EMC research at the University of Twente
|
|
- Annabelle Gregory
- 8 years ago
- Views:
Transcription
1 EMC research at the University of Twente Prof.dr.ir. Frank Leferink Chair EMC 1
2 Studies: Interference via power supply onboard naval vessels Shielding of composite structures Coupling between antennas onboard naval vessels. Programs: Many, many radars to many countries New: Integrated mast (civil / MIL: CE101, CE102, CS101, so 30Hz-..MHz). Challenges (related to conducted EMI)» Many CE marked SMPS resonating: +30dB» Transients power lines coupled into ethernet» Filters with a lot of mutual parasitics: at 100MHz -100dB NSxx: small radar SMART-L ELR: 1344 transmit-receive elements, many power interfaces, mast is kast principle 2
3 EMC group at University of Twente Frank Leferink (also acting chair TE) (1 day/week, other: THALES) Frits Buesink (4 days/week) Projects IOP-EMVT MOPE (EMI and power drive systems), Dr. Dongsheng Zhao (afstudeerder UT), TU Delft, Nu EMC NMi Anne Roc h, promotie 12 oktober Nu EMC expert ASML THALES: Lightning w.r.t. composite structures, Alex Blaj, proefschrift afronding, now Hitec, UPS systems IOP-EMVT Power Quality & EMC, Roelof Timens IOP-EMVT Embedded Passives, Olga Tereshchenko FP7 EU: High Intensity Radiated Fields, Robert Vogt-Ardatjew Maritime Innovation, Bart van Leersum KP7 EU: Protection of Civil Infrastructures against EM Attack, Stefan van de Beek KP7 EU: Protection of Civil Infrastructures against EM Attack, Roelof Timens Visiting researchers: Fatou Diouf (France), Ahmed Wefky (Spain) M.Sc. Students, now: Pieter van Vugt, Laura Stoilescu 3
4 Power Electronics Many good results, best paper awards Chapter in an ebook (2012) Journal paper (2012) Defense thesis 12 October 2012 Now EMC specialist at ASML 4 4
5 PDS, radiated emission Electric field strength [dbmv/m] unshielded cable shielded cable + dv/dt + CMC+C Civil require ments Frequency [MHz] 5
6 UT, effects of lightning Nice results Example: Patent bearing Now thesis writing with pre-loading without pre-loading 6 6
7 UT, PQ&EMC Power Quality & EMC Develop models to predict interaction between modern electronic 400 equipment connected via the mains supply Cases: Carre building, high THD PV and PDS farm PV causing overvoltage Damage in windmill generator Status: 7 nov 2013 defence Transients, non linear effects Pieter van Vugt assists in behavioural models Writing thesis Voltage (V) Voltage (V) Time (s) Vhf[PE-N] Time (seconds) x
8 Embedded Materials New materials to reduce EMI EBG for reducing PDN (power distribution noise) signal integrity & EMI: 8 8
9 UT, HIRF-SE High-Intensity Radiated Fields, Synthetic Environment (HIRF-SE) Develop simulation techniques for EM fields in reflecting environments Jan Dec Received Voltage [dbuv] s stirring, pk 1s stirring, RMS 1s stirring, Av Frequency [MHz] 9 9
10 UT, Maritieme Innovation Concept of de mast is de kast for the whole ship Period: 1 jan dec
11 UT, Structures Strategies for the Improvement of Critical Infrastructure Resilience to Electromagnetic attacks 1 July Aug
12 UT, EMRP JRP-i10: Improved EMC Test Methods in Industrial Environments, from laboratory to industrial environment 1 July July 2017 WP1: Conducted emission WP2: Conducted immunity/susceptibility WP3: Radiated emission WP4: Radiated immunity/susceptibility WP5: EMC reference devices for round-robin tests WP6: Impact 12 12
EMC research at the University of Twente. Prof.dr.ir. Frank Leferink Chair EMC http://www.utwente.nl/ewi/te/
EMC research at the University of Twente Prof.dr.ir. Frank Leferink Chair EMC http://www.utwente.nl/ewi/te/ 1 First: EMC@THALES Studies: Interference via power supply onboard naval vessels Shielding of
More informationSpectrum sharing, door radar & mobiel breedband
AND/OR ITS SUPPLIERS. THIS INFORMATION CARRIER CONTAINS PROPRIETARY INFORMATION WHICH SHALL NOT BE USED, REPRODUCED OR DISCLOSED TO THIRD PARTIES WITHOUT PRIOR WRITTEN AUTHORIZATION BY AND/OR ITS SUPPLIERS,
More informationHarmonics and Noise in Photovoltaic (PV) Inverter and the Mitigation Strategies
Soonwook Hong, Ph. D. Michael Zuercher Martinson Harmonics and Noise in Photovoltaic (PV) Inverter and the Mitigation Strategies 1. Introduction PV inverters use semiconductor devices to transform the
More informationEMC Basics. Speaker : Alain Lafuente. Alain.lafuente@we-online.com
EMC Basics Speaker : lain Lafuente lain.lafuente@we-online.com WHT IS EMC? 2 CE Marking With the formation of the single European market, standardization was required to remove technical barriers to trade.
