Models RSR-M, RSR-N and RSR-TN
|
|
- Bryce Christian Hart
- 9 years ago
- Views:
Transcription
1 odels RSR-, RSR- and RSR-T 1.6 troug 2-l odel RSR3 2-l 1.6 troug odel RSR3 Outer dimensions dimensions odel o. Heigt idt engt Greasing ole Grease nipple RSR 3 RSR 3 RSR 5 RSR 5 RSR 5T odel number coding Sl 1 T K E d H ote) Since stainless steel is used in te, rail and balls, tese models are igly resistant to corrosion and environment. odels RSR3 and 3 do not ave an oil ole. en lubricating tem, apply a lubricant directly to te rail raceways. o contamination protection seal for RSR3/3. To secure te rail of models RSR5 and 5, use cross-recessed ead screws for precision equipment (o. pan ead screw, class 1) 2. 2 RSR5 UU P - odel number o. of s used on te same rail ontamination protection accessory symbol (*1) rail lengt (in mm) Radial clearance symbol (*2) ormal (o symbol) igt preload (1) Stainless steel rail Symbol for o. of rails used on te same plane (*4) Accuracy symbol (*3) ormal grade (o Symbol)/Precision grade (P) (*1) See contamination protection accessory on. (*2) See A. (*3) See A. (*4) See A. ote) Tis model number indicates tat a single-rail unit constitutes one set. (i.e., required number of sets wen 2 rails are used in parallel is 2 at a minimum.)
2 RSR odels RSR5/5T 2-Sl Guide 1 2-Sl 2 1 rail dimensions odel RSR5 asic load rating Static permissible moment -m ass Unit: mm idt Heigt Pitc engt A rail d 1 d 2 ax k k Double s Double s kg kg/m ote) Te maximum lengt under engt indicates te standard maximum lengt of an rail. (See.) Static permissible moment : 1 : static permissible moment value wit 1 Double s: static permissible moment value wit 2 s closely contacting wit eac oter Recommended tigtening torque wen mounting te rail/ Table1 sows recommended bolt tigtening torques wen mounting te and rail of models RSR3/3. Table1 Recommended Tigtening Torques of ounting olts odel o. of screw Recommended tigtening torque (-m) ote) Applicable to austenite stainless steel exagonal-socket-ead type bolts. Options
3 odels RSR-, RSR-K, RSR-V and RSR Sl odels RSR7 to /7/9K/V Outer dimensions dimensions odel o. Heigt idt engt Greasing ole Grease nipple RSR 7 RSR 7 RSR 9K RSR 9 RSR V RSR RSR V RSR RSR 2V RSR 2 odel number coding Sl 1 T K E d H P A ote) Since stainless steel is used in te, rail and balls, tese models are igly resistant to corrosion and environment. 2 RSRV UU P - odel number o. of s used on te same rail ontamination protection accessory symbol (*1) rail lengt (in mm) Radial clearance symbol (*2) ormal (o symbol) igt preload (1) Stainless steel rail Symbol for o. of rails used on te same plane (*4) Accuracy symbol (*3) ormal grade (o Symbol)/Hig accuracy grade (H) Precision grade (P) (*1) See contamination protection accessory on. (*2) See A. (*3) See A. (*4) See A. ote) Tis model number indicates tat a single-rail unit constitutes one set. (i.e., required number of sets wen 2 rails are used in parallel is 2 at a minimum.)
4 RSR 4-Sl E T 1 Guide 2 1 rail dimensions odels RSR and 2V/ asic load rating Static permissible moment -m ass Unit: mm idt Heigt Pitc engt A rail d 1 d 2 ax k k Double s Double s kg kg/m ote) Te maximum lengt under engt indicates te standard maximum lengt of an rail. (See.) Static permissible moment : 1 : static permissible moment value wit 1 Double s: static permissible moment value wit 2 s closely contacting wit eac oter Options
5 odels RSR-(T) and RSR-(T) Sl odels RSR3 to 7/ Outer dimensions dimensions odel o. RSR 3 RSR 3 RSR 5 RSR 5T RSR 5 RSR 5T RSR 7 RSR 7T RSR 7 RSR 7T odel number coding Heigt idt engt Greasing ole Grease nipple Sl 1 T K E d H ote) Te, rail, and ball material are composed of stainless steel and are corrosion resistant to general environments. To secure te rail of models RSR3 and 3, use cross-recessed ead screws for precision equipment (o. pan ead screw, class 1) 2. 2 RSR7 UU P odel number o. of s used on te same rail ontamination rail lengt Stainless steel protection (in mm) rail accessory symbol (*1) Accuracy symbol (*3) Radial clearance symbol (*2) ormal grade (o Symbol)/Hig accuracy grade (H) ormal (o symbol) Precision grade (P) igt preload (1) (*1) See contamination protection accessory on. (*2) See A. (*3) See A.
