RSM Web Gateway RSM Web Client INSTALLATION AND ADMINISTRATION GUIDE

Size: px
Start display at page:

Download "RSM Web Gateway RSM Web Client INSTALLATION AND ADMINISTRATION GUIDE"

Transcription

1 RSM Web Gateway RSM Web Client INSTALLATION AND ADMINISTRATION GUIDE Installation and Administration Guide RSM Web Client and RSM Web Gateway 17 August, 2004 Page 1

2 Copyright Notice 2004 Sony Corporation. All rights reserved. This manual may not be reproduced, translated or reduced to any machine readable form in whole or in part, without prior written approval from Sony Corporation. SONY CORPORATION PROVIDES NO WARRANTY WITH REGARD TO THIS MANUAL OR INFORMATION CONTAINED HEREIN AND HEREBY EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE WITH REGARD TO THIS MANUAL OR SUCH INFORMATION. IN NO EVENT SHALL SONY CORPORATION BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES, WHETHER BASED ON TORT, CONTRACT, OR OTHERWISE, ARISING OUT OF OR IN CONNECTION WITH THIS MANUAL OR INFORMATION CONTAINED HEREIN OR THE USE THEREOF. Sony Corporation reserves the right to make any modification to this manual or the information contained herein at any time without notice. Trademarks Microsoft, Windows and Windows NT are registered trademarks of Microsoft Corporation. Intel and Pentium are registered trademarks of Intel Corporation. Ethernet is a registered trademark of Xerox Corporation All other brands and product names are trademarks or registered trademarks of their respective owners. Page 2 17 August, 2004

3 Contents Introduction...4 RSM Web Gateway Installation...5 RSM Web Gateway Requirements... 5 Starting the Installation process... 6 Starting RSM Web Gateway Uninstalling RSM Web Gateway RSM Web Client Installation...15 RSM Web Client Requirements Java Runtime Environment Java Plug-in Uninstalling RSM Web Client RSM Web Administration...18 RSM Web Administration Registering RSM Servers with RSM Gateway User Administration Listing RMS Web Client Users Adding Users to the RSM Web Client Editing Roles Assigned to a User Deleting a User From the RSM Web Client Viewing Active Users Recovering Forgotten User Passwords Increasing Performance and Scalability of RSM Web Gateway Appendix...31 Roles Pan, Tilt and Zoom (PTZ) User User Administrator RSM Web Client Administrator Page 3 17 August, 2004

4 Chapter 1 Introduction RSM Web Client and RSM Web Gateway enable you to access your RealShot Manager installation though a web browser. Figure 1 illustrates a typical RSM Web system architecture. Up to 32 cameras RSM Web Client RSM Web Gateway Up to 32 cameras RSM Servers Trusted Network Up to 32 cameras Figure 1 System Example This document describes how to: Install the RSM Web Gateway Install the RSM Web Client. Administer the RSM Web Client. Page 4 17 August, 2004

5 Chapter 2 RSM Web Gateway Installation This section describes how to install RSM Web Gateway on your computer. RSM Web Gateway Requirements The following table describes the system configuration required to successfully install the RSM Web Gateway. Where appropriate, links have been provided to sites that provide additional information and support. Administrator rights are required on the installation PC. Operating System Windows 2000 Minimum service pack 3 Windows XP Latest Service Pack CPU 2.0 GHz (or faster) Intel Celeron, Intel P4 or equivalent RAM 512 MB Minimum Hard Disk 500 MB Spare Capacity Web Browser Internet Explorer Version 6.0 or later Miscellaneous Network connection RSM Web Gateway includes software developed by The Apache Software Foundation (http://www.apache.org/). Page 5 17 August, 2004

6 Starting the Installation process To start the installation process, launch the RSM Web installation by double-clicking on the RSM Web Gateway executable file (RSM Web Gateway exe). The installation procedure is outlined below. Step 1 The RSM Web Gateway installer will guide you through the installation. Click Next to continue. Step 2 The installer will detect if the Java Runtime Environment (JRE) is installed and that the version is or higher (excluding version 1.5). If necessary the RSM Web Gateway installer will launch the Java JRE installer. If the JRE is already installed you will skip to step 6. Tick I accept the terms in the license agreement and then click Next to continue. Page 6 17 August, 2004

7 Step 3 Choose Typical and then click Next to continue. Step 4 Wait until the installer has completed copying the files. Step 5 Click Finish to successfully complete the installation of the Java Runtime Environment. The RSM Web Gateway installer will now begin the Apache Tomcat installation. Page 7 17 August, 2004

8 Step 6 The installer will detect if Tomcat 5.0 is installed. If not the RSM Web Gateway installer will launch the Apache Tomcat 5.0 Setup Wizard. Click Next to continue. If Tomcat V5.0 is already installed, the install procedure skips to Step 13. Step 7 Click I Agree to continue the installation of Apache Tomcat 5.0. Step 8 IMPORTANT: Click on the Service check box in the Tomcat node to install Apache Tomcat V5.0 as a service. Click Next to continue. Page 8 17 August, 2004

9 Step 9 Browse to the directory in which Tomcat 5.0 will be installed. Click NEXT to continue. Step 10 Adding the Tomcat V5.0 basic configuration details. N.B. Make a note of the CONNECTOR PORT that you enter here as this is also required for Step 15. Click NEXT to continue. Step 11 Select the folder where the Java JRE is installed. Click INSTALL to continue. Page 9 17 August, 2004

10 Step 12 Wait until the Setup Wizard has finished the Apache Tomcat installation Step 13 Uncheck the two check boxes ( Run Apache Tomcat and Show Readme ) Click Finish to successfully complete the Tomcat installation. Control now passes back to the RSM Web Gateway Installer. Step 14 Selecting the install Destination Directory. Click Change to choose the destination directory. Click Next to continue. Page August, 2004

11 Step 15 Enter the port number on which the Apache Tomcat V5.0 application is running. This is the same as the port number you entered in Step 10. Contact your local Network Administrator to ascertain the port number, if in doubt. Step 16 To launch the RSM Web Gateway automatically on Windows start up: Click on the Start Tomcat web Server check box. Uncheck this box to launch the RSM Web Gateway manually. Step 17 Enter the hostname or IP address and port that clients will use to connect to the RSM Web Gateway. If the server name is not resolvable, enter an IP address. The port is typically the same as the Tomcat port entered in Step 10 and 15. However, if your system is protected by a firewall using Network Address Translation, the port number may be different. If in doubt, consult your Network Administrator. Note: If the details are entered incorrectly for Step 17, users will be unable to view Live Camera Feeds. To change these settings, RSM Web Gateway should be uninstalled then reinstalled. Page August, 2004

12 Step 18 Click Back to change any of the previously entered configuration details or click Install to copy the RSM Web Gateway files onto your computer. Step 19 Click Finish to exit the installer. The RSM Web Gateway is now ready for use. Page August, 2004

13 Starting RSM Web Gateway To start RSM Web Server, navigate to Start Programs Sony RSM Web Gateway and click on Start RSM Web Gateway as shown below: This will start the RSM Web Gateway and open an RSM Web Client session in Internet Explorer. Note: RSM Web Gateway can also be started and stopped using the Windows Services. 1. Navigate to Start Settings Control Panel Administrative Tools Services 2. Select Apache Tomcat from the list. 3. Click on the Start icon. Page August, 2004