More informationEMC Expert System for Architecture Design
EMC Expert System for Architecture Design EMC Expert System for Architecture Design Marcel van Doorn marcel.van.doorn@philips.com Philips Electromagnetics Competence Center High Tech Campus 26, 5656 AE
More informationAutomotive EMI System
Automotive EMI System Page 1 Model Types Body Variants Car Geometry Board Net, Wire Path, ECU Configuration, Antenna Configurations... Parameters Affecting EMC Car Supply Net Voltage Regulator Signals
More informationR&D activities at ITA for High Energy Physics. F. Arteche
R&D activities at ITA for High Energy Physics F. Arteche OUTLINE 1. Introduction Aragon Institute of Technology (ITA) 2. ITA Activities 2008 & 2009 for HEP 3.R&D project for SLHC: EMC immunity studies
More informationUnderstanding SMD Power Inductors. Application Note. July 2011
Understanding SMD Power Inductors July 2011 Application Note Power inductors play an important role in voltage conversion applications by yielding lower core losses. They are also used to store energy,
More informationUNDERSTANDING AND CONTROLLING COMMON-MODE EMISSIONS IN HIGH-POWER ELECTRONICS
Page 1 UNDERSTANDING AND CONTROLLING COMMON-MODE EMISSIONS IN HIGH-POWER ELECTRONICS By Henry Ott Consultants Livingston, NJ 07039 (973) 992-1793 www.hottconsultants.com hott@ieee.org Page 2 THE BASIC
More informationPCB Radiation Mechanisms: Using Component-Level Measurements to
Radiation Directly from PCB Structures PCB Radiation Mechanisms: Using Component-Level Measurements to Determine System-Level Radiated Emissions Signal or component voltage appears between two good antenna
More informationPre-Compliance Test Method for Radiated Emissions of Automotive Components Using Scattering Parameter Transfer Functions
PreCompliance Test Method for Radiated Emissions of Automotive Components Using Scattering Parameter Transfer Functions D. Schneider 1*, S. Tenbohlen 1, W. Köhler 1 1 Institute of Power Transmission and
More informationCable Solutions for Servo and Variable Frequency Drives (VFD)
Cable Solutions for Servo and Variable Frequency Drives (VFD) Electric drive systems with continuous torque and speed control are widespread today. They allow an optimal adjustment of the drive with respect
More informationAn extended EMC study of an electrical powertrain for transportation systems
European Association for the Development of Renewable Energies, Environment and Power Quality (EA4EPQ) International Conference on Renewable Energies and Power Quality (ICREPQ 12) Santiago de Compostela
More informationUncertainty evaluations in EMC measurements
Uncertainty evaluations in EMC measurements Carlo Carobbi Dipartimento di Elettronica e Telecomunicazioni Università degli Studi di Firenze Politecnico di Milano - 20 Feb. 2009 1 Non - reproducibility
More informationMsC in Advanced Electronics Systems Engineering
MsC in Advanced Electronics Systems Engineering 1 2 General overview Location: Dijon, University of Burgundy, France Tuition Fees : 475 / year Course Language: English Course duration: 1 year Level: Second
More informationPredicting radiated emissions from cables in the RE02/RE102/DO- 160/SAE J113-41 test set up, using measured current in NEC and simple TX equations.