6 RSR 2-Sl E odels RSR5T/T Guide 4-Sl odels RSR7T/T rail dimensions asic load rating Static permissible moment -m ass idt Heigt Pitc engt A 1 Double 1 Double d 1 d 2 ax k k kg s s Unit: mm ote) Te maximum lengt under engt indicates te standard maximum lengt of an rail. (See.) Static permissible moment : 1 : static permissible moment value wit 1 Double s: static permissible moment value wit 2 s closely contacting wit eac oter rail kg/m Options
7 odels RSR-V, RSR-V and RSR- T Sl odels RSR9, V/V/ Outer dimensions dimensions odel o. Heigt idt engt Greasing ole Grease nipple RSR 9V RSR 9V RSR 9 RSR V RSR V RSR odel number coding Sl 1 T K E d H RSR 14V P RSR V RSR V RSR P17 4 ote) Te, rail, and ball material are composed of stainless steel and are corrosion resistant to general environments. 2 RSRV UU H odel number o. of s used on te same rail ontamination protection accessory symbol (*1) rail lengt (in mm) Stainless steel rail Accuracy symbol (*3) ormal grade (o Symbol)/Hig accuracy grade (H) Precision grade (P) Radial clearance symbol (*2) ormal (o symbol)/igt preload (1) (*1) See contamination protection accessory on. (*2) See A. (*3) See A.
8 RSR 4-Sl T 4-Sl T odel RSR14V 1 E E Guide odels RSRV/V/ rail dimensions asic load rating Static permissible moment -m ass Unit: mm idt Heigt Pitc engt A rail d 1 d 2 ax k k Double 1 Double 1 s s kg ote) Te maximum lengt under engt indicates te standard maximum lengt of an rail. (See.) Static permissible moment : 1 : static permissible moment value wit 1 Double s: static permissible moment value wit 2 s closely contacting wit eac oter kg/m Options
12.2 Compact Type, MSB Series
12.2 Compact Type, MSB Series A. Construction Upper Retainer Carriage End Cap End Seal Rail Grease Nipple Ball Lower Retainer 45 Bottom Seal 45 B. Characteristics The trains of balls are designed to a
More informationConstruction (2) Characteristics (2) Rail Type (2) Carriage Type (3) Description of Specification (4) Accuracy Grade (5) Preload Grade (6)
Contents Construction (2) Characteristics (2) Rail Type (2) Carriage Type (3) Description of Specification (4) Accuracy Grade (5) Preload Grade (6) Dust Proof (7) Dimensions of Tapped-hole Rails (8) Rail
More informationSTAR Linear Bushings and Shafts Supplement RE 83 117/2001-08. Linear Motion and Assembly Technologies
STAR Linear Bushings and Shafts Supplement RE 83 117/2001-08 Linear Motion and Assembly Technologies STAR Linear Motion Technology Ball Rail Systems Standard Ball Rail Systems Ball Rail Systems with Aluminum
More informationLM Guide SR High-Rigidity Radial Type
www.thk.ru BERG AB thk@thk.ru Тел. (49)2222, ф. (49)221 LM Guide SR HighRigidity Radial Type Japanese Patent Nos. 1421, 111, and 1921 Utility model registration No. 199119 LM block End plate Grease nipple
More informationProfile rail guides LLR
Profile rail guides LLR Content The SKF brand now stands for more than ever before, and means more to you as a valued customer. While SKF maintains its leadership as the hallmark of quality bearings throughout
More informationR310EN 2225 (2011.04) The Drive & Control Company
Ball Rail Systems Resist NRII R310EN 5 (011.04) he Drive & Control Company R310EN 5 (011.04) Ball Rail Systems Resist NR II Bosch Rexroth AG 3 Ball Rail Systems Resist NRII General Product Description
More informationCaged Ball LM Guide. Ball Cage Effect Wide, Low Center of Gravity Type SHW. CATALOG No.248-5E
Caged Ball LM Guide Ball Cage Effect Wide, Low Center of Gravity Type SHW CATALOG No.248-E Ball Cage Effect The early forms of ball bearings were full-ball types without ball cages. Friction between balls
More informationRexroth Linear Motion Technology
2 Bosch Rexroth Corp. Linear Motion and Assembly Technologies Ball Rail Systems R310A 2202 (2007.05) Rexroth Linear Motion Technology Ball Rail Systems Roller Rail Systems Linear Bushings and Shafts Standard
More informationBearing Failure: Causes and Cures
