Usabiaga Group
Business activities Huge range of lifting, transportation (land and sea) and demolition equipment to meet any need anywhere Engineering department with great experience and tools to provide the optimal solution for each case Extensive experience designing, planning and executing highly complex projects
Experience and partners Usabiaga Group is undisputed market leader in Spain, (and probably one of the best in the rest of Europe) that can perform this type of works using the last techniques and equipment based on their experience since 1987 Strategic agreements with competing and complementary partners throughout the world allow us to be efficient almost anywhere. These agreements over the years also allow us the possibility to provide integrated solutions for specific projects The capacity to use this techniques, equipment, partnerships and experience provides more secure projects and it can save time and money in many of them
QUALITY & ENVIROMENTAL assessments are a MUST ISO 9001 ISO 14001
WORKPLACES Experience performing works throughout the world : Spain, Portugal, Andorra, France, Germany, Hungary, Poland, Romania, Ukraine, Morocco, Congo, Algeria, Mauritania, Chili, Business development focused on international projects with major prospects and actual business operations across Europe, Africa and the American continent.
DELEGATIONS With headquarters in the north of Spain (Ordizia), has operational offices in many Spanish cities and Morocco, Mauritania, France, Georgia, Romania and Ecuador.
ACTIVITIES Heavy cranes Hydraulic jacks Girder launchers Demolitions Transports Elevation Special Machines and Equipment
Our equipment Our cranes can provide a solution to any need in the field of elevation, from smaller 5-tns cranes to 800 tons of capacity among fast self propelled cranes. Boom crawler cranes with lattice ranging from a dragline of 50 tons to the giant 1350 tn. To complement and provide an alternative to the cranes, we have a system of girders launchers of 120 m in length and hydraulic gantries able to raise 1400 tons and to telescope up to a height of 11 m.
Our cranes Liebherr 11350 Máximum capacity: 1350 ton Positioning blocks in A Coruña (Spain) the biggest outer harbor of Europe.
Demag CC 4800 Maximum capacity: 800 ton Demag CC4800 assembling in C.T. de Boroa (Spain).
Liebherr LR 1750 Maximum capacity: 750 ton Demolition of the Windsor building in Madrid (Spain).
Liebherr LR 1650 Maximum capacity: 650 ton Positioning blocks in a port
Liebherr LR 1600 Maximum capacity: 600 ton Positioning 220 ton metalic girder for a Highway across a brigde, with a height of 80 meters.
Liebherr LR 1550 Maximum capacity: 550 ton Lifting of the structure of the control tower of Madrid airport (Spain).
Liebherr LG 1550 Maximum capacity: 550 ton Positioning blocks for a outer harbor.
Liebherr LTM 1800 Maximum capacity: 800 ton Assembling the Kursaal, in San Sebastian (Spain).
Liebherr LTM 1500 Maximum capacity: 500 ton Positioning 80 ton hammer, previous to the girder launchers.
Liebherr LR 1400 Maximum capacity: 400 ton Workover on the protection of the New passage in San Sebastian (Spain).
Liebherr LTM 1400 Maximum capacity: 400 ton Positioning 70 ton metalic bridge across a river.
Liebherr LR 1280 Maximum capacity: 280 ton
Grove GTK 1100 Specific crane for windmill assembling
GTK assembling a windwill park on a mountain.
Hydraulic jacks It basically consists of double effect hydraulic cylinders. This equipment offers the possibility to manipulate the hydraulic cylinders together or separately, so as to adapt to any kind of work. These cylinders are assembled each of them on a rigid highly stable supports and they offer the possibility to adjust 4 rolling trolleys with steel wheels, suitable for movement on metal structure roads
Works in Bus Station in Pamplona (Spain).
Works of the disassembly and removal of a 120 ton mill
Superport of Bilbao (Spain) In this case the counterweights of the regular cranes were a problem The frame formed by the Hydaulic Jacks was the solution.
Forjanor (Spain) Supporting 140 ton
Girder launchers The girder launcher system is an equipment designed for the assembly of prefabricated girders on bridges and viaducts. Basically, it is a mobile bridge crane with modular girders of lattice composed of rectangular section elements. These can be attached to form two girders of 120 m length. It includes two lifting trolleys of 100 tons each to transport the load along the two lattice girders. The difference with a conventional crane bridge lies in the launching trolleys of each of their supports. Unlike the moving platforms that only allowlongitudinalmovementsonthegirderrail,theseallowtranslationsofthemain lattice girders in the perpendicular direction to the girder rail. In this way the system girder launcher placed on the stirrup or on a span that has been assembled, can be launched to the next.
Viaduct in Huerces (Spain)
Viaduct in Enciso (Spain)
Viaduct in Ourol (Spain)
Pravia (Spain) In this projet it was impossible to use a crane and the girder launcher was the optimal solution.
