1 1.5" (38 mm) Diameter
|
|
- Jonah Hudson
- 8 years ago
- Views:
Transcription
1 CAB Cable Rings and Saddles are offered in all sizes and materials. Please call or if your preferred item is not listed on these charts. TABLE OF CONTENTS Part Numbers for 1.5 inch (38mm) diameter CAB Cable Rings & Saddles...Page 2 Part Numbers for 2 inch (51mm) diameter CAB Cable Rings & Saddles...Page 3 Part Numbers for 2.5 inch (64mm) diameter CAB Cable Rings & Saddles...Page 4 Part Numbers for 3 inch (76mm) diameter CAB Cable Rings & Saddles...Page 5 Part Numbers for 3.5 inch (89mm) diameter CAB Cable Rings & Saddles...Page 6 Part Numbers for 4 inch (102mm) diameter CAB Cable Rings & Saddles...Page 7 Part Numbers for 4.5 inch (114mm) diameter CAB Cable Rings & Saddles...Page 8 Part Numbers for 5 inch (127mm)diameter CAB Cable Rings & Saddles...Page 9 Part Numbers for 6 inch 152mm) diameter CAB Cable Rings & Saddles...Page 10 Part Numbers for 8 inch (203mm) diameter CAB Cable Rings & Saddles...Page 11 Part Numbers for CAB Cable Saddles only...page 12
2 PART NUMBERS FOR CAB AND A B C D E F G H I J K L M 1 1.5" (38 mm) Diameter & & & & & & 2 Material --> Galvanized Clad SS Galv. SS Galv/AL 3 Galv/AL /Brass 4 5 Standard 1/4" (6.4 mm) Medium 1/4" (6.4 mm) Long 1/4" (6.4 mm) Standard 5/16" (7.9 mm) Standard 3/8" (9.5 mm) Medium 3/8" (9.5 mm) Long 3/8" (9.5 mm) Standard 7/16" (11.1 mm) Long 7/16" (11.1 mm) Standard 1/2" (12.7 mm) Medium 1/2" (12.7 mm) Long 1/2" (12.7 mm) Standard 9/16" (14.3 mm) Standard 5/8" (15.9 mm) Long 5/8" (15.9 mm)
3 PART NUMBERS FOR CAB AND 2" (51 mm) Diameter & & & & & & Material --> Galvanized SS Galv. SS Galv/AL Clad Galv/AL Standard 1/4" (6.4 mm) Medium 1/4" (6.4 mm) 1030 Long 1/4" (6.4 mm) Standard 5/16" (7.9 mm) Standard 3/8" (9.5 mm) Medium 3/8" (9.5 mm) Long 3/8" (9.5 mm) Standard 7/16" (11.1 mm) Long 7/16" (11.1 mm) 7617 Standard 1/2" (12.7 mm) Medium 1/2" (12.7 mm) 1046 Long 1/2" (12.7 mm) 1045 Standard 9/16" (14.3 mm) Standard 5/8" (15.9 mm) Long 5/8" (15.9 mm)
4 PART NUMBERS FOR CAB AND 2.5" (64 mm) Diameter & & & & & & Material --> Galvanized Clad SS Galv. SS Galv/AL Galv/AL /Brass Standard 1/4" (6.4 mm) Medium 1/4" (6.4 mm) Long 1/4" (6.4 mm) 6805 Standard 5/16" (7.9 mm) 1058 Standard 3/8" (9.5 mm) Medium 3/8" (9.5 mm) Long 3/8" (9.5 mm) 1061 Standard 7/16" (11.1 mm) Long 7/16" (11.1 mm) Standard 1/2" (12.7 mm) Medium 1/2" (12.7 mm) Long 1/2" (12.7 mm) Standard 9/16" (14.3 mm) Standard 5/8" (15.9 mm) Long 5/8" (15.9 mm) 1064
5 PART NUMBERS FOR CAB AND 3" (76 mm) Diameter & & & & & & Material --> Galvanized Clad SS Galv. SS Galv/AL Galv/AL /Brass Standard 1/4" (6.4 mm) Medium 1/4" (6.4 mm) 6619 Long 1/4" (6.4 mm) 1068 Standard 5/16" (7.9 mm) Standard 3/8" (9.5 mm) Medium 3/8" (9.5 mm) Long 3/8" (9.5 mm) Standard 7/16" (11.1 mm) Long 7/16" (11.1 mm) 1078 Standard 1/2" (12.7 mm) Medium 1/2" (12.7 mm) 1083 Long 1/2" (12.7 mm) Standard 9/16" (14.3 mm) Standard 5/8" (15.9 mm) 1084 Long 5/8" (15.9 mm)
