TA-FUS1ON Fully adjustable Kvs control and balancing valves. That s just two good.
Supported by the Reece hvac-r network. Through our 36 stores around Australia, Reece hvac-r is committed to supporting your business with dedicated stock and knowledgeable experts always on hand. TA Hydronics. Engineering Advantage. With experience across more than 100,000 projects worldwide, TA Hydronics is a leading global provider in hydronic distribution systems and room temperature control. Our innovative, high quality solutions are designed to give you a clear engineering advantage on all types of large scale builds. For more information visit www.reece.com.au/ta_hydronics
Join the Fusion revolution Traditionally, commissioning and maintaining design flow through balancing valves has always been difficult, time consuming work. That s why we developed the revolutionary TA-Fus1on valve. With its innovative design, it makes water balancing easier than ever before. The TA-Fus1on is the first closed circuit valve range in the world to combine control and balancing in a single unit with fully adjustable Kvs. This ensures perfect sizing and maximum performance. Advanced measurement and diagnostic capabilities make the TA-Fus1on much easier to commission. Over and under sizing of flows is a thing of the past, reducing potential problems on every job. By eliminating control valve hunting, your customers enjoy maximum energy savings. Achieve world-class indoor climate conditions from more precise heating and cooling control. Combining the two functions of balancing and control in one valve to save space and installation time. Easy venting and flushing of valve. Get the right valve for the job. TA-FUS1ON-P The FUS1ON-P is pressure independent. With adjustable Kv values, independent control characteristics and constant pressure differential the FUS1ON-P ensures correct valve sizing every time for independent management of different zones or equipment. TA-FUS1ON-C The FUS1ON-C offers adjustable Kv values and independent control characteristics to ensure correct valve sizing. TBV-CMP TBV-CMP is a pressure independent combined control and balancing valve available in sizes 15 to 25mm. TA-MC Actuators A range of compact, easy fit proportional actuators are available for TA-FUS1ON control valves, giving you even greater flexibility.
HOW IT WORKS TA-FUS1ON-C and TA-FUS1ON-P Standard features Achieving the specified Kv value is simpler then ever. Pre-set the valve by adjusting the handwheel to the required design value. Further adjustments can be made during commissioning or with system modifications. Measurements can be taken directly from the test points. Simple to attach actuators providing either on/off, modulating or 3 point control. TA-FUS1ON-P Only - Pressure independent control to ensure optimum system controllability. TA-FUS1ON-C DN 65 to DN 150 TA-FUS1ON-C DN 32 to DN 50 Accurate measurement of flow, differential pressure and temperature Accurate measurement of flow, differential Pressure and temperature Pressure balanced plug to enable use of low force actuators under all system conditions Pressure balanced plug technology In-line technology enabling precision control & low noise generation even at high flows Handwheel equipped with digital read-out TA-FUS1ON-C DN 65 to DN 150 Adjustable KVs thanks to motion translation of cam mechanism. Inherent equal percentage modified (EQM) characteristic independent to the adjustment. No restriction in series TA-FUS1ON-C DN 32 to DN 50 Adjustable KVs thanks to plug shape adaptation. Inherent equal percentage modified (EQM) characteristic independent to the adjustment. No restrictions in series
No other control valve offers the versatility and easy commissioning of the TA-FUS1ON range. Isolation Valve TA-FUS1ON TA-FUS1ON eliminates temperature fluctuations due to coils being starved of flow or oversizing / undersizing of control valves. It also ensures specified flow to equipment with the adjustable Kv value and pressure independent capability. TA-FUS1ON has a unique space saving actuator designed to suit the tight space requirements of modern building design. Plant Room * This drawing is for illustration purposes only In the past, equipment closest to the plantroom could receive too much flow to equipment wasting energy. TA- FUS1ON ensures accurate flow from top to bottom with the adjustable Kv value and pressure independent capabilty. Application Ideal for new builds and refurbishments, specify TA-FUS1ON where water is used to provide the cooling and heating in Air Conditioning systems. Typical applications include large multi-storey buildings, hospitals, facilities providing IT or telecommunication services, apartments, shopping centres, laboratories and entertainment spaces.