Reinosa project (Spain)
Dozon project (Spain)
Demolitions Our demolition equipment - Hydraulic breakers - Vibra Ram hydraulic shears - Hydraulic hammer - Shredder plant - Hidrosphere
Liebherr R 984
Liebherr R 974
Liebherr R 954 V
Liebherr R 944 B
Hydraulic breakers S-24 XLR - Pressure: 280 bares
S-35 - Pressure: 280 bares
FR-50 - Pressure: 310 bares
FR-70 - Pressure: 310 bares
HC-100 - Pressure: 340 bares
FR-100 - Pressure: 340 bares
FR-200 - Pressure: 340 bares
Hydraulic Shears AS-3000 D - Pressure: 320 bares
AS-10000 D - Pressure: 200 bares
AS-7500 D - Pressure: 320 bares
Hydraulic Hammer E-240 - Preassure: 180 bares
Hidrosphere Equipment composed by: - Base crane - Power hydraulic equipment - Hydraulic breaker This hydraulic equipment is a source of hydraulic power, totally independent of the machine or carrier crane, housed in a body whose form, by analogy, might resemble a lemon. This element provides hydraulic power to the breaker, which would be hung from the power hydraulic equipment. The operating electro valves are handled from the ground by radio control.
Shredder plant GMZB-160 G
Some of our demolition works Sants station, Barcelona (Spain)
Windsor building, Madrid (Spain)
Militar Hospital
Benfica Futbol Stadium, Lisboa (Portugal)
Fagor factory
Cement factory in Lemona (Spain)
Viaduct of Bilbao
Hens factory with hidrosphere.
Transports Our Group has always remained attentive to the processes of evolution of the industry in terms of equipment, with the purpose to develop the elements that meet our customers needs, and which meet the needs of service demanded, which has made us leaders throughout the country. We can provide sea and land transport to fulfill our client needs We have the most modern equipment for conducting special transport, with a variety of elements, equipped with the latest technological advances, which, together with the high professionalism of our team, allows us to implement transportation of any kind. The best presentation for our Group
Transports Vehicles and equipment: 2 TITAN tractors with 500 tons dragging capacity 16 MAN tractors with 250 tons dragging capacity Goldhofer modular equipments with a load capacity of up to 1000 Ton 6 axis extensible platforms 4-axis platforms 6-axis, 5-axis, 4-axis, 3 axis extendable gondolas Dollies Tube support plates for 250 ton
TITAN tractors with 1000 tons dragging capacity.
MAN TGA 660 tractor head with four axles GOLDHOFER carrying a 60 tons boom of Liebherr LTM 1800.
MAN TGA 660 tractor head with three lines + girder + four axles module GOLDHOFFER module.
MAN TGA 660 tractor head with GOLDHOFFER module + table + six axles module, carrying the 100 ton body of Liehherr LR 1550.
MAN TGA 660 tractor head with GOLDHOFER module with 4 axes lowered bed carrying a 60 ton PPM A600C.
MAN TGA 660 tractor head with GOLDHOFER module with a 7 axes TRAVESA carrying a 80 ton hammer.
MAN TGA 660 tractor head with GOLDHOFFER module with an intermediate of 5 axles + 5 axles dolly carrying a 220 ton girder.
MAN TGA 660 tractor head with GOLDHOFFER module with 5 axles intermediate gondola transporting a 100 ton block.
MAN TGA 660 tractor head with 5 axles intermediate gondola + 5 axles dolly carrying a 250 ton girder.
Elevation 20 MAN and IVECO trucks with 6x4 and 6x6 traction with PALFINGER booms models 36.002, 44.002, 85.002, 90.002 and 100.002 with a maximum extension of up to 24 meters, allowing the attachment to a JIB, so that the maximum distance becomes 33 meters, in addition to allow the arm to tilt to 45 degrees. The lifting capacities vary between 12 ton at its minimum radius and of 1 ton a distance of 33 meters coupled with the JIB. The main advantage of our boom trucks is the versatility to enter the sites and maneuvering in tight spaces with large variable autonomy in distance and weight to place as well as the possibilities of their articulated booms in order to work at height and suspended.
IVECO truck with PK 36.002 boom working with winch.
MAN truck with the PK 36.002 boom placing netting on site.
IVECO truck with PK 44.002 boom + built in JIB and working with winch.
MAN Truck model PK 44.002 + JIB.
MAN truck with PK 90.002 boom + JIB placing a panel at 33 meters radius.
Special Machines and Equipment Very complex projects for special movements and special machines are made for US
Caterpillar tank It can move 200 ton in extreme situations.
Self- propelled
Hydraulic Jacks by Crawler This machines are used to take the girders from the truck.
600 ton capacity platforms Used to move 150 ton stones inside the harbour of A coruña (Spain)
Bridge Jumper The bridge jumper are used for a lot of things but specially to croos very difficult places with the tractor of the crane over the bridge jumper.
Pilebreakers
Usabiaga Group THANK YOU VERY MUCH FOR YOUR ATTENTION