Tecan MiniPrep Robots Automated Sample Processors On a Scientific Scale

Tecan MiniPrep Robots Automated Sample Processors On a Scientific Scale

A helping hand Research laboratories worldwide are accelerating the pace of discovery. Scientists face the practical challenges of handling more samples, at smaller volumes, with increased need for reproducibility in order to obtain optimal experimental performance. MiniPrep Sample Processors Tecan's MiniPrep sample preparation robots offer automation solutions for the research laboratory, where consistent results are vital and bench space is limited. The MiniPrep is designed to take on the challenges of reproducible pipetting and dispensing of volumes including sub-microliter. It also handles a variety of sample containers including troughs, tubes, and 96 or 384-well microtiter plates. Multi Functional The MiniPrep can be equipped to perform repetitive laboratory procedures in a wide range of application areas: Nucleic Acid Extraction and Purification - Solid Phase Extraction (SPE), or - Magnetic Bead Separation (MBS) Mother-Daughter Plate Replication ELISA Assays Immunophenotyping LC Injection Cell-Based Assays and Separations Protein Assays Compact, Economical Two basic deck sizes are available that optimize space/capacity considerations for your application. The MiniPrep 60 deck holds up to 6 microtiter plates, while the MiniPrep 75 can accommodate up to 12 plates. In addition, the MiniPrep 75 can be equipped with two pipetting arms, each having different functionality. On-board Te-MagS Magnetic Bead Separator HPLC Chromatogram Magnetic Beads Suspension Magnetized Bead Pellet DNA Electropherogram

A Multitude of Tools Modularity is one of the keys to MiniPrep's value. The following options allow us to configure the optimal system for your applications. Cavro XL 3000 Programmable Syringe Pumps Provide superb liquid handling performance Available in standard or high resolution models and as 8-channel model Disposable Tips Minimizes the possibility of cross contamination MiniWash Pump and Dual Lumen Tips Create an effective plate washing system HPLC Injection Valve Module Provides the ability to inject samples directly into analytical instruments Te-MagS MBS Module For magnetic bead separation applications, in 48 or 96 well formats Te-VacS SPE Module For solid phase extraction applications in molecular biology or analytical chemistry, including DNA purification 8-channel Probe Increases liquid handling throughput for multiwell plate applications Peristaltic Pump For controlled constant volume fluid transfer I/O Board Communicates with external devices Smart Distribution Valves Customizes your fluidic system On-board Te-VacS SPE module On-board HPLC Injection Valve On-board Disposable Tips

Powerful Software Gemini software for MiniPrep runs under Windows 2000 and XP. Gemini meets your challenge by combining the flexibility for your method development and optimization with easy-to-use dedicated application scripts. Tecan has developed a unique tool to help the scientist master the art of liquid handling. The Liquid Class database helps manage the multitude of parameters that contribute to the accurate and precise dispensing of fluids with different physical characteristics. The MiniPrep comes with example liquid classes so you can start working immediately. 8-channel Manifold Wide Variety of Probes

