FiberGuide Fiber Management Systems. 4th Edition

FiberGuide Fiber Management Systems 4th Edition

Table of Contents Introduction Introduction...1 A Variety of Solutions...2 Innovative Products...3 Features and Benefits... 4 Applications Combining System Parts...5 Downspout Drop Options... 6 Express Exit Drop Options...7 Trumpet Flare Options... 8 4x24-Inch Island T... 9 Raceway Reconfigurations...10 Supporting Overhead Systems... 12 4x12 System Fittings 4" H x 12" W... 50 Downspouts and Attachments 4" H x 12" W...52 Straight Section 4" H x 12" W...54 Snap-Fit Junction 4" H x 12" W...55 Part Drawings...56 4x24 System Fittings 4" H x 24" W... 60 Downspouts 4" H x 24" W...61 Straight Section...62 Snap-Fit Junction...62 Cover Kits...62 Part Drawings...63 Patch Cord Densities Recommended and Maximum Patch Cord Densities...16 Things to Consider When Ordering... 17 2x2 System Fittings 2" H x 2" W...20 Downspouts and Attachments 2" H x 2" W... 21 Straight Section and Junction 2" H x 2" W...22 Part Drawings...23 Express Exit Family For 4x4, 4x6, 4x12, and 4x24 Systems...66 2-Inch Express Exit...67 Part Drawings...68 Vertical Fiber Management Systems 2" and 4" Solid and Slotted Duct Kits and Components...70 2"x 2" Accessories... 72 4"x 4" and 4"x 2" Accessories...73 2x6 System Fittings, Downspouts and Attachments 2" H x 6" W...26 Low-Profile Express Exit...26 Straight Section 2" H x 6" W...28 Junction 2" H x 6" W...28 Part Drawings...29 4x4 System Fittings 4" H x 4" W...32 Downspouts and Attachments 4" H x 4" W...34 Straight Section 4" H x 4" W...36 Snap-Fit Junction 4" H x 4" W...36 Part Drawings...37 4x6 System Fittings 4" H x 6" W...42 Downspouts and Attachments 4" H x 6" W... 44 Straight Section 4" H x 6" W... 46 Snap-Fit Junction 4" H x 6" W... 46 Part Drawings...47 RiserGuide Introduction...76 Specifications...77 Installation and Removal...78 2x2 System Support Kits Direct Support Kits...82 Aluminum Track Support Kit...83 Support Kit Drawings...84 2x6, 4x4, 4x6 System Support Kits Support Kit...86 Support Kit Drawings...87 4x12 System Support Kits Support Kit... 90 Support Kit Drawings...91 4x24 System Support Kits... 94 Support Kit Accessories...96 System Accessories...97 Index...99 www.te.com/adc 1-800-366-3891 x73000 Fax: 1-952-917-3237 4/12 104892AE

FiberGuide Fiber Management Systems Introduction The Industry's Most Comprehensive Optical Raceway System The FiberGuide fiber management systems offer the greatest breadth of optical raceway products in the industry. FiberGuide systems add greater flexibility and drive down installation time to ensure a smooth deployment. FiberGuide is a raceway system designed to protect and route fiber optic patch cords, multi-fiber cable assemblies and intrafacility fiber cable (IFC) to and from fiber splice enclosures, fiber distribution frames and fiber optic terminal devices. FiberGuide ensures a two-inch minimum bend radius is maintained throughout the system. Tool-less, Snap-Fit junctions, cover options significantly reduce the amount of time required for installation. Introduction The FiberGuide system is a complete set of products designed and manufactured to ensure total off-frame protection and ease of use. Basic components include horizontal and vertical straight sections, horizontal and vertical elbows, downspouts, junctions and numerous support hardware and flex-tube kits. Available in a variety of sizes: 2x2 Ideal for smaller installations or for vertical routing of a maximum of four hundred 2 mm fiber optic patch cords. All 2x2 FiberGuide products are shipped with covers. 2x6 Designed for height restricted environments, this robust system provides the same support and system flexibility of the traditional 4-inch-high system while saving 2 inches of overhead space. It features a maximum capacity of 1,200, 2 mm patch cords. 4x4 Features the maximum capacity to support 1,600, 2 mm patch cords. It has been engineered to allow straight sections to be self-supporting over a span of up to 1.83 m (6 feet). 4x6 Features the same benefits of the 4-inch system and a maximum trough capacity of 2,400, 2 mm patch cords. 4x12 The 12-inch-wide trough has a maximum capacity to support nearly 5,000, 2 mm patch cords. Perfect for runs over fiber frame lineups and perimeter routes. 4x24 The 4x24-inch system is the ultimate raceway solution to securely route and protect patch cords over high-density optical distribution frames including ADC's Next Generation Frame (NGF) and Next Generation 3 Frame (NG3 ). Designed for maximum capacity, this robust system provides the same support and flexibility as the traditional 4x12-inch system while doubling capacity. See page 16 for patch cord density tables. 1 www.te.com/adc 1-800-366-3891 x73000 Fax: 1-952-917-3237 4/12 104892AE

FiberGuide Fiber Management Systems Introduction - A Variety of Solutions Examples of FiberGuide Integration Introduction Fiber Raceway Solutions (FGS) Intermediate FDF Solutions (8" FCM) FL1000 Wall Box 6" 6" 6" 6" FL2000 Panel 6" FiberGuide Flex Tubing 6" FiberGuide Express Exit RiserGuide FPL Panel Vertical FiberGuide FMT Panel Traditional ODF Lineup Solutions (8" FCM, LSX) 12" 24" 12" 12" Fiber Optic Transport Lineup Fiber Optic Panel Solutions (FOP) High-Density ODF Lineup Solutions (NGF, NG3 ) Cable Entrance Solutions (FEC) Splice Vault Value-Added Module (VAM) Solutions (Monitors, Splitters, WDM, CWDM) Fiber Cable Assembly & Connector Solutions (FCC) FiberGuide Materials Product Statement The FiberGuide fiber management system is a UL-listed (E151158) general purpose fiber optic raceway system. All FiberGuide products are manufactured from flame-retardant materials. No FiberGuide system parts contain PVC. The table summarizes the fire-resistant properties of FiberGuide straight sections, molded parts and flex tube. FiberGuide Straight Sections (All FiberGuide Systems) FiberGuide Molded Fittings (All FiberGuide Systems) Raw Material Meets UL Requirement Flame rated: UL94V-0 Flame rated: UL94V-0 FiberGuide Flex Tube (2") Flame rated: UL94V-0 UL2024 FiberGuide Flex Tube (1") Flame rated: UL94V-0 UL2024 FiberGuide Flex Tube (7/8") Flame rated: UL94V-2 UL2024 Finished Product Meets UL Requirement UL94V-0 and UL2024 UL94V-0 and UL2024 Note: FiberGuide flex tube complies with the National Electrical Code (NEC) Article 770-51 and Underwriters Laboratory UL2024 requirements for General Purpose Fiber Optic Raceways. 2 www.te.com/adc 1-800-366-3891 x73000 Fax: 1-952-917-3237 4/12 104892AE

FiberGuide Fiber Management Systems Introduction - Innovative Products Snap-Fit and Hinged Cover Options To drive down valuable installation time, FiberGuide systems include tool-less Snap-Fit and hinged cover options. Featuring simple, durable molded hardware, these covers install in minutes and require no tools. The hinged cover option provides easy access, enabling installers and technicians to deploy the product quickly and easily. In addition, the covers do not need to be fully opened for maintenance. Hinged Cover System Introduction Snap-Fit Junction The Snap-Fit Junction is the industry's first and only completely tool-less junction. No additional tools are needed for installation or removal. Quick and easy to install, the FiberGuide Snap-Fit Junction saves valuable time and money. Express Exits The FiberGuide system features a number of innovative Express Exit options: Low profile, 2-inch and 4-inch options round out this innovative product line, designed to meet your most demanding network requirements. By simply securing an Express Exit to the sidewall of a FiberGuide straight section, jumpers can be permanently or temporarily routed to the fiber optic terminal (FOT) equipment or fiber frames. No cutting is required. Positioning a drop with a member of the Express Exit family greatly simplifies installation, protects the integrity of existing fibers and increases the overall flexibility of the raceway system. Express Exit Family Cut-in T Raceway Reconfiguration Solutions Two FiberGuide products to facilitate easy on-site raceway reconfigurations. Available for the 4x4, 4x6, 4x12 and 4x24* systems, the cut-in "T" and the expandable straight section offer the required flexibility to optimize raceway systems in retrofit applications without jeopardizing the integrity of existing cables. *Expandable straight section not available for 4x24 system. 3 www.te.com/adc 1-800-366-3891 x73000 Fax: 1-952-917-3237 4/12 104892AE

FiberGuide Fiber Management Systems Introduction - Features and Benefits Introduction FEATURES & BENEFITS Speed of Installation FiberGuide systems feature a variety of products that allow for quick and easy installation. Express Exit drops as well as tool-less products including Snap-Fit junctions, snap-on covers and new hinged cover options save valuable time for installers. Speed of Deployment The Express Exit system enables new drops to be added or removed quickly and easily. A drop can be added into a fully loaded raceway in seconds without cutting. Raceway Flexibility FiberGuide features 38 support structures, over 75 fittings, multiple drop options and several other components to suit any application you create. Fiber Protection TE Connectivity's expertise translates into maximum protection for your network. Two-inch minimum bend radius is maintained throughout the system regardless of the raceway size. Strength and Durability 100% raceway reliability stands up to any challenge. 4 www.te.com/adc 1-800-366-3891 x73000 Fax: 1-952-917-3237 4/12 104892AE

FiberGuide Fiber Management Systems Applications - Combining System Parts A combination of components from the various sized raceway systems typically comprise overhead FiberGuide systems. Adapters are used to make the transition between sizes. An example of an overhead system that combines many of ADC's FiberGuide systems can be seen below. 4x12 90 Horizontal Elbow 4x12 Horizontal T with single 6" Exit 4x24 Horizontal Cross 4" Express Exit 4x12 to 4x24 Adapter 4x24 Straight Section Introduction 4x12 Straight Section 4x12 Horizontal T Express Exit 4x6 45 Down Elbow 4x12 to Dual 4x6 Adapter 4x6 Straight Section 4x24 Island T with Single 12" Exit 4x24 45 Up Elbow 4x12 45 Down Elbow Trumpet Flare 4x12 Horizontal Cross with two 6" Exits 4x6 45 Up Elbow with Cover Low Profile Express Exit 4x6 90 Down Elbow Trumpet Flare 4x6 45 Horizontal Elbow 4x6 to 4x6 Adapter 4x6 90 Up Elbow with cover 4x6 Horizontal Cross 2x2 to 4x4 Adapter 2x2 90 Extended Horizontal Elbow or 2x2 90 Horizontal Elbow 4x4 Cut in T for 4x24 FiberGuide 4x4 90 Horizontal Elbow 4x6 Straight Section 2x2 Horizontal Straight Section 5 www.te.com/adc 1-800-366-3891 x73000 Fax: 1-952-917-3237 4/12 104892AE

FiberGuide Fiber Management Systems Applications - Downspout Drop Options A downspout drop is recommended over optical distribution frame lineups. The rigid 2-inch drop option and 2-inch flex tube option are two methods for directing fibers out of overhead FiberGuide downspouts and into optical equipment bays. The rigid system is recommended because it offers excellent bend radius control and ensures a quality fiber backbone installation. Applications 4x6 Straight Section FGS-MSHS-B 4x6 Snap-Fit Junction FGS-MFAW-B 2x2 Junction Kit FGS-MJWR-C 4x6 Downspout FGS-MDSP-B 4x6 End Cap Kit FGS-HMEC-B 4x4/4x6 Downspout Insert FGS-HDSI-AB 2x2 45 Down Elbow FGS-MD4A-C* 2x2 45 Up Elbow FGS-MU4A-C* 4x6 Straight Section FGS-MSHS-B 4x6 Downspout FGS-MDSP-B 4x6 Snap-Fit Junction FGS-MFAW-B 4x6 End Cap Kit FGS-HMEC-B 4x6 Downspout Cover FGS-MCDS-AB 4x4 End Cap with one 2" Flex Tube, 5' long FGS-KT03-A1 *Shown without cover 2x2 Vertical Slotted Duct Kit FGS-KTW1-C* 2x2 Vertical Slotted Duct Kit FGS-KTW1-C 2x2 Rigid Drop Option 2" Flex Tube Drop Option 6 www.te.com/adc 1-800-366-3891 x73000 Fax: 1-952-917-3237 4/12 104892AE

FiberGuide Fiber Management Systems Applications - Express Exit Drop Options An Express Exit is recommended over active equipment racks or cabinets. The rigid 2-inch drop option and 2-inch flex tube option are two methods for directing fibers out of overhead FiberGuide downspouts and into optical equipment bays. The rigid system is recommended because it offers excellent bend radius control and ensures a quality fiber backbone installation. Express Exit 2x2 FGS-MEXP-A/B/F* 4x6 Straight Section FGS-MSHS-B Express Exit 2x2 FGS-MEXP-A/B/F* 4x6 Straight Section FGS-MSHS-B 2x2 Junction Kit (4) FGS-MJWR-C 2x2 45 Down Elbow FGS-MD4A-C 2x2 Horizontal Solid Straight Section FGS-MSHA-C* 2" Flex Tube Attachment with 5' of Flex Tube FGS-MEX1-C-5F 2x2 Vertical Slotted Duct Kit FGS-KTW1-C Applications * Shown without Cover 2x2 Vertical Slotted Duct Kit FGS-KTW1-C* * Shown without Cover 2x2 Rigid Drop Option 2" Flex Tube Drop Option 7 www.te.com/adc 1-800-366-3891 x73000 Fax: 1-952-917-3237 4/12 104892AE

FiberGuide Fiber Management Systems Applications - Trumpet Flare Options The trumpet flare is recommended at the bottom of a downspout when directing fibers into a fiber distribution bay. Trumpet flares provide bend radius protection and allow for a large number of fiber patch cords to transition into a fiber bay. A 4x4 trumpet flare is used for the 4x4 and 4x6 downspouts and a 4x6 trumpet flare is used for the 4x12 downspout. Applications 4x12 Snap-Fit Junction (2) FGS-MFAW-F 4x6 Trumpet Flare Kit FGS-MTRM-B 4x12 Horizontal T with single 6" Exit FGS-MHRT-F/B 4x12 Horizontal Straight Section FGS-MSHS-F 4x6 Straight Section FGS-MSHS-B New Threaded Rod Bracket Kit FGS-HNTR-F-5/8 4x6 Downspout FGS-MDSP-B 4x6 Snap-Fit Junction (2) FGS-MFAW-B 4x4 Trumpet Flare Kit FGS-MTRM-A Horizontal T and Trumpet Flare Downspout with Trumpet Flare When attaching a straight section or fitting to the exit of a 4x4 or 4x6 downspout, the FGS-MJWR-A junction must be used. This junction is only required to connect the vertical part, the FGS-MFAW-X junction can be used to connect the horizontal parts. FGS-MFAW-X FGS-MJWR-A Shown Assembled Exploded View 8 www.te.com/adc 1-800-366-3891 x73000 Fax: 1-952-917-3237 4/12 104892AE

FiberGuide Fiber Management Systems Applications - 4x24-Inch Island T The 4x24 Island T with 12-inch exit is designed to be used over the NGF, NG3 or any high-density fiber frame. The 4x24 Island T, a horizontal T with spool and factory-installed trumpet flare, channels fiber directly into the vertical cableways below. Applications 4x24 Island T (Shown with support brackets over an NGF frame.) 9 www.te.com/adc 1-800-366-3891 x73000 Fax: 1-952-917-3237 4/12 104892AE

FiberGuide Fiber Management Systems Applications - Raceway Reconfigurations Cut-in T, Fitting and Fixture The innovative cut-in T fitting and fixture enable on-site raceway modifications without jeopardizing the integrity of installed fibers. Available in 4-, 6-, and 12-inch widths, the cut-in T fitting can be retrofitted to any installed 4-, 6-, 12-, and 24-inch straight section using the cut-in T fixture and the hardware supplied with the fitting. No special tools are required. Applications Fixture attached to sidewall of raceway Fixture protects cables during cutting of sidewall Fitting fills gap left by removed sidewall Supplied hardware secures fitting to raceway and completes installation 10 www.te.com/adc 1-800-366-3891 x73000 Fax: 1-952-917-3237 4/12 104892AE

FiberGuide Fiber Management Systems Applications - Raceway Reconfigurations Expandable Straight Sections The expandable straight section simplifies installation and enhances the overall flexibility of the raceway system. The innovative straight section also provides an access point for future reconfigurations. Available in 4-, 6-, and 12-inch widths, the expandable straight section reduces the installation time necessary to connect opposing runs and provides continuous support for patch cords. Applications Raceway system with gap between opposing runs Expandable straight section extends to connect runs Completed installation 11 www.te.com/adc 1-800-366-3891 x73000 Fax: 1-952-917-3237 4/12 104892AE

FiberGuide Fiber Management Systems Applications - Supporting Overhead Systems A variety of support kits are available for each FiberGuide system. Whenever possible, FiberGuide support kits should be attached to existing hardware (cable racks, digital cableways, existing threaded rods or equipment racks). 2x6, 4x4, 4x6 Systems Applications Auxiliary Framing Support Kit New Threaded Rod Bracket Kit Threaded Rod New Threaded Rod Bracket Kit Unistrut Nut Kit Threaded Rod New Threaded Rod Bracket Kit Ladder Rack Bracket Kit Threaded Rod Auxiliary Framing Support Unistrut Support Ladder Rack Support Center Support Bracket Kit Threaded Rod Top Support C-Bracket Threaded Rod Top of Rack/Cabinet Support Anchor Support 4x12 System Unistrut Nut Kit Threaded Rod Threaded Rod Center Support Bracket Kit Top Support Low Profile C-Bracket Threaded Rod Trapeze Bracket Kit Trapeze Bracket Kit Top of Rack/Cabinet Support Anchor Support 12 www.te.com/adc 1-800-366-3891 x73000 Fax: 1-952-917-3237 4/12 104892AE

FiberGuide Fiber Management Systems Applications - Supporting Overhead Systems 4x12 and 4x24 Systems The straight sections on the 4x12 and 4x24 FiberGuide system are exceptionally strong, making frequent placement of supports beneath them unnecessary. Whenever possible the supports should be placed under the fittings using the mounting bosses as shown (photos 1 and 2). This placement provides the strongest system and requires the least amount of support hardware to be used. Occasionally it is not possible to attach the support bracket to the mounting bosses on the fittings; in those instances the variable fitting support locator can be installed on the bottom of the fitting, allowing the support to be attached anywhere along the fitting bottom (photos 3, 4 and 5). When combining several straight sections, it is recommended that support brackets are installed on both sides of each junction. Applications Typical 4x12 system installation over a Next Generation Frame Line-up 1 2 3 4 5 Variable Fitting Support Locator Note: See pages 54 and 64 for 4x12 and 4x24 system fittings. 13 www.te.com/adc 1-800-366-3891 x73000 Fax: 1-952-917-3237 4/12 104892AE

Patch Cord Densities Recommended and Maximum Patch Cord Densities...16 Things to Consider when Ordering...17-18 Patch Cord Densities 15 www.te.com/adc 1-800-366-3891 x73000 Fax: 1-952-917-3237 4/12 104892AE

