Hyperion Enterprise. Installation Guide RELEASE

Transcription

1 Hyperion Enterprise Instaation Guide RELEASE

2 Hyperion Enterprise Instaation Guide, Copyright 1991, 2012, Orace and/or its affiiates. A rights reserved. Authors: EPM Information Deveopment Team Orace and Java are registered trademarks of Orace and/or its affiiates. Other names may be trademarks of their respective owners This software and reated documentation are provided under a icense agreement containing restrictions on use and discosure and are protected by inteectua property aws. Except as expressy permitted in your icense agreement or aowed by aw, you may not use, copy, reproduce, transate, broadcast, modify, icense, transmit, distribute, exhibit, perform, pubish, or dispay any part, in any form, or by any means. Reverse engineering, disassemby, or decompiation of this software, uness required by aw for interoperabiity, is prohibited. The information contained herein is subject to change without notice and is not warranted to be error-free. If you find any errors, pease report them to us in writing. If this is software or reated documentation that is deivered to the U.S. Government or anyone icensing it on behaf of the U.S. Government, the foowing notice is appicabe: U.S. GOVERNMENT RIGHTS: Programs, software, databases, and reated documentation and technica data deivered to U.S. Government customers are "commercia computer software" or "commercia technica data" pursuant to the appicabe Federa Acquisition Reguation and agency-specific suppementa reguations. As such, the use, dupication, discosure, modification, and adaptation sha be subject to the restrictions and icense terms set forth in the appicabe Government contract, and, to the extent appicabe by the terms of the Government contract, the additiona rights set forth in FAR , Commercia Computer Software License (December 2007). Orace America, Inc., 500 Orace Parkway, Redwood City, CA This software or hardware is deveoped for genera use in a variety of information management appications. It is not deveoped or intended for use in any inherenty dangerous appications, incuding appications that may create a risk of persona injury. If you use this software or hardware in dangerous appications, then you sha be responsibe to take a appropriate fai-safe, backup, redundancy, and other measures to ensure its safe use. Orace Corporation and its affiiates discaim any iabiity for any damages caused by use of this software or hardware in dangerous appications. This software or hardware and documentation may provide access to or information on content, products, and services from third parties. Orace Corporation and its affiiates are not responsibe for and expressy discaim a warranties of any kind with respect to third-party content, products, and services. Orace Corporation and its affiiates wi not be responsibe for any oss, costs, or damages incurred due to your access to or use of third-party content, products, or services.

3 Contents Documentation Accessibiity... 9 Chapter 1. Instaation Overview Introduction Components Chapter 2. Panning the Instaation System Requirements Windows Cient Workstation Requirements Fie Server Requirements (Without Data Server) Fie Server Requirements (With Data Server) Hyperion Enterprise Web Cient Hyperion Enterprise Web Server Appication Server Requirements for Hyperion Enterprise Message Server Requirements for Hyperion Enterprise Hyperion Enterprise Smart View Provider Requirements Prerequisites Additiona Prerequisites Hyperion Enterprise Appication Server Using Hyperion Enterprise Appication Server on Windows or 64-bit Statutory Consoidation Engine Hyperion Enterprise Servers Hyperion Enterprise Web Server Hyperion Enterprise Smart View Provider Components and Their Directories Instaation Tasks Compatibe Products Port Numbers Used by Hyperion Products Chapter 3. Quick Insta and Sient Mode Instaation Instaation Methods Performing a Quick Insta Sient Instaation Contents iii

4 Performing a Sient Mode Instaation Driver Count Settings Chapter 4. Instaing Hyperion Enterprise Setup Options Performing a Compete Instaation Beginning a Compete Instaation Setting Up Server Components Instaing Common Security Services (CSS) Finishing a Compete Instaation Performing a Workstation Setup Instaation Verifying Your Path Driver Count Setting Chapter 5. Additiona Instaation Procedures Setting Up Hyperion Retrieve Setting Up Hyperion Retrieve for Microsoft Exce Creating a Customized Setup Program Instaing Hyperion Enterprise Using the Customized Setup Program Configuring Hyperion Enterprise Web Server Prerequisites Configuring the Hyperion Enterprise Web Appication Disabing Access to Hyperion Enterprise Web Appications About Hyperion Home Changing the Hyperion Home Location Chapter 6. Converting Your Appication to Hyperion Enterprise Reease Feature Comparison with Hyperion Enterprise SE Reease 4.x Compatibiity of Earier Hyperion Enterprise SE and Hyperion Enterprise Reeases Performing Eiminations When Substructures are Used Assigning Formuas to Subaccounts by Equating Major Accounts Cacuating Formuas Entering Intercompany Transactions Tracking Acquired and Disposed Dates Universa Naming Convention System Load Fie Behavior Requirements Comparison with Hyperion Enterprise SE Hyperion Enterprise SE Architecture Hyperion Enterprise Reease Architecture iv Contents

5 Hyperion Enterprise Conversion Utiities Converting Appications Appication Conversion 4.7 Through to Conversion Utiity Appication Conversion from SE to Conversion Utiity Hyperion Enterprise SE System Extract and Logic Conversion Utiities Instaing the Conversion Utiities Appication Conversion 4.7 Through to Conversion Utiity Hyperion Enterprise XA Conversion Considerations Converting a Hyperion Enterprise Reease 4.7 Through Reease Appication to Reease Appication Conversion SE to Hyperion Enterprise Conversion Utiity Before You Convert Gathering Data to Test Your Conversion Converting Hyperion Enterprise SE Appications to Hyperion Enterprise Reease Postconversion Tasks and Considerations System Extract and Logic Conversion Utiities Appication Load Fie Conversion Considerations Converting System Extract and Load Fies Loading Converted System Fies Converting Logic Fies Resetting Your Dynamic Account List Criteria Setting Your Point of View in Hyperion Enterprise Chapter 7. Uninstaing Hyperion Enterprise Uninstaing Hyperion Enterprise Chapter 8. Upgrading Hyperion Enterprise Upgrading Methods Upgrading by Instaing Upgrading by Modifying Upgrading by Repairing Appendix A. Manua Configuration of Web Environment Instaing and Configuring Microsoft IIS Verifying the IIS Instaation Prerequisites for configuring IIS Checking IIS Configuration Performance Tuning Contents v