6 PART NUMBERS FOR CAB AND 3.5" (89 mm) Diameter & & & & & & Material --> Galvanized SS Galv. SS Galv /AL Clad Galv/AL /Brass Standard 1/4" (6.4 mm) Medium 1/4" (6.4 mm) 5431 Long 1/4" (6.4 mm) Standard 5/16" (7.9 mm) Standard 3/8" (9.5 mm) Medium 3/8" (9.5 mm) Long 3/8" (9.5 mm) Standard 7/16" (11.1 mm) Long 7/16" (11.1 mm) 7841 Standard 1/2" (12.7 mm) Medium 1/2" (12.7 mm) Long 1/2" (12.7 mm) Standard 9/16" (14.3 mm) Standard 5/8" (15.9 mm) Long 5/8" (15.9 mm)
7 4" (102 mm) Diameter Material --> Galvanized Clad PART NUMBERS FOR CAB AND & SS Galv. SS Galva/AL & & & Galv/AL Standard 1/4" (6.4 mm) Medium 1/4" (6.4 mm) 6544 Long 1/4" (6.4 mm) Standard 5/16" (7.9 mm) Standard 3/8" (9.5 mm) Medium 3/8" (9.5 mm) 6040 Long 3/8" (9.5 mm) Standard 7/16" (11.1 mm) Long 7/16" (11.1 mm) & & /Brass Standard 1/2" (12.7 mm) Medium 1/2" (12.7 mm) 6721 Long 1/2" (12.7 mm) Standard 9/16" (14.3 mm) 1127 Standard 5/8" (15.9 mm) Long 5/8" (15.9 mm) 3713
8 PART NUMBERS FOR CAB AND 4.5" (114 mm) Diameter & & & & & Material --> Galvanized Clad SS Galv. SS Galv/AL Galv/AL /Brass Standard 1/4" (6.4 mm) Medium 1/4" (6.4 mm) Long 1/4" (6.4 mm) Standard 5/16" (7.9 mm) Standard 3/8" (9.5 mm) Medium 3/8" (9.5 mm) Long 3/8" (9.5 mm) Standard 7/16" (11.1 mm) Long 7/16" (11.1 mm) Standard 1/2" (12.7 mm) Medium 1/2" (12.7 mm) 5662 Long 1/2" (12.7 mm) Standard 9/16" (14.3 mm) Standard 5/8" (15.9 mm) Long 5/8" (15.9 mm) 7006 &
9 PART NUMBERS FOR CAB AND 5" (127 mm) Diameter & & & & Material --> Galvanized SS Galv. SS Galv/AL Clad Galv/AL Standard 1/4" (6.4 mm) 1157 Medium 1/4" (6.4 mm) Long 1/4" (6.4 mm) 1158 Standard 5/16" (7.9 mm) & & /Brass Standard 3/8" (9.5 mm) Medium 3/8" (9.5 mm) 5472 Long 3/8" (9.5 mm) Standard 7/16" (11.1 mm) Long 7/16" (11.1 mm) Standard 1/2" (12.7 mm) Medium 1/2" (12.7 mm) Long 1/2" (12.7 mm) Standard 9/16" (14.3 mm) Standard 5/8" (15.9 mm) Long 5/8" (15.9 mm) 1179
10 6" (152 mm) Diameter Material --> Galvanized Clad PART NUMBERS FOR CAB AND SS Galv. SS & Galv/AL & & & Galv/AL & & Standard 1/4" (6.4 mm) 1187 Medium 1/4" (6.4 mm) Long 1/4" (6.4 mm) 1188 Standard 5/16" (7.9 mm) 1189 Standard 3/8" (9.5 mm) Medium 3/8" (9.5 mm) Long 3/8" (9.5 mm) Standard 7/16" (11.1 mm) 1196 Long 7/16" (11.1 mm) 1209 Standard 1/2" (12.7 mm) Medium 1/2" (12.7 mm) Long 1/2" (12.7 mm) Standard 9/16" (14.3 mm) Standard 5/8" (15.9 mm) 1204 Long 5/8" (15.9 mm) 3698
11 PART NUMBERS FOR CAB AND 8" (203 mm) Diameter Material --> Galvanized Clad Stainless Steel & Galv. SS Galv/AL & & & Galv/AL & /Brass & Standard 1/4" (6.4 mm) Medium 1/4" (6.4 mm) Long 1/4" (6.4 mm) Standard 5/16" (7.9 mm) 1211 Standard 3/8" (9.5 mm) 1212 Medium 3/8" (9.5 mm) Long 3/8" (9.5 mm) Standard 7/16" (11.1 mm) 1213 Long 7/16" (11.1 mm) Standard 1/2" (12.7 mm) 1214 Medium 1/2" (12.7 mm) Long 1/2" (12.7 mm) Standard 9/16" (14.3 mm) Standard 5/8" (15.9 mm) 1215 Long 5/8" (15.9 mm)
12 SADDLE ONLY SADDLE ONLY Material --> Aluminum Brass SADDLE ONLY Stainless Steel Diameter 1.5" (38mm) " (51mm) " (64mm) " 76mm) " (89mm) " (102mm) " (114mm) " (127mm) " (152mm)
Detached accessory structures that contain no conditioned floor area are exempt.
