KR25i HIGH SPEED, HIGH CAPACITY REFRIGERATED CENTRIFUGE AUTO-LOCK. CQCS Traceability System VIDEOset Display!

Transcription

1 KR25i HIGH SPEED, HIGH CAPACITY REFRIGERATED CENTRIFUGE AUTO-LOCK CQCS Traceability System VIDEOset Display!

2 A CENTRIFUGE FOR ALL YOUR HIGH SPEED APPLICATIONS CLINICAL BIOLOGY, RESEARCH, INDUSTRY The KR25i accepts all tubes from 1.5 ml to 500 ml for all types of high speed applications (up to 63,400 x g*) : Subcellular fractionation - Protein separation - Cell and virus recovery - Nucleic acid separation... Rotor exchange in 10 secondes AUTO-LOCK AUTO-LOCK makes the KR25i the first centrifuge in its class on which the rotors can be changed so easily, in absolute safety and in record time. Exchanging a 6 x 500 ml rotor for an 8 x 50 ml or a 4 x 100 ml (swing-out) is carried out in under 10 seconds! BENEFITS A choice of 9 angle and swing-out rotors : 32 x 16 ml, 8 x 50 ml conical, 8 x 50 ml, 14 x 50 ml, 8 x 100 ml, 6 x 250 ml, 6 x 500 ml, 4 x 100 ml (up to 63,400 x g). AUTO-LOCK : new rotor mounting system locks the rotor onto the drive for absolute security in centrifugation. Record rotor exchange time - under 10 seconds. VIDEOset graphic control system for instant understanding of operation. Lifetime guarantee of reproducibility from run-to-run with the High Reproducibility Factor (integral). Holds low temperature at high speed with its TFT system. AUTO-LOCK : Instant rotor exchange CQCStm traceability system for samples, centrifuge and operators. * KR25i with AKL50.22 (8 x 50 ml) rotor.

3 The KR25i complies fully with the most exacting international standards concerning safety in centrifugation : EN imbalance detection and shutdown, lid interlock,armour plating,automatic rotor detection, auto-diagnostics The KR25i is the first centrifuge in its category to be fitted with the AUTO-LOCK system : - For maximum security when mounting rotors with or without lid. - For rapid fitting and removal of rotors without the use of any tools. MAXIMUM SECURITY ABSOLUTE CONTROL Excellent maintenance of sample temperature and optimized heat exchange are assured by the patented TFT (Thin Film Technology) cooling systems with refrigerant fluid totally integrated within the wall and the bowl. With its pre-cool function (4 C/2000 rpm/15 min) the KR25i is always ready to keep the samples cool. Centrifugal acceleration (x g) Time duration Temperature compensation eliminates the usual differences between sample of bowl temperatures. For a higher quality of separation : Microprocessor control of all parameters. Allowance for sample radius to achieve true g force. Choice of 100 run profiles to match the sample needs (10 acceleration and 10 braking rates). Separation reproducibility guaranteed : High Reproducibility Factor ensures that the same total force is applied to the samples from run to run, whatever the rotor, load, fluctuating mains voltage ) Equivalent separations at different g

4 SIMPLICITY AND EASE OF USE EASY GRAPHIC USER INTERFACE The unique VIDEOset graphic control system is pleasant and easy to use. The user is guided intuitively and has no need of a manual. Set and actual run parameters can be displayed simultaneously thus assuring the user. A minimum of keys for a maximum of functions. Store the set of parameter values. Access to advanced parameters (radius programming, high reproducibility factor/ integral, temperature compensation). Start the run. Modify program parameter values. Create a set of parameter values..

5 UNEQUALLED CONVENIENCE Inclined flat screen and keyboard accessibly situated at the front of the centrifuge. Automatic lid opening assisted by gas springs and giving access to the front and both sides of the centrifuge. Minimum lab space and ideal working height (945 mm/37.2 in) for optimum sample handling. Induction motor is maintenance-free and exceptionally quiet (<60 dba*). * KR25i with rotor VIDEOset! Display

6 TRACEBILITY AND CENTRIFUGATION The IA-CQCS (Centrifugation Quality Control System) is designed to optimize and facilitate the traceability of the separation process during the centrifugation phase. Connection of 1 to 32 centrifuges, type KR4.22 or KR4i, all versions included. Simultaneous display and transfer to PC of all information relating to the runs (sample, centrifuge, operator and program identities, speed or RCF, time temperature, etc.) Automatic storage of run data on hard or floppy disk. Capture and exploitation of results by LIMS (laboratory information management systems). Printout of reports, including graphics at the end of the run. Search facility for previous runs (by date, sample number ) Ease of use - few keys and no hidden menus. Remote diagnostic function. Traceability of runs with curves of speed and temperature. Sample, operator and centrifuge traceability Supplementary information on AI-CQCS in brochure Cat N Sample traceability. Aid to maintenance. Centrifuge traceability. Operator traceability. TIME AND SPACE SAVING : ECONOMY AUTO-LOCK : Absolutely no tool needed for rotor locking and unlocking. The most compact centrifuge in its category: (H xw x D) 960 x 787 x 690 mm. A range of 8 high-speed rotors and more than 40 accessories give the widest choice of solutions for sample preparation.

