Welcome to the image presentation Referee: Thomas Kalthoff, Management Assistant
Welcome at Welcome at Allow us to introduce ourselves: We are an owner-managed, medium-sized company. Our company is managed by Juergen and Kai Kalthoff. At present we employ about 300 people in Eisenberg/Pfalz and in Zittau. We produce electrotechnical systems and offer a large range of products. Our four main product ranges are: CEEtyp Plugs & Sockets PROCON Industrial Connectors e-mobility Power Distributors for Outside Areas
An innovative traditional enterprise It all began in 1897 in Grimma near Leipzig with the company foundation by Ferdinand Walther. He was the first to develop CEE devices. Thus Walther is the manufacturer with the longest tradition and experience in the CEE plugs & sockets sector. 115 years are a respectable age for an enterprise. We take pride in our long company tradition and in the fact that thanks to our commitment and good ideas we have always been able to successfully master even times of crisis. Tradition is continuous innovation Progress is the realisation of ideas the proof of this is our uniquely wide Carlo Petrini range of products. Walther-Werke in Grimma around 1935
Headquarters to 2010 2010 on on 14.500 11.500 m² Headquarters in in Eisenberg Eisenberg up from
2001: Inclusion of the company Bosecker into the Walther group of companies
Since 115 years qualitycurrently made inon Germany Headquarters in Eisenberg, 14.500 m² certified acc. to DIN EN ISO 9001 : 2000 with IEC / CENELEC / VDE
WALTHER subsidiaries France F. Walther Sarl Zone Industrielle de Dorignies 100, Rue Edouard Branly F-59500 Douai contact@walther-fr.com www.walther-fr.com Great Britain F. Walther Electrics Ltd. Unit 4, Cromwell Trading Estate Cromwell Road GB-Bredbury, Stockport Cheshire SK6 2RF mail@walther.demon.co.uk Austria Walther Electric GmbH Zweigniederlassung Salzburg Bayernstraße 39 A-5071 Wals-Siezenheim mail@schurrer.at www.walther-werke.de USA F. Walther Electric Corp. 12 World s Fair Drive Unit F USA-Somerset, NJ 08873 info@waltherelectric.com www.waltherelectric.com
Modern eroding tools 3D-based construction Powerful injection moulding machines
4 product lines... CEEtyp Plugs & Sockets PROCON Industrial Connectors e-mobility Power Distributors for Outside Areas
e-mobility
for Power distributors outside areas
Plugs & sockets Industrial connectors Plugs & Sockets (acc. to IEC 309) Designed for plugging and withdrawing under load Used for power supply and distribution Industrial Connectors Must not be disconnected under load! Main application is the transmission of control signals
CEEtyp connection techniques Screw terminal connection...... and IDC insulation displacement connection
Plugs - features Turning down the cable gland provides both for strain relief and protection degree in one work step only
Screwless "World Champion Plug" even faster, even safer Plug & Coupler IP 44 Assembly accomplished in only 21 sec.! (internal record 17 sec.)
CEEtyp insulation displacement connection IDC contacts: steady contact pressure Distributor ring (sectional view): wires are automatically bent by 180 no wire stripping
Plug & Coupler IP 67
NORVO extra low voltage devices Connectors for extra low voltage up to 50 Volt Available in 24 V and 42 V AC and 42 V DC 2 or 3 Poles (without earth contact not required for low voltage) 16 A and 32 Amp Frequencies 50/60 Hz, 100/200 Hz, 300 Hz, 400 Hz, > 400/500 Hz Wall Socket Appliance Inlet Plug Coupler Panel Socket
The new: Wall sockets and wall mount appliance inlets 16 A and 32 A Plugs & sockets, 63 A extend Walther s current design family The new 63 A plugs and sockets have a twocomponent gasket - both the IP 44 and the IP 67 version Plugs & Sockets Wall sockets and wall mount appliance inlets In installation 16the A and 32 A sector, WALTHER s new 63 A plugs and couplers help speed up assembly. will be available by the end of 2012 This is made possible by an exterior strain relief integrated into the cable gland of these plugs and couplers. The products supplement the current WALTHER design family and both the IP44 and IP67 version come with a two-component gasket. Lockable bayonet ring, IP 67 version prevents unauthorised current drain Plugs & Sockets The new wall sockets & wall mount appliance inlets offer clever solutions in an elegant design.
