Optional Interlock Panel The most advanced Undersink Sullage System with inbuilt controls and alarms. The Aquatec Sinktec Sullage System is used to handle sink and basin waste in circumstances where gravity discharge is not feasible. System includes: polyethylene undersink chamber, automatic Sinktec pump, inbuilt controller with integral alarm panel, pipework and valves. Advanced Technology Aquatec s Sinktec undersink sullage system is unmatched in quality, reliability and value. Along with this the inbuilt smart controller makes it one of the most advanced technologies available. Used to handle sink and basin waste in circumstances where gravity discharge is not feasible. Applications include > Restaurants > Basements of High-rise Buildings > Boardrooms > Laboratories > Doctor & Dental Surgeries > Construction Sites > Portable Building Facilities Designed and Engineered for > Domestic > Commercial > Industrial Superior Performance > Integral Sinktec controls standard on every model > Moulded from chemical resistant polyethylene > Fitted with Sinktec heavy duty submersible pump > All in tank plumbing included for easy connection on site > Inbuilt vent with carbon odour fi lter eliminates the need to run a separate vent > Inbuilt high level alarm > Float connected to alarm > Remote output for optional output features Optional Features > Interlock panel to shut off water supply to sink and dishwasher if high level alarm activated. > Interlock panel to both, shut off water supply and cut off power supply to dishwasher Benefits of Sinktec > Has inbuilt vent > Effi cient and reliable pump > No onsite wiring is required > No mounting of separate controls as controls are integral > No wiring of optional interlock panels, they simply plug in > Ergonomically designed to suit the most exclusive kitchen
9 Optional Interlock Panel Unique Features 1 Ergonomic, robust polyethylene chamber Integral controls with power light alarm and mute for alarm 3 Inbuilt vent with carbon fi lter to eliminate odours 4 Sinktec automatic submersible pump 5 High level alarm fl oat 6 3mm outlet 7 Removable lid with seal 8 Power lead plugs into power point 9 Remote interlock panel (optional) 10 Inlet 7 1 5 10 6 3 8 4 Model Dimensions Capacity (L) Voltage (V) Max Flow (L/m) Head (max) Sinktec 100 545H x 510W x 400D 57 40 100 5 Sinktec 00 545H x 510W x 400D 57 40 170 7 Note: Dual Pumps, customised and larger fl ow rate systems available on request. Flows and heads of each model may change marginally. Optional Extras > Interlock Panel Dimensions Model Sinktec WSD Separate interlock panel with interlock to shut off water to sink and dishwasher if high level alarm activated. Unit plugs directly into Sinktec. Model Sinktec PD Separate interlock panel with power supply cut off to dishwasher if high level alarm activated. Plugs directly into Sinktec. Model Sinktec WSD/PD Includes both of the above options in a single interlock panel. Unit plugs directly into Sinktec. Aquatec Fluid Systems a division of Aquatec Environmental Group Pty Ltd PO Box 841 Shepparton. VIC 363 Email info@aquatecenviro.com.au Freecall 1300 088 555 aquatecenviro.com.au
A Storage System that will stand the test of time. The Aquatec Storatec Storage System is used for domestic, commercial, industrial and municipal storage of Rainwater, Stormwater, Effl uent, Sewerage and Industrial Waste. Each system includes: fi lament wound fi breglass underground storage vessel, 600mm diameter riser and polyethylene cover. (Concrete slab not included.) Resilient Fibreglass Aquatec s Storatec fi breglass storage vessels are manufactured to stand the test of time. Made from light weight material in fi lament wound Fibreglass Reinforced Polymer (FRP), they are the ideal choice for all storage applications. Applications include > Domestic Dwellings > Rainwater Harvesting > Commercial Buildings > Rest Stops > Town Houses > Car Parks > Factories > Municipal Emergency Storage Structures Designed and Engineered for > Domestic > Commercial > Industrial > Municipal Superior Performance > High Class engineered product > High Quality fi lament wound Fibreglass chamber > Extremely strong and robust > Wide range of pumping systems available for effl uent reuse or rainwater harvesting Optional Features > Light Duty Cover > Heavy Duty Cover > Range of Pumping Systems > Additional manhole access points > Access ladders > Larger sizes available Benefits of Storatec > Light weight easy to install > Extremely durable will outlast other products > Easy to connect to inlet and outlet pipework > Wide range of sizes available > Can be married up with any of Aquatec s Packaged Pumping Systems
Unique Features 3 1 Manufactured from fi lament wound FRP (extremely resilient) Choice of inlet(s) and outlet(s) to suit specifi c site requirements 3 Low profi le polyethylene cover or optional light and heavy duty covers and moulded riser 4 Easy to install (holding down straps supplied with each Storatec System) 5 Optional Pumping systems for reuse available (see Raintec ) 1 4 Model Dimensions / width Length Overall Weight (kg) Capacity (L) Storatec 100 100 3000 00 3000 Storatec 00 1500 3160 350 5000 Storatec 300 1500 4860 500 8000 Storatec 400 1850 400 600 10000 Storatec 500 1850 4900 710 1000 Storatec 600 000 540 870 15000 Storatec 700 000 7010 1400 0000 Storatec 800 000 8650 1600 5000 Storatec 900 500 7150 1800 30000 Storatec 1000 500 9300 00 40000 Storatec 1100 500 1100 600 50000 Storatec 100 3000 9700 3000 60000 Storatec 1300 3000 11000 3100 70000 Storatec 1400 3000 1500 3500 80000 Storatec 1500 3000 13900 3900 90000 Storatec 1600 3000 14800 4300 100000 Optional Extras > Lids Model LDC Light Duty Cover Model HDC Heavy Duty Cover > Riser Extensions Model MR Moulded Riser (340mm) Aquatec Fluid Systems a division of Aquatec Environmental Group Pty Ltd PO Box 841 Shepparton. VIC 363 Email info@aquatecenviro.com.au Freecall 1300 088 555 aquatecenviro.com.au
More than the average sewer system, Sewertec 1 is a high class product which far out performs in endurance and reliability. The Aquatec Sewertec 1 Pump Station is used for domestic and commercial sewerage, septic effl uent, and industrial waste applications. Each package includes: polyethylene chamber with round polyethylene cover, single submersible Sewertec pump, pipework and valving. Sewertec models 400 & 500 include control panels. Unmatched Quality Aquatec s Sewertec 1 single package is unmatched in quality, reliability and value. Along with this the exclusive features such as the domed base and inlet stub connections makes it one of the most advanced technologies available. Used to handle domestic and commercial sewerage, septic effl uent and industrial waste. Applications include > Household Sewer Lift Stations > Restaurants > Commercial Buildings > Industrial Sites > Marinas > Factories Designed and Engineered for > Domestic > Commercial > Industrial Superior Performance > High grade robust polyethylene outlasts concrete based products > Heavy duty submersible Sewertec sewerage pump > Easy connection of pipes with Aquatec s exclusive inlet stubs > Domed base eliminates solids build up > Alarm panels for alarm alert (optional) Optional Features > Light duty cover > Heavy duty cover > Domestic alarm panel > Commercial alarm panel > Model (A) 60L, Model (B) 1100L and Model (C) 1500L tanks available Benefits of Sewertec ¹ > Easy to install > Easy to connect inlet pipes > Robust polyethylene chamber > Can be transported and rolled into place without damage > Quick disconnect pipework > Choice of optional covers > Choice of alarm panels
