See section Series II, JT for complete. information on this series.

Transcription

1 mphenol erospace I-- ircular onnect Overview igh peed I ilter rinted III iber Optics ransient ircuit oard yle rimp ear ontacts elease atrix atrix yle atrix 2 I II III mphenol onnects are ideally suited f the incpation of shielded contacts f high perfmance interconnection applications. he circular family is built around I-- specifications, with il-approved and commercial styles offered. mal operating voltage f circulars with power contacts only is up to 900 () at sea level. he I-- family offer these features f contact termination flexibility: Widest selection of insert arrangements that can incpate: ize 8 high speed Quadrax and ifferential winax contacts f I-- eries III (specially modified to accommodate keyed contacts) ransition adapters f use in attaching eries III connects with high speed quadrax differential contacts to boards ize 8, 12 and 16 oax contacts ize 8 and 12 winax contacts ize 8, 10 & 12 riax contacts Wide selection of connect shell styles and sizes coop-roof recessed design in -, - and - connects provide protection f contacts tandard power contacts are crimp rear release, qualified to oax, winax, and riax contacts employ the same retention system as power contacts, simplifying user substitution OI IOIO mphenol I--, which feature rear removable contacts, are nmally supplied with a full complement of power contacts, separately packaged. oax, twinax and triax contacts are dered by part number as referenced in the part number charts on the fol lowing pages of this catalog, and are substituted f the power contacts at the time of the cable equipment assembly. If the application is f coax, twinax triax contacts only, the connect may be dered less contacts and no power contacts will be supplied. OW O O OO I QY O elect the ircular eries desired. (ee features of each series given briefly on this page and in-depth in the other sections of this catalog, which are on-line at eries I - - onnects eries II - - onnects eries III - - onnects * - - onnects ee mphe-ite (Industrial type) atalog elect the quadrax, differential twinax, coax, twinax and/ triax contacts the transition adapters that are needed from the tables on the follow ing pages that crespond to the cable being used. elect the insert arrangement to accommodate required number of contacts. Insert patterns f quadrax and differential twinax contacts are on pages 387,388. Insert patterns f coax, twinax and triax contacts are on pages omplete the connect part number from the connect series catalog, incpating the chosen insert pattern number. ee detailed how to der page 389 f dering, eries III with quadrax and differential twinax contacts. onsult mphenol f assistance in dering circulars with coax, twinax and triax contacts. onsult mphenol erospace f dering infmation f connects with tail contacts, and f transition adapters. If connect is dered less contacts, power contacts and/ sealing plugs may be dered separately to fill out the insert arrangement. -, eries II ee section eries II, f complete infmation on this series. hter profile connect series f applica tions requiring maximum space savings ayonet coupling, crimp termination lso available in solder termination types under I eries II mphe-ite, ype ee atalog f complete infmation on this series. ommercial/industrial eries III type ost effective high perfmance connect f severe environments general duty industrial applications onsult mphenol Industrial Operations f further infmation catalog is on-line at www. amphenol-industrial.com. O: O: -, ri-tart, eries III igh perfmance capability series f both general duty and severe environment appli cations Offers the widest range of ubminiature am ily il-pec qualified options in contact and connect styles hreaded coupling; completely mates in one turn; crimp termination uperi I/ shielding effectiveness coop-proof design (recessed pins) vailable in aluminum, stainless steel and firewall, lightweight composite styles ee section eries III f complete infmation on this section supersedes I I-- supersedes I--. I supersedes I , eries I ee section eries I, f complete infmation on this series. coop-proof (recessed pins) ayonet coupling, crimp termination lso available in solder termination types under I eries II -, ype ee the section of this catalog. mphenol proprietary series (non-) which is a further expansion of the basic family, but incpates the scoop-proof design ompliant with several uropean specifications 376 ontact mphenol erospace f me infmation at

2 Quadrax ontacts, I--, eries III eneral escription mphenol erospace mphenol Quadrax ontacts -offer several advantages f high data transfer rates, low power consumption and excellent I compatibility: our strategically spaced inner contacts fm two Ohm matched impedance differential pairs Outer contact has rugged wall section f durability vailable in size 8 crimp termination style lso available in size 8 with tails (see page 379) equires modification of I-- connect to accommodate keyed contacts (4) OO IIO I Quadrax in with ack able Illustration - Quadrax ontact YI QX O O has socket outer contact with a socket inner contact YI QX I O has pin outer con tact with a pin inner contact Quadrax in ize 8 and I-- eries III onnect Quadrax in an ight Wire igabit thernet ssembly uggested train elief - Insert rrangements with Quadrax ontacts ue to the piggyback grommet interference with nmal strain reliefs on the shell size 9 only, the recommended strain relief f the connect is: mphenol part number W (O ad) (lectroless nickel) - shell size 9 only insert pattern, recommended backshell: lenair his is recommended due to the proximity of the size 8 contacts in relation to the shell..367 X..525 X. IY O lso see Quadrax contacts f I 600 and 27 ack and anel onnects on page 411 and 412. Quadrax ontacts are gold plated, crimp termination inish of mating contacts parts: supplied with min. gold over nickel on mating parts. onsult mphenol f availability of other finishes. Quadrax ize 8 ontact erfmance: andwidth: p to 3 igahertz ata ate: xceeding 3 bits/sec. oltage ating: 500 rms sea level ielectric Withstanding oltage: 1000 rms between all inner sea level, 500 rms between inner and outer sea level uggested umbering f Quadrax ontacts I O I OIIO Y ifferential airs, contacts 1-3, 2-4. O O I ee page 389 f part number dering of popularly used eries III connects with 100 ohm quadrax contacts. Quadrax differential pairs are 1and 3, 2 and III II I III 5015 atrix 2 atrix yle rimp ear elease atrix yle rinted ircuit oard I ilter ransient iber Optics igh peed ontacts ontact mphenol erospace f me infmation at