TA-FUS1ON-P The TA-FUS1ON-P is pressure independent and accurately controls and balances water flow for equipment such as cooling and heating coils while maintaining a constant pressure differential across your valve or branch line. The Kv value engineered at the design stage can be accurately achieved by setting the valve Kv pre-delivery, on site or during commissioning stage. TA-FUS1ON-P is designed for easy and quick commissioning. Flexible pre-setting with adjustable Kv values. Pressure Independent Control ensures optimum system controllability. Control valve function is maintained by the EQM (Equal Percentage Characteristics) feature, ensuring accurate flows on demand. Adjustable maximum flow and independent EQM characteristics of the valve match the characteristics of the cooling or heating equipment across the stroke of the valve, providing heat transfer proportional to the control signal. Better balancing of water flows. Easy measuring of flow differential, temperature and pressure. 24V AC/DC and 230V AC modulating, on/off or 3-point actuators available. Easy venting and flushing of valve.
page 2 of 3 TA TA FUS1ON-P PRESSURE INDEPENDENT CONTROL VALVES Pressure Independent combined control and balancing valves with independent EQM characteristics Pressure Independent combined control and balancing valves with independent EQM characteristics SELECTION CHART SELECTION CHART Size Size Size Pressure Actuator Pressure Pressure Rating Actuator Actuator Model Rating Rating Model Model Control Control Control Type Type Type Voltage Voltage Voltage Reece Reece Reece TA TA TA Differential Differential Differential Pressure Pressure Pressure Range Range Range Image Image DN32 DN32 DN32 DN40 DN40 DN40 DN50 DN50 DN50 DN65 DN65 DN65 DN80 DN80 DN80 DN100 DN100 DN100 DN125 DN125 DN125 DN150 DN150 DN150 24V AC/DC 1007294 22202-011032 24V 24V AC/DC AC/DC 1007294 1007294 22202-011032 On / Off 230V AC 1007295 22202-021032 230V 230V AC AC 1007295 1007295 22202-021032 Y Mod 24V AC/DC 1007334 22202-031032 Y Y Mod Mod 24V 24V AC/DC AC/DC 1007334 1007334 22202-031032 24V AC/DC 1007297 22202-011040 24V 24V AC/DC AC/DC 1007297 1007297 22202-011040 On / Off 230V AC 1007298 22202-021040 230V 230V AC AC 1007298 1007298 22202-021040 Y Mod 24V AC/DC 1007299 22202-031040 Y Y Mod Mod 24V 24V AC/DC AC/DC 1007299 1007299 22202-031040 24V AC/DC 1007300 22202-011050 24V 24V AC/DC AC/DC 1007300 1007300 22202-011050 On / Off 230V AC 1007301 22202-021050 230V 230V AC AC 1007301 1007301 22202-021050 Y Mod 24V AC/DC 1007302 22202-031050 Y Y Mod Mod 24V 24V AC/DC AC/DC 1007302 1007302 22202-031050 24V AC/DC 1007303 22202-012065 24V 24V AC/DC AC/DC 1007303 1007303 22202-012065 On / Off 230V AC 1007304 22202-022065 230V 230V AC AC 1007304 1007304 22202-022065 Y Mod 24V AC/DC 1007305 22202-032065 Y Y Mod Mod 24V 24V AC/DC AC/DC 1007305 1007305 22202-032065 24V AC/DC 1007315 