14 Uninstalling RSM Web Gateway To uninstall RSM Web Gateway follow the process described below: Step 1 Got to Start Settings Control Panel Add or Remove Programs And select RSM Web Gateway. Click on Change/Remove. Step 2 Click OK to Uninstall RSM Web Gateway will be removed from your computer. Note that this process does not uninstall Tomcat 5.0. To uninstall Tomcat, select Apache Tomcat 5.0 from the Add or Remove Programs window and click on Change/Remove. Page August, 2004

15 Chapter 3 RSM Web Client Installation This section describes how to install RSM Web Client on your computer. RSM Web Client Requirements The following table describes the system configuration required to successfully use RSM Web Client. Where appropriate, links have been provided to sites that provide additional information and support. Operating System Windows 2000 Minimum service pack 3 Windows XP Latest Service Pack CPU 2.0 GHz (or faster) Intel Celeron, Intel P4 or equivalent RAM 512 MB Minimum Hard Disk 500 MB Spare Capacity Web Browser Internet Explorer Version 6.0 or later Miscellaneous Network connection RSM Web Client is designed for minimum installation. To use the RSM Web Client, open Internet Explorer and enter the URL for your RSM Web installation as (for example, You will be presented with the logon page. The default logon details are: User Name: Password: admin admin It is recommended to change the password after logging in. Page August, 2004

16 Java Runtime Environment The Java Runtime Environment version or later is required for the RSM Web Client. Note that Java 1.5, currently available as a beta release, is not supported and should not be present on the server or client. If the JRE is not present, then the following window will appear: Click Yes, and then follow the instructions as outlined in steps 2 to 6 in the RSM Web Gateway installation. Note: It may take some time to download the Java Runtime Environment over a slow network connection. Java Plug-in The RSM Web Client applet is downloaded at logon. The applet s digital certificate is now displayed awaiting your response. Page August, 2004

17 Click Yes to trust the applet for this session only, or click Always to avoid seeing this message again The first time that you run the RSM Web Client on your PC, you are prompted to install an extension for inteljpegdecoder. This enables faster performance when viewing cameras. Note: If the incorrect details were entered in Step 17 of the RSM Web Gateway installation process, this part of the client installation will be unsuccessful, and an error will occur on the RSM Web Client. Click Yes to install the inteljpegdecoder extension. Click OK to continue loading the applet. Uninstalling RSM Web Client The RSM Web Client is a web-based client, therefore there is no uninstall mechanism. Page August, 2004

18 Chapter 4 RSM Web Administration To administer the RSM Web Client you must be assigned one or more or the following roles: RSM Web Client administrator User administrator Each role has the ability to configure the relevant details in the particular area of operation. This section describes the tasks associated with each of these roles and explains how to use them. RSM Web Administration If you have been assigned the role "RSM Web Client Administrator" you can: List all registered RSM Servers Add or remove RSM Servers Modify configuration parameters. Registering RSM Servers with RSM Gateway To expose RSM Servers via RSM Web Gateway, the RSM Servers must be shared and then registered with RSM Web Gateway. Page August, 2004

19 Configure RSM to Share its Resources 1. Open your RealShot Manager General Settings, click on the Remote & Sharing tab and then check the box next to Enable sharing this computer to enable sharing: Specify the name of your RSM Server that users will use to identify the sever and enter the port number that the RSM Server will use for connections from RSM Web Gateway then click OK. 2. Open your RealShot Manager Setup Manager and share any resources which are to be visible to the RSM Web Client and Gateway: Enable the sharing of each camera that you want to make available to users Page August, 2004

20 Share all IO Pins that are to be raised as alarms on the RSM Web Client. It is advisable to give the IO Pin a user friendly, meaningful name, as the IO Pin name will appear on the RSM Web Client when the pin is turned on. For detailed information, refer to your RealShot Manager Administration Guide. Configure RSM Web Gateway to Access your RSM Server(s) 1. Open the RSM Web Client and login using and account with RSM Administrator privileges. The default Administrator login is admin with the password admin it is highly recommended that this password is changed at first login. 2. Click on RSM Admin to open the RSM Server administration page then click on Add RSM Server to add your server. Page August, 2004

21 3. Enter the parameters for the RSM Server machine: IP Address the IP Address of the machine that the RSM Server is running on. Port the port that the RSM Server is shared on. Hostname the hostname of the RSM Server. Can be obtained by typing hostname in a command prompt window on the RSM Server. Username the username that was entered when sharing the RSM Server (RSM 2.2 and later). The password is case sensitive. Password - the password that was entered when sharing the RSM Server (RSM 2.2. and later). The password is case sensitive. Proxy via RSM Web Gateway this should be checked if the RSM Servers are on a network which is not visible to the RSM Web Client. For example, the RSM Servers may be on private, non-routable IP addresses (e.g *.* or 10.*.*.* ) or behind a firewall, or in a network environment which uses Network Address Translation. If in doubt, please consult your network administrator. If ANY of the RSM Server details are entered incorrectly, the RSM Server and cameras will be not be visible to RSM Web Client users. Page August, 2004

22 4. Click Add to add the RSM Server to the list. All users will now be able to see the RSM Server and access the camera feeds shared on it. Note: When the RSM Web Gateway has successfully contacted the RSM Server, the RSM Server name will appear in the name field. Click refresh on the browser in the RSM Admin pages to check that the RSM Server name is available. If the RSM Web Gateway is unable to contact the RSM Server, the name field will remain blank. This may be an indication that the RSM Server is unavailable or the RSM Server details have been entered incorrectly. Repeat the above process to add all of the RSM Servers you want to provide access to through the RSM Web Gateway. Adding the RSM Image Compressor (optional) RSM Web Gateway can regulate the bandwidth used by image streams for clients working in a limited bandwidth environment. This is done using the supplied RSM Image Compressor component to provide on-the-fly compression of the camera feeds through the RSM Web Gateway. Users cannot modify bandwidth settings unless the RSM Image Compressor has been registered via the RSM Admin pages. You must install the RSM Image Compressor then configure the RSM Web Client with the host machine s details as follows: 1. To add the RSM Image Compressor, launch the Image Compressor installation by doubleclicking on the Setup.exe file in the RSM Image Compressor folder. 2. Follow the on screen instructions to perform the installation. By default the RSM Image Compressor is installed to start automatically and communicate on port Refer to the RSM Image Compressor Release Notes for more information about this component. 3. Open the RSM Web Client and login using and account with RSM Administrator privileges. 4. Click on RSM Admin to open the RSM Server administration page then click on RSM Image Compressor to add your RSM Image Compressor. 5. Enter the IP address of the machine that the RSM Image Compressor is installed on and its port number (only if you changed this manually after installation). Page August, 2004