3 mphenol erospace Quadrax ontacts f I-- eries III, pplication ata igh peed I ilter rinted III iber Optics ransient ircuit oard yle rimp ear ontacts elease atrix atrix yle atrix 2 I II III - eries, I-- eries III* onnects able raka ileca , , ilotex 2236, ilotex 2870, I Wire , ensolite 23450/04090X-4() ensolite 24Q100, 24Q100-01, 24443/9025X-4(), 280W502-4, 24443/03130X-4(), 24443/20714X-4(), 24450/0120X-4(), 24-2Q100, YO - W-18664, O , 24443/03166X-4(), hermax , ic Wire 51424, hermax X100Q-24, 24Q (pace) ensolite 22Q100, 22Q100-01, hermax 956-5, O 7688 raka ileca , ensolite 26Q100, 26Q100-01, 26-2Q100, I raka ileca , e 8672 ensolite 24Q (same as ( ) -51, uses I iggyback) e 8513, Y18-3 ensolite 22Q100 pecial ox pattern, only mates with ( )-181 ensolite 24Q100, 24Q f 2.5 bps applications QX O O I - OO ontact art umber (ermination Instruction heet)** in (-2119-) (-2119-) (-2119-) (-2119-) (-2119-W) (-2119-) (-2119-) (-2119-) (-2119-) ocket (-2119-) (-2119-) (-2119-) (-2119-) (-2119-W) (-2119-) (-2119-) (-2119-) (-2119-) Impedance (Ohms) 100 Inner onduct (W) ontact ize 8 lectrical rotocol thernet, 1000 ase- igabit thernet thernet, 1000 ase- igabit thernet thernet (100 bps), 1000 ase- igabit thernet (1 bps) thernet (100 bps), 1000 ase- igabit thernet (1 bps) thernet (100 bps), 1000 ase- igabit thernet (1 bps) thernet (100 bps), 1000 ase- igabit thernet (1 bps) thernet (100 bps), 1000 ase- igabit thernet (1 bps) thernet (100 bps), 1000 ase- igabit thernet (1 bps) erial pplications (2.5 bps) 2 (28433/02171X-4) (480 bps) ensolite 24450/03089X-4() Y02-1, Y I 1394 irewire e 8487, Y I 1394 irewire ensolite 24450/03089X-4() ame as ( )-211 but ox pattern, mates with ( )-241 only ensolite 26473/02006X-4()/e 8328 (not f new designs, use /1 series) OI O X I 1394 irewire I 1394 irewire (-2119-) (-2119-) QX O ontacts are inserted by hand. efer to termination instructions listed. ontacts are removed with a removal tool. ecommended tool is I-I-81969/14-06, aniels efer to termination instructions listed. inish of mating contact parts: ontact part numbers shown in the chart above are sup plied gold plated per 488 ype II, ode, min. thick over nickel plate per -QQ--290, lass 2, / thick rimping ools Inner ontact 22520/2-01 with ositioner 22520/2-37 with aniels ositioner 709 Outer ontact 22520/5-01 with ie et 22520/5-45 (ocation ) O OI: xample number given in chart should be dered as ; example number should be dered as dding Zeros is necessary f mphenol dering process on all contact numbers aniels crimping tools are available from aniels fg. p nno ve., Orlando, * equires modified connect to accommodate keyed contacts. **ermination instructions are packaged with each contact and can be found on-line at: onsult mphenol erospace f current release of this contact instruction sheet if applicable. est repts available f indicated protocols. onsult mphenol erospace. 378 ontact mphenol erospace f me infmation at

4 Quadrax ontacts, I--, eries III pplication ata mphenol erospace - eries, I-- eries III* onnects able ensolite 26473/02006X-4() ame as /5-31 but box pattern (not f new designs, use /1 series) ensolite 26473/02006X-4(), e 8328 ensolite 26473/02006X-4(), e 8328 (same as /1-1 except box pattern. ates with /1-11 only. QX O O I - OO ontact art umber (ermination Instruction heet)** in ocket (-2119-W) (-2119-W) Impedance (Ohms) QX O O I - OO Quadrax ontact art umber Impedance ontacts in ocket (Ohms) (1.035 ength) re-tinned tails (.866 ength) ight ngle, inner contacts box pattern (.494 ength) re-tinned tails (1.194 ength) re-tinned tails (.859 ength) (.741 ength) (1.035 ength) (.836 ength) (1.035 ength) re-tinned tails (1.035 ength) mates to series (1.035 ength) mates to series (.815 ength) mates to series (.815 ength) mates to series (.815 ength) re-tinned tails, mates to series (.815 ength) re-tinned tails, mates to series ength) mates to series (.866 ength) mates to series (.494 ength) mates to series (.494 ength) mates to series (.840 ength) re-tinned tails (.780 ength) re-tinned tails (.840 ength) re-tinned tails (.708 ength) (.605 ength) (.494 ength) (.741 ength) (.806 ength) (.940 ength) (.939 ength) (.672 ength) (.914 ength) (.866 ength) (.901 ength) (.871 ength) (1.169 ength) Inner onduct (W) ontact ize 8 ontact ize 8 lectrical rotocol ibre-hannel (1, 2, 1/2), 1000 ase-x (1.25 ), I-2 (3.2 ) ibre-hannel (1, 2, 1/2), 1000 ase-x (1.25 ), I-2 (3.2 ) I ealing lugs f use with onnects using Quadrax ontacts - ize 8 avities tandard lastic tandard lastic to be used with tails (shter tail length) etal sealing plug - can be used when mating with contacts on mating half etal sealing plug used with s and mating contact on mating half IY O rommet f use with onnects using Quadrax ontacts rimping ools Inner ontact 22520/ /2-37 with aniels ositioner 709 Outer ontact 22520/5-01 with ie et 22520/5-45 (ocation ) O OI: xample number given in chart above should be dered as ; example number given in chart at left should be dered as dding Zeros is necessary f mphenol dering process on all contact numbers aniels crimping tools are available from aniels fg. p nno ve., Orlando, * equires modified connect to accommodate keyed contacts. **ermination instructions are packaged with each contact and can be found on-line at: onsult mphenol erospace f current release of this contact instruction sheet if applicable. est repts available f indicated protocols. onsult mphenol erospace. art umber Q Q2 art umber etallized piggyback grommet Indicated length given in chart at left is the distance from the rear of the contact retention shoulder to the tip of the tails. II I O III II I III 5015 atrix 2 atrix yle rimp ear elease atrix yle rinted ircuit oard I ilter ransient iber Optics igh peed ontacts ote: it does not indicate stickout length when installed in connect. ontact mphenol erospace f me infmation at

