Update Segment page G5.indd 1 2/12/2010 7:21:26 AM

Update 2010.1 Seco Tools Industry Segment Solutions With extensive experience in a number of important segments, we are in a unique position to offer sensible and productive solutions to a wide variety of difficult machining applications. For our complete range of tooling, please see the Seco Machining Navigator catalog set. Aerospace Titanium, aluminum, high grade stainless steels and heat resistant superalloys are the traditional and still predominant materials in the aerospace industry. However, carbon fiber and other composite materials are becoming more popular. If you are machining an engine component case, ring, case, blade, etc., landing gear, or air frame member, we have specialized tools and techniques that can increase productivity and eliminate hassles such as long chips or unpredictable tool failure. Turning, milling, and holemaking tools have been adapted to the special needs of this industry. Wind Power Large components made from cast iron and hard steels require tools that feature long and consistent tool life. Typically large amounts of metal have to be removed and the final product has to be characterized by high precision. Additionally, many components feature dozens of bolt holes. Examples of successful tools designed for the wind power industry include Turbo Helical milling cutters that remove high volumes of metal fast. Our Duratomic insert coating offers increased wear resistance, speed capability and reliability. And high performance drilling, reaming and boring tools are available for almost any hole diameter. We have also successfully applied our PcBN tools to machine hard bearing races. Oil & Gas Components for this industry must be tough and durable to meet the rugged demands imposed by the abusive environments of arctic cold, desert heat, corrosive sea water and abrasive mud. Among other products, we offer the force reducing MR6 chip groove for long pipe and precision threading inserts developed specifically for the oil field. Unique PVD coatings for milling, turning and drilling inserts provide excellent tool life in difficult to machine materials. Automotive High production volumes and the drive to reduce part cost require productive tools and processes. We supply a very wide variety of tools to the automotive industry to machine everything from soft gray iron and aluminum to 60 Rc steel shafts and valve seats. We offer inserts, milling cutters, drills, reamers, as well as pre-setters and shrink fit machines for the heaviest interrupted cuts as well as high precision, tight tolerance machining. We also offer to every market segment our Component Engineered Tooling consultancy service where we recommend tooling, speeds, feeds and tool paths to machine an entire component in a cost efficient manner. Medical The small and complex components produced for the medical industry are typically made from difficult to machine materials like cobalt-chrome, titanium, stainless steels and even ceramics. The geometry of the cutting edge is a critical factor in producing stress-free, tight tolerance orthopedic parts. Our Jabro solid carbide end mill line includes products for high performance machining, high speed machining, and high feed machining and provides significant cost savings in a wide variety of parts from bone screws to tibial trays. Power Generation Whether we need to produce slots in turbine disks or the dove tails on blades, we have products that provide unique solutions no matter what the work material. We offer a wide variety of standard and custom tools for milling, turning, and holemaking. Innovation in products and services is important to us and we can offer advice concerning tooling set-up, project documentation and even training. 1 001 Segment page G5.indd 1 2/12/2010 7:21:26 AM

002-003 TOC.fm Page 2 Friday, February 12, 2010 10:10 AM Index Index Turning Index.................................... 2-3 Alphanumeric index - Inserts................. 4 Technical Information....................... 5-8 Seco Capto D-style - Toolholders, External....... 10-33 Inserts - Turning........................... 35-87 Technical Information, PCBN.................. 88 Inserts - Turning, PCBN...................... 89-119 MDT Technical Information and Cutting Data.......... 120-133 Toolholders, External........................ 134 Toolholders, Internal........................ 135 Jetstream Toolholders, External Face Machining... 136-144 Modular Toolholders, External................. 145-146 Modular Toolholders, Internal................. 147 Modular Blades............................ 148-152 Inserts, MDT.............................. 153-165 Threading Technical Information....................... 166 Toolholders, Internal HD S Style.............. 167-169 Toolholders, Internal HD API S Style.......... 170 Toolholders, Internal HD K Style.............. 171 Milling Face Milling Cutters, Double Octomill........... 173-174 Face Milling, Cutting Data and Inserts........... 175-176 Square Shoulder & Slot Cutters, Square 6....... 177 Square 6, Cutting Data and Inserts............. 178-181 Square Shoulder & Slot Cutters, Power Turbo.... 182-183 Square Shoulder Milling, Power Turbo Ramping... 184 Solid End Mills Technical Information....................... 185-186 Tool Selection............................. 187 Solid End Mills and Cutting Data............... 188-208 Holemaking Seco Feedmax, Technical Information.......... 209 SD245A, 5 x D............................. 210 SD265A, 5 x D............................. 211 Seco Feedmax, Cutting Data.................. 212 Seco Feedmax, Regrinding Instructions......... 213 Crownloc, Technical Information............... 214 SD103, 1.5 x D............................ 215 Crownloc, Crowns.......................... 216-218 Crownloc, Cutting data...................... 219-220 Perfomax, Technical Information............... 221 SD503, 3 x D.............................. 222-223 2

002-003 TOC.fm Page 3 Friday, February 12, 2010 10:10 AM Index SD504, 4 x D.............................. 224-225 Perfomax, Cutting Data...................... 226-228 Precimaster, Heads/Shanks................... 229-233 Precimaster, Geometry Choice................ 234 Precimaster, Cutting Data.................... 235 Xfix, Technical Information & Range Overview.... 236-240 Xfix, Inserts............................... 241 Xfix, Geometry Choice....................... 242 Xfix, Heads/Shanks......................... 243-254 Xfix, Adjusting Instructions................... 255 Xfix, Adjusting Adapter Instructions............ 256 Xfix, Setting Fixture......................... 257 Xfix, Cutting Data.......................... 258 EPB Tooling Systems Monobloc Holders, CAT..................... 259 Monobloc Holders, BT JIS................... 260 Dynamomentic Keys Keys and Replacement Blades................ 261 Maximum RPM and balancing Maximum RPM and Balancing Information...... 261 Insert Wear Failure Modes............................. 262-265 Workpiece Material Classification Seco Material Groups....................... 266 Classification and Machinability............... 267-272 Declaration of Conformity Delcaration of Conformity.................... 273-276 Please note: All new products are highlighted orange in the catalog pages. 3

Alphanumeric index Inserts 4 Type Page Type Page Turning Inserts C CCGT................................................. 35 CCGW................................................. 89 CCMT............................................... 36-37 CCMW................................................. 90 CDCB................................................. 38 CNGA.................................................. 91 CNGN................................................. 92 CNGP................................................. 38 CNMA.............................................. 39, 93 CNMG............................................... 39-41 CNMM.............................................. 41-43 CNMN................................................. 93 CNMP................................................. 43 CPMT................................................. 44 D DCGT................................................. 45 DCGW................................................. 94 DCMT................................................. 46 DCMW................................................. 95 DCMX................................................. 47 DNGA................................................. 96 DNGM................................................ 48 DNGN................................................. 97 DNGP................................................. 48 DNMA.............................................. 48, 97 DNMG.............................................. 48-50 DNMM................................................ 50 DNMN................................................. 98 DNMP................................................. 50 DNMU................................................. 51 DNMX................................................. 52 DPMT................................................. 53 L LCGA................................................ 156 LCGF......................................... 155, 161-162 LCGN............................................. 163-165 LCMF 13........................................... 153-154 LCMF 16........................................... 157-160 LCMF 3008......................................... 157-159 LCMR 13........................................... 153-154 LCMR 16........................................... 158-160 LCMR 3008......................................... 158-159 R RCGN................................................. 99 RCGS.............................................. 54, 99 RCMM................................................ 55 RCMT................................................. 55 RCMX................................................. 56 RNGN................................................ 100 RNMA................................................. 57 RNMG................................................ 57 RNMN................................................ 101 S SCGW................................................ 102 SCMN................................................ 102 SCMT................................................. 58 SNG................................................... 63 SNGA................................................. 103 SNGF................................................. 103 SNGN................................................ 104 SNMA............................................. 59, 105 SNMG.............................................. 59-60 SNMM.............................................. 61-62 SNMN................................................. 106 SNMP.................................................62 SNU...................................................63 SPG...................................................64 SPGW................................................. 107 SPMM.................................................. 63 SPMR.................................................64 SPU...................................................65 T TCGT..................................................66 TCGN.................................................107 TCGW................................................. 108 TCMT.................................................. 67 TCMW................................................. 109 TCMX.................................................. 68 TDAB..................................................69 TDCH.................................................. 69 TNG...................................................70 TNGA............................................. 110-111 TNGN............................................. 111-112 TNGX.................................................113 TNMA.................................................. 71 TNMG.............................................. 71-73 TNMM............................................... 73-74 TNMN................................................. 114 TNMP.................................................. 74 TNMX.............................................. 75, 115 TPG...................................................76 TPGA..................................................76 TPGN.................................................115 TPMM.................................................77 TPMR.................................................. 78 TPMT.................................................. 79 TPU...................................................76 V VBGT..................................................80 VBGW................................................. 116 VBMT.................................................. 80 VCGR.................................................. 81 VCGT..................................................81 VNGA.................................................117 VNGM.................................................82 VNGP.................................................. 82 VNMA................................................. 118 VNMG.............................................. 82-83 VNMP.................................................83 VNMU.................................................. 83 W WCMT.................................................84 WNGA............................................. 118-119 WNGP.................................................85 WNMA.............................................85, 119 WNMG.............................................. 85-86 WNMM................................................87 WNMP.................................................87 Milling Inserts ONMU................................................. 176 XNEX..................................................181 004 Inserts Index.fm Page 4 Thursday, February 11, 2010 12:20 PM

New TP0500 The fastest Pile of Chips Possible TP0500 was developed specifically for applications requiring a very high degree of heat and wear resistance, especially when the cutting conditions can be fine-tuned to maximize productivity. This grade s outstanding deformation and abrasion resistance make it ideal for users who typically work with stable set-ups and can trade some toughness for added speed capability. The increased heat resistance of TP0500 makes it an excellent complement to Seco s other steel cutting grades, TP1500, TP2500 and TP3500. Metallurgically, TP0500 consists of a hard substrate combined with a Duratomic coating. Practically, this means you get the most wear resistant coating for steel applications sitting on top of a hard, deformation resistant base layer. This arrangement withstands tremendous amounts of heat. Increased speed capability, even when the time in cut is long High metal removal rates, ideal for roughing and semi-roughing operations Fewer machine offsets Longer times between insert indexes Ability to machine harder parts Ability to hold tighter tolerances Seco Duratomic coated Grades for Steel Machining V c TP0500 TP1500 TP2500 TP3500 SPEED WEAR RESISTANCE TOUGHNESS 5 005-008 Turn Tech.indd 5 2/12/2010 7:23:43 AM

Turning - Code keys A.N.S.I. Insert Identification System W 1 N 2 M 3 G 4 3 5 3 6 2 7 8 - M3 9 1. Shape 2. Insert clearance angle 3. Tolerances C = Diamond 80 D = Diamond 55 R = Round S = Square T = Triangle V = Diamond 35 W = Trigon 80 N = 0 B = 5 C = 7 P = 11 D = 15 E = 20 Insert I.C. Thickness A = ±.001 ±.001 C = ±.001 ±.001 E = ±.001 ±.001 G = ±.001 ±.005 M* = ±.002 ±.005 ±.004 ±.005 U* = ±.003 ±.005 ±.010 ±.005 *Exact tolerance is determined by size of insert 4. Type A = With hole, no chipbreaker. B = With hole and one counter sink. E = Smaller than 1/4 I.C. without hole. G = With hole and chipbreaker on both faces. H = With hole, counter sink and chipgroove. M = With hole and chipbreaker on one face only. P*= 10 positive-land with hole and chipbreaker. R = Without hole, chipbreaker on one face only. T = C-Lock hole with chipbreaker on one face only. U = Negative insert with hole and chipbreaker on both faces for D-style and pin lock holders. W = C-Lock hole, no chipbreaker. *Non ANSI Standard 5. Size For equal sided inserts I.C. in 1/8ths of an inch. Examples: 1/8 = 1 5/32 = 1.2 3/16 = 1.5 7/32 = 1.8 1/4 = 2 5/16 = 2.5 3/8 = 3 1/2 = 4 5/8 = 5 3/4 = 6 7/8 = 7 1 = 8 1 1/4 = 10 Rectangle and parallelogram inserts require two digits: 1st Digit-Number of 1/8ths in width. 2nd Digit-Number of 1/4ths in length. 6. Thickness Number of 1/32nds on inserts less than 1/4 I.C. Number of 1/16ths on inserts 1/4 I.C. and over. 7. Nose radius 0.0 = Sharp to 1/512 0 = Sharp to 1/256 0.5 = 1/128 1 = 1/64 2 = 1/32 3 = 3/64 4 = 1/16 6 = 3/32 8 = 1/8 8. Cutting edge condition F = Sharp cutting edges. E = Honed cutting edges. T = Chamfered cutting edges. S = Chamfered and honed cutting edges. K = Double chamfered cutting edges. P = Double chamfered and rounded cutting edges. 9. Manufacturer s option e.g. chipbreaker designation F = Finishing M = Medium R = Roughing 1 = For low feed rates and easy conditions 9 = For high feed rates and rough conditions 6 005-008 Turn Tech.indd 6 2/12/2010 7:23:44 AM

Duratomic - Insert Program Steel grades - First choice TP0500 First choice when maximum productivity under stable conditions is desired. Incorporates the Duratomic coating technology. TP1500 Intended for general turning of steel and alloyed steel. The high wear resistance offers high speed capability. TP2500 TP3500 Intended for a wide range of turning applications in both steels and stainless steels. Also a good choice for cast iron. The wear resistance and edge strength together with the high versatility make the grade the first choice in a large number of applications. First choice for rough or intermittent turning in steels and stainless steels as well as general turning of stainless steels. Stainless Steel grades - First choice TM2000 First choice for continuous cuts in stainless steels, particularly when extended time in cut is required. Utilizes the Duratomic coating process. TM4000 First choice for rough or intermittent turning in stainless steels. Utilizes the Duratomic coating process. 7 005-008 Turn Tech.indd 7 2/12/2010 7:23:47 AM

Duratomic - Cutting Data Cutting Speed The recommended cutting speeds (sf/min) in the tables are estimated for 15 minutes tool life for Seco Material Groups 1-6 and 12-15, and 10 minutes tool life for Seco Material Group 8-11. Tool life also depends on the depth of cut used and the insert nose radius. The cutting speeds in the tables are based on cutting depth.098 inch and nose radius.031 inch. For more accurate recommendations with other combinations of cutting depths and nose radius and other feed rates than those used in the tables, use the Secolor Turning calculator, please see www.secotools.com. CVD coated grades TP0500 TP1500 TP2500 TP3500 Feed rate, f inch/rev Seco Material.008.016.024.008.016.024.008.016.024.008.016.024 Group No. Cutting speed, vc sf/min 1 3166 2247 1198 2755 2020 1640 1905 1460 1215 1575 1200 925 2 2690 1903 1017 2360 1740 1410 1610 1230 1035 1328 1000 770 3 2215 1575 837 2020 1475 1200 1360 1050 885 1100 835 640 4 1886 1345 722 1655 1215 985 1130 870 720 935 705 540 5 1575 1115 591 1395 1035 835 950 740 625 790 590 460 6 1378 984 525 1280 935 770 870 675 560 690 525 400 8 1065 755 425 1050 605 370 9 835 605 330 820 475 285 10 690 490 280 670 395 235 11 510 360 195 510 280 165 12 1100 820 675 13 970 720 590 14 835 625 510 15 690 510 410 CVD coated grades TM2000 TM4000 Feed rate, f inch/rev Seco Material.008.016.024.008.016.024 Group No. Cutting speed, vc sf/min 1 2 3 4 5 6 8 985 720 575 785 575 460 9 770 575 460 625 460 360 10 640 475 375 510 375 295 11 460 345 280 375 280 215 12 13 14 15 8 005-008 Turn Tech.indd 8 2/12/2010 7:23:47 AM

Turning 9 009 Turning Beauty.indd 9 2/12/2010 7:25:08 AM

010-033 SecoCaptoDStyle.fm Page 10 Thursday, February 11, 2010 1:19 PM Seco-Capto Toolholders, external Toolholders for inserts CNGA, CNGP, CNMA, CNMG and CNMP Seco-Capto Toolholders, external DCLNR/L..-M Inserts, please see pages 38-43, 91, 93 γ o = Cutting rake, γ p = Back rake Right-hand version shown Application 95 Insert I.C. D 5m f 1 l 1 D m1 D m2 γ o γ p Gage insert 3/8 C4-DCLNR-27050-09-M 1.57 1.06 1.97 2.95 6.50-6 -6 0.88 CNMG 322 C4-DCLNL-27050-09-M 1.57 1.06 1.97 2.95 6.50-6 -6 0.88 CNMG 322 1/2 C4-DCLNR-27050-12-M 1.57 1.06 1.97 2.95 6.50-6 -6 0.88 CNMG 432 C4-DCLNL-27050-12-M 1.57 1.06 1.97 2.95 6.50-6 -6 0.88 CNMG 432 5/8 C4-DCLNR-27055-16-M 1.57 1.06 2.17 2.95 6.50-6 -6 0.88 CNMG 543 C4-DCLNL-27055-16-M 1.57 1.06 2.17 2.95 6.50-6 -6 0.88 CNMG 543 1/2 C5-DCLNR-35060-12-M 1.97 1.38 2.36 3.74 6.50-6 -6 1.76 CNMG 432 C5-DCLNL-35060-12-M 1.97 1.38 2.36 3.74 6.50-6 -6 1.76 CNMG 432 5/8 C5-DCLNR-35060-16-M 1.97 1.38 2.36 3.74 6.50-6 -6 1.76 CNMG 543 C5-DCLNL-35060-16-M 1.97 1.38 2.36 3.74 6.50-6 -6 1.76 CNMG 543 3/4 C5-DCLNR-35060-19-M 1.97 1.38 2.36 3.74 6.50-6 -6 1.76 CNMG 643 C5-DCLNL-35060-19-M 1.97 1.38 2.36 3.74 6.50-6 -6 1.76 CNMG 643 Spare Parts, Parts included in delivery Anvil Anvil screw Clamp set Key Optional anvil* Toolholder/ Insert dimension -09 DCN 322.5 C03007-T09P CD09-S09 T09P-2-12 DCN 444* C04008-T15P CD12-S12 T15P-2 DCN 434-16 DCN 544 C05010-T20P CD16-S16 T20P-7L -19 DCN 634 C05010-T20P CD19-S19 T20P-7L Please check availability in current price and stock-list * Anvil DCN 434 for insert CN..44. to be ordered separately 10

010-033 SecoCaptoDStyle.fm Page 11 Thursday, February 11, 2010 1:19 PM Seco-Capto Toolholders, external Toolholders for inserts CNGA, CNGP, CNMA, CNMG and CNMP DCLNR/L..-M, DCLNR/L Inserts, please see pages 38-43, 91, 93 γ o = Cutting rake, γ p = Back rake Right-hand version shown Application 95 Insert I.C. D 5m f 1 l 1 D m1 D m2 γ o γ p Gage insert 1/2 C6-DCLNR-45065-12-M 2.48 1.77 2.56 4.76 6.50-6 -6 3.08 CNMG 432 C6-DCLNL-45065-12-M 2.48 1.77 2.56 4.76 6.50-6 -6 3.08 CNMG 432 5/8 C6-DCLNR-45065-16-M 2.48 1.77 2.56 4.76 6.50-6 -6 3.08 CNMG 543 C6-DCLNL-45065-16-M 2.48 1.77 2.56 4.76 6.50-6 -6 3.08 CNMG 543 3/4 C6-DCLNR-45065-19-M 2.48 1.77 2.56 4.76 6.50-6 -6 3.08 CNMG 643 C6-DCLNL-45065-19-M 2.48 1.77 2.56 4.76 6.50-6 -6 3.08 CNMG 643 5/8 C8-DCLNR-55080-16 3.15 2.16 3.15 4.92 5.90-6 -6 5.51 CNMG 543 C8-DCLNL-55080-16 3.15 2.16 3.15 4.92 5.90-6 -6 5.51 CNMG 543 3/4 C8-DCLNR-55080-19 3.15 2.16 3.15 3.94 9.84-6 -6 5.51 CNMG 643 C8-DCLNL-55080-19 3.15 2.16 3.15 3.94 9.84-6 -6 5.51 CNMG 643 1.0 C8-DCLNR-55080-25 3.15 2.16 3.15 5.90 9.84-6 -6 5.51 CNMG 866 C8-DCLNL-55080-25 3.15 2.16 3.15 5.90 9.84-6 -6 5.51 CNMG 866 Spare Parts, Parts included in delivery Anvil Anvil screw Clamp set Key Optional anvil* Toolholder/ Insert dimension C6..-12 DCN 444* C03007-T09P CD09-S09 T09P-2 DCN 434 C6..-16 DCN 544 C04008-T15P CD12-S12 T15P-2 C6..-19 DCN 634 C05010-T20P CD16-S16 T20P-7L C8..-16 DCN 544 C05010-T20P CD16-S16 T20P-7L C8..-19 DCN 634 C05010-T20P CD19-S19 T20P-7L C8..-25 DCN 836 C06012-T25P CD25-S25 T25P-7L Please check availability in current price and stock-list * Anvil DCN 434 for insert CN..44. to be ordered separately 11

010-033 SecoCaptoDStyle.fm Page 12 Thursday, February 11, 2010 1:19 PM Seco-Capto Toolholders, external Toolholders for inserts CNGP, CNMA, CNMG and CNMP DCRNR/L..-M Inserts, please see pages 38-43, 93 γ o = Cutting rake, γ p = Back rake Right-hand version shown Application 75 Insert I.C. D 5m f 1 l 1 D m2 γ o γ p Gage insert 1/2 C4-DCRNR-22050-12-M 1.57 0.87 1.97 6.50-6 -6 1.10 CNMG 432 C4-DCRNL-22050-12-M 1.57 0.87 1.97 6.50-6 -6 1.10 CNMG 432 5/8 C4-DCRNR-22055-16-M 1.57 0.87 1.97 6.50-6 -6 1.10 CNMG 543 C4-DCRNL-22055-16-M 1.57 0.87 1.97 6.50-6 -6 1.10 CNMG 543 1/2 C5-DCRNR-27060-12-M 1.97 1.06 2.36 6.50-6 -6 1.98 CNMG 432 C5-DCRNL-27060-12-M 1.97 1.06 2.36 6.50-6 -6 1.98 CNMG 432 5/8 C5-DCRNR-27060-16-M 1.97 1.06 2.36 6.50-6 -6 1.98 CNMG 543 C5-DCRNL-27060-16-M 1.97 1.06 2.36 6.50-6 -6 1.98 CNMG 543 3/4 C5-DCRNR-27060-19-M 1.97 1.06 2.36 6.50-6 -6 1.98 CNMG 643 C5-DCRNL-27060-19-M 1.97 1.06 2.36 6.50-6 -6 1.98 CNMG 643 Spare Parts, Parts included in delivery Anvil Anvil screw Clamp set Key Optional anvil* Toolholder/ Insert dimension -12 DCN 444* C03007-T09P CD09-S09 T09P-2 DCN 434-16 DCN 544 C04008-T15P CD12-S12 T15P-2-19 DCN 634 C05010-T20P CD16-S16 T20P-7L Please check availability in current price and stock-list * Anvil DCN 434 for insert CN..44. to be ordered separately 12

010-033 SecoCaptoDStyle.fm Page 13 Thursday, February 11, 2010 1:19 PM Seco-Capto Toolholders, external Toolholders for inserts CNGP, CNMA, CNMG and CNMP DCRNR/L..-M Inserts, please see pages 38-43, 93 γ o = Cutting rake, γ p = Back rake Right-hand version shown Application 75 Insert I.C. D 5m f 1 l 1 D m2 γ o γ p Gage insert 1/2 C6-DCRNR-35065-12-M 2.48 1.38 2.56 6.50-6 -6 3.30 CNMG 432 C6-DCRNL-35065-12-M 2.48 1.38 2.56 6.50-6 -6 3.30 CNMG 432 5/8 C6-DCRNR-35065-16-M 2.48 1.38 2.56 6.50-6 -6 3.30 CNMG 543 C6-DCRNL-35065-16-M 2.48 1.38 2.56 6.50-6 -6 3.30 CNMG 543 3/4 C6-DCRNR-35065-19-M 2.48 1.38 2.56 6.50-6 -6 3.30 CNMG 643 C6-DCRNL-35065-19-M 2.48 1.38 2.56 6.50-6 -6 3.30 CNMG 643 5/8 C8-DCRNR-55080-16-M 3.15 2.16 3.15 9.84-6 -6 5.51 CNMG 543 C8-DCRNL-55080-16-M 3.15 2.16 3.15 9.84-6 -6 5.51 CNMG 543 3/4 C8-DCRNR-55080-19-M 3.15 2.16 3.15 9.84-6 -6 5.51 CNMG 643 C8-DCRNL-55080-19-M 3.15 2.16 3.15 9.84-6 -6 5.51 CNMG 643 Spare Parts, Parts included in delivery Anvil Anvil screw Clamp set Key Optional anvil* Toolholder/ Insert dimension C6..-12 DCN 444* C03007-T09P CD09-S09 T09P-2 DCN 434 C6..-16 DCN 544 C04008-T15P CD12-S12 T15P-2 C6..-19 DCN 634 C05010-T20P CD16-S16 T20P-7L C8..-16 DCN 544 C05010-T20P CD16-S16 T20P-7L C8..-19 DCN 634 C05010-T20P CD19-S19 T20P-7L Please check availability in current price and stock-list * Anvil DCN 434 for insert CN..44. to be ordered separately 13