RESIDENTIAL ROOFING PERMITS: A roofing permit is required for roofing of residential dwellings and garages in accordance with Section R105 of the International Residential Code. Updated 11/2013 City of
More informationConfidential. Proportional reducer D386 ATEX. Male base connector View from weld side
Proportional reducer D386 ATEX Classification according Article 3.3 of European Directive n 97/23/CE from 29/05/1997 Classification according group II, category 2 and temperature class T4 of ATEX Directive
More information3M Mobile SkyWalk Series Horizontal Lifeline Product Return Form
3M Mobile SkyWalk Series Horizontal Lifeline Product Return Form THIS FULLY COMPLETED DOCUMENT MUST BE INCLUDED WITH EACH RETURN SHIPMENT IN ORDER FOR CREDIT TO BE ISSUED. ALL CREDITS WILL BE ISSUED TO
More informationVandal-proof keypad series
Model No. LBKP35900 / LBKP35900E (Encryption available) Interface: PS2, USB available. Dimensions: 100mm x 91.5mm No. of keys: 16 keys, high quality stainless steel G.W.: 0.75kg. All languages version
More informationSemi-rigid Coaxial Cables
50 Ohm RF Coaxial Cables Semi-rigid Coaxial Cables SR034 SR047/M17 SR086 /M17 SR086-25 SR086-75 SR090-25 SR141 SR141-25 SR141-35 SR141-75 SR250 SR250-75 147 Semi-rigid Coaxial Cabless SR034 Inner conductor
More informationElectro-Magnetic Flowmeters COPA-XT 2-Wire DT43
Data Sheet Electro-Magnetic Flowmeters COPA-XT 2-Wire DT43 2-Wire Operation Significantly reduces installation costs when compared to a traditional 4-wire magmeter. ±0.5% of rate system accuracy. Patented
More informationMaster Anamorphic T1.9/35 mm
T1.9/35 mm backgrounds and a smooth, cinematic look, the 35 Close Focus (2) 0.75 m / 2 6 Magnification Ratio (3) H: 1:32.3, V: 1:16.1 Weight (kg) 2.6 Weight (lbs) 5.7 Entrance Pupil (7) (mm) -179 Entrance
More information[see Figure 3 below] Ferrite tile walls and ceiling RF Absorber parcel walls and ceiling Removable floor section to make fully anechoic
Test Room ID: R21F Description: SEMI ANECHOIC SHIELDED TEST ENCLOSURE Primary Testing Uses: FCC, CE Mark Dimensions: 9.75m x 6.10m x 5.49m (32ft. x 20ft. x 18ft.) [see Figure 3 below] Construction: Galvanized
More information1-Way Bracket Assemblies
-Way Bracket Assemblies The Astro-Brac in its various configurations is a truly universal system for mounting signals. The Astro-Brac is designed to facilitate the mounting of any size or combination of
More informationTypical Aluminum GFM Mass Flow Meter
MASS FLOW METERS Design Features n Rigid metallic construction. n Maximum pressure of 1000 psig (70 bars). n Leak integrity 1 x 10-9 of helium. n NIST traceable certification. n Built-in tiltable LCD readout.
More informationCABLE TRAY. Introduction
Introduction BLE TRAY ICMS cable tray system including Fittings and accessories is manufactured with return flange in a standard length of 2.44Mtr, according to the following specifications and standards:
More informationGuide rail bracket (for adjustable heads)
(for adjustable heads) Part. 209 40 ø,5 ø10,5 2 2,5 115 15 42 5 11 37 72 4 70 Code 209 / 0754 MATERIALS: Bracket made out of reinforced polyamide black colour. FEATURES: To be used with heads Part.221,
More informationHVAC/R GAS TEST GAUGES SPECIFICATIONS ACCURACY CASE SIZES CASE MATERIAL MOUNTING STYLE HOUSING MATERIAL TUBE & SOCKET MOVEMENT RANGES DIAL STANDARD
HVAC/R GAS TEST GAUGE Hex or Bell Type mounting 5 to00 Psi pressure ranges Steel case and brass internals Use to pressure test all new gas installations for leaks and passing inspection codes. After installing
More informationTrunk Cables. www.teletronik.com
Trunk Cables www.teletronik.com Brief Introduction Teletronik TC series coaxial cable was developed to meet the increasing demand of tomorrow's broadband networks. TC series cable has the highest reliability
More informationAvailable Memory 4 GB 8 GB. Product Specifications. Product Material. Weight
Model F-002 A contemporary key shape design makes this model ideal most industries. Available s PMS # Silver : High Impact Plastics with aluminum Alloy surface : 9 Grams Inches: 2.32" x 1.02" x 0.3" Millimeters:
More informationCarton - Straight Link Machine Chain (Order Unit is Feet )
Straight Link Machine Individual chain links shown actual size in reference section page 44. Carton Uses: General utility; farm and animal Standard Material: Low carbon steel Standard Finish: Bright (BRT),
More informationFinal inspections are completed by site visit only. Access to fenced yards shall be planned.