5 mphenol erospace ifferential winax ontacts, I-- eries III, eneral escription igh peed I ilter rinted III iber Optics ransient ircuit oard yle rimp ear ontacts elease atrix atrix yle atrix 2 I II III mphenol ifferential winax ontacts - Offer several advantages f high data transfer rates, low power consumption and excellent I compatibility: wo strategically spaced inner contacts fm two Ohm matched impedance differential pairs Outer contact has rugged wall section f durability vailable in size 8 crimp termination style lso available in size 8 with tails (see page 381) equires modification of I-- connect to accommodate keyed contacts (2) OO IIO I able Illustration - ifferential winax ontact ifferential winax ocket ontact ifferential winax in ontact YI II WIX O O has socket outer contact with a socket inner contact YI II WIX I O has pin outer con tact with a pin inner contact ifferential winax ontacts are old plated, rimp ermination inish of mating contacts parts: supplied with min. gold over nickel on mating parts. onsult mphenol f availability of other finishes. ifferential winax ize 8 ontact erfmance: andwidth: p to 3 igahertz ata ate: xceeding 3 bits/sec. oltage ating: 500 rms sea level ielectric Withstanding oltage: 1000 rms between all inner sea level 500 rms between inner and outer sea level uggested umbering f ifferential winax ontacts OIIO Y I O I O O I 380 ontact mphenol erospace f me infmation at

6 ifferential winax ontacts, I-- eries III, pplication ata mphenol erospace - eries, I-- eries III* onnects able ensolite 24463/05099X-8(), hermax X , ensolite 24463/9025X-2(), hermax 12814, (98 Ohm), 26463/70460X- 2 (98 Ohm), I 10224, ileca , (pace), 280W502-1 O ensolite 26453/03184X-2(), hermax Z, O /05114X-2(), I 1024 aychem , 17/ (77 Ohm) Y11-24, ensolite 24463/ (), hermax W502-6, ensolite 24463/9026X-2() ensolite 26483/03071X-2() ensolite 26483/03071X-2() II WIX O O I - OO ontact art umber (ermination Instruction heet)** in (-2119-) *** (-2119-Y) (-2119-) (-2119-) (-2119-) (-2119-) (-2119-) (-2119-) (-2119-X) ocket (-2119-) *** (-2119-Y) (-2119-) (-2119-) (-2119-) (-2119-) (-2119-) (-2119-) (-2119-X) Impedance (Ohms) ontact ize 8 lectrical rotocol thernet, ibre hannel, 1000 ase-x thernet rimping ools Inner ontact 22520/ /2-37 with aniels ositioner 709 Outer ontact 22520/5-01 with ie et 22520/5-45 (ocation ) III II I III 5015 atrix 2 atrix yle rimp ear elease atrix yle II WIX O O I - OO Quadrax ontact art umber ontacts in ocket (1.035 ength) (.788 ength) (.494 ength) (.939 ength) (.780 ength) (.871 ength) (.937 ength) (1.035 ength) (.843 ength) (.806 ength) (.908 ength) (.530 ength) (.819 ength) (1.035 ength) (1.035 ength) mates to /57 series Impedance (Ohms) II WIX O ontacts are inserted by hand. efer to termination instructions listed. ontacts are removed with a removal tool. ecommended tool is I-I-81969/14-06, aniels efer to termination instructions listed. 100 ontact ize inish of mating contact parts: ontact part numbers shown in the chart above are sup plied gold plated per 488 ype II, ode, min. thick over nickel plate per -QQ--290, lass 2, / thick O OI: xample number given in chart above should be dered as ; example number given in chart left should be dered as dding Zeros is necessary f mphenol dering process on all contact numbers aniels crimping tools are available from aniels fg. p nno ve., Orlando, * equires modified connect to accommodate keyed contacts. *** Indicated contact is vacuum degassed est repts available f indicated protocols. onsult mphenol erospace. **ermination instructions are packaged with each contact and can be found on-line at: onsult mphenol erospace f current release of this instruction sheet. Indicated length given in chart at left is the distance from the rear of the contact retention shoulder to the tip of the tails. II I O ote: it does not indicate stickout length when installed in connect. rinted ircuit oard I ilter ransient iber Optics igh peed ontacts ontact mphenol erospace f me infmation at

