Inverter Field Service Technician II
|
|
- Antony Webster
- 8 years ago
- Views:
Transcription
1 Inverter Field Service Technician II This position requires extensive travel when in the field. When Inverter Field Service Technicians do not have field assignments they are assigned to the factory s test department or technical support. Analyze and service industrial bi-directional inverters in the field or end customer s facility. Onsite installation of new inverters and support integration with customer controls, DC sources (battery, PV), and AC feeds (grid, load). Provide recommendations regarding which products or services best fit the customers' needs. Identify areas for product improvement. Provide training on product maintenance. Perform a variety of tasks with a certain degree of creativity and latitude. Familiarity with standard concepts, practices, and procedures required to service power conversion equipment. Basic knowledge of control circuits associated with the product line within a particular field needed. Must be able to rely on experience and judgment to plan and accomplish goals. Must have a good working knowledge of single and 3-phase power systems and a good working knowledge of IGBT based power conversion topology. Experience required in the use of basic mechanical hand tools and electrical test equipment used for maintenance and measurement of line frequency power circuits (i.e. DVM, current measurement of AC and DC circuits, oscilloscope, power and energy measurement equipment) is required. Experience with medium voltage powers system is helpful. The ability to perform most functions without assistance is necessary. Requires a 2 year technical degree or the equivalent, as well as 3-5 years of experience in the power electronic conversion field or in related area.
2 Inverter Field Service Technician I This position requires extensive travel when in the field. When Inverter Field Service Technicians do not have field assignments they are assigned to the factory s test department or technical support. Analyze and service industrial bi-directional inverters in the factory or end customer s facility. Provide recommendations regarding which products or services best fit the customers' needs as necessary. Identify areas for product improvement. Provide training on product maintenance. Perform a variety of tasks with a certain degree of creativity and latitude. Familiarity with standard concepts, practices, and procedures required to service power conversion equipment. Basic knowledge of system control circuits associated with the product line required. Must be able to rely on experience and judgment to plan and accomplish goals. Basic working knowledge of single and 3-phase power systems is required. Experience required in the use of basic mechanical hand tools and electrical test equipment used for maintenance and measurement of line frequency power circuits (i.e. DVM, current measurement of AC and DC circuits, oscilloscope). 1-3 years of experience in the power electronic conversion field or in a related area.
3 Inverter Test Technician- Level 2 General Description: Inspect, test and repair Dynapower bi-directional inverters, and other power supply products, transformers and subassemblies. Rework, upgrade and repair field returned products. Understand, promote and practice safety within the workplace Essential Functions: Demonstrate the ability to: Perform all functions of a level 3 in this job task Perform all skills as outlined in the Computer Skills document (Document A) Verify new test procedures for engineering Have an advanced understanding of electronics and the ability to test and inspect more complicated Dynapower products Build test jigs and fixtures Understand how the inverters are used in real world applications (see the big picture) Perform testing work which is more complex than that performed by Level 3 Test Technicians, requiring greater skill and judgment to interpret and evaluate test conditions and results. Capable of testing inverter control and power modules, Compact Power Systems inverters, Micro Power System inverters, and/or PowerSkid inverters with minimal supervision. Keep area organized, safe and clean to work in Answer questions and assist all level 3 employees Perform all other duties as assigned by management Minimum Qualifications: High school diploma or equivalent. Observes all safety and plant regulations Must meet physical demands of job as described in job task documentation Must be able to read and interpret engineering prints and parts list Must have a working knowledge of AC/DC theory, Ohm s Law and be familiar with 3 phase power. Must be able to read electronic and electrical diagrams. Able to visualize final product and infer assembly detail from engineering documentation. Able to read and interpret various measuring instruments Possess good interpersonal skills
4 Equipment Used: Inverter Test Technician- Level 2 Common Hand tools Various electric tools Computer, calculator Tape measure Soldering Iron Oscilloscope DMM Ammeters Power Scopes Isolators Function Generators Power Supplies Spectrum Analyzers Various Test Fixtures and test equipment Personal Protection Equipment Used: Safety glasses (Required) Safety shoes Electrical Hazard (Required) Arc Flash Clothing (Required) Hearing protection (As Required) Gloves (As Required) Tools Provided by Employee by Start Date: Not applicable
5 Payroll Clerk/Receptionist This position will assist the Human Resources Administrator in the process of the weekly hourly payroll and other HR functions for the hourly employees as well as fill in as Receptionist in the main lobby on a part time weekly basis. The Payroll Clerk is responsible for but not limited to processing the weekly hourly payroll, be the point of contact for hourly employees, maintain vacation accruals and balances, prepare monthly performance reviews for Supervisors, schedule employee events, maintain spreadsheets and programs as requested by the HR Administrator and maintain employee voucher program. The Receptionist is responsible for but not limited to answering a multi system phone line, forward incoming calls to appropriate person, greet and assist customers and vendors, assist in taxi service for employees, data entry when requested by other managers, process lunch orders, Must be friendly and well spoken. Able to take direction as well as be a self-starter. Proficient in Excel, Microsoft Word and Outlook. Multi system phone line experience a plus. High school diploma or equivalent
6 Embedded Systems Engineer Key engineer responsible for the design & integration of complex digital embedded communication and control systems, associated software and digital communication protocols for use with a family of power conversion products with Field Programmable Gate Array (FPGA) and Digital Signal Processing (DSP) controls. Software code employed to perform these responsibilities include C, C derivatives, VHDL, Python, LabView and latter logic (RSLogix). Responsible for the specification writing, support of the overall design and testing of electronic control and monitoring systems. 1) 5 years experience in writing, prototyping and testing embedded communication and control software and associated algorithms. 2) 2 years experience in software and schematic design. 3) 2 years experience in the use of laboratory test equipment and emulators 4) Knowledge and experience of C+, Labview, Assembly environment/language Bachelor of Science (or equivalent) in Electrical Engineering, Computer Science or Applied Math