010-033 SecoCaptoDStyle.fm Page 14 Thursday, February 11, 2010 1:19 PM Seco-Capto Toolholders, external Toolholders for inserts CNGP, CNMA, CNMG and CNMP DCKNR/L..-M Inserts, please see pages 38-43, 93 γ o = Cutting rake, γ p = Back rake Right-hand version shown Application 75 Insert I.C. D 5m f 1 l 1 D m1 γ o γ p Gage insert 3/8 C4-DCKNR-27050-09-M 1.57 1.06 1.97 2.95-6 -6 0.88 CNMG 322 C4-DCKNL-27050-09-M 1.57 1.06 1.97 2.95-6 -6 0.88 CNMG 322 1/2 C4-DCKNR-27050-12-M 1.57 1.06 1.97 2.95-6 -6 0.88 CNMG 432 C4-DCKNL-27050-12-M 1.57 1.06 1.97 2.95-6 -6 0.88 CNMG 432 5/8 C4-DCKNR-27050-16-M 1.57 1.06 1.97 2.95-6 -6 0.88 CNMG 543 C4-DCKNL-27050-16-M 1.57 1.06 1.97 2.95-6 -6 0.88 CNMG 543 1/2 C5-DCKNR-35060-12-M 1.97 1.38 2.36 3.74-6 -6 1.76 CNMG 432 C5-DCKNL-35060-12-M 1.97 1.38 2.36 3.74-6 -6 1.76 CNMG 432 5/8 C5-DCKNR-35060-16-M 1.97 1.38 2.36 3.74-6 -6 1.76 CNMG 543 C5-DCKNL-35060-16-M 1.97 1.38 2.36 3.74-6 -6 1.76 CNMG 543 3/4 C5-DCKNR-35060-19-M 1.97 1.38 2.36 3.74-6 -6 1.76 CNMG 643 C5-DCKNL-35060-19-M 1.97 1.38 2.36 3.74-6 -6 1.76 CNMG 643 Spare Parts, Parts included in delivery Anvil Anvil screw Clamp set Key Optional anvil* Toolholder/ Insert dimension -09 DCN 322.5 C03007-T09P CD09-S09 T09P-2-12 DCN 444* C04008-T15P CD12-S12 T15P-2 DCN 434-16 DCN 544 C05010-T20P CD16-S16 T20P-7L -19 DCN 634 C05010-T20P CD19-S19 T20P-7L Please check availability in current price and stock-list * Anvil DCN 434 for insert CN..44. to be ordered separately 14

010-033 SecoCaptoDStyle.fm Page 15 Thursday, February 11, 2010 1:19 PM Seco-Capto Toolholders, external Toolholders for inserts CNGP, CNMA, CNMG and CNMP DCKNR/L..-M Inserts, please see pages 38-43, 93 γ o = Cutting rake, γ p = Back rake Right-hand version shown Application 75 Insert I.C. D 5m f 1 l 1 D m1 γ o γ p Gage insert 1/2 C6-DCKNR-45065-12-M 2.48 1.77 2.56 4.76-6 -6 3.08 CNMG 432 C6-DCKNL-45065-12-M 2.48 1.77 2.56 4.76-6 -6 3.08 CNMG 432 5/8 C6-DCKNR-45065-16-M 2.48 1.77 2.56 4.76-6 -6 3.08 CNMG 543 C6-DCKNL-45065-16-M 2.48 1.77 2.56 4.76-6 -6 3.08 CNMG 543 3/4 C6-DCKNR-45065-19-M 2.48 1.77 2.56 4.76-6 -6 3.08 CNMG 643 C6-DCKNL-45065-19-M 2.48 1.77 2.56 4.76-6 -6 3.08 CNMG 643 Spare Parts, Parts included in delivery Anvil Anvil screw Clamp set Key Optional anvil* Toolholder/ Insert dimension -12 DCN 444* C04008-T15P CD12-S12 T15P-2 DCN 434-16 DCN 544 C05010-T20P CD16-S16 T20P-7L -19 DCN 634 C05010-T20P CD19-S19 T20P-7L Please check availability in current price and stock-list * Anvil DCN 434 for insert CN..44. to be ordered separately 15

010-033 SecoCaptoDStyle.fm Page 16 Thursday, February 11, 2010 1:19 PM Seco-Capto Toolholders, external Toolholders for inserts DNGA, DNGM, DNGP, DNMA, DNMG, DNMM, DNMP, DNMU and DNMX DDJNR/L..-M Inserts, please see pages 48-52, 96-98 γ o = Cutting rake, γ p = Back rake Right-hand version shown Application 93 Insert I.C. D 5m f 1 l 1 D m1 D m2 γ o γ p Gage insert 3/8 C4-DDJNR-27050-11-M 1.57 1.06 1.97 2.95 6.50-6 -6 0.88 DNMU 332 C4-DDJNL-27050-11-M 1.57 1.06 1.97 2.95 6.50-6 -6 0.88 DNMU 332 C5-DDJNR-35060-11-M 1.97 1.38 2.36 3.74 6.50-6 -6 1.76 DNMU 332 C5-DDJNL-35060-11-M 1.97 1.38 2.36 3.74 6.50-6 -6 1.76 DNMU 332 C6-DDJNR-45065-11-M 2.48 1.77 2.56 4.76 6.50-6 -6 3.08 DNMU 332 C6-DDJNL-45065-11-M 2.48 1.77 2.56 4.76 6.50-6 -6 3.08 DNMU 332 1/2 C4-DDJNR-27055-15-04-M 1.57 1.06 2.17 2.95 6.50-6 -6 0.88 DNMG 432 C4-DDJNL-27055-15-04-M 1.57 1.06 2.17 2.95 6.50-6 -6 0.88 DNMG 432 C5-DDJNR-35060-15-04-M 1.97 1.38 2.36 3.74 6.50-6 -6 1.76 DNMG 432 C5-DDJNL-35060-15-04-M 1.97 1.38 2.36 3.74 6.50-6 -6 1.76 DNMG 432 C6-DDJNR-45065-15-04-M 2.48 1.77 2.56 4.76 6.50-6 -6 3.08 DNMG 432 C6-DDJNL-45065-15-04-M 2.48 1.77 2.56 4.76 6.50-6 -6 3.08 DNMG 432 C8-DDJNR-55080-15-04-M 3.15 2.16 3.15 4.33 9.84-7 -6 5.51 DNMG 432 C8-DDJNL-55080-15-04-M 3.15 2.16 3.15 4.33 9.84-7 -6 5.51 DNMG 432 Spare Parts, Parts included in delivery Anvil Anvil screw Clamp set Key Optional anvil* Toolholder/ Insert dimension -11 DSN 323 C03007-T09P CD09-S09 T09P-2-15-04 DDN 444* C04008-T15P CD12-S12 T15P-2 DDN 434 C8..-15-04 DDN 444* C04008-T15P CD12-S12 T15P-2 DDN 434 Please check availability in current price and stock-list * Anvil DDN 434 for insert DN..44. to be ordered separately 16

010-033 SecoCaptoDStyle.fm Page 17 Thursday, February 11, 2010 1:19 PM Seco-Capto Toolholders, external Toolholders for inserts DNGA, DNGM, DNGP, DNMA, DNMG, DNMM, DNMP and DNMX DDUNR/L..-M Inserts, please see pages 48-52, 96-98 γ o = Cutting rake, γ p = Back rake Right-hand version shown Application 93 Insert I.C. D 5m f 1 l 1 D m1 D m2 γ o γ p Gage insert 1/2 C4-DDUNR-27050-15-04-M 1.57 1.06 1.97 4.33 5.51-6 -7 0.88 DNMG 432 C4-DDUNL-27050-15-04-M 1.57 1.06 1.97 4.33 5.51-6 -7 0.88 DNMG 432 C5-DDUNR-35060-15-04-M 1.97 1.38 2.36 4.33 6.50-6 -7 1.76 DNMG 432 C5-DDUNL-35060-15-04-M 1.97 1.38 2.36 4.33 6.50-6 -7 1.76 DNMG 432 C6-DDUNR-45065-15-04-M 2.48 1.77 2.56 4.33 7.48-6 -7 3.09 DNMG 432 C6-DDUNL-45065-15-04-M 2.48 1.77 2.56 4.33 7.48-6 -7 3.09 DNMG 432 C8-DDUNR-55080-15-04-M 3.15 3.15 3.15 4.33 9.84-6 -7 5.51 DNMG 432 C8-DDUNL-55080-15-04-M 3.15 3.15 3.15 4.33 9.84-6 -7 5.51 DNMG 432 Spare Parts, Parts included in delivery Anvil Anvil screw Clamp set Key Optional anvil* Toolholder/ Insert dimension -15-04 DDN 444* C04008-T15P CD12-S12 T15P-7 DDN 434 Please check availability in current price and stock-list * Anvil UDN 433 for insert DN.. 44., to be ordered separately. 17

010-033 SecoCaptoDStyle.fm Page 18 Thursday, February 11, 2010 1:19 PM Seco-Capto Toolholders, external Toolholders for inserts DNGA, DNGM, DNGP, DNMA, DNMG, DNMM, DNMU and DNMP DDNNN..-M Inserts, please see pages 48-51, 96-98 γ o = Cutting rake, γ p = Back rake Neutral version shown Application 63 Insert I.C. D 5m f 1 l 1 D m1 D m2 γ o γ p Gage insert 3/8 C4-DDNNN-00050-11-M 1.57 0.02 1.97 1.57 6.50-9 -5 0.88 DNMU 332 C5-DDNNN-00060-11-M 1.97 0.02 2.36 1.97 6.50-9 -5 1.32 DNMU 332 C6-DDNNN-00065-11-M 2.48 0.02 2.56 2.48 6.50-9 -5 2.42 DNMU 332 1/2 C4-DDNNN-00050-15-04-M 1.57 0.02 2.17 1.57 6.50-9 -5 0.66 DNMG 432 C5-DDNNN-00060-15-04-M 1.97 0.02 2.36 1.97 6.50-9 -5 1.32 DNMG 432 C6-DDNNN-00065-15-04-M 2.48 0.02 2.56 2.48 6.50-9 -5 2.42 DNMG 432 Spare Parts, Parts included in delivery Anvil Anvil screw Clamp set Key Optional anvil* Toolholder/ Insert dimension -11 DSN 323 C03007-T09P CD09-S09 T09P-2-15-04 DDN 444* C04008-T15P CD12-S12 T15P-2 DDN 434 Please check availability in current price and stock-list * Anvil DDN 434 for insert DN..44. to be ordered separately. 18

010-033 SecoCaptoDStyle.fm Page 19 Thursday, February 11, 2010 1:19 PM Seco-Capto Toolholders, external Toolholders for inserts RNMA and RNMG DRSNR/L..-M Inserts, please see pages 57 γ o = Cutting rake, γ p = Back rake Right-hand version shown Application Insert I.C. D 5m f 1 l 1 D m1 D m2 γ o γ p Gage insert 1/2 C4-DRSNR-27050-12-M 1.57 1.06 1.97 2.95 6.50-6 -8 0.88 RNMG 43 C4-DRSNL-27050-12-M 1.57 1.06 1.97 2.95 6.50-6 -8 0.88 RNMG 43 C5-DRSNR-35060-12-M 1.97 1.38 2.36 3.74 6.50-6 -8 1.76 RNMG 43 C5-DRSNL-35060-12-M 1.97 1.38 2.36 3.74 6.50-6 -8 1.76 RNMG 43 3/4 C5-DRSNR-35060-19-M 1.97 1.38 2.36 3.74 6.50-6 -8 1.76 RNMG 64 C5-DRSNL-35060-19-M 1.97 1.38 2.36 3.74 6.50-6 -8 1.76 RNMG 64 1/2 C6-DRSNR-45065-12-M 2.48 1.77 2.56 4.76 6.50-6 -8 3.08 RNMG 43 C6-DRSNL-45065-12-M 2.48 1.77 2.56 4.76 6.50-6 -8 3.08 RNMG 43 3/4 C6-DRSNR-45065-19-M 2.48 1.77 2.56 4.76 6.50-6 -8 3.08 RNMG 64 C6-DRSNL-45065-19-M 2.48 1.77 2.56 4.76 6.50-6 -8 3.08 RNMG 64 Spare Parts, Parts included in delivery Anvil Anvil screw Clamp set Key Toolholder/ Insert dimension -12 DRN 44 C04008-T15P CD12-S12 T15P-2-19 DRN 64 C05010-T20P CD19-S19 T20P-7L Please check availability in current price and stock-list 19

010-033 SecoCaptoDStyle.fm Page 20 Thursday, February 11, 2010 1:19 PM Seco-Capto Toolholders, external Toolholders for inserts SNGA, SNMA, SNMG, SNMM and SNMP DSRNR/L..-M, DSRNR/L Inserts, please see pages 59-62, 103, 105 γ o = Cutting rake, γ p = Back rake Right-hand version shown Application 75 Insert I.C. D 5m f 1 l 1 D m2 γ o γ p Gage insert 3/8 C4-DSRNR-22050-09-M 1.57 0.87 1.97 6.50-6 -6 0.88 SNMG 322 C4-DSRNL-22050-09-M 1.57 0.87 1.97 6.50-6 -6 0.88 SNMG 322 1/2 C4-DSRNR-22050-12-M 1.57 0.87 1.97 6.50-6 -6 0.88 SNMG 432 C4-DSRNL-22050-12-M 1.57 0.87 1.97 6.50-6 -6 0.88 SNMG 432 5/8 C4-DSRNR-22055-15-M 1.57 0.87 1.97 6.50-6 -6 0.88 SNMG 543 C4-DSRNL-22055-15-M 1.57 0.87 1.97 6.50-6 -6 0.88 SNMG 543 1/2 C5-DSRNR-27060-12 1.97 1.06 2.36 6.50-6 -6 1.76 SNMG 432 C5-DSRNL-27060-12 1.97 1.06 2.36 6.50-6 -6 1.76 SNMG 432 5/8 C5-DSRNR-27060-15 1.97 1.06 2.36 6.50-6 -6 1.76 SNMG 543 C5-DSRNL-27060-15 1.97 1.06 2.36 6.50-6 -6 1.76 SNMG 543 3/4 C5-DSRNR-27060-19 1.97 1.06 2.36 6.50-6 -6 1.76 SNMG 643 C5-DSRNL-27060-19 1.97 1.06 2.36 6.50-6 -6 1.76 SNMG 643 Spare Parts, Parts included in delivery Anvil Anvil screw Clamp set Key Optional anvil* Toolholder/ Insert dimension -09 DSN 322.5 C03007-T09P CD09-S09 T09P-2-12 DSN 444* C04008-T15P CD12-S12 T15P-2 DSN 434-15 DSN 546 C05010-T20P CD16-S16 T20P-7L -19 DSN 646 C05010-T20P CD19-S19 T20P-7L Please check availability in current price and stock-list * Anvil DSN 434 for insert SN..44. to be ordered separately. 20

010-033 SecoCaptoDStyle.fm Page 21 Thursday, February 11, 2010 1:19 PM Seco-Capto Toolholders, external Toolholders for inserts SNGA, SNMA, SNMG, SNMM and SNMP DSRNR/L..-M, DSRNR/L Inserts, please see pages 59-62, 103, 105 γ o = Cutting rake, γ p = Back rake Right-hand version shown Application 75 Insert I.C. D 5m f 1 l 1 D m2 γ o γ p Gage insert 1/2 C6-DSRNR-35065-12-M 2.48 1.38 2.56 6.50-6 -6 3.30 SNMG 432 C6-DSRNL-35065-12-M 2.48 1.38 2.56 6.50-6 -6 3.30 SNMG 432 5/8 C6-DSRNR-35065-15-M 2.48 1.38 2.56 6.50-6 -6 3.30 SNMG 543 C6-DSRNL-35065-15-M 2.48 1.38 2.56 6.50-6 -6 3.30 SNMG 543 3/4 C6-DSRNR-35065-19-M 2.48 1.38 2.56 6.50-6 -6 3.30 SNMG 643 C6-DSRNL-35065-19-M 2.48 1.38 2.56 6.50-6 -6 3.30 SNMG 643 3/4 C8-DSRNR-45080-19 3.15 1.77 3.15 9.84-6 -6 5.51 SNMG 643 C8-DSRNL-45080-19 3.15 1.77 3.15 9.84-6 -6 5.51 SNMG 643 1.0 C8-DSRNR-45080-25-09 3.15 1.77 3.15 9.84-6 -6 5.51 SNMG 866 C8-DSRNL-45080-25-09 3.15 1.77 3.15 9.84-6 -6 5.51 SNMG 866 Spare Parts, Parts included in delivery Anvil Anvil screw Clamp set Key Optional anvil* Toolholder/ Insert dimension -12 DSN 444* C04008-T15P CD12-S12 T15P-2 DSN 434-15 DSN 546 C05010-T20P CD16-S16 T20P-7L -19 DSN 646 C05010-T20P CD19-S19 T20P-7L C8-19 DSN 646 C05010-T15P CD19-S19 T20P-7 C8-25-09 DSN 836** C06012-T25P CD25-S25 T25P-7 Please check availability in current price and stock-list * Anvil DSN 434 for insert SN..44. to be ordered separately. **Anvil DSN 846 for insert SN..85. to be ordered separately. 21

010-033 SecoCaptoDStyle.fm Page 22 Thursday, February 11, 2010 1:19 PM Seco-Capto Toolholders, external Toolholders for inserts SNGA, SNMA, SNMG, SNMM and SNMP DSSNR/L..-M Inserts, please see pages 59-62, 103, 105 γ o = Cutting rake, γ p = Back rake Right-hand version shown Application 45 Insert I.C. D 5m f 1 f 1S l 1 l 1S D m1 D m2 γ o γ p Gage insert 3/8 C4-DSSNR-27044-09-M 1.57 1.06 0.82 1.73 1.97 2.95 6.50-8 0 0.88 SNMG 322 C4-DSSNL-27044-09-M 1.57 1.06 0.82 1.73 1.97 2.95 6.50-8 0 0.88 SNMG 322 1/2 C4-DSSNR-27042-12-M 1.57 1.06 0.74 1.65 1.98 2.95 6.50-8 0 0.88 SNMG 432 C4-DSSNL-27042-12-M 1.57 1.06 0.74 1.65 1.98 2.95 6.50-8 0 0.88 SNMG 432 5/8 C4-DSSNR-27045-15-M 1.57 1.06 0.66 1.77 2.17 2.95 6.50-8 0 0.88 SNMG 543 C4-DSSNL-27045-15-M 1.57 1.06 0.66 1.77 2.17 2.95 6.50-8 0 0.88 SNMG 543 1/2 C5-DSSNR-35052-12-M 1.97 1.38 1.05 2.05 2.37 3.74 6.50-8 0 1.54 SNMG 432 C5-DSSNL-35052-12-M 1.97 1.38 1.05 2.05 2.37 3.74 6.50-8 0 1.54 SNMG 432 5/8 C5-DSSNR-35050-15-M 1.97 1.38 0.98 1.97 2.37 3.74 6.50-8 0 1.54 SNMG 543 C5-DSSNL-35050-15-M 1.97 1.38 0.98 1.97 2.37 3.74 6.50-8 0 1.54 SNMG 543 3/4 C5-DSSNR-35048-19-M 1.97 1.38 0.89 1.89 2.38 3.74 6.50-8 0 1.54 SNMG 643 C5-DSSNL-35048-19-M 1.97 1.38 0.89 1.89 2.38 3.74 6.50-8 0 1.54 SNMG 643 Spare Parts, Parts included in delivery Anvil Anvil screw Clamp set Key Optional anvil* Toolholder/ Insert dimension -09 DSN 322.5 C03007-T09P CD09-S09 T09P-2-12 DSN 444* C04008-T15P CD12-S12 T15P-2 DSN 434-15 DSN 546 C05010-T20P CD16-S16 T20P-7L -19 DSN 646 C05010-T20P CD19-S19 T20P-7L Please check availability in current price and stock-list * Anvil DSN 434 for insert SN..44. to be ordered separately. 22

010-033 SecoCaptoDStyle.fm Page 23 Thursday, February 11, 2010 1:19 PM Seco-Capto Toolholders, external Toolholders for inserts SNGA, SNMA, SNMG, SNMM and SNMP DSSNR/L..-M, DSSNR/L Inserts, please see pages 59-62, 103, 105 γ o = Cutting rake, γ p = Back rake Right-hand version shown Application 45 Insert I.C. D 5m f 1 f 1S l 1 l 1S D m1 D m2 γ o γ p Gage insert 1/2 C6-DSSNR-45056-12-M 2.48 1.77 1.44 2.20 2.53 4.76 6.50-8 0 2.64 SNMG 432 C6-DSSNL-45056-12-M 2.48 1.77 1.44 2.20 2.53 4.76 6.50-8 0 2.64 SNMG 432 5/8 C6-DSSNR-45054-15-M 2.48 1.77 1.37 2.13 2.53 4.76 6.50-8 0 2.64 SNMG 543 C6-DSSNL-45054-15-M 2.48 1.77 1.37 2.13 2.53 4.76 6.50-8 0 2.64 SNMG 543 3/4 C6-DSSNR-45052-19-M 2.48 1.77 1.28 2.05 2.54 4.76 6.50-8 0 2.64 SNMG 643 C6-DSSNL-45052-19-M 2.48 1.77 1.28 2.05 2.54 4.76 6.50-8 0 2.64 SNMG 643 1.0 C8-DSSNR-55070-25-09 3.15 2.16 1.52 2.76 3.40 5.90 10.08-8 0 5.51 SNMG 866 C8-DSSNL-55070-25-09 3.15 2.16 1.52 2.76 3.40 5.90 10.08-8 0 5.51 SNMG 866 Spare Parts, Parts included in delivery Anvil Anvil screw Clamp set Key Optional anvil* Toolholder/ Insert dimension -12 DSN 444* C04008-T15P CD12-S12 T15P-2 DSN 434-15 DSN 546 C05010-T20P CD16-S16 T20P-7L -19 DSN 646 C05010-T20P CD19-S19 T20P-7L -25-09 DSN 836** C06012-T25P CD25-S25 T25P-7 DSN 846 Please check availability in current price and stock-list * Anvil DSN 434 for insert SN..44. to be ordered separately. **Anvil DSN 846 for insert SN..85. to be ordered separately. 23

010-033 SecoCaptoDStyle.fm Page 24 Thursday, February 11, 2010 1:19 PM Seco-Capto Toolholders, external Toolholders for inserts SNGA, SNMA, SNMG, SNMM and SNMP DSDNN..-M, DSDNN Inserts, please see pages 59-62, 103, 105 γ o = Cutting rake, γ p = Back rake Neutral version shown Application 45 Insert I.C. 3/8 1/2 5/8 1/2 5/8 3/4 1/2 5/8 3/4 D 5m f 1 l 1 D m1 D m2 γ o γ p Gage insert C4-DSDNN-00050-09-M 1.57 0.01 1.97 1.57 6.50-6 -6 0.88 SNMG 322 C4-DSDNN-00050-12-M 1.57 0.01 1.97 1.57 6.50-6 -6 0.88 SNMG 432 C4-DSDNN-00055-15-M 1.57 0.02 2.17 1.57 6.50-6 -6 0.88 SNMG 543 C5-DSDNN-00060-12-M 1.97 0.01 2.36 1.97 6.50-6 -6 1.54 SNMG 432 C5-DSDNN-00060-15-M 1.97 0.02 2.36 1.97 6.50-6 -6 1.54 SNMG 543 C5-DSDNN-00060-19-M 1.97 0.02 2.36 1.97 6.50-6 -6 1.54 SNMG 643 C6-DSDNN-00065-12-M 2.48 0.01 2.56 2.48 6.50-6 -6 2.86 SNMG 432 C6-DSDNN-00065-15-M 2.48 0.02 2.56 2.48 6.50-6 -6 2.86 SNMG 543 C6-DSDNN-00065-19-M 2.48 0.02 2.56 2.48 6.50-6 -6 2.86 SNMG 643 1.0 C8-DSDNN-00080-25-09 3.15 0.02 3.15 3.15 9.84-5 -9 5.51 SNMG 866 Spare Parts, Parts included in delivery Anvil Anvil screw Clamp set Key Optional anvil* Toolholder/ Insert dimension -09 DSN 322.5 C03007-T09P CD09-S09 T09P-2-12 DSN 444* C04008-T15P CD12-S12 T15P-2 DSN 434-15 DSN 546 C05010-T20P CD16-S16 T20P-7L -19 DSN 646 C05010-T20P CD19-S19 T20P-7L -25-09 DSN 836** C06012-T25P CD25-S25 T25P-7 DSN 846 Please check availability in current price and stock-list * Anvil DSN 434 for insert SN..44. to be ordered separately. **Anvil DSN 846 for insert SN..85. to be ordered separately. 24

010-033 SecoCaptoDStyle.fm Page 25 Thursday, February 11, 2010 1:19 PM Seco-Capto Toolholders, external Toolholders for inserts SNGA, SNMA, SNMG, SNMM and SNMP DSKNR/L..-M Inserts, please see pages 59-62, 103, 105 γ o = Cutting rake, γ p = Back rake Right-hand version shown Application 75 Insert I.C. D 5m f 1 l 1 D m1 γ o γ p Gage insert 3/8 C4-DSKNR-27050-09-M 1.57 1.06 1.97 2.95-6 -6 0.88 SNMG 322 C4-DSKNL-27050-09-M 1.57 1.06 1.97 2.95-6 -6 0.88 SNMG 322 1/2 C4-DSKNR-27050-12-M 1.57 1.06 1.97 2.95-6 -6 0.88 SNMG 432 C4-DSKNL-27050-12-M 1.57 1.06 1.97 2.95-6 -6 0.88 SNMG 432 5/8 C4-DSKNR-27050-15-M 1.57 1.06 1.97 2.95-6 -6 0.88 SNMG 543 C4-DSKNL-27050-15-M 1.57 1.06 1.97 2.95-6 -6 0.88 SNMG 543 1/2 C5-DSKNR-35060-12-M 1.97 1.38 2.36 3.74-6 -6 1.76 SNMG 432 C5-DSKNL-35060-12-M 1.97 1.38 2.36 3.74-6 -6 1.76 SNMG 432 5/8 C5-DSKNL-35060-15-M 1.97 1.38 2.36 3.74-6 -6 1.76 SNMG 543 C5-DSKNR-35060-15-M 1.97 1.38 2.36 3.74-6 -6 1.76 SNMG 543 3/4 C5-DSKNR-35060-19-M 1.97 1.38 2.36 3.74-6 -6 1.76 SNMG 643 C5-DSKNL-35060-19-M 1.97 1.38 2.36 3.74-6 -6 1.76 SNMG 643 Spare Parts, Parts included in delivery Anvil Anvil screw Clamp set Key Optional anvil* Toolholder/ Insert dimension -09 DSN 322.5 C03007-T09P CD09-S09 T09P-2-12 DSN 444* C04008-T15P CD12-S12 T15P-2 DSN 434-15 DSN 546 C05010-T20P CD16-S16 T20P-7L -19 DSN 646 C05010-T20P CD19-S19 T20P-7L Please check availability in current price and stock-list * Anvil DSN 434 for insert SN..44. to be ordered separately. 25

