Reference. Handling skips Loading shovels and buckets Accessories Custom-madeproducts

Transcription

1 Reference in Handling skips Loading shovels and buckets Accessories Custom-madeproducts

2 safety efficiency CE conformity reliability design innovation sturdiness quality ergonomics

3

4

5 Different types of grip on skips / buckets / accessories Forklift forks grip Grip by crane / hoist / slings Grip by forklift with clamps / stacker Other methods: grab / telescopic, etc.

6 Practical Guide Understanding our technical diagrams... Glossary A : overall depth B : interior depth C : overall width I : interior width D : overall height D 1 : interior height E : maximum loading height K : overall height (when tipping or emptying) F : fork pocket spacing 3

7 AM Multi-function lifting 65 BP Pallet tipper 62 CH A-frame rack 60/61 CN Blade snow plow 63 CR Lifting hook and jib 50 CR-B Big bag support jib 51 CR-H Hydraulic beam for welded wire-netting 54/55 CR-T Jib for welded wire mesh 52 CS / EP Big bag loader / Boom attachment / Custom made production 56/57 FQ Customised forks widener 53 FR Fork extension sleeves 49 MF Fagot trolley 64 QL Loaded delivery platform 66 RC Lower lifting case turner 58 RP Upper lifting case turner 59 48

8 FORK EXTENSION SLEEVES Quick and secure fit. Heavy-duty. Load capacity at end of fork extensions = 1000kg. FR max. fork dimensions B extension sleeve aperture B1 (max) = B / 0,6 length (mm) B1 weight kg painted ref. (pair) 40 x x FRP x x FRP x FRP x x FRP x FRP14520 B1 CHARACTERISTICS: 5mm sheet metal. Forks can enter the sleeves directly, without manual intervention. Removable pins latch sleeves onto fork heels. Fork sleeve bottom par tially closed, improving rigidity. Select model based on fork dimensions (W x H x L). Extension sleeves sold in pairs. According to the ISO Standard length extensions must conform to the following formula: Length of the original truck forks / 0.6 = Maximum length of extension. Maximum load at end of fork extensions: 1000kg evenly distributed over both fork extensions. Warning : Safety lock placed at the top of the sleeves, so check the available space behind your heel forks. Please contact us for different positioning. 50 x x FRP17020 Dimensions in mm (basic model, for guidance only) For customised extension sleeves (fork dimensions dif ferent from those in the above table), please contact us. Fork heel blocking device Reinforced fork pockets Direct forklift entry 49

9 HOOK AND LIFTING JIB Quickly transforms your forklift into a lifting device. Quick mounting on forks. CR A C LIFTING HOOK REF. CRP20000 Characteristics: Load: 2000kg. Fork heel blocking device. Safety hook. Approved by an inspection body. F For customised products, please contact us. load kg A C F fork pocket aperture weight kg painted ref x CRP20000 Dimensions in mm (basic model, for guidance only) D F C P1 B1 B2 B3 C D F B1 B2 P2 fork pocket aperture 1440 B3 weight kg P3 painted ref x CRP30000 ADJUSTABLE LIFTING JIB REF. CRP30000 Characteristics: Adjustable jib: 1960 to 3400mm (8 positions possible). Maximum load: 1000 to 4000kg (see table for details). Automatic fork heel grip system. 2 safety hooks. Check forklift capacity and suitability before use. Approved by an inspection body. Maximum load in kg On 1 hook Evenly distributed across 2 hooks Position 1 Position 2 Position 3 Positions 1 and 2 Positions 1 and Dimensions in mm (basic model, for guidance only) 50 ATTENTION: prior to use, ACCESSORY + FORKLIFT acceptance procedures must be carried out by your authorised inspection body.

10 JIB FOR BIG-BAG Secure handling 2 models Approved by a control organization CR-B CROSS JIB BY CRANE REF. CRP40000 DESIGN FEATURES: For loading and unloading bigbag with crane truck or handling hoist. Maximum load: 1700 kg. Avoids the bigbag movement during the handling. Cleats restraint straps (height 100 mm). Manufacturing in round tube Ø 45 mm. For custom designed products, contact us. Approved by a control organization. D A Load Weight C Painted kg A C D kg ref CRP40000 Dimensions in mm (basic model, for guidance only). JIB FORKS GRIP C F A D I B Load kg A B C F Weight Painted kg ref. I D CRP CRP51000 DESIGN FEATURES: 2 MODELS: CRP50000 : 4 hooks with safety latch for holding bigbag handles. CRP51000 : 4 hooks with quick release. Safe handling. Maximum load: 2000 kg. Direct mounting on forks with fork heel locking device. Fork aperture 170 x 70 mm and fork spacing (F) can be modified on request. Approved by a control organization. Dimensions in mm (basic model, for guidance only). COMPULSORY: before any handling, acceptance of ACCESSORY + FORKLIFT must be notified by your control organization. 51