22202-013065 24V 24V AC/DC AC/DC 1007315 1007315 22202-013065 On / Off 230V AC 1007316 22202-023065 230V 230V AC AC 1007316 1007316 22202-023065 Y Mod 24V AC/DC 1007317 22202-033065 Y Y Mod Mod 24V 24V AC/DC AC/DC 1007317 1007317 22202-033065 24V AC/DC 1007306 22202-012080 24V 24V AC/DC AC/DC 1007306 1007306 22202-012080 On / Off 230V AC 1007307 22202-022080 230V 230V AC AC 1007307 1007307 22202-022080 Y Mod 24V AC/DC 1007308 22202-032080 Y Y Mod Mod 24V 24V AC/DC AC/DC 1007308 1007308 22202-032080 24V AC/DC 1007318 22202-013080 24V 24V AC/DC AC/DC 1007318 1007318 22202-013080 On / Off 230V AC 1007319 22202-023080 230V 230V AC AC 1007319 1007319 22202-023080 Y Mod 24V AC/DC 1007320 22202-033080 Y Y Mod Mod 24V 24V AC/DC AC/DC 1007320 1007320 22202-033080 24V AC/DC 1007309 22202-042100 24V AC/DC 1007309 On / Off 24V AC/DC 1007309 22202-042100 230V AC 1007310 22202-052100 230V 230V AC AC 1007310 1007310 22202-052100 24V AC/DC 1007321 22202-043100 24V AC/DC 1007321 On / Off 24V AC/DC 1007321 22202-043100 & 230V AC 1007322 22202-053100 Mod 230V 230V AC AC 1007322 1007322 22202-053100 24V AC/DC 1007311 22202-042125 24V AC/DC 1007311 On / Off 24V AC/DC 1007311 22202-042125 & 230V AC 1007312 22202-042125 Mod 230V 230V AC AC 1007312 1007312 22202-052125 22202-042125 24V AC/DC 1007323 22202-043125 24V AC/DC 1007323 On / Off 24V AC/DC 1007323 22202-043125 & 230V AC 1007324 22202-053125 Mod 230V 230V AC AC 1007324 1007324 22202-053125 MC160 24V AC/DC 1007313 22202-062150 MC160 24V AC/DC 1007313 MC160 On / Off 24V AC/DC 1007313 22202-062150 & 230V AC 1007314 22202-072150 Mod 230V 230V AC AC 1007314 1007314 22202-072150 MC160 24V AC/DC 1007325 22202-063150 MC160 24V AC/DC 1007325 MC160 On / Off 24V AC/DC 1007325 22202-063150 & 230V AC 1007326 22202-073150 Mod 230V 230V AC AC 1007326 1007326 22202-073150 15-350 kpa 15 15-350 - 350 kpa kpa 25-400 kpa 25 25-400 - 400 kpa kpa 30-400 kpa 30 30-400 - 400 kpa kpa 40-400 kpa 40 40-400 - 400 kpa kpa
TA-FUS1ON-C The TA-FUS1ON-C accurately controls and balances your water flow for equipment such as cooling and heating coils. The Kv value engineered at the design stage can be accurately achieved by setting the valve Kv pre-delivery, on site or during commissioning stage. TA-FUS1ON-C is designed for easy and quick commissioning. Flexible pre-setting with adjustable Kv values. Control valve function is maintained by the EQM (Equal Percentage Characteristics) feature ensuring accurate flows on demand. Independent EQM characteristics control the plug to match the characteristics of the cooling or heating equipment across the stroke of the valve, providing heat transfer proportional to the control signal. Better balancing of water flows. Easy measuring of flows, temperature and differential pressures. Simple to attach actuators providing either modulating on/off or 3-point control. Easy venting and flushing of valve.
