TX2C ATS302T/RX2C ATS302R Data Sheet Version 1.02
|
|
|
- Molly Chambers
- 8 years ago
- Views:
Transcription
1 Actions Semiconductor Co., Ltd. 5-Function Remote Controller / 珠 海 炬 力 集 成 电 路 设 计 有 限 公 司 Actions Semiconductor Co., Ltd. / Data Sheet Version 1.02 Shenzhen Office: Tel: Fax: Hong Kong Office: Tel: Fax: Version: May 15, 2004
2 Actions Semiconductor Co., Ltd. 5-Function Remote Controller / Notice: The 5-function / heritages the sophisticated architecture and design methodology from TX2/RX2 of Realtek Semiconductor who is one of the leaders of remote controller technology design of toy product. This pair of / are the best Transmitter/ Receiver choice of remote control car and fully covers TX2RX2 features with superior performance. is the first receiver controller worldwide with internal and selectable DC-DC converter and shift-speed module. The /RX2C ATS302R are with more functions and excellent quality, its stability and affectivity promoted to a higher level applications. Actions keeps on leading the designing technique of remote controller of toy product. Copyright pending # X to National Intellectual Property and Patent Administration Bureau. Remark: Realtek Semiconductor is the trademark of Taiwan Realtek Semiconductor Version: May 15, 2004
3 Actions Semiconductor Co., Ltd. 5-Function Remote Controller / REMOTE CONTROLLER WITH FIVE FUNCTIONS General Description The / are a pair of CMOS LSIs designed for remote controlled car applications. is the encoder and is the decode. They provide five function keys to control forward, Backward, Rightward, Leftward and Turbo motions. Besides, a combination of these five motions can be played. And provides the selections of Output Signal Format about FORWARD function. is built with auto Power-OFF function. When input key is pulled low, will wake up, SO and SC will continuously send out the outputs used in wireless (Non-Carrier) and infrared (Carrier) applications respectively. When a complete code is sent out and all the keys are open, will automatically go into power-off mode. provides two high effective amplifiers and enhancive Signal Input (SI) recognition circuit for increasing remote control distance. has an internal, selectable DC-DC converter that makes the application stable, reliable under lower supply voltage. The input voltage ranges from 0.8v to 3.0V, where V OUT can be set to about 2.8V. Start-up is guaranteed from 1.0V inputs. Features Wide and Low operating voltage range: 1.5V to 5.0V( and No using DC-DC) 1.0V to 3.0V( Using DC-DC) 5-function remote controller controlling forward/ backward/ turbo/ right/ left Provide two transmissive interface (RF and IR) for different application Selectable Forward Output Signal Format through MOD pin Few external components needed and Oscillator with an external resistor and a capacitance. Low Standby current and low operating current. Typical oscillator frequency: RF: 8KHz IR: Hz(Carrier Frequency: 57KHz) IR: 76KHz(Carrier Frequency: 38KHz) Auto Power-OFF function for Internal, Selectable DC-DC converter which need few external components Provide two high effective amplifiers and enhancive signal input (SI) recognition circuit for very weak signal for increasing remote control distance. has very strong Driving ability about five function-output Version: May 15, 2004
4 Actions Semiconductor Co., Ltd. 5-Function Remote Controller / Pinouts and Block Diagrams (encoder) Transmitter Pin Assignment RIGHTB NC GND BACKWARDB FORWARDB TURBOB SC LEFTB NC PC SO Block Diagram TURBOB LEFTB RIGHTB FORWARDB BACKWARDB Oscillator Latch Circuit Timing Generator Encoding Circuit Logic PC SO SC (decoder) Receiver Pin Assignment Block Diagram Oscillator Timing Generator VO2 GND SI RIGHT LEFT LX VI2 VO1 VI1 TURBO FORWARD BACKWARD MOD SI VI1 VI2 AMP VO1 VO2 LX Decoding Circuit MOD DC-DC Counter PLA Latch LEFT RIGHT TURBO FORWARD BACKWARD Absolute Maximum Ratings Comments* DC Supply Voltage V to 6.0V Input/Output Voltage... GND -0.2V to + 0.2V Operating temperature C to 60 C Storage Temperature C to 5 C Never allow a stress to exceed the values listed under "Absolute Maximum Ratings", otherwise the device would suffer from a permanent damage. Nor is a stress at the listed value be allowed to persist over a period, since an extended exposure to the absolute maximum rating condition may also affect the reliability of the device, if not causing a damage thereof. Version: May 15, 2004
5 Actions Semiconductor Co., Ltd. 5-Function Remote Controller / Electrical Characteristics Typical operating Conditions : = 3.0V, Fosc =8KHz, T A =25, (unless otherwise noted.) Parameter Symbol Conditions Min Typ Max Units Input Low Voltage V il Function Input Pin V Stand by Current I StandBy No function input ua Operating Current I DD Unload ma SO Driving Current I DrSO Load=0.7V(1N48) ma SC Driving Current I DrSC Load=0.7V(1N48) ma PC Driving Current I DrPC Load=0.7V(1N48) ma Oscillator Frequency F Tolerance tolerance -20% +20% % Fosc=8KHz Code Speed S Code Fosc=8KHz Hz Note 1: Function input pin means forward, Backward, Rightward, Leftward and Turbo inputs. Typical operating Conditions : = 2.7V, Fosc = 8KHz, T A =25, NO using DC-DC converter, (unless otherwise noted.) Parameter Symbol Conditions Min Typ Max Units Function Output voltage V O Unload V Operating Current I DD Unload ma Output Driving Current I Driving Load=0.7V(1N48) ma Oscillator Frequency F Tolerance tolerance Fosc=8KHz -20% +20% % Note 1: Recommended operating voltage is 2.7V. The sensitivity of will be higher. 2: Function Output pin means forward, Backward, Rightward, Leftward and Turbo outputs. Typical operating Conditions : V INPUT =1.5V,Fosc = 8KHz, T A =25, Using DC-DC converter, (unless otherwise noted.) Parameter Symb Conditions ol Min Typ Max Units DC-DC output Voltage V DD Power Output V Fuction Output voltage V O Unload V DC-DC Hold Voltage V HOLD Unload 0.8 V Unload(Use recommended Operating Current I DD 0.8 ma DC-DC Circuit) Output Driving I Current Driving Load=0.7V(1N48) ma Oscillator Frequency F toleranc % % Tolerance e Fosc=8KHz % Note 1: Function Output pin means forward, Backward, Rightward, Leftward and Turbo outputs. 2: V INPUT means the input Voltage to the DC/DC converter. Version: May 15, 2004