11 JIB for welded wire mesh Safe and user-friendly handling of welded wire mesh. Approved by an inspection body. Two models. CR-T Characteristics: Maximum load: 1700kg and 2000kg. Jib can be adjusted for various panel formats. Jib width: 3000mm. Adjustable cross-bars: 1200 to 2000mm (4 fixed positions). Fork heel blocking device. 4 1m-long lifting chains with safety and grab hooks. A 1 C F B Fork pockets can be modified on request. 5mm sheet metal. Aperture: 170 x 70mm. Spacing: see F in table. 4 brackets for storing hooks after use. B 1 I load kg B1 B A1 C I F fork pocket aperture weight kg painted ref x CRP x CRP27000 Dimensions in mm (basic model, for guidance only) Secure hold Chains stowed after use Chain with hook and grab hook 52 ATTENTION: prior to use, ACCESSORY + FORKLIFT acceptance procedures must be carried out by your authorised inspection body.

12 CUSTOMISED FORKS WIDENER Send us your technical requirements for achieving customized to suit your needs! FQ TABLE TO COMPLETE AND RETURN TO US FOR A FREE QUOT ATION FEATURES: Made to measure. Secure handling of long loads: packets sheets, wood etc Mounting on original forks of the truck. Speed of implementation. Locking system on the heels of the forks. Design suitable for the required load. Model with 4 fixed forks or 4 manually adjustable forks, to adapt to the most varied dimensions. Material approved by an inspection body. Economical purchase compared to a hydraulic system. Effective length (mm) B Interior height (mm) D1 Overall Width (mm) C Max spacing of carriage (mm) F Truck capacity Tone Forks section and length (mm) Type of load and dimensions (mm) L x l Load weight kg 4 fixed forks model Handling stability and safety Version with ajustable forks ATTENTION : prior to use, ACCESSORY + FORKLIFT acceptance procedures must be carried out by your authorized inspection body. 53

13 HYDRAULIC BEAM 4 forks grip version Hydraulic assembling CRP67000 model: telescopic forklift grip OPTIONS: Adaptation for 4-fork truck. ELP : 4 1m-lifting chains with safety and grab hooks (for retail outlet mesh, manual use as CR-T). RGP : set of 4 opening reducers claws for special size 2 m wire mesh. ELP 4 lifting chain option RGP kit of reducers claws option Fast and secure unloading trucks 54

14 FOR WELDED WIRE-NETTING Trucks unloaded successfully Can handle packets Approved by inspection authority CR-H D1 For forklift Recommendation B2 C D1 F Handles packets safely F C fork pocket aperture B2 weight kg front 2 to 4,80m long wire-netting x CRP ,80 to 6m long wire-netting x CRP77000 telescopic 2 to 4,80m long wire-netting x CRP ,80 to 6mlong wire-netting x CRP87000 Dimensions shown in mm excl. options and without contractual commitment. The 6 m long wire-netting can be downloaded by all the beams but only the CRP77000 and CRP87000 allow stacking of packets paint ref. Telescopic hydraulic arms at the front CHARACTERISTICS: Admissible load 2000 kg. 4T5 forklift truck recommended (another version, please contact us). Beam adjusted by hydraulic telescopic arms. Can handle packets 2.40 m wide. Tightening with stops at 2400 mm (standard welded wire-netting dimensions). Hydraulic tightening by 2 double acting cylinders, travel 700 mm, cased in tubes (total protection against impacts). Delivered with hoses featuring 3/8th male connectors and flow divider, fitted on a bracket. The netting packets are supported by 8 machined interchangeable gripping tines, fitted on 4 removable booms. These pointed-tip machined tines slide easily into the packet without damaging the netting. Truck supports the load safely with Ø12 chains Truck scoop in fork pocket aperture 170 x 70 mm th.5 and centre-tocentre distance (F). Pointed machined gripping tines OBLIGATION: Before any handling operations are under taken, get your inspection authority to per form acceptance tests on the ACCESSORY + TRUCK assembly. 53