6 Appendix B. Hyperion Enterprise Documentation Browser-Based Hep for Hyperion Enterprise Windows 32 bit cient and Web Accessing Browser-Based Hep for Hyperion Enterprise Windows 32 bit cient Accessing Browser-Based Hep Viewing and Printing PDF Fies PDF Fies for Hyperion Enterprise Appendix C. Program Fies Inventory Windows System Fies Windows Registry Fies Windows Crysta Fies Windows Crescent Fies Appendix D. Product Inventory Hyperion Enterprise Hyperion Enterprise API Reference Guide Hyperion Aocations Hyperion LedgerLink Statutory Consoidation Engine (SCE) Hyperion Retrieve Hyperion AutoPiot Appication Conversion SE to Conversion Wizard Appication Conversion 4.7 Through to Load Fie Conversion Utiity Logic Fie Conversion Utiity Hyperion Home Migration Utiity Appendix E. Ports About Defaut Ports Shared Services Ports Essbase System 9 Ports Essbase Ports Administration Services Ports Provider Services Ports Smart Search Command Line Utiity Ports Reporting and Anaysis Ports Foundation Ports Financia Reporting Ports Interactive Reporting Ports Web Anaysis Ports vi Contents

7 EPM Workspace Ports Appication Buider for J2EE Ports Appication Buider for.net Ports Financia Performance Management Appications Ports Financia Management Ports Performance Scorecard Ports Panning Ports Strategic Finance Ports Performance Management Architect Ports Data Management Ports Data Integration Management Ports Transation Manager Ports FDM Ports Data Reationship Management Ports Index Contents vii

8 viii Contents

9 Documentation Accessibiity For information about Orace's commitment to accessibiity, visit the Orace Accessibiity Program website at Access to Orace Support Orace customers have access to eectronic support through My Orace Support. For information, visit or visit ctx=acc&id=trs if you are hearing impaired. 9

10 10 Documentation Accessibiity

11 1 Instaation Overview In This Chapter Introduction...11 Components...11 Introduction Orace's Hyperion Enterprise is an advanced management, reporting, and consoidation system. This guide describes the hardware and software requirements and instaation procedures for instaing Hyperion Enterprise. Hyperion Enterprise handes a wide range of financia management tasks in a graphica, userfriendy environment. You can use Hyperion Enterprise to coect, consoidate, anayze, and report on business and financia information. With Hyperion Enterprise, your fie-based appications can be Web-enabed, giving users access to an appication onsite or at a remote site using the Internet or an intranet. The system administrator contros which appications are Webenabed. Externa authentication may be used to configure users in Hyperion Enterprise. You can use any or a of the foowing authentication types: Microsoft Windows NT LAN Manager (NTLM), Lightweight Directory Access Protoco (LDAP), or Microsoft Active Directory (MSAD). Information about the seected authentication service is configured by the administrator after the instaation. Mutipe providers may be added, if required. For further information about externa authentication and singe sign-on, see chapter Configuring Externa Authentication in the Hyperion Enterprise Administrator s Guide. Components The Hyperion Enterprise instaation program instas the foowing products, based on the options that you seect: Hyperion Enterprise Reease Externa Security Services Hyperion Statutory Consoidation Engine Hyperion Enterprise Appication Server Hyperion Enterprise Data Server Introduction 11

12 Hyperion Enterprise Web Server Hyperion Enterprise Conversion Utiities Hyperion Aocations Hyperion AutoPiot TM Hyperion LedgerLink Hyperion Message Server Hyperion SmartView provider Hyperion Enterprise Extraction Utiity For information about the enhancements and considerations for this reease of Hyperion Enterprise, see the Hyperion Enterprise Reease Readme document. Note: If you have Hyperion Enterprise reease or earier instaed on your system, you shoud uninsta the previous versions as outined in Chapter 7, Uninstaing Hyperion Enterprise. Hyperion Enterprise reease supports upgrade instaation of reease or higher. 12 Instaation Overview

13 2 Panning the Instaation In This Chapter System Requirements...13 Prerequisites...19 Additiona Prerequisites...21 Port Numbers Used by Hyperion Products...27 System Requirements This section provides configuration requirements and recommendations for the Hyperion Enterprise Reease cient workstation, Web server, fie server, database, appication server, and message server. The foowing specifications cover Hyperion Enterprise Reease software and reated appications ony. Your particuar instaation might need additiona memory, space, and processing capabiities, depending on the requirements of your operating system and any other software you might be running. Windows Cient Workstation Requirements Tabe 1 ists configuration requirements and recommendations for a Hyperion Enterprise Reease cient workstation. The size and compexity of your appications may impact the workstation requirements. Tabe 1 Cient Workstation Requirements Component Requirements Processor Minimum - Pentium 200 Recommended - Pentium 500 or faster Memory Minimum MB Recommended - 1 GB or greater, particuary for system administration Disk space 10 MB if system fies and appication data reside on a fie server (recommended) 75 MB, pus space for appication data as needed, if system and data fies reside ocay System Requirements 13

14 Component Operating systems Web browsers Requirements Operating System for Both 32-bit and 64-bit. Windows XP Professiona (with Service Pack 3) Windows Vista Windows 7 Web browsers 32-bit: Internet Exporer 6.0, 7.0, and 8.0. FireFox 3.5.x and 3.6.x Web browsers 64-bit: Internet Exporer 7.0 Internet Exporer 8.0 RAM (cient) and swap fie RAM MB minimum Swap fie Up to 2.5 times the size of physica memory if required. Note: Refer to the Microsoft documentation for exact figures and additiona information. Spreadsheet add-ins Microsoft Exce XP, 2003, 2007, or 2010 Note: A spreadsheet add-ins are ony supported in 32-bit. Monitors and other peripheras Minimum - SVGA 1024 x 768 resoution Coor Settings 16 bit (High Coor), or preferaby 24 bit (True Coor) Network connection Hyperion Enterprise Reease Fie-Based: Use whatever protoco is necessary to support your network fie server. We recommend using a singe protoco. Database connectivity Hyperion Enterprise Reease Fie-Based: Not appicabe Paging fie size Configure for the cient operating system as recommended by Microsoft Corporation. Database Orace Orace 11g (Fusion) SQL Server 2005 and 2008 These database are used ony to record event ogs. Essbase E*S 7.1.x to System 9 Runtime Cient 7.1.x to System 9 The disk space requirement for a compete instaation assumes that you insta the components seected by defaut by the setup program. Changing the defaut seections changes the amount of disk space required. For more information on the defaut setup seections, see Performing a Compete Instaation on page 33. The disk space requirement for a workstation instaation refects the tota size of Windows system fies that are copied to your system. 14 Panning the Instaation