7 Sales Engineer Industrial Systems Responsible for the sale of large AC & DC power conversion systems and transformers ranging in size from 50kw to 5MW. These systems include Thyristor, IGBT Switching Rectifier (Chopper), Switchmode and Diode technologies for the Electrochemical, Electrowinning, surface finishing, battery formation and heavy industry for a national and international clientele. An understanding of conversion technologies as applied to the power conversion is an asset in this position. include supporting the existing client base and the development of new opportunities for the application of the company s power conversion technologies. is responsible for the development of technical and commercial proposals in accordance with the customer specifications including contract documents, initial cost analysis and account management. An understanding of the various power conversion systems that have been used in the surface finishing, electrochemical and heavy industries is required. An understanding of the manufacturing of power conversion systems and a solid sales background in power electronic engineered products for high dollar value projects is a requirement. Excellent English language skills, both written and oral are a necessity in this position. These skills need to include the understanding of technical specifications, drawings, tender documents, preparation/development of cost estimates, written proposals and sales presentations of both a technical & commercial nature. Microsoft suite of PC programs is a requirement. Experience Proven experience in the field of Power Electronics, specifically in power conversion techniques, product application and improvements, sales/warranty administration and the implementation of organizational business strategies as they apply to the sale of the company s products. They should have proven management skills in interfacing with customers, business units and product managers, and proven success in achieving corporate objectives and customer satisfaction. Individual needs to be a structured and organized self-starter who can work independently as well as in the team environment. This position requires some travel; sometimes on short notice. Fluent in multiple languages a plus. 5 years of proven experience in the field of Sales of Power Electronics with a degree in Electrical Engineering specializing in Power Electronics and/or Electric Power Systems is a plus.
8 Senior Sales Engineer High Power Conversion Systems Responsible for the sale of high power AC & DC power conversion systems ranging in size from 500kw to 50MW. These systems include Thyristor, IGBT Switching Rectifier (Chopper), and Diode technologies for the Electrochemical, Electrowinning, Copper Foil, and other heavy industrial applications for a national and international clientele. is responsible for the development of technical and commercial proposals in accordance with the customer specifications including contract documents, initial cost analysis and executing key account management growth objectives. An understanding of the various power conversion systems that have been used in the mining, electrochemical and heavy industries is required. An understanding of the manufacturing of power conversion systems and a solid sales background in power electronic engineered products for high dollar value projects is a preferred. These skills need to include the understanding of technical specifications, drawings, tender documents, preparation/development of cost estimates, written proposals and sales presentations of both a technical & commercial nature. Experience Proven experience in the field of Power Electronics, specifically in high power conversion techniques, product application, sales/warranty administration and the implementation of strategies as they apply to the sale of the company s products. They should have proven skills in interfacing with customers, business units and product managers, and proven success in achieving corporate objectives and customer satisfaction. Individual needs to be a structured and organized self-starter who can work independently as well as in the team environment. This position requires national and international travel. Fluent in multiple languages is a plus. 5 years of experience in the field of Sales of Power Electronics with a Bachelor Degree in Electrical Engineering preferred specializing in Power Electronics and/or Electric Power Systems. Exempt Microsoft suite of PC programs is a requirement.
9 Sales Engineer Energy Storage Inverters and Controls The qualified candidate will be responsible for the sale of power conversion systems (inverters) and power electronic systems into the fast growing energy storage marketplace. The sales engineer will join a committed and energetic team as they continue to develop the energy storage power electronic marketplace, leveraging the strong and growing track record of Dynapower s leadership position in the US and Global energy storage marketplace. include supporting the existing client base and the development of new clients for the application of the company s power conversion technologies and energy storage systems. This position is responsible for the development of technical and commercial proposals in accordance with the customer specifications including contract documents, and initial cost analysis. This role will require travel and an account management focus. An understanding of the various power conversion systems that have been used in the renewable energy (specifically Wind and/or Solar) is required and energy markets, battery technology, and micro grids is preferred. An understanding of the manufacturing of power conversion systems and a solid sales background in power electronic or custom engineered products for high dollar value projects is a requirement. Excellent English language skills, both written and oral are a necessity in this position. These skills need to include the understanding of technical specifications, drawings, tender documents, reparation/development of cost estimates, written proposals and sales presentations of both a technical & commercial nature. Microsoft suite of PC programs is a requirement. Experience Proven capitol sales experience, ideally power conversion equipment, product application and improvements, sales/warranty administration and the implementation of organizational business strategies as they apply to the sale of the company s products is necessary. The qualified candidate should have proven communication skills in interfacing with customers, business units and product managers, and proven success in achieving corporate objectives and customer satisfaction. Individual needs to be a structured and organized self-starter who can work independently as well as in the team environment. This position requires national and international travel; sometimes on short notice. Fluency in multiple languages a plus. Focuses on Power Electronics, power system software, energy trading and/or Renewable energy systems, with a Bachelor Degree in Physics or Engineering specializing in drives, Power Electronics and/or Electric Power Systems ideal. Vermont based is preferred but flexibility exists over location with relocation paid.