6 Actions Semiconductor Co., Ltd. 5-Function Remote Controller / 3. The start-up voltage depends on the application circuit. 1.0V(Start-up) means that the Schhottky Type Diode(IN5817) must be used. Pin Description PIN NAME FUNCTION 1 RIGHTB The rightward function will be selected when this pin is connected to GND. 3 GND Negative power supply 4 BACKWARDB The backward function will be selected when this pin is connected to GND. 5 FORWARDB The forward function will be selected when this pin is connected to GND. 6 TURBOB The turbo function will be selected when this pin is connected to GND. 7 SC Output pin of the encoding signal with carrier frequency 8 SO Output pin of the encoding signal without carrier frequency(wireless) 9 Positive power supply 10 PC Power control output pin. When any function key is pulled low, PC will be high logic. If not, it will be Low logic. 11 Oscillator output pin Oscillator input pin LEFTB The leftward function will be selected when this pin is connected to GND. PIN NAME FUNCTION 1 VO2 Output pin for the Second amplify 2 GND Negative power supply 3 SI Input pin of the encoding signal 4 Oscillator input pin 5 Oscillator output pin 6 RIGHT Rightward output pin 7 LEFT Leftward output pin 8 LX DC-DC converter Switch signal output pin. The LX pin should be connected with a switch-transistor through a resistor for Limiting 9 MOD the current. Output-signal-format selection input control pin about Forward function. High=Open. When Mod pin is open, the output Signal of all the functions will be high logic if working respectively. When it is pulled low, there is the other Format that the forward output will vary from pulse format to high logic if there is corresponding input. For detailed information, Please refer to output tables 10 BACKWARD Backward output pin 11 FORWARD Forward output pin TURBO Turbo output pin Positive power supply VI1 Input pin for the First amplify 15 VO1 Output pin for the first amplify 16 VI2 Input pin for the Second amplify Version: May 15, 2004
7 Actions Semiconductor Co., Ltd. 5-Function Remote Controller / Output Tables Function Key Decode Result (Mod=1) Decode Result (Mod=0) End Code End Code Forward (L) Forward (H) Forward (Z) Forward (L) & Turbo (L) Forward (H) Forward (H) & Turbo (H) Turbo (L) Turbo (H) Forward (H) & Turbo (H) Forward (L) & Left (L) Forward (H) & Left (H) Forward (Z) & Left (H) Turbo (L) & Left (L) Forward (H) & Left (H) Forward (Z) & Left (H) Turbo (L)& Forward (L) & Left (L) Forward (H) & Left (H) Forward (Z) & Left (H) Forward (L) & Right (L) Forward (H)& Right (H) Forward (Z)& Right (H) Turbo (L) & Right (L) Forward (H)& Right (H) Forward (Z)& Right (H) Turbo (L) & Forward (L) & Right (L) Forward (H)& Right (H) Forward (Z)& Right (H) Backward (L) Backward (H) Backward (Z) Backward (L) & Right (L) Backward (H) & Right (H) Backward (Z) & Right (H) Backward (L) & Left (L) Backward (H)& Left (H) Backward (Z)& Left (H) Left (L) Left (H) Left (H) Right (L) Right (H) Right (H) Note 1:L=LOW, H=HIGH, Z= 84Hz 66.7% DUTY Pulse 2:The frequency of pulse depends on the local oscillator frequency. If the local oscillator frequency is 8KHz, the frequency of pulse will be 84Hz. 3.And the duty of pulse will not vary in any case. Version: May 15, 2004
8 Actions Semiconductor Co., Ltd. 5-Function Remote Controller / Typical Application Circuit Transmitter ( Fosc=8 KHz) Note 1:Please pay attention to the form of the oscillator circuit. The frequency in the figure below is 8KHz. The value of resistor (R1) should be changed, if the other oscillator frequency needed. And changing the value of oscillator capacitance (C1) is not necessary Oscillator Circuit R1 C1 Fosc 150K 33p About 110KHz R p About 4KHz 100K 33p About 159KHz C1 33p Fosc=8KHz 82K 33p About 190KHz 75K 33p About 200KHz Power on-off Control Handle (F, T and B) Control Handle (L and R) B F T R L RIGHT LEFT NC NC GND BACK FORW PC TURBO SC SO 9V BATTERY LED 33p V ANTENNA 27.5MHz crystal C uF 4.7uH 47uF 47p 47p 2.7uH 47p C K 47p p 10p 6.8K Version: May 15, 2004
9 Actions Semiconductor Co., Ltd. 5-Function Remote Controller / Receiver Ⅰ ( Fosc =8 KHz) Note 1: The MOD pin is open because of NO using Shift-gears 2: No using DC-DC because of higher supply voltage 3:Please pay attention to the form of the oscillator circuit. The frequency in the figure below is 8KHz. The value of resistor (R1) should be changed, if the other oscillator frequency needed. And changing the value of oscillator capacitance (C1) is not necessary Oscillator Circuit R1 C1 Fosc 150K 33p About 107KHz 4 R1 5 33p About 0KHz 100K 33p About 155KHz C1 82K 33p About 184KHz 33p Fosc=8KHz 75K 33p About 195KHz ANTENNA 68p 8p 27.5MHz C N48 10uH 15p 1.5K 2.7V 100uF uF M MOTOR A1015 A p M 1 VO2 VI2 2 GND VO1 3 SI VI1 4 5 TURBO 6 RIGHT FORW p 7 LEFT BACK 8 LX MOD Fosc=8KHz MOTOR A1015 A Power on-off 4*AA BATTERY Version: May 15, 2004
