Real-Time Vehicle Tracking System [RKI-1660] User Manual Robokits India info@robokits.co.in http://www.robokitsworld.com Page 1
Robokits India has partnered with Vehicleonmap.com to bring a Real-Time Vehicle Tracking System. Real-Time Vehicle Tracking System is designed and manufactured in India primarily for individual customers and small business. A real-time vehicle tracking system installed in any vehicle (car, bus, truck, motorbike, boat, etc.) allows, owners, managers, logistic teams and finally loved ones to keep track of where their assets are at any time. This product is easy to install in any vehicle and even easier to use and take advantage of its features once up and running. Tracking data is uploaded via GPRS connection to a database server that stores the location, speed, temperature and other vehicle information every 30 to 60 seconds. This information is reported in an extremely user friendly interface at track.vehicleonmap.com. What s in the Box? 1) Vehicle Tracking Device with device ID 2) GPS Antenna 3) Device and user registration information for vehicleonmap.com Vehicle Tracker Device Features GPS based location and GPRS connection based real-time online data-logging and reporting Two digital inputs for door and ignition Two digital outputs to control relay switches 1 analog input for fuel level sensor input 1 analog input for temperature sensor input 12V to 20V compatible battery supply voltage with reverse polarity protection On board memory to store location inputs during the time GPRS is not available or cellular coverage is absent. Optimized GPRS data usage while device is stationary. Improved data point capture rate and thus route accuracy on the fly with device is moving Tracking Website Features 24x7 real-time Vehicle Tracking Historical data route(archive Data) Historical routes, location visits, vehicle speeds, etc. Geo-Fencing Over Speed limit SMS & Email Notifications Cross Browser Compatible Over-the-air location query support (SMS, Email) 24x7 Location Query support http://www.robokitsworld.com Page 2
Pin-out Interface (Right to Left) Battery (-ve) or Ground Battery (+12V to +20V) (+ve) Digital Input for Ignition On/Off Digital Input for Door Open/Closed Output 1 for Relay Output 2 for Relay Input for Temperature Sensor Input for Fuel Gauge Sensor SMA Connector for GPS antenna Figure 1: Pin Numbering LED Status Information GPS Error Led will blink continuously until the GPS satellites are providing valid location data to the device GPRS Led will blink periodically every 30sec to 60sec when the vehicle and location data is being uploaded to the server SIM Card and Cellular Data Requirements A SIM card with an active GPRS data plan will be required for this device to function Please follow the steps in the Appendix to insert sim card in the device Monthly data consumption will be between 200MB to 500MB per month The user alone is liable for any data usage charges amounting from the use of this device There is a yearly website service and maintenance that comes free for the first year Please refer to vehicleonmap.com for further details Supported cellular networks are Vodafone, Tata Docomo, Reliance GSM, Idea and Airtel Usage Steps Insert a SIM Card with active GPRS plan from one of the supported cellular providers Insert the GPS antenna in the SMA connector as per the pin-out figure 1. Pull out the Negative ve and positive +ve wires from your vehicle s battery and connect then correctly to pin 1 and 2 of the device Make sure the device and vehicle is not in parking or under building or structure Wait till the GPS error LED stops blinking Make sure that the GPRS LED is periodically turning on and off Register on vehicleonmap.com and activate your device with the information that you have received with the product Check out the live tracking of your vehicle at track.vehicleonmap.com http://www.robokitsworld.com Page 3
Appendix Opening the module Pull base and box to open Figure 2: Opening Vehicle tracking device Figure 3: Tracking Device is open now http://www.robokitsworld.com Figure 4: Take out GSM module for SIM card insertion Page 4
Inserting the SIM card SIM card slot Push down to insert SIM card Push forward to open slot Figure 5: SIM card insertion http://www.robokitsworld.com Page 5
Connecting the GPS Antenna Figure 6: Connect the GPS antenna to SMA http://www.robokitsworld.com Page 6
Service and Support Service and support for this product are available from Robokits India. The Robokits Web site () maintains current contact information for all Robokits products. Limitations and Warrantees The is intended for personal experimental and amusement use and in no case should be used where the health or safety of persons may depend on its proper operation. Robokits provides no warrantee of suitability or performance for any purpose for the product. Use of the product software and or hardware is with the understanding that any outcome whatsoever is at the users own risk. Robokits sole guarantee is that the software and hardware perform in compliance with this document at the time it was shipped to the best of our ability given reasonable care in manufacture and testing. All products are tested for their best performance before shipping, and no warranty or guarantee is provided on any of them. Of course the support is available on all of them for no cost. Disclaimer Copyright Robokits India, 2012 Neither the whole nor any part of the information contained in, or the product described in this manual, may be adapted or reproduced in any material or electronic form without the prior written consent of the copyright holder. This product and its documentation are supplied on an as-is basis and no warranty as to their suitability for any particular purpose is either made or implied. This document provides preliminary information that may be subject to change without notice. http://www.robokitsworld.com Page 7