ROOFING RESIDENTIAL BUILDING INSPECTIONS DEPARTMENT www.ci.blaine.mn.us This handout is intended only as a guide and is based in part on the 2015 Minnesota State Building Code, Blaine City ordinances,
More information60.12. Depend-O-Lok FxE Expansion Coupling. System No. Submitted By Spec Sect Para Location Date Approved Date. DEPEND-O-LOK FxE EXPANSION COUPLING
60.1 D-O-L FxE expansion couplings are a bolted, split-sleeve design that provides for expansion and contraction at the coupled joint. These couplings are furnished with restraint rings that, when affixed
More informationMESSENGERS FOR AERIAL CABLE
MESSENGERS FOR AERIAL CABLE COPPERWELD - EHS, 30% CONDUCTIVITY MES(size)CUWELD Size O.D. Stranding Breaking Strength Wgt./Mft. MES1/4CUWELD 1/4".242 7 #12 5,783 lbs. 128 MES5/16CUWELD 5/16".306 7 # 10
More informationDOUBLE STAINLESS STEEL TUBE DTS FIBER OPTIC CABLE FTSF-FSUTS(DTS)
DOUBLE STAINLESS STEEL TUBE DTS FIBER OPTIC CABLE FTSF-FSUTS(DTS) Double Jelly Filled Stainless Steel Tube General Description This document specifies non armour sensing fiber cable with double stainless
More information% ^ ) 0.55 W Low Power Solenoid Valves Aluminum, Brass, or Stainless Steel Bodies 1/4" to 1" NPT. 2/2 3/2 4/2 5/2 5/3 SERIES Low Power
.55 W Solenoid Valves Aluminum, Brass, or Stainless Steel Bodies /" to " NPT / 3/ / 5/ 5/3 Features Molded one-piece solenoid with highly efficient solenoid cartridge and.55 W low wattage coil Standard
More informationCat. No. Finishes & Materials. Standard Finish: Electrogalvanized. Change suffix to SS6(C).
Superstrut Support Systems 1-5/8 in. x 1-5/8 in. Channel and Hardware Superstrut 1-5/8 in. x 1-5/8 in. - 12 Gauge Channel Type A Solid Base Punched Description Solid base -P Punched -HS Half slots Half
More informationItem No. Name of Part Item No. Name of Part Item No. Name of Part
www.cranepumps.com Parts for Fig. 4001 Bulletin Item No. Name of Part Item No. Name of Part Item No. Name of Part 1 2 6 9 11 *13 *16 17 *18 19 24 *29 32 37 40 46 Casing Impeller Pump Shaft Suction Cover
More informationFlamco Stainless steel mountings
S TA I N L E S S S T E E L M O U N T I N G S 9 Flamco Stainless steel mountings BRS-A BSF - SS RAIL R - SS GP - SS Edition 2007 / UK Stainless steel mountings Flamco offers the best attachment options
More informationPUSH-PULL CABLES CONTROL SYSTEMS
ISO 9001 CERTIFIED PUSH-PULL CABLES CONTROL SYSTEMS WESCON PRODUCTS COMPANY A subsidiary of LATSHAW ENTERPRISES, INC. WESCON'S PUSH-PULL CONTROL SYSTEMS Push-Pull Cable Ends Wescon Push-Pull Cable Assemblies
More informationNEGRP TEST SUMMARY. Joseph A. Lanzoni, November 2005
NEGRP TEST SUMMARY Joseph A. Lanzoni, November 2005 The National Electrical Grounding Research Project (NEGRP) was a project managed and sponsored by the National Fire Protection Association (NFPA) Research
More informationThe Augustus Group Products Projects and Engineering Consulting. ASME BOILER AND PRESSURE VESSEL CODE Mike Looram
The Augustus Group Products Projects and Engineering Consulting ASME BOILER AND PRESSURE VESSEL CODE Mike Looram ASME B&PV CODE SECTION VIII DIV. 1 Bolted Flanges With Ring Type Gaskets Stress Calculations
More informationELECTRIC KNIFE SHARPENER
PRODUCT MANUAL- M109 MODEL 401 ELECTRIC KNIFE SHARPENER Please read thoroughly before operation and keep for future reference Model 401 Knife Sharpener Specifications Model No. #401 Power Requirements
More informationTaps up to M20 [3/4"] Multiple tap applications Taps up to 150 strokes per minute Taps millions of parts with little maintenance
www.danly.com TRUSTED SOLUTIONS AND INNOVATION Max Control TM Servo-Drive In-Die Tapping Units Taps up to M20 [3/4"] Multiple tap applications Taps up to 150 strokes per minute Taps millions of parts with
More informationred-y smart series product information Thermal Mass Flow Meters and Controllers for Gases
red-y smart series product information Thermal Mass Flow Meters and Controllers for Gases Reliable and accurate: Thermal Mass Flow Meters and Controllers Reliable technology and industry standard interfaces
More informationEXHIBIT "A. Technical Specifications for Water and Sewer Service Lines
EXHIBIT "A Technical Specifications for Water and Sewer Service Lines Water and Sewer Line Bedding and Backfill: Drawings show cross-section of trench, pipe laid on top of 6" min. bedding material, bedding
More informationPressure and Temperature Controls
Pressure and Controls Pressure Reducing Armstrong pressure reducing valves (PRVs) and temperature regulators help you manage steam, air and liquid systems safely and efficiently. And assure uninterrupted
More informationTY-FLO Needle Valves
Design/Features Hard (Vee) or Delrin Soft Seat/Tip Orifice sizes from.17 to.438 in. Flow Coefficients (C V ) from.37 to.7 Straight or angle flow patterns Optional panel mount Handle options available Non-wetted
More informationdb MISER ULTRA LOW LOSS CABLE ASSEMBLIES Are you a design or test engineer fighting a challenging loss budget?