Electronics Technology
Teacher Assessment Blueprint Electronics Technology Test Code: 5907 / Version: 01 Copyright 2011 NOCTI. All Rights Reserved. General Assessment Information Blueprint Contents General Assessment Information
More informationTransformerless UPS systems and the 9900 By: John Steele, EIT Engineering Manager
Transformerless UPS systems and the 9900 By: John Steele, EIT Engineering Manager Introduction There is a growing trend in the UPS industry to create a highly efficient, more lightweight and smaller UPS
More informationSummary for job description: AVIONICS ENGINEERS
Summary for job description: AVIONICS ENGINEERS Brief Job Description Install, inspect, test, adjust, or repair avionics equipment, such as radar, radio, navigation, and missile control systems in aircraft
More informationONR/NSF-Sponsored Faculty/Industry Workshop
ONR/NSF-Sponsored Faculty/Industry Workshop Reforming Power-Related Curriculum Power Electronics Presenter: Hariharan Krishnaswami Assistant Professor University of Texas at San Antonio New Electric Power
More informationPROGRAM CRITERIA FOR ELECTRICAL ENGINEERING TECHNOLOGY
PROGRAM CRITERIA FOR ELECTRICAL ENGINEERING TECHNOLOGY Scope These program criteria apply to programs having titles involving Electrical Engineering Technology including: electrical engineering, electrical
More informationHigh-Megawatt Converter Technology Workshop for Coal-Gas Based Fuel Cell Power Plants January 24, 2007 at NIST
Session 4a Enjeti 1 High-Megawatt Converter Technology Workshop for Coal-Gas Based Fuel Cell Power Plants January 24, 2007 at NIST Dr. Prasad Enjeti TI TI Professor Power Electronics Laboratory College
More informationOccupational Profile: Electrical & Electronics Engineering Technician
Occupational Profile: Electrical & Electronics Engineering Technician A competent Electrical & Electronics Engineering Technician should be able to demonstrate the following skills and competences: 1.
More informationControl of a Hybrid Energy System
Control of a Hybrid Energy System Michael Snow, B. Eng. P. Eng. Master of Engineering Candidate Supervisors: Tariq Iqbal Neil Bose Outline Introduction Background Problem Design Methodology Research Design
More informationElectronics Technology
Job Ready Assessment Blueprint Electronics Technology Test Code: 4035 / Version: 01 Copyright 2010. All Rights Reserved. General Assessment Information Blueprint Contents General Assessment Information
More informationResidential Solar Service Agreement (RSSA) Customer Sited Solar Photovoltaic Systems
Residential Solar Service Agreement (RSSA) Customer Sited Solar Photovoltaic Systems This Agreement is made and entered into this day of, 20, ( Effective Date ) by and between the Orlando Utilities Commission
More informationCOUNTY OF GRANDE PRAIRIE JOB DESCRIPTION
COUNTY OF GRANDE PRAIRIE JOB DESCRIPTION JOB TITLE: CURRENT CLASSIFICATION/GRID POSITION # Project and Regulatory Technologist TO Grid Level 5(d) #371 With ASET designation 6(b) #372 NOC CODE: 2264 STANDARD
More informationUnderstanding Delta Conversion Online "Power Regulation" - Part 2
Application Note #40 Understanding Delta Conversion Online "Power Regulation" - Part 2 Introduction This application note is the second in a series on delta conversion theory of operation. For complete
More informationWhite Paper: Pervasive Power: Integrated Energy Storage for POL Delivery
Pervasive Power: Integrated Energy Storage for POL Delivery Pervasive Power Overview This paper introduces several new concepts for micro-power electronic system design. These concepts are based on the
More informationProject description. Power Electronics for Reliable and Energy efficient Renewable Energy Systems
Project description Title: Power Electronics for Reliable and Energy efficient Renewable Energy Systems OBJECTIVES Principal objective Provide competence and decision basis for enabling reliable and energy
More informationCanadian Technology Accreditation Criteria (CTAC) ELECTRICAL ENGINEERING TECHNOLOGY - TECHNICIAN Technology Accreditation Canada (TAC)
Preamble Canadian Technology Accreditation Criteria (CTAC) ELECTRICAL ENGINEERING TECHNOLOGY - TECHNICIAN Technology Accreditation Canada (TAC) These CTAC are applicable to programs having titles involving
More informationExhibit F. VA-130620-CAI - Staff Aug Job Titles and Descriptions Effective 2015
Applications... 3 1. Programmer Analyst... 3 2. Programmer... 5 3. Software Test Analyst... 6 4. Technical Writer... 9 5. Business Analyst... 10 6. System Analyst... 12 7. Software Solutions Architect...
More informationTraining Systems for Renewable Energies. Acquiring Practical Skills and Project-oriented Expertise
Training Systems for Renewable Energies Acquiring Practical Skills and Project-oriented Expertise Qualifications through Quality Inexhaustible, sustainable, real the future is green The move away from
More informationCurrent: Our organization is currently losing one of our elite team members and we need to replace him.