15 Fie Server Requirements (Without Data Server) Tabe 2 ists configuration requirements and recommendations for a Hyperion Enterprise Reease fie server. Tabe 2 Fie Server Requirements Component Processor Requirement Pentium II - IV (500 MHz or faster) Memory Minimum MB Recommended - 1 GB or more Nove Netware Version 4.12, 5.x, or ater Disk space Minimum MB Typica range: 100 to 500 MB, depending on the size of the appications, incuding system fies System fies: 75 MB, incuding a add-on modues Operating systems Server Operating System 32-bit Windows 2003 Server Service Pack 2 (Standard, Enterprise and Web Edition) Windows 2003 R2 Server Service Pack 2 Windows 2008 Server Service Pack 1 Must provide fie service support to the cient workstation. Server Operation System 64-bit (x64 based Ony) Windows 2003 Server Service Pack 2 x64 Windows 2008 Server Service Pack 1 x64 Windows 2008 R2 Server Dedicated fie server Network communications software Wide area networks Not required. Windows 2003 Server (with Service Pack 2) Windows 2008 Server (with Service Pack 1) Hyperion Enterprise Reease is best used in a distributed environment, and thus arge wide area network (WAN) performance decreases. To improve performance, use Citrix Presentation server, Hyperion Enterprise Web Server, or Hyperion Enterprise Reporting - Web Server, which are designed to aow remote access to Hyperion Enterprise Reease data. Fie Server Requirements (With Data Server) Tabe 3 ists configuration requirements and recommendations for a Hyperion Enterprise Reease fie server that utiizes Hyperion Enterprise Data Server: System Requirements 15

16 Tabe 3 Fie Server Requirements (with Data Server) Component Processor Memory Operating system Recommended Pentium II - IV (500 MHz or faster, depending on number of users and size of appication) 1 GB minimum (depending on the size of the appication) Server Operating System 32-bit Windows 2003 Server Service Pack 2 (Standard, Enterprise and Web Edition) Windows 2003 R2 Server Service Pack 2 Windows 2008 Server Service Pack 1 Must provide fie service support to the cient workstation. Server Operation System 64-bit (x64 based Ony) Windows 2003 Server Service Pack 2 x64 Windows 2008 Server Service Pack 1 x64 Windows 2008 R2 Server Fie server Network communication software Swap fie Recommended: A dedicated fie server for the Appication Server A dedicated fie server for the Hyperion Enterprise Appication and Data Servers Windows 2003 Server (with Service Pack 2) Windows 2008 Server (with Service Pack 1) Up to 2.5 times the size of the physica memory. Foow Microsoft recommendations if physica memory resources become an issue. Hyperion Enterprise Web Cient There are no specia operating system requirements for the Web cient. Hyperion Enterprise users can oad data, perform consoidations, and work on journas through a Web-based user interface. You can use Web browsers (32-bit) such as: Microsoft Internet Exporer 6.0, 7.0 and 8.0 or Firefox 3.5.x and 3.6.x. We aso support 64-bit Web browsers such as: Microsoft Internet Exporer 7.0 and 8.0. Tabe 4 Web Server Requirements Component Requirements Virtua Machine and User Interface Design Framework Java or higher is required Hyperion Enterprise Web Server The Hyperion Enterprise administrator buids and maintains the appication on a x86 server. Tabe 5 shows the requirements for Hyperion Enterprise Web Server. 16 Panning the Instaation

17 Tabe 5 Windows 32-bit based Server Requirements Component Microprocessor Memory Disk space Requirements Pentium III or ater 1 GB minimum (depending on the size of the appication) 500 MB minimum Operating system Windows 2003 Server (with Service Pack 2) with IIS 6.0 Windows 2008 Server with IIS 7.0. Other Java (32-bit ony) or higher is required pug-in Tabe 6 Web Server Requirements Component Microprocessor Memory Disk space Requirements Pentium III or ater 1 GB minimum (depending on the size of the appication) 500 MB minimum Operating system Windows 2003 Server (with Service Pack 2) with IIS 6.0 Windows 2008 Server with IIS 7.0. Other Java (32-bit ony) Appication Server Requirements for Hyperion Enterprise These are the requirements for setting up your appication server for server processing. For more information on instaing Windows 2003 Server and instaing and managing TCP/IP services, refer to the Microsoft Windows 2003 Server Instaation Guide. Tabe 7 shows the Hyperion Enterprise appication server requirements. Your paging fie size setting shoud be the Microsoft Corporation recommendation for your operating system. Tabe 7 Appication Server Requirements Component Processor Requirements Minimum - Pentium at 500 MHz (Mutipe processors recommended.) Memory 512 MB minimum 1 GB or more recommended Disk space 500 MB minimum System Requirements 17

18 Component Operating system Requirements Server Operating System 32-bit Windows 2003 Server Service Pack 2 (Standard, Enterprise and Web Edition) Windows 2003 R2 Server Service Pack 2 Windows 2008 Server Service Pack 1 Must provide fie service support to the cient workstation. Server Operating System 64-bit (x64 based Ony) Windows 2003 Server Service Pack 2 x64 Windows 2008 Server Service Pack 1 x64 Windows 2008 R2 Server Performance tuning See Performance Tuning on page 120 Message Server Requirements for Hyperion Enterprise These are the requirements for setting up your message server for server processing. For more information on instaing Windows 2003 Server and instaing and managing TCP/IP services, refer to the Microsoft Windows 2003 Server Instaation Guide. The Message Server for Hyperion Enterprise is avaiabe in Windows 32-bit Message Server and Web-based Message Server. Tabe 8 shows the Hyperion Enterprise Window 32-bit message server requirements. Your paging fie size setting shoud be the Microsoft Corporation recommendation for your operating system. Tabe 8 Window 32-bit Message Server Requirements Component Processor Requirements Minimum - Pentium at 500 MHz (Mutipe processors recommended.) Memory 512 MB minimum 1 GB or more recommended Disk space 500 MB minimum Operating system Windows 2003 Server (with Service Pack 2) Windows 2008 Server Instaed TCP/IP Tabe 9 shows the Hyperion Enterprise Web based message server requirements. Tabe 9 Web-based Message Server Requirements. Component Processor Requirements Minimum - Pentium at 500 MHz (Mutipe processors recommended.) 18 Panning the Instaation