10 Actions Semiconductor Co., Ltd. 5-Function Remote Controller / Receiver Ⅱ ( Fosc =8 KHz) Note 1: The MOD pin is connected to GND because of realization of Shift-gears 2: No using DC-DC because of higher supply voltage 3: Please pay attention to the form of the oscillator circuit. The frequency in the figure below is 8KHz. The value of resistor (R1) should be changed, if the other oscillator frequency needed. And changing the value of oscillator capacitance (C1) is not necessary Oscillator Circuit 4 C1 33p R1 5 Fosc=8KHz R1 C1 Fosc 150K 33p About 107KHz 33p About 0KHz 100K 33p About 155KHz 82K 33p About 184KHz 75K 33p About 195KHz ANTENNA 68p 8p 27.5MHz C N48 10uH 15p 1.5K 2.7V 100uF uF M MOTOR A1015 A p M 1 VO2 VI2 2 GND VO1 3 SI VI1 4 5 TURBO 6 RIGHT FORW p 7 LEFT BACK 8 LX MOD Fosc=8KHz MOTOR A1015 A Power on-off 4*AA BATTERY Version: May 15, 2004
11 Actions Semiconductor Co., Ltd. 5-Function Remote Controller / Receiver Ⅲ ( Fosc =8 KHz) Note 1: The MOD pin is open because of NO using Shift-gears 2: Using DC-DC because of lower supply voltage, and the Schottky Type Diode must be used 3:Please pay attention to the form of the oscillator circuit. The frequency in the figure below is 8KHz. The value of resistor (R1) should be changed, if the other oscillator frequency needed. And changing the value of oscillator capacitance (C1) is not necessary Oscillator Circuit 4 C1 33p R1 5 Fosc=8KHz R1 C1 Fosc 150K 33p About 107KHz 33p About 0KHz 100K 33p About 155KHz 82K 33p About 184KHz 75K 33p About 195KHz ANTENNA 68p 8p 27.5MHz C MOTOR uH 15p uF K M Forward Backward p Forward 10 Backward 9 100uF + Electromagnetic Power(L&R) 2.2M VI2 VO2 VO1 GND VI1 SI TURBO FORW RIGHT BACK LEFT MOD LX Focs=8KHz IN Right Left K uH Right Left p V BATTERY Version: May 15, 2004
12 Actions Semiconductor Co., Ltd. 5-Function Remote Controller / Infrared Application Circuit Transmitter( Fosc =1 KHz) LEFTB NC Fosc=Hz PC SO 1~4.7 DC:3V 100uF Photo Diode RIGHTB NC GND BACKWAREB FORWARDB TURBOB SC Recevier( Fosc=Hz) 57KHz OUT IR Receiver 100K VI2 VO1 VI TURBO FORWARD BACKWARD MOD 100uF DC:5V GND VO2 GND SI RIGHT LEFT LX Fosc=Hz Testing Circuit NO using DC-DC / (8KHz) JUMPER 33p LEFTB NC PC SO VI2 VO1 VI1 TURBO FORWARD BACKWARD MOD 3V 100uF RIGHTB NC GND BACKWAREB FORWARDB TURBOB SC VO2 GND SI RIGHT LEFT LX p Using DC-DC / (8KHz) 33p 100uF JUMPER LEFTB NC PC SO VI2 VO1 VI TURBO FORWARD BACKWARD MOD 2.7V 100uF 5817 RIGHTB NC GND BACKWAREB FORWARDB TURBOB SC VO2 GND SI RIGHT LEFT LX K uH 1.5V 33p 103 Version: May 15, 2004
13 Actions Semiconductor Co., Ltd. 5-Function Remote Controller / Package Information DIP Pin Outline Drawing Unit in mm SOP Pin Outline Drawing Unit in mm Version: May 15, 2004
14 Actions Semiconductor Co., Ltd. 5-Function Remote Controller / DIP 16 Pin Outline Drawing Unit in mm SOP16 Pin Outline Drawing Unit in mm Version: May 15, 2004
15 Actions Semiconductor Co., Ltd. 5-Function Remote Controller / COB Bonding Figure Designation X Y RIGHTB LEFTB PC SO GND BACKWARDB FORWARDB TURBOB about 0.84mm SC SO RIGHTB GND BACKWARDB FORWARDB TURBOB SC PC LEFTB Unit in um X:840 Y:840 about 0.84mm Note: Substrate is connected to Designation X Y VO GND VI2 VO1 VI1 TURBO FORWARD BACKWARD MOD SI RIGHT about 1.18mm LEFT LX 11 4 MOD BACKWARD FORWARD TURBO VO2 GND SI RIGHT LEFT LX VI VO VI Unit in um about 1.20mm X:00 Y:1180 Note: Substrate is connected to Version: May 15, 2004
16 Actions Semiconductor Co., Ltd. 5-Function Remote Controller / Version List Version Release date Comment /4/28 First Version /9/1 (1) Modify the information of COB package (2) Modify the value of resistor that lays between the LX pin and the switch-transistor in the test and application circuit /5/15 (1)Update the product number Notice: ACTIONS's products are sold by description only, ACTIONS reserves the rights to make changes in circuit design and/or specification at any time without notice. Accordingly, the reader is cautioned to make sure the latest version of data sheets are available before placing orders. Version: May 15, 2004
TX 2C/RX 2C TOY CAR REMOTE CONTROLLER WITH FIVE FUNCTIONS
TOY CAR REMOTE CONTROLLER WITH FIVE FUNCTIONS DESCRIPTION The TX 2C/RX 2C is a pair of CMOS LSIs designed for remote controlled car applications. The TX 2C/RX 2C has five control keys for controlling the
Radiowe zdalne sterowanie
Radiowe zdalne sterowanie 2 12 Series of Decoders Features Operating voltage: 2.4V~12V Low power and high noise immunity CMOS technology Low stand-by current Capable of decoding 12 bits of information
FEATURES DESCRIPTION APPLICATIONS BLOCK DIAGRAM. PT2248 Infrared Remote Control Transmitter
Infrared Remote Control Transmitter DESCRIPTION PT2248 is an infrared remote control transmitter utilizing CMOS Technology. It is capable of 18 functions and a total of 75 commands. Single-shot and continuous
HT12D/HT12F 2 12 Series of Decoders
2 12 Series of Decoders Features Operating voltage: 2.4V~12V Low power and high noise immunity CMOS technology Low standby current Capable of decoding 12 bits of information Binary address setting Received
HT6P20X Series 2 24 OTP Encoder
2 24 OTP Encoder Features Operating voltage: 2V~12V Low power consumption Built-in oscillator needs only 5% resistor 2/4 data selectable 2 24 maximum address and data codes Easy interface with an RF or
HT6P20 2 24 OTP Encoder
2 24 OTP Encoder Features Operating voltage: 2V~12V Low power consumption Built-in oscillator needs only 5 resistor 0/2/4/8 data selectable 2 24 maximum address and data codes Easy interface with an RF
DESCRIPTION FEATURES BLOCK DIAGRAM. PT2260 Remote Control Encoder
Remote Control Encoder DESCRIPTION PT2260 is a remote control encoder paired with either PT2270 or PT2272 utilizing CMOS Technology. It encodes data and address pins into a serial coded waveform suitable