Bearing Failure: Causes and Cures bearing.ppt Page 1 Excessive loads usually cause premature fatigue. Tight fits, brinelling and improper preloading can also bring about early fatigue failure. The solution
More informationPerimeter, Area and Volume of Regular Shapes
Perimeter, Area and Volume of Regular Sapes Perimeter of Regular Polygons Perimeter means te total lengt of all sides, or distance around te edge of a polygon. For a polygon wit straigt sides tis is te
More informationStainless Linear Motion Rolling Guide series
products are avaiable from: MARYLAND METRICS phones: (410)358-3130 (800)638-1830 faxes: (410)358-3142 (800)872-9329 P.O.Box 261 Owings Mills, MD 21117 USA URL: http://mdmetric.com E-mail: sales@mdmetric.com
More informationShell and Tube Heat Exchanger
Sell and Tube Heat Excanger MECH595 Introduction to Heat Transfer Professor M. Zenouzi Prepared by: Andrew Demedeiros, Ryan Ferguson, Bradford Powers November 19, 2009 1 Abstract 2 Contents Discussion
More informationiglidur PRT Slewing Ring Bearing
igliur igliur Slewing Ring Bearing Stanar range Completely maintenance-free Easy installation, intercangeable sliing pas ig wear resistance For ig loa capacity, ig stiffness Available as stainless steel
More informationBall Rail Tables TKK. with Ball Rail Systems and Ball Screw Drive R310EN 2501 (2008.04) The Drive & Control Company
with Ball Rail Systems and Ball Screw Drive R310EN 2501 (2008.04) The Drive & Control Company Bosch Rexroth AG Linear Motion and Assembly Technologies Ball Rail Systems Roller Rail Systems Linear Bushings
More informationf(x) f(a) x a Our intuition tells us that the slope of the tangent line to the curve at the point P is m P Q =
Lecture 6 : Derivatives and Rates of Cange In tis section we return to te problem of finding te equation of a tangent line to a curve, y f(x) If P (a, f(a)) is a point on te curve y f(x) and Q(x, f(x))
More informationNSK LINEAR GUIDES FOR INDUSTRIAL AUTOMATION AND EQUIPMENT
NSK LINEAR GUIDES FOR INDUSTRIAL AUTOMATION AND EQUIPMENT Five Types available in Commercial Grade LE Series Miniature - Wide Type LH Series for High Load Capacity Applications LS Series for Compact Low
More informationT-Series Precision Linear Actuators Installation and Service Manual DW110353GB-1018 - EDITION 5. www.thomsonlinear.com
T-Series Precision Linear Actuators Installation and Service Manual DW110353GB-1018 - EDITION 5 www.thomsonlinear.com Version History Edition Number Edition Date Reason for Revision 1 2004 First edition
More informationProfile rail guides LLT
Profile rail guides LLT Contents The SKF brand now stands for more than ever before, and means more to you as a valued customer. While SKF maintains its leadership as the hallmark of quality bearings throughout
More informationResearch on the Anti-perspective Correction Algorithm of QR Barcode
Researc on te Anti-perspective Correction Algoritm of QR Barcode Jianua Li, Yi-Wen Wang, YiJun Wang,Yi Cen, Guoceng Wang Key Laboratory of Electronic Tin Films and Integrated Devices University of Electronic
More informationSAT Math Must-Know Facts & Formulas
SAT Mat Must-Know Facts & Formuas Numbers, Sequences, Factors Integers:..., -3, -2, -1, 0, 1, 2, 3,... Rationas: fractions, tat is, anyting expressabe as a ratio of integers Reas: integers pus rationas
More informationVandal-proof keypad series
Model No. LBKP35900 / LBKP35900E (Encryption available) Interface: PS2, USB available. Dimensions: 100mm x 91.5mm No. of keys: 16 keys, high quality stainless steel G.W.: 0.75kg. All languages version
More informationTangent Lines and Rates of Change
Tangent Lines and Rates of Cange 9-2-2005 Given a function y = f(x), ow do you find te slope of te tangent line to te grap at te point P(a, f(a))? (I m tinking of te tangent line as a line tat just skims
More informationMini slide, Series MSN narrow version Ø 6-16 mm double-acting with magnetic piston cushioning: elastic with integrated ball rail guide
Piston rod cylinder uide cylinders ini slide, Series SN 1 Ambient temperature min./max. +0 C / +60 C edium Compressed air ax. particle size 5 µm Oil content of compressed air 0 mg/m³ - 1 mg/m³ Pressure
