For information only Not all programs are provided by HSAS TRAINING PROGRAM DURATION STATUS SOURCE TARGET OUTCOME ASBESTOS

Transcription

1 ASBESTOS Remove Non-Friable Asbestos (CPCCDE3014A) Mandatory nationally accredited training for NSW asbestos licensing purposes, with WorkCover approval Non-friable asbestos workers & wallet size card issued by Remove Friable Asbestos (CPCCDE3015A) Mandatory nationally accredited training for NSW asbestos licensing purposes, with WorkCover approval Friable asbestos workers & wallet size card issued by Supervise Asbestos Removal (CPCCBC4051A) + workplace assessment Mandatory nationally accredited training for NSW asbestos licensing purposes, with WorkCover approval Asbestos removal supervisors & wallet size card issued by Conduct Asbestos Assessment Associated With Removal (CPCCBC5014A) Mandatory nationally accredited training for NSW asbestos licensing purposes, with WorkCover approval Asbestos assessors & wallet size card issued by DEMOLITION Demolition Supervision Restricted (TAFE) Unrestricted (TAFE) Fast-tracked 5 days 3 days Mandatory training for NSW licensing purposes Pending Changes End 2015, approved by WorkCover NSW Demolition supervisors to obtain state license from WorkCover NSW TAFE NSW. T r a i n i n g M a t r i x, V 10, D e c e m b e r Page 1

2 EMERGENCY RESPONSE Identify, Prevent & Report Potential Workplace Emergencies (PUAWER001B) 2 3 hours Training required under state Targeting all workers (from Cert III WHS) Respond to Workplace Emergencies (PUAWER004B) 5-6 hours Training required under state For workplace ERTs (from Cert III in WHS) Ensure workplace emergency prevention procedures, systems & processes are implemented (PUAWER002B) Training required under state For site EPC, ECO & EC (from Cert IV in WHS) Manage and monitor workplace procedures, equipment & other resources (PUAWER003B) Training required under state Targeting site-project management (from Diploma of WHS) Confine Small Workplace Emergencies (PUAWER008B) Extinguisher Training 2 3 hours Training required under state Targeting all workers. T r a i n i n g M a t r i x, V 10, D e c e m b e r Page 2

3 GENERAL SAFETY Work Safely in the Construction Industry White Card (CPCCOHS1001A) 6 hrs Mandatory Nationally accredited course WorkCover approved All staff/contractors, prior to work on construction site WorkCover NSW national white card WHS Risk Management/SWMS Workshop (BSBWHS303A) 4 hrs x2 units from Cert. III in WHS Team leaders, leading hands, contractors, etc WHS Legislation Workshop (BSBWHS302A) 4 hrs unit from Cert. III in WHS Team leaders, leading hands, contractors, etc Provide First Aid (HLTFAID003) 1- Mandatory training, nationally accredited unit (requires annual refresher) Nominated first aiders as required by state (expiry 3 yrs) Provide CPR (HLTAID001) (annual refresher required) 3-4 hrs Mandatory training, nationally accredited unit Nominated rescue & first response workers a) HSR Initial Training b) HSR Refresher Training a) 5 days b) Mandatory training, WorkCover approved programs WorkCover NSW approved trainer or a) Nominated HSRs b) HSRs previously trained in HSR 5 day program/equipment Statement of Training (WorkCover NSW approved) Dangerous Goods & Hazardous Substances (TLID2003A) 4-5 hrs Training required under (customised to suit company/site) All staff/contractors working with &/or storing hazardous substances on site. T r a i n i n g M a t r i x, V 10, D e c e m b e r Page 3

4 Manual Handling (TLID1001A) ½ day + workplace assessment Training required under (customised to suit company/site) All staff (recommended every 2 yrs) Identify & Locate Underground Services (RIICCM202D) 4-5 hrs Required training under &/or project induction Civil workers, plant operators, engineers, supervisors, etc Supervisor Compliance Workshops Scaffolding & Formwork Dogging/Rigging Cranes & Load Shifting Mobile Plant Noise Confined Spaces Formwork 2-5 hrs (each) PCBU/Employer duty of care training under Training Provider Civil / construction supervisors & engineers who manage/monitor workers onsite Statement of Completion Certificate III in WHS (BSB30712) 4-5 days qualification 12 units Leading hands, HSCs and/or HSRs Certificate III qualification. T r a i n i n g M a t r i x, V 10, D e c e m b e r Page 4

5 HEIGHT SAFETY Safe Work at Heights (RIIWHS204D) Addresses levels 1 & 2 under revised Standard Workers conducting harness-based work at heights /Card Safe Work at Heights Refresher (RIIWHS204D) ½ day Refresher training addressing levels 1 & 2 under revised Standard Workers who need to upgrade certification /Card Undertake Aerial Rescue (AHCARB306A) 5 hrs Addresses level 3 under revised Standard (customised to suit company/site) All supervisors coordinating harness-based heights rescue /Card Perform Inspection for Height Safety Equipment Inspectors (MEM15004B) ½ day Addresses level 4 under revised Standard Personnel who visually check height safety equipment and determine remedial action /Card Contribute to Implementing & Maintaining WHS Management Systems-for Height Safety Managers (BSBWHS405A) 4 hrs Addresses level 5 under revised Standard Height Safety Managers /Card EWP Escape 4 hrs Required training and competency assessment /Provider EWP Operators Certificate of Completion. T r a i n i n g M a t r i x, V 10, D e c e m b e r Page 5

