FLEET MANAGEMENT & CAR SECURITY SYSTEM GPRS/GPS

Transcription

1 FLEET MANAGEMENT & CAR SECURITY SYSTEM FOR PROVIDERS AND CUSTOMERS The Tracker Server Communication Program for data collection The Tracker Client Map Program intended for dispatching desks The GSM/GPRS Communicator to be installed in individual cars

2 GPS GSM NET GPRS CONNECTION VOICE, DATA, SMS DIRECT ACCESS TO CAR UNITS The Tracker Server program is intended for PC installation at the customers places. If the customer does not want to invest into the server equipment or into purchasing maps, he can use the services of GSM MODEM TRACKER SERVER GSM MODEM the existing Fleet Management & Car Security service providers. The company of LEVEL also ranks among these providers for a monthly lump-sum fee. GSM MODEM RS 232 GSM / GPRS OPERATOR IP CONNECTION SW TRACKER CLIENT SW TRACKER CLIENT SW TRACKER CLIENT SW TRACKER CLIENT AND MAPS AND MAPS AND MAPS AND MAPS LOCAL NET INTERNET The minimum requirements for the PC configuration are: Pentium 2.5 GHz, 1 GB RAM, 128 MB Video Card, 40 GB HDD, permanent Internet connection (64 kbit/sec.) with a fixed public IP address, the GSM modem for direct communication with individual units. The computer is permanently in operation for on-line data reception from the communicating units and for on-line data transfer to LAN or to the authorized dispatcher s desks connected to the Internet anywhere in the world. The individual clients access from individual dispatcher s desks is secured by a password and the Firewall gate. The program runs in Windows and on the basis of the SQL database system. Part of the Tracker Server program is the Admin Program which enables operators to add mobile units into the system, to update vehicle data and set the access rights.

3 Tracker Client is a map program that can be installed on any dispatching computer without limitations. The program includes the perfect and detailed NAVTEQ cartography covering all West and Central European countries. The user can either purchase the complete map file or choose individual countries. The minimum requirements for the PC are: Pentium 2.5 GHz, 512 MB RAM, 128 MB Video Card, 40 GB HDD, Internet connection (64 kbit/sec.). The program can be installed on the same computer as the Tracker Server program. The Tracker Client program enables operators to track and supervise individual vehicles on-line, to evaluate the alarm signal received from a car and to send a message to the terminal or to establish voice communication provided that the communication terminal is connected to the mobile unit in the car. The program enables operators to change parameters in the unit remotely in order to adjust its behaviour. The required outputs of the unit can also be switched on remotely. The list of vehicles accessible for the given user are clearly displayed using the tree structure and further divided by individual companies, divisions or business units. To display their current positions, simply enter the selected vehicle or a group of vehicles in the map. The following data are registered for each individual vehicle: Current state of the given vehicle state of connection, direction (heading) and speed and the address of the position on the map. Current state of the given journey setting off on the journey, keeping the planned route, duration and location of the last break, the driver s name and phone number, the type of journey (business/private). Vehicle properties picture of the vehicle, licence number, type of vehicle, loading capacity, utility and total weight. Vehicle data number, company, division, contact data to the vehicle administrator. Log book in the text form clearly divided by days and journeys. The log book contains data on each individual journey collected automatically from the vehicle unit, (time: from to, from where to, via, distance, time, speedometer, type of journey) and other editable data such as: driver, purpose and type of journey and remarks. History a detailed report covering all events in the unit and all values measured in the vehicle. Selected journeys can be displayed on the map and the vehicle can be tracked and monitored point by point. The points where the speed was exceeded are highlighted red. The intelligent algorithm displays the individual points of the given journey per 200 metres at low speed of the vehicle and per up to 2 kilometres at high speed of the vehicle. This enables the System to display the route perfectly with minimum demands for data transfer or the memory capacity of the unit.

4 FEATURES The main function of the unit is maintaining the permanent on-line GPRS connection with the server, storing the positions of covered routes and the measured data in the memory, identifying drivers according to the chip key used, distinguishing between business or private journeys and providing communication between the drivers and dispatchers. Other features of the unit are: Connecting a wide range of alarm sensors to measure and evaluate alarms. Vehicle unlocking evaluation after applying the ID chip, using the remote controller or using the wireless ID card. Measuring, recording and regulating temperature and other quantities, with the follow up reaction if the preset limits are exceeded. Controlling the connected appliances remotely or, possibly, stopping the vehicle conditionally. Connecting to the vehicle electric system with the +12 V and ground wires only. Connection PDA as a terminal for navigation or communication with the dispatchers. Voice and SMS communication with the dispatchers. Connecting a printer for the printing of short messages. Evaluation of passing through zones preset on the map. As the unit to be installed in the vehicle, the programmable GB060 GSM/GPRS Communicator by Level is used. The Communicator includes the GSM module, the GPS module, the input and output interface circuits, the memory and the programmable processor core. This Communicator is unique by its shockproof construction in an aluminum box, high reliability and its assembly flexibility as well as by a wide choice of programmable functions and connectable accessories. The assembly flexibility lies in the possibility of choosing the model without the GPRS function, without the GPS module, communication board or the backup battery. Basic Specifications: Communication Audio, SMS, Data, GPRS Power Supply V DC Input (standby/charging) 18 ma/150 ma Back-up Power Supply 24 hours 8 Binary Inputs/Outputs 12 V / open 1A collector Separate Relay Contact 50 V / 6 A RS 232 Digital Bus Size For connecting a PC, a printer, a keyboard, the PDA or another RS 232 device For connecting temperature sensors, chip keys, the A/D converter 145 x 70 x 41 mm Models available: GB GSM Module GPRS Function GPS Module Digital Bus Internal Back-up Battery* * The battery can be optionally ordered for all models available