FEATURES DESCRIPTION APPLICATIONS BLOCK DIAGRAM. PT2272 Remote Control Decoder
Remote Control Decoder DESCRIPTION PT2272 is a remote control decoder paired with PT2262 utilizing CMOS Technology. It has 12-bit of tri-state address pins providing a maximum of 531,441 (or 312) address
HT12A/HT12E 2 12 Series of Encoders
2 2 Series of Encoders Features Operating voltage 2.4V~5V for the HT2A 2.4V~2V for the HT2E Low power and high noise immunity CMOS technology Low standby current: 0.A (typ. at V DD =5V HT2A with a 38kHz
HT7660. CMOS Switched-Capacitor Voltage Converter. Features. Applications. General Description. Block Diagram
CMOS Switched-Capacitor Voltage Converter Features Simple conversion of V DD to V DD Cascade connection (two devices are connected, V OUT = 2 V DD ) Boost pin for higher switching frequency Easy to use
Small 7-key User-definable Remote Control User s Guide
Small 7-key User-definable Remote Control User s Guide RMB-CM11111_Ver1.0 Table of Contents Chapter 1. Overview...1 1.1 Overview... 1 1.2 Features... 1 1.3 Applications... 1 Chapter 2. Key Description...2
HCC4541B HCF4541B PROGRAMMABLE TIMER
HCC4541B HCF4541B PROGRAMMABLE TIMER 16 STAGE BINARI COUNTER LOW SYMMETRICAL OUTPUT RESISTANCE, TYPICALLY 100 OHM AT DD = 15 OSCILLATOR FREQUENCY RANGE : DC TO 100kHz AUTO OR MASTER RESET DISABLES OSCIL-
HT9170 DTMF Receiver. Features. General Description. Selection Table
DTMF Receiver Features Operating voltage: 2.5V~5.5V Minimal external components No external filter is required Low standby current (on power down mode) General Description The HT9170 series are Dual Tone
Description. Features. Applications
Description The PT2249A / PT2250A Series are infra-red remote control receivers utilizing CMOS Technology. Remote Control System can be constructed together with the PT2248 remote control encoder. The
CA723, CA723C. Voltage Regulators Adjustable from 2V to 37V at Output Currents Up to 150mA without External Pass Transistors. Features.
CA73, CA73C Data Sheet April 1999 File Number 788. Voltage Regulators Adjustable from V to 37V at Output Currents Up to 1mA without External Pass Transistors The CA73 and CA73C are silicon monolithic integrated
Adding Heart to Your Technology
RMCM-01 Heart Rate Receiver Component Product code #: 39025074 KEY FEATURES High Filtering Unit Designed to work well on constant noise fields SMD component: To be installed as a standard component to
AP1509. 150KHz, 2A PWM BUCK DC/DC CONVERTER. Description. Pin Assignments V IN. Applications. Features. (Top View) GND GND. Output AP1509 GND GND
Description Pin Assignments The series are monolithic IC designed for a stepdown DC/DC converter, and own the ability of driving a 2A load without additional transistor. It saves board space. The external
HCF4056B BCD TO 7 SEGMENT DECODER /DRIVER WITH STROBED LATCH FUNCTION
BCD TO 7 SEGMENT DECODER /DRIVER WITH STROBED LATCH FUNCTION QUIESCENT CURRENT SPECIF. UP TO 20V OPERATION OF LIQUID CRYSTALS WITH CMOS CIRCUITS PROVIDES ULTRA LOW POWER DISPLAY. EQUIVALENT AC OUTPUT DRIVE
0.9V Boost Driver PR4403 for White LEDs in Solar Lamps
0.9 Boost Driver for White LEDs in Solar Lamps The is a single cell step-up converter for white LEDs operating from a single rechargeable cell of 1.2 supply voltage down to less than 0.9. An adjustable
Product Datasheet P1110 915 MHz RF Powerharvester Receiver
DESCRIPTION The Powercast P1110 Powerharvester receiver is an RF energy harvesting device that converts RF to DC. Housed in a compact SMD package, the P1110 receiver provides RF energy harvesting and power
DS1307ZN. 64 x 8 Serial Real-Time Clock
DS137 64 x 8 Serial Real-Time Clock www.maxim-ic.com FEATURES Real-time clock (RTC) counts seconds, minutes, hours, date of the month, month, day of the week, and year with leap-year compensation valid
VT-802 Temperature Compensated Crystal Oscillator
T-802 Temperature Compensated Crystal Oscillator T-802 Description ectron s T-802 Temperature Compensated Crystal Oscillator (TCXO) is a quartz stabilized, CMOS output, analog temperature compensated oscillator,
High-Speed, 5 V, 0.1 F CMOS RS-232 Driver/Receivers ADM202/ADM203
a FEATURES kb Transmission Rate ADM: Small (. F) Charge Pump Capacitors ADM3: No External Capacitors Required Single V Power Supply Meets EIA-3-E and V. Specifications Two Drivers and Two Receivers On-Board
HT6221/HT6222 Multi-Purpose Encoders
Multi-Purpose Encoders Features Operating voltage: 1.8V~3.5V DOUT with 38kHz carrier for R medium Low standby current Minimum transmission word: one word 55kHz ceramic resonator or crystal 16-bit address
Spread-Spectrum Crystal Multiplier DS1080L. Features
Rev 1; 3/0 Spread-Spectrum Crystal Multiplier General Description The is a low-jitter, crystal-based clock generator with an integrated phase-locked loop (PLL) to generate spread-spectrum clock outputs
HT1632C 32 8 &24 16 LED Driver
328 &216 LED Driver Features Operating voltage: 2.V~5.5V Multiple LED display 32 ROW /8 COM and 2 ROW & 16 COM Integrated display RAM select 32 ROW & 8 COM for 6 display RAM, or select 2 ROW & 16 COM for
WT7527 PC POWER SUPPLY SUPERVISOR. Data Sheet. Version 1.20. June 22, 2007
偉 詮 電 子 股 份 有 限 公 司 WT7527 PC POWER SUPPLY SUPERVISOR Data Sheet Version 1.20 June 22, 2007 The information in this document is subject to change without notice. All Rights Reserved. 新 竹 市 科 學 工 業 園 區
400KHz 60V 4A Switching Current Boost / Buck-Boost / Inverting DC/DC Converter
Features Wide 5V to 32V Input Voltage Range Positive or Negative Output Voltage Programming with a Single Feedback Pin Current Mode Control Provides Excellent Transient Response 1.25V reference adjustable
