pole Single pole Single pole Single pole Two pole (Black) (Red) Stainless steel Two part Two part HANGER SAFELEC CLAMPS: WITH INSULATOR Single pole hanger Two pole two part hanger In particularly dusty or humid environments, hangers with insulator should be used. Stainless steel hanger with insulator Single pole two part hanger Standard With insulator Lateral mount Without top bolt (two required per anchor point) ANCHOR CLAMPS Anchor clamp Anchor clamp with insulator Anchor clamp without top bolt Anchor points are usually situated in the middle of a conductor system. Additional anchor points are required for systems with expansion sections. Heavy duty anchor Heavy duty anchor clamp SAFELEC 2 11

12 END CAPS Steel / copper bar Aluminium bar Transfer cap End cap for steel / copper bar Transfer caps are suitable for air gaps up to 10mm. Transfer end cap Vertical tolerance Horizontal tolerance +_ 5mm +_ 2mm PICK UP GUIDES Single pole Two pole Three pole Four pole Special collectors are required for systems where pick up guides are fitted. Four pole pick up guide SAFELEC 2

13 GALVANISED STEEL BAR CURRENT RATING 60A 100A 125A ISOLATION S ECTIONS Medium Heat (grey) phase earth Isolation section Isolation sections provide electrical separation between adjacent sections of conductor bar. Only for use in dry, clean conditions. COPPER BAR CURRENT RATING 160A 250A 400A Medium Heat (grey) phase earth The Isolation section is 4.5m long and is installed in place of one length of conductor bar. It is recommended that Isolation sections are not fitted in earth conductors. Isolation section ALUMINIUM / STAINLESS STEEL CURRENT RATING 200A 315A 400A Medium Heat (grey) phase earth Isolation section SAFELEC 2 13

14 COLLECTORS CURRENT RATING 50A 100A 250A Phase Earth - without deflector Earth - right hand Earth - left hand A Phase Collector A Collector (Earth left) A and 100A collectors are supplied without cable. Stranded cable terminal clamps are included. 250A collectors are supplied with 2 x 1m 35mm 2 cable. 100A Phase Collector A Collector (Earth left) A Collector COLLECTOR SHOE + HOLDER CURRENT RATING Code 50A + 100A Phase - red A + 100A Earth - green A The copper graphite shoe ensures electrical continuity, a smooth contact with the conductor bar and a good resistance to wear. 50 / 100A Collector Shoe and Holder A Collector Shoe and Holder SAFELEC 2

15 13mm SQUARE 25mm SQUARE COLLECTOR BRACKET Single Double Single collector bracket Double collector bracket mm square, 200mm long for use with 50A collector. Single collector bracket Double collector bracket mm square, 400mm long for use with 100A and 250A collectors BRACKETS: SINGLE SIDED BRACKET to suit beam flange mm to suit beam flange mm BRACKETS: DOUBLE SIDED BRACKET to suit beam flange mm to suit beam flange mm BRACKETS: WEB BRACKET BRACKETS: GIRDER CLAMP SAFELEC 2 15

16 SYSTEM DIMENSIONS STANDARD HANGER CLAMPS HANGER CLAMPS WITH INSULATOR 16 SAFELEC 2

17 C OMPONENT DIMENSIONS STEEL JOINT (310872) 60A STANDARD PHASE COVER - Expansion Section (310007) ALUMINIUM JOINT (310874) STANDARD PHASE COVER (310850) END POWERFEED (310911) 60A JOINT POWERFEED (310034) 250A JOINT POWERFEED (310910) 250A JOINT POWERFEED (310910) SINGLE POLE HANGER CLAMP Standard Mount (310824) 400A JOINT POWERFEED (310912) SAFELEC 2 17