7 igh peed I ilter rinted III iber Optics ransient ircuit oard yle rimp ear ontacts elease atrix atrix yle atrix 2 I II III mphenol erospace mphenol Quadrax ontacts f rinted ircuit oard ttachment- vailable f I-- eries III ircular connects with straight tail termination and with compliant pin termination. hese provide the ideal solution f bringing high speed data transmission to the board ompliant Quadrax ontacts and ail Quadrax ontacts f ttachment to oards eneral escription ompliant in Quadrax and ail Quadrax ontacts mphenol Quadrax ontacts f ectangular oard evel onnects - Incpate the same size 8 Quadrax contacts as used in circular connects. ize 8 Quadrax ompliant contacts with hole diameters:.025 ±.002 Quadrax contact.040 ±.003 shell grounding ccommodates backplane.125 inch min. thickness onsult mphenol erospace f availability of additional connect configurations 4 OIIO O OO WI QX OIIO O OO WI QX I--, I III OO WI I O. his arrangement has 8 Quadrax tail contacts. I--, I III OO WI I O. his arrangement has 33 size 22 and 2 Quadrax tail contacts. ompliant in Quadrax oard evel onnect ontact mphenol erospace f me infmation at

8 Quadrax ransition dapters and ifferential winax ransition dapters eneral escription mphenol ransition dapters - re used to facilitate launching of controlled impedance signals to printed circuit boards. mphenol provides transition adapters in both contact types: Quadrax transition adapters, 90 straight receptacles threaded cable to board style ifferential twinax transition adapters, 90 straight receptacles, threaded cable to board style 90 Quadrax eceptacle and lug ransition dapter uggested umbering f ransition dapters with Quadrax ontacts IIO I OIIO Y 90 ifferential winax eceptacle and lug ransition dapter IIO inish of mating contact parts: ontacts are sup plied gold plated per 488 ype II, ode, min. thick over nickel plate per -QQ--290, lass 2, / thick IIO I 1 2 QX IIO lug QX IIO 90 mphenol erospace I OOO O QX IIO art umber eceptacle Impedance (Ohms) lectrical rotocol thernet, gigabit ther thernet, gigabit ther thernet, gigabit ther thernet, gigabit ther lug (90 degree) (90 degree) (90 degree) (straight) thernet, gigabit ther (90 degree) (90 degree) 1000 ase X, ibre channel (90 degree) 1000 ase X, (jam nut) (straight) (90 degree) 150 ibre channel I OOO O II WIX IIO art umber eceptacle Impedance (Ohms) lectrical rotocol thernet (90 degree) (90 degree) thernet (90 degree) (90 degree) (90 degree) (90 degree) (90 degree) (90 degree) (90 degree) (90 degree) (90 degree) onsult mphenol erospace f current release of this adapter. est repts available f indicated protocols; consult mphenol erospace. III II I III 5015 atrix 2 atrix yle rimp ear elease atrix yle rinted ircuit oard I ilter ransient iber Optics igh peed ontacts ontact mphenol erospace f me infmation at

9 igh peed I ilter rinted III iber Optics ransient ircuit oard yle rimp ear ontacts elease atrix atrix yle atrix 2 I II III mphenol erospace Quadrax ype dapter/ able ail ength Quadrax lug dapter/ ensolite 24Q100 Quadrax lug dapter/ ensolite 22Q100, 22Q100-01, hermax Quadrax lug dapter/ raka ileca , Quadrax lug dapter/ 26Q100 Quadrax lug dapter/ exnut with ock Wire oles ensolite 24Q100 Quadrax eceptacle traight dapter in-line jam nut (threaded)/ Quadrax eceptacle traight dapter in-line (threaded)/ 24Q100 Quadrax eceptacle 90 egree dapter/ ail ength.110 Quadrax eceptacle 90 egree dapter/ ail ength.200 Quadrax eceptacle traight dapter/ ail ength.110 Quadrax eceptacle traight dapter/ pecial ail ength (.200) Quadrax eceptacle 90 degree dapter with cable to board/ 24Q100 Quadrax eceptacle 90 degree dapter with cable to board/ Quadrax eceptacle traight dapter with cable to board/ 24Q100 ating plugs and receptacles Wired to board Quadrax ransition dapters f ttachment to oards pplication ata 100 O QX IIO O I OO I I O O Illustration of dapter O OI: xample number given in chart should be dered as ; example number should be dered as dding Zeros is necessary f mphenol dering process on all contact numbers. aniels crimping tools are available from aniels fg. p nno ve., Orlando, art umber ating (ermination Instruction heet)** Impedance rimping ools hread (Ohms) lug eceptacle ize Inner ontact Outer ontact (-2119-) (-2119-W) (-2119-Y) (-2119-) (-2119-) (-2119-) (-2119-) (-2119-) / /2-37 with aniels ositioner / /2-37 with aniels ositioner /5-01 with ie et 22520/5-45 (ocation ) 22520/5-01 with ie et 22520/5-45 (ocation ) ** ermination instructions are packaged with each contact and can be found on-line at: onsult mphenol erospace f current release of this adapter and instruction sheet if applicable. ee electrical protocols f transition adapters on page ontact mphenol erospace f me infmation at