Patch Cord Densities Recommended and Maximum Patch Cord Densities Recommended capacity takes into consideration random jumper placement into the FiberGuide system. Maximum density refers to the maximum number of fiber jumpers in a given cross-section of a FiberGuide installation. The TracerLight Connector Identification System features slightly different dimensions than standard patch cords. Recommended/Maximum Density 1.7 mm Patch Cords (per in 2 ) 2.0 mm Patch Cords (per in 2 ) 3.0 mm Patch Cords (per in 2 ) Patch Cord Densities 120/142 90/102 40/44 Trough Pileup Recommended/Maximum Density 2-Inch 3-Inch 4-Inch 4x24 System 1.7 mm 5760/6816 8640/10224 11520/13632 2.0 mm 4320/4869 6480/7344 8640/9792 3.0 mm 1920/2112 2880/3168 3840/4224 4x12 System 1.7 mm 2880/3408 4320/5112 5760/6816 2.0 mm 2160/2448 3240/3672 4320/4896 3.0 mm 960/960 1440/1584 1920/2112 4x6 System 1.7 mm 1440/1704 2160/2556 2880/3408 2.0 mm 1080/1224 1620/1836 2160/2448 3.0 mm 480/528 720/792 960/1056 4x4 System 1.7 mm 960/1136 1440/1704 1920/2272 2.0 mm 720/816 1080/1224 1440/1632 3.0 mm 320/352 480/528 640/704 2x6 System 1.7 mm 1440/1740 2.0 mm 1080/1224 3.0 mm 480/528 2x2 System 1.7 mm 480/568 2.0 mm 360/408 3.0 mm 160/176 TracerLight Patch Cords 65 Patch Cords per in 2 2-Inch 3-Inch 4-Inch 4x24 System 3120 4680 6420 4x12 System 1560 2340 3120 4x6 System 780 1170 1560 4x4 System 520 780 1040 2x6 System 780 2x2 System 260 16 www.te.com/adc 1-800-366-3891 x73000 Fax: 1-952-917-3237 4/12 104892AE

Patch Cord Densities Things to Consider When Ordering For main aisle runs and/or installations above high density fiber frame equipment, consider the 12" and 24" FiberGuide product found on page 49 and 59 respectively. For tributary runs and/or installations above fiber optic terminals (FOTs), consider the 4" and 6" FiberGuide product found on page 31 and 41 respectively. For height restricted environments, consider the 2x6" FiberGuide system found on page 25. Consider the use of variable support locators for the 4x12" and 4x24" FiberGuide systems. The variable support locators provide additional mounting options for support brackets underneath larger fittings such as horizontal T's or elbows. Consider the use of Express Exits rather than the traditional downspouts for bringing fiber out of a straight section run and into a fiber optic terminal (FOT) bay. The Express Exit installs without tools and does not require any cutting for installation. Calculate the maximum potential amount of fiber in a given line-up to determine the proper sized FiberGuide over that line-up. Considerations should be given to pile-up densities (see page 16 for recommended pile-up densities) and redundant routing paths which will have an effect on proper FiberGuide sizing. See pages 65-68 for ordering information on Express Exits and pages 69-73 vertical slotted duct systems. Patch Cord Densities See pages 81-94 for ordering information on system and support kit accessories. Consider the use of the retrofit fin kit for potentially high traffic areas on the 4x4" or 4x6" FiberGuide systems (fins come molded into certain fittings on the 2x6", 4x12" and 4x24" systems). The fin helps to spread the pile-up of jumpers efficiently across the width of a given FiberGuide system especially at horizontal turns and intersections. PART NUMBER QUANTITY 1) Select the Desired FiberGuide Horizontal Components Horizontal Straight Sections (6-feet each) 2x2" System Page 22 2x6" System Page 28 4x4" System Page 36 4x6" System Page 46 4x12" System Page 54 4x24" System Page 62 45, 90 Horizontal Elbows, Straight Adapters and End Caps 2x2" System Page 20 2x6" System Page 26 4x4" System Page 32 4x6" System Page 42 4x12" System Page 50 4x24" System Page 60 17 www.te.com/adc 1-800-366-3891 x73000 Fax: 1-952-917-3237 4/12 104892AE

Patch Cord Densities Things to Consider When Ordering PART NUMBER QUANTITY 2) Select the Desired FiberGuide Vertical Components 45, and 90 Up and Down Elbows 2x2" System Page 20 2x6" System Page 26 4x4" System Page 32 4x6" System Page 42 Patch Cord Densities 4x12" System Page 50 4x24" System Page 60 Downspouts, Trumpet Flares and Attachments 2x2" System Page 21 2x6" System Page 26 4x4" System Page 34 4x6" System Page 44 4x12" System Page 52 4x24" System Page 61 Express Exits and Vertical Slotted Duct Systems Express Exit Family Page 66 Vertical Slotted Duct Systems Page 70 3) Select the Desired FiberGuide Support Kits and Accessories FiberGuide Support Kits 2x2" System Page 82 2x6", 4x4" and 4x6" System Page 86 4x12" System Page 90 4x24" System Page 94 For accessories including attachment hardware and threaded rod, see pages 95-97. 18 www.te.com/adc 1-800-366-3891 x73000 Fax: 1-952-917-3237 4/12 104892AE

2x2 System Fittings... 20 Downspouts and Attachments...21 Straight Section and Junction...22 Part Drawings... 23-24 2x2 System 19 www.te.com/adc 1-800-366-3891 x73000 Fax: 1-952-917-3237 4/12 104892AE

2x2 System Fittings 2" H x 2" W Horizontal T (FGS-MHTA-C) Horizontal Cross (FGS-MHXP-C) 45 Horizontal Elbow (FGS-MH4A-C) 2x2 System 90 Horizontal Elbow (FGS-MH9A-C) 90 Extended Horizontal Elbow (FGS-MH9A-C-45/2) 45 Up Elbow (FGS-MU4A-C) 45 Down Elbow (FGS-MD4A-C) 2x2 to 4x4 Straight Adapter (FGS-MDSA-AC) End Cap (FGS-HMEC-C) ORDERING INFORMATION Description 2x2 fittings Number of Junctions Part Number Yellow System Black System Horizontal T; cover included 3 FGS-MHTA-C FGSB-MHTA-C Horizontal cross; cover and two 2x2 junctions included; two additional 2x2 junctions required (see p. 22) 2+2 FGS-MHXP-C FGSB-MHXP-C 45 horizontal elbow; cover included 2 FGS-MH4A-C FGSB-MH4A-C 90 horizontal elbow; cover included 2 FGS-MH9A-C FGSB-MH9A-C 90 extended horizontal elbow; cover included; similar to two 45 horizontal elbows joined 2 FGS-MH9A-C-45/2 FGSB-MH9A-C-45/2 45 up elbow; cover included 2 FGS-MU4A-C FGSB-MU4A-C 90 up elbow; cover included 2 FGS-MU9A-C FGSB-MU9A-C 45 down elbow; cover included 2 FGS-MD4A-C FGSB-MD4A-C 90 down elbow; cover included 2 FGS-MD9A-C FGSB-MD9A-C 2x2 conversions 2x2 to 4x4 straight adapter; cover included (1) 2x2, (1) 4x4 FGS-MDSA-AC FGSB-MDSA-AC 2x2 end cap End cap; junction included FGS-HMEC-C FGSB-HMEC-C Other nonstandard colors available by request. 20 www.te.com/adc 1-800-366-3891 x73000 Fax: 1-952-917-3237 4/12 104892AE

2x2 System Downspouts and Attachments 2" H x 2" W 2x2 Standard Downspout (FGS-MSDS-C) 2x2 Extended Downspout (FGS-MDSP-C) Extended Downspout (FGS-KDH2-C shown attached to 2x2 FiberGuide system) Dual 7/8" Flex Tube Attachment (FGS-KT03-C) Dual 7/8" Flex Tube Attachment (FGS-KT03-C shown attached to downspout) 2x2 Trumpet Flare (FGS-MTRM-C) 2x2 System ORDERING INFORMATION Description 2x2 downspouts Number of Junctions Part Number Yellow System Black System Standard downspout; cover included 2 FGS-MSDS-C FGSB-MSDS-C Extended downspout; cover included 1 FGS-MDSP-C FGSB-MDSP-C Extended downspout; cover and 2" flex tube, 2' long, included 1 FGS-KDH2-C FGSB-KDH2-C Trumpet flare; 2x2 junction included FGS-MTRM-C FGSB-MTRM-C 2x2 attachments 2x2 flex tube attachment 2" flex tube and a 2x2 junction included 5' length FGS-MEX1-C-5F FGSB-MEX1-C-5F 10' length FGS-MEX1-C-10F FGSB-MEX1-C-10F 15' length FGS-MEX1-C-15F FGSB-MEX1-C-15F Dual 7/8" flex tube attachment two lengths of 7/8" flex tube and a 2x2 junction included (2) 5' length FGS-KT03-C FGSB-KT03-C (2) 10' length FGS-KT03-C-10F FGSB-KT03-C-10F (2) 15' length FGS-KT03-C-15F FGSB-KT03-C-15F Flex tube clamp kit of 10; attaches 7/8" flex tube to rack FGS-HSHC-10 FGS-HSHC-10 Other nonstandard colors available by request. 21 www.te.com/adc 1-800-366-3891 x73000 Fax: 1-952-917-3237 4/12 104892AE

2x2 System Straight Section and Junction 2" H x 2" W Straight Section The 2x2 straight section is a U-shaped trough that provides a protective raceway for optical fibers. Available in 6-foot lengths, the straight section carries fibers horizontally throughout the system. It can also be installed vertically when routing around obstructions. A warning label indicating caution around fiber optic cable is included with each junction kit. Horizontal Straight Section (FGS-MSHA-C) ORDERING INFORMATION Description Part Number 2x2 System 2x2 straight section; horizontal straight section; 6' long, cover included Yellow System FGS-MSHA-C Black System FGSB-MSHA-C Junction The 2x2 junction is used for mechanically joining FiberGuide sections. No tools are required for assembly. ORDERING INFORMATION Junction (FGS-MJWR-C) Description Part Number Yellow System Black System 2x2 junction FGS-MJWR-C FGSB-MJWR-C Other nonstandard colors available by request. 22 www.te.com/adc 1-800-366-3891 x73000 Fax: 1-952-917-3237 4/12 104892AE

2x2 System Part Drawings 203 mm (8") 203 mm (8") 130 mm (5.1") Top 56 mm (2.2") Top 26 mm (10.1") End 53 mm (2.1") 51 mm (2") 51 mm (2") 52 mm (2.1") Front Horizontal T (FGS-MHTA-C) Horizontal Cross (FGS-MHXP-C) 12 mm (4.6") 127 mm (4.99") 127 51 mm (4.99") (2") 2x2 System 51 mm (2") Top 51 mm (2") 5 mm (2") Front 51 mm (2") 45 Horizontal Elbow (FGS-MH4A-C) 90 Horizontal Elbow (FGS-MH9A-C) 171 mm (6.75") 56 mm (2.2") 56 mm (2.22") 117 mm (5") 171 mm (6.75") 9 mm (.34") 53 mm (2.1") 51 mm (2") Top End 53 mm (2.1") 51 mm (2") End Side 90 Extended Horizontal Elbow (FGS-MH9A-C-45/2) 45 Up Elbow (FGS-MU4A-C) 23 www.te.com/adc 1-800-366-3891 x73000 Fax: 1-952-917-3237 4/12 104892AE

2x2 System Part Drawings 51 mm (2") 56 mm (2.2") 167 mm (6.6") Top 84 mm (3.3") 53 mm (2.1") 144 mm (5.7") 102 mm (4") 51 mm (2") End 45 Down Elbow (FGS-MD4A-C) 115 mm (4.5") Side 112 mm (4.4") Front 2x2 to 4x4 Straight Adapter (FGS-MDSA-AC) 2x2 System 329 mm (13") Top 90 mm (3.5") 59 mm (2.3") 127 mm (5") 139 mm (5.4") 53 mm (2.1") 128 mm (5.1") Front 51 mm (2") End Side Standard Downspout (FGS-MSDS-C) Extended Downspout (FGS-KDH2-C) End 51 mm (2") 51 mm (2") 13 mm (0.5") 13 mm (0.5") 13 mm (0.5") 51 mm (2") Side Bottom 102 mm (4") 183 mm (72") 47 mm (1.9") 51 mm (2") 47 mm (1.9") 53 mm (2.1") 51 mm (2") 129 mm (5.1") Horizontal Straight Section (FGS-MSHA-C) 51 mm (2") 47 mm (1.9") 90º Up Elbow (FGS-MU9A-C) 53 mm (2.1") 47 mm (1.9") 51 mm (2") 125 mm (4.9") 90º Down Elbow (FGS-MD9A-C) 24 www.te.com/adc 1-800-366-3891 x73000 Fax: 1-952-917-3237 4/12 104892AE

2x6 System Fittings, Downspouts and Attachments 2" H x 6" W... 26 Low-Profile Express Exit... 26 Straight Section 2" H x 6" W...28 Junction 2" H x 6" W...28 Part Drawings... 29 2x6 System 25 www.te.com/adc 1-800-366-3891 x73000 Fax: 1-952-917-3237 4/12 104892AE

2x6 System Fittings, Downspouts and Attachments 2" H x 6" W ORDERING INFORMATION Description Part Number Number of Junctions Yellow System Black System 2x6 fittings Horizontal T 3 FGS-MHRT-G FGSB-MHRT-G Horizontal cross 4 FGS-MHXP-G FGSB-MHXP-G 90 horizontal elbow 2 FGS-MH9E-G FGSB-MH9E-G 90 down elbow 2 FGS-MD9E-G FGSB-MD9E-G 45 horizontal elbow 2 FGS-MH4E-G FGSB-MH4E-G 45 up elbow, metal cover included 2 FGS-MU4E-G FGSB-MU4E-G 45 down elbow 2 FGS-MD4E-G FGSB-MD4E-G 2x6 conversions 2x6 to 4x4 adapter (1) 2x6, (1) 4x4 FGS-MDSA-GA FGSB-MDSA-GA 2x6 to 4x6 adapter (1) 2x6, (1) 4x6 FGS-MDSA-GB FGSB-MDSA-GB 2x6 System Trumpet flare FGS-MTRM-G FGSB-MTRM-G 2x6 downspouts 2x6 to 2x2 downspout 2 FGS-MDSP-G FGSB-MDSP-G 2x6 attachments Dual 2" flex tube attachment FGS-KT03-G-5F FGSB-KT03-G-5F 2x6 end cap FGS-HMEC-G FGS-HMEC-G Low-Profile Express Exit Designed for low-ceiling or height restricted environments, the Express Exit for the 2x6 FiberGuide system extends only two inches above the straight section sidewall. The Express Exit accommodates up to 150 (3 mm) patch cords, includes removable rear cable guides for additional cable management, and features a 2x2 exit opening. It is designed specifically for the 2x6 FiberGuide system and should not be used on any other FiberGuide system. Express Exit (FGS-MEXP-LP-G) ORDERING INFORMATION Description Part Number Low-Profile Express Exit (designed exclusively for the 2x6 system) Base, cover, mounting hardware, and support bracket included Yellow System FGS-MEXP-LP-G Black System FGSB-MEXP-LP-G 26 www.te.com/adc 1-800-366-3891 x73000 Fax: 1-952-917-3237 4/12 104892AE

2x6 System Fittings, Downspouts and Attachments 2" H x 6" W 2x6 to 2x2 Downspout (FGS-MDSP-G) Horizontal T (FGS-MHRT-G) Horizontal Cross (FGS-MHXP-G) 90 Horizontal Elbow (FGS-MH9E-G) 90 Down Elbow (FGS-MD9E-G) 45 Horizontal Elbow (FGS-MH4E-G) 2x6 System 45 Up Elbow (FGS-MU4E-G) (Metal Cover Included) 45 Down Elbow (FGS-MD4E-G) 2x6 to 4x4 Adapter (FGS-MDSA-GA) 2x6 to 4x6 Adapter (FGS-MDSA-GB) Trumpet Flare (FGS-MTRM-G) 27 www.te.com/adc 1-800-366-3891 x73000 Fax: 1-952-917-3237 4/12 104892AE

2x6 System Straight Section and Junction 2" H x 6" W Straight Section The unique four-channel design of the 2x6 FiberGuide straight section allows the standard system to be attached to the support structure without the need to cut or drill any holes within the trough. This ensures that the patch cords will not come in contact with any screw heads or bolts. ORDERING INFORMATION Description Part Number 2x6 straight section; horizontal straight section; 6' long, cover sold seperately 2x6 accessories 2x6 hinged cover kit for horizontal straight section; three mounting hinges and three clips included Yellow System FGS-MSHS-G FGS-MSNC-B/G Black System FGSB-MSHS-G FGSB-MSNC-B/G 2x6 System 6-inch snap-on cover kit for horizontal straight section; six capture clips with mounting clasps included FGS-MSSC-B/G FGSB-MSSC-B/G Kit-10 black capture clips* FGS-DHCP FGS-DHCP * See drawings on page 30 for more detail on how capture clips and hinges are used. Straight Section (FGS-MSHS-G) Hinged Cover Kit for Horizontal Straight Section (FGS-MSNC-B/G) 6-inch Snap-on Cover (FGS-MSSC-B/G) Junction The one-piece junction employs factory-installed set screws to assure strength and durability. No cutting or drilling of the components is required for assembly. A warning label indicating caution around fiber optic cable is included with each junction kit. ORDERING INFORMATION 2x6 Junction (FGS-JUNC-G) Description Part Number Yellow System Black System 2x6 junction FGS-JUNC-G FGSB-JUNC-G 28 www.te.com/adc 1-800-366-3891 x73000 Fax: 1-952-917-3237 4/12 104892AE

2x6 System Part Drawings 356 mm (14") 343 mm (13.5") 343 mm (13.5") 195 mm (7.7") 343 mm (13.5") 269 mm (10.6") 51 mm (2") 14" (356 mm) 152 mm (6") 45 mm (1.75") 152 mm (6") 45 mm (1.75") 29 mm (1.1") 2x6 to 2x2 Downspout (FGS-MDSP-G) Horizontal T (FGS-MHRT-G) Horizontal Cross (FGS-MHXP-G) 269 mm (10.6") 35.6 mm (1.4") 36 mm (1.4") 269 mm (10.6") 45 mm (1.75") 196 mm (7.7") 152 mm (6") 2x6 System 152 mm (6") 45 mm (1.75") 145 mm (5.7") 36 mm (1.4") 36 mm (1.4") 90º Horizontal Elbow (FGS-MH9E-G) 90º Down Elbow (FGS-MD9E-G) 231 mm (9.1") 226 mm (8.9") 45 36 mm (1.4") 196 mm (7.7") 152 mm (6") 1 44.5 mm (1.75") 44.5 mm (1.75") 196 mm (7.7") 152 mm (6") 45º Horizontal Elbow (FGS-MH4E-G) 45º Up Elbow (FGS-MU4E-G) 29 www.te.com/adc 1-800-366-3891 x73000 Fax: 1-952-917-3237 4/12 104892AE