18 C OMPONENT DIMENSIONS (Continued) TWO POLE HANGER CLAMP Standard Mount (310882) THREE POLE HANGER CLAMP Standard Mount (310861) FOUR POLE HANGER CLAMP Standard Mount (310821) SINGLE POLE HANGER CLAMP with Insulator (310918) STAINLESS STEEL HANGER CLAMP with Insulator (310827) ANCHOR CLAMP (310832) ANCHOR CLAMP With Insulator (310969) END CAP for Steel / Copper Bar (310892) END CAP for Aluminium Bar (310893) TRANSFER END CAP (310951) 18 SAFELEC 2

19 C OMPONENT DIMENSIONS (Continued) STANDARD PHASE COVER Isolation Section (310025) SINGLE COLLECTOR BRACKET 13mm square (310994) SINGLE COLLECTOR BRACKET 25mm square (310991) DOUBLE COLLECTOR BRACKET 13mm square (310898) SINGLE SIDED BRACKET (310980) SINGLE SIDED BRACKET (310982) DOUBLE SIDED BRACKET (310981) DOUBLE SIDED BRACKET (310983) GIRDER CLAMP (310985) WEB BRACKET (310984) SAFELEC 2 19

20 SAFELEC 3 TECHNICAL DATA CONDUCTOR BAR COVER STANDARD MEDIUM HEAT Material Dielectric strength Surface resistivity Volume resistivity PVC 180 KV/cm ž >10 15 ž/cm BAYBLEND 240 KV/cm >10 14 ž >10 16 ž/cm Vicat softening temperature (never expose PVC to temperatures in excess of 80 o C) Flame-test Oxygen index Specific density 84 0 C Self extinguishing 54% 1.5 g/cm C Self extinguishing 24% 1.15 g/cm 3 CONDUCTOR BAR COPPER ALUMINIUM / STAINLESS STEEL Nominal current 500A 800A 1150A 630A Cross sectional area 115mm 2 171mm 2 339mm 2 277mm 2 Maximum system voltage (AC) (contact Insul-8 for other voltages) (DC) (contact Insul-8 for other voltages) Resistance R (for DC) at 20 0 C (ž/m) Impedance Z (for AC) at 20 0 C (ž/m) Maximum allowable ambient temperature for 100% duty cycle 25 0 C 25 0 C 25 0 C 25 0 C Bar length 4.5m 4.5m 4.5m 4.5m Support pitch Standard 1500mm 1500mm 1500mm 1500mm Lateral 1125mm 1125mm 1125mm 1125mm Minimum pitch centres Standard 60mm 60mm 60mm 60mm Lateral 60mm 60mm 60mm 60mm Expansion sections: not required for runs less than 150m 150m 150m 150m Minimum bending radius: (horizontal only) 1.5m 1.5m 1.5m 1.5m Railway Shore Supply Electric Mining Vehicles 20 SAFELEC 3

21 CURRENT RATING 500A 800A 1150A Medium Heat (grey) Phase Earth COPPER CONDUCTOR BARS Standard Phase Standard Earth Medium Heat CURRENT RATING 500A 800A 1150A Medium Heat (grey) Phase Earth EXPANSION SECTIONS Expansion section Expansion sections are required on all systems over 150m long. The maximum gap of the expansion section is 50mm. The expansion section is 4.5m long and is installed in place of one length of conductor bar. SAFELEC 3 21

22 ALUMINIUM / STAINLESS STEEL CONDUCTOR BARS CURRENT RATING Medium Heat (grey) Phase Earth 630A Standard Phase Standard Earth Medium Heat EXPANSION SECTIONS CURRENT RATING Medium Heat (grey) Phase Earth 630A Expansion sections are required on all systems over 150m long. Expansion section The maximum gap of the expansion section is 50mm. The expansion section is 4.5m long and is installed in place of one length of conductor bar. 22 SAFELEC 3

23 JOINTS JOINT Copper (up to 800A) Copper 1150A Aluminium A Copper Joint JOINT COVER Medium Heat grey A Copper Joint Aluminium Joint JOINTING COMPOUND JOINTING COMPOUND Jointing compound should be applied to the contact surfaces of the joint and bar at every joint on copper and aluminium systems. One tube is sufficient for over 300 connections. POWERFEED POWERFEEDS: JOINT POWERFEED Standard Joint Powerfeed Medium Heat (red) Powerfeed has cable connection for maximum 2 x 50mm 2 cables. SAFELEC 3 23

