Size & Range. for windows & doors. Company

Transcription

1 Size & Range for windows & doors A Company B

2 General information windows and doors Sizes This catalogue contains all Airlite s standard sizes for windows and doors. These are the ones that we make every day. They are performance rated and will be delivered in an advised lead time. Should you require one of our standard windows in a special size, it s not a problem. We ll work with you to ensure that the size you want maintains its rating performance, and can be delivered when you need it. Window and door combinations are available. This includes laundry units where a hinged door is combined with either an awning, casement, double hung, fixed or sliding window on one or either sides of the door. For further details consult an Airlite sales representative. Timber Due to the colour variation found naturally in timber, we cannot guarantee colour matching of timber components. Aluminium sections, including insect screens, locks, handles, winders and other hardware are finished in coffee powder coat as standard. Other colours available on request. An extensive product range is available in merbau, this hardwood timber species meets Australian Standard AS Construction of buildings in bushfire prone areas. Aluminium Available in a range of standard and custom colours. Black coloured locks, handles, winders and other hardware are fitted as standard. Other colours are available on request (not available for sliding window or door products). Composite Black coloured locks, handles, winders and other hardware are fitted as standard. Other Aluminium cover plates (flashings) and aluminium angles are not supplied as standard, but are available on request. All Airlite windows and doors shown in this size and range catalogue have been designed and glazed in accordance with relevant Australian Standards AS2047, AS1288 and AS2208 and conform to AS4055 for wind loads. Glazing bars Colonial and federation bar layouts are shown and other configurations are available on request. Insect screens Aluminium framed insect and safety screens are available in a standard range of colours to match aluminium and composite windows and doors. Cedar framed insect screens are supplied raw or pre-primed, ready for final sanding and finishing. Window and door codes All Airlite codes for windows and doors follow a consistent format. The letters explain the type of material (the first letter) and the style of the window or door (the last two letters). And the numbers specify the approximate height (the first two digits) and approximate width (the last two digits). For example a CSW1214 would be a cedar sliding window which has a frame size of 1200mm high by 1450mm wide. The handing (which sash operates) can be reversed from what is shown in this catalogue. 2

3 Codes When ordering products specify material type in front of the product codes shown in this catalogue with either: A aluminium C cedar (Western red cedar) TA composite H hardwood (Merbau) Product codes indicated are for products without additional features such as glazing bars, transom (unless indicated) or chair rail. If required insert the required variation code after the product code. C colonial glazing bar FB federation glazing bar T transom CR chair rail (cedar only) For entry and laundry units, and sliding doors additional codes are added after the product code to indicate specific product configurations. Example SR after an entry unit code indicates that the sidelite is on the right of the door (as seen from the outside). Example 3 after a sliding door code indicates that the sliding door has 3 panels. Window and door symbols Contents General information...2 Measuring windows and doors...4 Curves, rakes and geometric shapes...6 Glazing bars...7 Bay window...8 Design for windows and doors...9 Sliding window...10 Double hung window...11 Awning window...12 Casement window...13 Fixed window...14 Bi-fold window...15 Sliding patio door...16 Stacking patio door...17 Bi-fold patio door...18 Awning top hung Hinge Single hung vertical sliding Double hung vertical sliding Moving sash Door frames...19 Showrooms...20 Moving sash Moving sash Vertical section Elevation Vertical section Elevation Vertical section Elevation Casement side hung Sliding horizontal sliding Hinge Horizontal section Elevation Door frame only Door frame plus door Sliding door Hinge Hinge Sliding panel Moving sash Horizontal section Elevation Single door with sill Single door no sill Single door with sill Single door no sill Single door 3 A Company

4 Measuring windows and doors Standard Airlite frames are sized to commonly match brick opening sizes. For all window and door materials the frame is measured on where it sits in the brick opening, as displayed in the illustrations below. Reveal thickness is not included in the frame size of revealed aluminium products, but the stud opening is bigger for revealed aluminium as indicated in the size charts. All frame materials doors Head beam STUD OPENING BRICK COURSES ALUMINIUM FRAME SIZE or COMPOSITE FRAME SIZE or TIMBER FRAME SIZE 4