6 HIGH RISK WORK (HRW) LICENSING HRW Training & National Competency Assessments units & + WorkCover Plant operators must enroll with before work formal training / log book for Training (for ) Cranes (CN, C2, C6, CV) Approx. 4 days training + national units & for licensing purposes + WorkCover Crane operator for Slewing, Non-Slewing, Vehicle Crane Training (for ) Dogging (DG) 4 days training + national units & for licensing purposes + WorkCover Workers who dog & sling loads (pre-requisite for rigging) Training (for ) Elevated Work Platform (WP) training + national units & + WorkCover EWP Operator Training (for ) Forklift Truck (LF) 1- training + national units & + WorkCover Forklift truck operator Training (for ). T r a i n i n g M a t r i x, V 10, D e c e m b e r Page 6

7 Hoists (HM, HP) 1- training + national units & + WorkCover Hoist operator Training (for ) Rigging (RB, RI, RA) 4-6 days training + national units & + WorkCover Rigger Basic, Intermediate, Advanced Training (for ) Scaffolding (SB, SI, SA) units & + WorkCover Scaffolder Basic, Intermediate, Advanced Training (for ) Plant Operator - Refresher (eg. load-shifting, cranes & hoists, dogging, rigging, scaffolding, EWP) Refer VOC section 2-4 hrs PCBU duty of care requirements under WHS Training provider to refresh competency Experienced plant operator (recommended every 2 yrs) Statement of Completion/VOC card issued by training provider. T r a i n i n g M a t r i x, V 10, D e c e m b e r Page 7

8 SAFETY MANAGEMENT WHS Compliance Training - aligned to CRC Construction Framework (BSBWHS402A) unit from Certificate IV in WHS Project managers, site supervisors WHS Risk Management Training - aligned to CRC Construction Framework (BSBWHS404A) X1 unit from Certificate IV in WHS Project managers, site supervisors and SWC nominated supervisors Certificate IV in WHS - aligned to CRC Construction Competency Framework (BSB41407) 5-6 days 10 units WHS Supervisors, Coordinators Certificate IV in WHS Qualification Diploma of WHS (BSB51307) (self-paced) 9 units WHS Managers/Advisors Nationally Accredited Diploma Qualification SUPERSAFE WHS for Construction Supervisors Updated version now available Updated supervisor training incorporating WHS & (partial) CRC Competency Framework Approved CSA/MBA Training Provider Construction Supervisors & Team Leaders CSA/MBA Certificate of Completion. T r a i n i n g M a t r i x, V 10, D e c e m b e r Page 8

9 SPECIALISED WORK Testing & Tagging of Electrical Equipment Mandatory training under WorkCover NSW approved Nominated staff Statement of completion - issued by Rehabilitation/RTW Coordination Mandatory training for RTW coordinators Pending Changes WorkCover NSW approved provider Rehabilitation / RTW Coordinator Statement of Completion issued by Training Provider Certificate IV in Training & Assessment (TAE40110) Full course =10 units (7-10 days) qualification Induction, site trainers and/or competency assessors qualification Certificate IV TAE WHS Auditing 3-5 days Accredited program by or registration body &/or registered provider WHS internal auditor (according to company policy) (select program which is both nationally accredited & certified with registration body (eg RABQSA) Operate Support Equipment - Concrete Saw (RIIMPO208D) PCBU duty of care requirements under WHS Concrete saw operators Operate Support Equipment - Chainsaw (RIIMPO208D) PCBU duty of care requirements under Chainsaw operators. T r a i n i n g M a t r i x, V 10, D e c e m b e r Page 9

10 LV Release/Rescue (+ CPR) 3 hrs (2 hrs) Duty of care training under (annual refresher required), training provider Electricians, safety observers, supervisors Certificate of Completion Enter & Work in Confined Spaces (RIIWHS202D) Mandatory training to enter/supervise confined space Confined space workers, supervisors, etc (national accredited) Work Safely Around Power Sources, Services & Assets (CPCCCM3003A) (replaces old 5099 course) Training required by state (annual refresher required) Safety observers, supervisors & plant operators working near overhead/underground power /Card Explosive Power Tools (CCPCCCM2007A) 6 hrs PCBU Duty of care training no state licensing EPT operators Supervise Mobile Plant Operations (RIIMMPO401A) PCBU Duty of care training Mobile plant operators & spotters Operate Support Equipment - Load-Shifting (RIIMPO208D) + log book Operator training (LE, LS, LL and LB) Loads-shifting operators Statement of Attainment/Card Use Hand & Power Tools (RIISAM230D) + log book Operator Training Operators Statement of Attainment/Card. T r a i n i n g M a t r i x, V 10, D e c e m b e r Page 10

11 VERIFICATION OF COMPETENCY High Risk Licensing VOC (eg. crane hoist, dogging, rigging, scaffolding, EWP) Client / PCBU duty of care requirements under WHS Assessment tools should align to national accreditation Licensed plant operator (prior to job start) VOC Statement / Card Load Shifting (LB, LL, LS & LE) Client / PCBU duty of care requirements under WHS Assessment tools align to national accreditation Plant operator (prior to job start) VOC Statement / Card Hand/Power Tools - VOC Client / PCBU duty of care requirements under WHS Assessor to verify current competency Operators of hand/power tools (recommended prior to job start) VOC Statement / Card WORKPLACE TRAINING/ASSESSING Assessor Skill Set (TAEASS401B) (TAEASS402B) (TAEASS403B) 3 days Skill Set Supervisors who conduct on-site VOCs (Skill Set) Certificate IV TAE (TAE40110) 7 days + electives qualification Trainers, assessors & supervisors who conduct site toolboxes / training (Full Qualification). T r a i n i n g M a t r i x, V 10, D e c e m b e r Page 11