19 Component Requirements Memory 512 MB minimum 1 GB or more recommended Disk space 500 MB minimum Operating system Windows 2003 Server (with Service Pack 2) with IIS 6.0 instaed. Any version of IIS above 6.0 wi not insta on the Windows 2003 Server operating system. Windows 2008 Server (with Service Pack 1) with IIS 7.0 instaed. Hyperion Enterprise Smart View Provider Requirements The foowing tabe ists the system requirements for instaing Hyperion Enterprise Orace Hyperion Smart View for Office, Fusion Edition Provider. Tabe 10 System Requirements for Hyperion Enterprise Smart View Provider Component Microprocessor Requirements Pentium III or ater Memory 256 MB minimum 512 MB or more recommended Disk Space 500 MB minimum Operating System Windows 2003 Server (with Service Pack 2) with IIS 6.0 Other ASP.NET 2.0 Windows 2008 Server with IIS 7.0 Prerequisites Compete the foowing tasks before you insta Hyperion Enterprise Reease : 1. Carefuy review the Hyperion Enterprise Reease Readme document. 2. Cose a Windows programs. 3. If you are upgrading from an earier reease, compete the foowing tasks using the earier reease: Back up existing Hyperion Enterprise appications. Extract the appications that you want to run on reease from your existing reease of Hyperion Enterprise. If you use a customized oad.per fie, save a copy in another directory and move it back to the program directory after the instaation is compete. 4. If you have Hyperion Enterprise reease or earier instaed on your system, you shoud uninsta the previous versions as outined in Chapter 7, Uninstaing Hyperion Prerequisites 19

20 Enterprise. Hyperion Enterprise reease supports upgrade instaation of reease or higher. Note: If you have Hyperion Enterprise reease or higher instaed on your system, you can skip step Uninsta Hyperion Enterprise Appication Server and Hyperion Enterprise Data Server, if they are instaed: a. To uninsta Hyperion Enterprise Appication Server and Hyperion Appication Data Server, seect Start > Settings > Contro Pane. b. Doube-cick Add or Remove Program. c. Seect Hyperion Enterprise and cick Change/Remove. The Setup Type diaog box is dispayed. d. Seect Modify the Instaation and cick Next. The Seect Component diaog box is dispayed. e. Seect Hyperion Enterprise Appication Server and Hyperion Enterprise Data Server. f. Cick Next to uninsta. 6. If you use Nove Cient 32, set Fie Cache Leve to 0 (zero). 7. If you use a 100 MB Ethernet connection, hard code the speed and dupex settings; do not use the autonegotiate option. However, if you are using Citrix or Termina Servers, then disabe autonegotiate on the Citrix and Termina servers. 8. Make sure that you have Modify access to the foowing directories: Your Windows system directory; for exampe, c:\windows\system Your temporary directory; for exampe, c:\temp Your Hyperion Soutions appications directory; for exampe, c:\program fies \Hyperion Soutions\ Your Hypent Home directory; for exampe c:\hypent_home 9. If you are instaing in a Windows 2003 or Windows 2008 environment, make sure that you have administrator rights. 10. If you have Hyperion Enterprise Reporting instaed, refer to the Hyperion Enterprise Reporting Instaation Guide for compatibiity requirements and make sure that your path incudes the Hyperion Enterprise Reporting directory. 11. If you are instaing Hyperion Enterprise for the first time or converting from Hyperion Enterprise SE Reease 1.8.2, convert your reports and books. To obtain the Hyperion Enterprise Reease Report Conversion Utiity, contact your oca Cient Support office. This utiity is not incuded in the instaation media for this reease. 12. If you are instaing the Hyperion Enterprise Web Server, verify that you have Microsoft IIS and the required Java pug-in instaed. For more information, see Hyperion Enterprise Web Server on page Panning the Instaation

21 13. Make sure that a users accessing the same appication map to the same drive and path or use UNC notation. 14. Be aware of the functiona changes between reeases of Hyperion Enterprise. For more information, see the Hyperion Enterprise Readme document. Additiona Prerequisites The foowing topics describe prerequisites for instaing Statutory Consoidation Engine, Setting up Hyperion Enterprise Servers, Setting up Security Rights, Setting up Hyperion Enterprise Web Servers, Instaing and configuring Microsoft IIS, Hyperion Enterprise Appication Server, Hyperion Enterprise Smart View Provider, and isting the Components and their directories. Hyperion Enterprise Appication Server If Hyperion Enterprise Appication Server is instaed on the computer that is seected for update and Windows 2008 is aso instaed, then foow these steps prior to instaing Hyperion Enterprise: Create a Registry Key named Sources of type REG_ MULTI_SZ, under the registry entry: HEKEY_LOCAL_MACHINE\System\CurrentControSet\Services\EventLog \Appication Using Hyperion Enterprise Appication Server on Windows or 64-bit ä To change the Windows registry prior to instaing Enterprise on Windows or 64- bit, perform the foowing steps: 1 From the Start Menu, run Regedit. 2 Find the registry key : HKEY_LOCAL_MACHINE\System\CurrentControSet\Services \EventLog\Appication 3 Right cick on Appication. 4 Seect New > Muti-String Vaue. 5 Name the string "Sources". 6 Confirm the Type vaue is REG_MULTI_SZ. 7 Cose the registry and reboot. Statutory Consoidation Engine You must have Modify rights to a Statutory Consoidation Engine (SCE) directories. Additiona Prerequisites 21

22 Hyperion Enterprise Servers Before instaing and using Hyperion Enterprise Appication Server, Hyperion Enterprise Data Server, Hyperion Enterprise Web Server, and Hyperion Enterprise Message Server you must verify TCP/IP connectivity and set up security rights. Verifying TCP/IP Connectivity ä To verify TCP/IP connectivity: 1 Make sure that both the server and the cient workstations have TCP/IP instaed and that each computer is uniquey identifiabe by way of a TCP/IP address. 2 If dynamic resoution is not supported, make sure that the IP address of the server is resoved in the hosts fie ocated in the system32\drivers\etc\ subdirectory for Windows Verify connectivity between the cient workstation and server: a. From a Command Prompt ine on the cient workstation, type the foowing command: ping servername. b. Press Enter. A repy from the server indicates that connectivity has been vaidated. Setting Up Security Rights Before you insta and set up the Hyperion Enterprise Data Server, you must ensure that the Windows 2003, or Windows 2008 user ID that is used to insta and start the service has the proper Windows 2003 or Window 2008 administrator permissions. Rights to take these actions are required: Log on as a service. Log on ocay. Act as part of the operating system. For more detaied information on Windows 2003, or Windows 2008 administrator permissions, refer to the Windows 2003, or Windows 2008 documentation. The Web Virtua Directory, Session Manager, and Task Server a require a system (Windows 2003 or 2008) user ID and password; the same user ID shoud be used for a three. The user must have read/write access to the fie server (where the Hyperion Enterprise appications and executabes are ocated), the Web Server directory, and the fie upoad ocation on the task server. In addition to the required Windows 2003 or Windows 2008 administrator permissions, the user must have administrator permissions to access the network and administrator access to the Hyperion Enterprise appication. ä To set up Windows 2003 or Windows 2008 security rights: 1 From the Windows Start menu: 22 Panning the Instaation