10 Quadrax ransition dapters ttachment to oards pplication ata Quadrax ype dapter/ able ail ength Quadrax lug dapter/ ensolite 26473/02006X-4(), e 8328 Quadrax eceptacle 90 egree dapter/ ail ength.110 Quadrax eceptacle traight dapter/ ail ength.110 Quadrax eceptacle traight dapter in-line am ut (threaded) ensolite 26473/02006X-4 (), e 8328 Quadrax eceptacle 90 degree dapter with cable to board/ ensolite 26473/02006X-4 Quadrax eceptacle traight dapter with cable to board/ ensolite 26473/02006X-4 () ating plugs and receptacles Wired to board O OI: xample number given in chart should be dered as ; example number should be dered as dding Zeros is necessary f mphenol dering process on all contact numbers. aniels crimping tools are available from aniels fg. p nno ve., Orlando, O QX IIO O I OO I I O O Illustration of dapter mphenol erospace art umber ating (ermination Instruction heet)** Impedance rimping ools hread (Ohms) lug eceptacle ize Inner ontact Outer ontact (-2119-) (-2119-Y) (-2119-I) (-2119-) / / / / /5-01 with ie et 22520/5-45 (ocation ) ** ermination instructions are packaged with each contact and can be found on-line at: onsult mphenol erospace f current release of this adapter and instruction sheet if applicable. ee electrical protocols f transition adapters on page 383. III II I III 5015 atrix 2 atrix yle rimp ear elease atrix yle rinted ircuit oard I ilter ransient iber Optics igh peed ontacts ontact mphenol erospace f me infmation at

11 mphenol erospace ifferential winax ransition dapters f ttachment to oards - pplication ata igh peed I ilter rinted III iber Optics ransient ircuit oard yle rimp ear ontacts elease atrix atrix yle atrix 2 I II III ifferential winax ype dapter/ able ail ength ifferential winax lug dapter/ 17/ (77 ohms) ifferential winax lug dapter/ ensolite 24463/9025X-2() ifferential winax eceptacle 90 egree dapter/ ail ength.110 ifferential winax eceptacle traight dapter/ ail ength.110 ifferential winax eceptacle traight dapter/ ail ength.165 ifferential winax lug dapter/ensolite (120 Ohm) ifferential winax eceptacle 90 degree dapter/ ail ength.283 ifferential winax eceptacle traight dapter/ ail ength.283 ifferential winax eceptacle 90 degree dapter (low profile) with cable to board/ ensolite 24463/9026X-2 ifferential winax eceptacle 90 degree dapter with cable to board/ ensolite 24463/9025X-2 ifferential winax eceptacle 90 degree dapter with cable to board/ensolite 24463/9025X-2 ifferential winax ype dapter/ able ail ength ifferential winax lug dapter/ ensolite 26483/03071X-2 ifferential winax eceptacle 90 egree dapter/ ail ength.110 ifferential winax eceptacle traight dapter/ ail ength.110 ifferential winax eceptacle 90 degree dapter with cable to board/ ensolite 26483/03071X O II WIX IIO O I OO I I O O ating plugs and receptacles ating plugs and receptacles Wired to board Illustration of dapter art umber ating (ermination Instruction heet)** Impedance rimping ools hread (Ohms) lug eceptacle ize Inner ontact Outer ontact (-2119-) (-2119-) (-2119-) (-2119-) (-2119-) / 150 O II WIX IIO O I OO I I O O ating plugs and receptacles Wired to board Illustration of dapter 22520/2-01 with ositioner 22520/2-34 / 22520/2-01 with ositioner 22520/2-34 / 22520/2-01 with ositioner 22520/ /5-01 with ie et 22520/5-05 (ocation ) / 22520/5-01 with ie et 22520/5-45 (ocation ) / 22520/5-01 with ie et 22520/5-45 (ocation ) art umber ating (ermination Instruction heet)** Impedance rimping ools hread (Ohms) lug eceptacle ize Inner ontact Outer ontact (-2119-) 22520/2-01 with ositioner 22520/ /5-01 with ie et 22520/5-45 (ocation ) / / / / (-2119-) 150 / 22520/2-01 with ositioner 22520/ /5-01 with ie et 22520/5-45 (ocation ) O OI: xample number given in chart should be dered as ; example number should be dered as dding Zeros is necessary f mphenol dering process on all contact numbers. ** ermination instructions are packaged with each contact and can be found on-line at: onsult mphenol erospace f current release of this adapter and instruction sheet if applicable. ee electrical protocols f transition adapters on page ontact mphenol erospace f me infmation at

12 Insert rrangements - I--, eries III Incpating Quadrax & ifferential winax ontacts mphenol erospace his illustrated list ing represents the most readily available patterns incpating quadrax and differential twinax contacts within, eries III connects. If you require other arrangements than what are shown here, consult mphenol f further availability. In most cases, unless otherwise stated, size 8 cavities can be filled with quadrax differential twinax contacts. rrangements can be mixed with any size 8 coax, and/ concentric twinax triax contacts. ront face of pin inserts illustrated III II I Insert rrangement umber of ontacts ontact ize winax rounded eets oeing pecification III 5015 atrix 2 atrix yle rimp ear elease atrix O f 16 1 W h g Insert rrangement umber of ontacts ontact ize Insert rrangement umber of ontacts ontact ize yle rinted ircuit oard I ilter ransient iber Optics igh peed ontacts Quadrax ifferential winax ontact mphenol erospace f me infmation at

13 mphenol erospace Insert rrangements - f I-- Incpating Quadrax & ifferential winax ontacts igh peed I ilter rinted III iber Optics ransient ircuit oard yle rimp ear ontacts elease atrix atrix yle atrix 2 I II III ront face of pin inserts illustrated q p r s W z n m y k h t X u Y v Z a b w c d x e g f Z a Y b c d q r s e w t p f n v u g k m h Insert rrangement umber of ontacts ontact ize Insert rrangement umber of ontacts ontact ize X 1 4 round plane only W O X Y Z W Quadrax ifferential winax 388 ontact mphenol erospace f me infmation at

