Ø 5 ±. DC Electropumps Bull,5 Rotation,5 5,7
Email: sales@hydronit.com Fax B... Electro pumps Bull series MODEL CODE EPB,5 DC /S5 K, V** Electro Pump Bull series Gear pump displacement (cc/rev (see tables E..: Dc electric motor power (kw and type (see tables E..:,5 DC (/T/S:,5kW VDC (/thermal switch/start switch,5 DC (/T/S:,5kW VDC (/thermal switch/start switch,5 DC (/T/S:,5kW VDC (/thermal switch/start switch,5 DC (/T/S:,5kW VDC (/thermal switch/start switch, DC (/T/S:,kW VDC (/thermal switch/start switch, DC (/T/S:,kW VDC (/thermal switch/start switch Optional Starting Switch: (see tables E..: /S5: 5 A starting switch (for Ø motors Optional Relief Valve (see tables E..: V bar V bar V5 5 bar V5 7 5 bar K,, K,, K,, K,, K,,7 K,, K,, K,, K,7,7 K,, B...
Email: sales@hydronit.com Fax B... Electro pumps Bull series Option: foot mounting MODEL CODE EPB, DC /S5 K, V** Electro Pump Bull series E5 Option: foot mounting Gear pump displacement (cc/rev (see tables E..: Dc electric motor power (kw and type (see tables E..:, DC (/T/S:,kW VDC (/thermal switch/start switch, DC (/T/S:,kW VDC (/thermal switch/start switch, DC (/T/S:,kW VDC (/thermal switch/start switch Optional Starting Switch: (see tables E..: /S5: 5 A starting switch (for Ø motors Optional Relief Valve (see tables E..: V bar V bar V5 5 bar V5 7 5 bar K,,7 K,, K,, K,, K,7,7 K,, K,7, K,, K5,, K,, K7,, B...
Email: sales@hydronit.com Fax B... Electro pumps Bull 5 series Option: foot mounting MODEL CODE EPB5, DC /S K,7 V** Electro Pump Bull 5 series E5 Option: foot mounting Gear pump displacement (cc/rev (see tables E..: Dc electric motor power (kw and type (see tables E..:, DC (/T/S:,kW VDC (/thermal switch/start switch, DC (/T/S:,kW VDC (/thermal switch/start switch Optional Starting Switch: (see tables E..: /S: A starting switch (for Ø 5 motors Optional Relief Valve (see tables E..: V bar V bar V5 5 bar V5 7 5 bar K,,7 K,, K,, K,, K,7,7 K,, K,7, K,, K5,, K,, K7,, B...
Email: sales@hydronit.com Fax B... Electro pumps Bull 5 series MODEL CODE EPB5,HD DC /S K, V** Electro Pump Bull 5 series E5 Option: foot mounting Gear pump displacement (cc/rev (see tables E..: Dc electric motor power (kw and type (see tables E..:,5HD DC (/T/S:,5kW VDC (/thermal switch/start switch,hd DC (/T/S:,kW VDC (/thermal switch/start switch,hd DC (/T/S:,kW VDC (/thermal switch/start switch Optional Starting Switch: (see tables E..: /S: A starting switch (for Ø 5 motors Optional Relief Valve (see tables E..: V bar V bar V5 5 bar V5 7 5 bar K,,7 K,, K,, K,, K,7,7 K,, K,7, K,, K5,, K,, K7,, B...