db MISER ULTRA LOW LOSS ASSEMBLIES Are you a design or test engineer fighting a challenging loss budget? Consider db Miser ultra low loss cable assemblies. High performance materials, careful attention
More informationTFC/U-JIN Coaxial Cable Product Information Sheet Type: TU6T60-JVB
Type: TU6T60-JVB Dielectric 2nd Outer (w/optional Floodant) Series 6 Coaxial Cable Copper Clad Steel Foamed Polyethylene Dielectric Bonded AP Laminate Shield 60% Aluminum Braid "Life Time" compound AP
More informationCRANE. Σελίδα 1 από 2. Dimensions and Weights. Weight (kg) Size
CRANE Σελίδα από 2 DM93 Variable Orifice Double Regulating Valve PN6 Cast Iron Balancing Valve (VODRV), Flanged to BSEN 92-2 The DM93 variable orifice double regulating valves will give satisfactory performance
More informationElectroShade Skylight, Atrium and Monumental Shades
ElectroShade Skylight, Atrium and Monumental Shades Flat Horizontal Double Motor Soft Fold Top Down Gravity Drop Flat Triangular Double Motor Bottom Up Flat Top Down Gravity Drop Soft Fold Single Motor
More informationTMC CableReady Connectors For Jacketed Metal Clad Cable TMC For Non-Hazardous Locations
TMC CableReady Connectors For Jacketed Metal Clad Cable TMC For Non-Hazardous Locations CableReady connectors are designed for use with the following cables: Type MC jacketed corrugated aluminum, interlocked
More informationMTI10 Insertion and MTL10 In-line Thermal Mass Flowmeter and Temperature Transmitter
Thermal Mass meter and Temperature Transmitter Description The MTI10 insertion thermal mass flowmeter and the MTL10 in-line thermal mass flowmeter provide accurate mass flow measurement of clean, dry gases
More informationNEW CONNECTION INDUSTRIAL PRODUCTS NC.10V NC.20V NC.30V. NC. SD.10 NC. SD.20 NC. F.Clamp
Repair and Construction. Complete stainless steel pipe repair clamps to repair cracks, fractures, pin holes, torn sockets or welded tees, broken asbest-cement pipe coupling and more. Available for all
More informationF-Series Camera Mounting Accessories
F-Series Camera Mounting Accessories Document Number: 427-0462-00-12 Version: 100 Issue Date: September 2010 2010. All rights reserved worldwide. FLIR Commercial Systems, Inc. 70 Castilian Drive Goleta,
More informationZA-12. Temperature - Liquidus + 45 o C (81 o C) Vacuum = 90mm
Ragonne Fluidity, Inches Zn-Al Impact 38 34 30 26 22 18 14 No. 3 Zn-Al ZA-8 Liquidius ZA-12 Temperature - Liquidus + 45 o C (81 o C) Vacuum = 90mm Zn-Al (0.01-0.02 percent mg) ZA-27 10 0 2 4 6 8 10 12
More informationQUANTIFYING SOLAR ENERGY
www.sustainicum.at QUANTIFYING SOLAR ENERGY Recommendations for implementation in the course Author: E-Mail address: Institution: Philipp Weihs weihs@mail.boku.ac.at BOKU Important considerations Very
More informationNow Available through:
Now Available through: Adhesive- Mount s s Perma Dome Packages Perma Plate Packages Mini Plate Packages Convenience. Support. Security. The PC Guardian ADVANTAGE Flexible and expandable adhesive-mount
More information- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL 301 - DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING 401
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 70 204 PERFORMANCE CURVE 90 205 PERFORMANCE CURVE 120 206 PERFORMANCE CURVE 200 207 - CONSTRUCTIONS
More informationThe MC Cable Revolution is Gaining Ground REMKE
The MC Cable Revolution is Gaining Ground June 2014 MC Cable Installation Continues to Improve with Advances in Materials and Fittings As the use of Metal Clad Cable grows, contractors are demanding better
More informationElectromagnetic Flow Meter
Electromagnetic Flow Meter Description The EL 2200 series of electromagnetic sensors represent the state of the art for the accurate measurement for water cycle and process applications. Flow meters are
More informationHose Clamps & Fittings
All Stainless Steel Marine or Underground Hose Clamps 5/16 HEX HEAD SCREW 60000 SERIES Highly corrosion resistant Use for marine or underground applications Stainless Steel Band, Housing Plated Steel Screw
More informationCable Accessories. for Extruded Dielectric Cable 69kV - 230kV Rated. Catalog Python13
Cable Accessories for Extruded Dielectric Cable 69kV - 230kV Rated Components used in cable systems 100% Tested Factory Molded For outdoor applications through 230kV For gas insulated substations and transformers
More informationREADY. SET AND RESET. www.wordlock.com STRONG, SECURE, EASY-TO-REMEMBER #1 SELLING WORD COMBINATION LOCK
READY. SET AND RESET. www.wordlock.com STRONG, SECURE, EASY-TO-REMEMBER #1 SELLING WORD COMBINATION LOCK The Original #1 Selling Word Combination Locks Scientific studies have shown that words are much
More informationTechCut 4 Precision Low Speed Saw
Product Brochure TechCut 4 Precision Low Speed Saw 3" - 6" Blade Range Digital Speed Display 1-Micron Sample Indexing Spring-Loaded Dressing Stick Attachment All Aluminum & Stainless Steel Construction
More informationTensioning, Winding and Unwinding
General Winding is the process of taking up a web or a strand of a long length of material onto a beam, a cone, a core, a drum or a spool; primarily for handling convenience for end use or reprocessing.