14 ow to Order, eries III ircular With Quadrax 100 Ohm ontacts mphenol erospace mphenol ri-tart, eries III* onnects can be dered with the following popularly used Quadrax contacts: 100 ohm quadrax socket contacts 100 ohm quadrax pin contacts se the following coded number dering procedure : onnect ype hell ype ervice lass hell ize Insert rrangement ontact ype lternate eying osition 00 QW tep 1. elect a onnect ype ri-tart eries onnect with metal shells ack panel mounted receptacle with metal shells ri-tart eries onnect with composite shells ack panel mounted receptacle with composite shells tep 2. elect a hell tyle 00 Wall mount receptacle 02 ox mount receptacle available only with the tails and epoxy backfilled (non-removable) 06 traight plug 07 am nut receptacle tep 3. elect a ervice lass with Quadrax Q Q QW QW Q Q Q Q Q Q lectroless nickel plated aluminum lectroless nickel plated ground plane aluminum Olive drab cadmium plate Olive drab cadmium plated ground plane aluminum ilronze ilronze ground plane rosion resistance stainless steel tainless steel ground plane urmalon plated, ickel- alternative to cadmium roundplane urmalon tep 4. elect a hell ize and Insert rrangement ee insert arrangements available with quadrax contacts on preceding pages. hell ize and Insert rrangements are together in one chart. irst number represents hell ize, second number is the Insert rrangement tep 5. elect ontact ype in contacts ocket contacts tep 6. elect an lternate eying osition ocksmith keying rotation of min keys. ee eries III lternate ositions below not required f nmal position ri-tart lternate ositions plug with a given rotation letter will mate with a receptacle with the same rotation letter. he angles f a given connect are the same whether it contains pins sockets. Inserts are not rotated in conjunction with the master key/keyway. hell ize 9 11, 13, and and 19 21, 23, and 25 25, 33, and 37 ey & eyway rrangement Identification etter dering of connects with any other quadrax contacts differential twinax contacts, please consult mphenol erospace f part numbers. I YWY (front face shown) I YWY (front face shown) III II I III 5015 atrix 2 atrix yle rimp ear elease atrix yle rinted ircuit oard I ilter ransient iber Optics igh peed ontacts * he incpation of quadrax differential twinax contacts requires a modified connect to accommodate keyed contacts. me infmation on ri-tart, I-- eries III connects see the section in this catalog. ontact mphenol erospace f me infmation at

15 mphenol erospace oaxial ontacts f I-- eneral escription igh peed I ilter rinted III iber Optics ransient ircuit oard yle rimp ear ontacts elease atrix atrix yle atrix 2 I II III mphenol oaxial ontacts -Offer several advantages f reliable interconnection and continued perfmance: arge crimping area assures low contact resistance and high tensile strength ack insulat positively captivates inner contact against axial loads ront insulat provides closed entry f socket inner contact ecessed inner contact is protected Outer contact has rugged wall section f durability YI II OX O O has socket outer contact with a pin inner contact I-- -, -, -, - ype, oax ize 12 ocket ssembled ontact I-- -, -, -, - ype, oax ize 16 in nassembled ontact I-- -, -, -, - ype, oax ize 8 in ssembled ontact YI II OX I O has pin outer contact with a socket inner contact acket raid Insulation enter onduct able Illustration - oax ontact oax ontacts are gold plated, crimp termination inish of mating contacts parts: supplied with min. gold over nickel on mating parts. Other finishes are available; consult mphenol f further infmation. oax ize 12 & 16 ontact erfmance: ypical W: 1.5:1 maximum up to 700 z and 500 z respec tively, f properly cabled size 12 and 16 coaxial contacts in the eries I, II and III Insulation esistance: 5,000 megohms 25 ielectric Withstanding oltage: ize 12: 1,000 sea level, ,000 ft. ize 16: 800 sea level, ,000 ft. ontact esistance: ee I /27, /28, /75, /76, /77, /78 oax ize 8 ontact erfmance: ypical W when terminated to specified 50 ohm cable: 1.5:1 maximum up to 3 z (excluding /2-27) Insulation esistance: 5,000 megohms 25 ielectric Withstanding oltage: 1,300 sea level, ,000 ft. ontact esistance: ee I /59, /60 I-- -, -, -, - ype, oax ize 8 ocket nassembled ontact 390 ontact mphenol erospace f me infmation at

16 oaxial ontacts f I-- pplication ata mphenol erospace - eries, I-- eries II, (27, 28, 76, 78) able -178/, -196/ aveg , , ensolite 24713/9551, 26723/ 9551 aveg /, -188/, -161/, -187/, -316/, -179/, aveg , imes (-179) 3248, eledyne /, -195/, aychem aychem aychem aychem e W1159 OX O O I - OO ontact art umber (ermination Instruction heet)** ontact ize rimping ools Installation ools in ocket Inner ontact rimp errule Insertion emoval (39029/76-425) (-2035-) (-2035-) (-2035-) (39029/76-424) (-2035-) (39029/28-211) (-2035-) (39029/28-409) (-2035-) (-2035-) (-2035-) (-2035-) (-2035-X) (39029/78-433) (-2035-) (-2035-) (-2035-) (39029/78-432) (-2035-) (39029/27-210) (-2035-) (39029/27-402) (-2035-) (-2035-) (-2035-) (-2035-) (-2035-Y) / /2-35 with aniels ositioner / /2-34 with aniels ositioner / / / /31-02 aniels -200 ool 2330 I-- O ll contacts mate with other contacts in this series which have the same inner and outer contact diameters. O OI: xample number given in chart should be dered as dding Zeros is necessary f mphenol dering process on all contact numbers onsult mphenol erospace f current release of this contact instruction sheet if applicable. O: supersedes I **ermination instructions are packaged with each contact and can be found on-line at: xample:,,, mphe-ite xample: ocket on -196/ cable will mate with pin on -188/ cable which is used in both this and the - series. ocket on -196/ cable will mate with pin on -188/cable which is used in both this and the - series. inish of mating contact parts: ontact part numbers shown in the chart above are sup plied with min. gold (noop hardness ) over nickel on mating parts. Other finishes are available; consult mphenol. aniels crimping tools are available from: aniels fg. p nno ve., Orlando / /14-03 mphenol / /14-04 mphenol / /14-03 mphenol / /14-04 mphenol III II I III 5015 atrix 2 atrix yle rimp ear elease atrix yle rinted ircuit oard I ilter ransient iber Optics igh peed ontacts ontact mphenol erospace f me infmation at