2x6 System Part Drawings 145 mm (5.7") 57 mm (2.25") 221 mm (8.7") 196 mm (7.7") 196 mm (7.7") 196 mm (7.7") 51 mm (2") 188 mm (7.4") 165 mm (6.5") 262 mm (10.3") 81 mm (3.2") 86 mm (3.4") 56 mm (2.2") 114 mm (4.5") 191 mm (7.5") 76 mm (3") 41 mm (1.6") 71 mm (2.8") 53 mm (2.1") 152 mm (6") 51 mm (2") 2x6 to 4x4 Adapter (FGS-MDSA-GA) 2x6 to 4x6 Adapter (FGS-MDSA-GB) Trumpet Flare (FGS-MTRM-G) 2x6 System 47 mm (1.9") 268 mm (10.6") 131 mm (5.16") 133 mm (5.2") 196 mm (7.7") 152 mm (6") 140 mm (5.5") 99 mm (3.9") Low-Profile Express Exit Downspout (FGS-MEXP-LP-G) 33 mm (1.31") 45º Down Elbow (FGS-MD4E-G) 224 mm (8.8") 71 mm (2.8") 152 mm (6") 70 mm (2.75") 3 mm (.125") 45 mm (1.75") 3 mm (.125") 51 mm (2") 160 mm (6.3") 152 mm (6") 57 mm (2.25") 119 mm (4.7") 127 mm (5") Straight Section (FGS-MSHS-G) Junction (FGS-JUNC-G) 210 mm (8.3") 188 mm (7.4") Side 93 mm (3.7") End 24 mm (1") Side 83 mm (3.25") End 16 mm (6.25") Straight Section (Not Included) Hinged Covers for Straight Section (FGS-MSNC-B/G) Straight Section (Not Included) Snap-on Covers for Horizontal Straight Section (FGS-MSSC-B/G) 30 www.te.com/adc 1-800-366-3891 x73000 Fax: 1-952-917-3237 4/12 104892AE

4x4 System Fittings... 32-33 Downspouts and Attachments...34-35 Straight Section... 36 Snap-Fit Junction... 36 Part Drawings...37-39 4x4 System 31 www.te.com/adc 1-800-366-3891 x73000 Fax: 1-952-917-3237 4/12 104892AE

4x4 System Fittings 4" H x 4" W ORDERING INFORMATION 4x4 System Description 4x4 fittings Number of Junctions Yellow System Yellow System Snap-on Cover Part Number Black System Black System Snap-on Cover Fixed Metal Cover Horizontal T 3 FGS-MHRT-A FGS-SHRT-A FGSB-MHRT-A FGSB-SHRT-A FGS-CHRT-A Horizontal cross 90 horizontal elbow 90 up elbow metal cover included 90 down elbow 45 horizontal elbow 45 up elbow metal cover included 45 down elbow 4x4 conversions 4x4 to 4x6 straight adapter 4x4 expandable straight section 4"Cut-in T; assembly hardware included 6"Cut-in T; assembly hardware included 12"Cut-in T; assembly hardware included Cut-in T fixture 4 FGS-MHXP-A FGS-SHXP-A FGSB-MHXP-A FGSB-SHXP-A FGS-CHXP-A 2 FGS-MH9E-A FGS-SH9E-A FGSB-MH9E-A FGSB-SH9E-A FGS-CH9E-A 2 FGS-MU9E-A FGS-SU9E-A FGSB-MU9E-A FGSB-SU9E-A 2 FGS-MD9E-A FGS-SD9E-A FGSB-MD9E-A FGSB-SD9E-A FGS-CD9E-A 2 FGS-MH4E-A FGS-SH4E-A FGSB-MH4E-A FGSB-SH4E-A FGS-CH4E-A 2 FGS-MU4E-A FGS-SU4E-A FGSB-MU4E-A FGSB-SU4E-A 2 FGS-MD4E-A FGS-SD4E-A FGSB-MD4E-A FGSB-SD4E-A FGS-CD4E-A (1) 4x4, (1) 4x6 FGS-MDSA-AB FGS-SDSA-AB FGSB-MDSA-AB FGSB-SDSA-AB FGS-CDSA-AB 2 FGS-MVAR-A FGSB-MVAR-A FGS-MHIS-A FGSB-MHIS-A FGS-MHIS-B FGSB-MHIS-B FGS-MHIS-F FGSB-MHIS-F FGS-MHIS- JIG-A/B/F FGS-MHIS- JIG-A/B/F 4x4 end cap FGS-HMEC-A FGS-HMEC-A Other nonstandard colors available by request. 32 www.te.com/adc 1-800-366-3891 x73000 Fax: 1-952-917-3237 4/12 104892AE

4x4 System Fittings 4" H x 4" W Horizontal T (FGS-MHRT-A) Horizontal Cross (FGS-MHXP-A) 90 Horizontal Elbow (FGS-MH9E-A) 90 Up Elbow Metal Cover Included (FGS-MU9E-A) 90 Down Elbow (FGS-MD9E-A) 45 Horizontal Elbow (FGS-MH4E-A) 45 Up Elbow Metal Cover Included (FGS-MU4E-A) 45 Down Elbow (FGS-MD4E-A) 4x4 to 4x6 Straight Adapter (FGS-MDSA-AB) 4x4 System Expandable Straight Section (FGS-MVAR-A) Cut-in T (FGS-MHIS-A) Cut-in T Fixture shown on straight section (FGS-MHIS-JIG-A/B/F) End Cap (FGS-HMEC-A) Snap-on Plastic Cover (FGS-SH4E-A shown attached to 45 horizontal elbow with junctions) 33 www.te.com/adc 1-800-366-3891 x73000 Fax: 1-952-917-3237 4/12 104892AE

4x4 System Downspouts and Attachments 4" H x 4" W An array of 4x4 downspout options are available to feed fiber from overhead straight sections into fiber optic equipment below. ORDERING INFORMATION Description Part Number Number of Junctions Yellow System Black System 4x4 downspouts Downspout 2** FGS-MDSP-A FGSB-MDSP-A Cover for 4x4 downspout FGS-MCDS-AB FGSB-MCDS-AB Extended downspout 2* FGS-MDSP-EX-A FGSB-MDSP-EX-A Cover for 4x4 extended downspout FGS-MCDS-EX-AB FGSB-MCDS-EX-AB Insertable downspout FGS-MDSP-A/I FGSB-MDSP-A/I Trumpet flare used on both 4x4 and 4x6 downspouts; no 4" junction kit required FGS-MTRM-A FGSB-MTRM-A Downspout exit junction kit FGS-MJWR-A FGSB-MJWR-A 4x4 System 4x4/4x6 downspout; insert converts bottom of downspout to 2x2" without using 2" to 4" adapter, saving vertical space 4x4 attachments Square to 2" round adapter with flex tube; one 4x4 junction kit (FGS-MJWR-A) required to attach to a downspout drop FGS-HDSI-AB FGS-HDSI-AB 5' length 1 FGS-ASRI-5F FGSB-ASRI-5F 10' length 1 FGS-ASRI-10F FGSB-ASRI-10F 15' length 1 FGS-ASRI-15F FGSB-ASRI-15F Dual 2" flex tube attachment; no 4x4 junction kit required (2) 5' length FGS-KT03-A FGSB-KT03-A (2) 10' length FGS-KT03-A10F FGSB-KT03-A10F (2) 15' length FGS-KT03-A15F FGSB-KT03-A15F Single 2" flex tube attachment; no 4x4 junction kit required 5' length FGS-KT03-A1 FGSB-KT03-A1 10' length FGS-KT03-A1-10F FGSB-KT03-A1-10F 15' length FGS-KT03-A1-15F FGSB-KT03-A1-15F Quad 2" flex tube attachment; no 4x4 junction kit required (4) 5' length FGS-KT03-A4-5F FGSB-KT03-A4-5F (4) 10' length FGS-KT03-A4-10F FGSB-KT03-A4-10F (4) 15' length FGS-KT03-A 4-15F FGSB-KT03-A4-15F 4x4 quad 7/8" flex tube attachment; no 4x4 junction kit required (4) 5' length FGS-KT07-A4-5F FGSB-KT07-A4-5F (4) 10' length FGS-KT07-A4-10F FGSB-KT07-A4-10F (4) 15' length FGS-KT07-A4-15F FGSB-KT07-A4-15F * A third junction is needed if drop is to a fitting or straight section. **This drop junction must be a junction type FGS-MJWR-A, FGSB-MJWR-A. Other nonstandard colors available by request 34 www.te.com/adc 1-800-366-3891 x73000 Fax: 1-952-917-3237 4/12 104892AE

4x4 System Downspouts and Attachments 4" H x 4" W Downspout (FGS-MDSP-A) Cover for 4x4 Downspout (FGS-MCDS-AB) Extended Downspout (FGS-MDSP-EX-A shown with and without cover) Insertable Downspout (FGS-MDSP-A/I) Trumpet Flare (FGS-MTRM-A) Downspout Exit Junction Kit (FGS-MJWR-A) 4x4/4x6 Downspout Insert (FGS-HDSI-AB) 4" Square to 2" Round Adapter with Flex Tube (FGS-ASRI requires FGS-MJWR-A Junction Kit) Dual 2" Flex Tube Attachment (FGS-KT03-A) 4x4 System Single 2" Flex Tube Attachment (FGS-KT03-A1) 2" Quad Flex Tube Attachment (FGS-KT03-A4) 35 www.te.com/adc 1-800-366-3891 x73000 Fax: 1-952-917-3237 4/12 104892AE

4x4 System Straight Section and Snap-Fit Junction 4" H x 4" W Straight Section The unique four-channel design of the 4x4 FiberGuide straight section allows the standard system to be attached to the support structure without the need to cut or drill any holes within the trough. This ensures that the patch cords will not come in contact with any screw heads or bolts, an important consideration in 4x4 systems where higher cable counts apply increased pressure on patch cords at the bottom of the trough. Horizontal Straight Section (FGS-MSHS-A) Expandable Straight Section (FGS-MVAR-A) Hinged Cover for Horizontal Straight Section (FGS-MSNC-A) Snap-On Cover for Horizontal Straight Section (FGS-MSSC-A) ORDERING INFORMATION Description Part Number 4x4 System 4x4 straight section Yellow System Black System Horiz ontal straight section; 6' long, cover sold seperately FGS-MSHS-A FGSB-MSHS-A Expandable straight section FGS-MVAR-A FGSB-MVAR-A 4x4 accessories Hinged cover kit for horizontal straight section; includes three mounting hinges and three clips FGS-MSNC-A FGSB-MSNC-A Snap-on cover kit for horizontal straight section; includes six capture clips with mounting clasps FGS-MSSC-A FGSB-MSSC-A Kit - 10 black capture clips* FGS-DHCP FGS-DHCP Kit - 10 black capture clips and 10 hinges* FGS-DHHC (Yellow Hinge) FGSB-DHHC (Black Hinge) *See drawings on page 40 for more detail on how capture clips and hinges are used Other nonstandard colors available by request. Snap-Fit Junction The Snap-Fit junction assembly is available for the 4-inch FiberGuide system. The Snap-Fit junction is a completely tool-less junction. No additional tools are required for installation or removal. The junction exhibits superior holding force and accommodates support brackets. A warning label indicating caution around fiber optic cable is included with each junction kit. ORDERING INFORMATION Snap-Fit Junction (FGS-MFAW-A) Description Part Number Yellow System Black System 4x4 Snap-Fit junction FGS-MFAW-A FGSB-MFAW-A Other nonstandard colors available by request. 36 www.te.com/adc 1-800-366-3891 x73000 Fax: 1-952-917-3237 4/12 104892AE

4x4 System Part Drawings 330 mm (13") 330 mm (13") 27 mm (9.3") Top 330 mm (13") Top 102 mm (4") 102 mm (4") Front 112 mm (4.4") Front 112 mm (4.4") Horizontal T (FGS-MHRT-A) Horizontal Cross (FGS-MHXP-A) 237 mm (9.3") 120 mm (4.7") 260 mm (10.2") 165 mm (6.5") 237 mm (9.3") Top R 51 mm (2") 102 mm (4") 218 mm (8.6") Side End 260 mm (10.2") End 90 Horizontal Elbow (FGS-MH9E-A) 112 mm (4.4") 218 mm (8.6") 90 Up Elbow (FGS-MU9E-A) Junction Detail (Not Included) 4x4 System 102 mm (4") 208 mm (8.19") Top 223 mm (8.8") End Side 208 mm (8.2") 194 mm (7.7") 102 mm (4") 144 mm (5.7") 112 mm (4.4") End 112 mm (4.4") 90 Down Elbow (FGS-MD9E-A) 45 Horizontal Elbow (FGS-MH4E-A) 37 www.te.com/adc 1-800-366-3891 x73000 Fax: 1-952-917-3237 4/12 104892AE

4x4 System Part Drawings 251 mm (10") 163 mm (6.4") R 51 mm (2") Top Junction Detail (Not Included) 102 mm (4") End 45 Side 203 mm (8") 203 mm (8") 124 mm (5") Side 210 mm (8.3") 166 mm (6.6") 144 mm (5.7") 112 mm (4.4") 163 mm (6.4") 123 mm (4.9") 45 Up Elbow (FGS-MU4E-A) 45 Down Elbow (FGS-MD4E-A) 195 mm (7.7") 186 mm (7.3") Top 144 mm (5.7") 356 mm (14") Retracted Straight Section 102 mm (4") 4x4 System 112 mm (4.4") Front 4x4 to 4x6 Straight Adapter (FGS-MDSA-AB) 345.2 mm (13.6") 254 mm (10") 559 mm (22") Expanded Straight Section Expandable Straight Section (FGS-MVAR-A) 159 mm (6.25") 330 mm (13") 102 mm (4") 329 mm 144 mm (13") (5.7") Front Top 112 mm (4.4") 102 mm (4") 44 mm (1.75") 144 mm (5.7") 160 mm (6.3") 305 mm (12") Cut-in T (FGS-MHIS-A) Downspout (FGS-MDSP-A) 330 mm (13") 329 mm (13") 137 mm (5.4").625" (Not Included) 279 mm (11") 102 mm (4") 211 mm (8.3") 144 mm (5.7") 133 mm (5.25") Side 102 mm (4") 330 mm (13") End Extended Downspout (FGS-MDSP-EX-A) Snap-On Cover Straight for Section 4" Straight Section (FGS-MSSC-A) (Not Included) 38 www.te.com/adc 1-800-366-3891 x73000 Fax: 1-952-917-3237 4/12 104892AE

4x4 System Part Drawings R 51 mm (2") 51 mm (2") Top OPEN CLOSE 76 mm (3") 211 mm (8.3") 103 mm (4") 213 mm (8.4") 159 mm (6.25") End 104 mm (4.1") Trumpet Flare (FGS-MTRM-A) 4x4/4x6 Downspout Insert (FGS-HDSI-AB) 116 mm (4.6") 144 mm (5.7") 102 mm (4") Side 144 mm (5.7") 102 mm (4") End 116 mm (4.55") 117 mm (4.6") 4" Square to 2" Round Adapter with Flex Tube (FGS-ASRI-X*) X Dimension X 1.52 m (5') 3.05 m (10') 3.57 m (15') 183 mm (72") Horizontal Straight Section (FGS-MSHS-A) 4x4 System 159 mm (6.3") 24 mm (1") 173 mm (6.8") 108 mm (4.25") 137 mm (5.4") Side End 102 179 mm mm (4.0") (7") Straight Section (Not Included) Hinged Cover for 4" Horizontal Straight Section (FGS-MSNC-A) 102 mm (4") Snap-Fit Junction (FGS-MFAW-A) 143 mm 140 (5.6") mm (5.51") *Replace X with tube length as follows: 5F=5 feet, 10F=10 feet, 15F=15 feet 39 www.te.com/adc 1-800-366-3891 x73000 Fax: 1-952-917-3237 4/12 104892AE

4x6 System Fittings...42-43 Downspouts and Attachments...44-45 Straight Section...46 Snap-Fit Junction...46 Parts Drawings...47-48 4x6 System 41 www.te.com/adc 1-800-366-3891 x73000 Fax: 1-952-917-3237 4/12 104892AE

4x6 System Fittings 4" H x 6" W ORDERING INFORMATION 4x6 System Description 4x6 fittings Number of Junctions Yellow System Yellow System Snap-on Cover Part Number Black System Black System Snap-on Cover Fixed Metal Cover Horizontal T 3 FGS-MHRT-B FGS-SHRT-B FGSB-MHRT-B FGSB-SHRT-B FGS-CHRT-B Horizontal cross 90 horizontal elbow 90 up elbow metal cover included 90 down elbow 45 horizontal elbow 45 up elbow metal cover included 45 down elbow 4x6 conversions 4x4 to 4x6 straight adapter 4x12 to single 4x6 adapter 4x6 expandable straight section 4" Cut-in T; assembly hardware included 6" Cut-in T; assembly hardware included 12" Cut-in T; assembly hardware included Cut-in T fixture 4 FGS-MHXP-B FGS-SHXP-B FGSB-MHXP-B FGSB-SHXP-B FGS-CHXP-B 2 FGS-MH9E-B FGS-SH9E-B FGSB-MH9E-B FGSB-SH9E-B FGS-CH9E-B 2 FGS-MU9E-B FGSB-MU9E-B FGS-CU9E-B 2 FGS-MD9E-B FGS-SD9E-B FGSB-MD9E-B FGSB-SD9E-B FGS-CD9E-B 2 FGS-MH4E-B FGS-SH4E-B FGSB-MH4E-B FGSB-SH4E-B FGS-CH4E-B 2 FGS-MU4E-B FGS-SU4E-B FGSB-MU4E-B FGSB-SU4E-B FGS-CU4E-B 2 FGS-MD4E-B FGS-SD4E-B FGSB-MD4E-B FGSB-SD4E-B FGS-CD4E-B (1) 4x4, (1) 4x6 FGS-MDSA-AB FGS-SDSA-AB FGSB-MDSA-AB FGSB-SDSA-AB FGS-CDSA-AB FGS-MDSA-FB FGS-SDSA-FB FGSB-MDSA-FB FGSB-SDSA-FB 2 FGS-MVAR-B FGSB-MVAR-B FGS-MHIS-A FGSB-MHIS-A FGS-MHIS-B FGSB-MHIS-B FGS-MHIS-F FGSB-MHIS-F FGS-MHIS- JIG-A/B/F FGS-MHIS- JIG-A/B/F 4x6 end cap FGS-HMEC-B FGS-HMEC-B Other nonstandard colors available by request. 42 www.te.com/adc 1-800-366-3891 x73000 Fax: 1-952-917-3237 4/12 104892AE

4x6 System Fittings 4" H x 6" W Horizontal T (FGS-MHRT-B) Horizontal Cross (FGS-MHXP-B) 90 Horizontal Elbow (FGS-MH9E-B) 90 Up Elbow Cover Included (FGS-MU9E-B) 90 Down Elbow (FGS-MD9E-B) 45 Horizontal Elbow (FGS-MH4E-B) 45 Up Elbow Cover Included (FGS-MU4E-B) 45 Down Elbow (FGS-MD4E-B) 4x4 to 4x6 Straight Adapter (FGS-MDSA-AB) 4x6 System Expandable Straight Section (FGS-MVAR-B) 6" Cut-in T (FGS-MHIS-B) Cut-in T Fixture (FGS-MHIS-JIG-A/B/F shown on a straight section) 4x12 to Single 4x6 Adapter (FGS-MDSA-FB) (Cover: FGS-SDSA-FB) End Cap (FGS-HMEC-B) Snap-on Plastic Cover (FGS-SH4E-B shown attached to 45 horizontal elbow with junctions) 43 www.te.com/adc 1-800-366-3891 x73000 Fax: 1-952-917-3237 4/12 104892AE