More informationSolenoid Valve Type 3962
Solenoid Valve Type 362 x d, x em or without explosion protection, for controlling pneumatic actuators General The Type 362 Solenoid Valve ensures a high level of operational reliability for controlling
More informationTimes Microwave Systems Hermetically Sealed Assemblies
SCOPE This Specification details the Electrical, Mechanical and Environmental Characteristics of Times Microwave Systems MILTECH 340.34 Diameter Hermetically Sealed Coaxial Transmission Lines. This product
More informationANTENNA PARTS CATALOG
ANTENNA PARTS CATALOG Maco Antennas 302 S. East St. Mt. Carroll, IL 61053 www.macoantennas.net 815-244-3500 www.antennapartsoutlet.com SCREWS / BOLTS PART SIZE LENGTH DESCRIPTION PRICE S21 10-24 1/2" Machine
More informationGUY-GRIP Dead-end NOMENCLATURE GENERAL INFORMATION SAFETY CONSIDERATIONS 19-2. (440) 461-5200 inquiries@preformed.com www.preformed.
GUY-GRIP Dead-end NOMENCLATURE Cross-over Marks*: (A) Indicate starting point for application on smaller diameter fittings described on the reverse side of this page. (B) Indicates alternate starting point
More informationContents and Nomenclature
DX Coils Contents and Nomenclature Nomenclature... 1 Evaporator Coil Types EN... 2 EF... 2 ER... 2 EJ... 3 EK... 3 Evaporator Construction Connections... 4 Tubing... 4 Headers... 5 Tube Supports... 5 Coil
More informationBERMAD Waterworks. Surge Anticipating Control Valve. 700 Series. Model 735-M. Features and Benefits. Major Additional Features
Surge Anticipating Control Valve Eliminates surge in all pumping systems: Booster & deep well, single & variable speed Eliminates surge in all distribution networks: Municipal, high-rise buildings, sewage,
More informationBERMAD Waterworks. Pressure Relief/Sustaining Valve. 700 Series. Model 730. Features and Benefits. Major Additional Features
Pressure Relief/Sustaining Valve Prioritizing pressure zones Ensuring controlled pipeline fill-up Preventing pipeline emptying Pump overload & cavitation protection Safeguarding pump minimum flow Excessive
More informationSports and High Mast Lighting Poles Phone: (866) 474-7200 Fax: (817) 924-7049
Sports and High Mast Lighting Poles 4 High Mast Lighting Poles General American LitePole offers a raising and lowering system that allows for ease of maintaining the lighting system at ground level. Ideal
More informationInstallation Instructions for Contractors. Connection Sets. Solar Twin Tube. Inox 1/2" Inox 3/4" 6 720 646 309 (2011/02) US/CA
Installation Instructions for Contractors Connection Sets Solar Twin Tube Inox 1/2" Inox 3/4" 6 720 646 309 (2011/02) US/CA Contents Contents 1 Explanation of symbols and safety information 3 1.1 Explanation
More informationSingle sub-base valve
solenoid valves Mini-valves 10 mm Electrical connection... Mounting... Port sizes... Rated temperature... Fluid... Working pressure... Nominal flow... Pneumatic connections Voltage... Power... NC poppet
More informationMetric Composite Push-In Fittings
Metric Composite Push-In Fittings Version 2013 1.0 3058 Ranchview Lane North. Plymouth, MN 55447 Polyconn now offers a Metric fitting composite line to complement our inch composite fittings. They can
More informationCable Plug acc. to DIN EN 175301-803, Form A
Cable Plug acc. to DIN EN 175301-803, Form A Complete program Contact form 18 mm Also available with LED indicator Optional 4-pin version for pressure switch or impulse valves respectively Versions with
More informationEHV CONNECTORS EHV TERMINALS ACFS (EHV)... ALUMINUM BOLTED TUBE TO FLAT PAD, SHORT...EHV-7
CONNECTORS TERMINALS ACF ()... BOLTED TUBE TO FLAT PAD...- ACFS ()... BOLTED TUBE TO FLAT PAD, SHORT...-7 CCL-... COMPRESSION TUBE TO FLAT PAD...- CCLS-... COMPRESSION TUBE TO FLAT PAD, SHORT... - EVKET...