17 mphenol erospace oaxial ontacts f I-- pplication ata, cont. igh peed I ilter rinted III iber Optics ransient ircuit oard yle rimp ear ontacts elease atrix atrix yle atrix 2 I II III -, I-- eries I; -, I-- eries III; mphe-ite and - eries, (28, 59, 60, 75, 76, 77) able -178/, -196/ aveg , , ensolite 24713/9551, 26723/9551 aveg /, -188/, -316/, -161/ -187/, -179/, aveg , imes (-179) 3248, eledyne /, -195/, aychem aychem aychem aychem aychem e W1159, exans 179- /-om /, -179/, -174/, -188/, -316/, -161/ aveg , imes (-179)3248, eledyne /, -223/ OX O O I -, -, -I - OO ontact art umber ontact ize rimping ools Installation ools in ocket Inner ontact rimp errule Insertion emoval (39029/76-425) (-2035-) (-2035-) (-2035-) (39029/76-424) (-2035-) (39029/28-211) (-2035-) (39029/28-409) (-2035-) (-2035-) (-2035) (-2035-) (-2035-) (-2035-X) (-2035-) (-1107-) * (-1107-) (39029/77-429) ( (-2035-) (-2035-) (39029/77-428) (-2035-) (39029/75-416) (-2035-) (39029/75-417) (-2035-) (-2035-) (-2035-) (-2035-W) (-2035-) (-2035-Z) (-2035-) (-1107-) * (-1107-) O: supersedes I II OO: Italicized letters in parenthesis that follow positioner part num bers indicate applicable die closure. ommercial equivalents with the same die clo sure dimension may be used. OI O X / /2-35 with aniels ositioner / /2-34 with aniels ositioner / /2-31 solder 22520/ / / /31-02 aniels -200 ool /5-01 with die set 22520/5-03 () 22520/5-08 () 22520/5-35 () 22520/10-01 with ie et 22520/10-05 () 22520/5-01 with die set 22520/5-05 () 22520/5-19 () 22520/10-01 with ie et 22520/10-07 () 81969/ /14-03 mphenol / /14-04 mphenol and inserted 81969/ /14-03 mphenol / /14-04 mphenol O OI: xample number given in chart should be dered as ; example number should be dered as dding Zeros is necessary f mphenol dering process on all contact numbers onsult mphenol erospace f current release of this contact instruction sheet if applicable. When inner contact is installed by crimping only xpander ool it must be used to assemble rear insulat over contact. **ermination instructions are packaged with each contact and can be found on-line at: ontact mphenol erospace f me infmation at

18 oaxial ontacts f I-- pplication ata, cont. mphenol erospace -, I-- eries I; -, I-- eries III; mphe-ite and - eries, (28, 59, 60, 75, 76, 77), cont. able aveg , ensolite 28895/2X1-180/, -195/, aychem ouble hield (17/ ) aychem (triax cable - contact will terminate inner coax ption only) -400, (17/ ), 17/ OX O O I -, -, -I - OO, O. ontact art umber (ermination Instruction heet)*** ontact ize rimping ools Installation ools in ocket Inner ontact rimp errule Insertion emoval (-1107-) (39029/ upersedes 27536) (-1107-) (-1107-) (-1107-) (-1286-) (-1107-) (-1107-) (39029/ upersedes 27535) (-1107-) (-1107-) (-1107-) (-1293-) (-1107-Y) / /2-31** solder 22520/ / / /2-10 older 22520/5-01 with die set 22520/5-05 () 22520/5-41 () 22520/10-01 with ie et 22520/10-07 () 22520/5-01 with ie et 22520/5-37 () 22520/10-01 with ie et 22520/10-15 () 22520/5-01 with ie et 22520/5-45 () 22520/5-01 with ie et 22520/5-05 () and inserted III II I III 5015 atrix 2 atrix yle rimp ear elease atrix yle rinted ircuit oard X lex (-1107-) (-1107-) (-1107-) (-2091-) (-1107-) (-1107-Q) (-1107-W) (-1107-) (-2091-) (-1107-) O: supersedes I O: ontacts can be dered by part numbers given in chart II OO: Italicized letters in parenthesis that follow positioner part num bers indicate applicable die closure. ommercial equivalents with the same die clo sure dimension may be used / / / older 22520/5-01 with ie et 22520/5-05 () 22520/10-01 with ie et 22520/10-07 () 22520/5-01 with ie et Y25 () 22520/5-01 with ie et 22520/5-05 () O OI: xample number given in chart should be dered as ; example number should be dered as dding Zeros is necessary f mphenol dering process on all contact numbers. onsult mphenol erospace f current release of this contact instruction sheet if applicable ** When inner contact is installed by crimping only xpander ool it must be used to assemble rear insulat over contact. ***ermination instructions are packaged with each contact and can be found on-line at: I ilter ransient iber Optics igh peed ontacts ontact mphenol erospace f me infmation at