TA FUS1ON-C CONTROL VALVES TA FUS1ON-C CONTROL VALVES Combined control and balancing valves with independent EQM characteristics page 1 of 3 page 1 of 3 Combined control and balancing valves with independent EQM characteristics Combined control and balancing valves with independent EQM characteristics SELECTION CHART SELECTION SELECTION CHART Size Pressure CHART Actuator Control Rating Model Type Size Size Pressure Actuator Control Size Rating Pressure Rating Model Actuator Model Type Control Type Rating Model Type Voltage Reece TA Image Voltage Reece Reece TA TA Image Image Voltage Reece TA Image 24V AC/DC 1007261 22106-011032 24V 24V AC/DC AC/DC 1007261 22106-011032 DN32 On Off 230V 24V AC/DC 1007262 1007261 22106-021032 22106-011032 DN32 DN32 230V 230V AC AC 1007262 22106-021032 DN32 Y Mod 24V AC/DC 230V AC 1007263 1007262 22106-031032 22106-021032 Y Y Mod Mod 24V 24V AC/DC AC/DC 1007263 22106-031032 Y Mod 24V 24V AC/DC AC/DC 1007264 1007263 22106-011040 22106-031032 24V 24V AC/DC AC/DC 1007264 22106-011040 On Off 24V AC/DC 1007264 22106-011040 DN40 DN40 DN40 230V 230V AC AC 1007265 22106-021040 230V AC 1007265 22106-021040 DN40 230V AC 1007265 22106-021040 Y Y Y Mod Mod Mod 24V 24V 24V AC/DC AC/DC 1007266 1007266 22106-031040 22106-031040 Y Mod 24V AC/DC 1007266 22106-031040 24V 24V 24V AC/DC AC/DC 1007267 22106-011050 On Off 24V AC/DC 1007267 22106-011050 DN50 DN50 DN50 230V 230V AC AC 1007268 22106-021050 DN50 230V AC 1007268 22106-021050 Y Y Y Mod Mod 24V 24V AC/DC Y Mod Mod 24V 24V AC/DC AC/DC 1007269 1007269 22106-031050 22106-031050 24V 24V 24V AC/DC On Off 24V AC/DC AC/DC 1007270 1007270 22106-012065 230V 230V AC AC 1007271 230V 230V AC AC 1007271 22106-022065 Y Y Mod Mod 24V 24V AC/DC AC/DC 1007272 22106-032065 DN65 DN65 Y Y Mod Mod 24V 24V AC/DC AC/DC 1007272 22106-032065 DN65 DN65 24V 24V AC/DC AC/DC 1007282 22106-013065 On Off 24V 24V AC/DC AC/DC 1007282 22106-013065 230V 230V AC AC 1007283 22106-023065 230V 230V AC AC 1007283 1007283 22106-023065 Y Y Mod Mod 24V 24V AC/DC AC/DC 1007284 22106-033065 Y Mod 24V AC/DC 1007284 22106-033065 Y Mod 24V 24V AC/DC 24V AC/DC AC/DC 1007284 1007273 22106-033065 22106-012080 On Off 24V AC/DC 1007273 22106-012080 24V 230V AC/DC 230V AC 1007273 1007274 22106-012080 22106-022080 230V AC 1007274 22106-022080 Y Y Mod Mod 230V 24V 24V AC/DC AC/DC 1007274 1007275 22106-022080 22106-032080 DN80 DN80 Y Mod 24V AC/DC 1007275 22106-032080 DN80 Y Mod 24V 24V AC/DC AC/DC 1007275 1007285 22106-032080 22106-013080 DN80 On Off 24V AC/DC 1007285 22106-013080 230V 230V AC 1007286 22106-023080 24V AC/DC 230V AC 1007285 1007286 22106-013080 22106-023080 Y Y Mod Mod 24V 24V AC/DC AC/DC 1007287 22106-033080 Y Mod 230V 24V AC/DC 1007286 1007287 22106-023080 22106-033080 24V AC/DC On Off 24V AC/DC 1007276 22106-042100 Y Mod 24V & On Mod Mod / Off 24V AC/DC AC/DC 1007287 1007276 22106-033080 22106-042100 230V 230V AC AC 1007277 22106-052100 DN100 DN100 230V AC 1007277 22106-052100 DN100 24V AC/DC 1007276 22106-042100 24V AC/DC On Off 24V AC/DC 1007288 22106-043100 & On Mod Mod / Off 230V 24V AC AC/DC 1007277 1007288 22106-052100 22106-043100 DN100 230V 230V AC AC 1007289 22106-053100 230V AC 1007289 22106-053100 24V AC/DC 1007288 22106-043100 24V AC/DC On Off 24V AC/DC 1007278 22106-042125 & On Mod Mod / Off 24V AC/DC 