Tuesday, 24 November 2015 Short Course on Multiphase Flows 08:30 09:15 Registration 09:15 09:25 D. Lucas Rossendorf Welcome 09:25 10:20 G. Scheuerer ANSYS Germany, Otterfing Mathematical Models for Multiphase Flows: Overview & Basic Equations 10:20 10:30 10:30 11:35 T. Esch ANSYS Germany, Otterfing Lagrangian Two-Phase Flow Modelling 11:35 11:45 11:45 12:50 U. Hampel 12:50 14:00 Measurement Techniques and Experimental Investigations for Multiphase Flows 14:00 15:05 G. Scheuerer ANSYS Germany, Otterfing Eulerian Multiphase Flow Modelling: Phase Interaction Models 15:05 15:15 15:15 16:20 E. Krepper 16:20 16:30 Rossendorf Interfacial Heat and Mass Transfer Models 16:30 17:30 T. Esch & G. Scheuerer ANSYS Germany, Otterfing Practical Demonstration of Eulerian & Lagrangian CFD Simulation 17:30 18:15 All 18:15 Discussion, Questions & Answers Transfer to Dresden 19:00 Short Course Dinner @ Restaurant "Schillergarten"
Wednesday, 25 November 2015 - Multiphase Flow Conference - Session 1 Short Course on Multiphase Flows - Simulation Branch 09:00 09:50 E. Krepper 09:50 10:00 10:00 10:50 T. Höhne 10:50 11:00 11:00 12:00 D. Lucas 12:00 13:00 Dispersed Flow Modelling - Multiple-Size Group Modelling - MUSIG Stratified & Segregated Flow Modellig - Interfacial Area Density Models - AIAD Multi-Scale Modelling Techniques - GENTOP Short Course on Multiphase Flows - Experimental Branch 09:00 12:00 U. Hampel & E. Schleicher Interactive Seminar on the Application of Two-Phase Flow Measuring Techniques - Wire-Mesh Sensors & Gamma CT 12:00 13:00
12:30 13:00 Registration Conference Wednesday, 25 November 2015 - Multiphase Flow Conference - Session 1 G. Scheuerer ANSYS Germany, Otterfing 13:00 13:10 G. Gerbeth 13:10 14:00 T. Sattelmayer Technische Universität München, München Welcome Keynote - Shortfalls and Improvements in CFD Modelling of Critical Heat Flux 14:00 14:30 E. Menter General Electric, Garching Two-Phase Flow Modelling in Helico-Axial Pumps 14:30 15:00 S. Ketterl 15:30 15:50 Universität der Bundeswehr München, Neubiberg Towards Large Eddy Simulation of Liquid Jet Atomization: DNS and a-priori Subgrid Analysis D. Lucas Multiphase Flow Conference - Session 2 15:50 16:40 N. G. Deen Technische Universiteit Eindhoven, Eindhoven Keynote: Bubbles on the Cutting Edge, or How to Intensify Bubble Columns 16:40 17:10 S. Waldeck Universität Bremen, Bremen Multiphase Investigation of Intensive Quenching with Waterjets 17:15 19:00 19:00 20:00 22:30 Visit of the Experimental Facilities @ Institute of Fluid Dynamics Transfer to Dresden Conference Dinner @ Restaurant "Sophienkeller"
Thursday, 26 November 2015 E. Krepper Multiphase Flow Conference - Session 3 08:30 09:00 N. Vogl SMS Group, Düsseldorf Multiphase Flow Simulation of a Steelmaking Ladle 09:00 09:30 H. Yang Forschungszentrum Jülich, Jülich Modeling Liquid Metal Droplet Collisions in the Slag Cleaning Process 09:30 10:00 C. Boffa 10:00 10:15 Technische Universität München, München A 1D Multiphase Mixture Model for Flows in Porous Media: Model Development Multiphase Flow Conference - Session 4 T. Esch ANSYS Germany, Otterfing 10:15 10:45 K. Amend 10:45 11:15 P. S. Weber 11:15 11:45 J. Kim 11:45 12:15 S. Meyer FES, Zwickau Universität der Bundeswehr München, Neubiberg Technische Universität Darmstadt, Darmstadt Seoul National University of Science and Technology, Seoul Influence of the Contact Angle Model on Gravity-Driven Water Films An ALE Interface Tracking Method for Species Transfer of Rising Bubbles Numerical Simulation of Upward Bubbly Pipe Flows Using Two-Fluid Models Multiphase CFD-Analysis for Filling of an Automotive SCR Tank System under Extreme Conditions with ANSYS Fluent as an Alternative to Tests for Trend Analysis and Optimization 12:15 13:15
T. Höhne Multiphase Flow Conference - Session 5 13:15 13:45 M. Momeni Grundfos Holding, Bjerringbro On Site Electrochlorination 13:45 14:15 G. M. Osnaya Chavero 14:15 14:45 P. Bartsch Instituto Politécnico Nacional, Ciudad de Mexico Deutsches Zentrum für Luft- und Raumfahrt (DLR), Stuttgart 14:45 15:15 M. Salehi Technische Universität Berlin, Berlin CFD Modeling of a Liquid-Solid Downflow Fluidized Bed Bioreactor Flow Field and Heat Transfer in Moving Bed Heat Exchangers A Continuous Model Approach and Experimental Comparison CFD Simulation of Bubbling Fluidized Bed: The Effect of Wall Boundary Conditions on Solid Flow Behaviour 15:15 15:30 R. Rzehak 15:30 16:00 D. Bauer Technische Universität Bergakademie Freiberg, Freiberg Characterisation of a Cavitating Pipe Flow Using X-Ray Computed Tomography (CT) 16:00 16:30 J. Schlottke MAHLE Behr, Stuttgart Investigation of a Viscous Coupling using CFD Validated by Enhanced Tomographics Imaging Techniques 16:30 17:00 T. Frank ANSYS Germany, Otterfing Investigation of the Hydraulic Flip Phenomenon for Diesel Fuel Cavitation in a Planar Injection Nozzle 17:00 Farewell