Predicting radiated emissions from cables in the RE02/RE102/DO- 160/SAE J113-41 test set up, using measured current in NEC and simple TX equations. D. A. Weston RE02Tx.rep 14-6-2004 NARTE Certified EMC
More informationApplication Note: Spread Spectrum Oscillators Reduce EMI for High Speed Digital Systems
Application Note: Spread Spectrum Oscillators Reduce EMI for High Speed Digital Systems Introduction to Electro-magnetic Interference Design engineers seek to minimize harmful interference between components,
More informationfor Communication Systems Protection EMI CD-ROM INCLUDED
Krešimir Malarić EMI Protection for Communication Systems CD-ROM INCLUDED Contents Preface xiii CHAPTER 1 Communications Systems 1 1.1 Components of Communications Systems 1 1.2 Transmitter Systems 2 1.2.1
More informationPWM Motor Drives and EMC in installations and systems
PWM Motor Drives and EMC in installations and systems Mart Coenen PWM Motor Drives and EMC in installations and systems Intro Problem definition Why What How Problem solutions Application results Conclusions
More informationCONDUCTED EMISSION MEASUREMENT OF A CELL PHONE PROCESSOR MODULE
Progress In Electromagnetics esearch C, Vol. 42, 191 203, 2013 CONDUCTED EMISSION MEASUEMENT OF A CELL PHONE POCESSO MODULE Fayu Wan *, Junxiang Ge, and Mengxiang Qu Nanjing University of Information Science
More informationTHE NARTE EMC ENGINEER CERTIFICATION PROCESS - A PERSONAL EXPERIENCE
THE NARTE EMC ENGINEER CERTIFICATION PROCESS - A PERSONAL EXPERIENCE Sandy Mazzola, NCE, EMC-002506 002506-NE BAE Systems Inc. NARTE NARTE is a worldwide, non-profit, professional telecommunications association
More informationRadiated emission measurement of a cell phone processor module using TEM cell
, pp.48-53 http://dx.doi.org/10.14257/astl.2013.28.09 Radiated emission measurement of a cell phone processor module using TEM cell Fayu Wan 1,2*, Qi Liu 3, Jian Shen 3, Jin Wang 3 and Nigel Linge 4 1
More informationSimulation électromagnétique 3D et câblage, exemples dans l'automobile et aéronautique :
Simulation électromagnétique 3D et câblage, exemples dans l'automobile et aéronautique : CST, Christophe Morin 1 www.cst.com Agenda - Présentation CST - Simulation câblage dans modèle 3D - Exemples automobile
More informationHow to Self-Certify For the CE Mark A Quick Start Guide by Dennis King - EMI Test Lab
How to Self-Certify For the CE Mark A Quick Start Guide by Dennis King - EMI Test Lab For questions and details contact Dennis at dennis@emitestlab.com Introduction The CE mark (an acronym for the French
More informationRated Power(W) 8W 2. EG-LED0840-01 8W 3. EG-LED1027-01 10W
14713221 001 Seite 2 von 37 Page 2 of 37 Model List: No Model Rated Voltage(V) 1. EG-LED0827-01 Rated Power(W) 8W 2. EG-LED0840-01 8W 3. EG-LED1027-01 10W 4. EG-LED1040-01 AC 100-240V, 10W 5. EG-LED1027-02
More informationwith Component Rating A Simple Perspective
Cat-6A UTP and Shielded with Component Rating A Simple Perspective Asef Baddar RCDD, DCD Sr. Technical Manager Leviton Middle East Category Specifications Agenda Terminology International & North America
More information2.996/6.971 Biomedical Devices Design Laboratory Lecture 2: Fundamentals and PCB Layout
2.996/6.971 Biomedical Devices Design Laboratory Lecture 2: Fundamentals and PCB Layout Instructor: Hong Ma Sept. 12, 2007 Fundamental Elements Resistor (R) Capacitor (C) Inductor (L) Voltage Source Current
More informationConsulting. IEEE Joint Meeting Rockford, March 28, 2011 2011 ROY LEVENTHAL
EMI-EMC EMC Theory and Test Consulting IEEE Joint Meeting Rockford, March 28, 2011 2011 ROY LEVENTHAL http://www.semiconductorsimulation.com http://www.semiconductormodel.com Roy.Leventhal@ieee.org 847-590-9398
More informationAND9015. A Solution for Peak EMI Reduction with Spread Spectrum Clock Generators APPLICATION NOTE. Prepared by: Apps Team, BIDC ON Semiconductor
A Solution for Peak EMI Reduction with Spread Spectrum Clock Generators Prepared by: Apps Team, BIDC ON Semiconductor APPLICATION NOTE Introduction This application note will outline Spread Spectrum Clock