5 All frame materials windows Head beam ALUMINIUM FRAME SIZE or COMPOSITE FRAME SIZE or TIMBER FRAME SIZE BRICK COURSES STUD OPENING Sill plate The illustrations shown in this catalogue are based on brick veneer wall construction. Refer to the Airlite Technical Manuals for specific building-in details of each product type and material. Horizontal and vertical cross sections are provided for various house constructions such as weatherboard and double brick. Available at airlite.com.au 5

6 Curves, rakes and geometric shapes Airlite curved windows are available as full, half and quarter circles in timber, aluminium and composite. Raked windows are available with two or three parallel/perpendicular sides. With a variety of geometric shapes also available the opportunity for you to create your own unique design is almost limitless. No matter which one you choose curve, rake or geometric shape they can be used as a free standing window to create a unique visual element or to complement the building design, or they can be attached to one of our standard windows to create an arched hi-lite. As the configurations, building-in details, frame material type and the glass thickness all have an impact on the size limitations for curved, raked and shaped windows, an Airlite sales consultant will help you choose the right shape in the right size so that you can rest easy with a window that will provide you with the performance and the look you require. 6

7 Glazing bars Over 1540mm Lowlite added Lowlite No horizontal bar Indica be rep in cer and tr Lites up to 970 One vertical bar Lites over 970 Two vertical bars Colonial windows Colonial doors Up to 600mm No horizontal bar Colonial bar exceptions 601mm 1030mm One horizontal bar Double hung windows Three horizontal bars (including meeting rail) All door heights Three horizontal bars 1031mm 1540mm Two horizontal bars Fixed & sliding windows Over 1540 Three horizontal bars Up to 600mm One horizontal bar Over 600mm Two horizontal bars Doors up to 905 One vertical bar Doors over 905 Two vertical bars Federa Over 1540mm Lowlite added Lowlite No horizontal bar Indicated colonial glazing bars may be replaced by a frame member in certain sizes (i.e. meeting rails and transoms). Lites up to 970 One vertical bar Lites over 970 Two vertical bars Lowlite No horizontal bar Lites up to 970 One vertical bar Lites over 970 Two vertical bars Colonial Doors Three horizontal bars Federation windows Federation doors Up to 600mm One horizontal bar Colonial Doors Lites up to 905 One vertical bar Colonial Doors Lites over 905 Two vertical bars Federation bar exceptions All door heights Two horizontal bars Over 600mm Two horizontal bars Double hung windows Two horizontal bars (meeting rail not included) All door widths Two vertical bars Lites up to 730 One vertical bar Lites over 730 Two vertical bars 7

8 Bay window Airlite bay windows can be configured in timber, aluminium or composite, using any of our standard window sizes. Our standard bay window is configured with a front that is parallel to the house and side wings at either 135 or 90 angles. Custom angles are also available. A bay window can be constructed from many combinations of standard Airlite windows i.e. fixed panels combined with either awning, casement or double hung windows are the most popular combinations. Positioning of the operable windows will depend on your circumstances and functional requirements. For further information regarding other bay window configurations contact your Airlite sales consultant. Double hung/fixed/double hung Awning/Fixed/Awning, with lowlite Fixed/Sliding/Fixed, with lowlite 8

9 Design for windows and doors Windows and doors will not only affect the look of your home from inside and outside, but where they are placed and the style you choose will also affect the comfort of you and your family. The basic function of windows and doors is to admit daylight and ventilation in acceptable and consistent quantities, while maintaining the ambient temperature inside the house this is your overall comfort level. But this needs to be balanced against what you want to see through them and how much privacy you require. You should also consider how windows and doors need to blend with the overall style of your home, both in design and colour. From a safety and security aspect you need to have the appropriate style of window or door for each location. And finally if noise is an issue you need to understand the impact of using certain styles of windows and doors. Airlite will help you find the best solution for your home to ensure a lifetime of comfortable living for you and your family. 9