23 6. Click Save to store the changes and to link the RSM Web Gateway with the RSM Image Compressor. A confirmation message is displayed. Modifying your RSM Server Settings If you remove an RSM Server or change the host machine s IP address or Port settings, you need to update the RSM Servers details that are registered with the RSM Web Gateway. 1. Open the RSM Web Client and login using and account with RSM Administrator privileges. 2. Click on RSM Admin to open the RSM Server administration page and view the list of currently configured RSM Servers. 3. Click on the Delete button to remove an RSM Server from the list or click on Modify to change its parameters. Note: If a RSM Server is deleted, users layouts may be affected. You should contact all users to advise them to edit any layouts that contain cameras from the deleted RSM Server. Cameras will be displayed as Camera Missing in the Manage Layouts editor. Note: If a RSM Server is completely uninstalled, then reinstalled and the camera details re-entered, users may find their layouts show different cameras to those expected. Page August, 2004

24 User Administration If you have been assigned the role of "User Administrator" you can: List all RMS Web Client users. Add new users or delete existing users Change the roles of users. View list of users currently logged in. The following sub-sections describe how to perform these tasks. Listing RMS Web Client Users To display a list of the users within the RSM Web Client: 1. Logon to the RSM Web Client. 2. Click on Manage Users in the RSM Web Client menu bar. A list of all users is displayed, as shown below: You may now edit the roles assigned to a selected user or simply delete the user. Page August, 2004

25 Adding Users to the RSM Web Client To display a list of the users within the RSM Web Client: 1. Logon to the RSM Web Client. 2. Click on Manage Users in the RSM Web Client menu bar. A list of all users is displayed, as shown below: 3. Click on the Add User option in the menu bar above the list of All Users to display the Enter new user details window, as shown below: 4. Click in the Username box and enter the username for the new user (must be greater than six characters). 5. Click in the Password box and enter a password for this user which must also be greater than six characters. 6. Click in the Confirm Password box and re-enter the new password. There are four roles that can now be assigned to a user. See Appendix A for a description of these roles. Page August, 2004

26 7. Click on the appropriate check box to assign that role to the selected user each user may be assigned up to four roles, as required. A tick appears in the appropriate check box when a role has been assigned. 8. To de-assign (remove) a role from the selected user, click on the check box of the role. The tick is removed from the check box signifying that this user no longer has this role. 9. Click the Add button to store the details for this user and display the All Users list containing the new user. Editing Roles Assigned to a User 1. Click on the Edit User button for the required user on the All Users display. The Edit User window is displayed for the selected user. In the illustration below the user called, Michael is selected for editing. There are four roles that can be assigned to a user. See Appendix A for a description of these roles. 2. Click on the appropriate check box to assign that role to the selected user each user may be assigned up to four roles, as shown below: A tick appears in the appropriate check box when a role has been assigned. 3. To de-assign (remove) a role from the selected user, click on the check box of the role. The tick is removed from the check box signifying that this user no longer has this role. 4. Click the Save button to store the details for this user. The Delete procedure is also available from the Edit User window. 1. Click on the Delete <Username> button to delete this user. This procedure is identical to the Delete procedure described below. Page August, 2004

27 Deleting a User From the RSM Web Client To display a list of the users within the RSM Web Client: 1. Logon to the RSM Web Client. 2. Click on Manage Users in the RSM Web Client menu bar. A list of all users is displayed, as shown below: 3. Click on the Delete button for the required user on the All Users display. In the illustration above the user called, Johnathan is selected for deletion. A confirmation message is now displayed awaiting your response. 4. Click on the OK button to delete the selected user. The user is deleted with no further confirmation required. Viewing Active Users To display a list of active users who are currently logged on to the RSM Web Client: 1. Logon to the RSM Web Client. 2. Click on the Manage Users option in the RSM Web Client menu bar. A list of all users is displayed, as shown below: Page August, 2004

28 3. Click on the Active Users option in the menu bar above the list of All Users to display the Currently Active Users window, as shown below: 4. Click the List Users option in the menu bar to return to the list of All Users, if required. 5. Click on the Add User option to add other user, is required. Note: If a user closes the browser without logging out, there will some delay in their name being removed from the list of active users. Recovering Forgotten User Passwords If a user forgets the password to their account, you need to: Delete the user s account Create a new account with identical name. This new account will inherit all the settings of the previous account but with the new password that you set. Page August, 2004

29 Increasing Performance and Scalability of RSM Web Gateway The default memory size for RSM Web Gateway on installation is 64 MB. With the default configuration, RSM Web Gateway will support up to 27 concurrent streams (equivalent to 3 clients showing a Three By Three layout, with Proxy streams via RSM Web Gateway). Streams that are not processed via RSM Web Gateway do not count towards in this figure. If a user is showing 2 three-by-three layouts in sequential mode, this counts as 18 streams, not 9 streams If the number of concurrent streams via RSM Web Gateway is predicted to exceed 27 streams, it is strongly recommended to change the default memory configuration of RSM Web Gateway. Allocate another 32 MB to the default of 64 MB for each additional 9 concurrent streams above 27. Number of streams Memory options 27 Streams Default is sufficient. 36 Streams -Xms96m Xmx96m 45 Streams -Xms128m Xmx128m 54 Streams -Xms160m Xmx160m 60 Streams -Xms192m Xmx192m The upper limit varies according to your system setup. To change the memory settings: 1. Click on Start->Programs->Apache Tomcat 5.0->Configure Tomcat 2. Click on the Java VM tab Page August, 2004

30 3. In the Java Options field, add the following to the end, after -Xrs optionally replacing 192 with the value suitable for your installation: -Xms192m Xmx192m 4. Click OK 5. Restart RSM Web Gateway: Start->Programs->Sony->RSM Web Gateway-> Stop RSM Web Gateway then Start->Programs->Sony->RSM Web Gateway-> Start RSM Web Gateway Page August, 2004

31 Chapter 5 Appendix Roles Once you have been authorised to use the RSM Web Client, you are assigned one or more of the following four roles: Standard user PTZ user User administrator RSM Web Client administrator The On-line Help provides help for the Standard User role and the PTZ User role. Whereas, help for the User administrator and the RSM Web Client administrator can be found in the RMS Web Client Administrator s Users Guide (this guide). This guide is available from the Admin Help option in the menu bar of RMS Web Client. Standard User Role If you are assigned a Standard User role you can: View Live Camera Feeds As a standard user you can view live camera feeds and can select any of the available cameras on the RSM Web Gateway. You can also assign a camera to a position on the layout used. These settings are saved between logins. By default, the live feed is obtained directly from the RSM Web Gateway. However, where the RSM Web Gateway is in a private network, the RSM Web Client may obtain the feed via the RSM Web Gateway using a proxy setting. You can also modify the properties of the live feed, such as the update speed, bandwidth and image quality. You can also choose to display the camera name and the local time on the position display. This is true for each position in a layout. Manage and Select Layouts Three layouts are available for live feeds: One by One, a single camera layout. Two by Two layout that provides four positions and a Three by Three which provides nine positions. You can predefine up to eight distinct layouts, with a camera assigned to each position in each layout. Each layout is saved with a unique name. You can also choose to view a single layout, or view a selection of layouts in a defined sequence, with the RMS Web Client automatically switching between layouts after a predetermined number of seconds (Sequential View). Page August, 2004

