Lithium-ion Rechargeable Battery

Transcription

1 L - o n L-on Secondary Battery Lthum-on Rechargeable Battery LITHIUM-ION RECHARGEABLE BATTERY Notes for Desgners Select the correct type of battery to match the operatng condtons such as load current, etc. The nformaton n ths secton s for lthum-on cells only. Maxell offers these cells (excludng CLB) n battery pack format only. These nclude electronc crcuts to prevent overcharge, overdscharge and so on. These battery packs are custom-developed and produced accordng to specal requrements regardng operatng condtons and specfcatons. As a result, a mnmum number of unts may apply to such customzed orders from customers purchasng battery packs. For detals, consult your nearest Maxell dealer or dstrbutor. Charge condtons To get the most out of lthum-on batteres and use them safely, please read the followng requrements carefully: Charge mode Charge voltage Max. charge current Charge temperature Charge control flowchart (sample) Refer to the followng flowchart when desgnng constant current and constant voltage battery chargers. Start charge Check battery connecton Check battery temperature Check battery voltage Passed Constant current, constant voltage charge Current montorng Temperature montorng Tme montorng Passed Charge completon Constant current, constant voltage charge (CCCV) 4.20±0.05V / cell, 4.35±0.05V / cell 1I ta 0 to +45 deg. C Faled Prelmnary charge Faled Abnormal charge stop Safety Instructons Improper use of the battery may cause heat, fre, exploson, damage or reduced battery capacty. Please read and follow the handlng nstructons for the battery before and durng usage. The followngs are general cautons and gudelnes only and as such may not nclude every possble usage scenaro. The manufacturer wll not be lable for actons taken or accdents caused. Danger Do not dp or wet the battery n water, seawater, or other lqud. Otherwse the battery may be shorted, whch may generate heat or cause damage. Do not put the battery nto a fre. Otherwse, the electrolyte may burn or cause an exploson. Do not heat the battery. Otherwse the electrolyte may bol and resn parts may melt, causng leakage, exploson or fre. The battery has a predetermned polarty. If the battery wll not connect well to the charger or equpment, do not try to connect the battery forcefully. Check the polarty frst. If the battery s connected n reverse, t wll be charged n reverse and may cause leakage, heat generaton, exploson or fre due to an abnormal chemcal reacton. Do not connect the battery n reverse relaton to the postve (+) and negatve ( ) termnals n the charger or equpment. If the battery s connected n reverse, t wll be charged n reverse, dscharge excessve current and may cause heat generaton, exploson or fre due to an abnormal chemcal reacton. Do not let the battery termnals (+ and ) come nto contact wth a wre or any metal (lke a metal necklace or a harpn) wth whch t s carred or stored. In such a case, the battery wll be shorted and dscharge excessve current, whch may result n heat generaton, exploson or fre. Do not apply any heavy mpact to the battery, throw or drop t. Otherwse the battery may be shorted and result n heat generaton, exploson or fre. 3