More informationDescription. Specifications and Ordering Information 330400 and 330425 Accelerometer Acceleration Transducers
Specifications and Ordering Information 330400 and 330425 Accelerometer Acceleration Transducers R Description These accelerometers are intended for critical machinery applications where casing acceleration
More informationCable Trays Technical Instructions & Specifications
Cable Trays Technical Instructions & Specifications Products Catalogue Objective and Structure The company s main objective is the supply of quality products, with respect to: practical design increased
More informationHIGH POWER FREE SPACE AND FIBER PIGTAILED ISOLATORS
NEW HIGH POWER FREE SPACE AND FIBER PIGTAILED ISOLATORS Features: New! Reduced size and cost versions Reliable high power handling: As much as 80 Watts High Isolation, up to 50dB isolation possible from
More informationTEST REPORT. Rendered to: TFC A DIVISION OF CENTURION INDUSTRIES, INC. Garrett, Indiana
Architectural Testing TEST REPORT Report No.: D0162.02-201-44 Rendered to: TFC A DIVISION OF CENTURION INDUSTRIES, INC. Garrett, Indiana PRODUCT TYPE: Pressure Equalized Rainscreen SERIES/MODEL: 4 mm Composite
More informationElectronic Wallmount Faucet 1500T4 & 1501T4 Series
Electronic Wallmount Faucet 1500T4 & 1501T4 Series Specification: (example) Battery (4 C cell) or Hardwire (24 VAC) infrared electronic handwash system H 2OPTICS technology no external adjustments required
More informationGENUINE METARIS HYDRAULIC TANKS
GENUINE METARIS HYDRAULIC TANKS Product Listing A B C D E F G H I A MPN098708 50 gal. Polyethylene Upright Tank B MPN098709 50 gal. Steel Upright Tank C MPN098712 50 gal. Aluminum Upright Tank D MPN099312
More informationDITZLER VULKAN DR-1000/DR-1900. Plastic welding equipment
DITZLER VULKAN Plastic welding equipment DR-1000/DR-1900 > Ultra light and slim > Very easy to use > Powerful, even in confined spaces > Double protective insulation for safety > None of the apparatus
More informationTrade of Electrician. Three-phase Distribution Boards And Socket Circuits
Trade of Electrician Standards Based Apprenticeship Three-phase Distribution Boards And Socket Circuits Phase 2 Module No. 2.3 Unit No. 2.3.2 COURSE NOTES Created by Charlie Walsh - Athlone TC Revision
More informationA Table of the Most Common Standard Pipe Sizes. Nominal Bore 1/2 inch (DN 15 mm), Outside Diameter 21.34 mm
Standard Pipe Sizes Standard Pipe Sizes Except for specialist applications, commercially available pipe comes in standard sizes. Pipes in a variety of materials - including carbon steel, steel alloys,
More informationMagnum Magnetizers. Print Magnum's magnet media on your digital press and magnetize post press with Magnum Magnetics magnetizer.
Magnum Magnetizers Print Magnum's magnet media on your digital press and magnetize post press with Magnum Magnetics magnetizer. In-Line Magnetizers In-line Magnetization Magnum Magnetics, The Force in
More informationFLOAT SWITCHES FLOW SWITCHES FOR LIQUIDS PRESSURE SWITCHES
01D351-GB FLOAT SWITCHES FLOW SWITCHES FOR LIQUIDS PRESSURE SWITCHES DOLOMIT FLOAT SWITCHES The DOLOMIT float switches find application in liquid level control in tanks and wells; they require connection
More informationDSM http://www.dsmmfg.com 1 (800) 886-6376
DESIGN GUIDE FOR BENT SHEET METAL This guide discusses how the bends are made, what thicknesses of sheet metal are commonly used, recommended bend radius to use when modeling the part, some practical limits
More informationRSS Series Wired Electronic Ballasts
RSS Series Wired s Specifications Charts RSS Series Electronic Sign Ballasts Minimum starting temperature is -20 F (-30 C). For use with T12 HO, T8 HO, and Slimline 120 Volts, 50/60Hz RSS Installation
More informationRTD Temperature Probe for the Food/Pharmaceutical Industry
sales@jumo.co.uk Data Sheet 902810 Page 1/9 RTD Temperature Probe for the Food/Pharmaceutical Industry For temperatures between -50 and +250 C Protection type up to IP69 according to DIN EN 60529 (IP69K
More informationNordson Automatic Spray Gun Support Kits
Nordson Automatic Spray Gun Support Kits Customer Product Manual Issued / For parts and technical support, call the Finishing Customer Support Center at (800) -99. This document is subject to change without
More informationUni-Quick Duct System. Moveable. Uni-Quick. Duct System. DUST COLLECTION and MATERIAL HANDLING APPLICATIONS a McGill AirFlow product
United McGill products Uni-Quick TM An enterprise of United McGill Corporation Family owned and operated since 1951 Moveable Duct System DUST COLLECTION and MATERIAL HANDLING APPLICATIONS a McGill AirFlow
More informationGeberit Mapress Catalogue 2008 / 2009. Valid from 1 April 2008
Geberit Mapress Catalogue 2008 / 2009 Vali from 1 April 2008 Mapress Stainless Steel Page 3 Mapress CrNi Steel Page 23 Mapress Stainless Steel silicone-free Page 25 Mapress Stainless Steel Gas Page 39
More informationGRATES AND DRAINS HOUSTON ORLANDO GREENVILLE 800/392-5066 800/327-3022 800/476-2212 TOTAL MAINTENANCE SOLUTIONS
15-1 CLEANOUT COVERS 47471082 4-11/16 Josam, 3 screw 47471084 6-5/16 Josam, 3 screw 47761070 5-7/16 Smith, 3 screw w/ closure plug 47941108 6-1/4 Wade, 3 screw 47991400 4-5/8 Zurn, 3 screw 47991402 6-1/8
More informationFLANGED. LOW CARBON STEEL C -..23% max. P - 0.04% max. Mn -.090% max. S - 0.05% max. 50,000 psi (min.)