24 POWERFEED SECTIONS Single cable connection Double cable connection SINGLE CABLE CONNECTION Medium Heat Phase (grey) COPPER BAR 500A Medium Heat Earth (grey) DOUBLE CABLE CONNECTION 500A 800A 1500A Powerfeed sections are 4.5m long and should be fitted in place of a length of conductor bar. Suitable for connection of 1 or 2 cables up to 50mm 2 Medium Heat Phase (grey) Medium Heat Earth (grey) ALUMINIUM / STAINLESS STEEL BAR SINGLE CABLE CONNECTION 630A Single cable connection Medium Heat Phase (grey) Medium Heat Earth (grey) DOUBLE CABLE CONNECTION 630A Double cable connection Medium Heat Phase (grey) Medium Heat Earth (grey) SAFELEC 3

25 HANGER CLAMPS: STANDARD MOUNT STANDARD (BLACK) POLYCARBONATE (RED) STAINLESS STEEL WITH ZINC PLATED HARDWARE Single pole Weight Standard hangers are acetyl. Maximum support spacing is 1.5m. Single pole hanger Stainless steel hanger HANGER CLAMPS: WITH INSULATOR Single pole Single pole Single pole Single pole Two pole (Black) (Red) Stainless steel Two part Two part Two pole two part hanger In particularly dusty or humid environments, hangers with insulator should be used. Stainless steel hanger with insulator Single pole two part hanger ANCHOR CLAMPS Standard With insulator Without top bolt (two required per anchor point) Anchor points are usually situated in the middle of a conductor system. Additional anchor points are required for systems with expansion sections. Anchor clamp Anchor clamp with insulator Anchor clamp without top bolt SAFELEC 3 25

26 END CAPS End cap End cap ISOLATION S ECTIONS COPPER BAR CURRENT RATING 500A 800A 1500A Medium Heat (grey) phase earth Isolation section Isolation sections provide electrical separation between adjacent sections of conductor bar. ALUMINIUM / STAINLESS STEEL Only for use in dry, clean conditions. The Isolation section is 4.5m long and is installed in place of one length of conductor bar. It is recommended that Isolation sections are not fitted in earth conductors. CURRENT RATING Medium Heat (grey) phase earth 630A Isolation section SAFELEC 3

27 COLLECTORS CURRENT RATING 100A 250A Phase Earth - without deflector Earth - right hand Earth - left hand A Phase Collector A Collector (Earth left) A collectors are supplied without cable. Stranded cable terminal clamps are included. 250A Collector A collectors are supplied with 2 x 1m 35mm 2 cable. COLLECTOR SHOE + HOLDER CURRENT RATING 50A + 100A Phase - red 50A + 100A Earth - green 250A Code / 100A Collector Shoe and Holder A Collector Shoe and Holder The copper graphite shoe ensures electrical continuity, a smooth contact with the conductor bar and a good resistance to wear. SAFELEC 3 27

28 COLLECTOR BRACKET 13mm SQUARE 25mm SQUARE Single Double mm square, 200mm long for use with 50A collector. Single collector bracket Double collector bracket mm square, 400mm long for use with 100A and 250A collectors. Single collector bracket Double collector bracket BRACKETS: SINGLE SIDED BRACKET to suit beam flange mm to suit beam flange mm BRACKETS: DOUBLE SIDED BRACKET to suit beam flange mm to suit beam flange mm BRACKETS: WEB BRACKET BRACKETS: GIRDER CLAMP SAFELEC 3