4x6 System Downspouts and Attachments 4" H x 6" W 4x6 downspouts and attachments feed fiber from overhead straight sections into fiber optic equipment below. All 4x6 downspouts feature 4-inch exits and attach to the 4-inch x 4-inch attachments listed below. ORDERING INFORMATION Description Part Number Number of Junctions Yellow System Black System 4x6 downspouts Downspout Note: If a trumpet flare is required use a 4x4 flare (FGS-MTRM-A) 2* FGS-MDSP-B FGSB-MDSP-B Cover for 4x6 downspout and dual downspout FGS-MCDS-AB** FGSB-MCDS-AB** Extended downspout 2 FGS-MDSP-EX-B FGSB-MDSP-EX-B Cover for 4x6 extended downspout FGS-MCDS-EX-AB FGSB-MCDS-EX-AB Insertable downspout FGS-MDSP-B/I FGSB-MDSP-B/I Dual drop downspout 2* FGS-MDSP-2B FGSB-MDSP-2B Trumpet flare for dual drop downspout (kit of 2 FGS-MTRM-A) FGS-MTRM-2B FGSB-MTRM-2B Dual drop downspout with divider 2 FGS-MDSP-2B-IMP FGSB-MDSP-2B-IMP Trumpet flare for dual drop downspout with divider (kit of 2) FGS-MTRM-2B-IMP FGSB-MTRM-2B-IMP Downspout with exit junction FGS-MJWR-A FGSB-MJWR-A 4x4/4x6 downspout insert; converts bottom of downspout to 2x2 without using 2" to 4" adapter, saving vertical space FGS-HDSI-AB FGS-HDSI-AB 4x6 System Trumpet flare; used on both 4x4 and 4x6 downspouts no 4" junction kit required 4x6 attachments FGS-MTRM-A 4x4 square to 2" round adapter with flex tube; one 4x4 junction kit (FGS-MJWR-A) required to attach to a downspout drop FGSB-MTRM-A 5' length 1 FGS-ASRI-5F FGSB-ASRI-5F 10' length 1 FGS-ASRI-10F FGSB-ASRI-10F 15' length 1 FGS-ASRI-15F FGSB-ASRI-15F 4x4 dual 2" flex tube attachment; no 4x4 junction kit required (2) 5' length FGS-KT03-A FGSB-KT03-A (2) 10' length FGS-KT03-A10F FGSB-KT03-A10F (2) 15' length FGS-KT03-A15F FGSB-KT03-A15F 4x4 single 2" flex tube attachment; no 4x4 junction kit required 5' length FGS-KT03-A1 FGSB-KT03-A1 10' length FGS-KT03-A1-10F FGSB-KT03-A1-10F 15' length FGS-KT03-A1-15F FGSB-KT03-A1-15F 4x4 quad 2" flex tube attachment; no 4x4 junction kit required (4) 5' length FGS-KT03-A4-5F FGSB-KT03-A4-5F (4) 10' length FGS-KT03-A4-10F FGSB-KT03-A4-10F (4) 15' length FGS-KT03-A4-15F FGSB-KT03-A4-15F 4x4 quad 7/8" flex tube attachment; no 4x4 junction kit required (4) 5' length FGS-KT07-A4-5F FGSB-KT07-A4-5F (4) 10' length FGS-KT07-A4-10F FGSB-KT07-A4-10F (4) 15' length FGS-KT07-A4-15F FGSB-KT07-A4-15F *A 4x4 junction is needed to drop to a fitting or a straight section. This drop junction must be a junction type FGS-MJWR-A or FGSB-MJWR-A. **Dual downspout requires two covers. Other nonstandard colors available by request. 44 www.te.com/adc 1-800-366-3891 x73000 Fax: 1-952-917-3237 4/12 104892AE

4x6 System Downspouts and Attachments 4" H x 6" W Downspout (FGS-MDSP-B) Cover for 4x6 Downspout (FGS-MCDS-AB) Extended Downspout (FGS-MDSP-EX-B shown with and without cover) Insertable Downspout (FGS-MDSP-B/I) Dual Downspout (FGS-MDSP-2B) Dual Downspout with Divider (FGS-MDSP-2B-IMP) Trumpet Flare Kit for 4x6 Dual Downspout (FGS-MTRM-2B) Trumpet Flare Kit for Dual Downspout with Divider (FGS-MTRM-2B-IMP) Single 2" Flex Tube Attachment (FGS-KT03-A1) 4x6 System Trumpet Flare Kit (FGS-MTRM-A) 4x4/4x6 Downspout Insert (FGS-HDSI-AB) Downspout Exit Junction Kit (FGS-MJWR-A) 4" Square to 2" Round Adapter with Flex Tube (FGS-ASRI requires FGS-MJWR-A junction kit) Dual 2" Flex Tube Attachment (FGS-KT03-A) 2" Quad Flex Flex Tube Attachment (FGS-KT03-A4) 45 www.te.com/adc 1-800-366-3891 x73000 Fax: 1-952-917-3237 4/12 104892AE

4x6 System Straight Section and Snap-Fit Junction 4" H x 6" W Straight Section The unique four-channel design of the 4x6 FiberGuide straight section allows the standard system to be attached to the support structure without the need to cut or drill any holes within the trough. This ensures that the patch cords will not come in contact with any screw heads or bolts, an important consideration in 4x6 systems where higher cable counts apply increased pressure on patch cords at the bottom of the trough. Horizontal Straight Section (FGS-MSHS-B) Expandable Straight Section (FGS-MVAR-B) Hinged Cover Kit for Horizontal Straight Section (FGS-MSNC-B/G) 6" Snap-on Cover for Horizontal Straight Section (FGS-MSSC-B/G) ORDERING INFORMATION Description Part Number Yellow System Black System 4x6 straight sections Horizontal straight section; 6' long, cover sold seperately FGS-MSHS-B FGSB-MSHS-B Expandable straight section FGS-MVAR-B FGSB-MVAR-B Slack storage straight section FGS-MSHS-STOR-B FGSB-MSHS-STOR-B 4x6 System 4x6 accessories Hinged cover kit for horizontal straight section; includes three mounting hinges and three clips 6" snap-on cover kit for horizontal straight section; includes six capture clips with mounting clasps FGS-MSNC-B/G FGS-MSSC-B/G FGSB-MSNC-B/G FGSB-MSSC-B/G Kit - 10 black capture clips* FGS-DHCP FGS-DHCP Kit - 10 black capture clips and 10 hinges* FGS-DHHC (Yellow Hinge) FGSB-DHHC (Black Hinge) *See drawings on page 50 for more detail on how capture clips and hinges are used. Other nonstandard colors available by request. Snap-Fit Junction The Snap-Fit junction assembly is available for the 6-inch FiberGuide system. The new junction is a completely tool-less junction. No additional tools are required for installation or removal. The Snap-Fit Junction exhibits superior holding force and accommodates support brackets. A warning label indicating caution around fiber optic cable is included with each junction kit. ORDERING INFORMATION Snap-Fit Junction (FGS-MFAW-B) Description Part Number Yellow System Black System 4x6 Snap-fit junction FGS-MFAW-B FGSB-MFAW-B Other nonstandard colors available by request. 46 www.te.com/adc 1-800-366-3891 x73000 Fax: 1-952-917-3237 4/12 104892AE

4x6 System Part Drawings 381 mm (15") 381 mm (15") 288 mm (11.3") 288 mm (11.3") Top 381 mm (15") Top 288 mm (11.3") Top 152 mm (6") Front 112 mm (4.4") Front 152 mm (6") 112 mm (4.4") 152 mm (6") End 112 mm (4.4") Horizontal T (FGS-MHRT-B) Horizontal Cross (FGS-MHXP-B) 90 Horizontal Elbow (FGS-MH9E-B) 152 mm (6") Top 245 mm (9.7") 259 mm (10.2") 112 mm (4.4") 218 mm (8.6") 114 mm (4.5") 108 mm (4.25") 86 mm (3.4") 108 mm (4.25") 196 mm (7.7") 183 mm (7.2") 13 mm (.5") End 45 Horizontal Elbow (FGS-MH4E-B) 90º Up Elbow (FGS-MU9E-B) 152 mm (6") Top 245 mm (9.7") 259 mm (10.2") 112 mm (4.4") 213 mm (8.4") 203 mm (8") R 5.1 mm (2") 251 mm (10") Top Side Junction Detail (Not Included) 166 mm (6.6") 4x6 System End 90 Down Elbow (FGS-MD9E-B) 124 mm (4.9") 210 mm (8.3") 45 Up Elbow (FGS-MU4E-B) 152 mm (6") 45 203 mm (8") End Side 123 mm (4.9") 195 mm (7.7") 112 mm (4.4") 45 Down Elbow (FGS-MD4E-B) 163 mm (6.4") 47 www.te.com/adc 1-800-366-3891 x73000 Fax: 1-952-917-3237 4/12 104892AE

4x6 System Part Drawings 396 mm (15.6") 305 mm (12") 356 mm (14") Retracted Straight Section 159 mm (6.25") 381 mm (15") R 51 mm (2") 51 mm (2") Top 263 mm (10.4") OPEN CLOSE 76 mm (3") 559 mm (22") Expanded Straight Section 152 mm (6") 356 mm (14") 159 mm (6.25") End Expandable Straight Section (FGS-MVAR-B) 6" Cut-in T (FGS-MHIS-B) Trumpet Flare (FGS-MTRM-B) 329 mm (13") Front 112 mm (4.4") 329 mm (13") Top 102 mm (4") 195 mm (7.7") 44 mm (1.75") 144 mm (5.7") 160 mm (6.3") 211 mm (8.3") 144 mm (5.7") 102 mm (4") 330 mm (13") Downspout (FGS-MDSP-B) Extended Downspout (FGS-MDSP-EX-B) 4x6 System Side 116 mm (4.6") 195 mm (7.7") 152 mm (6") 102 mm (4") End 133 mm (5.25") Side 188 mm (7.4") End 16 mm (.625") 183 mm (72") Straight Section (Not Included) Horizontal Straight Section (FGS-MSHS-B) 6" Snap-On Cover for Straight Section (FGS-MSSC-B/G) 138 mm (5.4") Side 210 mm (8.3") End 24 mm (1") 224 mm (8.8") 230 mm 152 (9") mm (6.0") 108 mm (4.25") 140 mm 143 (5.51") mm (5.6") 305 mm (12") 89 mm (3.5") diameter 32 mm (1.25") Straight Section (Not Included) Hinged Cover for Straight Section (FGS-MSNC-B/G) 152 mm (6") Snap-Fit Junction Assembly (FGS-MFAW-B) Slack Storage Straight Section (FGS-MSHS-STOR-B) 48 www.te.com/adc 1-800-366-3891 x73000 Fax: 1-952-917-3237 4/12 104892AE

4x12 System Fittings...50-51 Downspouts and Attachments... 52-53 Straight Section... 54 Snap-Fit Junction...55 Part Drawings...56-58 4x12 System 49 www.te.com/adc 1-800-366-3891 x73000 Fax: 1-952-917-3237 4/12 104892AE

4x12 System Fittings 4" H x 12" W ORDERING INFORMATION 4x12 System Description 4x12 fittings Number of Junctions Yellow System Yellow System Snap-on Cover Part Number Black System Black System Snap-on Cover Horizontal T 3 FGS-MHRT-F FGS-SHRT-F FGSB-MHRT-F FGSB-SHRT-F Horizontal cross 4 FGS-MHXP-F FGS-SHXP-F FGSB-MHXP-F FGSB-SHXP-F 90 horizontal elbow 2 FGS-MH9E-F FGS-SH9E-F FGSB-MH9E-F FGSB-SH9E-F 90 down elbow 2 FGS-MD9E-F FGS-SD9E-F FGSB-MD9E-F FGSB-SD9E-F 45 horizontal elbow 2 FGS-MH4E-F FGS-SH4E-F FGSB-MH4E-F FGSB-SH4E-F 45 up elbow 2 FGS-MU4E-F FGS-SU4E-F FGSB-MU4E-F FGSB-SU4E-F 45 down elbow 2 FGS-MD4E-F FGS-SD4E-F FGSB-MD4E-F FGSB-SD4E-F Horizontal T with single 6" exit Horizontal cross with two 6" exits 4x12 conversions 4x12 to dual 4x6 adapter 4x12 to single 4x6 adapter 4x12 to 4x6 right adapter; includes fastening hardware Fixed metal cover for right adapter 4x12 to 4x6 left adapter; includes fastening hardware Fixed metal cover for left adapter (2) 4x12, (1) 4x6 (2) 4x12, (2) 4x6 (1) 4x12, (2) 4x6 (1) 4x12, (1) 4x6 FGS-MHRT-F/B FGS-SHRT-F/B FGSB-MHRT-F/B FGSB-SHRT-F/B FGS-MHXP-B/F FGS-SHXP-B/F FGSB-MHXP-B/F FGSB-SHXP-B/F FGS-MDSA-F2B FGS-SDSA-F2B FGSB-MDSA-F2B FGSB-SDSA-F2B FGS-MDSA-FB FGS-SDSA-FB FGSB-MDSA-FB FGSB-SDSA-FB FGS-MDSA-FB-R FGS-VDSA-FB-R FGS-MDSA-FB-L FGS-VDSA-FB-L FGS-MDSA-FB-R FGS-VDSA-FB-R FGS-MDSA-FB-L FGS-VDSA-FB-L Expandable straight section 2 FGS-MVAR-F FGSB-MVAR-F 4" Cut-in T; assembly hardware included 6" Cut-in T; assembly hardware included 12" Cut-in T; assembly hardware included Cut-in T fixture FGS-MHIS-A FGSB-MHIS-A FGS-MHIS-B FGSB-MHIS-B FGS-MHIS-F FGSB-MHIS-F FGS-MHIS- JIG-A/B/F FGS-MHIS- JIG-A/B/F 4x12 end cap FGS-HMEC-F FGS-HMEC-F 4x12 variable support locator kits for; Each kit contains all necessary mounting hardware. Fitting sold separately. FGS-MDSP-F (downspout) FGS-MDSP-F-VS FGS-MDSP-F-VS FGS-MHRT-F (horizontal T) FGS-MHRT-F-VS FGS-MHRT-F-VS FGS-MHXP-F (horizontal cross) FGS-MHXP-F-VS FGS-MHXP-F-VS FGS-MH9E-F (90 horizontal elbow) FGS-MH9E-F-VS FGS-MH9E-F-VS FGS-MHRT-F/B (horizontal T 6"/12") FGS-MHXP-B/F (horizontal cross 6"/12") FGS-MHRT- F/B-VS FGS-MHXP- B/F-VS FGS-MHRT-F/B-VS FGS-MHXP- B/F-VS Other nonstandard colors available by request. 50 www.te.com/adc 1-800-366-3891 x73000 Fax: 1-952-917-3237 4/12 104892AE

4x12 System Fittings 4" H x 12" W Horizontal T (FGS-MHRT-F) Horizontal Cross (FGS-MHXP-F) 90 Horizontal Elbow (FGS-MH9E-F) 90 Down Elbow (FGS-MD9E-F) 45 Horizontal Elbow (FGS-MH4E-F) 45 Up Elbow (FGS-MU4E-F) 45 Down Elbow (FGS-MD4E-F) Horizontal T with Single 6" Exit (FGS-MHRT-F/B) Horizontal Cross with Two 6" Exits (FGS-MHXP-B/F) 4x12 to Dual 4x6 Adapter (FGS-MDSA-F2B) 4x12 to Single 4x6 Adapter (FGS-MDSA-FB) 4x12 to 4x6 Adapter Right (FGS-MDSA-FB-R) 4x12 System 4x12 to 4x6 Adapter Left (FGS-MDSA-FB-L) End Cap (FGS-HMEC-F) Expandable Straight Section (FGS-MVAR-F) 12" Cut-in T (FGS-MHIS-F) Cut-in T Fixture (FGS-MHIS-JIG-A/B/F shown on a straight section) Snap-on Cover (FGS-SH4E-F shown separate) Snap-on Cover Installation Snap-on Cover (FGS-SH4E-F shown installed) 51 www.te.com/adc 1-800-366-3891 x73000 Fax: 1-952-917-3237 4/12 104892AE

4x12 System Downspouts and Attachments 4" H x 12" W An array of 4x12 downspouts and attachments are available to feed fiber from overhead straight sections into fiber optic equipment below. The 4x12 downspout features a 4x6 exit and accepts the 4x6 exit attachments listed below. ORDERING INFORMATION Description Part Number Number of Junctions Yellow System Black System 4x12 downspouts Downspout 2* FGS-MDSP-F FGSB-MDSP-F Cover for 4x12 downspout FGS-SDSP-F FGSB-SDSP-F Insertable downspout FGS-MDSP-F/I FGSB-MDSP-F/I Trumpet flare FGS-MTRM-F FGSB-MTRM-F Downspout with rear T 3* FGS-MDRT-F FGSB-MDRT-F Island T with spool and factory installed trumpet flare; designed for use over ADC Next Generation Frame Storage Bay Island T with trumpet and dividing spool; designed for use over ADC 600 mm wide Next Generation Frame Variable Support Locator Kit included 2 FGS-ISLAND-F FGSB-ISLAND-F 2 FGS-ISLAND-F-513 FGSB-ISLAND-F-513 Island T with recessed dividing spool 3 FGS-ISLAND3-F FGSB-ISLAND3-F 4x12 attachments 4x6 dual 2" flex tube attachment 5' length FGS-KT03-B FGSB-KT03-B 10' length FGS-KT03-B-10F FGSB-KT03-B-10F 4x12 System 15' length FGS-KT03-B-15F FGSB-KT03-B-15F 4x6 trumpet flare kit; used on 4x12 downspouts 4x12 to 4x4 downspout converter; converts downspout opening to accept 4x4 slotted duct FGS-MTRM-B FGSB-MTRM-B FGS-HDSI-F/D FGS-HDSI-F/D 4x12 to 2x2 downspout converter FGS-HDSI-F/C FGS-HDSI-F/C * An additional junction is needed if drop is to fitting or straight section. This 4x6 junction must be a junction type FGS-MFAW-B, FGSB-MFAW-B. Other nonstandard colors available by request. 52 www.te.com/adc 1-800-366-3891 x73000 Fax: 1-952-917-3237 4/12 104892AE

4x12 System Downspouts and Attachments 4" H x 12" W Downspout (FGS-MDSP-F) Cover for 4x12 Downspout (FGS-SDSP-F) Trumpet Flare (FGS-MTRM-F) Downspout with Rear T (FGS-MDRT-F) Island T (FGS-ISLAND-F) Island T with Recessed Dividing Spool (FGS-ISLAND3-F shown with 12" Junction, 90º Down Elbow and Trumpet Flare) 4x6 Dual 2" Flex Tube Attachment (FGS-KT03-B) 4x6 Trumpet Flare Kit (FGS-MTRM-B shown alone and attached to 4x12 Downspout) 4x12 to 4x4 Downspout Converter (FGS-HDSI-F/D) 4x12 System The FGS-HSDI-F/D attached to both the 4x12 downspout and the 4x4 slotted duct without the use of hardware 53 www.te.com/adc 1-800-366-3891 x73000 Fax: 1-952-917-3237 4/12 104892AE

4x12 System Straight Section 4" H x 12" W The unique nine-channel design of the 4x12 FiberGuide straight section provides unmatched strength and allows the attachment of support structure without the need to cut or drill holes within the raceway. This ensures that the patch cords will not come in contact with any screw heads or bolts, an important consideration in 4x4, 4x6, and 4x12 systems where higher cable counts apply increased pressure on the patch cords at the bottom of the raceway. The 4x12 system covers feature a snap-on design. This allows the cover to be used in environments with limited headroom. Two 3-foot cover sections come with each order, making it easy for one person to remove the covers. Each cover kit includes a tether kit. The straight section covers are designed to be placed over the 4x12 downspouts, speeding installation time by reducing the number of measurements and cuts that need to be made. Horizontal Straight Section (FGS-MSHS-F) Horizontal Straight Section Cover (FGS-MSSC-F includes two 3' Lengths and Tethering Hardware) Expandable Straight Section (FGS-MVAR-F) 4x12 System 12" Hinged Cover for Horizontal Straight Section (FGS-MSNC-F) ORDERING INFORMATION Straight Section Cover in Tethered Position Straight Section Cover Attached to Straight Section Description Part Number Yellow System Black System 4x12 straight section Horizontal straight section; 6' long, cover sold seperately FGS-MSHS-F FGSB-MSHS-F Expandable straight section FGS-MVAR-F FGSB-MVAR-F Slack storage straight section FGS-MSHS-STOR-F FGSB-MSHS-STOR-F 4x12 accessories Hinged cover kit for horizontal straight section; includes five mounting hinges and three clips Snap-on cover kit* for horizontal straight section; includes 3' covers, optional tethering kit FGS-MSNC-F FGS-MSSC-F FGSB-MSNC-F FGSB-MSSC-F Kit - 10 black capture clips* FGS-DHCP FGS-DHCP Kit - 10 black capture clips and 10 hinges FGS-DHHC FGSB-DHHC *See drawings on page 60 for more detail on how capture clips and hinges are used. Other nonstandard colors available by request. 54 www.te.com/adc 1-800-366-3891 x73000 Fax: 1-952-917-3237 4/12 104892AE