More informationG019.A (4/99) UNDERSTANDING COMMON MODE NOISE
UNDERSTANDING COMMON MODE NOISE PAGE 2 OF 7 TABLE OF CONTENTS 1 INTRODUCTION 2 DIFFERENTIAL MODE AND COMMON MODE SIGNALS 2.1 Differential Mode signals 2.2 Common Mode signals 3 DIFFERENTIAL AND COMMON
More informationRadiated Emission and Susceptibility
Radiated Emission and Susceptibility Tzong-Lin Wu, Ph.D. EMC Lab Department of Electrical Engineering National Taiwan University Differential-Mode v.s. Common-mode Currents 1 Differential-Mode v.s. Common-mode
More informationRegulatory Compliance Services and Products
Regulatory Compliance Services and Products Compliance Testing EMC, Safety, Radio, Telecoms, EMF Consultancy & Research Regulatory Compliance, Management & RF Engineering Training Courses & Workshops Test
More informationAVX EMI SOLUTIONS Ron Demcko, Fellow of AVX Corporation Chris Mello, Principal Engineer, AVX Corporation Brian Ward, Business Manager, AVX Corporation
AVX EMI SOLUTIONS Ron Demcko, Fellow of AVX Corporation Chris Mello, Principal Engineer, AVX Corporation Brian Ward, Business Manager, AVX Corporation Abstract EMC compatibility is becoming a key design
More informationData Communications Competence Center
Importance of Cable Balance For Improving Noise Susceptibility Data Communications Competence Center DCCC03101702 July 11, 2007 Summary In a study of category 5e and category 6 UTP cables, a strong correlation
More informationELECTRICAL ENGINEERING
EE ELECTRICAL ENGINEERING See beginning of Section H for abbreviations, course numbers and coding. The * denotes labs which are held on alternate weeks. A minimum grade of C is required for all prerequisite
More information30 In Compliance October 2014 www.incompliancemag.com
30 In Compliance October 2014 www.incompliancemag.com Medical Devices in a Wireless World BY IVAYLO TANKOV While wireless technology is now an integral component of a wide variety of manufactured products,
More informationCommon Mode Choke Filtering Improves CMRR in Ethernet Transformer Applications. Application Note. June 2011
Common Mode Choke Filtering Improves CMRR in Ethernet Transformer Applications June 2011 Application Note Common mode chokes provide an effective EMI filtering solution for Ethernet transformer applications.
More informationEMC Standards: Standards of good EMC engineering
Electromagnetic Compatibility (EMC) IEEE Definition Origin, control, and measurement of electromagnetic effects on electronic and biologic systems. IEEE EMC Society Areas of Interest EMC Standards: Standards
More informationAN003. Evaluation of Anechoic Chambers For EMC Measurements Using A CNE. Overview. CNE III 9kHz to 2GHz Conducted and radiated output
Evaluation of Anechoic Chambers For EMC Measurements Using A CNE Overview Anechoic chambers are used for EMC testing primarily for radiated emissions (RE) and radiated immunity (RI) in the frequency range
More informationThe impact of the New EMC Directive 2004/108/EC
The impact of the New EMC Directive 2004/108/EC Presentation by Damon High Presentation Overview Brief overview of Electromagnetic Interference and Electromagnetic Compatibility EMC Directive and UK Legislation
More informationElectromagnetics Research at TU/e and Applications in EMC. by Anne Roc h and Anton Tijhuis a.roch@tue.nl or a.g.tijhuis@tue.nl
Electromagnetics Research at TU/e and Applications in EMC by Anne Roc h and Anton Tijhuis a.roch@tue.nl or a.g.tijhuis@tue.nl Full-time and Part-time Professors Anton Tijhuis Bart Smolders Huib Visser
More informationEMI in Electric Vehicles
EMI in Electric Vehicles S. Guttowski, S. Weber, E. Hoene, W. John, H. Reichl Fraunhofer Institute for Reliability and Microintegration Gustav-Meyer-Allee 25, 13355 Berlin, Germany Phone: ++49(0)3046403144,
More informationModule 11: Conducted Emissions
Module 11: Conducted Emissions 11.1 Overview The term conducted emissions refers to the mechanism that enables electromagnetic energy to be created in an electronic device and coupled to its AC power cord.