29 SYSTEM DIMENSIONS STANDARD HANGER CLAMPS HANGER CLAMPS WITH INSULATOR SAFELEC 3 29

30 C OMPONENT DIMENSIONS COPPER JOINT (up to 800A) (319874) 500A STANDARD PHASE COVER - Expansion Section (319207) ALUMINIUM JOINT (319873) STANDARD PHASE COVER (319850) SINGLE POLE HANGER (319821) JOINT POWERFEED (319909) STAINLESS STEEL HANGER (319826) STAINLESS STEEL HANGER CLAMP with Insulator (319827) STANDARD ANCHOR CLAMP (319832) END CAP (319892) 30 SAFELEC 3

31 V BAR SAFELEC TECHNICAL DATA For use in applications where regular disconnection and reconnection of current collectors is required: for example in mining and quarrying. The specially designed profile of the insulating guides the collector shoe onto the sliding surface of the conductor bar, providing greater tolerance and allowing the collectors to be correctly located without direct access to the bar. CONDUCTOR BAR COVER STANDARD MEDIUM HEAT Material Dielectric strength Surface resistivity Volume resistivity PVC 180 KV/cm ž >10 15 ž/cm BAYBLEND 240 KV/cm >10 14 ž >10 16 ž/cm Vicat softening temperature (never expose PVC to temperatures in excess of 80 o C) Flame-test Oxygen index Specific density 84 0 C Self extinguishing 54% 1.5 g/cm C Self extinguishing 24% 1.15 g/cm 3 CONDUCTOR BAR COPPER ALUMINIUM / STAINLESS STEEL Nominal current 500A 800A 1150A 630A Cross sectional area 115mm 2 171mm 2 339mm 2 277mm 2 Maximum system voltage (AC) (contact Insul-8 for other voltages) (DC) (contact Insul-8 for other voltages) Resistance R (for DC) at 20 0 C (ž/m) Impedance Z (for AC) at 20 0 C (ž/m) Maximum allowable ambient temperature for 100% duty cycle 25 0 C 25 0 C 25 0 C 25 0 C Bar length 6m 6m 6m 6m Support pitch Standard 1500mm 1500mm 1500mm 1500mm Lateral 1125mm 1125mm 1125mm 1125mm Minimum pitch centres Standard 70mm 70mm 70mm 70mm Lateral 70mm 70mm 70mm 70mm Expansion sections: not required for runs less than 150m 150m 150m 150m Minimum bending radius: (horizontal only) 1.5m 1.5m 1.5m 1.5m V BAR 31

32 COPPER CONDUCTOR BARS CURRENT RATING 500A 800A 1150A Standard Phase Standard Earth EXPANSION SECTIONS CURRENT RATING 500A 800A 1150A Expansion sections are required on all systems over 150m long. The maximum gap of the expansion section is 50mm. Expansion section The expansion section is 1.5m long. ISOLATION S ECTIONS Isolation sections provide electrical separation between adjacent sections of conductor bar. Only for use in dry, clean conditions. CURRENT RATING 500A 800A 1500A It is recommended that Isolation sections are not fitted in earth conductors. 32 V BAR

33 ALUMINIUM CURRENT RATING / STAINLESS STEEL CONDUCTOR 630A BARS Standard Phase Standard Earth CURRENT RATING 630A EXPANSION SECTIONS Expansion section Expansion sections are required on all systems over 150m long. The maximum gap of the expansion section is 50mm. The expansion section is 1.5m long. CURRENT RATING 630A ISOLATION S ECTIONS Isolation sections provide electrical separation between adjacent sections of conductor bar. Only for use in dry, clean conditions. It is recommended that Isolation sections are not fitted in earth conductors. V BAR 33

34 JOINTS 500/800A Copper Joint JOINT Copper 500/800A Copper 1150A JOINT COVER Standard Aluminium Standard A Copper Joint Aluminium Joint POWERFEEDS: JOINT POWERFEED POWERFEED Standard (black) HANGER CLAMPS: WITH INSULATOR Single pole two part hanger Single pole Two part In particularly dusty or humid environments, hangers with insulator should be used ANCHOR CLAMPS Heavy duty anchor clamp Heavy duty anchor END CAPS Transfer end cap V BAR