1007278 22106-042125 230V 230V AC 230V AC AC 1007289 1007279 22106-053100 22106-052125 DN125 DN125 230V AC 1007279 22106-052125 DN125 24V On Off 24V AC/DC 1007290 22106-043125 24V AC/DC 1007278 22106-042125 & On Mod Mod / Off 24V AC/DC 1007290 22106-043125 230V 230V AC AC 1007279 1007291 22106-052125 22106-053125 DN125 230V AC 1007291 22106-053125 MC160 MC160 On Off 24V AC/DC 1007280 22106-062150 24V AC/DC 1007290 22106-043125 MC160 & On Mod Mod / Off 24V AC/DC 1007280 22106-062150 230V 230V AC 1007281 22106-072150 DN150 DN150 230V AC AC 1007291 1007281 22106-053125 22106-072150 DN150 MC160 24V MC160 On Off 24V AC/DC 1007292 22106-063150 MC160 & On Mod Mod / Off 24V AC/DC 1007292 22106-063150 MC160 24V AC/DC 1007280 22106-062150 230V 230V AC AC 1007293 22106-073150 230V 230V AC AC 1007281 1007293 22106-072150 22106-073150 DN150 MC160 24V AC/DC 1007292 22106-063150 230V AC 1007293 22106-073150
TBV-CMP The TBV-CMP is pressure independent and accurately controls and balances your water flow for equipment such as cooling and heating coils while also maintaining a constant pressure differential across your control valve. The Kv value engineered at the design stage can be accurately achieved by setting the valve Kv on site. With the EQM control valve characteristics you are ensured your equipment receives accurate flows on demand. TBV-CMP is designed for easy and quick commissioning. Flexible pre-setting with adjustable Kv values. Pressure Independent EQM Control ensures optimum system controllability. Correct EQM control characteristic contributes to a linear circuit characteristic for accurate hydronic control. Better balancing of water flows. Easy measuring of flow, temperature and differential pressure. 24V AC (50-60 Hz) modulating control. Easy venting and flushing of valve.
tbv-cmp Pressure independent balancing & control valves Pressure independent balancing & control valves (PIBCV) SELECTION CHART Size Flow Flow Range (l/s) Control Type Reece TA Differential Pressure Range Image DN15 Low Flow 0.005-0.039 Modulating 1020894 52 153-115 Normal Flow 0.021-0.104 Modulating 1020895 52 154-115 DN20 Normal Flow 0.044-0.183 Modulating 1020896 52 154-120 15-350 kpa DN25 Normal Flow 0.093-0.369 Modulating 1020897 52 154-125 TBV-CMP PROPORTIONAL ACTUATORS High performance proportional actuators to suit TBV-CMP SELECTION CHART Size Range Model Number Control Type Cable length Open/ Closed Voltage Reece TA Image EMO TM Modulating 2m NC 24V AC 1020730 1868-01.500 NC 24V AC/DC 1007256 1843-01.500 EMO T On/Off 2m NO 24V AC/DC 1007255 1847-01.500 NC 230V AC 1007258 1833-01.500 DN15-25 NO 230V AC 1007257 1837-01.500 TA-MC15-C Modulating & On/Off 1.5m - 24V AC/DC 1008009 61-015-011
TA-MC ACTUATORS TA-MC ACTUATORS page page 3 of of 3 page 3 of 3 The perfect match for the perfect valve. High High High suitable for control valves. High performance performance performance proportional proportional proportional actuators actuators actuators suitable suitable suitable for for for TA-FUS1ON TA-FUS1ON combination Fully combination adjustable control control Kvs valves. valves. control valves. SELECTION CHART SELECTION CHART SELECTION CHART Size Range Size Size Range Range Size Range Model Model Number Model Number Number Model Number Control Control Type Control Control