TSL250, TSL251, TLS252 LIGHT-TO-VOLTAGE OPTICAL SENSORS
TSL50, TSL5, TLS5 SOES004C AUGUST 99 REVISED NOVEMBER 995 Monolithic Silicon IC Containing Photodiode, Operational Amplifier, and Feedback Components Converts Light Intensity to Output Voltage High Irradiance
FM TRANSMITTER & RECEIVER HYBRID MODULES. FM-RTFQ SERIES FM-RRFQ SERIES. Transmitter. Receiver. Applications
FM Radio Transmitter & Receivers Available as or or 868MHz Transmit Range up to 20m Miniature Packages Data Rate up to 9.6Kbps No Adjustable Components Very Stable Operating Frequency Operates from 20
LM1084 5A Low Dropout Positive Regulators
5A Low Dropout Positive Regulators General Description The LM1084 is a series of low dropout voltage positive regulators with a maximum dropout of 1.5 at 5A of load current. It has the same pin-out as
3-to-8 line decoder, demultiplexer with address latches
Rev. 7 29 January 2016 Product data sheet 1. General description The is a high-speed Si-gate CMOS device and is pin compatible with low-power Schottky TTL (LSTTL). The is specified in compliance with JEDEC
Infrared Remote Control Receiver Module IRM-2638T
Block Diagram 1 2 3 Features High protection ability against EMI Circular lens for improved reception characteristics Line-up for various center carrier frequencies. Low voltage and low power consumption.
DS1225Y 64k Nonvolatile SRAM
DS1225Y 64k Nonvolatile SRAM www.maxim-ic.com FEATURES years minimum data retention in the absence of external power Data is automatically protected during power loss Directly replaces 2k x 8 volatile
74HCU04. 1. General description. 2. Features and benefits. 3. Ordering information. Hex unbuffered inverter
Rev. 7 8 December 2015 Product data sheet 1. General description The is a hex unbuffered inverter. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to
The 74LVC1G11 provides a single 3-input AND gate.
Rev. 8 17 September 2015 Product data sheet 1. General description The provides a single 3-input AND gate. The input can be driven from either 3.3 V or 5 V devices. This feature allows the use of this
CE8301 Series. Introduction. Features. Ordering Information. Applications SMALL PACKAGE PFM CONTROL STEP-UP DC/DC CONVERTER
SMALL PACKAGE PFM CONTROL STEP-UP DC/DC CONVERTER Introduction The is a CMOS PFM-control step-up switching DC/DC converter that mainly consists of a reference voltage source, an oscillator, and a comparator.
LC898300XA. Functions Automatic adjustment to the individual resonance frequency Automatic brake function Initial drive frequency adjustment function
Ordering number : A2053 CMOS LSI Linear Vibrator Driver IC http://onsemi.com Overview is a Linear Vibrator Driver IC for a haptics and a vibrator installed in mobile equipments. The best feature is it
Low Phase Noise XO (for HF Fund. and 3 rd O.T.) XIN XOUT N/C N/C OE CTRL N/C (0,0) Pad #9 OUTSEL
Reserved BUF BUF 62 mil Reserved Reserved FEATURES 100MHz to 200MHz Fund. or 3 rd OT Crystal. Output range: 100 200MHz (no multiplication). Available outputs: PECL, or LVDS. OESEL/OECTRL for both PECL
RX-AM4SF Receiver. Pin-out. Connections
RX-AM4SF Receiver The super-heterodyne receiver RX-AM4SF can provide a RSSI output indicating the amplitude of the received signal: this output can be used to create a field-strength meter capable to indicate
NTE2053 Integrated Circuit 8 Bit MPU Compatible A/D Converter
NTE2053 Integrated Circuit 8 Bit MPU Compatible A/D Converter Description: The NTE2053 is a CMOS 8 bit successive approximation Analog to Digital converter in a 20 Lead DIP type package which uses a differential
EMERGING DISPLAY CUSTOMER ACCEPTANCE SPECIFICATIONS 16400(LED TYPES) EXAMINED BY : FILE NO. CAS-10068 ISSUE : JAN.19,2000 TOTAL PAGE : 7 APPROVED BY:
EXAMINED BY : FILE NO. CAS-10068 APPROVED BY: EMERGING DISPLAY TECHNOLOGIES CORPORATION ISSUE : JAN.19,2000 TOTAL PAGE : 7 VERSION : 3 CUSTOMER ACCEPTANCE SPECIFICATIONS MODEL NO. : 16400(LED TYPES) FOR
EMERGING DISPLAY CUSTOMER ACCEPTANCE SPECIFICATIONS 20400 (LED TYPES) EXAMINED BY : FILE NO. CAS-10184 ISSUE : DEC.01,1999 TOTAL PAGE : 7 APPROVED BY:
EXAMINED BY : FILE NO. CAS-10184 APPROVED BY: EMERGING DISPLAY TECHNOLOGIES CORPORATION ISSUE : DEC.01,1999 TOTAL PAGE : 7 VERSION : 2 CUSTOMER ACCEPTANCE SPECIFICATIONS MODEL NO. : 20400 (LED TYPES) FOR
High-Speed, Low r ON, SPST Analog Switch (1-Bit Bus Switch)
High-Speed, Low r ON, SPST Analog Switch (1-Bit Bus Switch) DG2301 ishay Siliconix DESCRIPTION The DG2301 is a high-speed, 1-bit, low power, TTLcompatible bus switch. Using sub-micron CMOS technology,
EMERGING DISPLAY CUSTOMER ACCEPTANCE SPECIFICATIONS 16290(LED TYPES) EXAMINED BY : FILE NO. CAS-10251 ISSUE : JUL.03,2001 TOTAL PAGE : 7
EXAMINED BY : FILE NO. CAS-10251 EMERGING DISPLAY ISSUE : JUL.03,2001 APPROVED BY: TECHNOLOGIES CORPORATION TOTAL PAGE : 7 VERSION : 1 CUSTOMER ACCEPTANCE SPECIFICATIONS MODEL NO. : 16290(LED TYPES) FOR
28V, 2A Buck Constant Current Switching Regulator for White LED
28V, 2A Buck Constant Current Switching Regulator for White LED FP7102 General Description The FP7102 is a PWM control buck converter designed to provide a simple, high efficiency solution for driving
DG2302. High-Speed, Low r ON, SPST Analog Switch. Vishay Siliconix. (1-Bit Bus Switch with Level-Shifter) RoHS* COMPLIANT DESCRIPTION FEATURES
High-Speed, Low r ON, SPST Analog Switch (1-Bit Bus Switch with Level-Shifter) DG2302 DESCRIPTION The DG2302 is a high-speed, 1-bit, low power, TTLcompatible bus switch. Using sub-micron CMOS technology,
7 OUT1 8 OUT2 9 OUT3 10 OUT4 11 OUT5 12 OUT6 13 OUT7 14 OUT8 15 OUT9 16 OUT10 17 OUT11 18 OUT12 19 OUT13 20 OUT14 21 OUT15 22 OUT16 OUT17 23 OUT18