More informationDDX 7000 & 8003. Digital Partial Discharge Detectors FEATURES APPLICATIONS
DDX 7000 & 8003 Digital Partial Discharge Detectors The HAEFELY HIPOTRONICS DDX Digital Partial Discharge Detector offers the high accuracy and flexibility of digital technology, plus the real-time display
More informationSimulation and Design of Printed Circuit Boards Utilizing Novel Embedded Capacitance Material
Simulation and Design of Printed Circuit Boards Utilizing Novel Embedded Capacitance Material Yu Xuequan, Yan Hang, Zhang Gezi, Wang Haisan Huawei Technologies Co., Ltd Lujiazui Subpark, Pudong Software
More informationEMC / EMI issues for DSM: new challenges
EMC / EMI issues for DSM: new challenges A. Boyer, S. Ben Dhia, A. C. Ndoye INSA Toulouse Université de Toulouse / LATTIS, France www.ic-emc.org Long Term Reliability in DSM, 3rd October, 2008 www.ic-emc.org
More informationCurrent and emerging EMC activities within THALES (& University of Twente)
Presented at the Politecnico di Torino, 10 october 2007 Current and emerging EMC activities within THALES (& University of Twente) Frank Leferink (Frank.Leferink@UTwente.nl) Technical Authority EMC, Thales
More informationEM Noise Mitigation in Circuit Boards and Cavities
EM Noise Mitigation in Circuit Boards and Cavities Faculty (UMD): Omar M. Ramahi, Neil Goldsman and John Rodgers Visiting Professors (Finland): Fad Seydou Graduate Students (UMD): Xin Wu, Lin Li, Baharak
More informationFibre Optic Solutions for your Test and Instrumentation needs
Fibre Optic Solutions for your Test and Instrumentation needs Aerospace Test EMC/EMP Military Industrial Control High Energy Physics Automotive Test Custom www.point2point.co.uk Fibre Optic Solutions for
More informationMarine HF SSB Installation and Grounding. Anatomy of the Best Tour 2006
Marine HF SSB Installation and Grounding Anatomy of the Best Tour 2006 Marine HF Installation Considerations This document is meant to be an overview of Marine HF radio installation For detailed installation
More informationForum R.F.& Wireless, Milano il 14 Febbraio 2008 Dr. Emmanuel Leroux Technical Sales Manager for Italy emmanuel.leroux@cst.com 0039 340 3768950
Simulazione 3D elettromagnetica Time e Frequency domain Forum R.F.& Wireless, Milano il 14 Febbraio 2008 Dr. Emmanuel Leroux Technical Sales Manager for Italy emmanuel.leroux@cst.com 0039 340 3768950 1
More informationDeclaration of Conformity.
Declaration of Conformity. Type of equipment: Brand Name /Trade Mark: Type designation /model: Applicant: PTZ CAMERA SAMSUNG SCP2371HP SAMSUNG TECHWIN CO., LTD. In accordance with the following Directives:
More informationTuning a Monopole Antenna Using a Network Analyzer
11/21/11 Tuning a Monopole Antenna Using a Network Analyzer Chris Leonard Executive Summary: When designing a monopole antenna it is important to know at which frequency the antenna will be operating at.
More informationPOWER LINE FILTERS FOR SWITCHING POWER SUPPLIES
POWER INE FITERS FOR SWITCHING POWER SUPPIES ing. Eugen COCA *, prof. dr. ing. Dimitrie AEXA ** * EECTRICA SA - SD SUCEAVA - ROMANIA ** U.T. Gh. Asachi IASI - ROMANIA * SEM0kV - PRAM str. Stefan cel Mare,
More informationEMI-EMC Theory and Troubleshooting
EMI-EMC Theory and Troubleshooting IEEE EMC Meeting Chicago, February 16, 2011 2011 ROY LEVENTHAL http://www.semiconductorsimulation.com http://www.semiconductormodel.com Roy.Leventhal@ieee.org 847-590-9398
More informationILB, ILBB Ferrite Beads
ILB, ILBB Ferrite Beads Electro-Magnetic Interference and Electro-Magnetic Compatibility (EMI/EMC) avid B. Fancher Inductive Products ivision INTROUCTION Manufacturers of electrical and electronic equipment
More informationAdvanced Power Measurement and Analysis Software DPOPWR Datasheet
Advanced Power Measurement and Analysis Software DPOPWR Datasheet Power quality measurements computes THD, True Power, Apparent Power, Power Factor, and Crest Factor. These analysis outputs are shown in
More informationTEST REPORT EN 55014-2 (1997) +A1 (2001)
Page 1 of 23 TEST REPORT EN 55014-2 (1997) +A1 (2001) Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus Part 2: Immunity Report Reference No....