32 Recording playback If you are assigned the role of User or PTZ User you can select an individual camera and view the available recordings for this camera on a timeline. The date can be selected for inclusion on a position using a calendar. You can scroll forwards and backwards along the timeline and zoom in or out to see more or less detail. Recordings can be made manually or automatically (according to a particular schedule) or when triggered by a motion alarm. These recordings are colour coded according to the way in which they were recorded. You can select a point on a timeline and then click the "Play" button to play the recording for the camera specified at that time. The recording will play and automatically skip to the next available recording if there are gaps in the recording sequence. Pan, Tilt and Zoom (PTZ) User If you are assigned the PTZ role, you can carry out pan, tilt and zoom operations wherever it is supported by the camera. You will also be able to perform the standard user functions. As a PTZ user you can view live camera feeds and can select any of the available cameras. You can also assign a camera to a position on the layout used. These settings are saved between logins. When you are assigned the role PTZ role you can also use the Pan, Tilt and Zoom presets that are available from cameras that support these functions, such as the SNC-RZ30. User Administrator If you have been assigned the role of "User Administrator" you can: List all RMS Web Client users Add new users or delete existing users Change the roles of users. View list of users currently logged in. A description of each of the User Administrator activities and how to use them can be found in the appropriate sections of this guide. RSM Web Client Administrator If you have been assigned the role of RSM Web Client Administrator you can: List all RSM Web Gateways Add or remove RSM Web Gateways Modify configuration parameters A description of each of the RSM Web Client Administrator activities and how to use them can be found in the appropriate sections of this guide. Page August, 2004

RealShot Manager Compression Server software

RealShot Manager Compression Server software RealShot Manager Compression Server software User Guide Software Version 1.0 RealShot Manager 2004 Sony Corporation Copyright Notice 2004 Sony Corporation. All rights reserved. This manual may not be reproduced,

More information

AXIS Camera Station Quick Installation Guide

AXIS Camera Station Quick Installation Guide AXIS Camera Station Quick Installation Guide Copyright Axis Communications AB April 2005 Rev. 3.5 Part Number 23997 1 Table of Contents Regulatory Information.................................. 3 AXIS Camera

More information

Contents Notice to Users

Contents  Notice to Users Web Remote Access Contents Web Remote Access Overview... 1 Setting Up Web Remote Access... 2 Editing Web Remote Access Settings... 5 Web Remote Access Log... 7 Accessing Your Home Network Using Web Remote

More information

Web Remote Access. User Guide

Web Remote Access. User Guide Web Remote Access User Guide Notice to Users 2005 2Wire, Inc. All rights reserved. This manual in whole or in part, may not be reproduced, translated, or reduced to any machine-readable form without prior

More information

Intelligent Monitoring Configuration Tool

Intelligent Monitoring Configuration Tool Intelligent Monitoring Configuration Tool User Guide Software Version 1.0 and above EZPlugger 2004 Sony Corporation Copyright Notice 2004 Sony Corporation. All rights reserved. This manual may not be

More information

User Manual. Onsight Management Suite Version 5.1. Another Innovation by Librestream

User Manual. Onsight Management Suite Version 5.1. Another Innovation by Librestream User Manual Onsight Management Suite Version 5.1 Another Innovation by Librestream Doc #: 400075-06 May 2012 Information in this document is subject to change without notice. Reproduction in any manner

More information

INSTALLATION GUIDE. AXIS Camera Station

INSTALLATION GUIDE. AXIS Camera Station INSTALLATION GUIDE AXIS Camera Station About this Guide This guide is intended for administrators and users of the AXIS Camera Station, and is applicable for software release 3.50 and later. It covers

More information

Recording Server Monitoring Tool

Recording Server Monitoring Tool Recording Server Monitoring Tool Release Note Software Version 1.1.1 Revision 2 (Last Modified: October 10, 2013) 2013 Sony Corporation Copyright Notice This document may not be reproduced, translated

More information

Crystal Reports Installation Guide

Crystal Reports Installation Guide Crystal Reports Installation Guide Version XI Infor Global Solutions, Inc. Copyright 2006 Infor IP Holdings C.V. and/or its affiliates or licensors. All rights reserved. The Infor word and design marks

More information

Upgrading from Call Center Reporting to Reporting for Contact Center. BCM Contact Center

Upgrading from Call Center Reporting to Reporting for Contact Center. BCM Contact Center Upgrading from Call Center Reporting to Reporting for Contact Center BCM Contact Center Document Number: NN40010-400 Document Status: Standard Document Version: 02.00 Date: June 2006 Copyright Nortel Networks

More information

026-1010 Rev 7 06-OCT-2011. Site Manager Installation Guide

026-1010 Rev 7 06-OCT-2011. Site Manager Installation Guide 026-1010 Rev 7 06-OCT-2011 Site Manager Installation Guide Retail Solutions 3240 Town Point Drive NW, Suite 100 Kennesaw, GA 30144, USA Phone: 770-425-2724 Fax: 770-425-9319 Table of Contents 1 SERVER

More information

TANDBERG MANAGEMENT SUITE 10.0

TANDBERG MANAGEMENT SUITE 10.0 TANDBERG MANAGEMENT SUITE 10.0 Installation Manual Getting Started D12786 Rev.16 This document is not to be reproduced in whole or in part without permission in writing from: Contents INTRODUCTION 3 REQUIREMENTS

More information

Network DK2 DESkey Installation Guide

Network DK2 DESkey Installation Guide VenturiOne Getting Started Network DK2 DESkey Installation Guide PD-056-306 DESkey Network Server Manual Applied Cytometry CONTENTS 1 DK2 Network Server Overview... 2 2 DK2 Network Server Installation...

More information

VERITAS Backup Exec TM 10.0 for Windows Servers

VERITAS Backup Exec TM 10.0 for Windows Servers VERITAS Backup Exec TM 10.0 for Windows Servers Quick Installation Guide N134418 July 2004 Disclaimer The information contained in this publication is subject to change without notice. VERITAS Software

More information

Intel Unite Solution. Standalone User Guide

Intel Unite Solution. Standalone User Guide Intel Unite Solution Standalone User Guide Legal Disclaimers & Copyrights All information provided here is subject to change without notice. Contact your Intel representative to obtain the latest Intel

More information

Gómez Script Recorder

Gómez Script Recorder Gómez Script Recorder GETTING STARTED October 2003 Overview The Gómez Performance Network (GPN) measures Web page and transaction performance globally in real-time, enabling organizations to continuously

More information

DameWare Server. Administrator Guide

DameWare Server. Administrator Guide DameWare Server Administrator Guide About DameWare Contact Information Team Contact Information Sales 1.866.270.1449 General Support Technical Support Customer Service User Forums http://www.dameware.com/customers.aspx

More information

Pearl Echo Installation Checklist

Pearl Echo Installation Checklist Pearl Echo Installation Checklist Use this checklist to enter critical installation and setup information that will be required to install Pearl Echo in your network. For detailed deployment instructions

More information

Features Reference. About Unified Communication System. Before Using This Machine. Starting a Meeting. What You Can Do During the Meeting