23 a. In Windows 2003, seect Programs > Administrative Toos > Loca Security Poicy. b. In Windows 2008, seect Contro Pane > Administrative Toos > Loca Security Poicy. 2 Seect Loca Poicies > User Rights Assignment. 3 Cick Log on as a service. 4 Cick Add to assign this right to a user ID or group. 5 Seect the user ID or group, cick Add, then cick OK. 6 Cick Act as part of the operating system and repeat steps 4 and 5. 7 Cick Log on ocay and repeat steps 5 and 6. 8 Cick OK and exit the program. 9 Reboot the computer. Hyperion Enterprise Web Server If you are instaing the Hyperion Enterprise Web Server for Web-based consoidations, data oads, and journas access with Hyperion Enterprise Reease , you must insta Microsoft IIS on the Hyperion Enterprise Web Server computer first. Pease note that the appication metadata must be oaded before you can use the Web Service. For instructions, see Chapter 4, Instaing Hyperion Enterprise. Instaing and Configuring Microsoft IIS Instaing IIS on Windows bit Operating System ä If you pan to use Hyperion Enterprise Web, then foow these steps prior to instaing Hyperion Enterprise: 1 Insta IIS7.0, incuding the Appication Deveopment options: Seect Start > Administrative Toos > Server Manager > Roes. Right-cick on Roes and seect Add Roes. Seect Web Server (IIS) and cick Next. An introduction to the Web Server page is dispayed. Cick Next to continue. Seect Appication Deveopment, IIS 6 Management Compatibiity options and Management Service in the roe services pane to insta IIS and cick Next. Confirm instaation seections for Web server (IIS) and cick Insta. 2 After instaation, run the foowing command from the either the command or Windows Run prompt verbatim (you may copy this command into notepad and then paste the same into the Command or Run prompt): Additiona Prerequisites 23

24 %windir%\system32\inetsrv\appcmd set config - section:appicationpoos - appicationpoodefauts.enabe32bitapponwin64:true 3 Perform Hyperion Enterprise compete instaation on Windows bit operating system. ä If Hyperion Enterprise Web is aready instaed on the computer that is seected for update, then foow these steps: 1 Disabe a Data Server enabed appications and then shutdown a processes. 2 Uninsta Hyperion Enterprise and reboot. 3 Uninsta IIS7.0 and reboot. 4 Insta IIS7.0, see the Instaing IIS on Windows bit Operating System 5 After instaation, run the foowing command from the either the command or Windows run prompt verbatim (you may copy this command into notepad and then paste the same into the Command or Run prompt): %windir%\system32\inetsrv\appcmd set config - section:appicationpoos - appicationpoodefauts.enabe32bitapponwin64:true 6 Perform Hyperion Enterprise compete instaation on Windows bit operating system. For information on instaing and configuring Microsoft IIS, see Appendix A, Manua Configuration of Web Environment. Prerequisites for Instaing Hyperion Enterprise Reease on Windows bit Operating System Prerequisites: Ensure IIS 6 64-bit is instaed. Note: If Hyperion Enterprise is not instaed on the computer. Pease foow these steps prior to instaing Hyperion Enterprise. ä To insta Hyperion Enterprise Reease on Windows Server bit Operating System. 1 Run the foowing command from a command prompt: cscript %SYSTEMDRIVE%\inetpub\adminscripts\adsuti.vbs SET W3SVC/ AppPoos/Enabe32bitAppOnWin Downoad both the 32 bit and 64 bit instas for JRE from the website 3 Insta the 32 bit version of JRE (this must be instaed first). 4 Insta the 64 bit version of JRE (this must be instaed after instaing the 32 bit version). 5 Ensure that the 32 bit version of ASP.NET version is set to Aowed in the Web Service Extensions ist in Internet Information Services Manager. 24 Panning the Instaation

25 6 Insta Hyperion Enterprise and Hyperion Enterprise Reporting Note: If Hyperion Enterprise is aready instaed on the computer that is seected for update, then foow these steps. ä To upgrade the Hyperion Enterprise Reease on Windows 2003 Server 64-bit environment 1 Uninsta both Hyperion Enterprise and Hyperion Enterprise Reporting. 2 Seect Start > Contro Pane > System and then seect the Environment Variabes button on the Advanced tab. 3 Remove references to Hyperion Enterprise in the Path. 4 Reboot the system. 5 Run the foowing command from a command prompt: cscript %SYSTEMDRIVE%\inetpub\adminscripts\adsuti.vbs SET W3SVC/ AppPoos/Enabe32bitAppOnWin Downoad both the 32 bit and 64 bit instas for JRE from the website 7 Insta the 32 bit version of JRE (this must be instaed first). 8 Insta the 64 bit version of JRE (this must be instaed after instaing the 32 bit version). 9 Ensure that the 32 bit version of ASP.NET version is set to Aowed in the Web Service Extensions ist in Internet Information Services Manager. 10 Insta Hyperion Enterprise Reease and Hyperion Enterprise Reporting Reease Hyperion Enterprise Smart View Provider You must perform these prerequisites to insta Hyperion Enterprise Smart View Provider. 1. You must insta Hyperion Enterprise Reease with the Hyperion Enterprise Web component before instaing Hyperion Enterprise Smart View provider to work with Smart View. 2. You must have a vaid icense agreement to run Orace Hyperion Smart View for Office, Fusion Edition. Components and Their Directories When you run the setup program, you can insta Hyperion Enterprise Reease either in the defaut directory suggested by the setup program or you can specify other directory. Note: The string HE cannot be used as a directory name when instaing Hyperion Enterprise. Additiona Prerequisites 25