19 mphenol erospace atched Impedance oaxial ontacts f I-- igh peed I ilter rinted III iber Optics ransient ircuit oard yle rimp ear ontacts elease atrix atrix yle atrix 2 I II III mphenol atched Impedance ize 12 oaxial ontacts f /icrowave, igh requency and igh erfmance equirements he matched impedance coax contact is available in size 12. It incpates a captivated inner contact which snaps into the outer contact preventing displacement pull back of the inner contact in situations where the cable may be bent. YI I OX O O has socket outer contact with a captivated pin inner contact YI I OX I O has pin outer contact with a captivated socket inner contact esign features and benefits of the atched Impedance: use in 90 degree angle bent cable applications rovides 50 ohm matched impedance resulting in low W and low insertion loss requency range f a mated pair extends to 3 z and beyond, higher than other coaxial contacts previously offered. Ideally suited f high perfmance and I high band coaxial contact requirements igh erfmance ize 12 oax 50 Ohm matched -, I-- eries I, -, I-- eries II, and -, I-- eries III se with able 316, -lex , -lex , ilotex, , 17/ omment 39029/102/103 -, I-- eries II 39029/102/103 ype in (ermination Instruction heet)*** (-2092-) (-2092-) 1088W 1104* XQ 178, e X , e X * /102/103 ype -, I-- eries II 39029/102/103 ype (-2092-) (-2092-) (-2092-) ocket (ermination Instruction heet)*** (-2092-) (-2092-) (-2092-) (-2092-) (-2092-) (-2092-) (-2092-) emflex W /102/103 ype emflex W086 (solid inner 39029/102/103 ype conduct) * dd f pin socket O OI: xample number given in chart should be dered as dding Zeros is necessary f mphenol dering process on all contact numbers. ***ermination instructions are packaged with each contact and can be found on-line at: atched Impedance oax ontact erfmance: lectrical pecifications: ontact impedance = 50 ohms nominal requency range = 0 3 z Operable at higher frequencies depending on cable selection. onsult mphenol f details. ielectric withstanding voltage (f a mated pair): t sea level = 1000 t 50, 000 ft. = 250 Insulation resistance: 5 gigaohms 25 W: ( in z) max. up to 3 z Insertion oss:.11 fz d max. nvironmental pecifications: hermal limits: 55 to 200 echanical pecifications: ating: slide-on ounting: confms to 39029/102 & /103 envelope dimensions 394 ontact mphenol erospace f me infmation at

20 ypical ontact Installation Instructions f oax ontacts mphenol erospace he following is an example of a contact instruction sheet that would be shipped within the package of contacts f a rimp, ize 12 oax on tact f use in ubminiature, connects. he sheet provides detailed instructions f assembling the component parts and f crimping the contact to coaxial cable, along with the recommended cable and tooling to be used. Installation instructions are included within all contacts f connects. installation instructions f other connect series, there are separate documents (not included in packaging of parts) as follows: f iniature solder types, -613 f iniature types, -660 f iniature types, and -650 f /tandard and eavy uty types. any other instructions needed, consult mphenol. ost installation instructions can be found on-line at (from home page, go to ervice Instructions and enter contact part number instruction sheet number). III II I (I) (O) ontact, in and ocket, oaxial, ype - & -, (I-- eries I & III) rimp, ize 12 Installation Instructions ee table on reverse side f coaxial cable recommended and crimp tool infmation.. 1. lide outer crimp ferrule over cable outer jacket as shown. 2. trip cable outer braid as illustrated. nds must be cut cleanly and at right angles to the axial plane of the cable. he cable must not be defmed while making cuts. 3. lare outer braid, then strip cable dielectric as shown.. 1. ssemble inner contact assembly over cable center conduct and cable dielectric until inside be of bushing butts against cable dielectric. 2. able center conduct must be visible through the inspection hole in the inner contact wire well. 3. rimp inner contact wire well using crimp tool listed in table.. 1. arefully slide outer contact assembly over inner contact assembly and under cable outer braid until inner contact butts against insulat shoulder as illustrated. (Inner contact assembly will snap into the locked position when fully assembled inside the outer contact assembly.) 2. ring outer crimp ferrule fward over cable outer braid as illustrated. (ontinue to push the inner contact assembly fully fward while bringing the outer crimp ferrule into position.) 3. rimp outer crimp ferrule using crimp tool listed in table (.156 ax. over ferrule after crimping). rim excess braid ahead of crimp ferrule, if necessary. O IIO IO OO sing insertion tool (part number 81969/ /14-04), insert contact assembly into rear connect grommet hole. ontact must be aligned with hole and not inserted at an angle. ush fward until contact is felt to snap into position within insert. emove tool. O O O OO osition removal tool (part number 81969/ /14-04) around cable and slide tool down wire until tool tips enter rear grommet and come to a positive stop. old tool tip firmly against positive stop on contact, grip wire and simultaneously remove tool, contact and cable October 2001 mphenol art umber escription atched Impedance* ize 12 oax in atched Impedance* ize 12 oax ocket oaxial able ccommodated 316 (17/ ) 179 (17/ ) 316 (17/ ) 179 (17/ ) (I) (O) II OO II OO I O Y (O OW O ) O O Y (I OW O ) I O IO Inner ontact IIO O ools rimp ool etting ositioner (aniels) 992 (aniels) (aniels) (aniels) (aniels) O I.165. II I.010 /.030 ool 22520/5-01 II O I O I O O I Outer ontact ositioner 22520/5-03 () 22520/5-35 () O 1 & III 5015 atrix 2 atrix yle rimp ear elease atrix yle rinted ircuit oard I ilter ransient iber Optics igh peed ontacts * atched Impedance applies when contacts are terminated to 316 cable only. ontact mphenol erospace f me infmation at