Features Reference. About Unified Communication System. Before Using This Machine. Starting a Meeting. What You Can Do During the Meeting Features Reference About Unified Communication System Before Using This Machine Starting a Meeting What You Can Do During the Meeting Leaving a Meeting Managing Address Book Changing Network Configuration

More information

Intelligent Monitoring Configuration Tool

Intelligent Monitoring Configuration Tool Intelligent Monitoring Configuration Tool Overview Software Version 1.0 and above EZPlugger 2004 Sony Corporation Copyright Notice 2004 Sony Corporation. All rights reserved. This manual may not be reproduced,

More information

INSTALL AND CONFIGURATION GUIDE. Atlas 5.1 for Microsoft Dynamics AX

INSTALL AND CONFIGURATION GUIDE. Atlas 5.1 for Microsoft Dynamics AX INSTALL AND CONFIGURATION GUIDE Atlas 5.1 for Microsoft Dynamics AX COPYRIGHT NOTICE Copyright 2012, Globe Software Pty Ltd, All rights reserved. Trademarks Dynamics AX, IntelliMorph, and X++ have been

More information

Topaz Installation Sheet

Topaz Installation Sheet Topaz Installation Sheet P/N 460924001E ISS 08FEB12 Content Introduction... 3 Recommended minimum requirements... 3 Setup for Internet Explorer:... 4 Topaz installation... 10 Technical support... 14 Copyright

More information

http://docs.trendmicro.com

http://docs.trendmicro.com Trend Micro Incorporated reserves the right to make changes to this document and to the products described herein without notice. Before installing and using the product, please review the readme files,

More information

Reporting for Contact Center Setup and Operations Guide. BCM Contact Center

Reporting for Contact Center Setup and Operations Guide. BCM Contact Center Reporting for Contact Center Setup and Operations Guide BCM Contact Center Document Number: NN40040-302 Document Status: Standard Document Version: 04.00 Part Code: N0060637 Date: June 2006 Copyright 2005

More information

C-021-100-12(1) Monitor_Update. USER S GUIDE Version 1.1. 2014 Sony Corporation

C-021-100-12(1) Monitor_Update. USER S GUIDE Version 1.1. 2014 Sony Corporation C-021-100-12(1) Monitor_Update USER S GUIDE Version 1.1 2014 Sony Corporation Table of Contents Overview... 3 Features... 3 Supported Devices... 3 Computer Environment... 3 Preparation... 4 Installing

More information

Sharp Remote Device Manager (SRDM) Server Software Setup Guide

Sharp Remote Device Manager (SRDM) Server Software Setup Guide Sharp Remote Device Manager (SRDM) Server Software Setup Guide This Guide explains how to install the software which is required in order to use Sharp Remote Device Manager (SRDM). SRDM is a web-based

More information

PHD Virtual Backup for Hyper-V

PHD Virtual Backup for Hyper-V PHD Virtual Backup for Hyper-V version 7.0 Installation & Getting Started Guide Document Release Date: December 18, 2013 www.phdvirtual.com PHDVB v7 for Hyper-V Legal Notices PHD Virtual Backup for Hyper-V

More information

KViewCenter Software User Manual 2012 / 04 / 20 Version 2.2.1.0

KViewCenter Software User Manual 2012 / 04 / 20 Version 2.2.1.0 KViewCenter Software User Manual 2012 / 04 / 20 Version 2.2.1.0 Table of Contents Chapter 1. KViewCenter Interface... 5 1.1. Log in.... 5 1.2. Log out... 5 1.3. Control Panel... 6 1.4. Control Panel (Preview

More information

Virtual Learning Environment. Internet Explorer Browser Connectivity Troubleshooting

Virtual Learning Environment. Internet Explorer Browser Connectivity Troubleshooting Virtual Learning Environment Internet Explorer Browser Connectivity Troubleshooting This document is for Ultimate Software use only. No part of this document may be reproduced in any form or by any means,

More information

CompleteView Alarm Client User s Manual. Version 3.8

CompleteView Alarm Client User s Manual. Version 3.8 CompleteView Alarm Client User s Manual Version 3.8 Table Of Contents Introduction... 1 Overview... 2 System Requirements... 2 Configuration... 3 Starting the Alarm Client... 3 Menus... 3 File Menu...

More information

Symantec Backup Exec TM 11d for Windows Servers. Quick Installation Guide

Symantec Backup Exec TM 11d for Windows Servers. Quick Installation Guide Symantec Backup Exec TM 11d for Windows Servers Quick Installation Guide September 2006 Symantec Legal Notice Copyright 2006 Symantec Corporation. All rights reserved. Symantec, Backup Exec, and the Symantec

More information

Upgrading from Call Center Reporting to Reporting for Call Center

Upgrading from Call Center Reporting to Reporting for Call Center Upgrading from Call Center Reporting to Reporting for Call Center www.nortelnetworks.com 2003 Nortel Networks i Table of Contents Table of Contents Change History...1 How to use this guide...2 Introduction...

More information

Core Protection for Virtual Machines 1

Core Protection for Virtual Machines 1 Core Protection for Virtual Machines 1 Comprehensive Threat Protection for Virtual Environments. Installation Guide e Endpoint Security Trend Micro Incorporated reserves the right to make changes to this

More information

Release Date May 10, 2011. Adeptia Inc. 443 North Clark Ave, Suite 350 Chicago, IL 60654, USA

Release Date May 10, 2011. Adeptia Inc. 443 North Clark Ave, Suite 350 Chicago, IL 60654, USA Adeptia Suite 5.2 Installation Guide Release Date May 10, 2011 Adeptia Inc. 443 North Clark Ave, Suite 350 Chicago, IL 60654, USA Copyright Copyright 2000-2010 Adeptia, Inc. All rights reserved. Trademarks

More information

Installation Instructions Release Version 15.0 January 30 th, 2011

Installation Instructions Release Version 15.0 January 30 th, 2011 Release Version 15.0 January 30 th, 2011 ARGUS Software: ARGUS Valuation - DCF The contents of this document are considered proprietary by ARGUS Software, the information enclosed and any portion thereof

More information

CompleteView Alarm Client User Manual. CompleteView Version 4.3

CompleteView Alarm Client User Manual. CompleteView Version 4.3 CompleteView Alarm Client User Manual CompleteView Version 4.3 Table of Contents Introduction...1 Overview... 2 System Requirements... 2 Configuration...3 Starting the Alarm Client... 3 Menus... 3 File

More information

EXPRESSCLUSTER X for Windows Quick Start Guide for Microsoft SQL Server 2014. Version 1

EXPRESSCLUSTER X for Windows Quick Start Guide for Microsoft SQL Server 2014. Version 1 EXPRESSCLUSTER X for Windows Quick Start Guide for Microsoft SQL Server 2014 Version 1 NEC EXPRESSCLUSTER X 3.x for Windows SQL Server 2014 Quick Start Guide Document Number ECX-MSSQL2014-QSG, Version

More information

Quick Start Guide for VMware and Windows 7

Quick Start Guide for VMware and Windows 7 PROPALMS VDI Version 2.1 Quick Start Guide for VMware and Windows 7 Rev. 1.1 Published: JULY-2011 1999-2011 Propalms Ltd. All rights reserved. The information contained in this document represents the