010-033 SecoCaptoDStyle.fm Page 26 Thursday, February 11, 2010 1:19 PM Seco-Capto Toolholders, external Toolholders for inserts SNGA, SNMA, SNMG, SNMM and SNMP DSKNR/L..-M, DSKNR/L Inserts, please see pages 59-62, 103, 105 γ o = Cutting rake, γ p = Back rake Right-hand version shown Application 75 Insert I.C. D 5m f 1 l 1 D m1 γ o γ p Gage insert 1/2 C6-DSKNR-45065-12-M 2.48 1.77 2.56 4.76-6 -6 3.30 SNMG 432 C6-DSKNL-45065-12-M 2.48 1.77 2.56 4.76-6 -6 3.30 SNMG 432 5/8 C6-DSKNR-45065-15-M 2.48 1.77 2.56 4.76-6 -6 3.30 SNMG 543 C6-DSKNL-45065-15-M 2.48 1.77 2.56 4.76-6 -6 3.30 SNMG 543 3/4 C6-DSKNR-45065-19-M 2.48 1.77 2.56 4.76-6 -6 3.30 SNMG 643 C6-DSKNL-45065-19-M 2.48 1.77 2.56 4.76-6 -6 3.30 SNMG 643 3/4 C8-DSKNR-55080-19 3.15 2.16 3.15 4.92-6 -6 5.51 SNMG 643 C8-DSKNL-55080-19 3.15 2.16 3.15 4.92-6 -6 5.51 SNMG 643 1.0 C8-DSKNR-55080-25-09 3.15 2.16 3.15 4.92-6 -6 5.51 SNMG 866 C8-DSKNL-55080-25-09 3.15 2.16 3.15 4.92-6 -6 5.51 SNMG 866 Spare Parts, Parts included in delivery Anvil Anvil screw Clamp set Key Optional anvil* Toolholder/ Insert dimension -12 DSN 444* C04008-T15P CD12-S12 T15P-2 DSN 434-15 DSN 546 C05010-T20P CD16-S16 T20P-7L -19 DSN 646 C05010-T20P CD19-S19 T20P-7L -25-09 DSN 836** C06012-T25P CD25-S25 T25P-7 Please check availability in current price and stock-list * Anvil DSN 434 for insert SN..44. to be ordered separately. **Anvil DSN 846 for insert SN..85. to be ordered separately. 26

010-033 SecoCaptoDStyle.fm Page 27 Thursday, February 11, 2010 1:19 PM Seco-Capto Toolholders, external Toolholders for inserts TNGA, TNMA, TNMG, TNMM, TNMP and TNMX DTJNR/L..-M Inserts, please see pages 71-75, 110 γ o = Cutting rake, γ p = Back rake Right-hand version shown Application 93 Insert I.C. D 5m f 1 l 1 D m1 D m2 γ o γ p Gage insert 3/8 C4-DTJNR-27050-16-M 1.57 1.06 1.97 2.95 6.50-6 -6 0.88 TNMG 332 C4-DTJNL-27050-16-M 1.57 1.06 1.97 2.95 6.50-6 -6 0.88 TNMG 332 1/2 C4-DTJNR-27050-22-M 1.57 1.06 1.97 2.95 6.50-6 -6 0.88 TNMG 432 C4-DTJNL-27050-22-M 1.57 1.06 1.97 2.95 6.50-6 -6 0.88 TNMG 432 3/8 C5-DTJNR-35060-16-M 1.97 1.38 2.36 3.74 6.50-6 -6 1.76 TNMG 332 C5-DTJNL-35060-16-M 1.97 1.38 2.36 3.74 6.50-6 -6 1.76 TNMG 332 1/2 C5-DTJNR-35060-22-M 1.97 1.38 2.36 3.74 6.50-6 -6 1.76 TNMG 432 C5-DTJNL-35060-22-M 1.97 1.38 2.36 3.74 6.50-6 -6 1.76 TNMG 432 3/8 C6-DTJNR-45065-16-M 2.48 1.77 2.56 4.76 6.50-6 -6 3.08 TNMG 332 C6-DTJNL-45065-16-M 2.48 1.77 2.56 4.76 6.50-6 -6 3.08 TNMG 332 1/2 C6-DTJNR-45065-22-M 2.48 1.77 2.56 4.76 6.50-6 -6 3.08 TNMG 432 C6-DTJNL-45065-22-M 2.48 1.77 2.56 4.76 6.50-6 -6 3.08 TNMG 432 Spare Parts, Parts included in delivery Anvil Anvil screw Clamp set Key Toolholder/ Insert dimension -16 DTN 322.5 C03007-T09P CD09-S09 T09P-2-22 DTN 444 C04008-T15P CD12-S12 T15P-2 Please check availability in current price and stock-list 27

010-033 SecoCaptoDStyle.fm Page 28 Thursday, February 11, 2010 1:19 PM Seco-Capto Toolholders, external Toolholders for inserts TNGA, TNMA, TNMG, TNMM and TNMP DTGNR/L..-M Inserts, please see pages 71-74 γ o = Cutting rake, γ p = Back rake Right-hand version shown Application 90 Insert I.C. D 5m f 1 l 1 D m1 D m2 γ o γ p Gage insert 3/8 C4-DTGNR-27050-16-M 1.57 1.06 1.97 2.95 6.50-6 -6 0.88 TNMG 332 C4-DTGNL-27050-16-M 1.57 1.06 1.97 2.95 6.50-6 -6 0.88 TNMG 332 1/2 C4-DTGNR-27050-22-M 1.57 1.06 1.97 2.95 6.50-6 -6 0.88 TNMG 432 C4-DTGNL-27050-22-M 1.57 1.06 1.97 2.95 6.50-6 -6 0.88 TNMG 432 3/8 C5-DTGNR-35060-16-M 1.97 1.38 2.36 3.74 6.50-6 -6 1.76 TNMG 332 C5-DTGNL-35060-16-M 1.97 1.38 2.36 3.74 6.50-6 -6 1.76 TNMG 332 1/2 C5-DTGNR-35060-22-M 1.97 1.38 2.36 3.74 6.50-6 -6 1.76 TNMG 432 C5-DTGNL-35060-22-M 1.97 1.38 2.36 3.74 6.50-6 -6 1.76 TNMG 432 3/8 C6-DTGNR-45065-16-M 2.48 1.77 2.56 4.76 6.50-6 -6 3.08 TNMG 332 C6-DTGNL-45065-16-M 2.48 1.77 2.56 4.76 6.50-6 -6 3.08 TNMG 332 1/2 C6-DTGNR-45065-22-M 2.48 1.77 2.56 4.76 6.50-6 -6 3.08 TNMG 432 C6-DTGNL-45065-22-M 2.48 1.77 2.56 4.76 6.50-6 -6 3.08 TNMG 432 5/8 C6-DTGNR-45065-27-M 2.48 1.77 2.56 4.76 6.50-6 -6 3.08 TNMG 543 C6-DTGNL-45065-27-M 2.48 1.77 2.56 4.76 6.50-6 -6 3.08 TNMG 543 Spare Parts, Parts included in delivery Anvil Anvil screw Clamp set Key Toolholder/ Insert dimension -16 DTN 322.5 C03007-T09P CD09-S09 T09P-2-22 DTN 444 C04008-T15P CD12-S12 T15P-2-27 DTN 534 C05010-T20P CD16-S16 T20P-7L Please check availability in current price and stock-list 28

010-033 SecoCaptoDStyle.fm Page 29 Thursday, February 11, 2010 1:19 PM Seco-Capto Toolholders, external Toolholders for inserts TNGA, TNMA, TNMG, TNMM and TNMP DTFNR/L..-M Inserts, please see pages 71-74 γ o = Cutting rake, γ p = Back rake Right-hand version shown Application 90 Insert I.C. D 5m f 1 l 1 D m1 D m2 γ o γ p Gage insert 3/8 C4-DTFNR-27050-16-M 1.57 1.06 1.97 2.95 6.50-5 -6 0.88 TNMG 332 C4-DTFNL-27050-16-M 1.57 1.06 1.97 2.95 6.50-5 -6 0.88 TNMG 332 1/2 C4-DTFNR-27050-22-M 1.57 1.06 1.97 2.95 6.50-5 -6 0.88 TNMG 432 C4-DTFNL-27050-22-M 1.57 1.06 1.97 2.95 6.50-5 -6 0.88 TNMG 432 3/8 C5-DTFNR-35060-16-M 1.97 1.38 2.36 3.74 6.50-5 -6 1.76 TNMG 332 C5-DTFNL-35060-16-M 1.97 1.38 2.36 3.74 6.50-5 -6 1.76 TNMG 332 1/2 C5-DTFNR-35060-22-M 1.97 1.38 2.36 3.74 6.50-5 -6 1.76 TNMG 432 C5-DTFNL-35060-22-M 1.97 1.38 2.36 3.74 6.50-5 -6 1.76 TNMG 432 3/8 C6-DTFNR-45065-16-M 2.48 1.77 2.56 4.76 6.50-5 -6 3.08 TNMG 332 C6-DTFNL-45065-16-M 2.48 1.77 2.56 4.76 6.50-5 -6 3.08 TNMG 332 1/2 C6-DTFNR-45065-22-M 2.48 1.77 2.56 4.76 6.50-5 -6 3.08 TNMG 432 C6-DTFNL-45065-22-M 2.48 1.77 2.56 4.76 6.50-5 -6 3.08 TNMG 432 5/8 C6-DTFNR-45065-27-M 2.48 1.77 2.56 4.76 6.50-5 -6 3.08 TNMG 543 C6-DTFNL-45065-27-M 2.48 1.77 2.56 4.76 6.50-5 -6 3.08 TNMG 543 Spare Parts, Parts included in delivery Anvil Anvil screw Clamp set Key Toolholder/ Insert dimension -16 DTN 322.5 C03007-T09P CD09-S09 T09P-2-22 DTN 444 C04008-T15P CD12-S12 T15P-2-27 DTN 534 C05010-T20P CD16-S16 T20P-7L Please check availability in current price and stock-list 29

010-033 SecoCaptoDStyle.fm Page 30 Thursday, February 11, 2010 1:19 PM Seco-Capto Toolholders, external Toolholders for inserts VNMU PVJNR/L Inserts, please see page 83 γ o = Cutting rake, γ p = Back rake Right-hand version shown Application 93 Insert I.C. D 5m f 1 l 1 D m1 D m2 γ o γ p Gage insert 5/16 C4-PVJNR-27050-13 1.57 1.06 1.97 2.95 6.50-4.5-13.5 0.88 VNMU 2.531 C4-PVJNL-27050-13 1.57 1.06 1.97 2.95 6.50-4.5-13.5 0.88 VNMU 2.531 C5-PVJNR-35060-13 1.97 1.38 2.36 3.74 6.50-4.5-13.5 1.76 VNMU 2.531 C5-PVJNL-35060-13 1.97 1.38 2.36 3.74 6.50-4.5-13.5 1.76 VNMU 2.531 Spare Parts, Parts included in delivery Anvil Pin/ Key Toolholder/ Insert dimension -13 PVN 2.522 PL1403-T09P T09P-2 Please check availability in current price and stock-list 30

010-033 SecoCaptoDStyle.fm Page 31 Thursday, February 11, 2010 1:19 PM Seco-Capto Toolholders, external Toolholders for inserts VNGA, VNGP, VNGM, VNMA, VNMP and VNMG DVJNR/L..-M Inserts, please see pages 82-83, 117-118 γ o = Cutting rake, γ p = Back rake Right-hand version shown Application 93 Insert I.C. D 5m f 1 l 1 D m1 D m2 γ o γ p Gage insert 3/8 C4-DVJNL-27050-16 1.57 1.06 1.97 2.95 6.50-4.5-13.5 0.88 VNMG 332 C4-DVJNR-27050-16 1.57 1.06 1.97 2.95 6.50-4.5-13.5 0.88 VNMG 332 C5-DVJNR-35060-16 1.97 1.38 2.36 3.74 6.50-4.5-13.5 1.76 VNMG 332 C5-DVJNL-35060-16 1.97 1.38 2.36 3.74 6.50-4.5-13.5 1.76 VNMG 332 C6-DVJNR-45065-16 2.48 1.77 2.56 4.76 6.50-4.5-13.5 3.08 VNMG 332 C6-DVJNL-45065-16 2.48 1.77 2.56 4.76 6.50-4.5-13.5 3.08 VNMG 332 Spare Parts, Parts included in delivery Anvil Anvil screw Clamp set Key Toolholder/ Insert dimension -16 DVN 322.5 C03508-T15P CD19-V16 T15P-2 Please check availability in current price and stock-list 31

010-033 SecoCaptoDStyle.fm Page 32 Thursday, February 11, 2010 1:19 PM Seco-Capto Toolholders, external Toolholders for inserts WNGP, WNMA, WNMG, WNMP and WNMM DWLNR/L Inserts, please see pages 85-87, 118-119 γ o = Cutting rake, γ p = Back rake Right-hand version shown Application 95 Insert I.C. D 5m f 1 l 1 D m1 D m2 γ o γ p Gage insert 3/8 C4-DWLNR-27050-06 1.57 1.05 1.97 2.36 5.51-6 -6 0.88 WNMG 332 C4-DWLNL-27050-06 1.57 1.05 1.97 2.36 5.51-6 -6 0.88 WNMG 332 1/2 C4-DWLNR-27050-08 1.57 1.05 1.97 4.33 5.51-6 -6 0.88 WNMG 432 C4-DWLNL-27050-08 1.57 1.05 1.97 4.33 5.51-6 -6 0.88 WNMG 432 3/8 C5-DWLNR-35060-06 1.97 1.38 2.36 2.56 6.50-6 -6 1.76 WNMG 332 C5-DWLNL-35060-06 1.97 1.38 2.36 2.56 6.50-6 -6 1.76 WNMG 332 1/2 C5-DWLNR-35060-08 1.97 1.38 2.36 4.33 6.50-6 -6 1.76 WNMG 432 C5-DWLNL-35060-08 1.97 1.38 2.36 4.33 6.50-6 -6 1.76 WNMG 432 3/8 C6-DWLNR-45065-06 2.48 1.77 2.56 3.19 7.48-6 -6 3.08 WNMG 332 C6-DWLNL-45065-06 2.48 1.77 2.56 3.19 7.48-6 -6 3.08 WNMG 332 1/2 C6-DWLNR-45065-08 2.48 1.77 2.56 4.33 7.48-6 -6 3.08 WNMG 432 C6-DWLNL-45065-08 2.48 1.77 2.56 4.33 7.48-6 -6 3.08 WNMG 432 Spare Parts, Parts included in delivery Anvil Anvil screw Clamp set Key Optional anvil* Toolholder/ Insert dimension -06 WAE 323 C03007-T09P CD09-S09 T09P-2-08 WAE 433* C04008-T15P CD12-S12 T15P-2 WAI 423 Please check availability in current price and stock-list *Anvil WAI 423 for insert WN..44., to be ordered separately 32

010-033 SecoCaptoDStyle.fm Page 33 Thursday, February 11, 2010 1:19 PM Seco-Capto Toolholders, external Toolholders for inserts WNGA, WNGP, WNMA, WNMG, WNMP and WNMM PWLNR/L Inserts, please see pages 85-87, 118-119 γ o = Cutting rake, γ p = Back rake Right-hand version shown Application 95 Insert I.C. D 5m f 1 l 1 D m1 D m2 γ o γ p Gage insert 3/8 C4-PWLNR-27050-06 1.57 1.06 1.97 2.95 6.50-6 -6 0.88 WNMG 332 C4-PWLNL-27050-06 1.57 1.06 1.97 2.95 6.50-6 -6 0.88 WNMG 332 1/2 C4-PWLNR-27050-08 1.57 1.06 1.97 2.95 6.50-6 -6 0.88 WNMG 432 C4-PWLNL-27050-08 1.57 1.06 1.97 2.95 6.50-6 -6 0.88 WNMG 432 3/8 C5-PWLNR-35060-06 1.97 1.38 2.36 3.74 6.50-6 -6 1.76 WNMG 332 C5-PWLNL-35060-06 1.97 1.38 2.36 3.74 6.50-6 -6 1.76 WNMG 332 1/2 C5-PWLNR-35060-08 1.97 1.38 2.36 3.74 6.50-6 -6 1.76 WNMG 432 C5-PWLNL-35060-08 1.97 1.38 2.36 3.74 6.50-6 -6 1.76 WNMG 432 C6-PWLNR-45065-08 2.48 1.77 2.56 4.76 6.50-6 -6 3.08 WNMG 432 C6-PWLNL-45065-08 2.48 1.77 2.56 4.76 6.50-6 -6 3.08 WNMG 432 Spare Parts, Parts included in delivery Anvil Pin/ Key* Wedge Locking screw/ Key Screw Toolholder/ Insert dimension -06 WAE 323 PP2109-T09P T09P-2 WNW06HD WS1920-T20P T20P-7 L82511-T07P -08 WAE 433** PP2015-1-T15P T15P-2 WNW08HD*** WS2325-T25P T25P-7 L82511-T07P Please check availability in current price and stock-list *To be ordered separately **Anvil WAI 423 for insert WN..44., to be ordered separately ***Wedge WNW08 for insert WNMM 4.. to be ordered separately 33

Turning 34 034 Turning Inserts Beauty.indd 34 2/12/2010 7:34:06 AM

035-087 TP0500 Inserts.fm Page 35 Thursday, February 11, 2010 12:31 PM Turning Inserts CCGT Tolerances: I.C = ±.001 s = ±.005 rε = ±.004 Size I.C. s h rε 21.5 1/4 3/32.114 1/512-1/64 32.5 3/8 5/32.177 1/64-1/32 43 1/2 3/16.217 1/64-1/32 Grades Coated Uncoated Cermet Inserts CCGT-AL TP0500 TP1000 TP1500 TP2000 TP2500 TP3000 TP3500 TP200 TP40 TM2000 TM4000 TS2000 TS2500 TK1000 TK2000 CP25 CP200 CP250 CP500 HX KX S25M 370 883 890 CCGT 21.50.5F-AL [ 21.51F-AL [ CMP CM CCGT 32.50.5-AL [ 32.51F-AL [ 32.52F-AL [ CCGT-F1 CCGT 431F-AL [ 432F-AL [ CCGT 21.50.0-F1 [ 21.50-F1 [ CCGT 32.50-F1 [ CCGT-UX Right-hand version shown CCGT 21.51L-UX [ 21.51R-UX [ CCGT 32.51L-UX [ 32.51R-UX [ [ Stock standard Subject to change refer to current price and stock-list 35

035-087 TP0500 Inserts.fm Page 36 Thursday, February 11, 2010 12:31 PM Turning Inserts CCMT Tolerances: s = ±.005 rε = ±.004 Size I.C. s h rε 21.5 1/4 3/32.114 1/128-1/32 32 3/8 1/8.177 1/64 32.5 3/8 5/32.177 1/128-1/32 43 1/2 3/16.217 1/64-3/64 53.5 5/8 7/32.217 1/32-3/64 86 1 3/8.342 3/32 Grades Coated Uncoated Cermet Inserts CCMT-FF1 CCMT-F1 CCMT 21.50.5-FF1 [ 21.51-FF1 [ [ TP0500 TP1000 TP1500 TP2000 TP2500 TP3000 TP3500 TP200 TP40 TM2000 TM4000 TS2000 TS2500 TK1000 TK2000 CP25 CP200 CP250 CP500 HX KX S25M 370 883 890 CCMT 32.50.5-FF1 [ [ 32.51-FF1 [ 32.52-FF1 [ CCMT 21.50.5-F1 [ [ [ [ [ [ [ [ [ [ [ 21.51-F1 [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ 21.52-F1 [ [ [ [ [ [ [ [ [ [ [ [ CMP CM CCMT 32.50.5-F1 [ [ [ [ [ [ [ [ [ [ [ 32.51-F1 [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ 32.52-F1 [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ CCMT...W-F1 CCMT 431-F1 [ [ [ [ [ [ [ 432-F1 [ [ [ [ [ [ [ [ [ [ 433-F1 [ [ [ [ CCMT 21.51W-F1 [ [ [ [ CCMT 32.51W-F1 [ [ [ [ 32.52W-F1 [ [ [ [ CCMT-F2 CCMT 431W-F1 [ [ 432W-F1 [ [ CCMT 21.50.5-F2 [ [ [ [ [ [ [ [ [ [ 21.51-F2 [ [ [ [ [ [ [ [ [ [ [ [ [ 21.52-F2 [ [ [ [ [ [ [ [ [ [ [ [ [ CCMT 321-F2 [ [ CCMT 32.50.5-F2 [ [ [ [ [ [ 32.51-F2 [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ 32.52-F2 [ [ [ [ [ [ [ [ [ [ [ [ [ CCMT 32.53-F2 [ [ CCMT 431-F2 [ [ [ [ [ [ [ [ [ [ [ 432-F2 [ [ [ [ [ [ [ [ [ [ [ [ [ 433-F2 [ [ [ [ [ [ [ [ CCMT 53.52-F2 [ [ [ [ 53.53-F2 [ [ CCMT 866-F2 [ [ [ Stock standard Subject to change refer to current price and stock-list 36

035-087 TP0500 Inserts.fm Page 37 Thursday, February 11, 2010 12:31 PM Turning Inserts CCMT Inserts CCMT...W-F2 Grades Coated Uncoated Cermet TP0500 TP1000 TP1500 TP2000 TP2500 TP3000 TP3500 TP200 TP40 TM2000 TM4000 TS2000 TS2500 TK1000 TK2000 CP25 CP200 CP250 CP500 HX KX S25M 370 883 890 CCMT 32.52W-F2 [ [ [ CMP CM CCMT 432W-F2 [ 433W-F2 [ [ Stock standard Subject to change refer to current price and stock-list 37

035-087 TP0500 Inserts.fm Page 38 Thursday, February 11, 2010 12:31 PM Turning Inserts CDCB Tolerances: I.C. = ±.001 s = ±.001 rε = ±.001 Size I.C. s h rε 1.2 5/32.040.083 1/512-1/64 Grades Coated Uncoated Cermet Inserts CDCB TP0500 TP1000 TP1500 TP2000 TP2500 TP3000 TP3500 TP200 TP40 TM2000 TM4000 TS2000 TS2500 TK1000 TK2000 CP25 CP200 CP250 CP500 HX KX S25M 370 883 890 CDCB 1.21.20 [ [ [ 1.21.20.5 [ [ [ 1.21.21 [ [ [ CMP CM CNGP Tolerances: I.C. = ±.001 s = ±.005 rε = ±.004 Size I.C. s h rε 43 1/2 3/16.203 1/512-1/32 Grades Coated Uncoated Cermet Inserts CNGP-MF1 CNGP-M1 TP0500 TP1000 TP1500 TP2000 TP2500 TP3000 TP3500 TP200 TP40 TM2000 TM4000 TS2000 TS2500 TK1000 TK2000 CP25 CP200 CP250 CP500 HX KX S25M 370 883 890 CNGP 430.0-MF1 [ CNGP 430-MF1 [ 430F-MF1 [ 430.5-MF1 [ [ 430.5F-MF1 [ [ 431-MF1 [ [ 431F-MF1 [ [ 432-MF1 [ [ 432F-MF1 [ [ CNGP 430.5F-M1 [ 430.5-M1 [ [ 431-M1 [ [ 432F-M1 [ 432-M1 [ CMP CM [ Stock standard Subject to change refer to current price and stock-list 38

035-087 TP0500 Inserts.fm Page 39 Thursday, February 11, 2010 12:31 PM Turning Inserts CNMA, CNMG, CNMM, CNMP Tolerances: s = ±.005 rε = ±.004 Size I.C. s h rε 32 3/8 1/8.150 1/32 43 1/2 3/16.203 1/64-1/16 44 1/2 1/4.203 1/32-1/16 54 5/8 1/4.253 1/32-1/16 64 3/4 1/4.313 1/32-3/32 86 1 3/8.359 3/32 Grades Coated Uncoated Cermet Inserts CNMA TP0500 TP1000 TP1500 TP2000 TP2500 TP3000 TP3500 TP200 TP40 TM2000 TM4000 TS2000 TS2500 TK1000 TK2000 CP25 CP200 CP250 CP500 HX KX S25M 370 883 890 CNMA 431 [ 432 [ [ 432F [ 433 [ [ 434 [ [ CMP CM CNMA 542 [ 543 [ [ 544 [ CNMG-FF1 CNMA 643 [ [ 643F [ 644 [ CNMG 431-FF1 [ [ 432-FF1 [ [ [ [ CNMG-MF2 CNMG...W-MF2 CNMG-MF3 CNMG-MF4 CNMG 321-MF2 [ 322-MF2 [ CNMG 431-MF2 [ [ [ [ [ [ [ [ [ 432-MF2 [ [ [ [ [ [ [ [ [ 433-MF2 [ [ [ [ [ [ CNMG 431W-MF2 [ [ [ [ [ [ 432W-MF2 [ [ [ [ [ [ 433W-MF2 [ CNMG 431-MF3 [ [ [ 432-MF3 [ [ [ [ [ 433-MF3 [ [ [ [ CNMG 543-MF3 [ [ CNMG 431-MF4 [ [ [ [ [ 432-MF4 [ [ [ [ [ [ [ [ 433-MF4 [ [ [ [ [ [ 434-MF4 [ [ CNMG 542-MF4 [ [ 543-MF4 [ [ CNMG 643-MF4 [ [ [ Stock standard Subject to change refer to current price and stock-list 39