More informationForum R.F.& Wireless, Roma il 21 Ottobre 2008 Dr. Emmanuel Leroux Country Manager for Italy emmanuel.leroux@cst.com 340 3768950
Simulazione 3D elettromagnetica Time e Frequency domain Forum R.F.& Wireless, Roma il 21 Ottobre 2008 Dr. Emmanuel Leroux Country Manager for Italy emmanuel.leroux@cst.com 340 3768950 1 Agenda CST company
More informationLVDS Technology Solves Typical EMI Problems Associated with Cell Phone Cameras and Displays
AN-5059 Fairchild Semiconductor Application Note May 2005 Revised May 2005 LVDS Technology Solves Typical EMI Problems Associated with Cell Phone Cameras and Displays Differential technologies such as
More informationInvestigation of the Risk of Electromagnetic Security on Computer Systems
Investigation of the Risk of Electromagnetic Security on Computer Systems Changlin Zhou, Member, IACSIT, IEEE, Qun Yu, and Litao Wang Abstract Electromagnetic environmental effects (E3) and compromising
More informationPower Cardboard Modelling and Cable Model
3D High Frequency Modelling of Motor Converter and Cables in Propulsion Systems Stephane Yannick Njiomouo Master Thesis Stockholm, Sweden 2014 XR-EE-ETK 2014:012 Abstract The use of the power converters
More informationCurrent Probes, More Useful Than You Think
Current Probes, More Useful Than You Think Training and design help in most areas of Electrical Engineering Copyright 1998 Institute of Electrical and Electronics Engineers. Reprinted from the IEEE 1998
More informationDDX 7000 & 8003. Digital Partial Discharge Detectors FEATURES APPLICATIONS
DDX 7000 & 8003 Digital Partial Discharge Detectors The HAEFELY HIPOTRONICS DDX Digital Partial Discharge Detector offers the high accuracy and flexibility of digital technology, plus the real-time display
More informationEVALUATION OF RADIATED EMISSIONS FROM PRINTED CIRCUIT BOARDS AND CABLES AT POST-LAYOUT LEVEL
EVALUATION OF RADIATED EMISSIONS FROM PRINTED CIRCUIT BOARDS AND CABLES AT POST-LAYOUT LEVEL E. Leroux High Design Technology Corso Trapani, 16 139 Torino Italy S. Caniggia ITALTEL Castelletto di Settimo
More informationPerturbation of near-field scan from connected cables Sørensen, Morten; Franek, Ondrej; Pedersen, Gert F.; Baltsen, Knud A.
Aalborg Universitet Perturbation of near-field scan from connected cables Sørensen, Morten; Franek, Ondrej; Pedersen, Gert F.; Baltsen, Knud A.; Ebert, Hans Published in: 2012 IEEE International Symposium
More informationProfessor / Chair Electrical Energy Systems (full-time)
Professor / Chair Electrical Energy Systems (full-time) Eindhoven University of Technology, Department Electrical Engineering The mission of the Electrical Energy Systems (EES) group is the creation, dissemination
More informationCorrelation between OATS, Fully Anechoic Room and GTEM Radiated Emissions
Correlation between OATS, Fully Anechoic Room and GTEM Radiated Emissions Stephen Clay Introduction: Just a few words about myself. My name is Steve Clay and I work for Nokia Mobile Phones, and it is my
More informationTest Report. Prepared for: Technologic Systems, Inc. Model: TS-8820
Test Report Prepared for: Technologic Systems, Inc. Model: TS-8820 Description: Single Board Computer with Analog and Digital Inputs and Outputs, Relays, and RS-232/485 Ports To IEC 61000-6-1 (2005-03)
More informationCase Study Competition 2013. Be an engineer of the future! Innovating cars using the latest instrumentation!
Case Study Competition 2013 Be an engineer of the future! Innovating cars using the latest instrumentation! The scenario You are engineers working on a project team that is tasked with the development
More informationEMI Filter Design for Reducing Common-Mode and Differential-Mode Noise in Conducted Interference
International Journal of Electronics and Communication Engineering. ISSN 0974-2166 Volume 5, Number 3 (2012), pp. 319-329 International Research Publication House http://www.irphouse.com EMI Filter Design
More informationEMC countermeasures for High-Speed Differential Interfaces
TDK EMC Technology Practice Section EMC countermeasures for High-Speed Differential Interfaces How Do Common Mode Filters Suppress EMI in Differential Transmission Circuits? TDK Corporation Application
More informationPower Quality in Isolated Systems, Requirements and Examples Analysis.