Email: sales@hydronit.com Fax B... EPB DC motors Starting switch option 5 5,5,5 Protection degree: IP5 Insulation class: F M,5 Ø Thermal protection option Ø,5 Ø Ø7,5,5 Rotation Weight:, kg Permanent magnets Code Nominal duty cycle 5W V DC motor,5 DC MCS5 5W V DC motor,5 DC MCS5 W V DC motor, DC MCS W V DC motor, DC MCS 5W V DC motor with thermal protection,5 DC/T MCST 5W V DC motor with thermal protection,5 DC/T MCST 5W V DC motor with thermal protection,5 DC/T MCST5 5W V DC motor with thermal protection,5 DC/T MCST5 W V DC motor with thermal protection, DC/T MCST W V DC motor with thermal protection, DC/T MCST S: min : % ED S: min : % ED S: min : % ED S: min : % ED S: min : 5% ED S: min : 5% ED S: min : % ED S: min : % ED S: min : % ED S: min : % ED Nominal Nominal speed current rpm A rpm 5 A rpm A rpm A rpm A rpm 5 A rpm A rpm 5 A rpm A rpm A Options or V DC 5 Amp start switch mounting kit Remote wired control with two buttons and m cable (see U.. S5 DC S5 DC P M7SC M7SK (V DC M7SC M7SK(V DC P (single acting P P (double acting Notes: the starting switch mounting kit is provided when specifying the /S5 in EPB. When ordering spare starting switches, it must be ordered separately (code: M7SK. Coupling Coupling for Ø DC motors and gr. pump Note: the coupling is already included when specifying the motor in EPB. E7 Flange Flange for Ø DC motors and gr. pump E Note: the flange is already included when specifying the motor in EPB assembly code. B...
Email: sales@hydronit.com Fax B... EPB DC motors Starting switch option M Ø Ø Ø, Thermal protection option Ø 5 ±. Rotation,5 Compound wound Protection degree: IP5 Insulation class: F Weight: 7,5 kg 7,5 5,7 Code W V DC motor, DC MCS W V DC motor, DC MCS W V DC motor with thermal protection, DC/T MCST W V DC motor with thermal protection, DC/T MCST W V DC motor with thermal protection, DC/T MCST Nominal duty cycle S: min : 7,5% ED S:,min :,5% ED S: min : 7,5% ED S:,min : 7,5% ED S:,min :,5% ED Nominal Nominal speed current rpm A rpm A rpm A rpm A rpm A Options Starting switch 5A or V DC mounting kit DC motors plastic cover S5 DC S5 DC M7SC M7SK (V DC M7SC M7SK(V DC F F Notes: the starting switch mounting kit is provided when specifying the /S5 in EPB. When ordering spare starting switches, it must be ordered separately (code: M7SK. Coupling Coupling for Ø Ø5 DC motors and gr. pump Note: the coupling is already included when E specifying the motor in EPB. Flange Flange for Ø Ø5 DC motors and gr. pump DC motors plastic cover Note: the flange is already included when specifying E the motor in EPB assembly code. Weight:,7 kg 7 Ø B...
Email: sales@hydronit.com Fax B... EPB5 DC motors XM Ø 5 Ø Ø Ø 5 Ø,5 7,5 Compound wound Protection degree: IP Insulation class: F Weight: kg 5,7 Rotation Code W V DC motor with thermal protection & fan, DC/T W V DC motor with thermal protection & fan DC/T Nominal Nominal Nominal duty cycle speed current S: min MCST : 7,5% ED rpm A S: min 5 rpm 7 A MCST : 7,5% ED Spare part code Options Starting switch A or V DC S DC S DC M7ZC (V DC M7ZC (V DC Coupling Coupling for Ø and Ø5 DC motors E Note: the coupling is already included when specifying the motor in EPB. Flange Flange for Ø and Ø5 DC motors E Note: the flange is already included when specifying the motor in EPB. B...
Email: sales@hydronit.com Fax B... EPB5 DC motors with fan cooling 5 N 7 M 5 Series wound Protection degree: IP Insulation class: F 5 Ø Ø5 Ø5 Ø j 5 5 Rotation Weight:,5 kg Front attachment: B Code code Spare part code Nominal Nominal Nominal Mounting duty cycle speed current kit 5W V DC motor thermal protection & fan,5hd DC/T MBCST5 S: min 7 rpm A XB W V DC motor thermal protection & fan HD DC/T MBCST S: min 7 rpm 7 A XB W V DC motor thermal protection & fan HD DC/T MBCST S: min rpm A XB Options Starting switch A or V DC S DC S DC M7ZC ( V DC M7ZC ( V DC Coupling Two pieces coupling for Ø 5 DC motors E E Note: the coupling is already included when specifying the motor in EPB. Flange Flange for Ø 5 DC motors E5 Note: the flange is already included when specifying the motor in EPB. Other B DC motors for heavy duty or special applications They are available with Ø5, Ø5 or Ø in multiple executions, engineered to perform heavy duty cycles and tailor made to suit each specific application, with or without fan cooling or thermal protection. They are mounted on the central manifold with B standard mounting kits (see tables U.. and following. To properly choose these motors, following minimum information must be provided to our technical office: motor power and voltage, application type, duty factors: S [min] continuous running time and [%] percentage of running time on total cycle time, required motor speed, 5 quantity to be supplied. B...