26 Tabe 11 shows ocation where components are instaed: Tabe 11 Location of Components Instaed Components Hyperion Enterprise Reease Note: Hyperion Retrieve is automaticay instaed with Hyperion Enterprise Reease Hyperion Enterprise Office Provider Hyperion Statutory Consoidation Engine (SCE) Hyperion Enterprise Appication Server Hyperion Enterprise Data Server Hyperion Enterprise Message Server Hyperion Enterprise Web Server Hyperion Enterprise Conversion Utiities Hyperion Aocations Hyperion LedgerLink Hyperion AutoPiot Hyperion SmartView provider Hyperion Enterprise Extraction Utiity Instaation Locations Drive:\program fies\ hyperion soutions\ hyperion enterprise Note: In reeases of Hyperion Enterprise earier than Reease 6.0, the defaut program directory was hypent. This instaation does not overwrite or deete any existing hypent directory. Manuay update your autoexec.bat fie or environment variabe to remove the od reference to the hypent directory from your path statement. Instaation Tasks When instaing Hyperion Enterprise, you may need to perform the foowing tasks: Check the system requirements. For more information, see System Requirements on page 13. Seect one of these instaation methods: Quick Insta, Sient Mode Insta, or a Reguar insta. For more information, see Chapter 3, Quick Insta and Sient Mode Instaation, or Chapter 4, Instaing Hyperion Enterprise. Insta add-ons for Hyperion Enterprise. For more information, see Chapter 5, Additiona Instaation Procedures. Convert your current appication to a newer version of Hyperion Enterprise. For more information, see Chapter 6, Converting Your Appication to Hyperion Enterprise Reease Configure Microsoft IIS to depoy Hyperion Enterprise for the Web environment. For more information, see Appendix A, Manua Configuration of Web Environment. 26 Panning the Instaation

27 Review avaiabe documentation accompanying this reease. For more information, see Appendix B, Hyperion Enterprise Documentation. Review a ist of program fies instaed in your Windows system directories during instaation. For more information, see Appendix C, Program Fies Inventory. Review descriptions of the products and add-ons avaiabe in this reease. For more information, see Appendix D, Product Inventory. Compatibe Products If you have Hyperion Enterprise Reporting instaed, refer to the Hyperion Enterprise Reporting Instaation Guide for compatibiity requirements. Port Numbers Used by Hyperion Products See Appendix E, Ports Port Numbers Used by Hyperion Products 27

28 28 Panning the Instaation

29 3 Quick Insta and Sient Mode Instaation In This Chapter Instaation Methods...29 Performing a Quick Insta...29 Sient Instaation...31 Driver Count Settings...32 This chapter describes the most direct way to perform a Hyperion Enterprise instaation. Instaation Methods Quick Insta and Sient Mode instaation use the defaut seections of the instaation program. Use Quick Insta and Sient Mode ony if the foowing statements is true: You want to insta ony core Hyperion Enterprise and none of its components. You want to insta a fies on a oca or network drive, then run Hyperion Enterprise from that drive. If your situation does not meet these conditions or if you want to insta a different set of products, see Chapter 4, Instaing Hyperion Enterprise for instructions on instaing this reease. Note: When uninstaing an earier reease of Hyperion Enterprise, you must exit Hyperion Enterprise appication, Hyperion Enterprise Data Server, Hyperion Enterprise Web Server, and Hyperion Enterprise Appication Server. Faiure to cose these programs produces a message stating that a component move data error has occurred. Orace's Hyperion recommends that you remove any earier reease of Hyperion Enterprise before upgrading to a new reease. Hyperion Enterprise reease supports upgrade Instaations from ony. Performing a Quick Insta The Quick Insta procedure does not insta Hyperion Enterprise Data Server, Hyperion Enterprise Appication Server, Hyperion Enterprise Message Server, Web Server, Statutory Consoidation Engine, Hyperion LedgerLink, Aocations, Hyperion AutoPiot, or the Hyperion Enterprise conversion utiities. Instaation Methods 29

30 Before you use the Quick Insta procedure, refer to Chapter 2, Panning the Instaation. ä To perform a Quick Insta: 1 From the Windows Start menu, run path\insta.exe where path is the path to the Hyperion Enterprise instaation directory. The Seect Insta Language screen is dispayed. 2 In the Seect Insta Language diaog box, seect a anguage, then cick OK. Note: The defaut anguage is set to Engish. The Wecome screen is dispayed. 3 In the Wecome screen, cick Next. The Hyperion Enterprise agreement diaog box is dispayed. 4 Cick Yes to continue. The Hyperion Enterprise Setup diaog box is dispayed. 5 Seect the type of setup that you want to insta and cick Next. The Retrieve Version Seection diaog box is dispayed. 6 Seect the required version of Hyperion retrieve and cick Next. The Choose Destination diaog box is dispayed. 7 Specify the directory in which to insta Hyperion Enterprise: To accept the defaut instaation directory, cick Next. To seect an instaation directory other than the defaut, cick the Browse button and navigate to that directory, then cick Next. The Seect Component diaog box is dispayed. 8 Seect the components that you want to insta and cick Next. The Seect Program Foder diaog box is dispayed. 9 Specify the program foder where Hyperion Enterprise program icons wi be stored: To accept the defaut program foder, cick Next. To store the icons in a program foder other than the defaut, cick the directory name in the Existing Foders ist and then cick Next. 10 Review your current instaation settings, then cick Next. 11 Cick Finish to cose the Hyperion Enterprise instaation. 30 Quick Insta and Sient Mode Instaation

31 Note: With the instaation of Hyperion Enterprise you can create appications and perform tasks as outined in the Hyperion Enterprise Administrator s Guide and the Hyperion Enterprise User s Guide. However, in order to work with reports you need to insta Hyperion Enterprise Reporting. For more information on instaing Hyperion Enterprise Reporting refer the Hyperion Enterprise Reporting Instaation Guide. Sient Instaation If you want to insta Hyperion Enterprise on mutipe computers using the same instaation options, you can record your instaation settings and then run a sient instaation from the command ine. Sient instaations automate the instaation process so that you can insta Hyperion Enterprise without specifying instaation settings each time. Before you perform a Sient Mode instaation, refer to Chapter 2, Panning the Instaation. Sient Mode instaation creates a og fie, setup.og in the instaation directory, which is where the setup.exe fie is ocated. The og fie contains the resuts of the Sient Mode instaation, incuding any error codes. Performing a Sient Mode Instaation ä To perform a Sient Mode instaation: 1 Copy the instaation fies for the anguage you are instaing either to a oca drive, a different ocation on the same network drive, or a different network drive. 2 From the Windows Start menu, cick Run. 3 Type path\setup.exe -r where path points to the Hyperion Enterprise instaation directory on your network drive. Note: Do not incude spaces in the path. 4 On the Wecome screen, cick Next. 5 On the License Agreement screen, cick Yes to continue. 6 Seect the type of setup that you want to insta, then cick Next. 7 Seect the required version of Hyperion retrieve and cick Next. 8 Specify the directory in which to insta Hyperion Enterprise: To accept the defaut instaation directory, cick Next. To seect an instaation directory other than the defaut, cick the Browse button and navigate to that directory, then cick Next. 9 In the Seect Component diaog box, seect the components you want to insta and cick Next. 10 In the Seect Program Foder diaog box, specify the program foder where Hyperion Enterprise program icons wi be stored: To accept the defaut program foder, cick Next. Sient Instaation 31