10 Sliding window standard sizes NUMBER OF BRICKS STUD OPENING REVEALED ALUMINIUM STUD OPENING OTHER MATERIALS FRAME SIZE ALL MATERIALS SW0606 SW0607 SW0608 SW0609 SW0610 SW0612 SW0614 SW0615 SW0618 SW0621 SW0624 SW0627 SW0706 SW0707 SW0708 SW0709 SW0710 SW0712 SW0714 SW0715 SW0718 SW0721 SW0724 SW0727 SW0907 SW0908 SW0909 SW0910 SW0912 SW0914 SW0915 SW0918 SW0921 SW0924 SW0927 All units are illustrated as viewed from outside. SW1008 SW1009 SW1010 SW1012 SW1014 SW1015 SW1018 SW1021 SW1024 SW1027 SW1209 SW1210 SW1212 SW1214 SW1215 SW1218 SW1221 SW1224 SW1227 SW1410 SW1412 SW1414 SW1415 SW1418 SW1421 SW1424 SW1427 SW1512 SW1514 SW1515 SW1518 SW1521 SW1524 SW SW1809T SW1810T SW1812T SW1814T SW1815T SW1818T SW1821T SW1824T SW1827T All dimensions are in mm. Two lite sliding windows are handed on the left as standard but can be ordered reversed. Ask your sales consultant. Three lite sliding window sashes are proportioned as quarter/half/quarter in width but can be ordered as equal widths. Ask your sales consultant. 2170mm wide sliding windows in composite are two lite configuration. All flyscreens are fitted externally. SW2110T SW2112T SW2114T SW2115T SW2118T SW2121T SW2124T SW2127T 10

11 Double hung window standard sizes NUMBER OF BRICKS STUD OPENING REVEALED ALUMINIUM STUD OPENING OTHER MATERIALS FRAME SIZE ALL MATERIALS DH0906 DH0907 DH0908 DH0909 DH0910 DH0912 DH0914 DH0915 DH0918 DH0921 DH0924 DH0927 DH1006 DH1206 DH1406 DH1506 DH1007 DH1207 DH1407 DH1507 DH1008 DH1208 DH1408 DH1508 DH1009 DH1209 DH1409 DH1509 DH1010 DH1210 DH1410 DH1510 DH1012 DH1212 DH1412 DH1512 DH1014 DH1214 DH1414 DH1514 DH1015 DH1215 DH1415 DH1515 DH1018 DH1218 DH1418 DH1518 DH1021 DH1221 DH1421 DH1521 DH1024 DH1224 DH1424 DH1524 DH1027 DH1227 DH1427 DH1527 All units are illustrated as viewed from outside. All dimensions are in mm. Available in cedar only is a tilt double hung, where both the top and bottom sashes are able to be tilted inwards. Replace DH with TW if a tilt double hung window is required. Two and three lite double hung windows have the option of a division bar across the fixed lite. Ask your sales consultant. Over 1800mm high double hung DH1806 DH1807 DH1808 DH1809 DH1810 DH1812 DH1814 DH1815 DH1818 DH1821 DH1824 DH windows can be configured with a lowlite. Ask your sales consultant. Three lite double hung sashes are proportioned equally in width DH2106 DH2107 DH2108 DH2109 DH2110 DH2112 DH2114 DH2115 DH2118 DH2121 DH2124 DH2127 across the frame but can be ordered as quarter/half/quarter widths. Ask your sales consultant. All flyscreens are fitted externally. 11