Email: sales@hydronit.com Fax B..5. DC motors choice and electric connection schemes DC motors choice Once required pressure and flow and available voltage ( or V DC are known, you can select the motor checking on each provided diagram if a pump displacement is available at the intersection of pressure and flow values. On the relevant I curve you obtain the absorbed current. When the intersection point is not exactly on a pump curve, choose the closer pump. On the right hand diagram, from the current value, you can easily obtain the maximum allowed S (min and (% values. S gives the allowable motor continuous running time in minutes, gives the allowable running time in % of the total cycle. If obtained S and values are not enough for required duty cycle, choose a bigger motor and repeat the calculation on the new motor curves.,7,,,,,,,,,,,,, 5 5 75 5 5 75 P (bar Electric connection schemes I (A 5 S, 7,7 W V Q (l/min Example: For our application we have following data: flow = l/min, max pressure = bar, not clearly defined duty cycle. We check on, Kw V DC motor diagram and see there is a pump available. We choose from curves, pump: a, cm/rev pump. On the corresponding I curve we read 5 A absorbed current. In these conditions on the S / diagram we read that the DC motor can work for maximum 7 min (S, that is 7% ( of the total cycle, i.e. after 7 min working, the motor should cool down for at least min. The total cycle time is calculated adding the working time and the idle time (7% working time plus % idle time, in this case min. If this duty cycle is not adequate for our application, we must choose a higher power DC motor and check the relevant diagram again. S(min (% White Thermal switch MSV Red Starting switch Red Starting switch Black White Remote control P M Single effect cylinder Black Directional valve Brown Grey (up M Thermal switch Yellow/ Green Black (down Starting switch Remote control P Double effect cylinder M B..5.
Email: sales@hydronit.com Fax B... DC motors diagrams EBCS5 5 W V I (A,,,,, 5 5,,,,, 7,,.5 I ( 5 I (, I (,, 7,,.5 I (A EBCS5 5 W V I ( S S,,,.5 5 5 5, Q (l/min Q (l/min.5 S(min (% P (bar, 5 5 5 5 S(min (% 5 P (bar Test made with battery 5Ah 5% charged at 5 C and mineral oil ISO VG at C,,,, I (,, I,,, (,,, 5, I ( I (,, I (, 7 I (,,, I (, I (, I (A EBCS W V I (A I ( EBCS W V, S,, 5, 5 Q (l/min Q (l/min, S(min 5 (% P (bar,,, 5 5 S, 5 S(min (% P (bar Test made with battery 5Ah 5% charged at 5 C and mineral oil ISO VG at C,, I (,7, 5, I (,,,,7,,,,, I (A,,7, 7, EBCS W V I (A EBCS W V,,, I ( I (, S,,, 5 S,, Q (l/min,, Q (l/min 5,, 5 5 P (bar 5 S(min (%,, 5 5 5 P (bar S(min,5 (% 5 7,5,5 5 Test made with battery 5Ah 5% charged at 5 C and mineral oil ISO VG at C B...