More information

Lepide Active Directory Self Service. Installation Guide. Lepide Active Directory Self Service Tool. Lepide Software Private Limited Page 1

Lepide Active Directory Self Service. Installation Guide. Lepide Active Directory Self Service Tool. Lepide Software Private Limited Page 1 Installation Guide Lepide Active Directory Self Service Tool Lepide Software Private Limited Page 1 Lepide Software Private Limited, All Rights Reserved This User Guide and documentation is copyright of

More information

Quick Start Guide for Parallels Virtuozzo

Quick Start Guide for Parallels Virtuozzo PROPALMS VDI Version 2.1 Quick Start Guide for Parallels Virtuozzo Rev. 1.1 Published: JULY-2011 1999-2011 Propalms Ltd. All rights reserved. The information contained in this document represents the current

More information

SharpdeskTM R3.1. Installation Guide Version 3.1.01

SharpdeskTM R3.1. Installation Guide Version 3.1.01 SharpdeskTM R3.1 Installation Guide Version 3.1.01 1 Copyright 2000-2004 by Sharp Corporation. All rights reserved. Reproduction, adaptation or translation without prior written permission is prohibited,

More information

NTP Software File Auditor for Windows Edition

NTP Software File Auditor for Windows Edition NTP Software File Auditor for Windows Edition An NTP Software Installation Guide Abstract This guide provides a short introduction to installation and initial configuration of NTP Software File Auditor

More information

Lepide Software Asset Management

Lepide Software Asset Management Installation Guide Lepide Software Asset Management , All Rights Reserved This User Guide and documentation is copyright of Lepide Software Private Limited, with all rights reserved under the copyright

More information

Diamond II v2.3 Service Pack 4 Installation Manual

Diamond II v2.3 Service Pack 4 Installation Manual Diamond II v2.3 Service Pack 4 Installation Manual P/N 460987001B ISS 26APR11 Copyright Disclaimer Trademarks and patents Intended use Software license agreement FCC compliance Certification and compliance

More information

Trend ScanMail. for Microsoft Exchange. Quick Start Guide

Trend ScanMail. for Microsoft Exchange. Quick Start Guide Trend ScanMail for Microsoft Exchange Quick Start Guide Trend ScanMail for Microsoft Exchange ScanMail for Exchange This Quick Start Guide provides a step-by-step guide to installing ScanMail for Exchange,

More information

Client Program Installation Guide

Client Program Installation Guide Siku Quanshu (Wenyuange Edition) Online Subscription Services Client Program Installation Guide 1. System Requirements The minimum requirements of the Siku Quanshu (Wenyuange Edition) Online Subscription

More information

ivms-5200 Professional Web Manager User Manual

ivms-5200 Professional Web Manager User Manual ivms-5200 Professional Web Manager User Manual UD.6L0202D1651A01 Hikvision ivms-5200 Professional Web Manager User Manual This manual, as well as the software described in it, is furnished under license

More information

Legal Notes. Regarding Trademarks. 2013 KYOCERA Document Solutions Inc.

Legal Notes. Regarding Trademarks. 2013 KYOCERA Document Solutions Inc. Legal Notes Unauthorized reproduction of all or part of this guide is prohibited. The information in this guide is subject to change without notice. We cannot be held liable for any problems arising from

More information

IEI emerge and Milestone Systems Network Video Recorder. Setup and Integration Guide. Milestone Version 6.5 and emerge Version 3.

IEI emerge and Milestone Systems Network Video Recorder. Setup and Integration Guide. Milestone Version 6.5 and emerge Version 3. IEI emerge and Milestone Systems Network Video Recorder Setup and Integration Guide Milestone Version 6.5 and emerge Version 3.2 and above CONTENTS Requirements for Milestone NVR/IEI emerge Integration...

More information

http://docs.trendmicro.com

http://docs.trendmicro.com Trend Micro Incorporated reserves the right to make changes to this document and to the products described herein without notice. Before installing and using the product, please review the readme files,

More information

Backup Exec 15. Quick Installation Guide

Backup Exec 15. Quick Installation Guide Backup Exec 15 Quick Installation Guide 21344987 Documentation version: 15 PN: 21344987 Legal Notice Copyright 2015 Symantec Corporation. All rights reserved. Symantec, the Symantec Logo, the Checkmark

More information

Intelligent Monitoring Software

Intelligent Monitoring Software 4-130-105-15 (1) Intelligent Monitoring Software Installation Guide Software Version 1.4 and Later RealShot Manager Advanced 2008 Sony Corporation Table of Contents Copyright Notice... 2 Features of RealShot

More information

Scholastic Reading Inventory Installation Guide

Scholastic Reading Inventory Installation Guide Scholastic Reading Inventory Installation Guide For use with Scholastic Reading Inventory version 2.0.1 or later and SAM version 2.0.2 or later Copyright 2011 by Scholastic Inc. All rights reserved. Published

More information

SonicWALL Global Management System Installation Guide Entry Edition. Version 2.1

SonicWALL Global Management System Installation Guide Entry Edition. Version 2.1 SonicWALL Global Management System Installation Guide Entry Edition Version 2.1 Copyright Information 2001 SonicWALL, Inc. All rights reserved. Under the copyright laws, this manual or the software described

More information

VERITAS Backup Exec 9.1 for Windows Servers Quick Installation Guide

VERITAS Backup Exec 9.1 for Windows Servers Quick Installation Guide VERITAS Backup Exec 9.1 for Windows Servers Quick Installation Guide N109548 Disclaimer The information contained in this publication is subject to change without notice. VERITAS Software Corporation makes

More information

ACS CLIENT SOFTWARE USER MANUAL

ACS CLIENT SOFTWARE USER MANUAL ACS CLIENT SOFTWARE USER MANUAL 1 ACS USER GUIDE 1.1 System Requirement Recommended System Requirement OS CPU VGA RAM HDD WindowXP, Vista Pentium 4, 2Ghz 1024*768, 64MB 24bit color graphic card 1GB 20MB

More information

Web Enabled Software for 8614xB-series Optical Spectrum Analyzers. Installation Guide

Web Enabled Software for 8614xB-series Optical Spectrum Analyzers. Installation Guide for 8614xB-series Optical Spectrum Analyzers Installation Guide Copyright Agilent Technologies Company 2001 All Rights Reserved. Reproduction, adaptation, or translation without prior written permission

More information

XenClient Enterprise Synchronizer Installation Guide

XenClient Enterprise Synchronizer Installation Guide XenClient Enterprise Synchronizer Installation Guide Version 5.1.0 March 26, 2014 Table of Contents About this Guide...3 Hardware, Software and Browser Requirements...3 BIOS Settings...4 Adding Hyper-V

More information

IIS, FTP Server and Windows

IIS, FTP Server and Windows IIS, FTP Server and Windows The Objective: To setup, configure and test FTP server. Requirement: Any version of the Windows 2000 Server. FTP Windows s component. Internet Information Services, IIS. Steps:

More information

Dell Statistica 13.0. Statistica Enterprise Installation Instructions

Dell Statistica 13.0. Statistica Enterprise Installation Instructions Dell Statistica 13.0 2015 Dell Inc. ALL RIGHTS RESERVED. This guide contains proprietary information protected by copyright. The software described in this guide is furnished under a software license or

More information

ivms-4200 Client Software Quick Start Guide

ivms-4200 Client Software Quick Start Guide ivms-4200 Client Software Quick Start Guide Notices The information in this documentation is subject to change without notice and does not represent any commitment on behalf of HIKVISION. HIKVISION disclaims

More information

Symantec Backup Exec 2010 R2. Quick Installation Guide

Symantec Backup Exec 2010 R2. Quick Installation Guide Symantec Backup Exec 2010 R2 Quick Installation Guide 20047221 The software described in this book is furnished under a license agreement and may be used only in accordance with the terms of the agreement.