More informationCross-Roller Ring Series
Cross-Roller Ring Series Compact, Highly Rigid Swivel Bearings Achieving a Superb Rotation Accuracy For details, visit THK at www.thk.com Product information is updated regularly on the THK website. CATALOG
More informationHeat Exchangers. Heat Exchanger Types. Heat Exchanger Types. Applied Heat Transfer Part Two. Topics of This chapter
Applied Heat Transfer Part Two Heat Excangers Dr. Amad RAMAZANI S.A. Associate Professor Sarif University of Tecnology انتقال حرارت کاربردی احمد رمضانی سعادت ا بادی Autumn, 1385 (2006) Ramazani, Heat Excangers
More informationHigh precision ball bearings
GMN Paul Müller Industrie GmbH & Co. KG Äussere Bayreuther Str. 230 D-90411 Nuremberg Phone: +49 911-5691-0 Fax: +49 911-5691-221 www.gmn.de High precision ball bearings Ball bearings: Phone: +49 911-56
More informationAluminium Standard. Technical Data. Included in delivery
luminium Standard UL / cul Robust aluminium enclosure for mechanical engineering and automation technology Fixing options for s and mounting plates Usable in wide temperature area Technical ata aterial:
More informationGeneral: Design: Mating Component:
General: Spiet djustable Locknuts adjust, preload, and secure bearings and oter macine components on safts and spindles wit a ig degree of stiffness. Tey permit te correct setting of te axial preload of
More informationLinear modules Lifting units Rotary modules Grip modules Inductive proximity switches Plug connectors
20000 Linear modules Lifting units Rotary modules Grip modules Inductive proximity switches Plug connectors 23000 22000 21000 20000 09000 08000 07000 06000 05000 04000 03000 02000 01000 823 Notes 824 Technical
More informationNSK Linear Guides. Interchangeable Series for Industrial Automation Equipment
Linear Guides Interchangeable Series for Industrial Automation Equipment Ball slides and rails are sold separately for maximum convenience and flexibility. A standard stock ensures short delivery time.
More informationQ&A Session for Advanced Ball Screws 102: Troubleshooting for Design Engineers
Q&A Session for Advanced Ball Screws 102: Troubleshooting for Design Engineers Topic: Noise Q: Is there a way to predict/calculate noise on a ball screw? A: No, there is no way to calculate the noise of
More informationRoller Chain Coupling
Roller Chain Coupling Features 1. Simple structure A roller chain coupling consists of one duplex roller chain and two sprockets for a simplex chain. Handling is very simple as both the shafts (driving
More informationRecall from last time: Events are recorded by local observers with synchronized clocks. Event 1 (firecracker explodes) occurs at x=x =0 and t=t =0
1/27 Day 5: Questions? Time Dilation engt Contraction PH3 Modern Pysics P11 I sometimes ask myself ow it came about tat I was te one to deelop te teory of relatiity. Te reason, I tink, is tat a normal
More informationDEHA SPHERICAL HEAD LIFTING ANCHOR SYSTEM KKT 13-E
KKT 13-E CONCRETE Tis catalogue is an installation and application instruction as defined in VDI/BV-BS 6205 Introduction Certified quality from HALFEN Connect to safety. VDI/BV-BS 6205 HALFEN Sperical
More informationLinear guide slides. For smooth and extremely accurate positioning
Linear guide slides For smooth and extremely accurate positioning Complete Gilman USA slide selection Linear slides ** Built-to-order Ball or roller styles Used for high-precision, high-speed applications
More informationTyco PremiAir Pneumatic Actuators
A comprehensive range of pneumatic actuators, conforming to EN ISO 5211, providing compact, reliable and economical powered operation for all types of quarter turn valves. Features Mounting to valve either
More informationMANUAL TRANSMISSION CONTENTS ...
22D-0-1 MANUAL TRANSMISSION CONTENTS GENERAL INFORMATION... 22D-0-3 1. SPECIFICATIONS... 22D-1-1 TRANSMISSION MODEL TABLE GENERAL SPECIFICATIONS SERVICE SPECIFICATIONS TORQUE SPECIFICATIONS............