Email: sales@hydronit.com Fax B..7. DC motors diagrams EBCST W V I (A,,,, I (,, I (A,,,,,,7,,,, 7,,, EBCST W V 5,, 5,, S 5 Q (l/min Q (l/min, 5,,, S,,, 5 S(min (% P (bar 5 5 5 P (bar 5 S(min (% 5 Test made with battery 5Ah 5% charged at 5 C and mineral oil ISO VG at C I (A, S 5 Q (l/min Q (l/min S,,,,7 5 5,, 5 I (,,, 5, I (,,,,, 5 7, I (, I (,,7,,, I (, 7,,,, I ( I (,,,, I (A EBCST5 5 W V HD EBCST W V 5 5 S(min P (bar (% 5,, 5 5 5 P (bar S(min 5 5 5 (% 5 5 5,,, I (7,, 7,, I (7,,,, I (A 7,, EBCST W V HD 7,, I (A, EBCST W V HD Test made with battery 5Ah 5% charged at 5 C and mineral oil ISO VG at C, 7,, 5 S 5 Q (l/min,, 5 P (bar 5,7 S(min 5 (% 5 5, 5 5, S Q (l/min,,7 5 5 5 P (bar S(min (% 5 5 5 Test made with battery 5Ah 5% charged at 5 C and mineral oil ISO VG at C B..7.
Email: sales@hydronit.com Fax B... Gr. gear pumps 5 n. Ø 5,5 5,5, Ø 55 Ø N / BSPP,5 5 Alluminium adapter flange for group Code: E55 n. Ø,5 n. M5 Weight:, Kg field E5 ** ** K Size: see spare part code on below table Pump type: K = K type with front/rear ports KL = KL type with lateral ports Nominal displacement: (cc/rev see below table, Ports: = front/rear ports = lateral ports Available range Nominal Peak Intermittent Continuous Max speed N Displacement pressure pressure pressure (rpm (mm (cc/rev (bar (bar (bar Bolts* (mm Spare part code Weight, 5,5 M5x55 E5, Kg 7,5 M5x55 E5,5 Kg 5,5 M5x E5, Kg,,, 5 5,5 M5x5 E, Kg, 55,5 M5x5 E, Kg,5 57, M5x7 E5,5 Kg Other pumps executions with different pressure/speed ratings are available on request. * A proper washer is to be forecast to adapt bolt lenght Main features Oil temperature Inlet pressure Fixing bolts 5 C,7 < P <, bar (absolute pressure x M. class steel tightening torque: 5 Nm Peak pressure: cycle s ON Pressure definition Intermittent pressure: cycle s ON Continuous pressure: cycle always ON Filtration setting 5 5 µ B...
Email: sales@hydronit.com Fax B... Gr. gear pumps 5 N,5 Ø 7 Ø n. Ø, Option: relief valve / BSPP (KL type field E ** ** K Size: see spare part code on below table Pump type: K = K type KL = KL type with lateral ports Nominal displacement: (cc/rev see below table, Ports: = front/rear ports = lateral ports Optional relief valve: (bar see table E.. V** Available range Nominal Peak Intermittent Continuous Max speed N Displacement pressure pressure pressure (rpm (mm (cc/rev (bar (bar (bar Bolts* (mm Spare part code Weight, 5 5 Mx75 5 5 Mx75 E** E**,77 Kg,, 5 5 Mx75 E**5, Kg, 5 5 Mx, Kg, 5 5 Mx E** E**5, 5 5 7 Mx5 E**,7 Kg,7 7 Mx5 E**7, Kg, 7 Mx E**, Kg 7 7 Mx E**,5 Kg Mx E** Kg,,,77 Kg,5 Kg Other pumps executions with different pressure/speed ratings are available on request. * Proper washers are to be forecast to adapt bolt lenght Main features Oil temperature Inlet pressure Fixing bolts 5 C,7 < P <, bar (absolute pressure x M. class steel tightening torque: 5 Nm Peak pressure: cycle s ON Pressure definition Intermittent pressure: cycle s ON Continuous pressure: cycle always ON Filtration setting 5 5 µ B...
Email: sales@hydronit.com Fax B... Accessories VMDC 5,5 max ø 5 ø,7 / UNF A,5 P T Hex. Hex. Hex. Hydraulic symbol P VMDC Direct acting relief valve Nominal size: = l/min B Working range: A = bar B = bar C = 5 bar D = 7 5 bar Main features Adjusting device: = screw (std = handwheel Series T Max pressure 5 bar Max flow l/min Weight,5 kg Recommended tightening torque: Nm Recommended filtration settings: 5 5 µ Oil temperature: C Foot mounting support E5 Weight:, Kg 5 Ø,5 n. ø n. s E5 B...