Environmental Compliance Scientist Reports To: Compliance Manager Job Summary: Monitor and maintain our customer's water and wastewater discharge compliance requirements using our innovative predictive
More informationPrinciples of Adjustable Frequency Drives
What is an Adjustable Frequency Drive? An adjustable frequency drive is a system for controlling the speed of an AC motor by controlling the frequency of the power supplied to the motor. A basic adjustable
More informationRelease: 1. UEE41611 Certificate IV in Renewable Energy
Release: 1 UEE41611 Certificate IV in Renewable Energy UEE41611 Certificate IV in Renewable Energy Date this document was generated: 27 May 12 UEE41611 Certificate IV in Renewable Energy Modification History
More informationProject Management Support
Project Management Support Project management is the discipline of planning, organizing, securing, managing, leading, and controlling resources to achieve specific goals. A project is a temporary business
More informationPower Quality For The Digital Age INVERTING SOLAR POWER A N E N V IRONME N TA L P OT E N T I A L S W HI T E PA PER. www.ep2000.com 800.500.
Power Quality For The Digital Age INVERTING SOLAR POWER A N E N V IRONME N TA L P OT E N T I A L S W HI T E PA PER Introduction Heat in the System The modern facility has been revolutionized by advancements
More informationDevelopment of High Frequency Link Direct DC to AC Converters for Solid Oxide Fuel Cells (SOFC)
Development of High Frequency Link Direct DC to AC Converters for Solid Oxide Fuel Cells (SOFC) Dr. Prasad Enjeti Power Electronics Laboratory Department of Electrical Engineering College Station, TX -
More informationDC/DC BUCK Converter for Renewable Energy Applications Mr.C..Rajeshkumar M.E Power Electronic and Drives,
DC/DC BUCK Converter for Renewable Energy Applications Mr.C..Rajeshkumar M.E Power Electronic and Drives, Mr.C.Anandaraj Assistant Professor -EEE Thiruvalluvar college of Engineering And technology, Ponnur
More informationAN ULTRA-CHEAP GRID CONNECTED INVERTER FOR SMALL SCALE GRID CONNECTION
AN ULTRA-CHEAP GRID CONNECTED INVERTER FOR SMALL SCALE GRID CONNECTION Pramod Ghimire 1, Dr. Alan R. Wood 2 1 ME Candidate Email: pgh56@student.canterbury.ac.nz 2 Senior Lecturer: Canterbury University
More informationEMPLOYEE S NAME: Vacant BASIC FUNCTION
BASIC FUNCTION The incumbent is responsible for installation, operation, maintenance, and repair of the Mission s telecommunication systems, including the telephone infrastructure, radio program (including
More informationT146 Electro Mechanical Engineering Technician MTCU Code 51021 Program Learning Outcomes
T146 Electro Mechanical Engineering Technician MTCU Code 51021 Program Learning Outcomes Synopsis of the Vocational Learning Outcomes* The graduate has reliably demonstrated the ability to: 1. fabricate
More informationCOMMUNICATIONS SYSTEMS ANALYST 2 2168
COMMUNICATIONS SYSTEMS ANALYST 2 2168 GENERAL DESCRIPTION OF CLASS The COMMUNICATIONS SYSTEMS ANALYST 2 employs an extensive knowledge of electronics theory and practice while performing highly scientific
More informationBiomedical Engineering Technologist II. Total Points Rating 5 4 3 5 5 4 4 5 4 Points 233 67 19 24 150 87 83 107 43 813
Job Class Profile: Biomedical Engineering Technologist II Pay Level: CG-36 Pay Band: 790-813 Accountability & Decision Making Development and Leadership Environmental Working Conditions Factor Knowledge
More informationAPPLICATION NOTE USING A MODEL 3060-MS SERIES AS A REGENERATIVE AC SOURCE FOR PV INVERTER TEST APPLICATIONS. Abstract.
USING A MODEL 3060-MS SERIES AS A REGENERATIVE AC SOURCE FOR PV INVERTER TEST APPLICATIONS Abstract This application note describes the necessary procedure to use a standard Pacific Power Source Model
More informationTrainee Instrumentation / Electronics Engineering Technician. Technical Manager / Technical Supervisor
Job Description Job title: Department: Responsible to: Location: Trainee Instrumentation / Electronics Engineering Technician Faculty of Engineering & Design Technical Manager / Technical Supervisor Faculty
More informationDC Voltage Regulation by Buck Converter Applicable for Stand Alone Micro Hydro Power Generation
International Journal of Electronic and Electrical Engineering. ISSN 0974-2174, Volume 7, Number 1 (2014), pp. 37-42 International Research Publication House http://www.irphouse.com DC Voltage Regulation
More informationIntroduction for Photovoltaic Power System Test in China. Zou Xinjing Institute of Electrical Engineering Chinese Academy of Sciences Nov.