4x12 System Snap-Fit Junction 4" H x 12" W The new Snap-Fit junction is available for the 12-inch FiberGuide system. The Snap-Fit junction is a completely tool-less junction. No additional tools are required for installation or removal. The Snap-Fit junction exhibits superior holding force and accommodates support brackets. ORDERING INFORMATION 4x12 Snap-Fit Junction (FGS-MFAW-F) Description Part Number Yellow System Black System 4x12 Snap-Fit junction FGS-MFAW-F FGSB-MFAW-F Other nonstandard colors available by request. 4x12 System 55 www.te.com/adc 1-800-366-3891 x73000 Fax: 1-952-917-3237 4/12 104892AE

4x12 System Part Drawings 305 mm (12") 533 mm (21") 305 mm (12") 533 mm (21") 112 mm (4.4") 347 mm (13.6") 440 mm (17.3") Top 347 mm (13.7") 112 mm (4.4") 533 mm (21") Top 347 mm (13.7") Horizontal T (FGS-MHRT-F) Horizontal Cross (FGS-MHXP-F) 305 mm (12") 112 mm (4.4") 305 mm (12") 347 mm (13.7") 440 mm (17.3") 112 mm (4.4") 208 mm (8.2") 440 mm (17.3") Top 347 mm (13.7") 208 mm (8.2") Side 90 Horizontal Elbow (FGS-MH9E-F) 90 Down Elbow (FGS-MD9E-F) 112 mm (4.4") 305 mm (12") 367 mm (14.4") 305 mm (12") 112 mm (4.42") 340 mm (13.4") 53.6 mm (2.11") 135.0 4x12 System 347 mm (13.7") 398 mm (15.7") Top 45 Horizontal Elbow (FGS-MH4E-F) 347 mm (13.7") 210 mm (8.27") Side 45 Up Elbow (FGS-MU4E-F) 166 mm (6.55") 25 mm (1") 12" 45 Up FiberGuide 347 mm (13.7") 112 mm (4.4") 305 mm (12") 347 mm (13.7") 381 mm (15") Top 305 mm (12") Side 163 mm (6.4") 152 mm (6") 112 mm (4.42") 440 mm (17.3") 195 mm (7.7") 45 Down Elbow (FGS-MD4E-F) Horizontal T with (one) 6" Exit (FGS-MHRT-F/B) 56 www.te.com/adc 1-800-366-3891 x73000 Fax: 1-952-917-3237 4/12 104892AE

4x12 System Part Drawings 380 mm (15") 305 mm (12") 152 mm (6") 195 mm (7.7") 112 mm (4.4") 305 mm (12") 533 mm (21") 347 mm (13.7") Top 195 mm (7.7") 112 mm (4.4") 465 mm (18.3") Top 279 mm (11") 347 mm (13.7") 152 mm (6") Horizontal Cross with (two) 6" Exits (FGS-MHXP-F/B) 4x12 to 4x6 Dual Adapter (FGS-MDSA-F2B) 305 mm (12") 254 mm (10") 112 mm (4.4") Top 347 mm (13.7") 343 mm (13.5") 152 mm (6") 195 mm (7.7") 113 mm (4.4") 4x12 to 4x6 Adapter (FGS-MDSA-FB) End Cap (FGS-HMEC-F) 457 mm (18") 548 mm (21.6") 356 mm (14") Retracted Straight Section 559 mm (22") Expanded Straight Section Expandable Straight Section (FGS-MVAR-F) 159 mm (6.25") 533 mm (21") 305 mm (12") 508 mm (20") 4x12 System 12" Cut-in T (FGS-MHIS-F) 347 mm (13.7") 381 mm (15") Top 305 mm (12") 112 mm (4.42") 63.5 mm (2.5") 63.5 mm (2.5") 31.32 mm (12.3") 88.9 mm (3.5") 50.8 mm (2") 152 mm (6") 211 mm (8.3") 414 mm (16.3") Downspout (FGS-MDSP-F) Trumpet Flare (FGS-MTRM-F) 57 www.te.com/adc 1-800-366-3891 x73000 Fax: 1-952-917-3237 4/12 104892AE

4x12 System Part Drawings 439 mm (17.3") 318 mm (12.5") 490 mm (19.3") 267 mm (10.5") 173 mm (6.8") 267 mm (10.5") 102 mm (4") 203 mm (8") 4 mm (.2") 160 mm (6.3") Island T with Recessed Dividing Spool (FGS-ISLAND3-F) Island T (FGS-ISLAND-F) 102 mm (4") 89 mm (3.5") 279 mm (11") 94 mm (3.7") 145 mm (5.7") 272 mm (10.7") 38 mm (1.5") 73.7 mm (2.9") 533 mm (21") 127 mm (5") Straight Section (FGS-MSHS-F) 254 mm (10") 127 mm (5") 439 mm (17.3") 4x12 System Side 93.2 mm (3.7") 366 mm (14.4") End Straight Section (Not Included) Hinged Cover for Horizontal Straight Section (FGS-MSNC-F) 25 mm (1") 422 mm (16.6") 279 mm (11") Downspout with Rear T (FGS-MDRT-F) 108 mm (4.25 ) 382 mm (15 ) 133 mm (5.2 ) 305 mm (12") 89 mm (3.5") diameter 108 mm (4.25") 205 mm (12 ) Snap-Fit Junction (FGS-MFAW-F) Slack Storage Straight Section (FGS-MSHS-STOR-F) 58 www.te.com/adc 1-800-366-3891 x73000 Fax: 1-952-917-3237 4/12 104892AE

4x24 System Fittings...60 Downspouts...61 Straight Section... 62 Snap-Fit Junction... 62 Cover Kits... 62 Parts Drawings...63-64 4x24 System 59 www.te.com/adc 1-800-366-3891 x73000 Fax: 1-952-917-3237 4/12 104892AE

4x24 System Fittings 4" H x 24" W End Cap (FGS-HMEC-H) Horizontal Cross with Dual 12" Exits (FGS-MHXP-F/H) Horizontal Cross (FGS-MHXP-H) 45 Horizontal Elbow (FGS-MH4E-H) Horizontal T with Single 12" Exit (FGS-MHRT-H/F) 12" Cut-in T (FGS-MHIS-F/H) 45 Down Elbow (FGS-MD4E-H) 4x24 to 4x12 Adapter (FGS-MDSA-HF) 45 Up Elbow (FGS-MU4E-H) ORDERING INFORMATION 4x24 System Description Part Number Yellow System Black System 4x24 fittings 45 horizontal ebow FGS-MH4E-H FGSB-MH4E-H Horizontal T with single 12" exit FGS-MHRT-H/F FGSB-MHRT-H/F Horizontal T with three 24" exits FGS-MHRT-H FGSB-MHRT-H Horizontal cross FGS-MHXP-H FGSB-MHXP-H Horizontal cross with dual 12" exits FGS-MHXP-F/H FGSB-MHXP-F/H 45 up elbow FGS-MU4E-H FGSB-MU4E-H 45 down elbow FGS-MD4E-H FGSB-MD4E-H 4x24 conversions 12" cut-in T for 4x24* FGS-MHIS-F/H FGSB-MHIS-F/H 6" cut-in T for 4x24* FGS-MHIS-B/H FGSB-MHIS-B/H 4" cut-in T for 4x24* FGS-MHIS-A/H FGSB-MHIS-A/H 4x24 to 4x12 adapter FGS-MDSA-HF FGSB-MDSA-HF 4x24 end cap FGS-HMEC-H FGS-HMEC-H *Designed exclusively for the 4x24" system. Other nonstandard colors available by request. 60 www.te.com/adc 1-800-366-3891 x73000 Fax: 1-952-917-3237 4/12 104892AE

4x24 System Downspouts 4" H x 24" W 4x24 downspouts and attachments feed fiber from overhead straight sections into fiber optic equipment below. Island T with Single 12" Exit (FGS-ISLAND-H/F) Trumpet Flare (FGS-MTRM-H) ORDERING INFORMATION Description Part Number Yellow System Black System Island T with single 12" exit FGS-ISLAND-H/F FGSB-ISLAND-H/F Trumpet flare FGS-MTRM-H FGS-MTRM-H Other nonstandard colors available by request. 4x24 System 61 www.te.com/adc 1-800-366-3891 x73000 Fax: 1-952-917-3237 4/12 104892AE

4x24 System Straight Section, Snap-Fit Junctions and covers 4" H x 24" W Straight Section The unique double wall channel design of the 4x24 straight section provides exceptional strength and durability for high fiber count applications and allows the standard system to be attached to the support structure without the need to cut or drill any holes within the trough. The six channel design ensures that the patch cords will not come in contact with any screw heads or bolts, an important consideration in 4x24 systems where higher cable counts apply increased pressure on patch cords at the bottom of the trough. Straight Section (FGS-MSHS-H) ORDERING INFORMATION Description Part Number Yellow System Black System 4x24 straight section; horizontal straight section, 6' long FGS-MSHS-H FGSB-MSHS-H Snap-Fit Junction The Snap-Fit Junction assembly is available for the 24-inch FiberGuide System. The Snap-Fit junction is a completely tool-less junction. No additional tools are required for installation or removal. The junction exhibits superior holding force and accommodates support brackets. A warning label is included with each junction kit. ORDERING INFORMATION Snap-Fit Junction (FGS-MFAW-H) Description Part Number 4x24 System Yellow System Black System 4x24 Snap-Fit junction FGS-MFAW-H FGSB-MFAW-H Other nonstandard colors available by request. Cover Kits ORDERING INFORMATION Description Cover for 4"x24"x6' straight section - FGS-MSHS-H Cover for 4"x24"horizontal tee with single 12" Exit - FGS-MHRT-H/F Cover for 4"x24"horizontal cross with dual 12" Exits - FGS-MHXP-F/H Cover for 4"x24"horizontal cross - FGS-MHXP-H Cover for 4"x24" 45 horizontal elbow - FGS-MH4E-H Cover for 4"x24"horizontal tee - FGS-MHRT-H Cover for 4"x24" 4 down elbow - FGS-MD4E-H Cover for 4"x24" to 4"x12" reducer - FGS-MDSA-HF Part Number FGS-FSFC-H FGS-FHRT-H/F FGS-FHXP-F/H FGS-FHXP-H FGS-FH4E-H FGS-FHRT-H FGS-FD4E-H FGS-FDSA-HF 62 www.te.com/adc 1-800-366-3891 x73000 Fax: 1-952-917-3237 4/12 104892AE

4x24 System Part Drawings 102 mm (4") 89 mm (3.5") 584 mm (23") 94 mm (3.7") 697 mm (27.5") 144 mm (5.7") 108 mm (4.25") 576.6 mm (22.7") Straight Section (FGS-MSHS-H) 610 mm (24") Snap-Fit Junction (FGS-MFAW-H) 127 mm (5") 610 mm (24") 4 x 24 Straight Section FGS-MSHS-H 581 mm (22.9") 4x24 Snap-Fit Junction FGS-MFAW-H 610 mm (24") 120 mm 305 mm (4.7") (12") 533.1 mm (20.99") 745 mm (29.3") 120 mm (4.7") 652 mm (25.7") 701 mm (27.6") 4x24 45 Horizontal 45 Elbow Horizontal Elbow FGS-MH4E-H (FGS-MH4E-H) 652 mm (25.7") 347 mm (13.7") Horizontal T with Single 12" Exit (FGS-MH4E-H) 4x24 Horizontal T with Single 12" Exit MGS-MHRT-H/F 533 mm (21") 610 mm (24") 120 mm (4.7") 652 mm (25.7") 610 mm (24") 120 mm 305 mm (4.7") (12") 838 mm (33") 652 mm (25.7") 838 mm (33") 4x24 Horizontal Cross FGS-MHXP-H Horizontal Cross (FGS-MHXP-H) 838 mm (33") Horizontal Cross with Dual 12" Exits 4x24 Horizontal Cross with (FGS-MHXP-F/H) Dual 12" Exits FGS-MHXP-F/H 347 mm (13.7") 4x24 System 795 mm (31.3") 470 mm (18.5") 419 mm (16.5") 645 mm (25.4") 203 mm (8") 160 mm (6.3") 4 mm (.2") 114 mm (4.5") End Cap (FGS-HMEC-H) 4x24 End Cap FGS-HMEC-H Island T with Single 12" Exit 4x24 Island (FGS-ISLAND-H/F) T with Single 12" Exit FGS-ISLAND-H/F 4x24 to 4x12 Adapter 4x24 (FGS-MDSA-HF) x 4x12 Adapter FGS-MDSA-HF 63 www.te.com/adc 1-800-366-3891 x73000 Fax: 1-952-917-3237 4/12 104892AE

4x24 System Part Drawings 114 mm (4.5") 160 mm (6.3") 134.3 mm (5.3") 736 mm (29") 610 mm (24") 78 mm (3.1") 647 mm (25.5") 610 mm (24") Trumpet 4x24 Trumpet Flare Kit (FGS-MTRM-H) FGS-MTRM-H 4x24 45 Up Elbow45 Up Elbow FGS-MU4E-H (FGS-MU4E-H) 345 mm (13.6") 128 mm (5") 330 mm (13") 610 mm (24") 117 mm (4.6") 178 mm (7") 4" Cut-in T Adapter Bracket 102 mm (4") 4x24 45 Down Elbow FGS-MD4E-H 45 Down Elbow (FGS-MD4E-H) SIDE 305 mm (12") 4" Cut-in T designed exclusively for the 4x24 System (FGS-MHIS-A/H) 4x4 Cut-in T for 4x24 FiberGuide FGS-MHIS-A/H 128 mm (5") 396 mm (15.6") 128 mm (5") 548 mm (21.6") 6" Cut-in T Adapter Bracket 381 mm (15") 152 mm (6") 12" Cut-in T Adapter Bracket 533 mm (21") 305 mm (12") 4x24 System 356 mm (14") 4x6 Cut-in T for 4x24 FiberGuide 6" Cut-in T designed FGS-MHIS-B/H exclusively for the 4x24 System (FGS-MHIS-B/H) 508 mm (20") 4x12 Cut-in T for 4x24 FiberGuide 12" Cut-in T designed FGS-MHIS-F/H exclusively for the 4x24 System (FGS-MHIS-F/H) 64 www.te.com/adc 1-800-366-3891 x73000 Fax: 1-952-917-3237 4/12 104892AE

Express Exit Family 4-Inch Express Exit... 66 2-Inch Express Exit...67 Low-Profile Express Exit...67 Attachments...67 Parts Drawings... 68 Express Exit Family 65 www.te.com/adc 1-800-366-3891 x73000 Fax: 1-952-917-3237 4/12 104892AE

Express Exit Family For 4x4, 4x6, 4x12, and 4x24 Systems The patented* Express Exit family accommodates various raceway environments and applications. By simply securing an Express Exit to the sidewall of any 4x4, 4x6, 4x12, or 4x24 FiberGuide straight section, jumpers can be permanently or temporarily routed to fiber optic terminal (FOT) equipment below. No cutting of the FiberGuide system is required. Positioning a drop with a member of the Express Exit family greatly simplifies installation, protects the integrity of fibers already present in the raceway, and increases overall flexibility of the raceway system. All Express Exits guarantee 2-inch bend radius protection. Express Exit Family Express Exit Style Height Above Sidewall Exit Opening 3 mm Patch Cord Capacity 2 mm Patch Cord Capacity Hinged Rear Cover Exit Fin Inserts 2-Inch Express Exit Low-Profile Express Exit 4-Inch Express Exit 4" 2" x 2"1 150 350 No No 2" 2" x 2"1 150 350 No No 4" 4" x 4"2 300 700 Yes Yes 1 Accepts all standard 2x2" attachments. 2 Accepts all standard 4x4" attachments. 4-Inch Express Exit The 4-Inch Express Exit is designed to distribute and manage medium cable counts to FOT or ODF equipment. It features a 4-inch by 4-inch exit opening to accept all standard 4x4 downspout attachments and includes insertable exit fins and removable rear cable guides for additional cable management. See page 90 for 4-Inch Express Exit downspout attachments. 4-Inch Express Exit Express Exit Family ORDERING INFORMATION Description 4-inch Express Exit Express Exit; base, base cover, mounting hardware, support bracket, and exit inserts included 4-inch accessories Express Exit rear hinged cover kit; one 4x4, 4x6, 4x12 rear hinged cover Part Number Yellow System FGS-MEXP-E-A/B/F FGS-MEXC-E-A/B/F Black System FGSB-MEXP-E-A/B/F FGSB-MEXC-E-A/B/F Express Exit rear hinged cover for 4x4 raceway FGS-MEXC-E-A FGSB-MEXC-E-A Express Exit rear hinged cover for 4x6 raceway FGS-MEXC-E-B FGSB-MEXC-E-B Express Exit rear hinged cover for 4x12 raceway FGS-MEXC-E-F FGSB-MEXC-E-F Other nonstandard colors available by request. *Other patents pending. 66 www.te.com/adc 1-800-366-3891 x73000 Fax: 1-952-917-3237 4/12 104892AE

Express Exit Family For 4x4, 4x6, 4x12, and 4x24 Systems 2-Inch Express Exit The 2-Inch Express Exit accommodates up to 350, 2 mm patch cords. The patch cords are routed from a 4x4, 4x6, 4x12 or 4x24 straight section to FOT equipment below the raceway. ORDERING INFORMATION 2-Inch Express Exit Description Part Number 2-Inch Express Exit base, base cover, mounting hardware and support bracket included Yellow System FGS-MEXP-A/B/F Black System FGSB-MEXP-A/B/F Low-Profile Express Exit Designed for low-ceiling or height-restricted environments, the Low-Profile Express Exit features a front-removable cover and extends only 2 inches above the FiberGuide straight section sidewall. It also includes removable rear cable guides for additional cable management. Low-Profile Express Exit ORDERING INFORMATION Description Part Number Low-Profile Express Exit base, base cover, mounting hardware and support bracket included Yellow System FGS-MEXP-LP-A/B/F Black System FGSB-MEXP-LP-A/B/F Attachments for 2-Inch Express Exit and Low-Profile Express Exit ORDERING INFORMATION Description Part Number Yellow System Black System 2x2 trumpet flare; junction included FGS-MTRM-C FGS-MTRM-C Single 2" flex tube attachment; 2" flex tube and a 2x2 junction to attach to Express Exit unit included 5' length FGS-MEX1-C-5F FGSB-MEX1-C-5F 10' length FGS-MEX1-C-10F FGSB-MEX1-C-10F Express Exit Family 15' length FGS-MEX1-C-15F FGSB-MEX1-C-15F Dual 7/8" flex tube attachment; two lengths of 7/8" flex tube and a 2" junction to attach to Express Exit unit included (2) 5' lengths FGS-KT03-C FGSB-KT03-C (2) 10' lengths FGS-KT03-C-10F FGSB-KT03-C-10F (3) 15' lengths FGS-KT03-C-15F FGSB-KT03-C-15F 67 www.te.com/adc 1-800-366-3891 x73000 Fax: 1-952-917-3237 4/12 104892AE