Type Type Type Voltage Voltage Voltage Voltage Reece Reece Reece Reece TA TA TA TA Image Image Image Image 24V 24V 1007327 1007327 61-055-001 24V 1007327 61-055-001 61-055-001 24V 1007327 61-055-001 On Off DN32 DN32 - DN80 DN80 DN32 - DN80 230V 230V 1007328 1007328 61-055-002 230V 1007328 61-055-002 61-055-002 230V 1007328 61-055-002 DN32 - DN80 Y Y Y Mod Mod Mod 24V 24V 24V 1007329 1007329 1007329 61-055-003 61-055-003 Y Mod 24V 1007329 61-055-003 24V 24V 24V 1007330 1007330 1007330 61-100-001 61-100-001 24V 1007330 61-100-001 DN100 DN100 DN100 - DN125 - DN125 DN125 DN100 - DN125 On / On Off Off On Mod / Off 230V 230V 230V 1007331 61-100-002 1007331 1007331 61-100-002 230V 1007331 61-100-002 24V 24V 24V 1007332 61-160-001 1007332 1007332 61-160-001 24V 1007332 61-160-001 DN150 DN150 DN150 DN150 MC160 MC160 MC160 MC160 On Off On / On Off Mod / Off 230V 230V 1007333 1007333 61-160-002 61-160-002 230V 230V 1007333 1007333 61-160-002
Technical descriptions TA-FUS1ON-P Application: Heating and cooling systems. Functions: Control (EQM) Differential pressure control Pre-setting (max. flow) Measuring ( H, T, q) Shut-off (for isolation during system maintenance) Flushing Dimension: DN 32-150 Pressure class: DN 32-50: PN 16 DN 65-150: PN 16 and PN 25 Differential pressure ( pv): Max. differential pressure: DN 32-50: 350 kpa = 3,5 bar DN 65-150: 400 kpa = 4 bar Min. differential pressure: DN 32-50: 15 kpa = 0,15 bar DN 65-80: 25 kpa = 0,25 bar DN 100-125: 30 kpa = 0,30 bar DN 150: 40 kpa = 0,40 bar (Valid for position 10, fully open. Other positions will require lower differential pressure, check with the software TASelect.) Recommended flow range: The flow (qmax) can be set within the range [m3/h]: DN 32: 0,88-4,21 DN 40: 1,01-6,19 DN 50: 2,71-11,1 DN 65: 9,60-23,3 DN 80: 12,8-36,7 DN 100: 27,8-68,0 DN 125: 45,6-120 DN 150: 78,1-207 qmax = m3/h at each setting and fully open valve plug. Lift: 20 mm Rangeability: >100 (for all recommended settings) Leakage rate: Tight sealing Characteristics: Independent EQM. Temperature: Max. working temperature: 120 C Min. working temperature: -20 C Media: Water or neutral fluids, water-glycol mixtures. (For other media contact TA Hydronics.) Material: DN 32-50: Valve body: AMETAL Valve plug: AMETAL Seat seal: EPDM/Stainless steel Spindle seal: EPDM O-ring O-rings: EPDM Valve insert: AMETAL /PPS/PTFE p insert: Stainless steel/pps Membrane: HNBR Springs: Stainless steel Spindle: Stainless steel DN 65-150: Valve body: Ductile iron EN-GJS-400 O-rings: EPDM Valve plug: Stainless steel Seat seals: EPDM/Stainless steel Plug mechanisms: Stainless steel and brass Membrane: EPDM p spring: Stainless steel. DN 150 painted steel. Screws and nuts: Stainless steel AMETAL is the dezincification resistant alloy of TA. Marking: DN 32-50: TAH, IMI, DN, PN, DR, serial No and flow direction arrow. DN 65-150: TAH, IMI, DN, PN, Kvs, Tmin/max, serial number, valve body material and flow direction arrow, label. CE-marking: DN 65-125: CE DN 150: CE 0062 * *) Notified body. Surface treatment: DN 32-50: Non treated DN 65-150: Electrophoretic painting. Connection: DN 32-50: Female thread according to ISO 228. Thread length according to ISO 7/1. DN 65-150: Flanges according to EN-1092-2, type 21. Face to face length according to EN 558 series 1.