18 CHANNELS LED DRIVER GENERAL DESCRIPTION IS31FL3218 is comprised of 18 constant current channels each with independent PWM control, designed for driving LEDs. The output current of each channel can be
LM2576R. 3.0A, 52kHz, Step-Down Switching Regulator FEATURES. Applications DESCRIPTION TO-220 PKG TO-220V PKG TO-263 PKG ORDERING INFORMATION
LM2576 FEATURES 3.3, 5.0, 12, 15, and Adjustable Output ersions Adjustable ersion Output oltage Range, 1.23 to 37 +/- 4% AG10Maximum Over Line and Load Conditions Guaranteed 3.0A Output Current Wide Input
Application Note TMA Series
1W, SIP, Single & Dual Output DC/DC Converters Features SIP Package with Industry Standard Pinout Package Dimension: 19.5 x 10.2 x 6.1 mm (0.77 x 0.4 x 0.24 ) 5V&12V Models 19.5 x 10.2 x 7.1 mm (0.77 x
CD4511BM CD4511BC BCD-to-7 Segment Latch Decoder Driver
CD4511BM CD4511BC BCD-to-7 Segment Latch Decoder Driver General Description The CD4511BM CD4511BC BCD-to-seven segment latch decoder driver is constructed with complementary MOS (CMOS) enhancement mode
ICL232. +5V Powered, Dual RS-232 Transmitter/Receiver. Description. Features. Ordering Information. Applications. Functional Diagram.
ICL August V Powered, Dual RS Transmitter/Receiver Features Meets All RSC and V. Specifications Requires Only Single V Power Supply Onboard Voltage Doubler/Inverter Low Power Consumption Drivers ±V Output
Spread Spectrum Clock Generator AK8126A
Features Output Frequency Range: 22.5MHz 32MHz, 45 MHz 64MHz 90MHz 128MHz Configurable Spread Spectrum Modulation: - AKEMD s Original Spread Spectrum Profile - Modulation Ratio: Center Spread: ±0.25%,
WHITE LED STEP-UP CONVERTER. Features
General Description The is an inductor-based DC/DC converter designed to drive up to eight white LEDs in series for backlight. Only one feedback resistor is needed to control the LED current and obtain
How To Power A Power Supply On A Microprocessor (Mii) Or Microprocessor Power Supply (Miio) (Power Supply) (Microprocessor) (Miniio) Or Power Supply Power Control (Power) (Mio) Power Control
November 200 HI-010, HI-110 CMOS High oltage Display Driver GENERAL DESCRIPTION PIN CONFIGURATION (Top iew) The HI-010 & HI-110 high voltage display drivers are constructed of MOS P Channel and N Channel
1-of-4 decoder/demultiplexer
Rev. 6 1 April 2016 Product data sheet 1. General description 2. Features and benefits 3. Applications The contains two 1-of-4 decoders/demultiplexers. Each has two address inputs (na0 and na1, an active
BIPOLAR ANALOG INTEGRATED CIRCUIT
DATA SHEET BIPOLAR ANALOG INTEGRATED CIRCUIT μpc823tu SiGe:C LOW NOISE AMPLIFIER FOR GPS DESCRIPTION The μpc823tu is a silicon germanium carbon (SiGe:C) monolithic integrated circuit designed as low noise
Photo Modules for PCM Remote Control Systems
Photo Modules for PCM Remote Control Systems Available types for different carrier frequencies Type fo Type fo TSOP183 3 khz TSOP1833 33 khz TSOP1836 36 khz TSOP1837 36.7 khz TSOP1838 38 khz TSOP184 4
MH88500. Hybrid Subscriber Line Interface Circuit (SLIC) Preliminary Information. Features. Description. Applications. Ordering Information
Hybrid Subscriber Line Interface Circuit (SLIC) Features Differential to single ended conversion No transformers required Minimum installation space Off-Hook detection and LED indicator drive Relay drive
ICS379. Quad PLL with VCXO Quick Turn Clock. Description. Features. Block Diagram
Quad PLL with VCXO Quick Turn Clock Description The ICS379 QTClock TM generates up to 9 high quality, high frequency clock outputs including a reference from a low frequency pullable crystal. It is designed
INTEGRATED CIRCUITS. 74LVC08A Quad 2-input AND gate. Product specification IC24 Data Handbook. 1997 Jun 30
INTEGRATED CIRCUITS IC24 Data Handbook 1997 Jun 30 FEATURES Wide supply voltage range of 1.2 V to 3.6 V In accordance with JEDEC standard no. 8-1A Inputs accept voltages up to 5.5 V CMOS low power consumption
Features. Symbol JEDEC TO-220AB
Data Sheet June 1999 File Number 2253.2 3A, 5V,.4 Ohm, N-Channel Power MOSFET This is an N-Channel enhancement mode silicon gate power field effect transistor designed for applications such as switching
PECL and LVDS Low Phase Noise VCXO (for 65-130MHz Fund Xtal) XIN XOUT N/C N/C CTRL VCON (0,0) OESEL (Pad #25) 1 (default)
Reserved BUF BUF 62 mil OESEL^ Reserved Reserved PL520-30 FEATURES 65MHz to 130MHz Fundamental Mode Crystals. Output range (no PLL): 65MHz 130MHz (3.3V). 65MHz 105MHz (2.5V). Low Injection Power for crystal
5A LOW DROPOUT LINEAR REGULATOR General Description. Features. Applications
General Description The is a series of low dropout positive voltage regulators with a maximum dropout of.5v at 5A of load current. The series features on-chip thermal limiting which provides protection
FM/AM RADIO IC CD2003GP/GB. 1 Overview. 2 Block Diagram And Pin Descriptions
CD2003GP/GB FM/AM RADIO IC 1 Overview The CD2003GP/GB is a monolithic IC designed for use as a FM/AM radio system. Combined with audio power amplifier IC, a suitable FM/AM radio can be constituted. Its
FM TRANSMITTER & RECEIVER HYBRID MODULES. FM-RRFQ SERIES. Transmitter. Receiver. Applications
FM Radio Transmitter & Receivers Available As or or 88MHz Transmit Range Up To 0m Miniature Packages Data Rate upto 9.Kbps No Adjustable Components Very Stable Operating Frequency Operates from 0 to +8
Part Number Description Packages available
Features 3 digital I/O Serial Data output Connects directly to RF Modules Easy Enc / Dec Pairing Function Minimal External Components Required Performs all encoding/decoding of data for Reliable Operation.