12 Awning window standard sizes NUMBER OF BRICKS STUD OPENING REVEALED ALUMINIUM STUD OPENING OTHER MATERIALS FRAME SIZE ALL MATERIALS AW0606 AW0607 AW0608 AW0609 AW0610 AW0612 AW0614 AW0615 AW0706 AW0707 AW0708 AW0709 AW0710 AW0712 AW0714 AW0715 AW0906 AW0907 AW0908 AW0909 AW0910 AW0912 AW0914 AW0915 AW1006 AW1007 AW1008 AW1009 AW1010 AW1012 AW1014 AW1015 AW1206 AW1207 AW1208 AW1209 AW1210 AW1212 AW1214 AW1215 AW1406 AW1407 AW1408 AW1409 AW1410 AW1412 AW1414 AW1415 AW1506 AW1507 AW1508 AW1509 AW1510 AW1512 AW1514 AW1515 AW0618 AW0621 AW0624 AW0718 AW0721 AW0724 AW0918 AW0921 AW0924 AW1018 AW1021 AW1024 AW1218 AW1221 AW1224 AW1418 AW1421 AW1424 AW1518 AW1521 AW1524 AW0627 AW0727 AW0927 AW1027 AW AW1427 AW All units are illustrated as viewed from outside. AW1806T AW1807T AW1808T AW1809T AW1810T AW1812T AW1814T AW1815T AW1818T AW1821T AW1824T AW1827T All dimensions are in mm. Three lite awning window sashes are proportioned equally in width across the frame but can be ordered as quarter/half/quarter widths. Ask your sales consultant. All flyscreens are fitted internally. AW2106T AW2107T AW2108T AW2109T AW2110T AW2112T AW2114T AW2115T AW2118T AW2121T AW2124T AW2127T 12

13 Casement window standard sizes NUMBER OF BRICKS STUD OPENING REVEALED ALUMINIUM STUD OPENING OTHER MATERIALS FRAME SIZE ALL MATERIALS CW0606 CW0706 CW0707 CW0708 CW0709 CW0710 CW0712 CW0714 CW0715 CW0906 CW0907 CW0908 CW0909 CW0910 CW0912 CW0914 CW0915 CW1006 CW0607 CW0608 CW0609 CW0610 CW0612 CW0614 CW0615 CW1007 CW1008 CW1009 CW1010 CW1012 CW1014 CW1015 CW1206 CW1207 CW1208 CW1209 CW1210 CW1212 CW1214 CW1215 CW1406 CW1407 CW1408 CW1409 CW1410 CW1412 CW1414 CW1415 CW1506 CW1507 CW1508 CW1509 CW1510 CW1512 CW1514 CW1515 CW0618 CW0621 CW0624 CW0718 CW0721 CW0724 CW0918 CW0921 CW0924 CW1018 CW1021 CW1024 CW1218 CW1221 CW1224 CW1418 CW1421 CW1424 CW1518 CW1521 CW1524 CW0627 CW0727 CW0927 CW1027 CW CW1427 CW All units are illustrated as viewed from outside. CW1806T CW1807T CW1808T CW1809T CW1810T CW1812T CW1814T CW1815T CW1818T CW1821T CW1824T CW1827T All dimensions are in mm. One and two lite casement windows are handed on the left as standard but can be ordered reversed. Ask your sales consultant. The left and right sash on a three lite casement window are handed to open out from the middle of the window but can be ordered reversed. Ask your sales consultant. Three lite casement window sashes are proportioned equally in width across the frame but can be ordered as quarter/half/quarter widths. Ask your sales consultant. Windows with a grey shaded box. CW2106T CW2107T CW2108T CW2109T CW2110T CW2112T CW2114T CW2115T CW2118T CW2121T CW2124T CW2127T 970mm wide casement windows in aluminium are two lite configuration. 1810mm wide casement windows in aluminium are three lite configuration. All flyscreens are fitted internally on winder operated casement windows. 13