Power Quality in Isolated Systems, Requirements and Examples Analysis. Daniel CZARKOWSKI, Edward SZMIT, Polish Register of Shipping, Janusz MINDYKOWSKI, Mariusz SZWEDA, Gdynia Maritime Academy Marek OLESZ,
More informationEN 301 489-17 v1.2.1 TEST REPORT FOR. 802.11ag/Draft 802.11n WLAN PCI-E Mini Card MODEL NUMBER: BCM94322MC REPORT NUMBER: 07U11529-5
EN 301 489-17 v1.2.1 TEST REPORT FOR 802.11ag/Draft 802.11n WLAN PCI-E Mini Card MODEL NUMBER: BCM94322MC REPORT NUMBER: 07U11529-5 ISSUE DATE: JANUARY 29, 2008 Prepared for BROADCOM CORPORATION 190 MATHILDA
More informationClamp Filters that Suppress Emission Noise Provide Immunity Against Surge Noise
TDK EMC Technology Product Section Clamp Filters that Suppress Emission Noise Provide Immunity Against Surge Noise TDK Shonai Corporation Satoru Saito Reduce Emission Noise from Cables Even if an electronic
More informationRF DISTURBANCES PRODUCED BY HIGH-POWER PHOTOVOLTAIC SOLAR PLANTS
LAPPEENRANTA UNIVERSITY OF TECHNOLOGY Faculty of Technology Department of Electrical Engineering Yaroslav Smirnov RF DISTURBANCES PRODUCED BY HIGH-POWER PHOTOVOLTAIC SOLAR PLANTS Examiners Professor Pertti
More informationMeasurement of RF Emissions from a Final Coat Electronics Corrosion Module
Engineering Test Report No. 37802-02 Rev. A Measurement of RF Emissions from a Final Coat Electronics Corrosion Module For : Canadian Auto Preservation, Inc. 390 Bradwick Drive Concord, Ontario CANADA
More informationISPS2014 Workshop Energy to Smart Grids Presenting results of ENIAC project: E2SG (Energy to Smart Grid)
ISPS2014 Workshop Energy to Smart Grids Presenting results of ENIAC project: E2SG (Energy to Smart Grid) Bidirectional isolating AC/DC converter for coupling DC grids with the AC mains based on a modular
More informationEMC TEST REPORT For. Webcam. Model Number: CAM67U
EMC TEST REPORT For Webcam Model Number: CAM67U Prepared for : Gembird Europe B.V. Wittevrouwen 56, 1358CD Almere, The Netherlands. Phone: +31-36-5211588 Prepared By : Shenzhen Meihua Electronic Technology
More informationAND8229/D. An Introduction to Transient Voltage Suppression Devices APPLICATION NOTE
An Introduction to Transient Voltage Suppression Devices Prepared by: Jim Lepkowski ON Semiconductor APPLICATION NOTE INTRODUCTION Transient Voltage Suppression (TVS) protection devices such as shielded
More informationCaracterísticas. Starligh SA 9 de julio 1595 Córdoba Argentina - 0351-4809210 / 4119600
Balun Activo - BALUN_ACT Características Single Channel Active Video Transmitter Full-motion color video signal up to 3900ft(1200m) via UTP cat5e/6 NTSC, PAL & SECAM video format compatible Real-time transmission
More informationHigh Frequency Power Quality
High Frequency Power Quality Dr. Ing. Jos Knockaert, MSc jos.knockaert@ugent.be CE-ABLE Seminar 21st June 2016-1 Project: TETRA HFPQ funded by Dec 2014 Nov 2016 Main goals: - How to measure? - What are
More informationWhite Paper: Electrical Ground Rules
Acromag, Incorporated 30765 S Wixom Rd, Wixom, MI 48393 USA Tel: 248-295-0880 Fax: 248-624-9234 www.acromag.com White Paper: Electrical Ground Rules Best Practices for Grounding Your Electrical Equipment
More informationConducted EMI filter design for SMPS
Conducted EMI filter design for Jukka-Pekka Sjöroos Helsinki University of Technology Power Electronics Laboratory Conducted EMI filter design for Introduction EMI in Common Mode(CM noise Differential
More informationPOWERING IN-FLIGHT ENTERTAINMENT EQUIPMENT FOR COMMERCIAL AIRCRAFT
POWERING IN-FLIGHT ENTERTAINMENT EQUIPMENT FOR COMMERCIAL AIRCRAFT WHITE PAPER: TW0061 December 2008 R. DeLuca L. Rozenblat 1 About the Authors Ron DeLuca Ron DeLuca is Vice President - Engineering of
More informationThe effect of inrush transients on PV inverter s grid impedance measurement based on inter-harmonic injection
European Association for the Development of Renewable Energies, Environment and Power Quality (EA4EPQ) International Conference on Renewable Energies and Power Quality (ICREPQ 10) Granada (Spain), 23rd
More informationGrounding and Shield Termination. Application Note 51204
Grounding and Shield Termination Application Note 51204 DEFINITIONS This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this
More informationReducing EMI and Improving Signal Integrity Using Spread Spectrum Clocking
Reducing EMI and Improving Signal Integrity Using Spread Spectrum Clocking Electromagnetic interference (EMI), once the exclusive concern of equipment designers working with high-speed signals, is no longer
More informationDeclaration of Conformity.