15 BIG-BAG LOADER For transporting big-bags. With or without hooks. CS nber of hooks C F load kg A B1 B2 B3 C D F D B1 B2 A B3 fork pocket aperture weight kg painted ref No hooks x CSP x x CSP x x CSP23000 Dimensions in mm (basic model, for guidance only) CHARACTERISTICS: Maximum load: 2000kg Bar ext. Ø: 118mm, Effective length: 1.70m. Fork heel blocking device. Fork pocket aperture and spacing (F) can be modified on request. For customised products, please contact us. Approved by an inspection body. BOOM ATTACHMENT For transporting carpet rolls, fabric, paper, etc. Easy to use with forklift. C EP F D 56 load kg A C D F ATTENTION: prior to use, ACCESSORY + FORKLIFT acceptance procedures must be carried out by your authorised inspection body. = Nominal Charge load nominale fork pocket aperture A = weight kg painted ref x EPP x EPP30000 Dimensions in mm (basic model, for guidance only) CHARACTERISTICS: 2 MODELS: EPP20000: effective length of bar = 1.80m. EPP30000: effective length of bar = 2.80m. Fork heel blocking device. For mandrels of at least Ø75mm (bar ext. Ø = 71mm). Fork pocket aperture and spacing (F) can be modified on request. For customised products, please contact us. Approved by an inspection body.

16 CUSTOMISED LIFTING ACCESSORIES BOOM/HOOK/SPUR/BEAM Approved by inspection authority. Safely handles all loads (bigbag, rollers, coils, nozzles, panels, parts, sheeting, netting, etc.). Easily mounted on forks. With safety locking mechanism on fork heels. MANDATORY: Before any handling operations are undertaken, get your inspection authority to perform acceptance tests on the ACCESSORY + TROLLEY assembly. 57

17 BIN TURNER BOTTOM GRIP Bottom scoop by forks. Perfect for reduced lift height. Calibrated for your bins. Max. load 500 kg. RC Outer Clearance 115 mm min. Truck scoop side 340 min. 340 min. 700 min. Without central leg Outer INFO REQUIRED FOR FEASIBILITY Provide us with information on the dimension of your bins, the cross-section and length of the forks on the forklift truck (drawing above to be completed). The bins must not be fitted with plates on the truck loading point side. Bin height CHARACTERISTICS: Réf. RCP00000 weight 193 kg Manuel tipping Adaptable turner on bins under the following conditions: No plates on truck scoop side. 115 mm min. ground clearance. Bin with central leg: 340 min. clearance on either side of the leg. Case on 4 legs: have a min. dimension of 700 mm between legs (see sketch). Admissible load 500 kg. Case held in mobile frame, controlled by 4 gas struts that can be locked by hooks and a shear pin. Manual control over closing the frame and tipping. Springs dampen the end of travel. Re-actuated by pressing the acceptance hopper or ground Fork pocket aperture 170 x 70 standard centre-to-centre distance of 375 mm. Safety locking mechanism on fork heels. Tipping angle 145. Articulation at fork tips 4 gas struts 58 Container recovery

18 BIN TURNER UPPER GRIP Outside INFORMATION REQUIRED FOR FEASIBILITY Suitable for all types of cases Upper lifting using forklift truck Front emptying, manual or hydraulic tipping Load up to 1T5 depending on model Outside Please indicate: The dimensions of your case by filling in the above diagram. forklift side indicated by A or B, Bearing in mind there must be a minimum gap of 90mm (mark P1-P2). Cross section of your forks Lifting height of forklift mast Height of container (if applicable) Semi-hydraulic Manual version version Case height RP CHARACTERISTICS: Compatible with cases with or without base-plates. Optimised centre of gravity in relation to forklift. Fork pocket aperture 170 x 70 and spacing 800 mm can be modified on request. Fork heel safety locking Tipping angle: MODELS: Manual version Ref. RPP00000 weight 300 kg Load capacity 1,000 kg Case stays inside the mobile frame mobile, fitted with 4 gas struts and can be locked using safety catch and hooks. Frame closing and tipping controlled manually by lever. Flexible tipping on central pivot, dampened by rubber bumpers. Relocks automatically by touching container onto ground or manually. Semi-hydraulic version Ref. RPP20000 weight 320 kg Load capacity 1500 kg Works exactly like model shown above with regards to the mobile frame. Hydraulic switch actuated by 2 double-action jacks (to connect to forklift). Fully hydraulic version Ref. RPP30000 Larger frame and hydraulic tipping (to connect to forklift). Customised production available - Contact us. Capturing of container 59