14 Fixed window standard sizes NUMBER OF BRICKS STUD OPENING REVEALED ALUMINIUM STUD OPENING OTHER MATERIALS FRAME SIZE ALL MATERIALS FW0606 FW0607 FW0608 FW0609 FW0610 FW0612 FW0614 FW0615 FW0618 FW0621 FW0624 FW0627 FW0706 FW0707 FW0708 FW0709 FW0710 FW0712 FW0714 FW0715 FW0718 FW0721 FW0724 FW0727 FW0906 FW0907 FW0908 FW0909 FW0910 FW0912 FW0914 FW0915 FW0918 FW0921 FW0924 FW0927 FW1006 FW1007 FW1008 FW1009 FW1010 FW1012 FW1014 FW1015 FW1018 FW1021 FW1024 FW1027 FW1206 FW1207 FW1208 FW1209 FW1210 FW1212 FW1214 FW1215 FW1218 FW1221 FW1224 FW FW1406 FW1407 FW1408 FW1409 FW1410 FW1412 FW1414 FW1415 FW1418 FW1421 FW1424 FW1427 FW1506 FW1507 FW1508 FW1509 FW1510 FW1512 FW1514 FW1515 FW1518 FW1521 FW1524 FW1527 All units are illustrated as viewed from outside. FW1806 FW1807 FW1808 FW1809 FW1810 FW1812 FW1814 FW1815 FW1818 FW1821 FW1824 FW All dimensions are in mm. Over 1800mm high fixed windows can be configured with a lowlite. Ask your sales consultant. Three lite fixed window sashes are proportioned equally in width across the frame but can be ordered as quarter/half/quarter widths. Ask your sales consultant. FW2106 FW2107 FW2108 FW2109 FW2110 FW2112 FW2114 FW2115 FW2118 FW2121 FW2124 FW

15 Bi-fold window standard configurations 2L 3L 4L 5L 6L 7L 2R 3R 4R 5R 6R 7R 1L2R 2L2R 2L3R 3L3R 4L3R 2L1R 1L3R 3L2R 2L4R 3L4R 3L1R 4L1R 4L2R 2L5R 1L4R 5L1R 5L2R 1L5R 6L1R 1L6R Bi-fold windows are not available in composite. Timber bi-fold windows are available to Open-In or Open-Out either with or without a sill. Aluminium bi-fold windows are available to Open-In or Open-Out however sills are only available for Open-Out bi-fold windows. All bi-fold windows are custom made to measure. When ordering a bi-fold window nominate the configuration e.g. 2L2R all standard configurations are shown. 2L2R indicates that of the four panels, 2 open to the left and 2 open to the right (as seen from the outside). 15

16 Sliding patio door standard sizes Timber NUMBER OF BRICKS STUD OPENING TIMBER NUMBER OF BRICKS FRAME SIZE TIMBER STUD NUMBER OPENING OF BRICKS TIMBER FRAME STUD OPENING SIZE TIMBER TIMBER FRAME SIZE TIMBER SD2118 SD2121 SD2124 SD SD SD SD SD SD SD2118 SD2121 SD2124 SD SD SD SD SD SD All units are illustrated as viewed from outside. All dimensions are in mm. Composite Flyscreens doors for timber doors NUMBER are fitted OF BRICKS to the inside NUMBER OF BRICKS FRAME SIZE COMPOSITE STUD NUMBER OPENING OF BRICKS COMPOSITE FRAME STUD OPENING SIZE COMPOSITE COMPOSITE FRAME SIZE COMPOSITE SD2115 SD2118 SD2121 SD2124 SD SD SD SD SD SD2115 SD2118 SD2121 SD2124 SD SD SD SD SD SD2115 SD2118 SD2121 SD2124 SD SD SD SD SD All units are illustrated as viewed from outside All dimensions are in mm NUMBER OF BRICKS STUD OPENING ALUMINIUM STUD NUMBER OPENING OF BRICKS REVEALED ALUMINIUM FRAME SIZE ALUMINIUM STUD STUD OPENING OPENING ALUMINIUM REVEALED ALUMINIUM FRAME STUD OPENING SIZE ALUMINIUM ALUMINIUM FRAME SIZE ALUMINIUM All units are illustrated as viewed SD2118 SD2121 SD2124 SD SD SD SD SD SD SD2118 SD2121 SD2124 SD SD SD SD SD SD SD2118 SD2121 SD2124 SD SD SD SD SD SD SD2118 SD2121 SD2124 SD SD SD SD SD SD STUD OPENING COMPOSITE Aluminium NUMBER OF BRICKS STUD OPENING REVEALED ALUMINIUM from the outside. All dimensions are in mm. Stud opening dimensions for revealed aluminium include a reveal on the sill. 16