More informationElectric Rotary Actuator - On/Off or programmable control actuator
Electric Rotary Actuator - On/Off or programmable control actuator Direct mounting on quarter-turn valves Manual override standard Corrosion resistant Adjustable limit switches Multi-voltage version Type
More informationSpecial Rolling Bearings
Special Rolling Bearings Special Rolling Bearings KINEX produces, except a large number of types and sizes of standardized rolling bearings of both basic and modified designs presented in the preceding
More informationPneumatic Grippers Parallel and Angular Grippers. Catalog 1900-2/US
Pneumatic Grippers Parallel and Angular Grippers Catalog 19-2/US Catalog 19-2/US OContents GPR Series Rotary vane driven design GPR GPCR Series P5G-HPM(C) Series P5G-HP Series GPT Series P5G-AP Series
More informationHigh Precision Bearings for Combined Loads
High Precision Bearings for Combined Loads Axial/radial bearings Axial angular contact ball bearings Axial/radial bearings with angular measuring system added competence for your success With their forward-looking
More informationBall valve C 16 valve ball completely moulded in place, extremely low clearance volume, high k v value
Ball valve C valve ball completely moulded in place, extremely low clearance volume, high k v value Advantage maximum safety due to valve ball completely moulded in place - ball and ball seat cannot be
More informationLEVEL GAUGES WITH MAGNETIC JOINT L 14 - L 22 - L 34
LEVEL GAUGES WITH MAGNETIC JOINT L 14 - L 22 - L 34 2 LEVEL GAUGES WITH MAGNETIC JOINT SIZE Ø 140/220/340 58 58 TYPE LA TYPE LA 14 30 S 22 33 TYPE LA 22-34 NO. HOLES Ø D2 76 O-RING CENTRE OF THE CONSERVATOR
More informationHochpräzisions-Wälzlager High Precision Bearings
Tel: +49/64 41/95 53-02 Fax: +49/64 41/5 30 15 POSTFACH 1825 35528 WETZLAR (GERMANY) e-mail: ibc@ibc-waelzlager.com Industriegebiet Oberbiel D-35606 Solms-Oberbiel http://www.ibc-waelzlager.com IBC INDUSTRIAL
More informationThe EOQ Inventory Formula
Te EOQ Inventory Formula James M. Cargal Matematics Department Troy University Montgomery Campus A basic problem for businesses and manufacturers is, wen ordering supplies, to determine wat quantity of
More information2 Limits and Derivatives
2 Limits and Derivatives 2.7 Tangent Lines, Velocity, and Derivatives A tangent line to a circle is a line tat intersects te circle at exactly one point. We would like to take tis idea of tangent line
More informationBearing designation is created by numerical and letter symbols indicating the type, size and design of the bearing, see the scheme.
2.2 Designation Bearing designation is created by numerical and letter symbols indicating the type, size and design of the bearing, see the scheme. In the basic design the bearings are designated by a
More informationMATHEMATICS FOR ENGINEERING DIFFERENTIATION TUTORIAL 1 - BASIC DIFFERENTIATION
MATHEMATICS FOR ENGINEERING DIFFERENTIATION TUTORIAL 1 - BASIC DIFFERENTIATION Tis tutorial is essential pre-requisite material for anyone stuing mecanical engineering. Tis tutorial uses te principle of
More informationROLLER GUIDE LINEAR MOTION PRODUCTS
ROLLER GUIDE LINEAR MOTION PRODUCTS 0 ROLLER GUIDE This linear motion system is based on the well known crossed roller design. A high level of High rigidity is achieved through a geometric design that
More informationTBG-25 OPTIONS X AXIS TRAVEL (MM) Z AXIS TRAVEL (MM) OPTIONS FOR: SPECIFICATIONS. Specifications. Configuration. Belt Type 25.