19 SPECIAL CUSTOM EASELS Send us your technical requirements and we will make the easel to fit! Security Comfort Efficiency Easel with forks grip or crane grip Loading and transport in security Storage facility Easy handling for wood frame panels, woodworking, metal, glass 60

20 FRAME For safely handling and transporting joinery, plates, etc. Approved by inspection authority. CH CHP25000 Handling truck CHP15000 CHP08000 Load Fork pocket Weight Painted kg A B C I D D1 F aperture kg ref. no x CHP x CHP x CHP15000 Dimensions in mm (basic model, for guidance only) D Easy handling A B C I F For use with forklift D1 CHARACTERISTICS: 3 MODELS : Ref. CHP08000 Admissible load 800 kg. Frame with vertical supports. Forklift uses lower loops with 200 x 80 mm apert. and centre-tocentre distance (F) can be changed on request. 1 central crane loading ring with reinforcement brackets. Support side rails covered with glued rubber 40 x 8. 4 side loops for slings. 2 support plates with anti-slip edge. Handling truck Ref. CHP18161 Ref. CHP25000 Admissible load 1500 kg. Frame with inclined supports. Forklift uses lower loops with 200 x 80 mm apert. and centreto-centre distance (F) can be changed on request. 2 central crane loading rings with reinforcement brackets. Support side rails and cross-members covered with interchangeable rubber section. 2 vertical side ramps for fitting slings. Handling truck Ref. CHP16161 Ref. CHP15000 Admissible load 3000 kg. Frame with inclined supports. Forks inserted into fork pocket aperture 170 x 70 th.5 mm and centre-to-centre distance (F) can be changed on request. 1 central crane loading point ring with one 40 cm long chain. Support side rails and cross-members covered with interchangeable rubber section. 2 vertical side ramps for fitting slings. Handling truck Ref. CHP16202 Special manufacturing on request. HANDLING TRUCK Reinforced frame on 4 wheels (2 fixed + 2 pivoting with brake Ø 160 alu/polyurethane or 200 iron/polyurethane for CHP16202) to move the loaded frame easily. 61

21 PALLET TIPPER Effortless pallet unloading. For use with forklift. Pallet securely held. For 80 x 120cm pallets. BP CHARACTERISTICS: Ref. BPP Lg charge 1100 maxi 56 Maximum load : 500 kg. Unload pallet contents effortlessly (bundled boxes, plastics, bags, etc.). Pallet held securely while unloading. For standard 80 x 120cm pallets. Maximum length of the charge on the pallet : 1100 mm (clearance for the claws). Lever for manual tipping. Fork pocket aperture: 145 x 55mm. Spacing: 388mm. Automatic system (claws) holds pallet when emptying. 2 end-stop limit cables. Weight: 125kg Overall dimensions: 580 x 1745 x 465mm. Patented model. Before: tedious manual unloading Now: pallet held securely and completely emptied 62 Easy to use with forklift Grabbing pallet Effortless unloading!

22 SNOW-PLOW BLADE Metal or rubber blade interchangeable Ajustable blade 7 positions Easy to use with forklift CN F D CHARACTERISTICS: Blade width: 1.50m and 2m. Safety chain prevents slipping on forks. Support foot. Fork pocket aperture: 170 x 70mm. Spacing: 600mm. 7 possible blade positions: 1 central, 3 on right and 3 on left. Bolted steel or rubber blade and interchangeable. Length Castor Fork pocket Weight Steel blade Rubber blade mm (C) Ø A F aperture kg ref. blade ref x CNP x CNP15121 CNP x CNP x CNP20121 CNP x CNP x CNP25121 CNP26121 Dimensions in mm (basic model, for guidance only) Steel blade C A Option tank for ballasting 2 MODELS : With highly-resistant rubber scrapper (65 shores), prevents ground damage when clearing snow. 2 pivoting castors guarantee constant blade height. Blade height (D) 825 mm. With bolted steel blade (400 HB), can be uses throughout the year for leveling, clearing or cleaning surfaces. Blade height (D) 800 mm. Version with or without castors (possible to add wheels later). Option: tank for ballasting (on or bellow the fork pocket aperture). Three points hitching 7 possible positions 63