BIPOLAR ANALOG INTEGRATED CIRCUIT
DATA SHEET BIPOLAR ANALOG INTEGRATED CIRCUIT μpc8tk SiGe:C LOW NOISE AMPLIFIER FOR GPS/MOBILE COMMUNICATIONS DESCRIPTION The μpc8tk is a silicon germanium carbon (SiGe:C) monolithic integrated circuit
CD4013BC Dual D-Type Flip-Flop
CD4013BC Dual D-Type Flip-Flop General Description The CD4013B dual D-type flip-flop is a monolithic complementary MOS (CMOS) integrated circuit constructed with N- and P-channel enhancement mode transistors.
Obsolete Product(s) - Obsolete Product(s)
SYNCHRONOUS PROGRAMMABLE 4-BIT BINARY COUNTER WITH ASYNCHRONOUS CLEAR INTERNAL LOOK-AHEAD FOR FAST COUNTING CARRY OUTPUT FOR CASCADING SYNCHRONOUSLY PROGRAMMABLE LOW-POWER TTL COMPATIBILITY STANDARDIZED
Absolute maximum. User Manual
RTX-MID-3V/ is an RF digital data transceiver working on the ISM free-license band of 433.92 MHz, in half-duplex way, ASK modulated and fast switch time TX RX and RX TX. It s ideal for low cost solutions,
3-input EXCLUSIVE-OR gate. The 74LVC1G386 provides a 3-input EXCLUSIVE-OR function.
Rev. 02 3 September 2007 Product data sheet 1. General description The provides a 3-input EXCLUSIVE-OR function. The input can be driven from either 3.3 or 5 V devices. This feature allows the use of these
HCC/HCF4032B HCC/HCF4038B
HCC/HCF4032B HCC/HCF4038B TRIPLE SERIAL ADDERS INERT INPUTS ON ALL ADDERS FOR SUM COMPLEMENTING APPLICATIONS FULLY STATIC OPERATION...DC TO 10MHz (typ.) @ DD = 10 BUFFERED INPUTS AND OUTPUTS SINGLE-PHASE
Datasheet - DS0002 Indice Semiconductor Pty Ltd
Datasheet - DS0002 Indice Semiconductor Pty Ltd MR16 LED Driver IC INDICE0002 with Power and Active Temperature Management KEY FEATURES Input voltage range: 12 V DC / 12 V AC. Input frequency range from
TRIPLE PLL FIELD PROG. SPREAD SPECTRUM CLOCK SYNTHESIZER. Features
DATASHEET ICS280 Description The ICS280 field programmable spread spectrum clock synthesizer generates up to four high-quality, high-frequency clock outputs including multiple reference clocks from a low-frequency
TSL213 64 1 INTEGRATED OPTO SENSOR
TSL 64 INTEGRATED OPTO SENSOR SOES009A D4059, NOVEMBER 99 REVISED AUGUST 99 Contains 64-Bit Static Shift Register Contains Analog Buffer With Sample and Hold for Analog Output Over Full Clock Period Single-Supply
DS1621 Digital Thermometer and Thermostat
Digital Thermometer and Thermostat www.dalsemi.com FEATURES Temperature measurements require no external components Measures temperatures from 55 C to +125 C in 0.5 C increments. Fahrenheit equivalent
HCF4028B BCD TO DECIMAL DECODER
BCD TO DECIMAL DECODER BCD TO DECIMAL DECODING OR BINARY TO OCTAL DECODING HIGH DECODED OUTPUT DRIVE CAPABILITY "POSITIVE LOGIC" INPUTS AND OUTPUTS: DECODED OUTPUTS GO HIGH ON SELECTION MEDIUM SPEED OPERATION
Quad 2-input NAND Schmitt trigger
Rev. 9 15 December 2015 Product data sheet 1. General description 2. Features and benefits 3. Applications The is a quad two-input NAND gate. Each input has a Schmitt trigger circuit. The gate switches
74HC377; 74HCT377. 1. General description. 2. Features and benefits. 3. Ordering information
Rev. 4 24 February 2016 Product data sheet 1. General description 2. Features and benefits 3. Ordering information The is an octal positive-edge triggered D-type flip-flop. The device features clock (CP)
LM138 LM338 5-Amp Adjustable Regulators
LM138 LM338 5-Amp Adjustable Regulators General Description The LM138 series of adjustable 3-terminal positive voltage regulators is capable of supplying in excess of 5A over a 1 2V to 32V output range
AS2815. 1.5A Low Dropout Voltage Regulator Adjustable & Fixed Output, Fast Response
1.5A Low Dropout oltage Regulator Adjustable & Fixed Output, Fast Response FEATURES Adjustable Output Down To 1.2 Fixed Output oltages 1.5, 2.5, 3.3, 5.0 Output Current of 1.5A Low Dropout oltage 1.1 Typ.