035-087 TP0500 Inserts.fm Page 40 Thursday, February 11, 2010 12:31 PM Turning Inserts CNMA, CNMG, CNMM, CNMP Grades Coated Uncoated Cermet Inserts CNMG-MF5 TP0500 TP1000 TP1500 TP2000 TP2500 TP3000 TP3500 TP200 TP40 TM2000 TM4000 TS2000 TS2500 TK1000 TK2000 CP25 CP200 CP250 CP500 HX KX S25M 370 883 890 CNMG 432-MF5 [ [ [ [ [ [ [ [ [ [ 433-MF5 [ [ [ [ [ [ [ [ [ [ 434-MF5 [ [ [ [ CMP CM CNMG...W-MF5 CNMG 432W-MF5 [ [ [ [ [ [ CNMG-M2 CNMG 432-M2 [ [ [ CNMG-M3 CNMG 321-M3 [ [ 322-M3 [ [ [ CNMG 431-M3 [ [ [ [ [ [ [ [ 431-M3(O) [ 432-M3 [ [ [ [ [ [ [ [ [ 432-M3(O) [ 433-M3 [ [ [ [ [ [ [ [ [ 433-M3(O) [ 434-M3 [ [ [ [ CNMG 542-M3 [ [ [ [ [ [ 543-M3 [ [ [ [ [ [ 544-M3 [ [ [ CNMG...W-M3 CNMG 642-M3 [ [ [ [ [ [ 643-M3 [ [ [ [ [ [ 644-M3 [ [ [ CNMG 432W-M3 [ [ [ [ [ [ 433W-M3 [ [ [ [ CNMG-M5 CNMG 431-M5 [ [ [ [ [ [ [ [ 432-M5 [ [ [ [ [ [ [ [ [ [ [ [ [ 433-M5 [ [ [ [ [ [ [ [ [ [ [ [ [ 434-M5 [ [ [ [ [ [ [ [ CNMG 542-M5 [ [ [ [ [ [ [ 543-M5 [ [ [ [ [ [ [ [ [ [ [ [ [ 544-M5 [ [ [ [ [ [ [ [ [ [ [ [ CNMG-MR3 CNMG 642-M5 [ [ [ [ [ [ [ 643-M5 [ [ [ [ [ [ [ [ [ [ [ 644-M5 [ [ [ [ [ [ [ [ [ [ [ CNMG 432-MR3 [ [ [ [ 433-MR3 [ [ [ [ [ Stock standard Subject to change refer to current price and stock-list 40

035-087 TP0500 Inserts.fm Page 41 Thursday, February 11, 2010 12:31 PM Turning Inserts CNMA, CNMG, CNMM, CNMP Grades Coated Uncoated Cermet Inserts CNMG-MR4 TP0500 TP1000 TP1500 TP2000 TP2500 TP3000 TP3500 TP200 TP40 TM2000 TM4000 TS2000 TS2500 TK1000 TK2000 CP25 CP200 CP250 CP500 HX KX S25M 370 883 890 CNMG 431-MR4 [ [ 432-MR4 [ [ [ 433-MR4 [ [ [ 434-MR4 [ [ [ CMP CM CNMG 542-MR4 [ [ [ 543-MR4 [ [ [ CNMG 643-MR4 [ [ [ 644-MR4 [ CNMG-MR6 CNMG 866-MR4 [ CNMG 432-MR6 [ [ [ [ 433-MR6 [ [ [ [ 434-MR6 [ [ [ [ 442-MR6 [ [ [ 443-MR6 [ 444-MR6 [ [ [ [ CNMG 543-MR6 [ [ [ [ 544-MR6 [ [ [ [ 546-MR6 [ [ [ [ CNMG-MR7 CNMG 643-MR6 [ [ [ [ 644-MR6 [ [ [ 646-MR6 [ [ [ CNMG 432-MR7 [ [ [ [ [ [ [ [ [ 433-MR7 [ [ [ [ [ [ [ [ [ 434-MR7 [ [ [ [ [ [ [ [ CNMG 542-MR7 [ [ [ [ 543-MR7 [ [ [ [ [ [ [ [ [ [ 544-MR7 [ [ [ [ [ [ [ [ [ [ 546-MR7 [ [ CNMG 642-MR7 [ [ [ 643-MR7 [ [ [ [ [ [ [ [ [ [ 644-MR7 [ [ [ [ [ [ [ [ [ 646-MR7 [ [ CNMM-MR6 CNMG 866-MR7 [ [ [ [ [ [ CNMM 543-MR6 [ [ [ [ 544-MR6 [ [ [ [ 546-MR6 [ [ [ [ CNMM 643-MR6 [ [ [ 644-MR6 [ [ [ 646-MR6 [ [ [ [ Stock standard Subject to change refer to current price and stock-list 41

035-087 TP0500 Inserts.fm Page 42 Thursday, February 11, 2010 12:31 PM Turning Inserts CNMA, CNMG, CNMM, CNMP Grades Coated Uncoated Cermet Inserts CNMM-R4 TP0500 TP1000 TP1500 TP2000 TP2500 TP3000 TP3500 TP200 TP40 TM2000 TM4000 TS2000 TS2500 TK1000 TK2000 CP25 CP200 CP250 CP500 HX KX S25M 370 883 890 CNMM 432-R4 [ [ [ [ [ [ [ 433-R4 [ [ [ [ [ [ [ [ [ 434-R4 [ [ [ [ CMP CM CNMM 543-R4 [ [ [ [ [ [ [ [ 544-R4 [ [ [ [ [ [ [ CNMM...W-R4 CNMM-R5 CNMM-R6 CNMM 643-R4 [ [ [ [ [ [ [ 644-R4 [ [ [ [ [ [ [ [ 646-R4 [ [ [ [ [ [ [ CNMM 432W-R4 [ [ [ [ 433W-R4 [ [ [ [ 434W-R4 [ [ [ CNMM 544W-R4 [ [ CNMM 544-R5 [ [ [ [ [ [ CNMM 643-R5 [ 644-R5 [ [ [ [ [ [ 646-R5 [ [ [ [ [ CNMM 432-R6 [ [ [ [ 433-R6 [ [ CNMM 543-R6 [ [ [ CNMM-R7 CNMM...W-R7 CNMM 643-R6 [ [ [ 644-R6 [ CNMM 543-R7 [ [ [ [ 544-R7 [ [ [ [ 546-R7 [ [ [ CNMM 643-R7 [ [ [ [ [ 644-R7 [ [ [ [ [ [ 646-R7 [ [ [ [ [ CNMM 644W-R7 [ [ [ [ [ 646W-R7 [ [ CNMM-R8 CNMM 433-R8 [ CNMM 644-R8 [ [ [ Stock standard Subject to change refer to current price and stock-list 42

035-087 TP0500 Inserts.fm Page 43 Thursday, February 11, 2010 12:31 PM Turning Inserts CNMA, CNMG, CNMM, CNMP Grades Coated Uncoated Cermet Inserts CNMM-RR6 CNMM 432-RR6 [ [ [ 433-RR6 [ [ TP0500 TP1000 TP1500 TP2000 TP2500 TP3000 TP3500 TP200 TP40 TM2000 TM4000 TS2000 TS2500 TK1000 TK2000 CP25 CP200 CP250 CP500 HX KX S25M 370 883 890 CMP CM CNMM 543-RR6 [ [ [ 544-RR6 [ [ [ [ [ CNMM-RR9 CNMM 643-RR6 [ [ [ [ 644-RR6 [ [ [ [ [ [ 646-RR6 [ [ [ CNMM 644-RR9 [ CNMM-57 CNMM 643-57 [ [ 644-57 [ [ 646-57 [ [ CNMP-MF1 CNMP 431-MF1 [ [ [ [ [ [ 432-MF1 [ [ [ [ [ [ CNMP-M1 CNMP 431-M1 [ [ [ 432-M1 [ [ [ 433-M1 [ CNMP 542-M1 [ 543-M1 [ CNMP 642-M1 [ [ 643-M1 [ [ Stock standard Subject to change refer to current price and stock-list 43

035-087 TP0500 Inserts.fm Page 44 Thursday, February 11, 2010 12:31 PM Turning Inserts CPMT Tolerances: s = ±.005 rε = ±.004 Size I.C. s h rε 21.5 1/4 3/32.114 1/256-1/32 32.5 3/8 5/32.177 1/256-1/32 Grades Coated Uncoated Cermet Inserts CPMT-F1 TP0500 TP1000 TP1500 TP2000 TP2500 TP3000 TP3500 TP200 TP40 TM2000 TM4000 TS2000 TS2500 TK1000 TK2000 CP25 CP200 CP250 CP500 HX KX S25M 370 883 890 CPMT 21.50-F1 [ 21.50.5-F1 [ 21.51-F1 [ [ [ 21.52-F1 [ [ CMP CM CPMT 32.50-F1 [ 32.50.5-F1 [ 32.51-F1 [ [ [ 32.52-F1 [ [ [ Stock standard Subject to change refer to current price and stock-list 44

035-087 TP0500 Inserts.fm Page 45 Thursday, February 11, 2010 12:31 PM Turning Inserts DCGT Tolerances: I.C. =.001 s = ±.005 rε = ±.004 Size I.C. s h rε 21.5 1/4 3/32.114 1/512-1/64 32.5 3/8 5/32.177 1/256-1/32 Grades Coated Uncoated Cermet Inserts DCGT-AL DCGT-F1 TP0500 TP1000 TP1500 TP2000 TP2500 TP3000 TP3500 TP200 TP40 TM2000 TM4000 TS2000 TS2500 TK1000 TK2000 CP25 CP200 CP250 CP500 HX KX S25M 370 883 890 DCGT 21.50.5-AL [ 21.51F-AL [ DCGT 32.50.5F-AL [ 32.51F-AL [ 32.52F-AL [ DCGT 21.50.0-F1 [ 21.50-F1 [ CMP CM DCGT 32.50-F1 [ [ Stock standard Subject to change refer to current price and stock-list 45

035-087 TP0500 Inserts.fm Page 46 Thursday, February 11, 2010 12:31 PM Turning Inserts DCMT Tolerances: s = ±.005 rε = ±.004 Size I.C. s h rε 21.5 1/4 3/32.114 1/128-1/32 32.5 3/8 5/32.177 1/128-1/32 43 1/2 3/16.220 1/64-3/64 Grades Coated Uncoated Cermet Inserts DCMT-FF1 DCMT-F1 DCMT-F2 TP0500 TP1000 TP1500 TP2000 TP2500 TP3000 TP3500 TP200 TP40 TM2000 TM4000 TS2000 TS2500 TK1000 TK2000 CP25 CP200 CP250 CP500 HX KX S25M 370 883 890 DCMT 21.51-FF1 [ [ DCMT 32.50.5-FF1 [ 32.51-FF1 [ 32.52-FF1 [ [ DCMT 21.50.5-F1 [ [ [ [ [ [ [ [ 21.51-F1 [ [ [ [ [ [ [ [ [ [ [ [ [ [ 21.52-F1 [ [ [ [ [ [ [ [ DCMT 32.50.5-F1 [ [ [ [ [ [ 32.51-F1 [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ 32.52-F1 [ [ [ [ [ [ [ [ [ [ [ [ [ 32.53-F1 [ [ [ [ DCMT 21.50.5-F2 [ [ [ [ [ [ [ [ 21.51-F2 [ [ [ [ [ [ [ [ [ [ [ 21.52-F2 [ [ [ [ [ [ [ [ [ [ CMP CM DCMT 32.50.5-F2 [ [ [ [ [ 32.51-F2 [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ 32.52-F2 [ [ [ [ [ [ [ [ [ [ [ [ [ DCMT 431-F2 [ [ [ [ [ [ [ [ [ 432-F2 [ [ [ [ [ [ [ [ [ [ 433-F2 [ [ [ [ [ [ Stock standard Subject to change refer to current price and stock-list 46

035-087 TP0500 Inserts.fm Page 47 Thursday, February 11, 2010 12:31 PM Turning Inserts DCMX Tolerances: I.C. =.002 s = ±.005 rε = ±.004 Size I.C. s h rε 32.5 3/8 5/32.177 1/64-1/32 Grades Coated Uncoated Cermet Inserts DCMX...W-F1 TP0500 TP1000 TP1500 TP2000 TP2500 TP3000 TP3500 TP200 TP40 TM2000 TM4000 TS2000 TS2500 TK1000 TK2000 CP25 CP200 CP250 CP500 HX KX S25M 370 883 890 DCMX 32.51W-F1 [ [ [ [ 32.52W-F1 [ [ [ [ [ CMP CM [ Stock standard Subject to change refer to current price and stock-list 47

035-087 TP0500 Inserts.fm Page 48 Thursday, February 11, 2010 12:31 PM Turning Inserts DNGM, DNGP, DNMA, DNMG, DNMM, DNMP, DNMU Tolerances: s = ±.005 rε = ±.004 Size I.C. s h rε 33 3/8 3/16.150 1/64-3/64 43 1/2 3/16.203 1/128-3/64 44 1/2 1/4.203 1/64-1/16 54 5/8 1/4.253 1/32-3/64 Grades Coated Uncoated Cermet Inserts DNGM-MF1 TP0500 TP1000 TP1500 TP2000 TP2500 TP3000 TP3500 TP200 TP40 TM2000 TM4000 TS2000 TS2500 TK1000 TK2000 CP25 CP200 CP250 CP500 HX KX S25M 370 883 890 DNGM 431-MF1 [ 432-MF1 [ [ 442-MF1 [ [ 442F-MF1 [ [ CMP CM DNGP-M1 DNMA DNMG-FF1 DNGP 430.5-M1 [ 430.5F-M1 [ 431-M1 [ [ 432-M1 [ 432F-M1 [ DNMA 432 [ [ 433 [ 442 [ 443 [ 444 [ DNMG 431-FF1 [ 441-FF1 [ DNMG-MF2 DNMG-MF3 DNMG 431-MF2 [ [ [ [ [ [ [ 432-MF2 [ [ [ [ [ [ [ [ 433-MF2 [ [ [ [ 441-MF2 [ [ [ [ [ [ [ [ 441-MF2(O) 442-MF2 [ [ [ [ [ [ [ [ [ 442-MF2(O) 443-MF2 [ [ [ [ [ [ DNMG 431-MF3 [ [ 432-MF3 [ [ [ 433-MF3 [ [ [ DNMG 441-MF3 [ [ 442-MF3 [ [ [ [ Stock standard Subject to change refer to current price and stock-list 48

035-087 TP0500 Inserts.fm Page 49 Thursday, February 11, 2010 12:31 PM Turning Inserts DNGM, DNGP, DNMA, DNMG, DNMM, DNMP, DNMU Grades Coated Uncoated Cermet Inserts DNMG-MF4 DNMG-MF5 TP0500 TP1000 TP1500 TP2000 TP2500 TP3000 TP3500 TP200 TP40 TM2000 TM4000 TS2000 TS2500 TK1000 TK2000 CP25 CP200 CP250 CP500 HX KX S25M 370 883 890 DNMG 431-MF4 [ 432-MF4 [ [ [ 433-MF4 [ DNMG 441-MF4 [ [ 442-MF4 [ [ [ [ [ [ 443-MF4 [ [ [ [ DNMG 432-MF5 [ [ [ [ [ [ CMP CM DNMG 433-MF5 [ [ [ [ [ [ 442-MF5 [ [ [ [ [ [ [ [ DNMG 443-MF5 [ [ [ [ [ [ [ [ DNMG-M3 DNMG-M5 DNMG-MR3 DNMG-MR4 DNMG 431-M3 [ [ [ [ [ 431-M3(O) [ 432-M3 [ [ [ [ [ [ [ [ 432-M3(O) [ 433-M3 [ [ [ [ [ [ 441-M3 [ [ [ [ [ [ [ [ [ 442-M3 [ [ [ [ [ [ [ [ [ 443-M3 [ [ [ [ [ [ [ [ [ 444-M3 [ [ [ DNMG 431-M5 [ [ [ 432-M5 [ [ [ [ [ [ [ 433-M5 [ [ [ [ [ [ [ 441-M5 [ [ [ 442-M5 [ [ [ [ [ [ [ [ [ [ 443-M5 [ [ [ [ [ [ [ [ [ 444-M5 [ [ [ [ [ [ [ [ DNMG 542-M5 [ [ 543-M5 [ [ [ 543-M5(0) [ DNMG 432-MR3 [ [ [ 433-MR3 [ [ 442-MR3 [ [ [ [ 443-MR3 [ [ DNMG 432-MR4 [ [ [ 433-MR4 [ DNMG 542-MR4 [ 543-MR4 [ [ Stock standard Subject to change refer to current price and stock-list 49

035-087 TP0500 Inserts.fm Page 50 Thursday, February 11, 2010 12:31 PM Turning Inserts DNGM, DNGP, DNMA, DNMG, DNMM, DNMP, DNMU Grades Coated Uncoated Cermet Inserts DNMG-MR6 DNMG-MR7 DNMG-UX DNMG 432-MR6 [ [ [ 433-MR6 [ [ [ 442-MR6 [ [ [ [ 443-MR6 [ [ [ [ 444-MR6 [ [ [ TP0500 TP1000 TP1500 TP2000 TP2500 TP3000 TP3500 TP200 TP40 TM2000 TM4000 TS2000 TS2500 TK1000 TK2000 CP25 CP200 CP250 CP500 HX KX S25M 370 883 890 DNMG 432-MR7 [ [ [ 433-MR7 [ [ 442-MR7 [ [ [ [ [ 443-MR7 [ [ [ [ [ [ [ [ DNMG 441L-UX [ [ [ 441R-UX [ [ [ 442L-UX [ [ [ 442R-UX [ [ [ CMP CM Right-hand version shown DNMM-R4 DNMM 442-R4 [ [ [ [ [ [ 443-R4 [ [ [ [ [ [ 444-R4 [ [ [ [ DNMM-R6 DNMM 442-R6 [ [ 444-R6 [ DNMP-MF1 DNMP-M1 DNMP 431-MF1 [ [ [ 432-MF1 [ [ [ 441-MF1 [ [ [ [ [ [ 442-MF1 [ [ [ [ [ [ DNMP 431-M1 [ [ 432-M1 [ [ 433-M1 [ DNMP 543-M1 [ [ Stock standard Subject to change refer to current price and stock-list 50

035-087 TP0500 Inserts.fm Page 51 Thursday, February 11, 2010 12:31 PM Turning Inserts DNGM, DNGP, DNMA, DNMG, DNMM, DNMP, DNMU Grades Coated Uncoated Cermet Inserts DNMU-MF1 TP0500 TP1000 TP1500 TP2000 TP2500 TP3000 TP3500 TP200 TP40 TM2000 TM4000 TS2000 TS2500 TK1000 TK2000 CP25 CP200 CP250 CP500 HX KX S25M 370 883 890 DNMU 331-MF1 [ [ [ 332-MF1 [ CMP CM DNMU-MF2 DNMU 331-MF2 [ [ [ [ [ [ [ 332-MF2 [ [ [ [ [ [ [ [ DNMU-MF4 DNMU 331-MF4 [ [ 332-MF4 [ [ DNMU-MF5 DNMU 331-MF5 [ [ 332-MF5 [ [ 333-MF5 [ DNMU-M3 DNMU-M5 DNMU 330.5-M3 [ 331-M3 [ [ [ [ [ [ 332-M3 [ [ [ [ [ [ [ 333-M3 [ [ [ [ DNMU 332-M5 [ [ [ 333-M5 [ [ [ [ Stock standard Subject to change refer to current price and stock-list 51

035-087 TP0500 Inserts.fm Page 52 Thursday, February 11, 2010 12:31 PM Turning Inserts DNMX Tolerances: s = ±.005 rε = ±.004 Size I.C. s h rε 33 3/8 3/16.150 1/64-1/32 43 1/2 3/16.203 3/64 44 1/2 1/4.203 1/32-3/64 Grades Coated Uncoated Cermet Inserts DNMX...W-MF2 TP0500 TP1000 TP1500 TP2000 TP2500 TP3000 TP3500 TP200 TP40 TM2000 TM4000 TS2000 TS2500 TK1000 TK2000 CP25 CP200 CP250 CP500 HX KX S25M 370 883 890 DNMX 331W-MF2 [ [ [ [ 332W-MF2 [ [ [ [ CMP CM DNMX...W-M3 DNMX 442W-M3 [ [ [ 443W-M3 [ [ [ [ Stock standard Subject to change refer to current price and stock-list 52

035-087 TP0500 Inserts.fm Page 53 Thursday, February 11, 2010 12:31 PM Turning Inserts DPMT Tolerances: s = ±.005 rε = ±.004 Size I.C. s h r 32.5 3/8 5/32.177 1/128-1/32 Grades Coated Uncoated Cermet Inserts DPMT TP0500 TP1000 TP1500 TP2000 TP2500 TP3000 TP3500 TP200 TP40 TM2000 TM4000 TS2000 TS2500 TK1000 TK2000 CP25 CP200 CP250 CP500 HX KX S25M 370 883 890 DPMT 32.51-F1 [ 32.52-F1 [ CMP CM [ Stock standard Subject to change refer to current price and stock-list 53

035-087 TP0500 Inserts.fm Page 54 Thursday, February 11, 2010 12:31 PM Turning Inserts RCGS Tolerance: I.C. = ±.001 Size I.C. s 1.5 3/16 1/4 2 1/4 23/64 3 3/8 33/64 4 1/2 21/32 Grades Coated Uncoated Cermet Inserts RCGS-46 TP0500 TP1000 TP1500 TP2000 TP2500 TP3000 TP3500 TP200 TP40 TM2000 TM4000 TS2000 TS2500 TK1000 TK2000 CP25 CP200 CP250 CP500 HX KX S25M 370 883 890 RCGS 1.5-46 [ [ [ [ [ 1.5F-46 [ CMP CM RCGS 2-46 [ [ [ [ [ 2F-46 [ RCGS 3-46 [ [ [ [ [ 3F-46 [ RCGS-PS RCGS 4-46 [ [ [ [ [ 4F-46 [ RCGS 1.5-PS [ [ [ 1.5F-PS [ RCGS 2-PS [ [ [ 2F-PS [ [ RCGS 3-PS [ [ [ 3F-PS [ RCGS 4F-PS [ [ Stock standard Subject to change refer to current price and stock-list 54

035-087 TP0500 Inserts.fm Page 55 Thursday, February 11, 2010 12:31 PM Turning Inserts RCMM, RCMT Tolerance: s = ±.005 Size I.C. s h 0602.236 3/32.110 22.250 1/8.110 0803.315 1/8.134 32.5.375 5/32.154 10T3.393 5/32.173 1204.472 3/16.173 43-46.500 3/16.203 43-F1.500 3/16.173 54-46.625 1/4.253 1606.630 1/4.216 64-46.750 1/4.313 84-46 1.000 1/4.313 Grades Coated Uncoated Cermet Inserts RCMM-46 TP0500 TP1000 TP1500 TP2000 TP2500 TP3000 TP3500 TP200 TP40 TM2000 TM4000 TS2000 TS2500 TK1000 TK2000 CP25 CP200 CP250 CP500 HX KX S25M 370 883 890 RCMM 43-46 [ [ [ [ CMP CM RCMM 54-46 [ RCMM 64-46 [ [ [ [ RCMT-F1 RCMM 84-46 [ [ RCMT 22-F1(O) [ [ RCMT 32.5-F1 [ 32.5-F1(O) [ [ RCMT 43-F1 [ 43-F1(O) [ RCMT 0602M0-F1 [ [ [ RCMT 0803M0-F1 [ [ [ RCMT 10T3M0-F1 [ [ [ [ [ RCMT 1204M0-F1 [ [ [ [ [ RCMT-F2 RCMT 1606M0-F1 [ [ [ [ RCMT 0602M0-F2 [ [ [ [ [ [ [ [ RCMT 0803M0-F2 [ [ [ [ [ [ [ [ [ [ RCMT 10T3M0-F2 [ [ [ [ [ [ [ [ [ [ RCMT 1204M0-F2 [ [ [ [ [ [ [ [ [ [ [ [ RCMT 1606M0-F2 [ [ [ [ [ [ [ [ [ Stock standard Subject to change refer to current price and stock-list 55

035-087 TP0500 Inserts.fm Page 56 Thursday, February 11, 2010 12:31 PM Turning Inserts RCMX Tolerance: s = ±.005 Size I.C. s h 100300.394 1/8.141 1204.472 3/16.173 160600.630 1/4.205 200600.787 1/4.256 250700.984 5/16.283 320900 1.26 3/8.374 Grades Coated Uncoated Cermet Inserts RCMX RCMX 100300 [ [ [ TP0500 TP1000 TP1500 TP2000 TP2500 TP3000 TP3500 TP200 TP40 TM2000 TM4000 TS2000 TS2500 TK1000 TK2000 CP25 CP200 CP250 CP500 HX KX S25M 370 883 890 CMP CM RCMX 120400 [ [ [ [ [ RCMX 160600 [ [ RCMX 200600 [ [ [ [ [ [ [ [ RCMX 250700 [ [ [ [ [ [ [ [ [ RCMX 320900 [ [ [ [ [ [ [ [ [ [ Stock standard Subject to change refer to current price and stock-list 56

035-087 TP0500 Inserts.fm Page 57 Thursday, February 11, 2010 12:31 PM Turning Inserts RNMA, RNMG Tolerance: s = ±.005 Size I.C. s h 32 3/8 1/8.150 43 1/2 3/16.203 64 3/4 1/4.313 86 1 3/8.363 Grades Coated Uncoated Cermet Inserts RNMA RNMG-M3 TP0500 TP1000 TP1500 TP2000 TP2500 TP3000 TP3500 TP200 TP40 TM2000 TM4000 TS2000 TS2500 TK1000 TK2000 CP25 CP200 CP250 CP500 HX KX S25M 370 883 890 RNMA 43 [ [ RNMA 64 [ 64F [ RNMG 43-M3 [ [ [ [ CMP CM RNMG-M5(O) RNMG 43-M5(O) [ RNMG-MR4 RNMG 32-MR4 [ RNMG 43-MR4 [ [ [ [ RNMG 64-MR4 [ [ [ RNMG 86-MR4 [ [ [ [ Stock standard Subject to change refer to current price and stock-list 57