More information

Aspera Connect User Guide

Aspera Connect User Guide Aspera Connect User Guide Windows XP/2003/Vista/2008/7 Browser: Firefox 2+, IE 6+ Version 2.3.1 Chapter 1 Chapter 2 Introduction Setting Up 2.1 Installation 2.2 Configure the Network Environment 2.3 Connect

More information

Central Management System (CMS) USER MANUAL

Central Management System (CMS) USER MANUAL Central Management System (CMS) USER MANUAL LEGAL INFORMATION Reproduction, transfer, distribution or storage of part or all of the contents in this document in any form without the prior written permission

More information

Setting Up a Unisphere Management Station for the VNX Series P/N 300-011-796 Revision A01 January 5, 2010

Setting Up a Unisphere Management Station for the VNX Series P/N 300-011-796 Revision A01 January 5, 2010 Setting Up a Unisphere Management Station for the VNX Series P/N 300-011-796 Revision A01 January 5, 2010 This document describes the different types of Unisphere management stations and tells how to install

More information

SC-T35/SC-T45/SC-T46/SC-T47 ViewSonic Device Manager User Guide

SC-T35/SC-T45/SC-T46/SC-T47 ViewSonic Device Manager User Guide SC-T35/SC-T45/SC-T46/SC-T47 ViewSonic Device Manager User Guide Copyright and Trademark Statements 2014 ViewSonic Computer Corp. All rights reserved. This document contains proprietary information that

More information

Version 3.8. Installation Guide

Version 3.8. Installation Guide Version 3.8 Installation Guide Copyright 2007 Jetro Platforms, Ltd. All rights reserved. This document is being furnished by Jetro Platforms for information purposes only to licensed users of the Jetro

More information

IEI emerge and On-Net Surveillance Systems (OnSSI) Network Video Recorder Setup and Integration Guide

IEI emerge and On-Net Surveillance Systems (OnSSI) Network Video Recorder Setup and Integration Guide IEI emerge and On-Net Surveillance Systems (OnSSI) Network Video Recorder Setup and Integration Guide OnSSI Version 6.5 and IEI emerge Version 3.2 and above CONTENTS Requirements for OnSSI NVR/IEI emerge

More information

formerly Help Desk Authority 9.1.3 Upgrade Guide

formerly Help Desk Authority 9.1.3 Upgrade Guide formerly Help Desk Authority 9.1.3 Upgrade Guide 2 Contacting Quest Software Email: Mail: Web site: info@quest.com Quest Software, Inc. World Headquarters 5 Polaris Way Aliso Viejo, CA 92656 USA www.quest.com

More information

LOREX CLIENT Remote Software 4.0

LOREX CLIENT Remote Software 4.0 LOREX CLIENT Remote Software 4.0 Instruction Manual English Version 2.0 MODEL: L20WD800 Series www.lorexcctv.com Copyright 2008 LOREX Technology Inc. Table of Contents Table of Contents Software Installation...

More information

Disaster Recovery. Websense Web Security Web Security Gateway. v7.6

Disaster Recovery. Websense Web Security Web Security Gateway. v7.6 Disaster Recovery Websense Web Security Web Security Gateway v7.6 1996 2011, Websense, Inc. All rights reserved. 10240 Sorrento Valley Rd., San Diego, CA 92121, USA Published 2011 The products and/or methods

More information

FAS Asset Accounting FAS CIP Accounting FAS Asset Inventory SQL Server Installation & Administration Guide Version 2011.1

FAS Asset Accounting FAS CIP Accounting FAS Asset Inventory SQL Server Installation & Administration Guide Version 2011.1 FAS Asset Accounting FAS CIP Accounting FAS Asset Inventory SQL Server Installation & Administration Guide Version 2011.1 2011 Sage Software, Inc. All rights reserved. Published by Sage 2325 Dulles Corner

More information

LepideAuditor Suite for File Server. Installation and Configuration Guide

LepideAuditor Suite for File Server. Installation and Configuration Guide LepideAuditor Suite for File Server Installation and Configuration Guide Table of Contents 1. Introduction... 4 2. Requirements and Prerequisites... 4 2.1 Basic System Requirements... 4 2.2 Supported Servers

More information

Server Installation Guide ZENworks Patch Management 6.4 SP2

Server Installation Guide ZENworks Patch Management 6.4 SP2 Server Installation Guide ZENworks Patch Management 6.4 SP2 02_016N 6.4SP2 Server Installation Guide - 2 - Notices Version Information ZENworks Patch Management Server Installation Guide - ZENworks Patch

More information

Working Folder Linkage Setup Guide

Working Folder Linkage Setup Guide For models listed below, see the respective "Working Foloder Linkage Setup Guide". wfs-mfp-installguide-09_en.pdf - ApeosPort-IV C5570/C4470/C3371/C3370/C2270 - ApeosPort-IV C7780/C6680/C5580 - ApeosPort-IV

More information

Enterprise Manager. Version 6.2. Installation Guide

Enterprise Manager. Version 6.2. Installation Guide Enterprise Manager Version 6.2 Installation Guide Enterprise Manager 6.2 Installation Guide Document Number 680-028-014 Revision Date Description A August 2012 Initial release to support version 6.2.1

More information

Installation Guide v3.0

Installation Guide v3.0 Installation Guide v3.0 Shepherd TimeClock 4465 W. Gandy Blvd. Suite 800 Tampa, FL 33611 Phone: 813-882-8292 Fax: 813-839-7829 http://www.shepherdtimeclock.com The information contained in this document

More information

Alarm Client. Installation and User Guide. NEC NEC Infrontia Corporation. July 2008 NDA-30364, Revision 8

Alarm Client. Installation and User Guide. NEC NEC Infrontia Corporation. July 2008 NDA-30364, Revision 8 Alarm Client Installation and User Guide NEC NEC Infrontia Corporation July 2008 NDA-30364, Revision 8 Liability Disclaimer NEC Infrontia Corporation reserves the right to change the specifications, functions,

More information

Java. How to install the Java Runtime Environment (JRE)

Java. How to install the Java Runtime Environment (JRE) Java How to install the Java Runtime Environment (JRE) Install Microsoft Virtual Machine (VM) via System Check Install Sun Java Runtime Environment (JRE) via System Check Loading Java Applet Failed How

More information

Upgrading Your Web Server from ClientBase Browser Version 2.0 or Above to Version 2.1.1

Upgrading Your Web Server from ClientBase Browser Version 2.0 or Above to Version 2.1.1 Upgrading Your Web Server from ClientBase Browser Version 2.0 or Above to Version 2.1.1 Introduction Successful ClientBase Browser usage depends on proper hardware, setup and installation. This section

More information

Moxa Device Manager 2.0 User s Guide

Moxa Device Manager 2.0 User s Guide First Edition, March 2009 www.moxa.com/product 2009 Moxa Inc. All rights reserved. Reproduction without permission is prohibited. Moxa Device Manager 2.0 User Guide The software described in this manual

More information

User Manual. Version 1.0.0.0. Yeastar Technology Co., Ltd.