23 FAGOT TROLLEY For transporting bundles of timber slabs. Fagot can be directly forklifted. Retractable cradles. Fagots: 1.70 to 2.50m. MF CHARACTERISTICS: Ref. MFP18004 Chassis: rigid rectangular tubes. Fixed front panel. 2 ratchet winches (bar tension). Cradles: round tubing, retractable on one side. Interior cradle dimensions: 910 x 700mm Chassis length: 1700mm. Maximum load: 1200kg Pull cradles down to remove fagot. Clearance under fagot for direct forklifting. 3 Ø400mm inflatable wheels (2 fixed + 1 pivoting attached to a directional drawbar). Embedded wheels, protected from falling fagots. Weight: 130kg Makes standard 1.70 to 2.50m fagots. For customised products (alternate chassis length, fixed cradle, with or without winch, etc.), please contact us. Protected wheels (embedded under chassis) Cradles retracted Easy to move 64

24 MULTI-FUNCTION HITCHING Lifting by fork-lift truck. With three point hitching. Traction agricultural units. AM Hitching for class III agricultural units Removable jib with hook Hitching for class II agricultural units CARACTERISTICS : 2 VERSIONS AMP20000 and AMP30000 : Fast lifting onto forklift truck with two cable chains to fix onto the mast.. 3 point hitching with adjustable hooks and push bar. Telescopic boom with hook for trailer pulling, spreading, etc. Fork pockets with sliding shutters. AMP20000 Ref. for Class II agricultural units Lower lifting hooks Ø34 load 2500 kg. AMP30000 Ref. for Classe III agricultural units Lower lifting hooks Ø38 load 4000 kg. OPTIONS Removable jib with hook. Telescopic boom with automatic hook. Upper and lower lifting hook.. Power take-off connection. Approved by an official testing body. Special custom (contact us). Boom with automatic hook and opened fork pockets Attelage trois-points IMPORTANT: before any use, the ACCESSORY + FORKLIFT assembly must be approved by your inspection body 65

25 DUCT LOADER Easy to use with forklift. Transport multiple ducts simultaneously. Quick setting. Removable tines. CB CHARACTERISTICS: Ref. CBP10000 Rigid frame. Beam: 200 x 100 x 2500mm, 6mm sheet metal. Maximum load: 2500kg For use with forklift, fork heel blocking device. Fork pockets can be modified on request. 6mm sheet metal. Aperture: 170 x 60mm. Spacing (F): 760mm. Band reinforces entry points. 10 tines: Ø50mm,6mm sheet metal, length=850mm, unit load=250kg Unlock clamping handle to slide (remove or adjust) tines. Load should be evenly distributed over axle. Weight: 268kg For customised products or specific tine quantity, please contact us. Approved by an inspection body. Loading 8 Ø300 ducts ATTENTION: prior to use, ACCESSORY + FORKLIFT acceptance procedures must be carried out by your authorised inspection body. 66

26

27 PROTECTION OF FORKS Protection fork tips during forklift removing on common pathway, safe handling. PC F A CHARACTERISTICS : Robust construction in 5mm. Security on the forks by thumb screws. Forks pocket aperture 145x40mm int. y spacing (F) can be modified on request. Pediment panel 1000x100mm with safety marking black/yellow. Color red ral Contact us for customized version. C D fork pockets weight painted A C D F aperture int. kg version x PCP Dimensions shown in mm excl. options and without contractual commitment. 68

28

29

30

31

32

33 CUSTOM MADE PRODUCTS Dual flap drop-bottom skip Plastic dust-bin jib Drop-bottom skip with retractable lugs Special hydraulic tipping Tipping frame for wood faggots e.g. rubble skip Skip with custom made wheels for use without forklift Truck for fire material Handling trolley 74

34 A few examples of our products Drop-bottom skip with specific cover Viticulture skip with nozzle Coupling with drawbar Skip with grab point Open sides for long products Skip with double-axle steering 75

35 CUSTOM MADE PRODUCTS Reinforced skips for steel-works/foundry/suction Customized jib with stacker grip, for storage platform Hydraulic tipping for skips Skip suitable for machine environment Skip on retractable wheels (stretcher style) Sloped- bottom skip Special telescopic grip Skip with dead-light or trap for glass 76

36 GREEN STANDARD Colour your environment! Our products are coated with anticorrosive glyptal paint. In addition to the standard colour (green) we offer a range of colours (RAL) that are particularly useful for identifying bins according to the type of waste they contain. Choose a different RAL colour to make sure our products blend into your environment. RAL BLACK 9005 RAL YELLOW 1003 RAL YELLOW 1028 RAL ORANGE 2004 RAL RED 3000 RAL BLUE 5015 RAL GREEN 6029 RAL GREY 7036 RAL BROWN 8004 RAL WHITE 9010

37 Distribué par :