AVIATION WARNING LIGHT WITH LED PRODUCT CODE : OPT-01 OPT-01 User Manual Page 1
Table of Contents GENERAL SPECIFICATIONS....... 3 1- Supply Voltage... 3 2- Lamp Type... 3 3- Backup System... 3 4- Simultaneous System.... 3 5- Failure Warnings System.... 4 6- Blink System.... 4 7- Continuous System.... 4 8- Operating Temprature... 4 9- Operationg Frequency... 4 10- Cable Specifications... 4 11- Certifacetes... 4 12- Mechanical Specifications... 5 13- Connection Diagram.. 6 TECHINICAL SPECIFICATIONS... 7 PRODUCING FIRM...... 8 Page 2
GENERAL SPECIFICATIONS OPTİMA Warning Lights, are designed and manufactured to warn aircrafts / helicopters for high altitude places. It is designed to use on high towers, monopole masts, high buildings, flagpoles and all warning related areas. OPT-01 System consists of one unit double lamp armature. System operates under the control of photocell relay so automatically turns the system on when ambience gets dark and turns it off when the ambience gets lighten. Upon request in ordering process, system options below are available. 1- Supply Voltage: 12V AC/DC - 24V AC/DC - 48VAC/DC - 110V AC/DC - 220V AC 2- Lamp Type : OPTİMA Led Lamp Optima Led Lamp : OPTİMA Lamps are specially designed and manufactured by OPTİMA ELEKTRONİK. Due to lamps completely made by leds, they have very long working lifes. (100.000 hours). OPTİMA Aviation Warning Lights has 5 years warranty. 3- Backup Systems : System has two lamps on two seperate arms. While one of the lamps is working the other lamp waits as a spare.(figure-1) If active lamp fails, it sends a failure code to the spare one and turn the spare one on after 3 seconds. Figure-1 4- Simultaneous System : Two lamps on two arms works simultaneously.(figure-2) If one of the lamps fails it does not effect the other lamp. Figure-2 Page 3
5- Failure Warning System : With this option, user is able to control the operation of system from a distant place. User installs the system by connecting failure outputs (COM: common NO: normally open NC: normally close) to sounded or lighted warning device. In case of any failure, lamps send warning to failure warning unit inside the control box. By means of Failure Warning System, problem is solved in a short time. 6- Blink System : Lamps blinks 60 times in a minute. 7- Continuous System : On this option system works continuously without blinking. 8- Operating Temprature : -55 C / +55 C 9- Operationg Frequency : 50 Hz 10- Cable Specifications : a- System with Error Alert : 4x1.5mm2 b- System without Error Alert : 2x1.5mm2 *NYY and LIYCY cable types are recommended, the cable types are determined due to customer choice. *Cable lengths must be calculated due to tower length and distance between power supply and control center. 11- Certifacetes: CE Certifacete FUNCTIONALITY TEST OF THE SYSTEM: First tests should be conducted before the system mount on the tower. Test steps; 1-Check the physical conditions of the system. Be sure that system is not damaged. 2-Read the user manual in the package completely. Page 4
12- Mechanical Specifications : ARMATURE: 1-Armature Body : Aluminium Moulding 2-Armature Cover : Aluminium 3-Body Paint : Ral-7032 Elektrostatic Polyester 4-Bolts-Nuts-Washers : Coated 5-Lamp Protective Cover : Red Polycarbonate 6-Protection Class : IP-65 7-Dimensions : 365mmx500mmx110mm (Figure-3) 8-Weight : 2.8 kg Figure-3 Page 5
13- Connection Diagram Figure-4 Figure-5 Figure-6 Page 6
TECHNICAL SPECIFICATIONS OPTİMA AVIATION WARNING LIGHT TECHNICAL PROPERTIES TEKNİK ÖZELLİKLER: LED Number Total Candela Visibility Distance Visibility Angle Energy Spending Operating Time LED Test Alarm Output Maintanence LED Life 140 units Ultra Bright Led 810.000 mcd 10 km in dark and clear environment conditions (Annex14 standard) X Plane=360 (horizontal) Y Plane= 45 (vertical) (Annex14 standard) 6~7 Watt/hour Operates according to the lighting level, does not considers temporary lightning. For double armature; 2nd light operates when the 1st one breaks down Exists (Uninterrupted test at night, Once in 10 minutes at daytime) With dry contact output. Normally Open or Normally Closed No need to maintanence 100.000 hours (operating duration) Operating Temprature -55 C +55 C Light Store Bottom Body Operating Voltage IP Standard Mode of operation Body Paint Bolts-Nuts-Washers Weight Dimensions Fastening Bracket Polycarbonate (red)- Resistant to warming. İcing and ignition Aluminium Casting 12V AC/DC, 24V AC/DC, 48V AC/DC,110V AC, 220V-AC IP65 Lamps blinks 60 times in a minute Ral-7032 Elektrostatik Polyester Coated 2.8 Kg Figure-3 865 Gr Page 7
PRODUCING FIRM As a result of R&D studies, OPTİMA aviation warning light led lamp has been developed by OPTİMA ELECTRONIC COMPANY in 2006. OPTİMA ELEKTRİK ELEKTRONİK VE TELEKOMÜNİKASYON SANAYİ TİCARET LİMİTED ŞİRKETİ OPTİMA ELECTRIC ELECTRONIC AND TELECOMMUNICATION INDUSTRY COMMERCE LIMITED CORPORATION Dudullu Organize Sanayi Bölgesi 3. Cad. Saraçoğlu İş Merkezi No:5/37-38 ÜMRANIYE / İSTANBUL / TURKEY PHONE: +90 216 364 09 20 FAX: +90 216 364 09 21 E-MAIL: info@optimaelektronik.com.tr WEB: www.optimaelektronik.com.tr Custom Designs Special designs can be made in line with customer demand. Please contact with OPTİMA. Page 8