7 ROTORS AND ACCESSORIES Catalogue Total Tube dim. Rad. Max Max Angle Rotor Description Capacity number volume mm mm speed RCF deg r.p.m x g AKL Angle rotor 32 x 16 ml 512 ml 18 x set of 8 adaptors 1 1 x 5 ml 160 ml 12 x set of 8 adaptors 1 1 x 1.5 ml 48 ml 11 x AKL 50C.17 Angle rotor 8 x 50 ml con. 400 ml 29.5 x set of 4 adaptors 1 x 10 ml 80 ml 16 x AKL Angle rotor 14 x 50 ml 700 ml 29 x AKL Angle rotor 8 x 50 ml 400 ml 29 x set of 8 adaptors 1 x 30/38 ml 304 ml 25.5 x / set of 8 adaptors 1 x 30 ml Corex 240 ml 24 x / set of 8 adaptors 1 x 25 ml Corex 200 ml 24 x / set of 8 adaptors 1 x 15 ml Corex 120 ml 18 x / set of 8 adaptors 1 x 13 ml 104 ml 17 x / set of 8 adaptors 1 x 10 ml 80 ml 16 x / set of 8 adaptors 3 x 1.5 ml 36 ml 11 x / AKL Angle rotor 8 x 100 ml 800 ml 38 x set of 4 adaptors 2 1 x 50 ml 400 ml 29 x set of 4 adaptors 2 1 x 50 ml con. 400 ml 30 x set of 4 adaptors 2 1 x 30/38 ml 304 ml 25.5 x set of 4 adaptors 2 1 x 15 ml con. 120 ml 17 x set of 4 adaptors 2 2 x 10 ml 160 ml 16 x set of 4 adaptors 2 4 x 1.5 ml 48 ml 11 x AKL Angle rotor 6 x 250 ml 1500 ml 61.7 x set of 6 adaptors 1 x 100 ml 600 ml 38 x set of 6 adaptors 1 x 50 ml con. 300 ml 30 x set of 6 adaptors 4 x 15 ml con. 360 ml 17 x AKL Angle rotor 6 x 500 ml 3000 ml 69.8 x set of 6 adaptors 1 x 250 ml 1500 ml 61.7 x set of 6 adaptors 3 x 50 ml 900 ml 29 x set of 6 adaptors 1 x 50 ml con. 300 ml 30 x set of 6 adaptors 7 x 16 ml 672 ml 18 x set of 6 adaptors 4 x 15 ml con. 360 ml 17 x SWK Swing-out rotor 4 x 100 ml 400 ml 38 x set of 4 adaptors 1 x 50 ml 200 ml 29 x set of 4 adaptors 1 x 30/38 ml 152 ml 25.5 x set of 4 adaptors 2 x 10 ml 80 ml 16 x set of 4 adaptors 4 x 1.5 ml 24 ml 11 x test tube rack 16 x 16 ml - 19 mm Ø test tube rack 8 x 50 ml - 30 mm Ø test tube rack 8 x 100 ml - 39 mm Ø Vice + adaptors 50,100, , 500 ml 1 - Rotor accepts 4 sets 2 - Rotor accepts 2 sets 3 - Max. Dims 4 - Inner row 5 - Outer row 6 - As rotor Note : Maximum performance may be limited by the tube performance as stated by the tube manufacturer.

8 SPECIFICATIONS Max speed : rpm Max RCF : x g Max capacity : 6 x 500 ml Microprocessor controlled : VIDEOset software Graphic screen 240 x 128 pixels Memory : 32 programs Program password protection Autotest function Monitoring system : CQCS Speed : Range to rpm Step 10 rpm Accuracy < ± 30 rpm RCF : Range 120 x g to x g Step 1 x g Accuracy < ± 20 x g at high speed Timer : Range 0 to 99 h 59 min + hold Step 1 min Accuracy < 1% Integrator : Range 100 to 999 x 10 9 m. rd 2 s -1 Step 1 m. rd 2 /s Acceleration : 10 Braking : 10 Temperature : Range (set) -8 C to +40 C at 20 C ambient temperature Step 1 C Accuracy ± 1.5 C Performance 4 C at rpm with 8 x 50 ml rotor Drive : Quick rotor exchange : Motor : Dimensions (H x L x D) : Packed (H x L x D) : Weight ( net/gross) : Average/maximum power : Noise level : VISIT US NOW AT INTERNET: FRANCE : JOUAN S.A. - 10, rue Duguay Trouin SAINT-HERBLAIN Cedex Tel +33 (0) Fax +33 (0) jouan@jouan.com - Internet: Direct drive AUTO-LOCK CATALOGUE NUMBERS 230 V - 50 Hz V - 60 Hz Comply with current directives U.S.A. : JOUAN Inc. - Tel (540) Toll Free (800) Fax (540) info@jouaninc.com GERMANY : JOUAN GmbH - Tel (089) Fax (089) info@jouan.de U.K. : JOUAN Ltd - Tel (0115) Fax (0115) jouan@enterprise.net ITALY : A.L.C. Int. Srl - Tel (02) Fax (02) jouan@jouanit.com RUSSIA : JOUAN Moscow - Fax/Tel (095) jouan.mp@g23.relcom.ru UKRAINE : JOUAN Kiev - Fax/Tel (044) jouan@biochem.kiev.ua Induction motor 960 x 787 x 690 mm x x 900 mm 242 / 300 kg / VA 62 dba at rpm uality ISO 9001 AFAQ N o 1995/3777a The quality of the product The quality of customer service The quality of the maintenance JOUAN continuously improves and develops its products.your equipment might therefore differ from its description as given in this leaflet. This document is not legally binding. 03/01 - Cat. N :