2 LITHIUM-ION RECHARGEABLE BATTERY Do not drve a nal nto, hammer or stamp on the battery. Otherwse the battery may be shorted and result n heat generaton, exploson or fre. Do not solder the battery drectly. Heat appled durng solderng may melt resn parts such as separator or gasket, and result n leakage, heat generaton, exploson or fre. Do not dsassemble or alter the battery. Otherwse the battery may be shorted and result n heat generaton or fre. Do not use or leave the battery near fre, heaters, nsde an automoble n hot weather or under strong sunshne. Such condtons of hgh temperature may damage the separator, and the battery may be shorted and result n heat generaton, exploson or fre. When chargng the battery, do not use any battery charger not specfed by the manufacturer. Always follow the charge condtons specfed by the manufacturer. If the battery s charged under other condtons (a hgh temperature, a hgh voltage/current or an altered charger) not specfed by the manufacturer, the battery may cause heat generaton, exploson or fre due to abnormal chemcal reactons. Do not connect the battery drectly to an electrc outlet or cgarette lghter socket n a car. Applyng a hgh voltage may generate an excessve current and cause an electrc shock. In such a case, the battery may leak electrolyte, overheat, explode or cause fre. Warnngs Do not put the battery n a mcrowave oven or a pressure cooker. Sudden heat may damage the seal of the battery and may cause heat generaton, exploson or fre. Do not use the battery together wth a prmary battery such as a dry battery or other battery of a dfferent capacty, type and/or brand. In such a case, over-dscharge durng use or over-charge durng chargng may occur and abnormal chemcal reactons may cause heat generaton, exploson or fre from the battery. Cauton If the battery leaks and ts electrolyte comes nto contact wth skn or clothes, wash the contact area well wth tap water or other clean water rght away. Otherwse skn may break out n a rash. When the battery s expected not to be used for a long tme, take the battery out of the equpment or devce and store t n a less humd area. After long perods of storage wthout beng used, the battery should be charged before t s used. Charge the battery every 6 months to the level specfed by the manufacturer, even f the battery s not used. Do not leave the battery pack connected to the charger. It may cause the degradaton of battery performance, such as a shortenng of battery lfe. Turn off your equpment or devce power swtch after use. Do not use the battery n other than the followng temperature ranges: Charge Dscharge Storage (less than 30 days) Storage (less than 90 days) Notes for treatng used batteres 0 deg. C to +45 deg. C -20 deg. C to +60 deg. C -20 deg. C to +50 deg. C -20 deg. C to +35 deg. C Insulate (+) and ( ) termnals wth tape. Do not remove coatng. Do not expose to ran or water. Do not dsassemble. Do not leave under strong sunshne. Store n rugged receptacle and cover wth a ld. L - o n If you notce any unusual odor, heat, dscoloraton, deformaton or any other characterstc apart from what you are used to whle usng, chargng or storng the battery, then take t out of the equpment or charger, and avod usng t. Usng t n such state may result n heat generaton, exploson or fre. If the battery leaks or emts an unusual odor, remove t from the vcnty of any fre mmedately. The electrolyte may catch fre, whch may cause heat generaton or exploson. Do not let leaked electrolyte come nto contact wth the eyes. In the event of such contact, flush the eyes wth plenty of water mmedately and consult a doctor. Otherwse prolonged contact may cause serous njury. 4

3 L-on Secondary Battery Lamnated Lthum-on Rechargeable Battery L - o n Features Thn battery wth large capacty Realzaton of a thn, large-capacty lthum-on rechargeable battery wth an alumnum lamnated sheet. Excellent heat transfer characterstcs enable stable electrcal performance and hgh-rate dscharge. Cell Structure (+) ( ) Safety and relablty Maxell offers a thermally stable postve electrode composton drawng on ts lthum-on battery desgnng technque and thermally resstant separators wth elmnated thermal contractlty to enable excellent safety and relablty. Alumnum lamnated sheet Applcatons Electrc bkes Floor cleaners AGV (automated guded vehcle) UPS backup system, etc. Separators Negatve electrode Postve electrode Products Model Dameter Dmensons* (mm) Wdth Heght Weght* 3 (g) Charge Max. voltage (V) (CCCV) Max. current (A) Dscharge End voltage (V) (CC) Max. current* 4 (A) Nomnal voltage (V) Mnmum capacty* 5 (Ah) *1 Dmensons of fresh cell *2 Measured wthout termnals *3 Approxmate values *4 Please contact Maxell for condtons of use when usng as assembled battery. *5 Measured under the followng condtons: Charge CCCV: 1I ta/4.2v/2.5h, Dscharge CC: 0.2I ta/e.v. = 2.5V, Temperature: 25 deg. C Characterstcs (L13A0N2C1) Charge characterstcs Charge capacty (%) Charge current (A) Cell voltage Charge current Tme (mn) Dscharge load characterstcs Cell voltage (V) ItA 2.6A 1ItA 13A 2ItA 26A Charge capacty Charge: 13A (1I A)/4.2V (CCCV) 25 3ItA 39A 3.0 Charge: 13A 1ItA /4.2V CCCV /2h 0.2ItA, 1ItA, 2ItA, 3ItA E.V. = 2.5V Capacty (Ah) Cell voltage (V) Dscharge temperature characterstcs Cycle lfe characterstcs Capacty (Ah) Charge: 26A 2ItA /4.2V CCCV /0.65A cut Dscharge: 26A 2ItA E.V. = 2.5V Temperature: 25 deg. C Cycle number (cycle) Characterstcs lsted n ths catalog are standard measured examples. Maxell does not guarantee these data. Specfcatons are subject to change wthout notce. Ths data s for lthum-on cells only. Maxell offers these cells n battery pack format only. These nclude electronc crcuts to prevent overcharge, over dscharge and so on. These battery packs are custom-developed and produced accordng to specal requrements regardng operatng condtons and specfcatons. As a result, a mnmum number of unts may apply to such customzed orders from customers purchasng battery packs. Cell voltage (V) A 1ItA /4.2V CCCV /2h/25 13A 1ItA E.V. = 2.5V Capacty (Ah) 7