N EW Coupler & Plug 63 A IP 67
NE W
Socket combinations
Combinations flanged acc. to customers' requirements Mobile power supply
Energy and data network international plug systems Multi combi the complete solution
NEW: CEEtyp socket combinations 680 Deeper enclosure bottom allows for more industrial solutions The main idea behind Walther socket combinations is the enclosure modularity. Cable grommets for cable Ø of 14-58 mm Due to an extensive range of enclosures, the manifold equipment requirements of our customers can be met.
NEW: CEEtyp socket combinations 680 Deeper enclosure bottom allows for more industrial solutions Isolating transformers up to 1,5 kva mountable LV HRC fuse switch disconnector size 00 can be integrated in the socket combination Supply cables with cross sections up to 95 mm² can be connected Enclosure 682 Dimensions: H x W x D: 404 x 290 x 171 mm Enclosure 682 TB Dimensions: H x W x D: 404 x 290 x 212 mm
NEW Separate cable entries for high and low voltage current. Combined equipment with communication connections and sockets feasible. The new suspension-type combinations - maxi can be equipped with: Walther solid rubber power strip complies with BGI 608 Space for DIN-rail mounted devices on both sides up to max. 2 x 9 MCB module widths CEE panel sockets up to 63 A Supply lines up to 16 mm² cross section Data sockets
Suspension-type combinations NEW 2 transparent covers, width 9 MCB units 2 air connections (protective gas) sockets up to 63 A installation of low-voltage transformers up to 250 VA possible maximum cable cross section 16 mm² maximum cable gland M 40
Industrial Connectors
Procon connection techniques Screw terminals Crimp terminals IDC insulation displacement connection Push-In connection
saves t he pane l ho u sing Flange set for s witch cabinet mountin g Industrial Connectors
Procon sample case Housings Wall mount housing Panel mount housing Hood Single lever locking Double lever locking Central locking Screw-locked hood Hood with bayonet lock Housing with self-closing cover Inserts Screw insert Crimp insert IDC insert Crimp contacts, tools
Industrial connectors New housing design: B6, B10, B16 + B24 wall mount housings + hoods NEW
New ergonomic housing design Improved grip makes plugging and withdrawing even easier Push-in terminals the modern and timesaving termination method Central locking system easier handling due to ergonomic design
e-mobility
Wall boxes for charging of electric vehicles e-mobility
Wall boxes for charging of electric vehicles e-mobility
Charging stations for electric vehicles
Charging stations for electric vehicles
Cabinets with lockers, in which the Pedelec battery can be charged via charging device e-mobility Pedelec cabinets
Stromtankstellen für Charging stations die unterschiedlichsten for many different Anwendungsbereiche application areas The wide scale of charging stations for electric vehicles is supplemented by stainless steel cabinets for e-bikes, so-called pedelecs. Walther pedelec cabinets are connected either to the public or the customer s energy supply. Ladeleitungen von Mode from 2Charging bis Modecables 3 mode 12 und to mode (Type Type32) (type 1 and type 2) e-mobility WALTHER charging stations are suitable for charging one or more electric vehicles with up to 63 A. They can be flexibly configured and equipped. Furthermore wall boxes, charging cables and special solutions for testing and simulation purposes are available, which have been developed according to customers specifications.
for Power distributors Power distributors for outside outsideareas areas
Power Modular distributors power fordistributors outside areas
For increased closure security, the door lock of the new distributor is equipped with a latch bolt with additional spring lock. With the new Opticon underframe, cable strain relief is simplified. The open bottom of the distributor facilitates the supply line connection, which can be inserted from the front instead of from below. The socket mounting panel is inclined for convenient plugging & minimises the risk of injury. Power distributors for outside areas Walther has extended its range of power distributors for outside areas by the new Opticon series. The Opticon housing design provides a high degree of user-friendliness: optimized ease of plugging, ample wiring space, particularly safe door mechanism and better transportability. The new Opticon underframe provides for improved cable strain relief and the open bottom of the distributor facilitates the supply line connection. Thanks to a robust and particularly large recessed grip, it is possible to open and close the door quickly and safely even with work gloves on.
CEEtyp Made PROCON in Power distributors Germany e-mobility
WALTHER Your strategic partner: with a unique production depth and width everything from one source Made in Germany Walther-Werke Ferdinand Walther GmbH everything produced in-house Ramsener Str. 6 67304 Eisenberg/Pfalz Tel. +49 (0) 6351 / 475-0 Fax: +49 (0) 6351 / 475-227 certified acc. to DIN EN ISO 9001 : 2000 www.walther-werke.de with IEC / CENELEC / VDEmail@walther-werke.de
Thank you very much for your attention! thomas.kalthoff@walther-werke.de