Preamplifier Circuit for IR Remote Control
Preamplifier Circuit for IR Remote Control 22906 FEATURES Carrier-out-function: carrier frequency and burst length accurately correspond to the input signal AC coupled response from 20 khz to 60 khz; all
DM9368 7-Segment Decoder/Driver/Latch with Constant Current Source Outputs
DM9368 7-Segment Decoder/Driver/Latch with Constant Current Source Outputs General Description The DM9368 is a 7-segment decoder driver incorporating input latches and constant current output circuits
HCF4010B HEX BUFFER/CONVERTER (NON INVERTING)
HEX BUFFER/CONVERTER (NON INVERTING) PROPAGATION DELAY TIME: t PD = 50ns (Typ.) at V DD = 10V C L = 50pF HIGH TO LOW LEVEL LOGIC CONVERSION MULTIPLEXER: 1 TO 6 OR 6 TO 1 HIGH "SINK" AND "SOURCE" CURRENT
ADJUSTABLE VOLTAGE AND CURRENT REGULATOR
L200 ADJUSTABLE VOLTAGE AND CURRENT REGULATOR ADJUSTABLE OUTPUT CURRENT UP TO 2 A (GUARANTEED UP TO Tj = 150 C) ADJUSTABLE OUTPUT VOLTAGE DOWN TO 2.85 V INPUT OVERVOLTAGE PROTECTION (UP TO 60 V, 10 ms)
KA7500C. SMPS Controller. Features. Description. Internal Block Diagram. www.fairchildsemi.com
SMPS Controller www.fairchildsemi.com Features Internal Regulator Provides a Stable 5V Reference Supply Trimmed to ±1% Accuracy. Uncommitted Output TR for 200mA Sink or Source Current Output Control for
LM79XX Series 3-Terminal Negative Regulators
LM79XX Series 3-Terminal Negative Regulators General Description The LM79XX series of 3-terminal regulators is available with fixed output voltages of b5v b8v b12v and b15v These devices need only one
HCF4001B QUAD 2-INPUT NOR GATE
QUAD 2-INPUT NOR GATE PROPAGATION DELAY TIME: t PD = 50ns (TYP.) at V DD = 10V C L = 50pF BUFFERED INPUTS AND OUTPUTS STANDARDIZED SYMMETRICAL OUTPUT CHARACTERISTICS QUIESCENT CURRENT SPECIFIED UP TO 20V
DS1220Y 16k Nonvolatile SRAM
Not Recommended for New Design DS122Y 16k Nonvolatile SRAM www.maxim-ic.com FEATURES years minimum data retention in the absence of external power Data is automatically protected during power loss Directly
AP1506. 150KHz, 3A PWM BUCK DC/DC CONVERTER. Pin Assignments. Description. Features. Applications. ( Top View ) 5 SD 4 FB 3 Gnd 2 Output 1 V IN
Description Pin Assignments The series are monolithic IC designed for a stepdown DC/DC converter, and own the ability of driving a 3A load without external transistor. Due to reducing the number of external
SPI-8001TW. Switching Regulators. Dual 1.5 A, DC/DC Step-Down Converter. SANKEN ELECTRIC CO., LTD. http://www.sanken-ele.co.jp/en/
Data Sheet 27469.301.1 Designed to meet high-current requirements at high efficiency in industrial and consumer applications; embedded core, memory, or logic supplies; TVs, VCRs, and office equipment,
Agilent AEDB-9140 Series Three Channel Optical Incremental Encoder Modules with Codewheel, 100 CPR to 500 CPR Data Sheet
Agilent AEDB-9140 Series Three Channel Optical Incremental Encoder Modules with Codewheel, 100 CPR to 500 CPR Data Sheet Description The AEDB-9140 series are three channel optical incremental encoder modules
LM117 LM317A LM317 3-Terminal Adjustable Regulator
LM117 LM317A LM317 3-Terminal Adjustable Regulator General Description The LM117 series of adjustable 3-terminal positive voltage regulators is capable of supplying in excess of 1 5A over a 1 2V to 37V
V CC TOP VIEW. f SSO = 20MHz to 134MHz (DITHERED)
19-013; Rev 1; 10/11 0MHz to 13MHz Spread-Spectrum General Description The is a spread-spectrum clock modulator IC that reduces EMI in high clock-frequency-based, digital electronic equipment. Using an
FAN7680. PC Power Supply Outputs Monitoring IC. Features. Description. Typical Application. www.fairchildsemi.com FPO OVP UVP PGO PSON
PC Power Supply Outputs Monitoring IC www.fairchildsemi.com Features PC Power Supply Output Monitor Circuitry Few External Components Over Voltage Protection for.v, V and V(Vcc) Outputs Under Voltage Protection
ULC Technology: High-performance gate array package using multiple metal layer CMOS technology featuring sub-micron channel lengths (0.
SIR Endec for IrDA Applications Integrated Interface Circuits TOIM ULC Technology: High-performance gate array package using multiple metal layer CMOS technology featuring sub-micron channel lengths (0.
HEF4021B. 1. General description. 2. Features and benefits. 3. Ordering information. 8-bit static shift register
Rev. 10 21 March 2016 Product data sheet 1. General description 2. Features and benefits 3. Ordering information The is an (parallel-to-serial converter) with a synchronous serial data input (DS), a clock
Tone Ringer SL2410 LOGIC DIAGRAM PIN ASSIGNMENT SLS
Tone Ringer The SL2410 is a bipolar integrated circuit designed for telephone bell replacement. Designed for Telephone Bell Replacement Low Curent Drain Adjustable 2-frequency Tone Adjustable Warbling
GP2Y0D810Z0F. Distance Measuring Sensor Unit Digital output (100 mm) type GP2Y0D810Z0F
GP2Y0D810Z0F Distance Measuring Sensor Unit Digital output (100 mm) type Description GP2Y0D810Z0F is distance measuring sensor unit, composed of an integrated combination of PD (photo diode), IRED (infrared