Introduction for Photovoltaic Power System Test in China Zou Xinjing Institute of Electrical Engineering Chinese Academy of Sciences Nov. 6, 2012 Content Testing Status of PV power systems in China Test
More informationSTATE OF NEVADA Department of Administration Division of Human Resource Management CLASS SPECIFICATION
STATE OF NEVADA Department of Administration Division of Human Resource Management CLASS SPECIFICATION TITLE GRADE EEO-4 CODE DIGITAL TELECOMMUNICATIONS SUPERVISOR 37 B 6.963 SERIES CONCEPT Digital Telecommunications
More informationElectrical Fitter. A competent Electrical Fitter is expected to:
Electrical Fitter A competent Electrical Fitter is expected to: 1. Work safely in teams and apply interpersonal skills in electrical engineering 2. Identify risks arising from electrical engineering activities
More informationEdmonton Catholic Schools is now accepting applications for the position of. A complete job description is shown below.
Edmonton Catholic Schools is now accepting applications for the position of For additional information on this position please contact Mariel Brochu at mariel.brochu@ecsd.net Please email a letter of interest
More informationTELECOMMUNICATIONS TECHNICIAN I/II/III
Monterey County TELECOMMUNICATIONS TECHNICIAN I/II/III 43L24 43L25 43L28 DEFINITION Under supervision, installs, tests, maintains, modifies, and repairs telephone signaling and electronic or digital private
More informationRelease: 1. UEE62111 Advanced Diploma of Engineering Technology - Electrical
Release: 1 UEE62111 Advanced Diploma of Engineering Technology - Electrical UEE62111 Advanced Diploma of Engineering Technology - Electrical Date this document was generated: 27 May 12 UEE62111 Advanced
More informationSOLAR PV-WIND HYBRID POWER GENERATION SYSTEM
SOLAR PV-WIND HYBRID POWER GENERATION SYSTEM J.Godson 1,M.Karthick 2,T.Muthukrishnan 3,M.S.Sivagamasundari 4 Final year UG students, Department of EEE,V V College of Engineering,Tisaiyanvilai, Tirunelveli,
More informationELECTRICAL & ELECTRONIC ENGINEERING A FUTURE IN
ELECTRICAL & ELECTRONIC ENGINEERING A FUTURE IN ELECTRICAL & ELECTRONIC ENGINEERING WHAT IS ELECTRICAL AND ELECTRONIC ENGINEERING? In a world where virtually nothing can be done without flicking a switch
More informationDevelopment of Grid-stabilization Power-storage Systems Using Lithium-ion Rechargeable Batteries
48 Development of Grid-stabilization Power-storage Systems Using Lithium-ion Rechargeable Batteries TSUTOMU HASHIMOTO *1 AKIO KURITA *2 MASAAKI MINAMI *3 MASAHIRO YOSHIOKA *2 KATSUAKI KOBAYASHI *4 MASAYUKI
More informationTHIS POSITION IS ONLY OPEN TO CLASSIFIED EMPLOYEES (NON-PROBATIONARY) IN THE FOPE UNTIL NOVEMBER 20, 2015
Human Resources Department 121 S.W. Port St. Lucie Blvd Port St. Lucie, FL 34984-5099 www.cityofpsl.com THIS POSITION IS ONLY OPEN TO CLASSIFIED EMPLOYEES (NON-PROBATIONARY) IN THE FOPE UNTIL NOVEMBER
More informationQuick Start Guide for High Voltage Solar Inverter DC-AC Board EVM. Version 1.3
Quick Start Guide for High Voltage Solar Inverter DC-AC Board EVM Version 1.3 Introduction This document talks about the quick start principles for the high voltage solar inverter DC-AC board. From this
More informationILLINOIS DEPARTMENT OF CENTRAL MANAGEMENT SERVICES CLASS SPECIFICATION COMMUNICATIONS EQUIPMENT TECHNICIAN SERIES
ILLINOIS DEPARTMENT OF CENTRAL MANAGEMENT SERVICES CLASS SPECIFICATION COMMUNICATIONS EQUIPMENT TECHNICIAN SERIES CLASS TITLE POSITION CODE COMMUNICATIONS EQUIPMENT TECHNICIAN I 08831 COMMUNICATIONS EQUIPMENT
More informationWeatherization COURSE CATALOG. Contents Weatherization Courses. 2-13 Energy Efficiency Courses..14-16
Weatherization COURSE CATALOG Contents Weatherization Courses. 2-13 Energy Efficiency Courses..14-16 Building Performance Institute/ Home Energy Professional Continuing Education Program Description: Weatherization,
More informationHybrid Power System with A Two-Input Power Converter
Hybrid Power System with A Two-Input Power Converter Y. L. Juan and H. Y. Yang Department of Electrical Engineering National Changhua University of Education Jin-De Campus, Address: No.1, Jin-De Road,
More informationperforms a variety of complicated tasks, may lead and direct the work of others, may report directly to a project
State of Iowa-IT Services-Position Descriptions Levels of Experience The following levels of experience apply to all job categories unless a job category details other requirements (example Data Entry).