Technical descriptions TA-FUS1ON-C Application: Heating and cooling systems. Functions: Control (EQM) Balancing Pre-setting (Kvs) Measuring ( pv, H, T, q) Shut-off (for isolation during system maintenance) Dimension: DN 32-150 Pressure class: DN 32-50: PN 16 DN 65-150: PN 16 and PN 25 Max. differential pressure ( pv): DN 32-50: 350 kpa = 3,5 bar DN 65-150: 400 kpa = 4 bar Recommended setting range (Kvmax): DN 32: 2,68-12,9 DN 40: 3,03-18,5 DN 50: 8,03-33,0 DN 65: 25,5-65,4 DN 80: 35,9-100 DN 100: 57,4-160 DN 125: 97,4-270 DN 150: 146-400 Kvmax = m³/h at a pressure drop of 1 bar at each setting and fully open valve plug. Lift: 20 mm Rangeability: >100 (for all recommended settings) Leakage rate: Tight sealing Characteristics: Independent EQM. Temperature: Max. working temperature: 120 C Min. working temperature: -20 C Media: Water or neutral fluids, water-glycol mixtures. (For other media contact TA Hydronics.) Material: DN 32-50: Valve body: AMETAL Valve plug: AMETAL Seat seal: EPDM/Stainless steel Spindle seal: EPDM O-ring O-rings: EPDM Valve insert: AMETAL /PPS/PTFE Springs: Stainless steel Spindle: Stainless steel DN 65-150: Valve body: Ductile iron EN-GJS-400 Valve plug: Stainless steel Seat seal: EPDM/Stainless steel O-rings: EPDM Plug mechanism: Stainless steel and brass Screws and nuts: Stainless steel AMETAL is the dezincification resistant alloy of TA Hydronics. Surface treatment: DN 32-50: Non treated DN 65-150: Electrophoretic painting TBV-CMP Application: Heating and cooling systems. Functions: Control Pre-setting (of flow) Differential pressure control Measuring Shut-off Flushing Dimensions: DN 15-25 Pressure class: PN 16 Differential pressure (ΔpV): Max. differential pressure: 350 kpa (Δ Hmax) Min. differential pressure: 15 kpa (Δ Hmin) (Valid for position 10, fully open. Other positions will require lower differential pressure, check with the software TASelect) Flow range: The flow (qmax) can be pre-set within the range: DN 15 LF: 18-142 l/h DN 15 NF: 77-375 l/h DN 20 NF: 160-660 l/h DN 25 NF: 335-1330 l/h Minimum controllable flow: DN 15 LF: 3 l/h DN 15 NF: 7 l/h DN 20 NF: 10 l/h DN 25 NF: 20 l/h Temperature: Max. working temperature: 120ºC Min. working temperature: -20ºC Lift: 4 mm Characteristic: See diagrams under Valve characteristics. Material: Valve body: AMETAL Valve plug: PPS (polyphenylsulphide) Seat seal: EPDM/Stainless steel (DN 15-20). EPDM/AMETAL (DN 25). Spindle seal: EPDM O-ring Valve insert: AMETAL, PPS (polyphenylsulphide) Spring: Stainless steel Spindle: Nedox coated AMETAL Membrane: HNBR AMETAL is the dezincification resistant alloy of TA. Marking: Body: TA, PN 16, DN, inch size and flow direction arrow. Identification ring on measuring point: White = Low flow (LF) Black = Normal flow (NF)
Reece. Works for you. Call 1800 032 566 or visit www.reece.com.au for your nearest Reece branch. Due to limitations in the printing process the colours in this brochure are a guide only. The manufacturer/distributor reserves the right to vary specifications or delete models from their range without prior notification. The manufacturer/distributor takes no responsibility for printing errors. All products enjoy a product replacement warranty. For full warranty details visit www.reece.com.au/product quality V1 [BROCHURE CODE 2130228]