4 Dangerous Goods Transportaton Regulatons for Lthum Cells and Batteres Some transportaton regulatons have been recently revsed and wll come nto effect after Jan. 1, Revsed UN recommendatons requre cells and batteres to be manufactured under a qualty management program. Ths requrement has been ncorporated nto the IMDG Code and ICAO TI/IATA DRG. Maxell factores have been certfed for ISO 9001 and therefore meet ths requrement. 1) Transportaton except by ar: Actual operaton s the same as before. (see ref.) 2) Ar transportaton: Former packng nstructons 965 and 968 have been dvded nto Secton I (class 9 dangerous goods) and Secton II (exempt from class 9 dangerous goods). The revsed packng nstructons consst of Secton IA, Secton IB and Secton II. Secton IA (class 9 dangerous goods) s almost the same as the former Secton I. Former Secton II s dvded nto Secton IB (class 9 dangerous goods) and Secton II (exempt from class 9 dangerous goods). The new Secton IB covers tems that were formerly exempted from regulaton but whch must be shpped as class 9 dangerous goods from A summary s shown n the followng table. Please use updated IATA regulatons (54th edton and later) to confrm detals. Lthum Metal Content Package Lmts Techncal Instructons for lthum metal batteres (PI 968) Secton Secton II Secton IB Secton IA Quantty Cell: 0.3 g Battery: 0.3 g Weght 2.5 kg net weght Cell: 1.0 g Battery: 2.0 g 2 batteres or 8 cells Cell: 1.0 g Battery: 2.0 g > 2 batteres or > 8 cells 2.5 kg gross weght Passenger and cargo arcraft Classfcaton Exempted Class 9 Cell: > 1.0 g Battery: > 2.0 g 2.5 kg net weght (Pass.) 35 kg net weght (Cargo) Packagng 1.2 M drop test UN performance packagng Labels Documents Note 1) Note 2) Note 3) Invoce (Ar Waybll) Addtonal document Ar Waybll Addtonal document Tranng Adequate nstructons DG tranng Declaraton for DG Ar Waybll Note 1): Handlng label Note 2): Class 9 hazardous label Note 3): Cargo arcraft only label 1) For USA: Label s requred for Secton IB or Secton IA. 2) Not for USA: Label s requred for Secton IA and over 2.5 kg of packng weght. Techncal Instructons for lthum on batteres (PI965) Secton Secton II Secton IB Secton IA Watt Hour Ratng Package Lmts Quantty Cell: 2.7 Wh Battery: 2.7 Wh Weght 2.5 kg net weght Cell: 20 Wh Battery: 100 Wh 2 batteres or 8 cells Cell: 20 Wh Battery: 100 Wh > 2 batteres or > 8 cells 10 kg gross weght Passenger and cargo arcraft Classfcaton Exempted Class 9 Cell: > 20 Wh Battery: > 100 Wh 5 kg net weght (Pass.) 35 kg net weght (Cargo) Packagng 1.2 M drop test UN performance packagng Labels Documents Invoce (Ar Waybll) Addtonal document Ar Waybll Addtonal document Tranng Adequate nstructons DG tranng Note 4): Cargo arcraft only label: Label s requred for Secton IA and over 2.5 kg of packng weght. Declaraton for DG Ar Waybll Note 4) 50