More informationHarmonics and Noise in Photovoltaic (PV) Inverter and the Mitigation Strategies
Soonwook Hong, Ph. D. Michael Zuercher Martinson Harmonics and Noise in Photovoltaic (PV) Inverter and the Mitigation Strategies 1. Introduction PV inverters use semiconductor devices to transform the
More informationUMM AL-QURA UNIVERSITY
UMM AL-QURA UNIVERSITY College of Computer and Information Systems Computer Engineering Department 1403312 Digital Electronic Systems and Circuits Lab Manual Student Name: Student ID: Section: Group: Session
More informationLos Angeles Trade-Technical College Student Employment Center. Electrical Construction and Maintenance. Full Time
Job Title: Journeyman full time Job Number: 1401 Hours/Days: Varies Salary: $25-35/hr Approximate Location: Buena Park, CA Skills Requirement: 1-3 years experience, Commercial electrical work. Job Description:
More informationGrid Connected Storage Various Applications Realised with Proven Technologies. Wilhelm van Butselaar Clean Energy Week 2013, Brisbane July 2013
Grid Connected Storage Various Applications Realised with Proven Technologies Wilhelm van Butselaar Clean Energy Week 2013, Brisbane July 2013 Disclaimer IMPORTANT LEGAL NOTICE This presentation does not
More informationSmall Scale Renewable Energy Control Systems
Small Scale Renewable Energy Control Systems Brent Crowhurst Renewable Energy Program Coordinator Falls Brook Centre, New Brunswick, Canada Nordic Folkecenter for Renewable Energy November 2006 - April
More informationA universal forensic solution to read memory chips developed by the Netherlands Forensic Institute. The NFI Memory Toolkit II
A universal forensic solution to read memory chips developed by the Netherlands Forensic Institute The NFI Memory Toolkit II The NFI Memory Toolkit II The NFI Memory Toolkit II is a universal forensic
More informationENVIRONMENTAL, HEALTH AND SAFETY PERSONNEL MANAGEMENT LEVELING GUIDE
ENVIRONMENTAL, HEALTH AND SAFETY PERSONNEL MANAGEMENT LEVELING GUIDE Levels Job Codes Scope of Position Top Environmental Affairs Executive (Corporate) 1000 The most senior Environmental, Health and Safety
More informationIC 1101 Basic Electronic Practice for Electronics and Information Engineering
7. INDUSTRIAL CENTRE TRAINING In the summer between Year 1 and Year 2, students will undergo Industrial Centre Training I in the Industrial Centre (IC). In the summer between Year 2 and Year 3, they will
More informationBIOMEDICAL ENGINEERING TECHNICIAN SERIES
BIOMEDICAL ENGINEERING TECHNICIAN SERIES Occ. Work Prob. Effective Last Code No. Class Title Area Area Period Date Action 4549 Biomedical Engineering Technician I 02 032 6 mo. 07/15/11 Rev. 4550 Biomedical
More informationPhotovoltaic Solar Energy Unit EESFB
Technical Teaching Equipment Photovoltaic Solar Energy Unit EESFB Products Products range Units 5.-Energy Electronic console PROCESS DIAGRAM AND UNIT ELEMENTS ALLOCATION Worlddidac Member ISO 9000: Quality
More informationApplication Information Improving Efficiency in Smart Grid Applications With Fully Integrated Current Sensing ICs
Application Information Improving Efficiency in Smart Grid Applications With Fully Integrated Current Sensing ICs By Shaun Milano, and Andreas P. Friedrich Allegro MicroSystems Europe Focus on the Photovoltaic
More informationYield Reduction due to Shading:
1x4 1x16 10 x CBC Energy A/S x Danfoss Solar Inverters CBC-40W Poly 40 W TLX 1,5k 5 ; 1x11 3x4 0 1,5kW 1536 x CBC Energy A/S 1 x Power-One CBC-40W Poly 40 W TRIO-7,6-TL-OUTD 30 ; 4x14 0 7,6kW Location:
More informationYSmart Technology Co.,Ltd
YSmart Technology Co.,Ltd GWV Series Grid Tie Microinverter User Manual The copyright of this user manual belong to YSmart TechnologyCompany Limited. Without the written permission of the copyright holder,
More informationLEHI CITY POWER NET METERING STANDARDS For Customer-Owned Electric Generating Systems
LEHI CITY POWER NET METERING STANDARDS For Customer-Owned Electric Generating Systems A. General This Net Metering Standard for Customer-Owned Grid Connected Electric Generating Systems sets forth the
More informationJOB TITLE: CURRENT CLASSIFICATION/GRID POSITION # IT Tech II AD Grid Level 5(g) #123 Network Support Technician
COUNTY OF GRANDE PRAIRIE JOB DESCRIPTION JOB TITLE: CURRENT CLASSIFICATION/GRID POSITION # IT Tech II AD Grid Level 5(g) #123 Network Support Technician NOC CODE: 2281 STANDARD HOURS: 35 hours/week (non-management)
More informationControl Development and Modeling for Flexible DC Grids in Modelica
Control Development and Modeling for Flexible DC Grids in Modelica Andreas Olenmark 1 Jens Sloth 2 Anna Johnsson 3 Carl Wilhelmsson 3 Jörgen Svensson 4 1 One Nordic AB, Sweden, andreas.olenmark@one-nordic.se.