035-087 TP0500 Inserts.fm Page 58 Thursday, February 11, 2010 12:31 PM Turning Inserts SCMT Tolerances: s = ±.005 rε = ±.004 Size I.C. s h rε 21.5 1/4 3/32.114 1/64 2.52 5/16 1/8.138 1/32 32.5 3/8 5/32.177 1/64-1/32 43 1/2 3/16.217 1/32-3/64 86 1 3/8.342 3/32 Grades Coated Uncoated Cermet Inserts SCMT-F1 SCMT-F2 TP0500 TP1000 TP1500 TP2000 TP2500 TP3000 TP3500 TP200 TP40 TM2000 TM4000 TS2000 TS2500 TK1000 TK2000 CP25 CP200 CP250 CP500 HX KX S25M 370 883 890 SCMT 32.51-F1 [ [ [ [ [ 32.52-F1 [ [ [ [ [ [ [ [ [ [ [ 32.53-F1 [ [ [ [ SCMT 432-F1 [ [ [ [ [ [ [ 433-F1 [ [ [ [ [ SCMT 21.51-F2 [ [ [ [ CMP CM SCMT 2.522-F2 [ [ SCMT 32.51-F2 [ [ [ [ [ [ 32.52-F2 [ [ [ [ [ [ [ [ [ [ [ [ SCMT 432-F2 [ [ [ [ [ [ [ [ [ [ [ [ 433-F2 [ [ SCMT 866-F2 [ [ SCMT 866T-F2 [ [ Stock standard Subject to change refer to current price and stock-list 58

035-087 TP0500 Inserts.fm Page 59 Thursday, February 11, 2010 12:31 PM Turning Inserts SNMA, SNMG, SNMM, SNMP Tolerances: s = ±.005 rε = ±.004 Size I.C. s h rε 32 3/8 1/8.150 1/32-3/64 43 1/2 3/16.203 1/64-1/16 44 1/2 1/4.203 1/32-1/16 54 5/8 1/4.253 1/32-3/32 64 3/4 1/4.313 1/32-3/32 85 1 5/16.363 3/32 86 1 3/8.363 3/32 Grades Coated Uncoated Cermet Inserts SNMA TP0500 TP1000 TP1500 TP2000 TP2500 TP3000 TP3500 TP200 TP40 TM2000 TM4000 TS2000 TS2500 TK1000 TK2000 CP25 CP200 CP250 CP500 HX KX S25M 370 883 890 SNMA 322 [ 322F [ CMP CM SNMA 432 [ [ 432F [ 433 [ [ 434 [ [ 434F [ SNMA 543 [ SNMG-MF2 SNMG-MF3 SNMA 643 [ 644 [ SNMG 321-MF2 [ 322-MF2 [ [ [ SNMG 432-MF2 [ [ [ [ [ [ [ [ 433-MF2 [ [ [ [ [ [ SNMG 432-MF3 [ [ 433-MF3 [ SNMG-MF4 SNMG 432-MF4 [ [ 433-MF4 [ [ SNMG-M3 SNMG 431-M3 [ [ [ [ 432-M3 [ [ [ [ [ [ [ [ 432-M3(O) [ 433-M3 [ [ [ [ [ [ [ [ 433-M3(O) [ 434-M3 [ [ [ [ SNMG 543-M3 [ [ 544-M3 [ SNMG 643-M3 [ [ [ 644-M3 [ [ [ Stock standard Subject to change refer to current price and stock-list 59

035-087 TP0500 Inserts.fm Page 60 Thursday, February 11, 2010 12:31 PM Turning Inserts SNMA, SNMG, SNMM, SNMP Grades Coated Uncoated Cermet Inserts SNMG-M5 SNMG 322-M5 [ [ TP0500 TP1000 TP1500 TP2000 TP2500 TP3000 TP3500 TP200 TP40 TM2000 TM4000 TS2000 TS2500 TK1000 TK2000 CP25 CP200 CP250 CP500 HX KX S25M 370 883 890 CMP CM SNMG 432-M5 [ [ [ [ [ [ [ [ [ [ [ [ 433-M5 [ [ [ [ [ [ [ [ [ [ [ 434-M5 [ [ [ [ [ [ SNMG 542-M5 [ [ 543-M5 [ [ [ [ [ [ [ 544-M5 [ [ [ [ [ [ [ [ SNMG-MR3 SNMG 643-M5 [ [ [ [ [ [ [ [ [ [ 644-M5 [ [ [ [ [ [ [ [ [ [ SNMG 432-MR3 [ [ [ [ 433-MR3 [ [ [ SNMG 644-MR3 [ [ [ SNMG-MR4 SNMG 322-MR4 [ [ SNMG 432-MR4 [ [ [ 433-MR4 [ [ [ 434-MR4 [ [ [ SNMG 543-MR4 [ [ [ SNMG 643-MR4 [ [ [ 644-MR4 [ SNMG-MR6 SNMG-MR7 SNMG 866-MR4 [ SNMG 432-MR6 [ [ [ [ 433-MR6 [ [ [ [ 434-MR6 [ [ [ 442-MR6 [ [ [ 443-MR6 [ 444-MR6 [ [ [ SNMG 543-MR6 [ [ [ [ 544-MR6 [ [ [ 546-MR6 [ [ [ [ SNMG 432-MR7 [ [ [ [ [ [ 433-MR7 [ [ [ [ [ [ [ [ [ 434-MR7 [ [ [ SNMG 543-MR7 [ [ [ [ [ [ 544-MR7 [ [ [ [ [ SNMG 643-MR7 [ [ [ [ [ 644-MR7 [ [ [ [ [ [ [ [ [ [ 646-MR7 [ SNMM-MR6 SNMG 866-MR7 [ [ [ [ [ [ SNMM 543-MR6 [ [ [ [ 544-MR6 [ [ [ 546-MR6 [ [ [ [ [ Stock standard Subject to change refer to current price and stock-list 60

035-087 TP0500 Inserts.fm Page 61 Thursday, February 11, 2010 12:31 PM Turning Inserts SNMA, SNMG, SNMM, SNMP Grades Coated Uncoated Cermet Inserts SNMM-R4 SNMM 432-R4 [ [ [ [ [ 433-R4 [ [ [ 434-R4 [ TP0500 TP1000 TP1500 TP2000 TP2500 TP3000 TP3500 TP200 TP40 TM2000 TM4000 TS2000 TS2500 TK1000 TK2000 CP25 CP200 CP250 CP500 HX KX S25M 370 883 890 CMP CM SNMM 543-R4 [ [ [ [ 544-R4 [ [ [ SNMM...W-R4 SNMM 643-R4 [ [ [ [ [ 644-R4 [ [ [ [ [ [ [ [ [ 646-R4 [ [ [ [ [ [ [ SNMM 544W-R4 [ [ SNMM-R5 SNMM 644-R5 [ [ [ 646-R5 [ [ SNMM-R6 SNMM-R7 SNMM 432-R6 [ 433-R6 [ SNMM 643-R6 [ [ [ 644-R6 [ [ [ SNMM 543-R7 [ 544-R7 [ SNMM 643-R7 [ [ [ 644-R7 [ [ [ [ 646-R7 [ [ [ [ [ SNMM...W-R7 SNMM 856-R7 [ [ [ [ [ 866-R7 [ [ [ [ [ SNMM 644W-R7 [ [ [ 646W-R7 [ [ [ SNMM-R8 SNMM 433-R8 [ SNMM 644-R8 [ [ [ SNMM-RR6 SNMM 643-RR6 [ [ [ 644-RR6 [ [ [ [ [ [ Stock standard Subject to change refer to current price and stock-list 61

035-087 TP0500 Inserts.fm Page 62 Thursday, February 11, 2010 12:31 PM Turning Inserts SNMA, SNMG, SNMM, SNMP Grades Coated Uncoated Cermet Inserts SNMM-RR9 TP0500 TP1000 TP1500 TP2000 TP2500 TP3000 TP3500 TP200 TP40 TM2000 TM4000 TS2000 TS2500 TK1000 TK2000 CP25 CP200 CP250 CP500 HX KX S25M 370 883 890 SNMM 644-RR9 [ CMP CM SNMM 856-RR9 [ [ [ SNMM-56 SNMM 433-56 [ SNMM 644-56 [ [ SNMM-57 SNMP-M1 SNMM 856-56 [ [ SNMM 643-57 [ [ 644-57 [ [ [ [ [ 646-57 [ [ [ [ [ [ SNMM 856-57 [ [ [ [ [ [ [ SNMP 432-M1 [ [ SNMP 543-M1 [ [ SNMP-MF1 SNMP 644-M1 [ SNMP 432-MF1 [ [ [ [ [ [ 433-MF1 [ [ [ [ [ Stock standard Subject to change refer to current price and stock-list 62

035-087 TP0500 Inserts.fm Page 63 Thursday, February 11, 2010 12:31 PM Turning Inserts SNG, SNU Tolerances: s = ±.005 rε = ±.004 Size I.C. s rε 32 3/8 1/8 1/32 43 1/2 3/16 3/64-1/16 63 3/4 3/16 3/64-1/16 Grades Coated Uncoated Cermet Inserts SNG SNG 322 [ TP0500 TP1000 TP1500 TP2000 TP2500 TP3000 TP3500 TP200 TP40 TM2000 TM4000 TS2000 TS2500 TK1000 TK2000 CP25 CP200 CP250 CP500 HX KX S25M 370 883 890 CMP CM SNG 634 [ SNU SNU 433 [ [ [ SNU 433 [ [ [ SNU 434 [ [ SNU 633 [ SPMM Tolerances: s = ±.005 rε = ±.004 Size I.C. s h rε 32 3/8 1/8.165 1/32 43 1/2 3/16.203 1/32-3/64 54 5/8 1/4.253 3/64 64 3/4 1/4.313 1/32-1/16 Grades Coated Uncoated Cermet Inserts SPMM-46 TP0500 TP1000 TP1500 TP2000 TP2500 TP3000 TP3500 TP200 TP40 TM2000 TM4000 TS2000 TS2500 TK1000 TK2000 CP25 CP200 CP250 CP500 HX KX S25M 370 883 890 SPMM 322-46 [ CMP CM SPMM 432-46 [ [ 433-46 [ SPMM 543-46 [ [ SPMM 642-46 [ 644-46 [ [ Stock standard Subject to change refer to current price and stock-list 63

035-087 TP0500 Inserts.fm Page 64 Thursday, February 11, 2010 12:31 PM Turning Inserts SPG, SPMR, SPU Tolerances: s = ±.005 rε = ±.004 Size I.C. s rε 32 3/8 1/8 1/64-3/64 42 1/2 1/8 1/64-1/16 43 1/2 3/16 3/64 53 5/8 3/16 3/64 63 3/4 3/16 1/32-1/16 Grades Coated Uncoated Cermet Inserts SPG TP0500 TP1000 TP1500 TP2000 TP2500 TP3000 TP3500 TP200 TP40 TM2000 TM4000 TS2000 TS2500 TK1000 TK2000 CP25 CP200 CP250 CP500 HX KX S25M 370 883 890 SPG 321F [ 323F [ CMP CM SPG 421F [ [ 422 [ [ 422F [ [ [ 423F [ 424F [ 433F [ SPMR-FF1 SPG 633 [ 634 [ 634F [ SPMR 322-FF1 [ SPMR-F1 SPMR-F2 SPMR 321-F1 [ 322-F1 [ [ SPMR 421-F1 [ [ 422-F1 [ [ 423-F1 [ SPMR 422-F2 [ [ 423-F2 [ [ Stock standard Subject to change refer to current price and stock-list 64

035-087 TP0500 Inserts.fm Page 65 Thursday, February 11, 2010 12:31 PM Turning Inserts SPG, SPMR, SPU Inserts SPU Grades Coated Uncoated Cermet TP0500 TP1000 TP1500 TP2000 TP2500 TP3000 TP3500 TP200 TP40 TM2000 TM4000 TS2000 TS2500 TK1000 TK2000 CP25 CP200 CP250 CP500 HX KX S25M 370 883 890 SPU 321 [ 322 [ [ CMP CM SPU 421 [ [ 422 [ [ [ [ [ 423 [ SPU 533 [ SPU 633 [ [ 634T [ [ Stock standard Subject to change refer to current price and stock-list 65

035-087 TP0500 Inserts.fm Page 66 Thursday, February 11, 2010 12:31 PM Turning Inserts TCGT Tolerances: I.C. =.001 s = ±.005 rε = ±.004 Size I.C. s h rε 1.81.5 7/32 3/32.098 1/128-1/64 21.5 1/4 3/32.114 1/256-1/32 32.5 3/8 5/32.177 1/64-1/32 Grades Coated Uncoated Cermet Inserts TCGT-AL TP0500 TP1000 TP1500 TP2000 TP2500 TP3000 TP3500 TP200 TP40 TM2000 TM4000 TS2000 TS2500 TK1000 TK2000 CP25 CP200 CP250 CP500 HX KX S25M 370 883 890 TCGT 1.81.50.5F-AL [ 1.81.51F-AL [ CMP CM TCGT 21.50.5F-AL [ 21.51F-AL [ 21.52F-AL [ TCGT-F1 TCGT 32.51F-AL [ 32.52F-AL [ TCGT 21.50-F1 [ TCGT-UX TCGT 21.50.5L-UX [ 21.50.5R-UX [ 21.51L-UX [ 21.51R-UX [ Right-hand version shown [ Stock standard Subject to change refer to current price and stock-list 66

035-087 TP0500 Inserts.fm Page 67 Thursday, February 11, 2010 12:31 PM Turning Inserts TCMT Tolerances: s = ±.005 rε = ±.004 Size I.C. s h rε 21.5 1/4 3/32.114 1/128-1/32 32.5 3/8 5/32.177 1/128-3/64 43 1/2 3/16.217 1/64-1/32 Grades Coated Uncoated Cermet Inserts TCMT-F1 TCMT-F2 TP0500 TP1000 TP1500 TP2000 TP2500 TP3000 TP3500 TP200 TP40 TM2000 TM4000 TS2000 TS2500 TK1000 TK2000 CP25 CP200 CP250 CP500 HX KX S25M 370 883 890 TCMT 21.50.5-F1 [ [ [ [ [ 21.51-F1 [ [ [ [ [ [ [ [ [ [ 21.51-F1(O) [ 21.52-F1 [ [ [ [ [ [ [ [ [ [ [ 21.52-F1(O) [ TCMT 32.50.5-F1 [ [ [ 32.51-F1 [ [ [ [ [ [ [ [ [ [ [ 32.52-F1 [ [ [ [ [ [ [ [ [ [ [ [ [ [ 32.53-F1 [ [ [ [ TCMT 32.51-F2 [ [ [ [ [ [ [ [ [ [ 32.52-F2 [ [ [ [ [ [ [ [ [ [ [ [ CMP CM TCMT 431-F2 [ [ 432-F2 [ [ [ [ [ [ [ Stock standard Subject to change refer to current price and stock-list 67

035-087 TP0500 Inserts.fm Page 68 Thursday, February 11, 2010 12:31 PM Turning Inserts TCMX Tolerances: I.C.= ±.002 s = ±.005 rε = ±.004 Size I.C. s h rε 32.5 3/8.156.177 1/64-1/32 Grades Coated Uncoated Cermet Inserts TCMX...W-F1 TP0500 TP1000 TP1500 TP2000 TP2500 TP3000 TP3500 TP200 TP40 TM2000 TM4000 TS2000 TS2500 TK1000 TK2000 CP25 CP200 CP250 CP500 HX KX S25M 370 883 890 TCMX 32.51W-F1 [ 32.52W-F1 [ [ [ CMP CM [ Stock standard Subject to change refer to current price and stock-list 68

035-087 TP0500 Inserts.fm Page 69 Thursday, February 11, 2010 12:31 PM Turning Inserts TDAB Tolerances: I.C. = ±.001 s = ±.001 rε = ±.001 Size I.C. s h rε 1.21.5 5/32.047.093 1/256-1/64 Grades Coated Uncoated Cermet Inserts TDAB TP0500 TP1000 TP1500 TP2000 TP2500 TP3000 TP3500 TP200 TP40 TM2000 TM4000 TS2000 TS2500 TK1000 TK2000 CP25 CP200 CP250 CP500 HX KX S25M 370 883 890 TDAB 1.21.50 [ [ [ 1.21.51 [ [ [ CMP CM TDCH Tolerances: s = ±.001 I.C. = ±.001 rε = ±.001 Size I.C. s h rε 1.21.5 5/32.047.093 1/128-1/164 Grades Coated Uncoated Cermet Inserts TDCH TP0500 TP1000 TP1500 TP2000 TP2500 TP3000 TP3500 TP200 TP40 TM2000 TM4000 TS2000 TS2500 TK1000 TK2000 CP25 CP200 CP250 CP500 HX KX S25M 370 883 890 TDCH 1.21.50.5L [ 1.21.50.5R [ 1.21.51L [ 1.21.51R [ CMP CM Right-hand shown [ Stock standard Note: R.H. inserts used in L.H bars, L.H. inserts used in R.H. bars. Subject to change refer to current price and stock-list 69

035-087 TP0500 Inserts.fm Page 70 Thursday, February 11, 2010 12:31 PM Turning Inserts TNG Tolerances: s = ±.005 rε = ±.004 Size I.C. s rε 32 3/8 1/8 1/32 Grades Coated Uncoated Cermet Inserts TNG TP0500 TPP100 TP1500 TP2000 TP2500 TP3000 TP3500 TP200 TP40 TM2000 TM4000 TS2000 TS2500 TK1000 TK2000 CP25 CP200 CP250 CP500 HX KX S25M 370 883 890 TNG 322F [ CMP CM [ Stock standard Subject to change refer to current price and stock-list 70

035-087 TP0500 Inserts.fm Page 71 Thursday, February 11, 2010 12:31 PM Turning Inserts TNMA, TNMG, TNMM, TNMP Tolerances: s = ±.005 rε = ±.004 Size I.C. s h rε 22 1/4 1/8.090 1/128-1/32 32 3/8 1/8.150 1/64-3/32 33 3/8 3/16.150 1/64-1/16 43 1/2 3/16.203 1/64-1/8 54 5/8 1/4.253 1/32-1/8 66 3/4 3/8.313 3/32 Grades Coated Uncoated Cermet Inserts TNMA TP0500 TP1000 TP1500 TP2000 TP2500 TP3000 TP3500 TP200 TP40 TM2000 TM4000 TS2000 TS2500 TK1000 TK2000 CP25 CP200 CP250 CP500 HX KX S25M 370 883 890 TNMA 222F [ CMP CM TNMA 321F [ 322 [ 322F [ 323F [ 331 [ 332 [ [ 333 [ [ 334 [ TNMA 431F [ 432 [ 432F [ 433 [ [ 434 [ [ 438 [ TNMG-FF1 TNMA 544F [ TNMG 331-FF1 [ [ [ [ 332-FF1 [ [ TNMG-MF2 TNMG 221-MF2 [ 222-MF2 [ TNMG 331-MF2 [ [ [ [ [ [ [ [ 332-MF2 [ [ [ [ [ [ [ [ 333-MF2 [ [ [ [ [ [ TNMG-MF3 TNMG 431-MF2 [ [ [ [ 432-MF2 [ [ [ [ [ 433-MF2 [ [ [ TNMG 322-MF3 [ [ 331-MF3 [ [ 332-MF3 [ [ [ [ [ 333-MF3 [ TNMG 431-MF3 [ [ 432-MF3 [ [ 433-MF3 [ [ Stock standard Subject to change refer to current price and stock-list 71

035-087 TP0500 Inserts.fm Page 72 Thursday, February 11, 2010 12:31 PM Turning Inserts TNMA, TNMG, TNMM, TNMP Grades Coated Uncoated Cermet Inserts TNMG-MF4 TNMG-MF5 TP0500 TP1000 TP1500 TP2000 TP2500 TP3000 TP3500 TP200 TP40 TM2000 TM4000 TS2000 TS2500 TK1000 TK2000 CP25 CP200 CP250 CP500 HX KX S25M 370 883 890 TNMG 331-MF4 [ [ 332-MF4 [ [ [ [ [ [ 333-MF4 [ [ [ [ 432-MF4 [ [ 433-MF4 [ [ TNMG 332-MF5 [ [ [ [ [ [ 333-MF5 [ [ [ [ [ CMP CM TNMG-M2 TNMG 433-M2 [ TNMG 543-M2 [ 544-M2 [ TNMG-M3 TNMG 331-M3 [ [ [ [ [ [ [ [ [ 332-M3 [ [ [ [ [ [ [ [ [ 332-M3(O) [ 333-M3 [ [ [ [ [ [ 333-M3(O) [ TNMG 432-M3 [ [ [ [ [ [ [ [ 433-M3 [ [ [ [ [ [ 434-M3 [ TNMG-M5 TNMG 543-M3 [ [ [ [ [ TNMG 322-M5 [ [ [ [ 331-M5 [ [ [ 332-M5 [ [ [ [ [ [ [ [ [ [ [ [ [ 333-M5 [ [ [ [ [ [ [ [ 334-M5 [ TNMG 431-M5 [ [ [ [ 432-M5 [ [ [ [ [ [ [ [ [ [ 433-M5 [ [ [ [ [ [ [ [ [ [ 434-M5 [ [ [ [ [ [ [ [ TNMG-MR3 TNMG 542-M5 [ [ [ [ 543-M5 [ [ [ [ [ [ [ [ 544-M5 [ [ [ [ [ [ [ [ TNMG 333-MR3 [ [ TNMG 433-MR3 [ [ [ 434-MR3 [ [ Stock standard Subject to change refer to current price and stock-list 72

035-087 TP0500 Inserts.fm Page 73 Thursday, February 11, 2010 12:31 PM Turning Inserts TNMA, TNMG, TNMM, TNMP Grades Coated Uncoated Cermet Inserts TNMG-MR4 TP0500 TP1000 TP1500 TP2000 TP2500 TP3000 TP3500 TP200 TP40 TM2000 TM4000 TS2000 TS2500 TK1000 TK2000 CP25 CP200 CP250 CP500 HX KX S25M 370 883 890 TNMG 221-MR4 [ [ 222-MR4 [ [ CMP CM TNMG 321-MR4 [ [ [ 322-MR4 [ [ [ 324-MR4 [ 332-MR4 [ [ [ TNMG 431-MR4 [ [ 432-MR4 [ [ [ [ 433-MR4 [ [ [ 434-MR4 [ [ [ 436-MR4 [ [ [ 438-MR4 [ [ TNMG 542-MR4 [ [ [ [ 543-MR4 [ [ 544-MR4 [ [ 548-MR4 [ TNMG-MR6 TNMG-MR7 TNMG 666-MR4 [ [ TNMG 332-MR6 [ [ [ [ 333-MR6 [ [ [ TNMG 432-MR6 [ [ [ [ 433-MR6 [ [ [ TNMG 332-MR7 [ [ [ [ [ 333-MR7 [ [ [ TNMG 432-MR7 [ [ [ [ [ 433-MR7 [ [ [ 434-MR7 [ [ 436-MR7 [ TNMG 543-MR7 [ [ [ [ [ 544-MR7 [ [ [ [ [ TNMG-UX Right-hand version shown TNMM-R4 TNMG 666-MR7 [ [ [ [ [ [ TNMG 331L-UX [ [ [ 331R-UX [ [ [ 332L-UX [ [ [ 332R-UX [ [ [ TNMM 332-R4 [ [ [ [ 333-R4 [ [ [ [ TNMM 432-R4 [ [ [ [ [ 433-R4 [ [ [ [ [ [ 434-R4 [ [ [ [ [ [ [ [ Stock standard Subject to change refer to current price and stock-list 73

035-087 TP0500 Inserts.fm Page 74 Thursday, February 11, 2010 12:31 PM Turning Inserts TNMA, TNMG, TNMM, TNMP Grades Coated Uncoated Cermet Inserts TNMM-R6 TNMP-MF1 TNMP-M1 TP0500 TP1000 TP1500 TP2000 TP2500 TP3000 TP3500 TP200 TP40 TM2000 TM4000 TS2000 TS2500 TK1000 TK2000 CP25 CP200 CP250 CP500 HX KX S25M 370 883 890 TNMM 331-R6 [ [ 332-R6 [ TNMM 432-R6 [ [ 433-R6 [ 434-R6 [ [ TNMP 331-MF1 [ [ [ [ 332-MF1 [ [ [ [ [ [ 333-MF1 [ [ [ TNMP 321-M1 [ 322-M1 [ 332-M1 [ CMP CM TNMP 432-M1 [ [ [ 433-M1 [ 434-M1 [ TNMP 666-M1 [ [ Stock standard Subject to change refer to current price and stock-list 74

035-087 TP0500 Inserts.fm Page 75 Thursday, February 11, 2010 12:31 PM Turning Inserts TNMX Tolerances: I.C. = ±.002 s = ±.005 rε = ±.004 Size I.C. s h rε 33 3/8.187.150 1/32-3/64 Grades Coated Uncoated Cermet Inserts TNMX...W-M3 TP0500 TP1000 TP1500 TP2000 TP2500 TP3000 TP3500 TP200 TP40 TM2000 TM4000 TS2000 TS2500 TK1000 TK2000 CP25 CP200 CP250 CP500 HX KX S25M 370 883 890 TNMX 332W-M3 [ [ [ 333W-M3 [ [ [ CMP CM [ Stock standard Subject to change refer to current price and stock-list 75

035-087 TP0500 Inserts.fm Page 76 Thursday, February 11, 2010 12:31 PM Turning Inserts TPG, TPGA, TPU Tolerances: s = ±.005 rε = ±.004 Size I.C. s h rε 21 1/4 3/32-1/64 22 1/4 1/8-1/64-1/32 32 3/8 1/8-1/256-1/16 43 1/2 3/16-1/256-1/16 TPGA 211 1/4 3/32.125 1/64 TPGA 322 3/8 1/8.156 1/32 Grades Coated Uncoated Cermet Inserts TPG TP0500 TP1000 TP1500 TP2000 TP2500 TP3000 TP3500 TP200 TP40 TM2000 TM4000 TS2000 TS2500 TK1000 TK2000 CP25 CP200 CP250 CP500 HX KX S25M 370 883 890 TPG 211 [ 221F [ 222 [ 222F [ [ CMP CM TPG 320F [ 321 [ [ [ 321F [ [ [ [ 322 [ [ [ [ 322F [ [ [ [ 323F [ 324F [ TPGA TPG 430F [ 431 [ 431F [ [ [ TPG 431F [ [ [ TPG 432 [ [ [ 432F [ [ 433 [ 433F [ 434 [ 434F [ TPGA 211F [ TPGA 322F [ TPU TPU 212 [ 221 [ [ [ 222 [ TPU 321 [ [ [ [ [ [ TPU 321 [ [ [ [ [ [ TPU 322 [ [ [ [ [ [ TPU 322 [ [ [ [ [ [ TPU 322F [ 323 [ [ TPU 431 [ 432 [ [ [ [ [ [ TPU 432 [ [ [ [ [ [ TPU 433 [ [ [ Stock standard Subject to change refer to current price and stock-list 76