CD S FLANGED 4-40.187.250 6-32.218.250 8-32.250.250 10-32.250.250 10-24.250.250 1/4-20.312.375 5/16.375.500 3/8-16.437.500 ORDER CODE: CDF CD S FLANGED METRIC M2.5 X.45 3.1 6 M3 X.50 4.5 6 M4 X.70 5.5
More informationOVERALL CONVEYOR WIDTH STEEL ALUMINUM MODEL # PER FT. 10 FT. 5 FT. PER FT. 10 FT. 5 FT. PER FT. 10 FT. 5 FT. PER FT. 10 FT. 5 FT.
Pick Smarter. Pick Better. Pick UNEX. Skatewheel (SW) Skatewheel Gravity Conveyor is ideally suited to convey lightweight packages and where operations require portable or temporary conveyor lines such
More informationDesign collection. 12 Volt Outdoor Lighting
Design collection 12 Volt Outdoor Lighting The next generation by innovation Besides the existing 12 volt lighting concept Garden Lights, Techmar BV brings a design collection on the market. It is specially
More informationDRESSER TM PIPELINE SOLUTIONS
Wal-Rich Corporation is a master distributor of Dresser Pipeline Solutions, a trademark of GE. The following pages highlight the items that are in stock at our NY facility. For more information, please
More informationSafety at a high level!
SIKA Level Switch SIKA Level Switch Safety at a high level! Convincing Advantages easy and reliable method to monitor fluid levels proven float principle easy side installation using threads ¾" or ½" BSP
More informationMAST ARMS & POLES. Ornamental Pole Top & Bases
Ornamental Pole Top & Bases Pelco s decorative pole top and bases help make the traffic signal aesthetically pleasing to the eye. Available for various pole diameters and multiple finish options. Ornamental
More informationHeating Cable. Construction
Mineral Insulated High Temperature A C Constant Wattage Series Resistance Heating Cable Sets Process Temperature Maintenance to F (593 C) Maximum Exposure Temperature 4 F (76 C) (Power Off) Corrosion Resistant
More informationEHV SUBSTATION END BELLS
EHV SUBSTATION END BELLS EHV BOLTED END BELLS FOR TUBE TYPE HVTEB/EVTEB Aluminum alloy tubular end bells are corona free at 35 and 500 KV levels respectively. The spheres are finished free of nicks, burrs
More informationROOF DRAINS TABLE OF CONTENTS
Pictorial Index Product Recommendations Roof Drain Selection Factors Sizing Placement Material & Characteristics Pipe Connection Commonly Specified Options Typical Installations TABLE OF CONTENTS ROOF
More informationTerminal Boxes in Glass Fiber Reinforced Polyester (GRP)
Features Variants options Glass fiber reinforced polyester (GRP) enclosures Suitable for installation in Zones 0, 1, 2, 21 and 22 Certified Ex e, Ex ia and Ex tb 16 enclosure size options Various terminal
More informationQuick Disconnect. Wiring diagrams show quick. Male Receptacle End View Blue. disconnect pin numbers ( ) 1 Brown. Load. 4 1 Black ( ) 3 Blue ( ) Brown
Pile Driver Sensor One-piece stainless steel cylindrical housing 2-wire DC 3-wire DC 2-wire AC/DC 1. to sensing range dia. model: The Die Guy TM Rugged Solid stainless steel housing withstands abusive
More informationPerfection Spring & Stamping Corp. 1449 E. Algonquin Rd. Mount Prospect, IL 60056 USA www.pss-corp.com 411@pss-corp.com
Perfection Spring & Stamping Corp. 1449 E. Algonquin Rd. Mount Prospect, IL 60056 USA www.pss-corp.com 411@pss-corp.com Raw Material Type, Alloy, & Finishes By Manufacturing Method 1. Punch Press Department
More informationPLATE HEAT EXCHANGER. Installation Manual. Customer Name: Serial number: Purchase order number: Project:
PLATE HEAT EXCHANGER Installation Manual Customer Name: Serial number: Purchase order number: Project: Table of Contents ----------------------------------------------------------------- Page: 2 3 Name
More informationOEM Pressure Transmitters for heavy-duty applications, Type MBS 1200 and MBS 1250
MAKING MODERN LIVING POSSIBLE Data sheet OEM Pressure Transmitters for heavy-duty applications, Type MBS 1200 and MBS 1250 The compact OEM pressure transmitter programme is designed for use in severe hydraulic
More informationCEEN 162 - Geotechnical Engineering Laboratory Session 7 - Direct Shear and Unconfined Compression Tests
PURPOSE: The parameters of the shear strength relationship provide a means of evaluating the load carrying capacity of soils, stability of slopes, and pile capacity. The direct shear test is one of the
More information