FT-1000/GPS-N. System of remote monitoring and control of physical

Transcription

1 FT-1000/GPS-N System of remote monitoring and control of physical Localization of vehicles during transport by sending the values of temperature, RH%, etc.. with relative alarm threshold is exceeded. Send data from the remote control unit in ecology, agriculture, etc. This system of recording and remote control uses public networks of mobile phones to send data through a modem technology with automatic SMS, directly to the PC remotely. The computer stores the readings and compares them with the alarm thresholds set by the user. Should you encounter any overruns, start the alarm, in various ways: sound, SMS and . In the application in a motor vehicle, the transmitter module of the SMS, which has very small dimensions, must be positioned in the cabin. The installation is very simple, the only connections to make are those related to power supply 12 V / DC and the insertion of the temperature probe inside the body of the vehicle. The card FT-105/RF, which is located inside the module FT-1000/GPS-N, is fed with a lithium battery of long life, easily replaceable, and must be programmed initially in place, inserting the timing of SMS sending and the identification code and any calibration offset. The GPS sensor integrated with the modem, placed near the windows, allows you to locate the coordinates that will be processed automatically along with the value of temperature, RH%, etc.., When, PC can convert them to a specific index in the map or geographical. The map will display the path and also where you find the vehicle in real time. In the case of fixed stations, the user can even opt to install the GPS sensor. Pagina 1 di 8

2 Near the computer, there will be a receiver module, complete modem with its SIM card, which will have the task only to receive data and optionally with an SMS alert the driver, or other person concerned of an alarm. The modem must be inserted the SIM card left by one of the many telephone operators in the market. Contracts for private persons have very low costs, you will only need to make a yearly charge of a few Euros, in order to maintain active the number given by your service provider. TECHNICAL SPECIFICATIONS Module power "FT-1000/GPS-N" 12 Volt / Cc. Consumption: 200 ma the AC Temperature Probe NTC: Resolution 0.1 C, accuracy + / C. Range: C / +105 C with Offset Calibration. Digital Probe Relative Humidity% - Range: 0-100% with accuracy + / - 1.8% FS. RS232 communication port / bus 12C. Internal buffer memory modules of 6,400 readings with date and time value. Plastic container with dimensions 250 x 190 x 100 mm. The ability to view a geographical map with the location of the vehicle in motion, helps to optimally manage the logistics business Pagina 2 di 8

3 SOFTWARE Display at the same time all of the graphics of the probes in the monitoring system and Printing Ability to display the graph of a single detector Window with details and filters-probe ID, date, description in real time Audible alarms, and SMS for overcoming of the minimum and maximum Calibration Offset Ability to export to Excel and print graphs Ability to view the graph from portable devices, network or the Internet The program is cross-platform, which runs on Windows operating systems, Mac-OS, Linux. Initially you have to program all modules FT-1000/GPS-N in the monitoring system software with the "FT-Config" (ID, range data transmission, phone no. Want to send the data string. Temperature In this next window Display-only options forms you must or combined enter the Temperature data relative / to RH% the coordinates are self-powered of where with the a long seat with battery your life PC Lithium. and modem tab there receiver, is a small his cell button phone black, number crushing (SIM), activates the links, a red the reporting LED that stays of errors on made for 10 and seconds time tracking allowing SMS the PC. to program the radio module. shall be compulsory to indicate the name logger, the type and timing of transmission. modules also have a buffer memory of 6400 readings which can be downloaded at any time Pagina 3 di 8

4 In this next window options you must enter the data relative to the coordinates of where the seat with your PC and modem receiver, his cell phone number (SIM), the links, the reporting of errors made and time tracking SMS. Request to view the map and its path made Pagina 4 di 8

5 On the map displays the entire route of the truck with the ability to see the date and time, and also the temperature / RH% of the single reading. The last reading with the position of the vehicle, is displayed as an icon on the move. Placing the index of the mouse on the arrows of the various readings received, you can get more information SETTING ALARMS Displaying graphs and values received in real time Pagina 5 di 8

6 SAVING AND DISPLAYING DATA RECORDING AND CANCELLATION Saving data to Excel for further processing The desktop program "FT-105/RF-Plus" also has a web part that allows you to simply display graphics and measured values of the temperature / RH% in real time from any browser, either from PC Tablet / Smartphone. Just type in the address of the server "FT-105/RF-Plus" more '": 6161" to easily view a graph of the temperature / RH% as per attached picture. If you want to see the console from the web interface should add "6161/console" the server address "FT-105/RF-Plus From the Play Store Google Android Smartphone you can also download the free app FT105RF-Mobile that allows you to have real-time, even away from the office (giving a public IP address), the situation of various cells with temperature / RH%. With the program open, and the wi-fi enabled, simply press the Options button (Settings) and set the server address "FT-105/RF-Plus" and the door which in our case will be Now even the Apple Store, you can also download the free app FT105RF allowing you to have real-time temperature and Relative humidity%, with corresponding alarm threshold is exceeded, the various cells, environments, etc.. Just set the correct server address "FT- 105/RF-Plus" and the door which in our case is 6161, from the inside Impostazioni/FT105RF, to start using the app. Pagina 6 di 8

7 System FT-1000/GPS-NK1 In the cabin of the vehicle is positioned the control data acquisition temperature, RH%, etc.. This will send the data received from the sensor, connected via cable inside of the body by means of SMS messages, directly to the venue where they will be recorded and analyzed. System FT-1000/GPS-NK2 wireless On the vehicle if there is the possibility of introducing a temperature probe cable from the cab to the body (see trucks or trailers), there is also a wireless system that involves placing one or more modules in the chest radio with internal sensor Temperature, RH%, etc.., powered by a lithium battery. These wireless modules send in the cabin, by radio, the data to the receiver "FT-1000/GPS-NK2" which will, in turn, sends them, via SMS, to the office where a PC will display the received data and arrange for any alarms. Pagina 7 di 8

8 Application with fixed units in agriculture, ecology, restoration, etc.. The two monitoring systems can be very useful and inexpensive to monitor the microclimate, level sensors, chemical sensors, etc.. The applications, however, are many. Radio module for Temperature with external sensor system FT-1000/GPS- K2. Also available with a sensor inside the container. ECONORMA S.a.s. Prodotti e Tecnologie per l Ambiente SAN VENDEMIANO TV - Via Olivera 52 - ITALY Tel info@ economa.com Pagina 8 di 8