32 To seect a program foder other than the defaut, cick the Browse button and navigate to that program foder, then cick Next. 11 Review your current instaation settings, then cick Next. 12 Cick Finish to cose the Hyperion Enterprise instaation. The instaation process creates a setup.iss fie in your Windows directory. 13 Copy the setup.iss fie to the network directory where the Hyperion Enterprise setup.exe fie is ocated. 14 To insta Hyperion Enterprise on another computer using Sient Mode, run path\setup.exe -s where path points to the Hyperion Enterprise instaation directory on your network drive. The og fie for the main setup, setup.og, is in the directory where the main response fie is ocated. Driver Count Settings If the driver count HPDRVCNT in the hypent.ini fie does not equa the number of HPDRVn ines, an error message might be dispayed. To resove this, you must enter the appropriate additiona HPDRVn ine in the hypent.ini fie, as in the foowing exampes: Fie-based version of Hyperion Enterprise: HPDRV1=HEFie,HEFieUI,Fie-based Appication 32 Quick Insta and Sient Mode Instaation

33 4 Instaing Hyperion Enterprise In This Chapter Setup Options...33 Performing a Compete Instaation...33 Performing a Workstation Setup Instaation...57 Verifying Your Path...66 Driver Count Setting...66 Setup Options You use the setup program to insta this reease of Hyperion Enterprise. You can seect from three setup options: Compete Setup Instas the products that you seect to a oca or network drive. You then run those products from that drive. Workstation Setup Instas a minima number of fies on a workstation. You then run the instaed products from the network. Therefore, you must perform the Compete Setup option to insta Hyperion Enterprise on a network drive before you can perform the Workstation Setup option. Modify Seectabe Instaation Components Enabes you to customize a copy of the setup program if you want to eiminate one or more product components from subsequent instaations for security reasons. This chapter describes the Compete Setup and Workstation Setup procedures. For information about the Modify Seectabe Instaation Components option, see Creating a Customized Setup Program on page 69. Performing a Compete Instaation During a compete instaation, the Hyperion products that you seect are instaed on a oca or network drive. You can then run those products from that drive. If you are instaing Hyperion Enterprise on a computer that has a server operating system, you can seect options to insta the Appication Server, Data Server, Web Server, and Message Server components. If you do seect those options, the compete instaation process incudes steps for Setup Options 33

34 setting up those components. The steps for beginning and finishing a compete instaation are the same regardess of the computer s operating system. Beginning a Compete Instaation The beginning steps of a compete instaation of Hyperion Enterprise are the same for a computers, regardess of their operating systems. ä To begin performing a compete instaation of the Hyperion Enterprise software: 1 Take one of these actions: If you downoaded the Hyperion Enterprise software from the Orace E-Deivery site, take one of these steps: m m Navigate to the directory where you downoaded the instaation program, then doube-cick insta.exe. From the Windows Start menu, seect Run, type the foowing command in the Run diaog box, and cick OK: Drive\directory\insta.exe where Drive and directory are the ocation of the Hyperion Enterprise instaer. The Seect Insta Language diaog box is dispayed. 34 Instaing Hyperion Enterprise

35 2 In the Seect Insta Language, seect a anguage, then cick OK. Note: The defaut anguage is set to Engish. A message is dispayed to say that the setup program is being prepared: When the setup program is ready, its Wecome screen is dispayed: Performing a Compete Instaation 35

36 3 Cick Next. The License Agreement diaog box is dispayed. 36 Instaing Hyperion Enterprise

37 4 Read the icense agreement carefuy and seect one of the foowing: To view the previous screen, seect Back. To continue with the instaation, seect Yes. To exit instaation, seect No. If you seected Yes in the License Agreement diaog box, then the Hyperion Enterprise Setup diaog box is dispayed. 5 Seect Compete Setup, then cick Next. The Retrieve Version Seection diaog box opens. Performing a Compete Instaation 37

38 6 Seect a retrieve version and cick Next. Note: The Retrieve shortcut option diaog box is dispayed ony if Microsoft Exce in instaed on your system. The Choose Destination Location diaog box is dispayed. 38 Instaing Hyperion Enterprise

39 7 Cick Next. to insta Hyperion Enterprise in the defaut foder. To seect an instaation directory other than the defaut: a. Cick the Browse button. The Choose Foder diaog box is dispayed: b. Seect the directory where you want to insta Hyperion Enterprise. c. Cick OK to return to the Choose Destination Location diaog box. Performing a Compete Instaation 39

40 d. Cick Next. The Hyperion Enterprise Home Path diaog box is dispayed. User Account Contro in Windows Vista and Windows 2008 Server improves the safety and security of your computer by preventing potentiay insecure software from making changes to your computer without your expicit authority. To support the User Account Contro (UAC) feature, the HYPENT_HOME foder is created during Instaation; this foder contains the Hyperion Enterprise system INI fies: hypent.ini and repeng.ini. The ocation of HYPENT_HOME can be defined during the instaation routine. As a resut of the new security enhancement in Windows Vista and Windows 2008 Server, these two Hyperion Enterprise system INI fies are moved from the WINDOWS system foder to the HYPENT_HOME foder. The <appication>.ini fie is present in the appication foder. Note: To use the User Access Contro feature, during instaation; for specifying ocation of system wide fies, seect either the defaut : <Insta Drive \hypent_home> or specify a custom ocation. Do not seect either the Program Fies foder or the Windows foder. To insta the Hyperion Enterprise Home in the defaut path or if you want to insta the Hyperion Home other than the defaut seected then do these tasks: i. Cick the Browse button: ii. To seect a different instaation path: 40 Instaing Hyperion Enterprise