User Manual. Version 1.0.0.0. Yeastar Technology Co., Ltd. User Manual Version 1.0.0.0 Yeastar Technology Co., Ltd. Table of Contents 1 Introduction 3 2 Installing MySMS Software 4 3 Managing MySMS 9 3.1 Accessing MySMS 9 3.2 Multi-User Accounts 10 3.3 Managing

More information

Symantec LiveUpdate Administrator. Getting Started Guide

Symantec LiveUpdate Administrator. Getting Started Guide Symantec LiveUpdate Administrator Getting Started Guide Symantec LiveUpdate Administrator Getting Started Guide The software described in this book is furnished under a license agreement and may be used

More information

Installation Notes for Outpost Network Security (ONS) version 3.2

Installation Notes for Outpost Network Security (ONS) version 3.2 Outpost Network Security Installation Notes version 3.2 Page 1 Installation Notes for Outpost Network Security (ONS) version 3.2 Contents Installation Notes for Outpost Network Security (ONS) version 3.2...

More information

Installation & Activation Guide. Lepide Active Directory Self Service

Installation & Activation Guide. Lepide Active Directory Self Service Installation & Activation Guide Lepide Active Directory Self Service , All Rights Reserved This User Guide and documentation is copyright of Lepide Software Private Limited, with all rights reserved under

More information

Administrators Help Manual

Administrators Help Manual Administrators Help Manual Lepide Active Directory Self Service Lepide Software Private Limited Page 1 Administrators Help Manual for Active Directory Self-Service Lepide Active Directory Self Service

More information

Installing Oracle 12c Enterprise on Windows 7 64-Bit

Installing Oracle 12c Enterprise on Windows 7 64-Bit JTHOMAS ENTERPRISES LLC Installing Oracle 12c Enterprise on Windows 7 64-Bit DOLOR SET AMET Overview This guide will step you through the process on installing a desktop-class Oracle Database Enterprises

More information

CA Spectrum and CA Service Desk

CA Spectrum and CA Service Desk CA Spectrum and CA Service Desk Integration Guide CA Spectrum 9.4 / CA Service Desk r12 and later This Documentation, which includes embedded help systems and electronically distributed materials, (hereinafter

More information

WhatsUp Gold v16.3 Installation and Configuration Guide

WhatsUp Gold v16.3 Installation and Configuration Guide WhatsUp Gold v16.3 Installation and Configuration Guide Contents Installing and Configuring WhatsUp Gold using WhatsUp Setup Installation Overview... 1 Overview... 1 Security considerations... 2 Standard

More information

Partner. Sage Pastel. Accounting. Installation Guide

Partner. Sage Pastel. Accounting. Installation Guide Sage Pastel Accounting Partner Installation Guide Sage Pastel: +27 11 304 3000 Sage Pastel Intl: +27 11 304 3400 www.pastel.co.za www.sagepastel.com info@pastel.co.za info@sagepastel.com Sage Pastel Accounting

More information

Installation Guide: Delta Module Manager Launcher

Installation Guide: Delta Module Manager Launcher Installation Guide: Delta Module Manager Launcher Overview... 2 Delta Module Manager Launcher... 2 Pre-Installation Considerations... 3 Hardware Requirements... 3 Software Requirements... 3 Virtualisation...

More information

QUANTIFY INSTALLATION GUIDE

QUANTIFY INSTALLATION GUIDE QUANTIFY INSTALLATION GUIDE Thank you for putting your trust in Avontus! This guide reviews the process of installing Quantify software. For Quantify system requirement information, please refer to the

More information

Imaging License Server User Guide

Imaging License Server User Guide IMAGING LICENSE SERVER USER GUIDE Imaging License Server User Guide PerkinElmer Viscount Centre II, University of Warwick Science Park, Millburn Hill Road, Coventry, CV4 7HS T +44 (0) 24 7669 2229 F +44

More information

Interworks. Interworks Cloud Platform Installation Guide

Interworks. Interworks Cloud Platform Installation Guide Interworks Interworks Cloud Platform Installation Guide Published: March, 2014 This document contains information proprietary to Interworks and its receipt or possession does not convey any rights to reproduce,

More information

WebEx. Remote Support. User s Guide

WebEx. Remote Support. User s Guide WebEx Remote Support User s Guide Version 6.5 Copyright WebEx Communications, Inc. reserves the right to make changes in the information contained in this publication without prior notice. The reader should

More information

DVR4C Remote Viewer Operation Manual Table of Contents EN 3 1. OVERVIEW...5 1.1 MINIMUM PC REQUIREMENTS...5 2. INSTALLING THE PROGRAM...

DVR4C Remote Viewer Operation Manual Table of Contents EN 3 1. OVERVIEW...5 1.1 MINIMUM PC REQUIREMENTS...5 2. INSTALLING THE PROGRAM... DVR4x4RemoteViewer.book Page 3 Tuesday, February 15, 2005 9:19 AM DVR4C Remote Viewer Operation Manual Table of Contents EN 3 1. OVERVIEW...5 1.1 MINIMUM PC REQUIREMENTS...5 2. INSTALLING THE PROGRAM...5

More information

NetBak Replicator 4.0 User Manual Version 1.0

NetBak Replicator 4.0 User Manual Version 1.0 NetBak Replicator 4.0 User Manual Version 1.0 Copyright 2012. QNAP Systems, Inc. All Rights Reserved. 1 NetBak Replicator 1. Notice... 3 2. Install NetBak Replicator Software... 4 2.1 System Requirements...

More information

Quick Install Guide. Lumension Endpoint Management and Security Suite 7.1

Quick Install Guide. Lumension Endpoint Management and Security Suite 7.1 Quick Install Guide Lumension Endpoint Management and Security Suite 7.1 Lumension Endpoint Management and Security Suite - 2 - Notices Version Information Lumension Endpoint Management and Security Suite

More information

Projetex 9 Workstation Setup Quick Start Guide 2012 Advanced International Translations

Projetex 9 Workstation Setup Quick Start Guide 2012 Advanced International Translations Projetex 9 Workstation Setup Quick Start Guide 1 Projetex 9 Help Table of Contents Disclaimer 2 System Requirements 2 Registration/Upgrade 3 Projetex Workstation Setup 5 User Login to Projetex Workstation

More information

File Auditor for NAS, Net App Edition

File Auditor for NAS, Net App Edition File Auditor for NAS, Net App Edition Installation Guide Revision 1.2 - July 2015 This guide provides a short introduction to the installation and initial configuration of NTP Software File Auditor for

More information