Unique Features 3 1 Robust, easy to install polyethylene chamber Inlet stub connectors 3 Quick release pipe work 4 Effi cient and reliable Sewertec submersible pump 5 Domed base to withstand adverse ground conditions 6 Optional alarm panel (not shown) 1 4 Shown with Model (B) 1100L tank 5 Model Dimensions Capacity (L) Voltage (V) Max Flow (L/m) Head (max) Outlet Size Sewertec -1-100(A)* 1000 Ø x 1000D 60 40 370 15 50 Sewertec -1-00(A) 1000 Ø x 1000D 60 40 10 18 40 Sewertec -1-300(A) 1000 Ø x 1000D 60 40 00 19 40 Sewertec -1-400(A)** 1000 Ø x 1000D 60 415 0 3 50 Sewertec -1-500(A)** 1000 Ø x 1000D 60 415 80 35 50 Note: All pumps require 10amp single phase power supply (Three phase available in some models) Other pump selections available on application. Please phone 1300 088 555. Flows and heads of each model may change marginally. * Screened Sewerage only ** Includes control panel Optional Extras > Lids Model LDC Light Duty Cover (Round) Model HDC Heavy Duty Cover (Round) > Alarm Panel Model DAP Model CAP Domestic Alarm Panel (Polycarbonate) and high level Float Switch Commercial Alarm Panel (Powder Coated Steel) and high level Float Switch Aquatec Fluid Systems a division of Aquatec Environmental Group Pty Ltd PO Box 841 Shepparton. VIC 363 Email info@aquatecenviro.com.au Freecall 1300 088 555 aquatecenviro.com.au
More than the average sewer system, Sewertec is a high class product which far out performs in endurance and reliability. The Aquatec Sewertec Pump System is used for commercial sewerage, septic effl uent, and industrial waste applications. Each package includes: polyethylene chamber with square aluminium cover, dual sewer pumps, dual pump controller, pipework and valving. Unmatched Quality Aquatec s Sewertec dual package is unmatched in quality, reliability and value. Along with this the exclusive features such as the domed base and inlet stub connections makes it one of the most advanced technologies available. Used to handle commercial sewerage, septic effl uent and industrial waste. Applications include > Town Houses > Club Rooms > Restaurants > Commercial Buildings > Industrial Sites > Marinas > Factories Designed and Engineered for > Commercial > Industrial Superior Performance > Alternating pump controller ensures even wear > High grade robust polyethylene outlasts concrete based products > Superior technology controls to monitor levels and fault conditions > Heavy duty submersible Sewertec pumps > Easy connection of pipes with Aquatec s exclusive inlet stubs Optional Features > Light duty cover > Heavy duty cover > Model (B) 1100L and Model (C) 1500L tanks available Benefits of Sewertec ² > Alternating pump controller > BMS (building management system) optional > Easy to install > Easy to connect inlet pipes > Robust polyethylene chamber > Can be transported and rolled into place without damage > Quick disconnect pipework > Choice of optional covers
4 Unique Features 1 Robust, easy to install polyethylene chamber Inlet stub connectors 3 Effi cient and reliable dual submersible Sewertec pumps 4 Aluminium Lid 5 Dual pump controller for alternating pumps and providing alarm status (not shown) 1 3 Shown with Model (B) 1100L tank Shown with optional guiderail system Model Dimensions Capacity (L) Voltage (V) Max Flow (L/m) Head (max) Outlet Size Sewertec --100(B)* 1000 Ø x 1600D 1100 40 370 15 50 Sewertec --00(B) 1000 Ø x 1600D 1100 40 10 18 40 Sewertec --300(B) 1000 Ø x 1600D 1100 40 00 19 40 Sewertec --400(B) 1000 Ø x 1600D 1100 415 0 3 50 Sewertec --500(B) 1000 Ø x 1600D 1100 415 80 35 50 Note: Model 100, 00 and 300 pumps require 10amp single phase power supply. Model 400 and 500 require three phase power supply Other pump selections available on application. Please phone 1300 088 555. Flow rates shown above are for each pump Flows and heads of each model may change marginally. * Screened Sewerage only Optional Extras > Lids Model LDC Light Duty Cover (600mm x 600mm) Model HDC Heavy Duty Cover (600mm x 600mm) Aquatec Fluid Systems a division of Aquatec Environmental Group Pty Ltd PO Box 841 Shepparton. VIC 363 Email info@aquatecenviro.com.au Freecall 1300 088 555 aquatecenviro.com.au