41 The Choose Foder diaog box is dispayed: iii. iv. Seect the directory where you want to insta Hyperion Enterprise, or type in a directory name. The foder wi be created. Cick OK v. Cick Next. The Seect Components diaog box is dispayed. The Destination Foder box identifies the instaation directory that you specified: Performing a Compete Instaation 41

42 Note: If you are instaing Hyperion Enterprise on a computer with a server operating system, the ist of components incudes the Hyperion Enterprise Appication Server, Hyperion Enterprise Data Server, Hyperion Enterprise Message Server, Hyperion Enterprise Web Server components, and Hyperion Enterprise Extraction Utiity. Otherwise, the ist does not incude these options. 8 Specify which Hyperion Soutions products you want to insta: a. Seect the check boxes for a the products and utiities that you want to insta, and cear the check boxes for any products that you do not want to insta. Note: Externa Security Services is a utiity that enabes you to use the Windows domain security instead of core Hyperion Enterprise Security. b. If the Space Required number is greater than the Space Avaiabe number, seect a disk drive that has sufficient space for the instaation: i. Cick the Disk Space button. The Avaiabe Space diaog box is dispayed: ii. iii. From the Drive drop-down ist, seect a disk drive where the space avaiabe equas or exceeds the space required. Cick OK to return to the Seect Components diaog box. c. To insta Hyperion Enterprise in a directory other than the one you seected earier, which you need to do if you have seected a different disk drive: i. Cick the Browse button: The Choose Foder diaog box is dispayed: 42 Instaing Hyperion Enterprise

43 ii. iii. d. Cick Next. Seect the directory where you want to insta Hyperion Enterprise, or type in a directory name. The foder wi be created. Cick OK to return to the Seect Components diaog box. e. At the background the setup instas the MSXML6 component. The MSXML6 window diaog box is dispayed f. The Seect Program Foder diaog box is dispayed: Performing a Compete Instaation 43

44 9 Specify the program foder for storing Hyperion Enterprise program icons: To accept the defaut program foder, cick Next. Note: If you seected the option for instaing the Hyperion Enterprise Appication Server, Hyperion Enterprise Data Server, Hyperion Enterprise Message Server, or Hyperion Enterprise Web Server component, see Setting Up Server Components on page 45. To store the icons in a program foder other than the defaut, Enter a name or cick the directory name in the Existing Foders ist and then cick Next. 44 Instaing Hyperion Enterprise

45 10 Review your instaation settings and take one of the foowing steps: a. If any setting is incorrect, cick Back and return to the diaog box where you can change it. b. If the settings are correct, cick Next. A message is dispayed to te you that the setup program is instaing Hyperion Enterprise: 11 See one of these topics for instructions on continuing with the compete instaation: If you did not seect the option for instaing the Appication Server, Data Server, or Web Server component, see Finishing a Compete Instaation on page 56. If you seected the option for instaing Externa Security Services, see Instaing Common Security Services (CSS) on page 53. Setting Up Server Components If you are instaing Hyperion Enterprise on a computer with a server operating system and you seected an option for instaing the Appication Server, Data Server, Message Server, or Web Performing a Compete Instaation 45

46 Server component, the compete instaation process incudes steps for setting up Hyperion Enterprise to access one or more of those servers. ä To set up Hyperion Enterprise server components: 1 On a computer with a server operating system, foow the procedure described in Beginning a Compete Instaation on page 34, seecting one or more of these options from the Seect Components diaog box: Enterprise Appication Server Enterprise Data Server Enterprise Web Server Enterprise Message Server The Hyperion Enterprise Server Logon Credentias diaog box opens: 2 In the Name text box, enter the domain name of the server and a vaid user name in this format: computer\username where computer is the name of the computer or domain where the Hyperion Enterprise service account resides. 3 Enter your password in the Password text box, enter it again in the Confirm Password text box, and then cick the Next button. The Appication Server Settings diaog box is dispayed: 46 Instaing Hyperion Enterprise

47 4 To set up the Hyperion Enterprise Appication Server component, the Hyperion Enterprise Data Server component, or both: a. To assign a port number other than the defaut, change the entry in the Port Number text box. b. If you do not want the Appication server connection to start automaticay, cear the Auto Start check box. c. To change the path in either Database Path or Log Fie text box: i. Cick the Browse button. The Choose Foder diaog box is dispayed: Performing a Compete Instaation 47

48 ii. Cick the directory that you want to use. iii. Cick OK to return to the Appication Server Settings diaog box. d. Seect Append Current Session or Overwrite Current Session, then cick Next. Note: If the HEServers.xm fie is not present, then the diaog box prompting you to create this fie is dispayed, cick Yes. If you seected the option for instaing the Hyperion Enterprise Web Server component, the Hyperion Enterprise Web Server Setup diaog box is dispayed: 48 Instaing Hyperion Enterprise

49 5 In the Physica text box, specify a physica directory. To seect a physica directory other than the defaut: a. Cick the Browse button. The Choose Foder diaog box is dispayed: b. Cick the directory that you want to specify. Performing a Compete Instaation 49

50 c. Cick OK to return to the Hyperion Enterprise Web Server Setup diaog box and cick Next. The Enterprise Messaging Server diaog box opens: In the Enterprise Message server diaog box, do the foowing: In the Enterprise Messaging Server group box, seect Web messaging to support messaging feature for Windows 32 and Web-based appications, seect Windows 32 Messaging to support ony Windows 32 messaging. Under Web Messaging, in the Poing Interva setting, provide the required information in seconds. The defaut vaue for the poing interva is three seconds. To assign a physica directory other than the defaut, cick Browse. Note: IIS must be configured. For more information, see Appendix A, Manua Configuration of Web Environment. If IIS is not instaed, then the Web Messaging option is disabed. The Choose Foder diaog box opens. 50 Instaing Hyperion Enterprise

51 a. Seect the directory you want to assign. b. Cick OK to return to the Hyperion Enterprise Smart View Provider Setting diaog box. c. In the Anonymous User text box, enter user's name to access server. d. In the Anonymous Password text box, enter the password. e. Cick Next to continue. The Hyperion Enterprise Smart View Provider Setting diaog box opens. Performing a Compete Instaation 51

52 To set up Smart View Provider: To assign a physica directory other than the defaut, cick Browse. Note: You cannot change the virtua directory. The Choose Foder diaog box opens. 52 Instaing Hyperion Enterprise