17 Stacking patio door * standard sizes Cedar ST2126 ST2131 ST2135 ST2151 ST2126 ST2132 ST2135 ST2153 NUMBER OF BRICKS STUD OPENING CEDAR FRAME SIZE CEDAR NUMBER OF BRICKS STUD OPENING REVEALED ALUMINIUM STUD OPENING ALUMINIUM FRAME SIZE ALUMINIUM Aluminium * Stacking patio doors are not available in hardwood or composite. All units are illustrated as viewed from outside. All dimensions are in mm. Flyscreens doors for cedar doors are fitted to the inside. All units are illustrated as viewed from the outside. All dimensions are in mm. Stud opening dimensions for revealed aluminium include a reveal on the sill. 17

18 Bi-fold patio door standard configurations 2L 3L 4L 5L 6L 7L 2R 3R 4R 5R 6R 7R 1L2R 2L2R 2L3R 3L3R 4L3R 2L1R 1L3R 3L2R 2L4R 3L4R 3L1R 4L1R 4L2R 2L5R 1L4R 5L1R 5L2R 1L5R 6L1R 1L6R Bi-fold doors are available in all materials. Timber bi-fold doors are available to Open-In or Open-Out either with or without a sill. Aluminium bi-fold doors are available to Open-In or Open-Out however sills are only available for Open-Out bi-fold doors. All bi-fold doors are custom made to measure. When ordering a bi-fold door nominate the configuration e.g. 3L3R. All standard configurations are shown. 3L3R indicates that of the six panels, 3 open to the left and 3 open to the right (as seen from the outside). 18

19 Door frames standard sizes Door frames and entry units are sized to fit a standard To calculate the required stud opening size for composite, 2040mm highx820mm wide door opening. An asterisk (*) unrevealed aluminium, cedar and hardwood add 20mm to indicates that the frame will fit an industry standard 400mm frame height and 20mm to frame width. wide sidelite. Cedar door frames with a sill are sized to suit Open-Out doors. To calculate the required stud opening size for revealed Frames with no-sill may not always suit standard brick openings aluminium add 40mm to frame height and 60mm to and should be fitted to the finished floor when using aluminium frame width. or composite frames and doors which cannot be trimmed FRAME WIDTH COMPOSITE ALUMINIUM CEDAR HARDWOOD EU2012 SL EU2012 SR FRAME HEIGHT DF2009 * EU2013 SL EU2013 SR * Frame to suit pair of 820 rebated doors DF2017 RB * * EU2017 SRL * * Frame to suit pair of 820 rebated doors * * DF2109 EU2112 SL EU2112 SR EU2113 SL EU2113 SR DF2117 RB EU2117 SRL Door Information Aluminium doors Standard height 2040mm, width 820mm, thickness 37mm Timber entry doors Standard height 2040mm, width 820mm, thickness 38mm Contempo entry doors Standard height 2040mm, width 820mm, thickness 44mm Phillip internal doors Standard height 2040mm, width 820mm, thickness 33mm See the Airlite Timber Doors catalogue for details on all sizes and styles available. No-Sill options All no-sill frames are sized with 10mm clearance beneath a standard 2040 door to allow for weather seals. Weather seals are fitted as standard to aluminium and composite Open-In doors. 19

20 Showrooms Head Office 62 Drummond Street South Windsor 2756 Phone (02) Fax (02) Branches Unit 17, 1 Central Avenue Thornleigh 2120 Phone (02) Fax (02) Suite 2, Burwood Road Burwood 2134 Phone (02) Fax (02) For further product information or advice call airlite.com.au For all product disclaimer and warranty information applicable to this catalogue and other Airlite products please visit airlite.com.au Airlite Pty Limited ABN AIRLITE 2009 All rights reserved. Disegno AIR1828_0809 A