Express Exit Part Drawings Express Exit 2x4 406 mm (16") 103 mm (4.1") 196 mm (7.7") Bracket, Express Exit 2x4 200 mm (7.9") 4-Inch Express Exit (FGS-MEXP-E-A/B/F shown attached to 4x4 straight section) 95 mm (3.75") 51 mm (2") Express Exit 125 mm (4.9") 254 mm (10") Bracket, Express Exit 147 mm (5.8") 2-Inch Express Exit (FGS-MEXP-A/B/F; fits 4x4, 4x6 and 4x12 systems; shown attached to 4x6 straight section) Low Profile Express Exit 260 mm (10.25") 51 mm (2") 132 mm (5.2") Express Exit Family 130 mm (5.1") Low-Profile Express Exit (FGS-MEXP-LP-A/B/F; fits 4x4, 4x6 and 4x12 systems; shown attached to 4x4 straight section) 133 mm (5.2") 47 mm (1.9") 268 mm (10.6") 131 mm (5.16") Low-Profile Express Exit Designed Exclusively for 2x6 System (FGS-MEXP-LP-G shown attached to 2x6 straight section) 68 www.te.com/adc 1-800-366-3891 x73000 Fax: 1-952-917-3237 4/12 104892AE

Vertical Fiber Management Systems 2" and 4" Solid and Slotted Duct Kits and Components... 70 2"x 2" Accessories...72 4"x 4" and 4"x 2" Accessories...73 Vertical Fiber Management Systems 69 www.te.com/adc 1-800-366-3891 x73000 Fax: 1-952-917-3237 4/12 104892AE

Vertical Fiber Management Systems Vertical Solid and Slotted Duct Kits Now with Hinged Covers 2x2 Solid Vertical Duct Kit (FGS-KTW1-JN) (cover closed) 2x4 Solid Vertical Duct Kit (FGS-KTW2-RN) (cover open) 4x4 Slotted Vertical Duct Kit (FGS-KTW2-J) Shown with cover removed 90 Inside Elbow (FGS-V9E44) Vertical Fiber Management Systems 4-Inch Vertical to 2x2 Trumpet Fitting (FGS-TRMP42) Applications 2-Inch Exit Trumpet (FGS-VQE22) 4-Inch Exit Trumpet (FGS-VQE44) 4x4 Modified Trumpet Flare Kit (FGS-MTRM-D) 2x2 Slotted Duct with 2-Inch Exit Trumpet (FGS-KTW1-JA with FGS-VQE22 attached) 4x4 Slotted Duct with 4-Inch Exit Trumpet (FGS-KTW2-K with FGS-VQE44 attached) 4x4 Slotted Duct with Entrance Trumpet Flare at top and 4-Inch to 2x2 Exit Trumpet (FGS-KTW2-K with FGS-MTRM-D and FGS-TRMP42 attached) 2x2 Slotted Duct with 2-Inch Exit Trumpet in horizontal application - can be attached to the 4-Inch to 2x2 Exit Trumpet (FGS-KTW1-JA with FGS-VQE22 attached) 70 www.te.com/adc 1-800-366-3891 x73000 Fax: 1-952-917-3237 4/12 104892AE

Vertical Fiber Management Systems 2" and 4" Vertical Solid and Slotted Duct Kits and Components ORDERING INFORMATION Description 2x1 System (1" wide x 2" deep) Part Number Yellow System Black System 2x1, vertical slotted duct kit (4" slot spacing), pop-off covers FGS-KTW1-E FGSB-KTW1-E 2x1, vertical solid duct kit, pop-off covers FGS-KTW4-E FGSB-KTW4-E 2x2 to 2x1 conversion piece (order when converting from 2x2 to 2x1 system) 2X2 System (2" wide x 2" deep) 2x2, 6' vertical duct kit*, slotted (1.5" slot spacing) hinged cover 2x2, 6' vertical duct kit*, slotted (4" slot spacing) hinged cover FGS-ACC063 FGS-KTW1-JA FGS-KTW1-JB FGSB-ACC063 FGSB-KTW1-JA FGSB-KTW1-JB 2x2, 6' vertical duct kit*, solid, hinged cover FGS-KTW1-JN FGSB-KTW1-JN 2x4 system (2" wide x 4" deep) 2x4, 6' vertical duct kit*, slotted (2" slot spacing) hinged cover FGS-KTW2-R FGSB-KTW2-R 2x4, 6' vertical duct kit*, solid, hinged cover FGS-KTW2-RN FGSB-KTW2-RN 4x4 system (4" wide x 4" deep) 4x4, 6' vertical duct kit*, slotted (2" slot spacing) hinged cover 4x4, 6' vertical duct kit*, slotted (4" slot spacing) hinged cover FGS-KTW2-K FGS-KTW2-J FGSB-KTW2-K FGSB-KTW2-J 4x4, 6' vertical duct kit*, solid, hinged cover FGS-KTW2-JN FGSB-KTW2-JN 4x2 system (4" wide x 2" deep) 4x2, 6' vertical duct kit*, slotted (1.5" slot spacing) hinged cover FGS-KTW2-T FGSB-KTW2-T 4x2, 6' vertical duct kit*, solid, hinged cover FGS-KTW2-TN FGSB-KTW2-TN Trumpets and elbows 4" deep vertical to 2x2 trumpet to horizontal fitting FGS-TRMP42 FGSB-TRMP42 4" deep vertical to 4x4 trumpet to horizontal fitting FGS-TRMP44 FGSB-TRMP44 4" exit to horizontal trumpet for vertical channel, 1" bend radius 2" exit to horizontal trumpet for vertical channel, 1" bend radius FGS-VQE44 FGS-VQE22 FGS-VQE44 FGS-VQE22 2x4 entrance trumpet flare kit FGS-MTRM-DS FGSB-MTRM-DS 4x4 entrance trumpet flare kit FGS-MTRM-D FGSB-MTRM-D 4" deep 90º inside elbow FGS-V9E44 FGSB-V9E44 Components 2x2 vertical slotted duct (1.5" slot spacing); 6' Long FGS-MSHS-CB FGSB-MSHS-CB Hinged cover for 2x2 duct; 6' long FGS-MSHC-J FGSB-MSHC-J 2x4 slotted duct, 2" slot spacing FGS-MSHS-K FGSB-MSHS-K 2x4 solid duct, vertical FGS-MSHS-KN FGSB-MSHS-KN 4x4 slotted duct, 2" slot spacing FGS-MSHS-KT FGSB-MSHS-KT 4" cover - hinged FGS-MSHC-K FGSB-MSHC-K 4x4 slotted duct, 4" slot spacing FGS-MSHS-KF FGSB-MSHS-KF 4x4 solid duct, vertical FGS-MSHS-KS FGSB-MSHS-KS Vertical Fiber Management Systems * Universal mounting brackets included in kit. 71 www.te.com/adc 1-800-366-3891 x73000 Fax: 1-952-917-3237 4/12 104892AE

Vertical Fiber Management Systems 2"x 2" Accessories 2"x 2" Vertical Duct Universal Mounting Brackets (FGS-HWMB-C) ORDERING INFORMATION Description Part Number Yellow System Black System Vertical Fiber Management Systems 2x1 System (1" wide x 2" deep) 2x2 vertical slotted duct universal mounting bracket; kit of 5 typically five brackets used for every 6' section of 2x2 vertical duct 2x2 adapter junction kit; used to join new 2x2 Vertical duct with hinged cover to standard 2x2 FiberGuide profile Other nonstandard colors available by request. FGS-HWMB-C FGS-MJWRM-C FGS-HWMB-C FGSB-MJWRM-C 72 www.te.com/adc 1-800-366-3891 x73000 Fax: 1-952-917-3237 4/12 104892AE

Vertical Fiber Management Systems 4"x 4" and 4"x 2" Accessories 4"x 4" Vertical Duct Mounting Bracket (FGS-HWMB-D) ORDERING INFORMATION Description 2x1 System (1" wide x 2" deep) 4x4 vertical slotted duct mounting bracket; typically three brackets used for every 6' section of 4x4 vertical duct Part Number Yellow System FGS-HWMB-D Black System FGS-HWMB-D 4x2 vertical slotted duct mounting bracket; kit of 10 FGS-HKW2-E FGS-HKW2-E 4x2 vertical slotted duct cap FGS-HMEC-E FGS-HMEC-E 4x4 adapter junction kit; used to join new 4x4 vertical duct with hinged cover to standard 4x4 FiberGuide profile Other nonstandard colors available by request. FGS-MJWR-D FGSB-MJWR-D Vertical Fiber Management Systems 73 www.te.com/adc 1-800-366-3891 x73000 Fax: 1-952-917-3237 4/12 104892AE

RiserGuide On-Demand Cable Management Introduction...76 Installation and Removal...77 Specifications...78 RiserGuide On-Demand Cable Management 75 www.te.com/adc 1-800-366-3891 x73000 Fax: 1-952-917-3237 4/12 104892AE

RiserGuide On-Demand Cable Management Introduction Because cable management requirements change with network requirements, the FiberGuide product family includes a riser guidance system, designed to provide cable management where you need it, when you need it. RiserGuide is modular and easy to both install and remove, allowing for flexible cable management and full network optimization. FEATURES Multiple standard width risers Multiple standard width risers RiserGuide On-Demand Cable Management Various components that can be installed anywhere on the riser including storage spools, radius limiters and cable guides Mountable within and between racks and in cabinets Half and full slack storage spools available Breakout cable slack storage Half and full slack storage spools available Breakout cable slack storage BENEFITS: Provides flexible, on demand cable management Manages patch cords off active equipment up to FiberGuide Protects proper bend radius Easy to configure with simple, Snap-Fit, tool-free installation Designed to meet GR-63 requirements Provides a cable management solution that extends beyond the out of the box solutions that are currently available 76 www.te.com/adc 1-800-366-3891 x73000 Fax: 1-952-917-3237 4/12 104892AE

RiserGuide On-Demand Cable Management Installation and Removal, Specifications Installation and Removal Removal Installation RiserGuide On-Demand Cable Management Specifications CABLE GUIDE BRACKET 10.77 cm 4.24" 9.45 cm 3.72" 7.62 cm 3.00" 10.77 cm 4.24" 14.07 cm 5.54" 13.77 cm 5.42" 9.45 cm 3.72" 14.07 cm 5.54" 13.77 cm 5.42" 7.62 cm 3.00" 7.57 cm 2.98" RGS-VC002-B RGS-VC001-B 5.08 cm 2.02" 2.67 cm 1.05" 7.57 cm 2.98" 5.08 cm 2.02" 2.67 cm 1.05" RGS-VC003-B EDGE PROTECTORS 7.62 cm 3.00" 13.08 cm 5.15" 12.78 cm 5.03" 7.57 cm 2.98" RGS-RC006-B 7.57 cm 2.27" 2.87 cm 1.13" RGS-RC005-B 7.95 cm 3.13" 1.5 INCH BEND RADIUS SPOOLS RGS-SC003-B RGS-SC002-B 11.43 cm 4.50" 7.62 cm 3.00" 13.00 cm 5.12" 12.70 cm 5.00" 5.72 cm 2.25" 7.57 cm 2.98" 11.48 cm 4.52" 5.72 cm 2.25" RGS-SC001-B RGS-SC001-B8 77 www.te.com/adc 1-800-366-3891 x73000 Fax: 1-952-917-3237 4/12 104892AE 7.5 2

RiserGuide On-Demand Cable Management Specifications Radius Limiting Edge Protectors RGS-RC001-B RGS-RC002-B RGS-RC003-B RGS-RC004-B RGS-TC001-B 7.62 cm 3.00" RiserGuide On-Demand Cable Management 2.97 cm 1.17" 8.43 cm 3.32" 7.62 cm 3.00" 2.97 cm 1.17" 8.43 cm 3.32" 7.57 cm 2.98" 7.95 cm 3.13" 7.95 cm 3.13" 7.65 cm 3.01" 7.65 cm 3.01" 7.57 cm 2.98" RGS-VC001-B (For Reference Only) Vertical Riser Channel Pack Vertical Risers 12.70 cm 5.00" 25.4 cm 10.00" Washer (12) RGS-RA001-B "L" Bracket (6) Screw #12 X.250 (12) RGS-VRACC-CRKITP 213.36 cm 7 RGS-V0CX0A-P 78 213.36 cm 7 RGS-V0BX0A-P www.te.com/adc 1-800-366-3891 x73000 Fax: 1-952-917-3237 4/12 104892AE

RiserGuide On-Demand Cable Management Ordering Information ORDERING INFORMATION Description Part Number Cable guide bracket RGS-VC001-B 1.5" Radius limiter for cable guide bracket RGS-RA001-B Edge protectors Edge protector for left-hand cable entry/exit RGS-RC005-B Edge protector for right-hand cable entry/exit RGS-RC006-B 1.5 Bend radius spool Full spool, 5" D RGS-SC001-B Full spool, 8" D RGS-SC001-B8 Half spool top, 5" D RGS-SC002-B Half spool bottom, 5" D RGS-SC003-B Radius limiting edge protector Fiber exit right/down RGS-RC001-B Fiber exit left/down RGS-RC002-B Fiber exit right/up RGS-RC003-B Fiber exit left/up RGS-RC004-B Vertical risers 7 x 10 riser (putty) RGS-V0CX0A-P 7 x 5 riser (putty) RGS-V0BX0A-P 8' x 10" riser (putty) RGS-V0CX0B-P 8' x 5" riser (putty) RGS-V0BX0B-P Channel rack installation kit for vertical riser Putty RGS-VRACC-CRKITP Black RGS-VRACC-CRKITB Vertical Cable Guide 2.75" wide RGS-VC003-B 3.75" wide RGS-VC002-B Cable Clamp RGS-TC001-B RiserGuide On-Demand Cable Management 79 www.te.com/adc 1-800-366-3891 x73000 Fax: 1-952-917-3237 4/12 104892AE

2x2 System Support Kits 2x2 System... 82-83 Support Kit Drawings... 84 Support Kits 81 www.te.com/adc 1-800-366-3891 x73000 Fax: 1-952-917-3237 4/12 104892AE

2x2 System Support Kits Direct Support Kits Ladder Rack Support Kit (FGS-HLR2-C shown alone and attached to ladder rack) Bay Top Support Short L Bracket Kit (FGS-BTBS-C) Bay Top Support Long L Bracket Kit (FGS-BTBL-C) Digital Cableway Support Kit (FGS-HDCB-C) Under Floor Support Kit (FGS-HUFB-C shown alone and attached to.62" round pipe) ORDERING INFORMATION Description 2x2 direct support kits Ladder rack support kit; for use with 3.5" (maximum) ladder rack Bay top support short L bracket kit Bay top support long L bracket kit Digital cableway support kit Under floor support kit; can be secured to.62" to 1.2" round or square post Part Number FMT-ACCWLMT01 FGS-HLR2-C FGS-BTBS-C FGS-BTBL-C FGS-HDCB-C FGS-HUFB-C Note: Recommended spacing of direct support kits is every 2' to 3'. Custom brackets are available, please contact TE Connectivity. Support Kits 82 www.te.com/adc 1-800-366-3891 x73000 Fax: 1-952-917-3237 4/12 104892AE

2x2 System Support Kits Aluminum Track Support Kit Aluminum Extrusion Connector Bar Lock Washer Cap Screw Aluminum Extrusion Connector Bar Lock Washer End-to-End Assembly Method Cap Screw Aluminum Track Support Kit (FGS-HASK-C) New Threaded Rod Bracket Kit (FGS-HTR2-XX shown alone and attached to aluminum track support) Existing Threaded Rod Bracket Kit (FGS-HTR2-2-5/8) ORDERING INFORMATION Description 2x2 aluminum track support kit; 6' long, track connecting bar kit included aluminum track is self-supporting for spans up to 6' 2x2 bracket kits; used to support aluminum track kits New threaded rod bracket kit; 5/8" New threaded rod bracket kit; 1/2" Existing threaded rod bracket kit; 5/8" for up to two 2x2 FiberGuide Systems Track connecting bar kit; used to join two aluminum track kits; order only if extras are needed Part Number FGS-HASK-C FGS-HTR2-5/8 FGS-HTR2-1/2 FGS-HTR2-2-5/8 FGS-HAEJ-C Support Kits 83 www.te.com/adc 1-800-366-3891 x73000 Fax: 1-952-917-3237 4/12 104892AE

2x2 System Support Kits Support Kit Drawings 68 mm (2.7") Straight Section (Not Included) 57 mm (2.3") Existing Ladder Rack 76 mm (3") Support Bracket End 6 mm (.25") 84 mm (3.3") Top 51 mm (2") End Support Bracket Top 136 or 392 mm (5.3 or 15.5") 92 mm (3.6") 44 mm (1.75") Ladder Rack Support Kit (FGS-HLR2-C shown alone and attached to ladder rack) Bay Top Support Short L Bracket Kit (FGS-BTBS-C, FGS-BTBL-C) 38 mm (1.5") Top Support Bracket Post 115 mm (4.5") Straight Section (Not Included) Support Bracket 230 to 256 mm (9.1 to 10.1") Side Digital Cableway (Not Included) 76 mm (3") Side Straight Section (Not Included) 77 mm (3") End Digital Cableway Support Kit (FGS-HDCB-C) Under Floor Support Kit (FGS-HUFB-C shown attached to.62"x 2" round pipe) Support Kits Connector Bar Lock Washer Cap Screw Aluminum Extrusion End-to-End Assembly Method Aluminum Track Support Kit (FGS-HASK-C) Aluminum Extrusion Connector Bar Lock Washer Cap Screw Support Bracket End 60 mm (2.4") 73 mm (2.9") Threaded Rod (Not Included) Side New Threaded Rod Bracket Kit (FGS-HTR2 shown attached to aluminum track support) Straight Section (Not Included) Aluminum Extrusion (Not Included) 84 www.te.com/adc 1-800-366-3891 x73000 Fax: 1-952-917-3237 4/12 104892AE

2x6, 4x4, 4x6 System Support Kits 2x6, 4x4, 4x6 Systems... 86 Support Kit Drawings... 87-88 Support Kits 85 www.te.com/adc 1-800-366-3891 x73000 Fax: 1-952-917-3237 4/12 104892AE