5 (Ref.) Except ar transportaton, the necessary requrements to transport lthum metal batteres or lthum on batteres as exempted from class 9 dangerous goods (non-restrcted goods) are as follows; 1. The mnmum requrements to transport lthum metal batteres; 1) For a lthum metal or a lthum alloy cell, the lthum content must not be more than 1 g. For a lthum metal or lthum alloy battery, the aggregate lthum content must not be more than 2 g. 2) Each cell or battery must be of the type proven to meet the requrement of each test n the UN Manual of Tests and Crtera, 5th revsed edton, Part III, sub-secton ) A battery handlng label must be dsplayed on each package. A telephone number must be prnted on the label for addtonal nformaton. 4) Each consgnment must be accompaned by a document for transport wth an ndcaton that: the package contans lthum metal cells or batteres; the package must be handled wth care and that a flammablty hazard exsts f the package s damaged; specal procedure should be followed n the event that the package s damaged, to nclude nspecton and repackagng f necessary; and a telephone number for addtonal nformaton. 5) Each package must be capable of wthstandng a 1.2 m drop test. 2. The mnmum requrements to transport lthum on batteres; 1) For lthum on cells, the Watt-hour ratng s not more than 20 Wh. For lthum on batteres, the Watt-hour ratng s not more than 100 Wh. The Watt-hour ratng must be marked on the outsde of the battery case except for batteres manufactured before January 1, ) Each cell or battery s of the type proven to meet the requrement of each test n the UN Manual of Tests and Crtera, 5th revsed edton, Part III, sub-secton ) A battery handlng label must be dsplayed on each package. A telephone number must be prnted on the label for addtonal nformaton. 4) Each consgnment must be accompaned by a document for transport wth an ndcaton that: the package contans lthum on cells or batteres; the package must be handled wth care and that a flammablty hazard exsts f the package s damaged; specal procedure should be followed n the event the package s damaged, to nclude nspecton and repackagng f necessary; and a telephone number for addtonal nformaton. 5) Each package must be capable of wthstandng a 1.2 m drop test. Maxell wll provde certfcates for 1) and 2) as the need arses. Documentaton for 3) and 4) needs to be prepared by the customer. If our package s used for transport, Maxell wll provde the certfcate for 5) as the need arses. However, f the customer's package s used, the customer must confrm the package can wthstand a 1.2 m drop test. Furthermore, even f our package s used for transport, the telephone number prnted on the label must be changed to that of the sender (customer). 51

6 Certfed Management Systems (Japan) ISO The Maxell group has been certfed for the ISO14001 Envronmental Management System and has made efforts to reduce envronmental mpacts throughout the product lfecycle. ISO14001 Htach Maxell, Ltd. Certfcate No.: EC97J1148 Regstraton Date: December 24, 1997 Recertfcaton Date: December 15, 2011 Certfcate Expry: December 14, 2014 Scope of Regstraton: Development, desgn, manufacture, sales and related servces of nformaton meda, batteres, parts, devces and electronc applances ISO9001 JQA-0986 ISO9001 HITACHI MAXELL, LTD. ENERGY DIVISION MICRO BATTERY DEPARTMENT Certfcate Number: JQA-0986 Regstraton Date: September 29, 1995 Last Renewal Date: December 19, 2012 Expry Date: December 18, 2015 Scope of Regstraton: The desgn/development and the manufacture of cylndrcal alkalne battery, slver oxde battery, alkalne button battery, manganese doxde lthum battery (con type and cylndrcal type), thonyl chlorde lthum battery, manganese doxde lthum rechargeable battery, ttanum carbon lthum rechargeable battery and con type lthum rechargeable battery. JQA-3029 ISO9001 HITACHI MAXELL, LTD. ENERGY DIVISION LITHIUM ION BATTERY DEPARTMENT Certfcate Number: JQA-3029 Regstraton Date: January 29, 1999 Last Renewal Date: December 27, 2011 Expry Date: December 26, 2014 Scope of Regstraton: The desgn/development and manufacture of lthum-on rechargeable battery. The desgn/development and manufacture (outsources) of lthum-on rechargeable battery. ISO/TS JQA-AU0078 ISO/TS16949 HITACHI MAXELL, LTD. ENERGY DIVISION MICRO BATTERY DEPARTMENT ONO WORKS Certfcate Number: JQA-AU0078 Regstraton Date: January 7, 2005 Last Renewal Date: January 7, 2011 Expry Date: January 6, 2014 Remote Supportng Functons: MAXELL EUROPE LTD. MAXELL CORPORATION OF AMERICA Scope of Regstraton: The desgn/development and manufacture of manganese doxde lthum batteres (con type) for automoble use. 52