035-087 TP0500 Inserts.fm Page 77 Thursday, February 11, 2010 12:31 PM Turning Inserts TPMM Tolerances: s = ±.005 rε = ±.004 Size I.C. s h rε 2.52 5/16 1/8.105 1/64-1/32 32 3/8 1/8.165 1/64-1/16 43 1/2 3/16.203 1/64-1/16 Grades Coated Uncoated Cermet Inserts TPMM-46 TP0500 TP1000 TP1500 TP2000 TP2500 TP3000 TP3500 TP200 TP40 TM2000 TM4000 TS2000 TS2500 TK1000 TK2000 CP25 CP200 CP250 CP500 HX KX S25M 370 883 890 TPMM 2.521-46 [ [ 2.522-46 [ [ CMP CM TPMM 321-46 [ [ 322-46 [ [ [ 323-46 [ 324-46 [ TPMM 431-46 [ [ 432-46 [ [ 433-46 [ 434-46 [ [ [ Stock standard Subject to change refer to current price and stock-list 77

035-087 TP0500 Inserts.fm Page 78 Thursday, February 11, 2010 12:31 PM Turning Inserts TPMR Tolerances: s = ±.005 rε = ±.004 Size I.C. s rε 22 1/4 1/8 1/64-1/32 32 3/8 1/8 1/64-3/64 43 1/2 3/16 1/32-3/64 Grades Coated Uncoated Cermet Inserts TPMR-F1 TPMR-F2 TP0500 TP1000 TP1500 TP2000 TP2500 TP3000 TP3500 TP200 TP40 TM2000 TM4000 TS2000 TS2500 TK1000 TK2000 CP25 CP200 CP250 CP500 HX KX S25M 370 883 890 TPMR 221-F1 [ [ [ [ [ [ [ 222-F1 [ [ [ [ [ [ TPMR 321-F1 [ [ [ [ [ [ 322-F1 [ [ [ [ [ [ 322T-F1 [ 323-F1 [ TPMR 222-F2 [ CMP CM TPMR 321-F2 [ [ 322-F2 [ [ [ 432-F2 [ 433-F2 [ [ Stock standard Subject to change refer to current price and stock-list 78

035-087 TP0500 Inserts.fm Page 79 Thursday, February 11, 2010 12:31 PM Turning Inserts TPMT Tolerances: s = ±.005 rε = ±.004 Size I.C. s h rε 21.5 1/4 3/32.114 1/64-1/32 32.5 3/8 5/32.177 1/64-1/32 Grades Coated Uncoated Cermet Inserts TPMT-F1 TP0500 TP1000 TP1500 TP2000 TP2500 TP3000 TP3500 TP200 TP40 TM2000 TM4000 TS2000 TS2500 TK1000 TK2000 CP25 CP200 CP250 CP500 HX KX S25M 370 883 890 TPMT 21.51-F1 [ [ 21.52-F1 [ [ CMP CM TPMT 32.51-F1 [ 32.52-F1 [ [ Stock standard Subject to change refer to current price and stock-list 79

035-087 TP0500 Inserts.fm Page 80 Thursday, February 11, 2010 12:31 PM Turning Inserts VBGT Tolerances: I.C.= ±.001 s = ±.005 rε = ±.001 Size I.C. s h rε 21.50 1/4 3/32.114 1/256 330 3/8 3/16.177 1/256 Grades Coated Uncoated Cermet Inserts VBGT-F1 TP0500 TP1000 TP1500 TP2000 TP2500 TP3000 TP3500 TP200 TP40 TM2000 TM4000 TS2000 TS2500 TK1000 TK2000 CP25 CP200 CP250 CP500 HX KX S25M 370 883 890 VBGT 21.50-F1 [ CMP CM VBGT 330-F1 [ VBMT Tolerances: s = ±.005 rε = ±.004 Size I.C. s h rε 21.5 1/4 3/32.114 1/128-1/32 33 3/8 3/16.173 1/128-3/64 Grades Coated Uncoated Cermet Inserts VBMT-F1 VBMT-F2 TP0500 TP1000 TP1500 TP2000 TP2500 TP3000 TP3500 TP200 TP40 TM2000 TM4000 TS2000 TS2500 TK1000 TK2000 CP25 CP200 CP250 CP500 HX KX S25M 370 883 890 VBMT 21.50.5-F1 [ [ [ [ [ [ 21.51-F1 [ [ [ [ [ [ [ [ 21.52-F1 [ [ [ [ VBMT 330.5-F1 [ [ [ 331-F1 [ [ [ [ [ [ [ [ [ [ [ [ [ 332-F1 [ [ [ [ [ [ [ [ [ [ [ [ [ 333-F1 [ [ [ [ VBMT 331-F2 [ [ [ [ [ [ [ [ [ [ [ [ [ 332-F2 [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ 333-F2 [ [ [ [ [ [ [ CMP CM [ Stock standard Subject to change refer to current price and stock-list 80

035-087 TP0500 Inserts.fm Page 81 Thursday, February 11, 2010 12:31 PM Turning Inserts VCGR Tolerances: s = ±.005 rε = ±.004 Size I.C. s rε 33 3/8 3/16 1/64-1/32 Grades Coated Uncoated Cermet Inserts VCGR TP0500 TP1000 TP1500 TP2000 TP2500 TP3000 TP3500 TP200 TP40 TM2000 TM4000 TS2000 TS2500 TK1000 TK2000 CP25 CP200 CP250 CP500 HX KX S25M 370 883 890 VCGR 331 [ 331F 332 [ 332F [ [ CMP CM VCGT Tolerances: I.C. =.001 s = ±.005 rε = ±.004 Size I.C. s h rε 22 1/4.125.110 1/512-1/64 33 3/8.187.173 1/64-3/64 Grades Coated Uncoated Cermet Inserts VCGT-AL TP0500 TP1000 TP1500 TP2000 TP2500 TP3000 TP3500 TP200 TP40 TM2000 TM4000 TS2000 TS2500 TK1000 TK2000 CP25 CP200 CP250 CP500 HX KX S25M 370 883 890 VCGT 220.5F-AL [ 221F-AL [ CMP CM VCGT 330.5-AL [ 331F-AL [ 332F-AL [ 333F-AL [ [ Stock standard Subject to change refer to current price and stock-list 81

035-087 TP0500 Inserts.fm Page 82 Thursday, February 11, 2010 12:31 PM Turning Inserts VNGM, VNGP, VNMG, VNMP, VNMU Tolerances: s = ±.005 rε = ±.004 Size I.C. s h rε 2.53 5/16 3/16.150 1/128-3/64 33 3/8 3/16.150 1/128-3/64 43 1/2 3/16.233 1/64-1/16 43-203 1/2 3/16.203 1/64-1/16 Grades Coated Uncoated Cermet Inserts VNGM-MF1 VNGP-M1 TP0500 TP1000 TP1500 TP2000 TP2500 TP3000 TP3500 TP200 TP40 TM2000 TM4000 TS2000 TS2500 TK1000 TK2000 CP25 CP200 CP250 CP500 HX KX S25M 370 883 890 VNGM 331-MF1 [ [ 331F-MF1 [ [ 332-MF1 [ [ 332F-MF1 [ [ VNGP 330.5F-M1 [ [ 331F-M1 [ [ 332F-M1 [ [ CMP CM VNGP 330.5-M1 [ [ VNGP 331-M1 [ [ VNGP 332-M1 [ [ VNMG-FF1 VNGP 432-M1 [ [ 432F-M1-203 [ VNMG 331-FF1 [ [ VNMG-MF2 VNMG 331-MF2 [ 332-MF2 [ 333-MF2 [ [ VNMG-MF3 VNMG 331-MF3 [ [ 332-MF3 [ [ VNMG 432-MF3-203 [ VNMG-MF4 VNMG 331-MF4 [ [ [ [ 332-MF4 [ [ [ [ VNMG-M3 VNMG 331-M3 [ [ [ [ [ [ [ 332-M3 [ [ [ [ [ [ [ [ [ Stock standard Subject to change refer to current price and stock-list 82

035-087 TP0500 Inserts.fm Page 83 Thursday, February 11, 2010 12:31 PM Turning Inserts VNGM, VNGP, VNMG, VNMP, VNMU Grades Coated Uncoated Cermet Inserts VNMG-MR4 VNMP-M1 TP0500 TP1000 TP1500 TP2000 TP2500 TP3000 TP3500 TP200 TP40 TM2000 TM4000 TS2000 TS2500 TK1000 TK2000 CP25 CP200 CP250 CP500 HX KX S25M 370 883 890 VNMG 332-MR4 [ [ [ 333-MR4 [ [ [ VNMG 431-MR4 [ [ 432-MR4 [ [ 432-MR4-203 [ [ 433-MR4 [ 434-MR4 [ VNMP 331-M1 [ [ [ 332-M1 [ [ [ CMP CM VNMU-M3 VNMU 2.531-M3 [ [ [ [ 2.532-M3 [ [ [ [ [ Stock standard Subject to change refer to current price and stock-list 83

035-087 TP0500 Inserts.fm Page 84 Thursday, February 11, 2010 12:31 PM Turning Inserts WCMT Tolerances: s = ±.004 rε = ±.004 Size I.C. s h rε 32.5 3/8 5/32.177 1/128-1/64 Grades Coated Uncoated Cermet Inserts WCMT-F1 WCMT 32.50.5-F1 [ 32.51-F1 [ TP0500 TP1000 TP1500 TP2000 TP2500 TP3000 TP3500 TP200 TP40 TM2000 TM4000 TS2000 TS2500 TK1000 TK2000 CP25 CP200 CP250 CP500 HX KX S25M 370 883 890 CMP CM [ Stock standard Subject to change refer to current price and stock-list 84

035-087 TP0500 Inserts.fm Page 85 Thursday, February 11, 2010 12:31 PM Turning Inserts WNGP, WNMA, WNMG, WNMM, WNMP Tolerances: s = ±.005 rε = ±.004 Size I.C. s h rε 33 3/8 3/16.150 1/32 43 1/2 3/16.203 1/128-3/64 44 1/2 1/4.203 1/32-1/16 Grades Coated Uncoated Cermet Inserts WNGP-MF1 WNMA WNMG-MF2 WNMG...W-MF2 WNMG-MF3 WNMG-MF4 TP0500 TP1000 TP1500 TP2000 TP2500 TP3000 TP3500 TP200 TP40 TM2000 TM4000 TS2000 TS2500 TK1000 TK2000 CP25 CP200 CP250 CP500 HX KX S25M 370 883 890 WNGP 330.5-MF1 [ [ [ [ WNGP 430.5-MF1 [ 431-MF1 [ 432-MF1 [ WNMA 332 [ [ 333 [ [ WNMA 432 [ [ 433 [ [ WNMG 331-MF2 [ [ [ [ [ [ [ [ [ 332-MF2 [ [ [ [ [ [ [ [ [ 333-MF2 [ [ [ WNMG 431-MF2 [ [ [ [ [ 432-MF2 [ [ [ [ [ [ [ 433-MF2 [ [ [ [ WNMG 331W-MF2 [ [ [ 332W-MF2 [ [ [ [ [ WNMG 431W-MF2 [ [ [ [ 432W-MF2 [ [ [ [ [ 433W-MF2 [ [ WNMG 332-MF3 [ [ [ WNMG 431-MF3 [ [ [ 432-MF3 [ [ [ [ 433-MF3 [ WNMG 331-MF4 [ [ 332-MF4 [ [ [ [ [ 333-MF4 [ [ CMP CM WNMG 431-MF4 [ [ 432-MF4 [ [ [ [ [ [ [ [ 433-MF4 [ [ [ [ [ [ [ Stock standard Subject to change refer to current price and stock-list 85

035-087 TP0500 Inserts.fm Page 86 Thursday, February 11, 2010 12:31 PM Turning Inserts WNGP, WNMA, WNMG, WNMM, WNMP Grades Coated Uncoated Cermet Inserts WNMG-MF5 TP0500 TP1000 TP1500 TP2000 TP2500 TP3000 TP3500 TP200 TP40 TM2000 TM4000 TS2000 TS2500 TK1000 TK2000 CP25 CP200 CP250 CP500 HX KX S25M 370 883 890 WNMG 332-MF5 [ [ [ [ [ [ 333-MF5 [ [ [ [ [ CMP CM WNMG 432-MF5 [ [ [ [ [ [ [ [ [ [ 433-MF5 [ [ [ [ [ [ [ [ [ [ 434-MF5 [ [ [ [ WNMG...W-MF5 WNMG 432W-MF5 [ WNMG-M3 WNMG...W-M3 WNMG-M5 WNMG-MR3 WNMG 330.5-M3 [ 331-M3 [ [ [ [ [ [ [ [ 332-M3 [ [ [ [ [ [ [ [ [ 332-M3(O) [ 333-M3 [ [ [ [ [ [ [ 333-M3(O) [ WNMG 431-M3 [ [ [ [ [ [ [ 432-M3 [ [ [ [ [ [ [ [ [ 432-M3(O) [ 433-M3 [ [ [ [ [ [ [ [ [ 434-M3 [ [ [ WNMG 332W-M3 [ [ [ [ 333W-M3 [ [ [ [ [ WNMG 432W-M3 [ [ [ [ [ 433W-M3 [ [ [ [ [ [ WNMG 332-M5 [ [ [ [ [ [ [ [ [ [ 333-M5 [ [ [ [ [ [ [ WNMG 432-M5 [ [ [ [ [ [ [ [ [ [ [ [ [ 433-M5 [ [ [ [ [ [ [ [ [ [ [ [ [ 434-M5 [ [ [ [ [ [ [ [ 442-M5 [ [ 443-M5 [ [ [ [ [ 444-M5 [ [ [ [ [ [ WNMG 332-MR3 [ [ [ [ 333-MR3 [ [ [ WNMG-MR6 WNMG-MR7 WNMG 432-MR6 [ [ [ [ 433-MR6 [ [ [ [ 434-MR6 [ [ [ 443-MR6 [ [ [ [ 444-MR6 [ [ [ WNMG 432-MR7 [ [ [ [ [ [ [ 433-MR7 [ [ [ [ [ [ [ [ 434-MR7 [ [ [ [ [ [ [ Stock standard Subject to change refer to current price and stock-list 86

035-087 TP0500 Inserts.fm Page 87 Thursday, February 11, 2010 12:31 PM Turning Inserts WNGP, WNMA, WNMG, WNMM, WNMP Grades Coated Uncoated Cermet Inserts WNMM-R6 TP0500 TP1000 TP1500 TP2000 TP2500 TP3000 TP3500 TP200 TP40 TM2000 TM4000 TS2000 TS2500 TK1000 TK2000 CP25 CP200 CP250 CP500 HX KX S25M 370 883 890 WNMM 432-R6 [ [ [ 433-R6 [ CMP CM WNMM-R7 WNMM 443-R7 [ 444-R7 [ WNMP-MF1 WNMP-M1 WNMP 331-MF1 [ [ [ [ [ [ 332-MF1 [ [ [ [ [ [ 333-MF1 [ WNMP 431-MF1 [ [ [ [ 432-MF1 [ [ [ [ WNMP 431-M1 [ 432-M1 [ 433-M1 [ [ Stock standard Subject to change refer to current price and stock-list 87

Turning - Grades, CBN060K PCBN grade CBN060K CBN060K is intended for finish machining of case hardened steel when the cut is continuous to moderately interrupted and the depth of cut is on the order of 0.020 or less. This grade features a unique PVD coating that features increased adhesion, increased wear resistance, and a lower coefficient of friction compared to other PcBN coatings. (Ti,Si,Al)N Cutting data recommendations D.O.C. <.02 in Finishing Cutting speed, vc (sf/min) Feed rate (inch/rev) Case hardened steel (55-62 HRC) - Turning 88 088 CBN060K Tech.indd 88 2/12/2010 7:35:24 AM

089-119 PCBN Inserts.fm Page 89 Thursday, February 11, 2010 12:36 PM Secomax PCBN, Inserts CCGW Tolerances: s = ±.005 rε = ±.004 Size I.C. s h rε 21.5 1/4 3/32.114 1/128-1/32 32.5 3/8 5/32.177 1/64-3/64 43 1/2 3/16.217 1/64-1/32 Uncoated Grades Coated Toolholders Inserts CCGW CCGW...-B CBN10 CBN100 CBN150 CBN200 CCGW 21.50.5S-00420-LF [ 21.51S-00420-LF [ [ 21.52S-00420-LF [ CBN300 CBN350 CCGW 21.51E-L1-B [ CCGW 21.51S-00625-L1-B [ 21.52S-00625-L1-B [ CBN050C CBN060K CBN100P CBN160C CBN300P CBN400C External SCFCR/L..2 SCGCR/L..2 SCLCR/L..2 SCMCN..2 Internal..-SCFCR/L..2..-SCLCR/L..2 CCGW...-LF CCGW 32.51S-00420-LF [ [ 32.52S-00420-LF [ [ CCGW 32.52S-L0-B [ SCFCR/L..3 SCGCR/L..3 SCLCR/L..3 SCMCN..3..-SCFCR/L..3..-SCLCR/L..3 CCGW 32.51E-L1-B [ 32.52E-L1-B [ E = Honed S = Chamfered and honed B = Multi-corner WZ = Wiper geometry LF = Complete top layer CCGW 32.51S-00625-L1-B [ [ 32.52S-00625-L1-B [ [ 32.53S-00625-L1-B [ CCGW 32.51E-L0-WZ [ SCLCR/L..3..-SCLCR/L..3 For tip sizes see MN Turning CCGW 32.51S-L0-WZ [ [ 32.51S-00625-L1-WZ-B [ CCGW 431S-L0 [ 432S-L0 [ SCLCR/L..4 CCGW 432S-L1-B [ [ Stock standard Subject to change refer to current price and stock-list 89

089-119 PCBN Inserts.fm Page 90 Thursday, February 11, 2010 12:36 PM Secomax PCBN, Inserts CCMW Tolerances: s = ±.005 rε = ±.004 Size I.C. s h rε 21.51 1/4 3/32.114 1/64 21.52 1/4 3/32.114 1/32 32.51 3/8 5/32.177 1/64 32.52 3/8 5/32.177 1/32 32.53 3/8 5/32.177 3/64 Uncoated Grades Coated Toolholders Inserts CCMW CBN10 CCMW 21.51E-L0 [ 21.52E-L0 [ CCMW 21.51S-L0 [ 21.52S-L0 [ CBN100 CBN150 CBN200 CBN300 CBN350 CBN050C CBN060K CBN100P CBN160C CBN300P CBN400C External SCLCR/L..2 SCGCR/L..2 SCFCR/L..2 SCRGR/L..2 SCNCN..2 Internal..-SCFCR/L 2..-SCLCR/L..2 CCMW 32.51E-L0 [ 32.52E-L0 [ CCMW 32.51S-L0 [ 32.52S-L0 [ 32.53S-L0 [ SCLCR/L..3 SCRCR/L..3 SCFCR/L..3 SCGCR/L..3 SCMCN..3 -..SCLCR/L 3 -..SCFCR/L 3 CCMW...-B CCMW 21.51E-L0-B [ 21.52E-L0-B [ CCMW 21.52S-L0-B [ SCLCR/L..2 SCGCR/L..2 SCFCR/L..2 SCRGR/L..2 SCNCN..2..-SCFCR/L 2..-SCLCR/L..2 E = Honed S = Chamfered and honed B = Multi-corner For tip sizes see MN Turning CCMW 32.51S-L0-B [ [ 32.52S-L0-B [ CCMW 32.51E-L0-B [ 32.52E-L0-B [ 32.51E-L1-B [ 32.52E-L1-B [ SCLCR/L..3 SCRCR/L..3 SCFCR/L..3 SCGCR/L..3 SCMCN..3 -..SCLCR/L 3 -..SCFCR/L 3 CCMW 32.52S-L1-B [ [ Stock standard Subject to change refer to current price and stock-list 90

089-119 PCBN Inserts.fm Page 91 Thursday, February 11, 2010 12:36 PM Secomax PCBN, Inserts CNGA Tolerances: s = ±.005 rε = ±.004 Size I.C. s h rε 431 1/2 3/16.203 1/64 432 1/2 3/16.203 1/32 433 1/2 3/16.203 3/64 Uncoated Grades Coated Toolholders Inserts CNGA CBN10 CNGA 432E-L0 [ CBN100 CBN150 CBN200 CNGA 432E-L1-B [ CBN300 CBN350 CBN050C CBN060K CBN100P CBN160C CBN300P CBN400C External MCLNR/L..4 MCFNR/L..4 MCGNR/L..4 Internal..-MCLNR/L 4 CNGA...-B CNGA 431S-L0 [ 432S-L0 [ 433S-L0 [ E = Honed S = Chamfered and honed WZ = Wiper geometry B = Multi-corner For tip sizes see MN Turning CNGA 431S-L0-B [ 432S-L0-B [ [ [ 433S-L0-B [ [ CNGA 432S-00625-L0-B [ 433S-00625-L0-B [ CNGA 431S-L1 [ 432S-L1 [ 433S-L1 [ CNGA 432S-L1-B [ CNGA 431S-00625-L1-B [ 432S-00625-L1-B [ [ [ [ 433S-00625-L1-B [ [ [ [ CNGA 432S-L1-WZ [ [ MCLNR/L..4..-MCLNR/L 4 CNGA 432S-L1-WZN-B [ CNGA 432S-L1-WZP-B [ CNGA 432S-00625-L1-WZ-B [ [ [ 433S-00625-L1-WZ-B [ [ 432S-00625-L1-WZN-B [ 432S-00625-L1-WZP-B [ [ Stock standard Subject to change refer to current price and stock-list 91

089-119 PCBN Inserts.fm Page 92 Thursday, February 11, 2010 12:36 PM Secomax PCBN, Inserts CNGN Tolerances: s = ±.005 rε = ±.004 Size I.C. s rε 321 3/8 1/8 1/64 322 3/8 1/8 1/32 323 3/8 1/8 3/64 Uncoated Grades Coated Toolholders Inserts CNGN CBN10 CBN100 CNGN 321S [ 322S [ 323S [ CBN150 CBN200 CBN300 CBN350 CBN050C CBN060K CBN100P CBN160C CBN300P CBN400C External Internal CCLNR/L..3 S = Chamfered and honed WZ = Wiper geometry CNGN 321S-WZ [ Solid [ Stock standard Subject to change refer to current price and stock-list *See MN Turning for optional parts 92

089-119 PCBN Inserts.fm Page 93 Thursday, February 11, 2010 12:36 PM Secomax PCBN, Inserts CNMA Tolerances: s = ±.005 rε = ±.004 Size I.C. s rε 434 1/2 3/16 1/16 Uncoated Grades Coated Toolholders Inserts CNMA S = Chamfered and honed CBN10 CBN100 CBN150 CBN200 CBN300 CBN350 CBN050C CBN060K CNMA 434S [ CBN100P CBN160C CBN300P CBN400C External MCFNR/L..4 MCLNR/L..4 MCGNR/L..4 MCKNR/L..4 MCMNN..4 MCRNR/L..4 Internal..-MCLNR/L-4 Solid with hole CNMN Tolerances: s = ±.005 rε = ±.004 Size d s rε 32. 3/8 1/8 1/32-1/16 43. 1/2 3/16 1/32-1/16 Uncoated Grades Coated Toolholders Inserts CNMN CBN10 CBN100 CBN150 CBN200 CBN300 CBN350 CBN050C CBN060K CBN100P CBN160C CBN300P CBN400C CNMN 322S [ [ [ [ 322S-WZ [ 323S [ [ [ 324S [ [ [ External CCLNR/L..3 Internal..-MCLNR/L-3 E = Honed S = Chamfered and honed WZ = Wiper geometry Solid CNMN 433S [ [ [ 434S [ [ [ CNMN 434E [ MCFNR/L..4* MCLNR/L..4* MCGNR/L..4* MCKNR/L..4* MCMNN..4* MCRNR/L..4*..-MCLNR/L-4* CNMN 432S-WZ [ [ MCLNR/L..4*..-MCLNR-4* [ Stock standard Subject to change refer to current price and stock-list *See MN Turning for optional parts 93

089-119 PCBN Inserts.fm Page 94 Thursday, February 11, 2010 12:36 PM Secomax PCBN, Inserts DCGW Tolerances: d = ±.001 s = ±.005 rε = ±.004 Size I.C. s h rε 21.5. 1/4 3/32.110 1/128-1/32 32.5. 3/8 5/32.177 1/64-3/64 Uncoated Grades Coated Toolholders Inserts DCGW-L1 CBN10 DCGW 21.50.5S-00625-L1-B [ 21.51S-00625-L1-B [ [ 21.52S-00625-L1-B [ CBN100 CBN150 CBN200 CBN300 CBN350 CBN050C CBN060K CBN100P CBN160C CBN300P CBN400C External SDJCR/L-2 SDPCN-2 Internal..-SDUCR/L-2..-SDQCR/L-2 DCGW 21.51E-L1-B [ E = Honed S = Chamfered and honed B = Multi-corner DCGW 32.51S-00625-L1-B [ [ 32.52S-00625-L1-B [ [ 32.53S-00625-L1-B [ DCGW 32.51E-L1-B [ SDJCR/L..3 SDPCN..3..-SDQCR/L..3..-SDUCR/L..3 For tip sizes see MN Turning [ Stock standard Subject to change refer to current price and stock-list 94