2x6, 4x4, 4x6 System Support Kits Ladder Rack Cantilever Support Bracket Kit (FGS-HDLB-4) L Bay Support Bracket Kit (FGS-HLBK shown alone and attached to 4x4 FiberGuide) New Threaded Rod Bracket kit (FGS-HNTR-XX shown alone and attached to threaded rod) Existing Threaded Rod Bracket Kit (FGS-HETR-XX shown alone and attached to threaded rod) Modified New Threaded Rod Bracket Kit (FGS-HNTR-5/8-A shown alone and attached to threaded rod) Top Support Low Profile C-bracket Kit (FGS-HNTS-XX-LP) Top Support C-Bracket Kit (FGS-HNTS-XX) Modified Existing Threaded Rod Bracket Kit (FGS-HETR-5/8-A shown alone and attached to threaded rod) Center Support Bracket Kit (FGS-HTUB-XX) ORDERING INFORMATION Support Kits Description 2x6, 4x4, 4x6 system support kits Ladder rack cantilever support bracket kit L bay support bracket kit New threaded rod bracket kit; (XX = size: 1/2", 5/8", 12 mm, 14 mm, 16 mm, 18 mm) Existing threaded rod bracket kit; (XX = size: 1/2", 5/8", 12 mm, 14 mm, 16 mm) Modified new threaded rod bracket kit; 5/8" Top support low-profile C-bracket kit; (XX = size: 1/2", 5/8", 12 mm, 14 mm, 16 mm) Top support C-bracket kit; (XX = size: 1/2", 5/8", 12 mm, 14 mm, 16 mm) Modified existing threaded rod bracket kit; 5/8" Center support bracket kit; (XX = size: 1/2", 5/8", 12 mm, 14 mm, 16 mm, 20 mm) Digital cableway bracket kit; 305 mm (12") Digital cableway bracket kit; 381 mm (15") Ladder rack center support bracket kit OMX frame center support bracket kit; 16 mm (.63") Under floor support bracket kit Custom brackets are available, please contact TE Connectivity. Part Number FGS-HDLB-3 FGS-HLBK FGS-HNTR-XX FGS-HETR-XX FGS-HNTR-5/8-A FGS-HNTS-XX-LP FGS-HNTS-XX FGS-HETR-5/8-A FGS-HTUB-XX FGS-HCBL-12 FGS-HCBL-15 FGS-HNLR-AB FGS-HOMX-16MM FGS-HUFB-A 86 www.te.com/adc 1-800-366-3891 x73000 Fax: 1-952-917-3237 4/12 104892AE

2x6, 4x4, and 4x6 System Support Kits Support Kit Drawings 1/2-13 OR 5/8-11 Threaded Rod (Not Supplied) 25 mm (1") A Closed-End Bracket 156 mm (6.1") for 4x4 207 mm (8.14") For 6x4 173 mm (6.8") 24.9 mm (9.8") 381 mm 25.4 mm (1.5") (1") 47.2 mm (1.86") 9.42 mm (3.71") 142 mm (5.57") 122 mm (4.8") A 136 mm (5.4") 7.1 mm (.28") 51 mm (2") 25.4 mm (1") New Threaded Rod Bracket Kit (FGS-HNTR-XX shown alone and attached to threaded rod) Section A-A Closed-End Bracket Existing 1/2-13 or 5/8-11 Threaded Rod Threaded Rod Clip 52 mm (2.1") 44 mm (1.7") A 50 mm (2") 156 mm (6.1") for 4x4 207 mm (8.14") for 6x4 Open-End Bracket 268 mm (10.5") 52 mm (2.1") 173 mm (6.8") 47 mm (1.9") 122 mm (4.8") A 138 mm (5.4") 94 mm (3.7") 142 mm (5.6") 38 mm (1.5") Existing Threaded Rod Bracket Kit (FGS-HETR-XX shown alone and attached to threaded rod) 7 mm (.3") 25 mm (1") 51 mm (2") Section A-A Open-End Bracket Threaded Rod Clip Existing 1/2-13 or 5/8-11 Threaded Rod 48 mm (1.9") 4" Fiber Guide Shown For Reference 122 mm (4.8") 10 mm (.4") Threaded Rod Clip 52 mm (2.1") 50 mm (2") 68 mm (2.7") 274 mm (10.8") Open-End Bracket 57 mm (1.5") 85 mm (3.4") 132 mm (5.2") 180 mm (7.1") 7 mm (.3") 51 mm (2") 127 mm (5") 38 mm (1.5") 61 mm (2") Modified Existing Threaded Rod Bracket Kit (FGS-HETR-XX-A shown alone and attached to threaded rod) Ladder Rack Center Support Bracket Kit (FGS-HNLR-AB) 10 mm (.4") 22 mm (.9") 7 mm (.3") 45 mm (1.75") 38 mm (1.5") 6 mm (.25") 64 mm (2.5") 64 mm (2.5") 13 mm (.5") 117 mm (4.6") 127 mm (5") Support Kits 16 mm (.6") 55 mm (2.2") 360 mm (14.2") 38.1 mm OMX Frame Center Support Bracket (1.5") Kit (FGS-HOMX-16MM) 88.9 mm (3.5") 50.8 mm (2") Under Floor Support Bracket Kit (FGS-HUFB-A) 87 www.te.com/adc 1-800-366-3891 x73000 Fax: 1-952-917-3237 4/12 104892AE

2x6, 4x4, and 4x6 System Support Kits Support Kit Drawings 406 mm 483 mm (16" 19") Equipment Rack 38 mm (1.5") 12 mm (4") 13 mm (.5") 3/8-16 122 mm (4.8") 51 mm (2") Cableway Shown for Reference 130 mm (5.1") 12-24 x 3/8 Pan Head Screw 171 mm (6.75") 406 mm 483 mm (16" 19") Support Bracket (FGS-HLBK shown alone and attached to 4" FiberGuide) Digital Cableway Bracket Kit (FGS-HCBL shown alone and attached to 4" FiberGuide ) 5/8-11 Threaded Rod Shown for Reference PNT0 39 mm (1.5") New Threaded Rod Bracket Kit Shown for Reference 117 mm (4.6") PNT0 63.5 mm (2.5") PNT0 64 mm (2.5") 80 mm (3.2") Lock Washer (2) Unistrut Nut Kit (FGS-HDGR) Center Support Bracket (FGS-HTUB) Threaded Rod 4" ADC FIBERGUI SHOWN F REFERENC 185 mm (7.3") 305 mm (12") Support Kits 221 mm (8.7") Ladder Rack Cantilever Support Bracket Kit (FGS-HDLB-4) 6" Trough with Cover Top Support C-Bracket (FGS-HNTS) FOR WALL MOUNT Quick 1/2" Knob BOLT Assembly HOLES THREADED ROD (REF) 4" OR 6" TROUGH (REF) 197 mm (7.75") QUICK KNOB ASSEMBLY 203 mm (8") 6" Trough 203 mm (8") 254 mm (1") Top Support Low-Profile C-Bracket (FGS-HNTS-LP) 88 www.te.com/adc 1-800-366-3891 x73000 Fax: 1-952-917-3237 4/12 104892AE

4x12 System Support Kits 4x12 System...90 Support Kit Drawings...91 Support Kits 89 www.te.com/adc 1-800-366-3891 x73000 Fax: 1-952-917-3237 4/12 104892AE

4x12 System Support Kits Existing Ladder Rack Center Support Bracket Kit (FGS-HETP-F-XX) Trapeze Bracket Kit (FGS-HNTP-F-XX) Center Support Threaded Rod Bracket Kit (FGS-HTUB-F-XX shown alone and attached to threaded rod) Top Support Low-Profile Threaded Rod Bracket Kit (FGS-HNTS-F-XX-LP shown alone and attached to threaded rod) Top Support Threaded Rod Bracket Kit (FGS-HNTS-F-XX) New Threaded Rod Bracket Kit (FGS-HNTR-F-XX) Existing Threaded Rod Bracket Kit (FGS-HETR-F-XX) Support Kits ORDERING INFORMATION Description 4x12 system support kits New ladder rack center support bracket kit Existing ladder rack center support bracket kit; (XX = size: 1/2", 5/8", 12 mm, 14 mm, 16 mm) Trapeze bracket kit; (XX = size: 1/2", 5/8", 12 mm, 14 mm, 16 mm) Center support threaded rod bracket kit; (XX = size: 1/2", 5/8", 12 mm, 14 mm, 16 mm, 20 mm) Top support low-profile threaded rod C-bracket kit; (XX = size: 1/2", 5/8", 12 mm, 14 mm, 16 mm) Top support threaded rod C-bracket kit; (XX = size: 1/2", 5/8", 12 mm, 14 mm, 16 mm) New threaded rod bracket kit; (XX = size: 5/8", 14 mm, 16 mm, 18 mm) Existing threaded rod bracket kit; (XX = size: 5/8", 14 mm, 16 mm) Part Number FGS-HNLR-F FGS-HETP-F-XX FGS-HNTP-F-XX FGS-HTUB-F-XX FGS-HNTS-F-XX-LP FGS-HNTS-F-XX FGS-HNTR-F-XX FGS-HETR-F-XX 90 www.te.com/adc 1-800-366-3891 x73000 Fax: 1-952-917-3237 4/12 104892AE

4x12 System Support Kits Support Kit Drawings 51 mm (2") 419 mm (16.5") 32 mm (1.25") Split Nut Bracket Clip 12" FiberGuide Bottom Bracket 32 mm (1.25") 32 mm (1.25") Threaded Rod Ref Cantilever Bracket 419 mm (16.5") T-Bolt New Threaded Rod Bracket Kit (FGS-HNTR-F-XX shown alone and attached to threaded rod) Existing Threaded Rod Bracket Kit (FGS-HETR-F-XX) 216 mm (8.5") 216 mm (8.5") 305 mm (12") 254 mm (10") 381 mm (15") 12" Trough 203 mm (8") 152 mm (6") 381 mm (15") 12" Trough Top Support Threaded Rod C-Bracket Kit (FGS-HNTS-F-XX shown attached to 4x12 straight section) Top Support Low Profile Threaded Rod C-Bracket Kit (FGS-HNTS-F-XX-LP shown attached to 4x12 straight section) uide 12" FiberGuide nting 115 mm (4.5") T-Bolt Assembly Threaded Rod Lock Washer 286 mm (11.25") Mounting Nut 115 mm (4.5") T-Bolt Assembly Threaded CapRod 63.5 mm (2.5") Center Support Threaded Rod Bracket Kit (FGS-HTUB-F-XX shown attached to 4x12 straight section) Thread Cap 61 mm (2.4") 63.5 mm (2.5") 286 mm (11.25") Ladder Rack Center Support Bracket (FGS-HNLR-F) 10 mm (.4") 38 mm (1.5") Support Kits 406 mm (16") 457 mm (18") 51 mm (2") Trapeze Bracket Kit (FGS-HNTP-F) 91 www.te.com/adc 1-800-366-3891 x73000 Fax: 1-952-917-3237 4/12 104892AE

4x24 System Support Kits 4x24 System...94 Support Kits 93 www.te.com/adc 1-800-366-3891 x73000 Fax: 1-952-917-3237 4/12 104892AE

4x24 System Support Kits Variable Fitting Support Locator Kit Horizontal Elbow (FGS-MH4E-H-VS) Variable Fitting Support Locater Kit Horizontal T with Single 12" Exit (FGS-MHRT-H/F-VS) Variable Support Bracket - Horiz. Elbow (FGS-MH4E-H-VS) Variable Support Bracket - Horiz. T (FGS-MHRT-H/F-VS) Variable Fitting Support Locater Kit Horizontal Cross (FGS-MHXP-H-VS) Variable Fitting Support Locater Kit Horizontal Cross with Dual 12" Exits (FGS-MHXP-F/H-VS) 12.7 mm Variable (.5") Support Bracket - Horiz. Cross (FGS-MHXP-H-VS) Quick Knob 844.6 mm (33.25") 736.6 mm (29") Threaded Rod Ref Split Nut Bracket Clip Existing Threaded Rod Trapeze Bracket Existing 5/8 Threaded Rod Trapeze Bracket Kit (FGS- HETP-H-5/8) 50.8 mm (2") Variable Support Bracket - Horiz. Cross (FGS-MHXP-F/H-VS) 793.8 mm (31.25") 736.6 mm (29") New 5/8 Threaded Rod Trapeze Bracket Kit (FGS-HNTP-H-5/8) 50.8 mm (2") Support Kits ORDERING Existing INFORMATION 5/8 Threaded Rod Trapeze Bracket Kit (FGS- HETP-H-5/8) Description 4x24 System Support Kits Variable fitting support locater kit for; Horizontal elbow Horizontal T with single 12" exit Horizontal cross Horizontal cross with dual 12" exits Threaded rod trapeze bracket kit for; Existing; 5/8" New; 5/8" New 5/8 Threaded Rod Trapeze Bracket Kit (FGS-HNTP-H-5/8) Part Number FGS-MH4E-H-VS FGS-MHRT-H/F-VS FGS-MHXP-H-VS FGS-MHXP-F/H-VS FGS-HETP-H-5/8 FGS-HNTP-H-5/8 94 www.te.com/adc 1-800-366-3891 x73000 Fax: 1-952-917-3237 4/12 104892AE

Accessories Support Kit Accessories... 96 System Accessories...97 Accessories 95 www.te.com/adc 1-800-366-3891 x73000 Fax: 1-952-917-3237 4/12 104892AE

Support Kit Accessories 2x2, 2x6, 4x4, 4x6, 4x12, 4x24 Support Kit Accessories Threaded Rod (FGS-HTHR) Auxiliary Framing Kit (FGS-HFCK) Adjustable Angle Support Brackets (FGS-HASB) Ladder Rack Bracket Kit FGS-HLDR shown alone and attached to ladder rack Unistrut Nut Kit (FGS-HDGR) ORDERING INFORMATION Accessories Description Threaded rod Part Number 5/8" - 11 x 12" FGS-HTHR-5/8-12 5/8" - 11 x 30" FGS-HTHR-5/8-30 5/8" - 11 x 72" FGS-HTHR-5/8-72 1/2" - 13 x 12" FGS-HTHR-1/2-12 1/2" - 13 x 30" FGS-HTHR-1/2-30 1/2" - 13 x 72" FGS-HTHR-1/2-72 Threaded rod; (XX = size: 12 mm, 14 mm, 16 mm) (NN = length: 30 cm, 75 cm, 180 cm) Auxiliary framing kit 2x 9/16" x 3/16" for 5/8" rod 2x 9/16" x 3/16" for 1/2" rod Adjustable angle support brackets with 5/8" threaded rod FGS-HTHR-XX-NN FGS-HFCK-5/8 FGS-HFCK-1/2 11 x 36" rod FGS-HASB-5/8-36 11 x 48" rod FGS-HASB-5/8-48 Adjustable angle support brackets with 1/2" threaded rod 13 x 36" rod FGS-HASB-1/2-36 13 x 48" rod FGS-HASB-1/2-48 Ladder rack bracket kit for radiused ladder racking Ladder rack bracket kit; (XX = size: 1/2", 5/8", 12 mm, 14 mm, 16 mm) Unistrut nut kit; 5/8" Frame mounting hardware kit; (XX = size: 1/2", 5/8", 12 mm, 14 mm, 16 mm) FGS-HLDR-A FGS-HLDR-XX FGS-HDGR FGS-HKFM-XX 96 www.te.com/adc 1-800-366-3891 x73000 Fax: 1-952-917-3237 4/12 104892AE

System Accessories 2" Outer Diameter Slotted Flex Tube (FGS-MIDY) 7/8" Outer Diameter Slotted Flex Tube (FGS-MFTY) Single Hinges for 4" and 6" Covers (FGS-HHGK) Retainer Rings (FGS-HFRR-10) Flex Tube Clamp (FGS-HHEC-10) Storage Spools (FGS-MSTOR-A/B/F) Shown Installed (FGS-MSTOR-A/B/F) Mitre Box and Saw (FGS-MKIT-ABF) Retrofit Fin Kit of 10 (FGS-MFIN-10) Quick Knobs - Kit of 10 (FGS-KQKB) Accessories 97 www.te.com/adc 1-800-366-3891 x73000 Fax: 1-952-917-3237 4/12 104892AE

System Accessories ORDERING INFORMATION Description Part Number Yellow System Black System Trough cover clip kit FGS-KT09 FGS-KT09 Slotted and solid flex tubes (X = length: 5, 10, 15, 20, 25, 50, 75, 100, 125, 150, 200, 250) FGS-MIDY-XF FGSB-MIDY-XF (X = length: 5, 10, 15, 20, 25, 50, 75, 100, 125, 150, 200, 250) FGS-MLDY-XF FGSB-MLDY-XF (X = length: 5, 10, 15, 20, 25, 50, 75, 100, 125, 150, 200, 250) FGS-MFTY-XF FGSB-MFTY-XF (X = length: 5, 10, 15, 20, 25, 50, 75, 100, 125, 150, 200, 250) FGS-MISY-XF FGSB-MISY-XF Hinges; single hinges for 4x4 and 4x6 covers FGS-HHGK FGS-HHGK Retainer rings; kit of 10 used to retain fibers in 2" flex tube FGS-HFRR-10 FGS-HFRR-10 Flex tube clamp; kit of 10 used to secure 2" flex tube to 2" vertical ducts FGS-HHEC-10 FGS-HHEC-10 Storage spools for dark fiber jumpers; kit of 2 FGS-MSTOR-A/B/F FGS-MSTOR-A/B/F Mitre box with saw Used to cut 2x2, 4x4, 4x6, and 4x12 FiberGuide straight sections to size sed to cut 2x2, 4x4, and 4x6 FiberGuide straight sections to size IFC tie down for; FGS-MKIT-ABF FGS-MKIT FGS-MKIT-ABF FGS-MKIT 4x4 system FGS-HIFC-A FGS-HIFC-A 4x6 system FGS-HIFC-B FGS-HIFC-B 4x12 system FGS-HIFC-F FGS-HIFC-F Quick knobs with T-bolt and cover slip; kit of 10 FGS-KQKB FGS-KQKB Reverse junction adapter kit for 4x4, 4x6, and 4x12 systems; used to connect two parts rotated 180 FGS-HRJA-A/B/F FGS-HRJA-A/B/F Retrofit fin; kit of 10 FGS-MFIN-10 FGS-MFIN-10 Other nonstandard colors available by request. Accessories 98 www.te.com/adc 1-800-366-3891 x73000 Fax: 1-952-917-3237 4/12 104892AE