Declaration of Conformity. Type of equipment: Brand Name /Trade Mark: Type designation /model: Applicant: Network Camera SAMSUNG SND6011RP SAMSUNG TECHWIN CO., LTD. In accordance with the following Directives:
More informationIEC and CISPR Standards
IEC and CISPR Standards With thanks to Gideon Wiid, PhD student, and Paul van der Merwe EE Eng, 2 May, 2007 EMC Definition: Electromagnetic compatibility itself is defined as [1]: "the ability of an equipment
More informationSG1 WP1A WP1B 及 び WP1C 会 合 外 国 入 力 文 書
資 料 -2 SG WPA WPB 及 び WPC 会 合 外 国 入 力 文 書 ( 平 成 23 年 5 月 9 日 時 点 ) SG 番 号 受 理 日 提 出 元 題 名 備 考 42 200/8/ ITU-T SG 5 4 200/8/ WP 5D BR Study 40 200/7/2 Group Department 39 200/7/9 ITU-T SG 5 38 200/7/8 ITU-T
More informationDescription. Specifications and Ordering Information 330400 and 330425 Accelerometer Acceleration Transducers
Specifications and Ordering Information 330400 and 330425 Accelerometer Acceleration Transducers R Description These accelerometers are intended for critical machinery applications where casing acceleration
More informationTechnical Description. Transistor D.C. Chopper Controller Type GS 24 S
Technical Description Transistor D.C. Chopper Controller Type GS 24 S Table of contents 1. Getting started guide 2. General information 2.1. Characteristics 2.2. Accessories 3. Information about the Machine
More information5. MINIMIZATION OF CONDUCTED EMI. Chapter Five. switch-mode power supply decrease approximately linearly with the increase of the switching
5. MINIMIZATION OF CONDUCTED EMI Chapter Five MINIMIZATION OF CONDUCTED EMI The sizes of the energy storage elements (transformers, inductors, and capacitors) in a switch-mode power supply decrease approximately
More informationElectromagnetic Compatibility Considerations for Switching Power Supplies
Electromagnetic Compatibility Considerations Characterization of the EMI problem requires understanding the interference source Switching power supplies generate Electromagnetic Interference (EMI) by virtue
More informationActive noise control in practice: transformer station
Active noise control in practice: transformer station Edwin Buikema 1 ; Fokke D. van der Ploeg 2 ; Jan H. Granneman 3 1, 2, 3 Peutz bv, Netherlands ABSTRACT Based on literature and extensive measurements
More informationBSEE Degree Plan Bachelor of Science in Electrical Engineering: 2015-16
BSEE Degree Plan Bachelor of Science in Electrical Engineering: 2015-16 Freshman Year ENG 1003 Composition I 3 ENG 1013 Composition II 3 ENGR 1402 Concepts of Engineering 2 PHYS 2034 University Physics
More informationGood EMC Design Principles: cable routing
Good EMC Design Principles: cable routing Keith Armstrong describes three important techniques for cable routing in metal cabinets, whether the cables are bundles of individual wires, or individual or
More informationCPCI-3U-AC-300W-R. Rugged 300W AC Input 3U CompactPCI Power Supply. Electrical Specification for: Telkoor Part Number: 900-4602-0000
Electrical Specification for: CPCI-3U-AC-300W-R Rugged 300W AC Input 3U CompactPCI Power Supply Telkoor Part Number: 900-4602-0000 GENERAL SCALE RELEASE DATE 12/9/06 SHEET 1 OF 6 REVISION HISTORY Rev Level
More informationEMC STANDARDS STANDARDS AND STANDARD MAKING BODIES. International. International Electrotechnical Commission (IEC) http://www.iec.
EMC STANDARDS The EMC standards that a particular electronic product must meet depend on the product application (commercial or military) and the country in which the product is to be used. These EMC regulatory
More information