CROSSING SIGNALIZATION
SYSTEM PURPOSE SYSTEM PURPOSE The Haga crossing signalization clic para system is modificar designed to alert pedestrians el and es0lo trucks at intersec0ons with poor visibility. The system can be installed with many varia0ons depending on the solu0on required. ForkliIs can trigger signals as can Pedestrians with key fobs. The solu0on is en0rely based on PAS technology. ICNITA SAFETY, 2
APPLICATION AREAS APPLICATION AREAS Crossings Haga with clic poor visibility para modificar el es0lo Pedestrian walkways Intersec0ons Doors ICNITA SAFETY, 3
OPERATION FORKLIFT FORKLIFT CROSSINGS ForkliIs trigger a signal on either side of wall using a TZ2 Tag ForkliIs are fiqed with a normal PAS kit TZ2 Tags are fiqed to the wall When either forklii comes into range of thetz2 Tag it will trigger a flashing or traffic light around the other side of the intersec0on to alert the oncoming forklii that a forklii is approaching With this setup a pedestrian will also be detected when normally in any other area of the facility ICNITA SAFETY, 4
OPERATION FORKLIFT FORKLIFT CROSSINGS ForkliIs trigger a signal on either side of wall using an Ac0vator AC- 50 rear of the forklii ForkliIs are fiqed with a TZ- 50 Tag at the An Ac0vator AC- 50 is fiqed to a wall When a forklii comes into range of the Ac0vator AC- 50 it will trigger a flashing or traffic light around the other side of the intersec0on to alert this oncoming forklii that another forklii is approaching With this setup a pedestrian will not be detected when in any other area of the facility ICNITA SAFETY, 5
OPERATION PEDESTRIAN FORKLIFT CROSSINGS ForkliI triggers a signal using a TZ2 Tag ForkliIs are fiqed with a normal PAS kit A TZ2 Tag is fiqed to the wall When a forklii comes into range of thetz2 Tag it will trigger a flashing or traffic light around the other side of the intersec0on to alert the oncoming pedestrian that a forklii is approaching With this setup a pedestrian will also be detected when normally in any other area of the facility ICNITA SAFETY, 6
OPERATION PEDESTRIAN FORKLIFT CROSSINGS Pedestrian triggers a signal using an Ac0vator AC- 50 Haga clic para modificar Pedestrian wears el the es0lo T- 10 key fob An Ac0vator AC- 50 is fiqed to the wall When a pedestrian comes into range of the Ac0vator AC- 50 it will trigger a flashing or traffic light around the other side of the intersec0on to alert the approaching oncoming forklii that a pedestrian is With this setup a pedestrian will not be detected when in any other area of the facility ICNITA SAFETY, 7
OPERATION PEDESTRIAN FORKLIFT CROSSINGS ForkliI triggers a signal using an Ac0vator AC- 50 Haga clic para modificar el es0lo rear of the forklii ForkliIs are fiqed with a TZ- 50 Tag at the An Ac0vator AC- 50 is fiqed to a wall When a forklii comes into range of the Ac0vator AC- 50 it will trigger a flashing or traffic light around the other side of the intersec0on to alert the oncoming pedestrian that a forklii is approaching With this setup a pedestrian will not be detected when in any other area of the facility ICNITA SAFETY, 8
INSTALLATION AC- 50 INSTALLATION The ac0vator AC- 50 must be installed in a fixed area of the crossing (wall, shelf or ceiling), and must be powered by a AC / DC 24 Volt power supply Both LF antennas can be used to extend the detec0on zone. The en0re length of the antenna cable can be used to adjust the posi0on of the detec0on zone. The alarm signal has to be placed in the area of the intersec0on with poor visibility. ICNITA SAFETY, 9
INSTALLATION TZ2- TAG INSTALLATION The TZ2- Tag must be installed on the wall, shelf or ceiling. It must be supplied with 24V (requires converter DC / DC) Maximum detec0on range: 5m ICNITA SAFETY, 1 0
INSTALLATION TZ- TAG INSTALLATION The TZ- Tag is installed on the truck, far away from the metal parts. It must be supplied with 24V (requires converter DC / DC) Maximum detec0on range: 5m ICNITA SAFETY, 1 1