5 The mobile programmable unit is supplied (as default) with the configuration preset according to the accessories selected. Any changes in the setting can easily be made through SMS or with the Control Panel program. Connection with the unit is either local (cable) or remote (via the GSM network). INSTRUCTIONS AND ACTIONS The configuration of the LEVEL GB 060 Communicator enables operators to preset the actions which will be triggered on detecting the binary input activity, on reaching a speed or a temperature limit, on reaching a limit analog value of the given input, on detecting the key log-in or log-out activity, on passing through the circle preset on the map, on driving the preset distance, on ringing through from the preset phone numbers, on reaching the planned time of the given action, on resetting the unit, on the power supply drop-out and restoration, on switching on the memory of the report, on a short-circuit at the output, on reaching the minimum credit,...etc. The preset action can also be triggered, permitted or banned by an incoming short message containing the name of the action. Each preset action may contain several individual instructions, for example: to make a call, to send a short message, to write a message into a report, to switch on the output, to log-out a key, to start a timer, to decrease consumption, to permit another action,... etc. With the help of this algorithm, the required behaviour of the unit can easily be configured to meet even very special requirements of the customers. Minimum requirements for PC: pentium, 64 MB RAM, serial port or USB with RS232 converter. Car Cabine Equipment ED Microphone ED Loud speaker with amplifier ED LED with cable ED Button with cable Other Accessories ED Printer Pocket PC for navigation and communication ED LCD communication terminal + keyboard Sound Signalization ED Sound signalization piezo ED Interrupted sound and LED signalization 12 V ED Alarm Siren 120dB Power Supply ED Internal Backup Battery 600mAh 8hour SA AC/DC Adapter 12V/500mA Cabling CB Serial cable COM Port PC ED Parts for instalation in car CB Equipment for electrical assembly CB Connector 2 sockets with cables CB Connector 4 sockets with cables CB Connector 6 sockets with cables CB Connector 10 sockets with cables CB pin,6-pin,4-pin connect.1 pc each+pins Antennas GSM, GPS ED GSM antenna 3dB - magnetic rod with cable 3m ED GSM antenna 3dB - flat for glue with cable 3m ED GSM antenna - direct rod without cable ED GPS active antenna Sensors ED Incline sensor ED Microwave room sensor - motion detector ED Crash sensor ED Hood contact ED Thermal sensor Arm and Disarm Equipment ED Set Wireless Card Receiver and 2 ID cards ED ID card Wireless ED Remote Control Receiver + 2 Remote controller ED Remote Controller ED ID key reader ED ID key with the plastic holder

6 AUTOALARM WIRELESS CARDFLEET MANAGEMENT & SECURITY SYSTEM The LEVEL GB 060 unit can also function as a highly effective silent autoalarm which means that the GB060 unit can provide very comfortable and automatic car security. When unauthorized handling or operating the vehicle (banking, opening the bonnet, starting up the engine, movements in the car or in the cab etc.), the GB 060 communication unit finds out whether the wireless authorization ID card is within the reach. If the card is not detected, a silent alarm is activated by sending alarm messages to preset cellphone numbers (owners of the vehicle, drivers) or to the GSM modem of the supervising head office. Here, the message is immediately evaluated and automatic actions are triggered in order to display the vehicle on the map and to solve the alarm state. THE HI-JACK FUNCTION The alarm is provided with the Hi-Jack function to trigger the alarm automatically if the vehicle is moved out of the reach of the ID card. EAVESDROPPING AND BLOCKING THE ENGINE REMOTELY Both the driver and the supervising head office can eavesdrop the cab of the vehicle in case of the alarm through the hidden microphone. If deemed advisable, they can shut down the vehicle remotely. ED Microwave Motion Detector ED Incline Sensor ED ID Card Receiver ED Crash Sensor Before the actual shut-down a siren is activated and the speed of the vehicle is monitored. The engine will not be switched off until the speed drops to 20 kilometres per hour. AUTOALARM SETS Several typified autoalarm sets are available. Individual sets differ in the number of alarm sensors, in the way of alarm activation and deactivation and in the respective configurations. Each individual set ED Microphone ED Loud speaker with Amplifier ED Alarm Siren 120dB ED Key Alarm is accompanied with the user manual. The user setting (according to the manual) can be carried out by sending three or four short messages. ED Button with Cable ED Hood Contact ED LED with Cable ED Relay - Immobilizer MOUNT SET

7 COMMUNICATION WITH THE DISPATCHERS OR WITH THE HEAD OFFICE If you start the program of the communication terminal on the pocket PC, you will be able to communicate by voice or by SMS between the dispatchers (or the head office) and the drivers to set and confirm assignments on route. An economical version of the communication terminal is a text LCD display and a keyboard. PDA NAVIGATION The LEVEL GB 060 unit enables operators to connect a portable pocket PC via the RS 232 interface. After starting any navigation program, navigation according to the planned route is initiated. Current position, the direction of movement and a series of other data such as the current speed, number of kilometres covered, the distance to the point of destination left, the estimated time of arrival are displayed on the map. When driving, the driver is informed about road branches and junctions as well as about any deviation from the planned route by voice. These considerable time and fuel & oil savings will mainly be appreciated by those companies that have to search for particular addresses of their clients.

8 Effective utilization of vehicles Making the driver s time more effective Fuel & Oil Vehicle security, insurance Cargo protection Minimum operating costs owing to GPRS 38% 27% 15% 20% 50%