Index F FGS-ACC063...71 FGS-ASRI-5F...34, 44 FGS-ASRI-10F...34, 44 FGS-ASRI-15F...34, 44 FGSB-ACC063...71 FGSB-ASRI-5F...34, 44 FGSB-ASRI-10F...34, 44 FGSB-ASRI-15F...34, 44 FGSB-DHHC...36, 46, 54 FGSB-HMEC-C...20 FGSB-ISLAND3-F...52 FGSB-ISLAND-F...52 FGSB-ISLAND-F-513...52 FGSB-ISLAND-H/F...61 FGSB-JUNC-G... 28 FGSB-KDH2-C...21 FGSB-KT03-A...34, 44 FGSB-KT03-A1...34, 44 FGSB-KT03-A1-10F...34, 44 FGSB-KT03-A1-15F...34, 44 FGSB-KT03-A4-5F...34, 44 FGSB-KT03-A4-10F...34, 44 FGSB-KT03-A4-15F...34, 44 FGSB-KT03-A10F...34, 44 FGSB-KT03-A15F...34, 44 FGSB-KT03-B...52 FGSB-KT03-B-10F...52 FGSB-KT03-B-15F...52 FGSB-KT03-C...21, 67 FGSB-KT03-C-10F...21, 67 FGSB-KT03-C-15F...21, 67 FGSB-KT03-G-5F... 26 FGSB-KT07-A4-5F...34, 44 FGSB-KT07-A4-10F...34, 44 FGSB-KT07-A4-15F...34, 44 FGSB-KTW1-E...71 FGSB-KTW1-JA...71 FGSB-KTW1-JB...71 FGSB-KTW1-JN...71 FGSB-KTW2-J...71 FGSB-KTW2-JN...71 FGSB-KTW2-K...71 FGSB-KTW2-R...71 FGSB-KTW2-RN...71 FGSB-KTW2-T...71 FGSB-KTW2-TN...71 FGSB-KTW4-E...71 FGSB-MCDS-AB...34, 44 FGSB-MCDS-EX-AB...34, 44 FGSB-MD4A-C...20 FGSB-MD4E-A...32 FGSB-MD4E-B... 42 FGSB-MD4E-F...50 FGSB-MD4E-G... 26 FGSB-MD4E-H...60 FGSB-MD9A-C...20 FGSB-MD9E-A...32 FGSB-MD9E-B... 42 FGSB-MD9E-F...50 FGSB-MD9E-G... 26 FGSB-MDRT-F...52 FGSB-MDSA-AB...32, 42 FGSB-MDSA-AC...20 FGSB-MDSA-F2B...50 FGSB-MDSA-FB...42, 50 FGSB-MDSA-GA... 26 FGSB-MDSA-GB... 26 FGSB-MDSA-HF...60 FGSB-MDSP-2B...44 FGSB-MDSP-2B-IMP...44 FGSB-MDSP-A... 34 FGSB-MDSP-A/I... 34 FGSB-MDSP-B...44 FGSB-MDSP-B/I...44 FGSB-MDSP-C...21 FGSB-MDSP-EX-A... 34 FGSB-MDSP-EX-B...44 FGSB-MDSP-F...52 FGSB-MDSP-F/I...52 FGSB-MDSP-G... 26 FGSB-MEX1-C-5F...21, 67 FGSB-MEX1-C-10F...21, 67 FGSB-MEX1-C-15F...21, 67 FGSB-MEXC-E-A...66 FGSB-MEXC-E-A/B/F...66 FGSB-MEXC-E-B...66 FGSB-MEXC-E-F...66 FGSB-MEXP-A/B/F... 67 FGSB-MEXP-E-A/B/F...66 FGSB-MEXP-LP-A/B/F... 67 FGSB-MEXP-LP-G... 26 FGSB-MFAW-A... 36 FGSB-MFAW-B...46 FGSB-MFAW-F... 55 FGSB-MFAW-H... 62 FGSB-MFTY-XF... 98 FGSB-MH4A-C...20 FGSB-MH4E-A...32 FGSB-MH4E-B... 42 FGSB-MH4E-F...50 FGSB-MH4E-G... 26 FGSB-MH4E-H...60 FGSB-MH9A-C...20 FGSB-MH9A-C-45/2...20 FGSB-MH9E-A...32 FGSB-MH9E-B... 42 FGSB-MH9E-F...50 FGSB-MH9E-G... 26 FGSB-MHIS-A... 32, 42, 50 FGSB-MHIS-A/H...60 FGSB-MHIS-B... 32, 42, 50 FGSB-MHIS-B/H...60 FGSB-MHIS-F... 32, 42, 50 FGSB-MHIS-F/H...60 FGSB-MHRT-A...32 FGSB-MHRT-B... 42 FGSB-MHRT-F...50 FGSB-MHRT-F/B...50 FGSB-MHRT-G... 26 FGSB-MHRT-H...60 FGSB-MHRT-H/F...60 FGSB-MHTA-C...20 FGSB-MHXP-A...32 FGSB-MHXP-B... 42 FGSB-MHXP-B/F...50 FGSB-MHXP-C...20 FGSB-MHXP-F...50 FGSB-MHXP-F/H...60 FGSB-MHXP-G... 26 FGSB-MHXP-H...60 FGSB-MIDY-XF... 98 FGSB-MISY-XF... 98 FGSB-MJWR-A...34, 44 FGSB-MJWR-C...22 FGSB-MJWR-D...73 FGSB-MJWRM-C...72 FGSB-MLDY-XF... 98 FGSB-MSDS-C...21 FGSB-MSHA-C...22 FGSB-MSHC-J...71 FGSB-MSHC-K...71 FGSB-MSHS-A... 36 FGSB-MSHS-B...46 FGSB-MSHS-CB...71 FGSB-MSHS-F... 54 FGSB-MSHS-G... 28 FGSB-MSHS-H... 62 FGSB-MSHS-K...71 FGSB-MSHS-KF...71 FGSB-MSHS-KN...71 FGSB-MSHS-KS...71 FGSB-MSHS-KT...71 FGSB-MSHS-STOR-B...46 FGSB-MSHS-STOR-F... 54 FGSB-MSNC-A... 36 FGSB-MSNC-B/G... 28, 46 FGSB-MSNC-F... 54 FGSB-MSSC-A... 36 FGSB-MSSC-B/G... 28, 46 FGSB-MSSC-F... 54 FGSB-MTRM-2B...44 FGSB-MTRM-2B-IMP...44 FGSB-MTRM-A...34, 44 FGSB-MTRM-B...52 FGSB-MTRM-C...21, 67 FGSB-MTRM-D...71 FGSB-MTRM-DS...71 FGSB-MTRM-F...52 FGSB-MTRM-G... 26 FGSB-MU4A-C...20 FGSB-MU4E-A...32 FGSB-MU4E-B... 42 FGSB-MU4E-F...50 FGSB-MU4E-G... 26 FGSB-MU4E-H...60 FGSB-MU9A-C...20 FGSB-MU9E-A...32 FGSB-MU9E-B... 42 FGSB-MVAR-A...32, 36 FGSB-MVAR-B...42, 46 FGSB-MVAR-F...50, 54 FGSB-SD4E-A...32 FGSB-SD4E-B... 42 FGSB-SD4E-F...50 FGSB-SD9E-A...32 FGSB-SD9E-B... 42 FGSB-SD9E-F...50 FGSB-SDSA-AB...32, 42 99 www.te.com/adc 1-800-366-3891 x73000 Fax: 1-952-917-3237 4/12 104892AE

Index FGSB-SDSA-F2B...50 FGSB-SDSA-FB...42, 50 FGSB-SDSP-F...52 FGSB-SH4E-A...32 FGSB-SH4E-B... 42 FGSB-SH4E-F...50 FGSB-SH9E-A...32 FGSB-SH9E-B... 42 FGSB-SH9E-F...50 FGSB-SHRT-A...32 FGSB-SHRT-B... 42 FGSB-SHRT-F...50 FGSB-SHRT-F/B...50 FGSB-SHXP-A...32 FGSB-SHXP-B... 42 FGSB-SHXP-B/F...50 FGSB-SHXP-F...50 FGSB-SU4E-A...32 FGSB-SU4E-B... 42 FGSB-SU4E-F...50 FGSB-SU9E-A...32 FGS-BTBL-C... 82 FGS-BTBS-C... 82 FGSB-TRMP42...71 FGSB-TRMP44...71 FGSB-V9E44...71 FGS-CD4E-A...32 FGS-CD4E-B... 42 FGS-CD9E-A...32 FGS-CD9E-B... 42 FGS-CDSA-AB...32, 42 FGS-CH4E-A...32 FGS-CH4E-B... 42 FGS-CH9E-A...32 FGS-CH9E-B... 42 FGS-CHRT-A...32 FGS-CHRT-B... 42 FGS-CHXP-A...32 FGS-CHXP-B... 42 FGS-CU4E-B... 42 FGS-CU9E-B... 42 FGS-DHCP... 28, 36, 46, 54 FGS-DHHC...36, 46, 54 FGS-FD4E-H... 62 FGS-FDSA-HF... 62 FGS-FH4E-H... 62 FGS-FHRT-H... 62 FGS-FHRT-H/F... 62 FGS-FHXP-F/H... 62 FGS-FHXP-H... 62 FGS-FSFC-H... 62 FGS-HAEJ-C... 83 FGS-HASB-1/2-36...96 FGS-HASB-1/2-48...96 FGS-HASB-5/8-36...96 FGS-HASB-5/8-48...96 FGS-HASK-C... 83 FGS-HCBL-12... 86 FGS-HCBL-15... 86 FGS-HDCB-C... 82 FGS-HDGR...96 FGS-HDLB-3... 86 FGS-HDSI-AB...34, 44 FGS-HDSI-F/C...52 FGS-HDSI-F/D...52 FGS-HETP-F-XX...90 FGS-HETP-H-5/8...94 FGS-HETR-5/8-A... 86 FGS-HETR-F-XX...90 FGS-HETR-XX... 86 FGS-HFCK-1/2...96 FGS-HFCK-5/8...96 FGS-HFRR-10... 98 FGS-HHEC-10... 98 FGS-HHGK... 98 FGS-HIFC-A... 98 FGS-HIFC-B... 98 FGS-HIFC-F... 98 FGS-HKFM-XX...96 FGS-HKW2-E...73 FGS-HLBK... 86 FGS-HLDR-A...96 FGS-HLDR-XX...96 FGS-HLR2-C... 82 FGS-HMEC-A...32 FGS-HMEC-B... 42 FGS-HMEC-C...20 FGS-HMEC-E...73 FGS-HMEC-F...50 FGS-HMEC-G... 26 FGS-HMEC-H...60 FGS-HNLR-AB... 86 FGS-HNLR-F...90 FGS-HNTP-F-XX...90 FGS-HNTP-H-5/8...94 FGS-HNTR-5/8-A... 86 FGS-HNTR-F-XX...90 FGS-HNTR-XX... 86 FGS-HNTS-F-XX...90 FGS-HNTS-F-XX-LP...90 FGS-HNTS-XX... 86 FGS-HNTS-XX-LP... 86 FGS-HOMX-16MM... 86 FGS-HRJA-A/B/F... 98 FGS-HSHC-10...21 FGS-HTHR-1/2-12...96 FGS-HTHR-1/2-30...96 FGS-HTHR-1/2-72...96 FGS-HTHR-5/8-12...96 FGS-HTHR-5/8-30...96 FGS-HTHR-5/8-72...96 FGS-HTHR-XX-NN...96 FGS-HTR2-1/2... 83 FGS-HTR2-2-5/8... 83 FGS-HTR2-5/8... 83 FGS-HTUB-F-XX...90 FGS-HTUB-XX... 86 FGS-HUFB-A... 86 FGS-HUFB-C... 82 FGS-HWMB-C...72 FGS-HWMB-D...73 FGS-ISLAND3-F...52 FGS-ISLAND-F...52 FGS-ISLAND-F-513...52 FGS-ISLAND-H/F...61 FGS-JUNC-G... 28 FGS-KDH2-C...21 FGS-KQKB... 98 FGS-KT03-A...34, 44 FGS-KT03-A1...34, 44 FGS-KT03-A1-10F...34, 44 FGS-KT03-A1-15F...34, 44 FGS-KT03-A4-5F...34, 44 FGS-KT03-A4-10F...34, 44 FGS-KT03-A4-15F...34, 44 FGS-KT03-A10F...34, 44 FGS-KT03-A15F...34, 44 FGS-KT03-B...52 FGS-KT03-B-10F...52 FGS-KT03-B-15F...52 FGS-KT03-C...21, 67 FGS-KT03-C-10F...21, 67 FGS-KT03-C-15F...21, 67 FGS-KT03-G-5F... 26 FGS-KT07-A4-5F...34, 44 FGS-KT07-A4-10F...34, 44 FGS-KT07-A4-15F...34, 44 FGS-KT09... 98 FGS-KTW1-E...71 FGS-KTW1-JA...71 FGS-KTW1-JB...71 FGS-KTW1-JN...71 FGS-KTW2-J...71 FGS-KTW2-JN...71 FGS-KTW2-K...71 FGS-KTW2-R...71 FGS-KTW2-RN...71 FGS-KTW2-T...71 FGS-KTW2-TN...71 FGS-KTW4-E...71 FGS-MCDS-AB... 34 FGS-MCDS-AB**...44 FGS-MCDS-EX-AB...34, 44 FGS-MD4A-C...20 FGS-MD4E-A...32 FGS-MD4E-B... 42 FGS-MD4E-F...50 FGS-MD4E-G... 26 FGS-MD4E-H...60 FGS-MD9A-C...20 FGS-MD9E-A...32 FGS-MD9E-B... 42 FGS-MD9E-F...50 FGS-MD9E-G... 26 FGS-MDRT-F...52 FGS-MDSA-AB...32, 42 FGS-MDSA-AC...20 FGS-MDSA-F2B...50 FGS-MDSA-FB...42, 50 FGS-MDSA-FB-L...50 FGS-MDSA-FB-R...50 FGS-MDSA-GA... 26 FGS-MDSA-GB... 26 FGS-MDSA-HF...60 FGS-MDSP-2B...44 FGS-MDSP-2B-IMP...44 100 www.te.com/adc 1-800-366-3891 x73000 Fax: 1-952-917-3237 4/12 104892AE

Index FGS-MDSP-A... 34 FGS-MDSP-A/I... 34 FGS-MDSP-B...44 FGS-MDSP-B/I...44 FGS-MDSP-C...21 FGS-MDSP-EX-A... 34 FGS-MDSP-EX-B...44 FGS-MDSP-F...52 FGS-MDSP-F/I...52 FGS-MDSP-F-VS...50 FGS-MDSP-G... 26 FGS-MEX1-C-5F...21, 67 FGS-MEX1-C-10F...21, 67 FGS-MEX1-C-15F...21, 67 FGS-MEXC-E-A...66 FGS-MEXC-E-A/B/F...66 FGS-MEXC-E-B...66 FGS-MEXC-E-F...66 FGS-MEXP-A/B/F... 67 FGS-MEXP-E-A/B/F...66 FGS-MEXP-LP-A/B/F... 67 FGS-MEXP-LP-G... 26 FGS-MFAW-A... 36 FGS-MFAW-B...46 FGS-MFAW-F... 55 FGS-MFAW-H... 62 FGS-MFIN-10... 98 FGS-MFTY-XF... 98 FGS-MH4A-C...20 FGS-MH4E-A...32 FGS-MH4E-B... 42 FGS-MH4E-F...50 FGS-MH4E-G... 26 FGS-MH4E-H...60 FGS-MH4E-H-VS...94 FGS-MH9A-C...20 FGS-MH9A-C-45/2...20 FGS-MH9E-A...32 FGS-MH9E-B... 42 FGS-MH9E-F...50 FGS-MH9E-F-VS...50 FGS-MH9E-G... 26 FGS-MHIS-A... 32, 42, 50 FGS-MHIS-A/H...60 FGS-MHIS-B... 32, 42, 50 FGS-MHIS-B/H...60 FGS-MHIS-F... 32, 42, 50 FGS-MHIS-F/H...60 FGS-MHIS-JIG-A/B/F... 32, 42, 50 FGS-MHRT-A...32 FGS-MHRT-B... 42 FGS-MHRT-F...50 FGS-MHRT-F/B...50 FGS-MHRT-F/B-VS...50 FGS-MHRT-F-VS...50 FGS-MHRT-G... 26 FGS-MHRT-H...60 FGS-MHRT-H/F...60 FGS-MHRT-H/F-VS...94 FGS-MHTA-C...20 FGS-MHXP-A...32 FGS-MHXP-B... 42 FGS-MHXP-B/F...50 FGS-MHXP-B/F-VS...50 FGS-MHXP-C...20 FGS-MHXP-F...50 FGS-MHXP-F/H...60 FGS-MHXP-F/H-VS...94 FGS-MHXP-F-VS...50 FGS-MHXP-G... 26 FGS-MHXP-H...60 FGS-MHXP-H-VS...94 FGS-MIDY-XF... 98 FGS-MISY-XF... 98 FGS-MJWR-A...34, 44 FGS-MJWR-C...22 FGS-MJWR-D...73 FGS-MJWRM-C...72 FGS-MKIT... 98 FGS-MKIT-ABF... 98 FGS-MLDY-XF... 98 FGS-MSDS-C...21 FGS-MSHA-C...22 FGS-MSHC-J...71 FGS-MSHC-K...71 FGS-MSHS-A... 36 FGS-MSHS-B...46 FGS-MSHS-CB...71 FGS-MSHS-F... 54 FGS-MSHS-G... 28 FGS-MSHS-H... 62 FGS-MSHS-K...71 FGS-MSHS-KF...71 FGS-MSHS-KN...71 FGS-MSHS-KS...71 FGS-MSHS-KT...71 FGS-MSHS-STOR-B...46 FGS-MSHS-STOR-F... 54 FGS-MSNC-A... 36 FGS-MSNC-B/G... 28, 46 FGS-MSNC-F... 54 FGS-MSSC-A... 36 FGS-MSSC-B/G... 28, 46 FGS-MSSC-F... 54 FGS-MSTOR-A/B/F... 98 FGS-MTRM-2B...44 FGS-MTRM-2B-IMP...44 FGS-MTRM-A...34, 44 FGS-MTRM-B...52 FGS-MTRM-C...21, 67 FGS-MTRM-D...71 FGS-MTRM-DS...71 FGS-MTRM-F...52 FGS-MTRM-G... 26 FGS-MTRM-H...61 FGS-MU4A-C...20 FGS-MU4E-A...32 FGS-MU4E-B... 42 FGS-MU4E-F...50 FGS-MU4E-G... 26 FGS-MU4E-H...60 FGS-MU9A-C...20 FGS-MU9E-A...32 FGS-MU9E-B... 42 FGS-MVAR-A...32, 36 FGS-MVAR-B...42, 46 FGS-MVAR-F...50, 54 FGS-SD4E-A...32 FGS-SD4E-B... 42 FGS-SD4E-F...50 FGS-SD9E-A...32 FGS-SD9E-B... 42 FGS-SD9E-F...50 FGS-SDSA-AB...32, 42 FGS-SDSA-F2B...50 FGS-SDSA-FB...42, 50 FGS-SDSP-F...52 FGS-SH4E-A...32 FGS-SH4E-B... 42 FGS-SH4E-F...50 FGS-SH9E-A...32 FGS-SH9E-B... 42 FGS-SH9E-F...50 FGS-SHRT-A...32 FGS-SHRT-B... 42 FGS-SHRT-F...50 FGS-SHRT-F/B...50 FGS-SHXP-A...32 FGS-SHXP-B... 42 FGS-SHXP-B/F...50 FGS-SHXP-F...50 FGS-SU4E-A...32 FGS-SU4E-B... 42 FGS-SU4E-F...50 FGS-SU9E-A...32 FGS-TRMP42...71 FGS-TRMP44...71 FGS-V9E44...71 FGS-VDSA-FB-L...50 FGS-VDSA-FB-R...50 FGS-VQE22...71 FGS-VQE44...71 R RGS-RA001-B... 79 RGS-RC001-B... 79 RGS-RC002-B... 79 RGS-RC003-B... 79 RGS-RC004-B... 79 RGS-RC005-B... 79 RGS-RC006-B... 79 RGS-SC001-B... 79 RGS-SC001-B8... 79 RGS-SC002-B... 79 RGS-SC003-B... 79 RGS-TC001-B... 79 RGS-V0BX0A-P... 79 RGS-V0BX0B-P... 79 RGS-V0CX0A-P... 79 RGS-V0CX0B-P... 79 RGS-VC001-B... 79 RGS-VC002-B... 79 RGS-VC003-B... 79 RGS-VRACC-CRKITB... 79 RGS-VRACC-CRKITP... 79 101 www.te.com/adc 1-800-366-3891 x73000 Fax: 1-952-917-3237 4/12 104892AE

CATALOG Contact us: P.O. Box 1101 Minneapolis, Minnesota USA 55440-1101 Tel: 1-800-366-3891 x73000 1-952-917-3000 Fax: 1-952-917-3237 www.te.com/adc www.us.telecomosp.com Tyco Electronics and ADC are now TE Connectivity TE Connectivity, TE connectivity (logo), Tyco Electronics, TE (logo), ADC, Express Exit, FiberGuide, NG3, Snap-Fit and TracerLight are trademarks of the TE Connectivity Ltd. family of companies and its licensors. While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this document, TE Connectivity does not guarantee that it is error-free, nor does TE Connectivity make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE Connectivity reserves the right to make any adjustments to the information contained herein at any time without notice. TE Connectivity expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE Connectivity for the latest dimensions and design specifications. Tyco Electronics Corporation, a TE Connectivity Ltd. Company. All Rights Reserved. 104892AE 4/12 Original 2012