089-119 PCBN Inserts.fm Page 95 Thursday, February 11, 2010 12:36 PM Secomax PCBN, Inserts DCMW Tolerances: s = ±.005 rε = ±.004 Size I.C. s h rε 21.5. 1/4 3/32.110 1/128-1/32 32.5. 3/8 5/32.177 1/128-1/32 Uncoated Grades Coated Toolholders Inserts DCMW CBN10 DCMW 32.50.5S-L0 [ 32.51S-L0 [ 32.52S-L0 [ CBN100 CBN150 CBN200 CBN300 CBN350 CBN050C CBN060K CBN100P CBN160C CBN300P CBN400C External SDJCR/L-3 SDPCN-3 Internal..-SDQCR/L-3..-SDUCR/L-3 DCMW...-B DCMW 21.50.5E-L0-B [ 21.51E-L0-B [ [ 21.52E-L0-B [ SDJCR/L-2 SDPCN-2..-SDUCR/L-2..-SDQCR/L-2 E = Honed S = Chamfered and honed B = Multi-corner For tip sizes see MN Turning DCMW 21.50.5S-L0-B [ [ 21.51S-L0-B [ [ [ [ 21.52S-L0-B [ [ [ DCMW 32.51E-L0-B [ 32.52E-L0-B [ DCMW 32.51S-L0-B [ [ 32.52S-L0-B [ [ SDJCR/L..3 SDPCN..3..-SDQCR/L..3..-SDUCR/L..3 DCMW 32.50.5E-L1-B [ 32.51S-L1-B [ 32.52S-L1-B [ [ Stock standard Subject to change refer to current price and stock-list 95

089-119 PCBN Inserts.fm Page 96 Thursday, February 11, 2010 12:36 PM Secomax PCBN, Inserts DNGA Tolerances: s = ±.005 rε = ±.004 Size I.C. s h rε 43. 1/2 3/16.203 1/64-3/64 44. 1/2 1/4.203 1/64-3/64 Uncoated Grades Coated Toolholders Inserts DNGA DNGA...-B CBN10 DNGA 431S-L0 [ 432S-L0 [ CBN100 CBN150 CBN200 CBN300 CBN350 DNGA 431S-L0-B [ [ 432S-L0-B [ [ CBN050C CBN060K CBN100P CBN160C CBN300P CBN400C External MDJNR/L..4* MDPNN..4* MDQNR/L..4* Internal..-MDUNR/L 4* DNGA 431S-00625-L0-B [ 432S-00625-L0-B [ E = Honed S = Chamfered and honed B = Multi-corner For tip sizes see MN Turning DNGA 432S-L1 [ 433S-L1 [ DNGA 432S-L1-B [ DNGA 431S-00625-L1-B [ 432S-00625-L1-B [ [ [ 433S-00625-L1-B [ DNGA 441S-L0 [ 442S-L0 [ DNGA 441S-L0-B [ 442S-L0-B [ [ DNGA 442S-00625-L0-B [ DNGA 441S-L1 [ 442S-L1 [ 443S-L1 [ DNGA 442S-L1-B [ 441S-00625-L1-B [ 442S-00625-L1-B [ [ [ 443S-00625-L1-B [ [ [ Stock standard* *See MN Turning for optional parts Subject to change refer to current price and stock-list 96

089-119 PCBN Inserts.fm Page 97 Thursday, February 11, 2010 12:36 PM Secomax PCBN, Inserts DNGN Tolerances: s = ±.005 rε = ±.004 Size I.C. s rε 322 3/8 1/8 1/32 323 3/8 1/8 3/64 Uncoated Grades Coated Toolholders Inserts DNGN CBN10 CBN100 DNGN 322E25 [ DNGN 322S [ 323S [ CBN150 CBN200 CBN300 CBN350 CBN050C CBN060K CBN100P CBN160C CBN300P CBN400C External MDJNR/L..3* MDQNR/L..3* MDPNN..3* Internal -..MDUNR/L 3* E = Honed S = Chamfered and honed Solid DNMA Tolerances: s = ±.005 rε = ±.004 Size *See MN Turning for optional parts I.C. s h rε 33 3/8 ±.002 3/16.150 1/32-1/16 43 1/2 ±.003 3/16.203 1/32-1/16 Uncoated Grades Coated Toolholders Inserts DNMA CBN10 CBN100 CBN150 CBN200 CBN300 CBN350 CBN050C CBN060K DNMA 332S [ 334S [ CBN100P CBN160C CBN300P CBN400C External MDJNR/L..3 MDPNN..3 MDQNR/L..3 Internal MDUNR/L-3 S = Chamfered and honed Solid with hole DNMA 432S [ 434S [ MDJNR/L..4 MDPNN..4 MDQNR/L..4 MDUNR/L-4 [ Stock standard Subject to change refer to current price and stock-list 97

089-119 PCBN Inserts.fm Page 98 Thursday, February 11, 2010 12:36 PM Secomax PCBN, Inserts DNMN Tolerances: s = ±.005 rε = ±.004 Size d s rε 322 3/8 1/8 1/32 323 3/8 1/8 3/64 324 3/8 1/8 1/16 Uncoated Grades Coated Toolholders Inserts DNMN CBN10 CBN100 CBN150 CBN200 CBN300 DNMN 322S [ 323S [ 324S [ CBN350 CBN050C CBN060K CBN100P CBN160C CBN300P CBN400C External MDJNR/L..3* MDQNR/L..3* MDPNN..3* Internal -..MDUNR/L 3* S = Chamfered and honed Solid [ Stock standard Subject to change refer to current price and stock-list *See MN Turning for optional parts 98

089-119 PCBN Inserts.fm Page 99 Thursday, February 11, 2010 12:36 PM Secomax PCBN, Inserts RCGN Tolerances: D = ±.0001 s = ±.005 Size D s 0803M0.315.125 Uncoated Grades Coated Toolholders Inserts RCGN-LF CBN10 CBN100 CBN150 CBN200 CBN300 CBN350 CBN050C RCGN 0803M0S-LF [ 0803M0S-01030-LF [ CBN060K CBN100P CBN160C CBN300P CBN400C External Internal *** S = Chamfered and honed LF = Complete top layer ***For information, contact your local Seco office RCGS Tolerance: s = ±.005 Size D s 2 1/4.359 Uncoated Grades Coated Toolholders Inserts RCGS RCGS 2S-LF [ CBN10 CBN100 CBN150 CBN200 CBN300 CBN350 CBN050C CBN060K CBN100P CBN160C CBN300P CBN400C External TRAOR/L..2 TRGOR/L..2 TROON..2 Internal S = Chamfered and honed LF = Complete top layer [ Stock standard Subject to change refer to current price and stock-list 99

089-119 PCBN Inserts.fm Page 100 Thursday, February 11, 2010 12:36 PM Secomax PCBN, Inserts RNGN-LF Tolerance: s = ±.005 Size I.C. s 22 1/4 1/8 32 3/8 1/8 43 1/2 3/16 Uncoated Grades Coated Toolholders Inserts RNGN-LF S = Chamfered and honed LF = Complete top layer CBN10 RNGN 22S-LF [ [ 22S-00625-LF [ [ 32S-LF [ [ 32S-00625-LF [ [ 43S-LF [ CBN100 CBN150 CBN200 CBN300 CBN350 CBN050C CBN060K CBN100P CBN160C CBN300P CBN400C External CRDNN..2 CRDNN..3 CRDNN..4** CRGNR/L..2 CRGNR/L..3 CRGNR/L..4** MRGNR/L..3 MRGNR/L..4* MRGOR/L..4* Internal..-CRGNR/L 2..-CRGNR/L 3..-CRGNR/L..4* *See MN Turning for optional parts ** Anvil 117.10-621 for RNGN 43, must be ordered separately. RNGN Tolerance: s = ±.005 Size I.C. s 22 1/4 1/8 32 3/8 1/8 42 1/2 1/8 Uncoated Grades Coated Toolholders Inserts RNGN E = Honed S = Chamfered and honed Solid CBN10 CBN100 CBN150 CBN200 CBN300 CBN350 CBN050C CBN060K CBN100P CBN160C RNGN 22E [ 22S-00625 [ [ 32E [ 32E25 [ RNGN 22S [ [ 32S [ [ [ 32S-00625 [ [ 42S [ CBN300P CBN400C External CRDNN..2 CRDNN..3 CRDNN..4 CRGNR/L..2 CRGNR/L..3 CRGNR/L..4 MRGNR/L..3 MRGNR/L..4* MRGOR/L..4* Internal..-CRGNR/L 2..-CRGNR/L 3..-CRGNR/L 4 [ Stock standard Subject to change refer to current price and stock-list *See MN Turning for optional parts 100

089-119 PCBN Inserts.fm Page 101 Thursday, February 11, 2010 12:36 PM Secomax PCBN, Inserts RNMN Tolerance: s = ±.005 Size I.C. s 22 1/4 1/8 32 3/8 1/8 42 1/2 1/8 43 1/2 3/16 83 1.0 3/16 84 1.0 1/4 Uncoated Grades Coated Toolholders Inserts RNMN E = Honed S = Chamfered and honed Solid CBN10 CBN100 RNMN 32E [ [ 42E [ [ RNMN 22S [ [ 32S [ [ [ [ 42S [ [ [ [ 43S [ [ [ [ 43S-01515 [ [ [ 63S-04020 [ 83S-06020 [ 84S-06020 [ CBN150 CBN200 CBN300 CBN350 CBN050C CBN060K CBN100P CBN160C CBN300P CBN400C External CRDNN..2 CRDNN..3 CRDNN..4 CRDNN..8 CRGNR/L..2 CRGNR/L..3 CRGNR/L..4** MRGNR/L..3 MRGNR/L..4* MRGNR/L..6 MRGOR/L..4* MRGOR/L..6 MRGOR/L..8 Internal..CRGNR/L 2..CRGNR/L 3..CRGNR/L 4 [ Stock standard Subject to change refer to current price and stock-list *See MN Turning for optional parts. **Alternate anvil 117.10-621 for RNMN43 to be ordered separately. 101

089-119 PCBN Inserts.fm Page 102 Thursday, February 11, 2010 12:36 PM Secomax PCBN, Inserts SCGW Tolerances: I.C. = ±.001 s = ±.005 rε = ±.004 Size I.C. s h rε 21. 1/4 3/32.114 1/32 32. 3/8 5/32.177 1/64-1/32 Uncoated Grades Coated Toolholders Inserts SCGW CBN10 CBN100 CBN150 CBN200 SCGW 21.52S-00420-LF [ CBN300 CBN350 CBN050C CBN060K CBN100P CBN160C CBN300P CBN400C External Internal SCGW 32.51S-00420-LF [ 32.52S-00420-LF [ S = Chamfered and honed LF = Complete top layer SCMN Tolerances: s = ±.005 rε = ±.004 Size I.C. s rε 332 3/8 3/16 1/32 Uncoated Grades Coated Toolholders Inserts SCMN CBN10 CBN100 CBN150 CBN200 CBN300 CBN350 CBN050C CBN060K SCMN 332S-WZ-85 [ CBN100P CBN160C CBN300P CBN400C External Internal S = Chamfered and honed WZ = Wiper geometry 85 = For holder with setting angle 85 Solid [ Stock standard Subject to change refer to current price and stock-list 102

089-119 PCBN Inserts.fm Page 103 Thursday, February 11, 2010 12:36 PM Secomax PCBN, Inserts SNGA Tolerances: s = ±.005 rε = ±.004 Size I.C. s h rε 432 1/2 3/16.203 1/32 Uncoated Grades Coated Toolholders Inserts SNGA CBN10 CBN100 CBN150 CBN200 CBN300 CBN350 CBN050C SNGA 432S-L1-D [ 432S-00625-L1-D [ CBN060K CBN100P CBN160C CBN300P CBN400C External MSSNR/L..4 MSRNR/L..4 MSDNN..4 MSKNR/L..4 CSKNR/L..4 Internal..-MSKNR/L 4..-CSKNR 4 D = Multi-corner S = Chamfered and honed For tip sizes see MN Turning SNGF Tolerances: s = ±.005 rε ±.004 Size I.C. s rε 322 3/8 1/8 1/32 Uncoated Grades Coated Toolholders Inserts SNGF CBN10 CBN100 CBN150 CBN200 CBN300 CBN350 CBN050C CBN060K CBN100P CBN160C CBN300P CBN400C SNGF 322E [ [ 323E [ External Internal E = Honed Solid [ Stock standard Subject to change refer to current price and stock-list 103

089-119 PCBN Inserts.fm Page 104 Thursday, February 11, 2010 12:36 PM Secomax PCBN, Inserts SNGN-LF Tolerances: s = ±.005 rε ±.004 Size I.C. s rε 432 1/2 3/16 1/32 Uncoated Grades Coated Toolholders Inserts SNGN-LF S = Chamfered and honed LF = Complete top layer SNGN 432S-LF [ CBN10 CBN100 CBN150 CBN200 CBN300 CBN350 CBN050C CBN060K CBN100P CBN160C CBN300P CBN400C External CSDNN..4** CSKNR/L..4** MSDNN..4* MSKNR/L..4* MSRNR/L..4* MSSNR/L..4* Internal..CSKNR/..4**..MSKNR/L..4* *See MN Turning for optional parts **Alternate anvil for SNMN43 to be ordered separately - 174.10-621 SNGN Tolerances: s = ±.005 rε ±.004 Size I.C. s rε 222 1/4 1/8 1/32 321 3/8 1/8 1/64 322 3/8 1/8 1/32 323 3/8 1/8 3/64 Uncoated Grades Coated Toolholders Inserts SNGN CBN10 CBN100 CBN150 CBN200 CBN300 CBN350 CBN050C CBN060K SNGN 222S [ [ CBN100P CBN160C CBN300P CBN400C External Internal S = Chamfered and honed SNGN 321S [ 322S [ 323S [ MSDNN..3 MSKNR/L..3 MSRNR/L..3..-CSKNR/L 3 Solid [ Stock standard Subject to change refer to current price and stock-list 104

089-119 PCBN Inserts.fm Page 105 Thursday, February 11, 2010 12:36 PM Secomax PCBN, Inserts SNMA Tolerances: s = ±.005 rε ±.004 Size I.C. s h rε 33. 3/8 3/16.150 1/32 43. 1/2 3/16.203 1/32-1/16 Uncoated Grades Coated Toolholders Inserts SNMA CBN10 CBN100 CBN150 CBN200 CBN300 CBN350 CBN050C CBN060K SNMA 332S-WZ-85 [ CBN100P CBN160C CBN300P CBN400C External Internal S = Chamfered and honed WZ = Wiper geometry 85 = For holder with setting angle 85 SNMA 434S [ MSSNR/L..4 MSRNR/L..4 MSDNN..4 MSKNR/L..4 CSKNR/L..4..-MSKNR/L..4..-CSKNR/L..4 Solid with hole [ Stock standard Subject to change refer to current price and stock-list 105

089-119 PCBN Inserts.fm Page 106 Thursday, February 11, 2010 12:36 PM Secomax PCBN, Inserts SNMN Tolerances: s = ±.005 rε ±.004 Size I.C. s rε 22. 1/4 1/8 1/32 32. 3/8 1/8 1/32-1/16 42. 1/2 1/8 1/16 43. 1/2 3/16 1/32-1/16 Uncoated Grades Coated Toolholders Inserts SNMN E = Honed S = Chamfered and honed WZ = Wiper geometry CBN10 CBN100 SNMN 222E [ [ SNMN 322E [ [ [ 323E [ [ SNMN 433E [ CBN150 CBN200 CBN300 SNMN 222S [ CBN350 CBN050C CBN060K CBN100P CBN160C CBN300P CBN400C External MSKNR/L..3 MSKNR/L..4* MSRNR/L..3 MSRNR/L..4* CSDNN..4** CSKNR/L..4** Internal..-CSKNR/L 3..-CSKNR/L 4**..-MSKNR/L 4* 85 = For holder with setting angle 85 Solid SNMN 322S [ [ [ 323S [ [ [ 324S [ 322S-WZ [ 322S-WZ-85 [ MSDNN..3 MSDNN..4* MSSNR/L..4* SNMN 423S [ SNMN 432S-WZ-85 [ [ 433S [ [ [ 434S [ [ [ 434S-01515 [ [ Stock standard Subject to change refer to current price and stock-list *See MN Turning for optional parts **Alternate anvil 174.10-621 for SNMN43 to be ordered separately 106

089-119 PCBN Inserts.fm Page 107 Thursday, February 11, 2010 12:36 PM Secomax PCBN, Inserts SPGW Tolerances: l = ±.001 s = ±.005 rε = ±.004 Size I.C. s h rε 22. 1/4 1/8.114 1/128 0703 5/16 1/8.138 1/32 Uncoated Grades Coated Toolholders Inserts SPGW SPGW 220.5S-00420-LF [ CBN10 CBN100 CBN150 CBN200 CBN300 CBN350 CBN050C CBN060K CBN100P CBN160C CBN300P CBN400C External Internal SPGW 070308S-01525-LF [ S = Chamfered and honed LF = Complete top layer TCGN Tolerances: s = ±.005 rε ±.004 Size I.C. s rε 1.2 5/32 3/64 1/64 Uncoated Grades Coated Toolholders Inserts TCGN TCGN 1.211E-LF [ CBN10 CBN100 CBN150 CBN200 CBN300 CBN350 CBN050C CBN060K CBN100P CBN160C CBN300P CBN400C External CTLNR/L..1.2 CTLCR/L..1.2 Internal E = Honed LF = Complete top layer [ Stock standard Subject to change refer to current price and stock-list 107

089-119 PCBN Inserts.fm Page 108 Thursday, February 11, 2010 12:36 PM Secomax PCBN, Inserts TCGW Tolerances: d = ±.001 s = ±.005 rε = ±.004 Size I.C. s h rε 1.81.5. 7/32 3/32.102 1/64-1/32 21.5. 1/4 3/32.114 1/64-1/32 Uncoated Grades Coated Toolholders Inserts TCGW CBN10 CBN100 CBN150 CBN200 TCGW 1.81.51S-00420-LF [ [ 1.81.52S-00420-LF [ [ CBN300 CBN350 CBN050C CBN060K CBN100P CBN160C CBN300P CBN400C External Internal TCGW...-C TCGW...-LF TCGW 21.51S-00420-LF [ [ 21.52S-00420-LF [ [ TCGW 21.51S-00625-L1 [ 21.51S-00625-L1-C [ 21.52S-00625-L1 [ 21.52S-00625-L1-C [ [ STFCR/L..2 STGCR/L..2 STDCR/L..2..STFCR/L-2..STUCR/L-2..STFCR/L-2 TCGW 21.51E-L1 [ 21.51E-L1-C [ E = Honed S = Chamfered and honed C = Multi-corner LF= Complete top layer For tip sizes see MN Turning [ Stock standard Subject to change refer to current price and stock-list 108

089-119 PCBN Inserts.fm Page 109 Thursday, February 11, 2010 12:36 PM Secomax PCBN, Inserts TCMW Tolerances: s = ±.005 rε ±.004 Size I.C. s h rε 21.51 1/4 3/32.110 1/64-1/32 21.52 1/4 3/32.110 1/64-1/32 Uncoated Grades Coated Toolholders Inserts TCMW CBN10 TCMW 21.51E-L0 [ 21.52E-L0 [ 21.51S-L0 [ 21.52S-L0 [ CBN100 CBN150 CBN200 CBN300 CBN350 CBN050C CBN060K CBN100P CBN160C CBN300P CBN400C External STGCR/L..2 STFCR/L..2 STDCR/L..2 Internal..-STFCR/L 2..-STUCR/L 2 TCMW...-C TCMW 21.51E-L0-C [ 21.52E-L0-C [ 21.51S-L0-C [ [ 21.52S-L0-C [ [ E = Honed S = Chamfered and honed C = Multi-corner For tip sizes see MN Turning TCMW 21.51S-L1-C [ 21.52S-L1-C [ 21.51S-00625-L1-C [ 21.52S-00625-L1-C [ [ Stock standard Subject to change refer to current price and stock-list 109

089-119 PCBN Inserts.fm Page 110 Thursday, February 11, 2010 12:36 PM Secomax PCBN, Inserts TNGA-L0/L1 Tolerances: s = ±.005 rε = ±.004 Size I.C. s h rε 33. 3/8 3/16.150 1/64-3/64 432 1/2 3/16.203 1/32 Uncoated Grades Coated Toolholders Inserts TNGA TNGA...-C S = Chamfered and honed C = Multi-corner For tip sizes see MN Turning CBN10 CBN100 CBN150 CBN200 CBN300 CBN350 TNGA 331S-L0 [ 332S-L0 [ 331S-L0-C [ 332S-L0-C [ [ 332S-00625-L0-C [ TNGA 331S-L1 [ 331S-00625-L1 [ 331S-00625-L1-C [ 332S-L1 [ 332S-L1-C [ TNGA 332S-00625-L1-C [ [ 333S-00625-L1-C [ TNGA 432S-L1 [ CBN050C CBN060K CBN100P CBN160C CBN300P CBN400C External MTJNRS..3 MTJNLS..3 MTGNR/L..3 MTFNR/L..3 MTENNS..3 MTRNR/L..3 MTJNRS..4 MTJNLS..4 MTGNR/L..4 MTFNR/L..4 MTENNS..4 MTLNR/L..4 MTRNR/L..4 MTWNR/L..4 Internal..-MTFNR/L 3..-MTKNR/L 3..-MTUNR/L 3..-MTFNR/L 4..-MTKNR/L 4..-MTUNR/L 4 [ Stock standard Subject to change refer to current price and stock-list 110

089-119 PCBN Inserts.fm Page 111 Thursday, February 11, 2010 12:36 PM Secomax PCBN, Inserts TNGA Tolerances: s = ±.005 rε = ±.004 Size I.C. s h rε 22 1/4 1/8.150 1/32 Uncoated Grades Coated Toolholders Inserts CBN10 CBN100 CBN150 CBN200 CBN300 CBN350 CBN050C CBN060K CBN100P CBN160C CBN300P CBN400C External Internal TNGA 222S [ MTGNR/L..2 MTFNR/L..2 MTENNS..2 S = Chamfered and honed WZ = Wiper geometry Solid with hole TNGN-LF Tolerances: s = ±.005 rε = ±.004 Size d s rε 221 1/4 1/8 1/64 222 1/4 1/8 1/32 223 1/4 1/8 3/64 Uncoated Grades Coated Toolholders Inserts TNGN S = Chamfered and honed LF = Complete top layer TNGN 221S-LF [ 222S-LF [ 222S-00625-LF [ 223S-LF [ 223S-00625-LF [ CBN10 CBN100 CBN150 CBN200 CBN300 CBN350 CBN050C CBN060K CBN100P CBN160C CBN300P TNGN 223S-00625-00625-LF [ CBN400C External CTFNR..2 CTJNR/L..2 Internal [ Stock standard Subject to change refer to current price and stock-list *See MN Turning for optional parts 111

089-119 PCBN Inserts.fm Page 112 Thursday, February 11, 2010 12:36 PM Secomax PCBN, Inserts TNGN Tolerances: s = ±.005 rε ±.004 Size I.C. s rε 22. 1/4 1/8 1/64-3/64 32. 3/8 1/8 1/64 33. 3/8 3/16 1/32 Uncoated Grades Coated Toolholders Inserts TNGN E = Honed S = Chamfered and honed WZ = Wiper geometry Solid CBN10 CBN100 CBN150 CBN200 CBN300 CBN350 TNGN 221E [ [ 222E [ [ 222E25 [ 221S [ [ 222S [ [ 222S-00625 [ [ 222S-00625-WZ [ 223S [ [ 223S-00625 [ [ TNGN 321S [ CBN050C CBN060K CBN100P CBN160C CBN300P CBN400C External CTJNR/L..2 CTFNR/L..2 MTGNR/L..3** MTFNR/L..3** MTRNR/L..3** MTCNN..3** Internal [ Stock standard Subject to change refer to current price and stock-list **See MN Turning for optional parts **Anvil ITSN 333 for insert TNGN 32.., to be ordered separately 112

089-119 PCBN Inserts.fm Page 113 Thursday, February 11, 2010 12:36 PM Secomax PCBN, Inserts TNGX Tolerances: I.C. = ±.001 s = ±.005 rε = ±.004 Size I.C. s rε 221 1/4 1/8 1/64 222 1/4 1/8 1/32 Uncoated Grades Coated Toolholders Inserts TNGX...-WZ CBN10 CBN100 CBN150 CBN200 CBN300 CBN350 TNGX 221S-WZ [ [ 221S-00625-WZ [ 222S-WZ [ [ 222S-00625-WZ [ CBN050C CBN060K CBN100P CBN160C CBN300P CBN400C External CTJNR/L..2 MTGNR/L..2* MTFNR/L..2* Internal S = Chamfered and honed WZ = Wiper geometry Solid TNGX...L/R-WZ Crossbill TNGX 222S-R-WZ [ TNGX 222S-L-WZ [ CTJNR/L..2 S = Chamfered and honed WZ = Wiper geometry Solid Right-hand version shown [ Stock standard Subject to change refer to current price and stock-list *See MN Turning for optional parts 113

089-119 PCBN Inserts.fm Page 114 Thursday, February 11, 2010 12:36 PM Secomax PCBN, Inserts TNMN Tolerances: s = ±.005 rε = ±.004 Size I.C. s rε 22. 1/4 1/8 1/64-3/64 33. 3/8 3/16 3/64 Uncoated Grades Coated Toolholders Inserts TNMN E = Honed S = Chamfered and honed CBN10 CBN100 CBN150 CBN200 CBN300 TNMN 221E [ 222E [ 223E [ TNMN 221S [ 222S [ [ 223S [ [ CBN350 CBN050C CBN060K CBN100P CBN160C CBN300P CBN400C External CTJNR/L..2 CTFNR/L..2 MTFNR/L..2* MTGNR/L..2* Internal Solid TNMN 333S [ [ MTRNR/L..3* MTCNN..3* MTGNR/L..3* MTFNR/L..3* -..MTUNR/L 3* -..MTFNR/L 3* -..MTKNR/L 3* [ Stock standard Subject to change refer to current price and stock-list *See MN Turning for optional parts 114

089-119 PCBN Inserts.fm Page 115 Thursday, February 11, 2010 12:36 PM Secomax PCBN, Inserts TNMX Tolerances: s = ±.005 rε = ±.004 Size I.C. s rε 222 1/4 1/8 1/32 Uncoated Grades Coated Toolholders Inserts TNMX...-WZ CBN10 CBN100 CBN150 CBN200 CBN300 CBN350 CBN050C CBN060K TNMX 222S-WZ [ CBN100P CBN160C CBN300P CBN400C External Internal CTJNR/L..2 S = Chamfered and honed WZ = Wiper geometry Solid TPGN Tolerances: s = ±.005 rε ±.004 Size I.C. s rε 22. 1/4 1/8 1/64-1/32 Uncoated Grades Coated Toolholders Inserts TPGN TPGN 222E [ TPGN 221S [ 222S [ CBN10 CBN100 CBN150 CBN200 CBN300 CBN350 CBN050C CBN060K CBN100P CBN160C CBN300P CBN400C External CTGPR/L..2 CTFPR/L..2 CTRPR/L..2 CTWPR/L..2 Internal E = Honed S = Chamfered and honed Solid [ Stock standard Subject to change refer to current price and stock-list 115

