itrack OTR Tyre Monitoring Making Mines Safer & More Productive

Transcription

1 i itrack OTR Tyre Monitoring

2 OTR itrack TPMS The Translogik Off-the-Road (OTR) itrack Tyre Monitoring System provides fast, accurate, reliable real-time data on the condition of vehicle tyres, combined with live tracking of vehicle location and status. itrack provides a rugged and reliable solution with a range of features that allow mine operators to track their vehicle s tyre temperature and pressure, speed, braking and location in real-time and receive early warning of potential problems or hazards. This live data allows swift remedial action to be taken, which can be the difference between safe mine operation and a major incident. By ensuring the vehicle s tyres are operating within recommended temperature and pressure limits, itrack brings increased levels of safety to both the vehicle drivers and the technicians that work on them. From a commercial perspective, by ensuring that tyres are correctly inflated, tyre life is extended and costly down-time from repairs and intervention is reduced, improving productivity. Alarms trigger when user configurable operational threshold levels, such as tyre temperature, are exceeded, providing early warning of potential tyre or vehicle failure. Translogik itrack browser interface screenshots All data from the itrack system can be monitored remotely, in real-time, from any location with an internet connection via our browser based interface or mobile apps. The resilient Translogik servers reside in a secure offsite data storage centre, with full data backup, powered by a private substation running independently of the national power grid. Emergency power via UPS and diesel generator. i Live tracking of vehicle location Track your vehicles remotely, 24/7. Always know where your vehicles are and how they re performing.

3 KEY BENEFITS Improve driver & technician safety Reduce tyre maintenance costs Reduce vehicle down-time Increase productivity Extend tyre life Improve fuel efficiency by up to 8%* Gain insights from a range of data reports (pdf & xls) * Actual savings achieved by itrack systems currently in use around the globe. KEY FEATURES Real-time temperature & pressure monitoring Live GPS tracking of vehicle status & location Hermetic sensors - impervious to liquids & chemicals User configurable alarms & automated alerts Remote monitoring via web or mobile device Push-data enabled Update map overlays as mine footprint changes Geo-fencing Features such as geo-fencing, real-time and phone alerts via Wi-Fi or GSM** and push-data services make itrack an extremely powerful and versatile system specifically designed to withstand the harsh and demanding environments of the mining, earth-moving and construction industries. ** Additional local network charges may apply. Live tracking of temperatures & pressures Continuous monitoring of key tyre data provides early warning of problems, allowing you to avoid expensive tyre failures caused by overheating and incorrect pressures. Reducing tyre costs and maximising the productivity of every vehicle. Live vehicle status information Monitor your entire vehicle fleet in real-time. Receive automated alerts and notifications based on your key parameters to maximise operating performance.

4 OTR itrack TPMS System Overview Translogik DVIS (Dynamic Vehicle Information MobiTrack System) browser interface screenshots Translogik s new mobile application for Android. All data from the DVIS can be monitored remotely, in real-time, Check tyre from status any location quickly with by the an side internet of the vehicle connection - no need via to our gain browser access based to the interface cab. or mobile apps. Configure itrack systems & update tyre positions. The resilient Translogik servers reside in a secure offsite data storage centre, with full data backup, powered by a private substation running independently of the national power grid. Emergency power via UPS and diesel generator. i Settings such wheel layout/numbering, vehicle registration, in-cab warning levels, Live tracking and enabling/disabling of vehicle locationatmospheric pressure compensation can be accessed through the and how they re MobiTrack performing. configuration. Track your vehicles remotely, 24/7. Always know where your vehicles are

5 OTR itrack TPMS TKPH Calculation Loaded and unloaded weights can be defined for each vehicle The load and drop areas can be defined using geo-fences Calculated taking into account loaded and unloaded speeds and distances Number of cycles are also counted and reported Geo-Fencing Keep your employees and assets safe. A Geofence is a predetermined area or boundary that is set for a particular vehicle fitted with itrack. If the vehicle crosses that virtual boundary or geofence area, then the tracking software can alert you. The system allows for multiple concurrent geo-fence zones to be defined to ensure that vehicles are only operating in approved areas, further increasing the safety of the mine. Robust, accurate and reliable The itrack system receives information on tyre temperature and pressure from the sensors (for up to 6 wheel positions), displaying it directly to the driver via the in-cab display, whilst simultaneously logging and uploading live data such as braking, vehicle speed, route travelled, fuel consumption and location to a central location via Wi-Fi or GSM. itrack uses the CAN Bus interface, providing the ability to integrate with other vehicle systems. i

6 Return on Investment: Case Studies Thanks to the real-time information we now have from the itrack system and the control this gives us, we are able to provide a safer environment for our workers, increase the average performance of the tire by about 200 hours, reduce the average time between tyre incidents and failures, and increase the average speed of our trucks by more than 20%, which means that every hour of using the tires is more productive than before, allowing us to increase considerably our production rates from the mine Superintendent of Projects and Development DMH CODELCO, Chile. The same Chilean study demonstrated that running tyres at the correct pressure at all times has saved US$35,000 of fuel per truck per annum. itrack s magnetically mounted sensor makes fitting quick, reliable, and safe.

7 T New features for D Mapping with gtrack provides alerts of excess G-force, pitch, yaw, roll and rate of descent. Logged onto itrack server. Helps detect: Poor driving Mechanical failure Poor load distribution TYRELAB Translogik & itrack - A commitment to excellence Translogik utilises its own staff to design and manufacture sensors/systems for the automotive industry. The Translogik systems are focused on maximising tyres life/usage and encouraging safe working practices. Translogik will offer a data analyst service as part of our solution, which will include reporting potential defects that may result in vehicle failure and potential workforce hazards. We continue to listen to customer feedback which in turn will lead to a continuous development programme of the itrack solution as new/improved technologies become available.

8 OTR itrack TPMS Product Specification Tyre Sensor Range & Accuracy Pressure Range: psi (absolute) Pressure Accuracy: ±2psi up to 150psi, ±3 psi from 150psi up to 185psi Temperature Range: Operating -25 C to +80 C (±2 C) Survival -40 C to +125 C (±2 C) Temperature resolution : 1 C Receiver Electronics Operating Range: -10 C to +55 C (±2 C) Frequency: MHz Modulation Type: FSK Emission Compliance: MPT1340 and ETS Effective Radiated 100uW Power (ERP) approximate: Activation Pressure: 20psi absolute (approx. 5.5psi gauge) or higher for 10s Deactivation Pressure: Below 7psi absolute (approx -7.5psi gauge). In-Cab LCD Display Operating Range: Survival Range: 0 C to +50 C (±2 C) -20 C to +70 C (±2 C) Burst Duration: Burst Gap Duration: Total Duration: 52 to 60ms 19 to 20ms 123 to 140ms Sample Interval: 1.8 to 3.2s Extra Transmissions: 3s Up to 4 years warranty available itrack System Components Sensors are bonded directly to the inside of the tyre using a patch. Solution consists of: 6 Tyre Sensors (As shown) 1 In-Cab Receiver & Antenna 1 In-Cab Display/Tracking Unit 1 Power Cable Assembly Sensor to cab communication via proprietary communication protocol, operating in the 433MHz ISM band, Cab to server communication via GSM or Wi-Fi Features such as geo-fencing, real-time and phone alerts via Wi-Fi or GSM and push-data services make itrack an extremely powerful and versatile system specifically designed to withstand the harsh and demanding environments of the mining, earth-moving and construction industries. sales@trans-logik.com 1 Landscape Close, Weston on the Green, Oxon, OX25 3SX, UK Tel: +44 (0) Fax: +44 (0) twitter.com/translogik