More informationWhite Paper. Fiber Optics in Solar Energy Applications. By Alek Indra. Introduction. Solar Power Generation
s in Solar Energy Applications White Paper By Alek Indra Introduction Solar energy has recently become a popular alternative energy source to meet demands around the world due to the fluctuation of oil/coal
More informationCivil Service Recruitment Ranks in Education Bureau. Post/Salary Entry Requirements Type of Work
Civil Service Recruitment Ranks in Education Bureau Post/Salary Entry Requirements Type of Work Assistant Primary School Master/Mistress Point 15 ($26,785) to Point 29 ($51,805) Assistant Education Officer
More informationCompendium to the National Technology Benchmarks - NTB 2010 TECHNICIAN
Compendium to the National Technology Benchmarks - NTB 2010 TECHNICIAN Reg d trademark of Canadian Council of Technicians and Technologists GENERAL PROGRAM CRITERIA FOR ALL DISCIPLINES Technician Level
More informationLiebert GXT MT+ CX UPS, 1000VA - 3000VA Intelligent, Reliable UPS Protection. AC Power for Business-Critical Continuity
Liebert GXT MT+ CX UPS, 1000VA - 3000VA Intelligent, Reliable UPS Protection AC Power for Business-Critical Continuity Liebert GXT MT+ CX UPS, 1000VA -3000VA Intelligent, Reliable UPS Protection Liebert
More informationWe are seeking a professional to redesign a website. We are wanting a brand new look and feel.
Job Type: Web Designer #6075 Duration: Contract to Hire We are seeking a professional to redesign a website. We are wanting a brand new look and feel. We are not looking for someone to make changes to
More informationJOB TITLE: CURRENT CLASSIFICATION/GRID POSITION # IT Tech I AD Grid Level 5(h) #68 (Service Desk)
COUNTY OF GRANDE PRAIRIE JOB DESCRIPTION JOB TITLE: CURRENT CLASSIFICATION/GRID POSITION # IT Tech I AD Grid Level 5(h) #68 (Service Desk) NOC CODE: 2171 STANDARD HOURS: 35 hours/week (non-management)
More informationContactless Power Transfer : Inductive charging of EV
Contactless Power Transfer : Inductive charging of EV 7-12-2010 P.Bauer Delft University of Technology Challenge the future EV have to be charged December 7, 2010 2 2 Chicken and egg problem December 7,
More informationSafe, Simple & Complete Solutions for Renewable Energy
Safe, Simple & Complete Solutions for Renewable Energy SAFE. SIMPLE. COMPLETE. Optimize your renewable energy power generation capacity through the reliability and expertise of a Cooper Bussmann protected
More informationElectrical/Electronics Technology Diploma
D 35 22 0 Electrical/Electronics Technology Diploma Concentration Overview The Electrical/Electronics Technology curriculum is designed to provide training for persons interested in the installation and
More informationA MULTILEVEL INVERTER FOR SYNCHRONIZING THE GRID WITH RENEWABLE ENERGY SOURCES BY IMPLEMENTING BATTERY CUM DC-DC CONERTER
A MULTILEVEL INVERTER FOR SYNCHRONIZING THE GRID WITH RENEWABLE ENERGY SOURCES BY IMPLEMENTING BATTERY CUM DC-DC CONERTER 1 KARUNYA CHRISTOBAL LYDIA. S, 2 SHANMUGASUNDARI. A, 3 ANANDHI.Y 1,2,3 Electrical
More informationUnit/Standard Number. High School Graduation Years 2010, 2011 and 2012
1 Secondary Task List 100 SAFETY 101 Demonstrate an understanding of State and School safety regulations. 102 Practice safety techniques for electronics work. 103 Demonstrate an understanding of proper
More informationLow Cost Pure Sine Wave Solar Inverter Circuit
Low Cost Pure Sine Wave Solar Inverter Circuit Final Report Members: Cameron DeAngelis and Luv Rasania Professor: Yicheng Lu Advisor: Rui Li Background Information: Recent rises in electrical energy costs
More informationRelease: 1. UEE60211 Advanced Diploma of Electronics and Communications Engineering
Release: 1 UEE211 Advanced Diploma of Electronics and Communications Engineering UEE211 Advanced Diploma of Electronics and Communications Engineering Date this document was generated: 25 September 12
More informationARRA Grant Case Studies SMUD s Smart Grid Program
. ARRA Grant Case Studies SMUD s Smart Grid Program Jim Parks December 2012 Powering forward. Together. About SMUD 600,000 customers 1.4 million population $1.4 billion in revenues 900 mi 2, 2331 km 2
More informationWhat Is Regeneration?
What Is Regeneration? Braking / Regeneration Manual Regeneration Overview Revision 1.0 When the rotor of an induction motor turns slower than the speed set by the applied frequency, the motor is transforming
More informationFederal Wage System Job Grading Standard for Electrical Equipment Repairing, 2854. Table of Contents
Federal Wage System Job Grading Standard for Electrical Equipment Repairing, 2854 Table of Contents WORK COVERED... 2 WORK NOT COVERED... 2 TITLES... 3 GRADE LEVELS... 3 HELPER AND INTERMEDIATE JOBS...