35 COLLECTORS CURRENT RATING 100A 250A Phase Earth - without deflector Earth - right hand Earth - left hand A Phase Collector A Collector (Earth left) A collectors are supplied without cable. Stranded cable terminal clamps are included. 250A Collector A collectors are supplied with 2 x 1m 35mm 2 cable. COLLECTOR SHOE + HOLDER CURRENT RATING 50A + 100A Phase - red 50A + 100A Earth - green 250A Code / 100A Collector Shoe and Holder A Collector Shoe and Holder The copper graphite shoe ensures electrical continuity, a smooth contact with the conductor bar and a good resistance to wear. V BAR 35

36 C OMPONENT DIMENSIONS 800A STANDARD PHASE COVER Expansion Section (319457) JOINT COVER Standard (319840) SINGLE POLE TWO PART HANGER (319844) ALL OTHER COMPONENT DIMENSIONS AS SAFELEC 3 36 V BAR

37 N OTES 37

38 N OTES 38

39 N OTES 39

40 Subsidiary companies P O W E R A N D D A T A T R A N S F E R HEADQUARTERS DELACHAUX S.A. 119 Avenue Louis Roche -BP Gennevilliers Cedex FRANCE Tel: +33 (0) Fax: +33 (0) delachomgt@delachaux.fr CONDUCTIX OPERATIONS 119 Avenue Louis Roche -BP Gennevilliers Cedex FRANCE Tel: +33 (0) Fax: +33 (0) conductix@delachaux.fr Countries where we are represented : AUSTRALIA CONDUCTIX Pty. Ltd. (Insul-8) Dandenong Tel: + (61) Fax: + (61) info@conductix.com.au BENELUX CONDUCTIX Benelux Brussels Tel: + (32) (0) Fax: + (32) (0) info@conductix.be CANADA CONDUCTIX Corp. (Insul-8) St Jérôme Tel: + (1) Fax: + (1) infocanada@conductix.us CHINA CONDUCTIX Ltd (Han Fa) Wuhan Tel: + (86) Fax: + (86) info@conductix.cn FRANCE CONDUCTIX (Delachaux) Belley Tel: + 33 (0) Fax: + 33 (0) infoconductix@delachaux.fr Gennevilliers Tel: + 33 (0) Fax: + 33 (0) infoconductix@delachaux.fr GERMANY / AUSTRIA CONDUCTIX GmbH Offenbach / Main Tel: + (49) Fax: + (49) info@conductix.de ITALY CONDUCTIX Srl (Comes) Milan Tel: + 39 (0) Fax: + 39 (0) info@conductix.it Turin Tel: + 39 (0) Fax: + 39 (0) info@conductix.it MEXICO CONDUCTIX S.de R.L. de C.V. (Insul-8) Monterrey Tel: + (52) Fax: + (52) infomexico@conductix.us UNITED KINGDOM CONDUCTIX Ltd (Insul-8) Salford Tel: + (44) Fax: + (44) info@conductix.co.uk UNITED STATES CONDUCTIX, Inc. (Insul-8) Omaha, NE Tel: + (1) Fax: + (1) info@conductix.us Harlan, IA Tel: + (1) Fax: + (1) info@conductix.us Algeria, Argentina, Austria, Bahrain, Bolivia, Brasil, Bulgaria, Cameroons, Chile, China, Colombia, Congo, Ivory Coast, Croatia, Czechia, Denamark, U.A.S., Ecuador, Egypt, Finland, Gabon, Greece, Guatemala, Guinea, Honduras, Hungary, Indonesia, India, Irak, Iran, Ireland, Israel, Japan, Jordania, Korea, Kuwait, Lebanon, Madagascar, Malaisia, Mali, Mauritania, Mexico, Morocco, Netherlands, New Zealand, Niger, Nigeria, Norway, Pakistan, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Rumania, Russia, Saudi Arabia, Senegal, Singapore, Slovakia, South Africa, Spain, Sweden, Switzerland, Syria, Thailand, Tunisia, Turkey, Uruguay, Venezuela, Viet-Nam...