LINEAR ROBOTICS > T-BOT GANTRY ROBOTS T-BOT GANTRY ROBOTS TBG-25 OPTIONS X AXIS TRAVEL (MM) 500 1000 2000 Custom Z AXIS TRAVEL (MM) 250 500 Custom Controls Motor Gearbox HOW TO BUILD YOUR TBG-25: Features
More informationKA/8000/M, KA/8000, ISO cylinder (Stainless steel) Magnetic & Non-magnetic piston, double acting
K/8000/M, K/8000, ISO cylinder (Stainless steel) > > Ø 3... 00 mm > > High corrosion and acid resistance > > Ideal for applications in the food industry > > Conforms to DIN ISO 555, DIN ISO 63, VDM 56
More informationRadial Insert Ball Bearings Housing Units. Our Expertise is Your Benefit. Schaeffler Group Industrial
Radial Insert Ball Bearings Housing Units Our Expertise is Your Benefit Schaeffler Group Industrial A p p l i c a t i o n s Quality for every eventuality: Radial insert ball bearings in industry Radial
More informationGivare NC-SRS 280 och 880
Givare NC-SRS 280 och 880 Aratron AB/Nordic Control, 02 03 SRS280SEALED ROTARY SENSOR PERFORMANCE ±2 Resistance ±20% Hysteresis (repeatability) Accuracy Applied voltage maximum Resolution Output smoothness
More informationSelecting and Sizing Ball Screw Drives
Selecting and Sizing Ball Screw Drives Jeff G. Johnson, Product Engineer Thomson Industries, Inc. Wood Dale, IL 540-633-3549 www.thomsonlinear.com Thomson@thomsonlinear.com Fig 1: Ball screw drive is a
More informationSKF angular contact ball bearings your key to longer service life
SKF angular contact ball bearings your key to longer service life Contents Made by SKF stands for excellence. It symbolises our consistent endeavour to achieve total quality in everything we do. For those
More informationVerifying Numerical Convergence Rates
1 Order of accuracy Verifying Numerical Convergence Rates We consider a numerical approximation of an exact value u. Te approximation depends on a small parameter, suc as te grid size or time step, and
More informationOperataing Manual. Single stage radial Fan. Model MKV/TKV
01.2011 Operataing Manual Single stage radial Fan Model MKV/TKV REITZ-SCHWEIZ VENTILATOR AG Zentweg 11 CH-3006 Bern Telefon +41 (0) 31 / 938 85-85 Telefax +41 (0) 31 / 938 85-86 Internet: www.reitz-schweiz.ch
More informationSAT Subject Math Level 1 Facts & Formulas
Numbers, Sequences, Factors Integers:..., -3, -2, -1, 0, 1, 2, 3,... Reals: integers plus fractions, decimals, and irrationals ( 2, 3, π, etc.) Order Of Operations: Aritmetic Sequences: PEMDAS (Parenteses
More information1.6. Analyse Optimum Volume and Surface Area. Maximum Volume for a Given Surface Area. Example 1. Solution
1.6 Analyse Optimum Volume and Surface Area Estimation and oter informal metods of optimizing measures suc as surface area and volume often lead to reasonable solutions suc as te design of te tent in tis
More informationSo You Want to Think Lean? Jürgen Hilbinger and Martin Schreiber
So You Want to Think Lean? Jürgen Hilbinger and Martin Schreiber INA reprint November 2000 So You Want to Think Lean? New High-Precision Bearing Unit for Cost-Effective Ball Screw Supports in the Small
More informationkymanual or Automatic - it s your Choice
. kymanual or Automatic - it s your Choice ky LKB Automatic or Manual Butterfly Valve Application LKB is a sanitary automatically or manually operated butterfly valve for use in stainless steel pipe systems.
More informationProjective Geometry. Projective Geometry
Euclidean versus Euclidean geometry describes sapes as tey are Properties of objects tat are uncanged by rigid motions» Lengts» Angles» Parallelism Projective geometry describes objects as tey appear Lengts,
More informationBearings for Machine Tools. Bearings for Machine Tools. Bearings for Machine Tools. Bearings for Machine Tools. MRC Bearing Services
Bearings for Machine Tools Bearings for Machine Tools Bearings for Machine Tools Bearings for Machine Tools MRC Bearing Services Table of Contents Page Section I Introduction.........................................................3
More informationOptimized Data Indexing Algorithms for OLAP Systems
Database Systems Journal vol. I, no. 2/200 7 Optimized Data Indexing Algoritms for OLAP Systems Lucian BORNAZ Faculty of Cybernetics, Statistics and Economic Informatics Academy of Economic Studies, Bucarest
More informationMath Test Sections. The College Board: Expanding College Opportunity
Taking te SAT I: Reasoning Test Mat Test Sections Te materials in tese files are intended for individual use by students getting ready to take an SAT Program test; permission for any oter use must be sougt
More informationACT Math Facts & Formulas
Numbers, Sequences, Factors Integers:..., -3, -2, -1, 0, 1, 2, 3,... Rationals: fractions, tat is, anyting expressable as a ratio of integers Reals: integers plus rationals plus special numbers suc as
More informationZKL Bearings for Railway Rolling Stock
2 ZKL Bearings for Railway Rolling Stock ZKL Bearings for Railway Rolling Stock Railway industry is a very prospective sector worldwide and therefore ZKL pays particular attention to bearings for railway
More informationTerminal Boxes in Glass Fiber Reinforced Polyester (GRP)
Features Variants options Glass fiber reinforced polyester (GRP) enclosures Suitable for installation in Zones 0, 1, 2, 21 and 22 Certified Ex e, Ex ia and Ex tb 16 enclosure size options Various terminal
More informationPPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES
PPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES BUSHING WITH PLUG CONNECTION WITH OUTER CONE PPS CHARACTERISTICS The PPS bushing can be used as a fixed section for the entry of medium
More informationRAILWAY CATENARY SYSTEMS. Components and Systems for the Electrification of Railway Lines. ibemo
Connectors, Clamps, Compensating Devices, Insulators and Safety Equipment for Overhead Catenary Lines RAILWAY CATENARY SYSTEMS Components and Systems for the Electrification of Railway Lines. Welcome to
More informationUC-SERIES TIMKEN BALL BEARING HOUSED UNITS
UC-SERIES TIMKEN BALL BEARING HOUSED UNITS 3 TIMKEN BALL BEARING HOUSED UNITS DESIGNED FOR OPTIMIZED PERFORMANCE For more than 110 years, Timken innovations continue to keep the world in motion, including
More informationA strong credit score can help you score a lower rate on a mortgage
NET GAIN Scoring points for your financial future AS SEEN IN USA TODAY S MONEY SECTION, JULY 3, 2007 A strong credit score can elp you score a lower rate on a mortgage By Sandra Block Sales of existing
More informationPressure calibration equipment
Pressure calibration equipment Pressure calibration evolution 1925 Westertoren in Amsterdam 30 meter mercury column (±40 bar) 1950 comparison test pump 21 st century Stiko gas driven differential deadweight
More informationMetric roller bearing units SYNT and FYNT series (SKF ConCentra)
Metric roller bearing units SYNT and FYNT series (SKF ConCentra) Bearing types Spherical roller bearings Bearing dimension series 222 Shaft diameter range 35 to 100 mm SKF ConCentra roller bearing units
More informationShut-off & Lockout Valves 1/4" to 1-1/2" port size
Section 16 Shut-off & Lockout Valves 1/4" to 1-1/2" port size Contents T72 Excelon Shut-off & Lockout Valves 1/4", 3/8" Port Sizes....................................ALE-16-2 T73 Excelon Shut-Off & Lockout
More informationFOREWORD. Right and left as used throughout this manual are determined by facing the direction the machine will travel when in use.
FOREWORD The purpose of this manual is to assist you in operating and maintaining your Flail mower. Read it carefully before operating and maintaining the Flail mower, it furnishes the specifications,
More informationCompact cylinder Double acting single rod type. SSD SSD-L (with switch) Double acting Compressed air 1.0. 1.6-10 to 60 (no freezing) Rc1/8 Rc1/4 Rc3/8
* U S 4 Specifications escriptions Bore size mm Actuation Working fluid ax. working pressure Pa in. working pressure Pa Withstanding pressure Pa Ambient temperature Port size Stroke length Rubber cushioned
More informationL I V E T O O L F O R O K U M A
L I V E T O O L F O R O K U M A The Way to Success [Heimatec headquarters-germany] Heimatec is an international manufacturing company headquartered in Renchen, Germany. Heimatec s 40,000 square foot facility,
More informationGlobo P. Ball valves Pump ball valve made of gunmetal
Globo Ball valves ump ball valve made of gunmetal IMI EIMEIER / Shut-off valves / Globo Globo Globo and Globo -S are used in pump warm water heating systems for direct connection to circulating pumps with
More informationFor New Technology Network. Steel Manufacturing Machinery Product Guide Book
For New Technology Network R Steel Manufacturing Machinery Product Guide Book Ecological / Economical proposals from NTN NTN products exhibit benefits at various locations. Steel manufacturing equipment
More informationSKF Y-bearing units. Extreme temperatures
SKF Y-bearing units Extreme temperatures Contents The SKF brand now stands for more than ever before, and means more to you as a valued customer. While SKF maintains its leadership as the hallmark of quality
More information13 PERIMETER AND AREA OF 2D SHAPES
13 PERIMETER AND AREA OF D SHAPES 13.1 You can find te perimeter of sapes Key Points Te perimeter of a two-dimensional (D) sape is te total distance around te edge of te sape. l To work out te perimeter
More informationbe carried out to determine whether the housing connecting bolts and the mounting bolts are still suitable. Torque
SD Plummer Block Housings SD Series 31.. + 30.. housings are split plummer blocks for spherical roller bearings with adapter sleeves. They are fitted with labyrinth seals. Housings for shaft ends are supplied
More informationNorbro Series 40R Pneumatic Actuator Double Acting or Spring Return
Pneumatic Actuator Double Acting or Spring Return Since the mid-sixties the Norbro name has been recognised as the leading quarter turn actuator for industry. As proof of this, Norbro pneumatic actuators
More informationInstantaneous Rate of Change:
Instantaneous Rate of Cange: Last section we discovered tat te average rate of cange in F(x) can also be interpreted as te slope of a scant line. Te average rate of cange involves te cange in F(x) over
More informationTorque motors. direct drive technology
Torque motors direct drive technology Why Direct Drive Motors? Fast and effective Direct-drive technology in mechanical engineering is defined as the use of actuators which transfer their power directly
More informationZKL- ZRL Praha, a.s. MANUFACTURER OF BALL BEARINGS
ZKL- ZRL Praha, a.s. MANUFACTURER OF BALL BEARINGS CATALOG OF BEARINGS Contents Introduction... 3 Technical Section... 4 Single Row Ball Bearings... 4 Self-Aligning Ball Bearings... 4 Special Ball Bearings...