More informationO&M Service for Megasolar Power Plants and Precise Monitoring Techniques for PV Modules
403 Hitachi Review Vol. 63 (2014), No. 7 Featured Articles O&M Service for Megasolar Power Plants and Precise Monitoring Techniques for PV Modules Tohru Kohno Tetsuharu Ohya Tomoharu Nakamura OVERVIEW:
More informationJob Description. Essential Job Functions and Responsibilities
Job Title: Human Resources Clerk Department: Human Resources Reports To: Human Resources Director Salary Grade/Salary Range: 6 ($2258-$3606) Revision : 05/2014 Job Description Position Summary In accordance
More informationIEEE - IBM Smarter Planet Challenge. Smart Energy Saving System. 1. Project Description
IEEE - IBM Smarter Planet Challenge Smart Energy Saving System 1. Project Description Motivation - We live in a world with high costs of electricity. Burning fuel, coal, and petroleum produces electricity
More informationPSE 6031 SYLLABUS (Tentative)
PSE 6031 SYLLABUS (Tentative) Power Electronics (3 credits) Friday Afternoon: 1:00-3:00 PM 15 Virtual Class Meetings (no face-face meetings) Pre-requisites: All coursework to qualify for the upper division
More informationPublic Overview of the EMerge Alliance Data/Telecom Center Standard Version 1.0
of the EMerge Alliance Data/Telecom Center Standard Version 1.0 A standard defining low voltage dc power distribution system requirements for use in data centers and telecom central offices Excerpted With
More informationBUILD VERSUS BUY. Understanding the Total Cost of Embedded Design. www.ni.com/buildvsbuy
BUILD VERSUS BUY Understanding the Total Cost of Embedded Design Table of Contents I. Introduction II. The Build Approach: Custom Design a. Hardware Design b. Software Design c. Manufacturing d. System
More informationAnalog Electronics I. Laboratory
Analog Electronics I Laboratory Exercise 1 DC Power Supply Circuits Aim of the exercise The aim of this laboratory exercise is to become familiar with rectifying circuits and voltage stabilization techniques
More informationCHALLENGER INSTITUTE OF TECHNOLOGY. Applied Engineering
CHALLENGER INSTITUTE OF TECHNOLOGY Applied Engineering 2 Applied Engineering Graduates with real opportunities Challenger Institute s engineering training capitalises on its close liaison with industry
More informationE&I MAINTENANCE ENTRY TEST ENABLING OBJECTIVES. DESCRIBE hazards and precautions taken to avoid injury in the workplace.
SAFETY Industrial DESCRIBE hazards and precautions taken to avoid injury in the workplace. Example #1: All of the following are common PPE used to perform maintenance activities EXCEPT: a. Safety Glasses
More informationDesign a Phase Interleaving PFC Buck Boost Converter to Improve the Power Factor
International Journal of Innovation and Scientific Research ISSN 2351-8014 Vol. 11 No. 2 Nov. 2014, pp. 445-449 2014 Innovative Space of Scientific Research Journals http://www.ijisr.issr-journals.org/
More informationOptimizing Energy Operations with Machine-to-Machine Communications
Optimizing Energy Operations with Machine-to-Machine Communications Contents Executive Summary... 3 The Role of M2M in Energy Companies... 3 Leveraging a M2M Platform... 5 Key Requirements for M2M Application
More informationDesign Project: Power inverter
Design Project: Power inverter This worksheet and all related files are licensed under the Creative Commons Attribution License, version 1.0. To view a copy of this license, visit http://creativecommons.org/licenses/by/1.0/,
More informationOntario Electrical Safety Code 25 th Edition/ 2012
Ontario Electrical Safety Code 25 th Edition/ 2012 Ted Olechna Director, Codes and Standard Chief Engineer 1 What I Will Cover ESA s role is as the regulator Highlight of 2012 Code changes The Code and
More informationDesign, Analysis, and Implementation of Solar Power Optimizer for DC Distribution System
Design, Analysis, and Implementation of Solar Power Optimizer for DC Distribution System Thatipamula Venkatesh M.Tech, Power System Control and Automation, Department of Electrical & Electronics Engineering,
More informationModular architecture for high power UPS systems. A White Paper from the experts in Business-Critical Continuity
Modular architecture for high power UPS systems A White Paper from the experts in Business-Critical Continuity Abstract Today, more than ever before, energy efficiency and cost-savings are among the top
More informationCOMMUNICATIONS SERVICES SPECIALISTS SERIES
COMMUNICATIONS SERVICES SPECIALISTS SERIES Occ. Work Prob. Effective Code No. Class Title Area Area Period Date 4778(3296) Communications Services Specialist I 02 730 6 mo. 11/15/00 4779(3296) Communications
More informationLabor Category For MOBIS SIN 874-1:
Following are the Contractor Site and Government Site Labor Categories for SIN 874-1. Please do not hesitate to contact us at gsamobis@amdexcorp.com if you have any questions. Labor Category For MOBIS
More informationNational Certificate in Electrical Engineering (Electrician for Registration) (Level 4)
NZQF NQ Ref 1195 Version 3 Page 1 of 11 National Certificate in Electrical Engineering (Electrician for Registration) (Level 4) Level 4 Credits 249 This qualification has been reviewed. The last date to
More informationLos Angeles Trade Technical College Student Employment Center. Automotive and Related Technology. Full Time
Full Time Job Title: Mechanic Job Number: 1648 Hours/Days: Mon-Fri Salary: $17.00 Downey, CA Minimum requirements: Class A Mechanic, DOT inspection qualified, DOT qualified to perform annual brake inspections.
More informationFiber Optic and Isolation Solutions for Renewable Energy Applications
and Isolation Solutions for Renewable Energy Applications Your Imagination, Our Innovation Sense Illuminate Connect Avago Technologies offers a wide range of fiber optic transmitters, receivers, and transceivers,
More informationCUTES Solar Power System
Solar Power System Solar power systems provide a continuous, reliable power solution that's easily deployed, cost-effective and requires little maintenance. Solar Power Systems are complete, fully integrated
More information