Tecan MiniPrep Specifications MiniPrep Specifications MiniPrep 60 MiniPrep 75 Pipetting Arms 1 1 or 2 Microplate Capacity Deck 6 12 Dimensions Footprint: (W) 559 mm (22") x (D) 615 mm (24.2") (W) 815 mm (32.1") x (D) 600 mm (23.6") x (H) 515 mm (20.3") x (H) 515 mm (20.3") (H does not include Z-rack) (H does not include Z-rack) Probe Travel Range: (W) 390 mm (15.4") x (D) 300 mm (11.8") (W) 643 mm (25.3") x (D) 300 mm (11.8") x (H) 165 mm (6.5") x (H) 165 mm (6.5") Weight: ~30 kg (68 pounds) ~46 kg (100 pounds) Power Requirements Input Voltages: Auto-selecting 110/230 VAC +/- 10% Auto-selecting 110/230 VAC +/- 10% Frequency: 47-63 Hz 47-63 Hz Maximum Power 300 Watts 250 Watts 384 Well MTP Support Yes Diluter 1, 8 Channel Yes Disposable Tip Yes LC Injection Yes Liquid Handling Volume Range: 0.5 µl - 25.0 ml Syringe Sizes: 250 µl - 25.0 ml Accuracy: <1% @ full stroke with 1.0 ml syringe* Precision: <0.05% CV @ full stroke with 1.0 ml syringe* Minimal Detectable Volume: 50 µl of ionic fluid in a 96 well flat bottom standard microplate format. A minimum 1 mm of ionic liquid level height is necessary for reliable liquid detection. Control and Programming Standard Software: Gemini Software for MiniPrep Customer Supplied Host: Pentium Class (166 MHz or better) with Windows 2000 or XP Minimum 128 Mbytes RAM SVGA monitor with 1024 x 768 pixel resolution 100 Mbytes virtual memory One available serial interface for MiniPrep One available parallel interface Environmental Storage Temperature: 0-50 C (32-122 F) Operating Temperature: 15-40 C (59-104 F) Humidity (Non-Condensing): 30-85% RH Safety and Regulatory In compliance with applicable U.L., C.S.A. and CE standards *Accuracy and precision values determined using dilute salt solution (0.05 N NaCI). Liquid handling performance will differ depending on fluid type, tip type, tubing configuration and environmental conditions. Accuracy % = expected - observed x 100% expected Specifications are subject to change without notice.

Tecan Systems, Inc., 2450 Zanker Road, San Jose, CA 95131, USA, T +1 408 953 3100, F +1 408 953 3101 Tecan Asia (Pte) Ltd., 80, Marine Parade, #13-04, Singapore 449269, Singapore, T +65 644 41 886, F +65 644 41 836 Tecan Sales Austria GmbH, Untersbergstrasse 1a, A-5082 Grödig / Salzburg, Austria, T +43 62 46 89 33, F +43 62 46 72 770 Tecan Sales International GmbH, Untersbergstrasse 1a, A-5082 Grödig / Salzburg, Austria, T +43 62 46 89 33, F +43 62 46 72 770 Tecan Benelux B.V.B.A., Vaartdijk 55, B-2800 Mechelen, Belgium, T +32 15 42 13 19, F +32 15 42 16 12 Tecan Benelux B.V.B.A., Industrieweg 30, NL-4283 GZ Giessen, Netherlands, T +31 18 34 48 17 4, F +31 18 34 48 06 7 Tecan Deutschland GmbH, Theodor-Storm-Straße 17, D-74564 Crailsheim, Germany, T +49 79 51 94 170, F +49 79 51 50 38 Tecan France S.A., Parc d'activités de Pissaloup, Bâtiment Hermes II, Rue Edouard Branly, F-78190 Trappes, France, T +33 1 30 68 81 50, F +33 1 30 68 98 13 Tecan Italia S.r.l., Via F.lli Cervi, Palazzo Bernini, Centro Direzionale Milano 2, I-20090 Segrate (Mi), Italy, T +39 02 215 21 28, F +39 02 215 97 441 Tecan Japan Co. Ltd, Meiji Seimei Fuchu Building 10F, 1-40 Miyamachi, Fuchu City, Tokyo, Japan, T +81 42 334 88 55, F +81 42 334 04 01 Tecan Nordic AB, Box 208, SE-431 23 Mölndal, Sweden, T +46 31 75 44 000, F +46 31 75 44 010 Tecan Portugal, Quinta da Fonte - Edificio Pedro I, 2780-730 Paço d'arcos, Portugal, T +351 21 000 82 16, F +351 21 000 16 75 Tecan Sales Switzerland AG, Seestrasse 103, CH-8708 Männedorf, Switzerland, T +41 1 922 89 22, F +41 1 922 89 23 Tecan Spain, Sabino de Arana, 32, E-08028 Barcelona, Spain, T +34 93 490 01 74, F +34 93 411 24 07 Tecan UK, Theale Court, 11-13 High Street, Theale, UK-Reading RG7 5AH, United Kingdom, T +44 11 89 300 300, F +44 11 89 305 671 Tecan US, P.O. Box 13953, Research Triangle Park, NC 27709, USA, T +1 919 361 5200, F +1 919 361 5201 Cavro is a trademark of Tecan Systems. Windows is a trademark of Microsoft Corporation PN 731811-B Printed in the USA 7/03