More informationThreaded Resistance Thermometers Model TR10-D, Miniature Design
Electrical Temperature Measurement Threaded Resistance Thermometers Model TR10-D, Miniature Design WIKA Data Sheet TE 60.04 Applications Machine building, plant and tank construction Power transmission
More informationHighly flexible couplings
Construction and operation 8.03.00 Instructions for installation 8.03.00 Types of stress 8.04.00 Diagrams for static deformation of the coupling ring 8.05.00 Coupling size 8.07.00 Examples of combinations
More informationChapter 10: Refrigeration Cycles
Capter 10: efrigeration Cycles Te vapor compression refrigeration cycle is a common metod for transferring eat from a low temperature to a ig temperature. Te above figure sows te objectives of refrigerators
More informationSelecting and Applying Rolling Element Linear Bearings and Guides
Selecting and Applying Rolling Element Linear Bearings and Guides Al Ng, Director, Engineering Rails, Guides & Components Ryan Thomas, Product Specialist Linear Components Thomson Industries, Inc. Wood
More informationCerobear Spindle Bearings for Machine Tool Applications
Cerobear Spindle Bearings for Machine Tool Applications Cerobear Spindle Bearings About CEROBEAR Committed to the abbreviation CEramic in ROlling BEARings, CEROBEAR GmbH is the renowned world leader in
More informationPneumatic actuators The Original! Technics of the top class.
Automatic valves Actuators Accessories Pneumatic actuators The Original! Technics of the top class. Leaflet no. S1-01e-13 Table of contents Advantages and your benefits...page 3 Figure: actuator...page
More information22 PROPELLERS FOR VOLVO PENTA IPS
22 PROPELLERS FOR VOLVO PENTA IPS Propellers for Volvo Penta IPS Faster, further, cleaner and quieter When Volvo Penta launched the revolutionary IPS (Inboard Performance System) we set a completely new
More informationSelf-operated Pressure Regulators Universal Pressure Reducing Valve Type 41-23
Self-operated Pressure Regulators Universal Pressure Reducing Valve Type 41-23 Application Pressure regulators for set points from 5 mbar to 28 bar Valves in nominal sizes DN 15 to 100 Nominal pressures
More informationUnited Kingdom Sweden Germany Switzerland USA, Canada and Mexico China Japan France Linear Units Y07 GB Asia Pacific Italy EU-200502-03 03JUL
Linear Units Linear Units Table of Contents Introduction... 5 Introduction... 5 How to Choose a Unit...6-7 Technical Introduction...8 - Linear Units with Ball Screw Drive and Ball Guide... 3 Introduction...
More informationGoulds AF. Axial Flow Pump
Goulds AF Axial Flow Pump Goulds AF The Industry Leader in Circulating Pump Technologies Fabricated design 42-66 (1050-1600 mm) (shown with optional spring mounted base) Cast design 6-36 (150-900 mm) Goulds
More informationM Series Manual Handwheel Gear Actuators for Fisher Butterfly Valves
M Series Actuators D500239X0 Product Bulletin M Series Manual Handwheel Gear Actuators for Fisher Butterfly Valves M Series handwheel gear actuators are totally enclosed, weatherproof, worm gear actuators
More informationHow To Ensure That An Eac Edge Program Is Successful
Introduction Te Economic Diversification and Growt Enterprises Act became effective on 1 January 1995. Te creation of tis Act was to encourage new businesses to start or expand in Newfoundland and Labrador.
More informationReaction Torque Sensor
Force 1 1 N m up to 1 000 1 000 N m Type 9329A 9389A These easy to install piezoelectric reaction torque sensors are particularly suitable for measuring rapidly changing torques at non-rotating shafts.
More information