089-119 PCBN Inserts.fm Page 116 Thursday, February 11, 2010 12:36 PM Secomax PCBN, Inserts VBGW Tolerances: s = ±.005 rε ±.004 Size d s h rε 33. 3/8 3/16.150 1/128-1/32 Uncoated Grades Coated Toolholders Inserts VBGW CBN10 VBGW 330.5S-L0 [ VBGW 332E-L2 [ CBN100 CBN150 CBN200 CBN300 CBN350 CBN050C CBN060K CBN100P CBN160C CBN300P CBN400C External SVLBR/L..3 SVVBN..3 Internal For tip sizes see MN Turning VBGW 331S-L2 [ 332S-L2 [ VBGW...-B VBGW 331S-L0-B [ 331S-00625-L0-B [ 332S-L0-B [ 332S-00625-L0-B [ E = Honed S = Chamfered and honed B = Multi Tipped VBGW 330.5E-L1-B [ 331E-L1-B [ 332E-L1-B [ For tip sizes see MN Turning VBGW 330.5S-00625-L1-B [ [ 331S-00625-L1-B [ [ 332S-00625-L1-B [ [ [ Stock standard Subject to change refer to current price and stock-list 116

089-119 PCBN Inserts.fm Page 117 Thursday, February 11, 2010 12:36 PM Secomax PCBN, Inserts VNGA Tolerances: s = ±.005 rε ±.004 Size d s h rε 33. 3/8 3/16.150 1/128-1/32 Uncoated Grades Coated Toolholders Inserts VNGA CBN10 VNGA 330.5S-L0 [ 331S-L0 [ 332S-L0 [ CBN100 CBN150 CBN200 CBN300 CBN350 CBN050C CBN060K CBN100P CBN160C CBN300P CBN400C External MVJNR/L..3 MVTNR/L..3 Internal..-MVPNR/L 3..-MVLNR/L 3..-MVUNR 3 VNGA...-B VNGA 331S-L0-B [ 331S-00625-L0-B [ 332S-L0-B [ 332S-00625-L0-B [ S = Chamfered and honed B = Multi-corner For tip sizes see MN Turning VNGA 330.5S-00625-L1-B [ 331S-L1-B [ 331S-00625-L1-B [ 332S-L1-B [ VNGA 332S-00625-L1-B [ VNGA 331S-L2 [ 332S-L2 [ [ Stock standard Subject to change refer to current price and stock-list 117

089-119 PCBN Inserts.fm Page 118 Thursday, February 11, 2010 12:36 PM Secomax PCBN, Inserts VNMA Tolerances: d = ±.002 s = ±.005 rε ±.004 Size I.C. s h rε 2.53 5/16 3/16.150 1/32-1/16 33 3/8 3/16.150 1/32-1/16 Uncoated Grades Coated Toolholders Inserts VNMA CBN10 CBN100 CBN150 CBN200 CBN300 VNMA 2.532S [ 2.534S [ CBN350 CBN050C CBN060K CBN100P CBN160C CBN300P CBN400C External PVJNR/L..2.5 Internal..-PVJNR/L-2.5 E = Honed S = Chamfered and honed VNMA 332S [ 334S [ MVJNR/L..3 MVTNR/L..3..-MVPNR/L-3..-MVLNR/L-3..-MVUNR-3 Solid with hole WNGA Tolerances: d = ±.001 s = ±.005 rε = ±.004 Size I.C. s h rε 33 3/8 3/16.150 1/64-3/64 Uncoated Grades Coated Toolholders Inserts WNGA CBN10 CBN100 CBN150 CBN200 CBN300 CBN350 CBN050C CBN060K WNGA 331S [ 331S-00625 [ CBN100P CBN160C CBN300P CBN400C External MWLNR/L..3 Internal..-MWLNR/L-3 S = Chamfered and honed WZ = Wiper Solid with hole WNGA 332S [ 332S-00625 [ WNGA 333S [ 333S-00625 [ WNGA 332S-WZ [ 332S-00625-WZ [ [ Stock standard Subject to change refer to current price and stock-list 118

089-119 PCBN Inserts.fm Page 119 Thursday, February 11, 2010 12:36 PM Secomax PCBN, Inserts WNGA-L0/L1 Tolerances: s = ±.005 rε = ±.004 Size d s h rε 33 3/8 3/16.150 1/32 43 1/2 3/16.203 1/64-7/128 Uncoated Grades Coated Toolholders Inserts WNGA WNGA 332S-L1-C [ CBN10 CBN100 CBN150 CBN200 CBN300 CBN350 CBN050C CBN060K CBN100P CBN160C CBN300P CBN400C External MWLNR/L..3 Internal..-MWLNR/L-3 S = Chamfered and honed C = Multi Tipped WZ = Wiper geometry For tip sizes see MN Turning WNGA 431S-L0-C [ 432S-L0-C [ 432S-L0-WZ-C [ 433S-00625-L0-WZ-C [ WNGA 432S-00625-L1-C [ [ 432S-00625-L1-WZ-C [ 433S-00625-L1-WZ-C [ 433.5S-L1-C [ MWLNR/L..4 MWLNR/L..4..-MWLNR-4 WNMA Tolerances: d = ±.003 s = ±.005 rε = ±.004 Size d s h rε 33 3/8 3/16.150 1/32-1/16 43 1/2 3/16.150 1/32-1/16 Uncoated Grades Coated Toolholders Inserts WNMA CBN10 CBN100 CBN150 CBN200 CBN300 CBN350 CBN050 WNMA 332S [ 334S [ CBN060K CBN100 CBN160 CBN300 CBN400 External MWLNR/L..3 Internal..-MWLNR/L-3 S = Chamfered and honed WNMA 432S [ 434S [ MWLNR/L..4..-MWLNR-4 Solid with hole [ Stock standard Subject to change refer to current price and stock-list 119

MDT Code keys External toolholders C 1 F 2 I 3 R 4-100 - 04 D - 5 6 7 R 8 4.00 9 2.75 10 1. Insert clamping 2. Toolholder setting angle C Clamp = G = 0 R = 15 T = 30 S = 45 W = 60 K = 75 F = 90 B = 105 E = 120 D = 135 I = 90 (no offset) 3. Maximum grooving/turning depth 4. Version E = 1.0 x a p F = 1.5 x a p G = 2.0 x a p H = 2.5 x a p I = 3.0 x a p J = 3.5 x a p K = 4.0 x a p L = 4.5 x a p M = 5.0 x a p N = 5.5 x a p O = 6.0 x a p S = 8.0 x a p X = Special R L 5. Shank height/width 6. Seat size Seat Size 03 04 05 06 08 Metric Insert 3 mm 4 mm 5 mm 6 mm 8 mm Inch Insert.125.187.250 050 =.50 063 =.625 075 =.75 100 = 1.00 125 = 1.25 150 = 1.50 120 120-133 MDT Tech.indd 120 2/12/2010 1:31:50 PM

MDT Code keys External toolholders 7. Tool length 8. Tang curvature direction L A = 4 B = 4.5 C = 5 D = 6 E = 7 Additional information for axial machining R 9. Maximum diameter 10. Minimum diameter 4.00 = 4.00 in (D 1 ) 2.75 = 2.75 in (D 2 ) Additional information for axial machining Additional information for axial machining 121 120-133 MDT Tech.indd 121 2/12/2010 1:31:51 PM

MDT Code keys Internal toolholders A 1 24 2 - C G G R - 3 4 5 6 04 7 1. Toolholder type 2. Shank diameter 3. Insert clamping A = Steel with coolant passage S = Solid steel C 10 =.625 12 =.75 16 = 1.0 20 = 1.25 24 = 1.5 Clamp 4. Toolholder setting angle 5. Maximum grooving/turning depth = G = 0 R = 15 T = 30 S = 45 W = 60 K = 75 F = 90 B = 105 E = 120 D = 135 E = 1.0 x a p F = 1.5 x a p G = 2.0 x a p H = 2.5 x a p I = 3.0 x a p J = 3.5 x a p K = 4.0 x a p L = 4.5 x a p M = 5.0 x a p N = 5.5 x a p X = Special 6. Version 7. Seat size Seat Size 03 04 05 06 Metric Insert 3 mm 4 mm 5 mm 6 mm Inch Insert.125.187.250 R L 122 120-133 MDT Tech.indd 122 2/12/2010 1:31:52 PM

MDT Code keys Inserts, inch L 1 C 2 M 3 F 4 16 5 05 6 05 7 - A 187-8 9 MT 10 1. Shape 3. Tolerances L Rectangular 2. Front clearance angle A = 3 B = 5 C = 7 D = 15 E = 20 Tol. class Tolerance ± inch For insert width a p inch a p d r m l.125.187.250 M.002.002.002.003.004 4. Insert type 6. Insert gauge width 7. Corner radius R Single Ended with Chipbreaker Seat size 03 = 3.0 mm 04 = 4.0 mm 05 = 5.0 mm 06 = 6.0 mm 02 =.008 (0.2 mm) 05 =.020 (0.5 mm) F Double Ended with Chipbreakers 8. Inch Size 10. Insert type code N A 5. Insert gauge length Single Ended without Chipbreaker Double Ended without Chipbreakers 9. Insert width 125 =.125 187 =.187 250 =.250 FT = Chipbreaker for Fine turning GG = Ground grooving GS = Ground sharp grooving MC = Chipbreaker for deep grooving and cut- off MG = Chipbreaker for Medium grooving MP = Chipbreaker for Medium profiling MT = Chipbreaker for Medium turning FG = For lockrings DY = For dynamic o-rings ST = For static o-rings R = For radius D76 = For thread undercuts MCR/L = Right or left hand version with a specified setting angle 123 120-133 MDT Tech.indd 123 2/12/2010 1:31:53 PM

MDT Code keys Inserts, metric L 1 C 2 M 3 F 4 16 5 04 6 08 7-0400 - 8 9 10 MT 11 1. Shape 3. Tolerances L Rectangular 2. Front clearance angle C = 7 Tol. class G M Tolerance ± mm For insert width a p mm a p d r l 3 4 5 6 8 0.025 0.025 0.025 0.040 0.05 0.05 0.05 0.08 4. Insert type 6. Insert gauge width 7. Corner radius R Single ended with chipbreaker Seat size F N Double ended with chipbreaker Single ended without chipbreaker 9. Insert width M0,00 = Round 02 =.008 04 =.016 05 =.020 06 =.024 08 =.031 10 =.039 12 =.047 A 5. Insert gauge length 8. Side clearance radius L Double ended without chipbreaker R 10. Version 0300 =.118 (3 mm) 0400 =.157 (4 mm) 0500 =.197 (5 mm) 0600 =.236 (6 mm) 0800 =.315 (8 mm) R L 11. Insert type code FT = Chipbreaker for Fine turning GG = Ground grooving GS = Ground sharp grooving MC = Chipbreaker for deep grooving and cut- off MG = Chipbreaker for Medium grooving MP = Chipbreaker for Medium profiling MT = Chipbreaker for Medium turning FG = For lockrings DY = For dynamic o-rings ST = For static o-rings R = For radius D76 = For thread undercuts MCR/L = Right or left hand version with a specified setting angle 124 120-133 MDT Tech.indd 124 2/12/2010 1:31:54 PM

MDT 125 120-133 MDT Tech.indd 125 2/12/2010 1:32:15 PM

MDT Inserts Grades The application area for each grade is shown in the charts below. The black areas in the chart indicate a grade s main ISO application groups and the white areas indicate other supplementary application groups. Grades MDT Secolor Easy conditions Grooving Difficult conditions Easy conditions Turning Difficult conditions Easy conditions: pre-machined surface, shallow grooves etc. Difficult conditions: raw surface, deep grooves etc. 126 120-133 MDT Tech.indd 126 2/12/2010 1:32:30 PM

MDT Inserts Grades TGP25 New Grade, New Technology, Impressive Results Not only does this grade feature DURATOMIC coating technology, it also marks the begininng of a new generation for grooving and cut-off. Although TGP25 was intended for steel machining it can also be used in cast iron and stainless steel with impressive results. TGP25 CP200 CP500 CVD-coated grade for steel, stainless steel and cast iron. Use high cutting speed. Ti(C,N) + Al2O3 DURATOMIC First choice for high-strength steel, martensitic stainless steel, cast iron with low hardness and aerospace alloys. First choice for high cutting speeds. Hard micrograin with sharp edge, highly resistant to plastic deformation. PVD-coated grade. (Ti, Al) N + TiN Basic choice. PVD -coated micrograin grade. (Ti, Al) N + TiN CP600 TP200 First choice for general machining in steel and stainless steel with MC chipbreaker. Also suitable for superalloys. PVD-coated grade. (Ti, Al) N + TiN For higher cutting speeds. CVD-coated grade. Ti (C, N) + Al 2O3 + TiN 883 For roughing operations in superalloys. 890 For machining in superalloys. Also suitable for hardened steel and cast iron. 127 TK150 Basic choice for grey cast iron and nodular cast iron. Ti (C, N) + Al 2 O 3 TGP25 The New Grade For Groove Turning The unique and secure clamping system of Seco Multi Directional Turning (MDT) allows high speeds and feeds while securing long and consistent tool life. The rigidity of Seco MDT can be used to fully exploit the extended cutting data capability of TGP25. Available in all widths, corner radii and chipbreakers, TGP25 gives outstanding performance over a large application area and its superior edge integrity ensures an excellent surface finish too. 127 120-133 MDT Tech.indd 127 2/12/2010 1:32:34 PM

MDT - Cutting data Cutting speed Classify the workpiece material into a Seco Material Group to get a cutting speed recommendation based on workpiece material insert width and grade feed rate For workpiece material classification see pages 266-271. Seco Material Group No. 1 2 3 4 5 6 7 8 9 Cutting speed, vc (sf/min) CP500 CP600 TP200/CP200 883/890 TK150 TGP25 Insert width, ap (mm) 3.04.0 4.56.0 8.010.0 3.04.0 4.56.0 8.010.0 8.010.0 3.08.0 3.04.0 4.56.0 8.010.0 790 690 620 520 690 620 560 480 640 570 490 430 520 480 410 360 460 410 340 330 430 360 330 300 260 250 230 210 590 520 480 430 510 480 410 380 690 620 560 460 390 620 560 490 430 390 560 510 440 390 360 480 390 360 330 310 410 340 310 280 250 360 330 300 260 230 230 210 180 160 520 480 410 360 310 480 410 380 330 280 520 490 410 330 490 430 390 330 460 410 360 330 340 330 300 260 300 260 230 200 300 250 210 180 160 150 110 100 410 360 310 260 360 330 280 230 720 660 570 490 660 570 510 430 590 540 480 410 490 430 390 340 410 360 330 300 410 340 310 260 250 230 210 180 560 490 430 390 480 430 390 360 920 890 820 790 790 690 640 560 750 690 620 560 740 670 620 570 660 620 560 520 570 510 480 430 430 390 360 340 660 610 560 510 570 520 480 430 850 790 720 670 640 690 640 570 510 460 670 640 570 510 480 670 640 570 520 490 620 560 510 480 430 510 480 430 390 360 390 360 340 330 310 610 560 490 430 390 520 480 430 380 330 670 620 570 520 570 510 480 410 570 520 480 430 590 520 490 460 490 480 410 390 430 390 340 330 340 330 310 300 490 430 360 310 410 390 330 300 950 920 870 820 790 820 740 660 590 560 790 740 660 590 560 750 690 620 560 520 690 660 590 560 520 620 560 510 480 440 480 430 410 390 360 1120 1070 980 950 950 840 770 670 920 840 750 670 890 820 750 670 790 750 670 640 690 620 570 520 480 440 410 390 720 670 620 570 640 590 520 480 1030 950 870 820 770 840 770 690 620 560 820 770 690 620 570 820 770 690 640 590 750 670 620 570 520 620 570 520 480 440 440 410 390 360 340 670 620 540 480 440 590 520 480 430 360 820 750 690 640 690 620 570 490 690 640 570 520 720 640 590 560 590 570 490 480 520 480 430 390 390 360 340 330 540 480 410 340 460 440 360 330 Feed f in/rev.004.008.012.016.020.004.008.012.016.020.004.008.012.016.020.004.008.012.016.020.004.008.012.016.020.004.008.012.016.020.004.008.012.016.020.004.008.012.016.020.004.008.012.016.020 128 120-133 MDT Tech.indd 128 2/12/2010 1:32:35 PM

MDT - Cutting data Cutting speed Seco Material Group No. 10 11 12 13 14 15 16 17 Cutting speed, vc (sf/min) CP500 CP600 TP200/CP200 883/890 TK150 TGP25 Insert width, ap (mm) 3.04.0 4.56.0 8.010.0 3.04.0 4.56.0 8.010.0 8.010.0 3.08.0 3.04.0 4.56.0 8.010.0 490 430 390 360 310 280 260 230 440 410 340 310 360 330 280 250 210 340 310 260 230 340 310 260 230 1440 1180 1020 920 850 1150 950 800 720 660 430 390 330 300 280 310 280 260 230 410 360 310 260 250 330 300 260 230 210 310 260 250 210 180 310 260 250 210 180 1310 1070 920 820 770 1030 850 720 660 590 360 300 250 210 280 260 230 210 330 260 230 210 250 230 200 200 230 210 180 160 230 210 180 160 980 820 740 690 940 770 660 590 540 460 410 380 330 300 260 230 210 1310 1080 920 820 750 1050 850 720 660 590 560 490 460 410 590 560 510 480 490 460 410 360 430 390 340 310 430 390 340 310 490 460 390 360 310 560 510 440 410 390 460 410 390 340 330 390 340 330 300 250 390 340 330 300 250 410 380 300 260 480 390 340 330 360 340 330 310 310 300 280 230 310 300 280 230 160 130 110 330 280 260 250 330 280 250 210 300 250 210 160 250 210 160 130 660 620 570 540 490 560 510 480 430 390 520 490 430 390 360 490 460 410 380 330 620 540 510 460 800 750 690 660 670 620 560 490 590 540 480 430 590 540 480 430 540 510 440 410 340 750 690 610 560 540 620 560 540 480 440 540 480 440 410 340 540 480 440 410 340 1410 1150 980 890 1120 920 770 690 460 430 330 300 660 540 480 440 490 480 440 430 430 410 380 310 430 410 380 310 Feed f in/rev.004.008.012.016.020.004.008.012.016.020 004.008.012.016.020.004.008.012.016.020.004.008.012.016.020.004.008.012.016.020.004.008.012.016.020.004.008.012.016.020 Cutting data for grade 883, 890 CP200 and CP500 for superalloys and titanium alloys Machinability factor Type of application Initial values D.O.C ap (in) Feed f (in/rev) Cutting speed, vc (sf/min) Machinability factor 4.5-4.2 4.1-3.9 3.8-3.5 3.4-3.1 3.0-2.8 2.7-2.4 2.3-2.0 1.9-1.7 1.6-1.3 1.2-0.9 0.8-0.5 0.4-0.1 F.010.059.003.008 490 460 440 430 390 2.84.5 M.039.118.004.010 380 360 330 310 300 R.059.197.008.016 250 230 210 200 160 F.008.059.004.010 250 250 210 1.72.7 M.039.118.006.012 200 180 160 R.059.197.008.016 150 130 110 F.008.059.004.010 200 180 0.91.6 M.039.118.006.012 150 130 R.059.197.008.016 110 80 F.008.059.004.010 110 70 0.10.8 M.039.118.006.012 80 50 R.059.197.008.016 70 30 The machinability factor for specific materials is found in the table on page 272. 129 120-133 MDT Tech.indd 129 2/12/2010 1:32:35 PM

MDT Inserts LCMF Basic choice Double-ended Economy (cutting edges at both ends) Size 13 For machining in small bore sizes and axial machining at small diameters Size 16 For general machining Size 30 For heavy machining MDT13 MDT16 MDT30 LCMR Single-ended Flexibility Reach (full length clearance) Size 13 For machining in small bore sizes and axial machining at small diameters Size 16 For general machining Size 30 For heavy machining MDT13 MDT16 MDT30 LCG_ Special applications Standard and (customer specified) tailor made profiles Double or single ended With or without chipbreaker Size 13 For machining in small bore sizes and axial machining at small diameters Size 16 For general machining Size 30 For heavy machining MDT13 MDT16 MDT30 MDT16 MDT30 Select narrow inserts if small cutting depths and feed rates are to be used. Select wide inserts if large cutting depths and feed rates are to be used. 130 120-133 MDT Tech.indd 130 2/12/2010 1:32:37 PM

MDT Inserts FT (Fine Turning) For fine turning For deep grooving MT (Medium Turning) For medium turning For shallow grooving MG (Medium Grooving) For deep grooving For Cut-off For medium turning Improves the chipbreaking MP (Medium Profiling) For medium profiling For medium turning For medium grooving Good accessibility MC (Medium Cut-off) For parting off thin walled pipes and small diameter workpieces For deep grooving For turning Reduces vibration risk A55/A60 G55/G60 For threading applications GG (Ground Grooving) Grooving Super Alloys and Steel Positive rake GS (Ground Sharp Grooving) Grooving Non-ferrous materials Positive rake 131 120-133 MDT Tech.indd 131 2/12/2010 1:32:39 PM

MDT Application tecnhnique Modular holders, calculation of dimensions after mounting Example, left hand version (L) Blade holder GL (alternative Seco Capto GL). Blade type V21-C.R130.L.. l 1 = l 1 holder + f 1 blade f 1 = f 1 holder + l 1 blade Example, right hand version (R) Blade holder GR (alternative Seco Capto GR). Blade type V21-C.L130.R.. l 1 = l 1 holder + f 1 blade f 1 = f 1 holder + l 1 blade Example, right hand version (R) Blade holder FR (alternative Seco Capto FR). Blade type V21-C.R130.L.. l 1 = l 1 holder + l 1 blade f 1 = f 1 holder + f 1 blade Example, left hand version (L) Blade holder FL (alternative Seco Capto FL). Blade type V21-C.L130.R.. l 1 = l 1 holder + l 1 blade f 1 = f 1 holder + f 1 blade For more detailed application information regarding new tools please see the Face Machining Calculator on www.secotools.com 132 120-133 MDT Tech.indd 132 2/12/2010 1:32:49 PM

MDT Application tecnhnique Modular holders, calculation of dimensions after mounting Example, left hand version (L) Blade holder FL (alternative Seco Capto FL). Blade type V21-C.L130.L.. l 1 = l 1 holder + l 1 blade f 1 = f 1 holder + f 1 blade Example, right hand version (R) Blade holder FR (alternative Seco Capto FR). Blade type V21-C.R130.R.. l 1 = l 1 holder + l 1 blade f 1 = f 1 holder + f 1 blade Example, left hand version (L) Blade holder A..FL (alternative Seco Capto A..FL). Blade type V21-C.L130.L.. l 1 = l 1 holder + l 1 blade f 1 = f 1 holder + f 1 blade Example, right hand version (R) Blade holder A..FR (alternative Seco Capto A..FR). Blade type V21-C.R130.R.. l 1 = l 1 holder + l 1 blade f 1 = f 1 holder + f 1 blade For more detailed application information regarding new tools please see the Face Machining Calculator on www.secotools.com 133 120-133 MDT Tech.indd 133 2/12/2010 1:32:56 PM

134 MDT External.fm Page 134 Thursday, February 11, 2010 12:41 PM MDT - Toolholders, external Toolholders for inserts LCMF, LCMR and LCGN CFSR/L Long reach toolholders Inserts, please see pages 157-165 Right-hand version shown Application h b l 1 f 1 l 3 a r * D m2 Seat size Spare Parts, Parts included in delivery Clamp screw 3 CFSR 100 03D 1.00 1.00 6 1.25 1.81 0.95 7.70 1.54 3 LC..1603.. 125 03D 1.25 1.25 6 1.50 1.81 0.95 7.70 2.20 3 LC..1603.. CFSL 100 03D 1.00 1.00 6 1.25 1.81 0.95 7.70 1.54 3 LC..1603.. 125 03D 1.25 1.25 6 1.50 1.81 0.95 7.70 2.20 3 LC..1603.. 4 CFSR 100 04E 1.00 1.00 6 1.25 2.17 1.26 7.70 1.76 4 LC..1604.. 125 04E 1.25 1.25 6 1.50 2.17 1.26 7.70 2.42 4 LC..1604.. CFSL 100 04E 1.00 1.00 6 1.25 2.17 1.26 7.70 1.76 4 LC..1604.. 125 04E 1.25 1.25 6 1.50 2.17 1.26 7.70 2.42 4 LC..1604.. 5 CFSR 100 05E 1.00 1.00 6 1.25 2.60 1.58 7.70 1.54 5 LC..1605.. 125 05E 1.25 1.25 6 1.50 2.60 1.58 7.70 2.42 5 LC..1605.. CFSL 100 05E 1.00 1.00 6 1.25 2.60 1.58 7.70 1.54 5 LC..1605.. 125 05E 1.25 1.25 6 1.50 2.60 1.58 7.70 2.42 5 LC..1605.. 6 CFSR 100 06F 1.00 1.00 6 1.25 3.19 1.89 7.70 1.98 6 LC..1606.. 125 06F 1.25 1.25 6 1.50 3.19 1.89 7.70 2.86 6 LC..1606.. CFSL 100 06F 1.00 1.00 6 1.25 3.19 1.89 7.70 1.98 6 LC..1606.. 125 06F 1.25 1.25 6 1.50 3.19 1.89 7.70 2.86 6 LC..1606.. 8 CFSR 125 08F 1.25 1.25 7 1.50 4.11 2.52 7.70 2.52 8 LC..3008.. CFSL 125 08F 1.25 1.25 7 1.50 4.11 2.52 7.70 2.52 8 LC..3008.. *Max depth of cut for LCMF16.. =.550 in., LCMF30.. = 1.100 in. Key Toolholder/ Insert dimension CF..03.. TCEI0513 4 SMS795 CF..04.. TCEI0613 5 SMS795 CF..05.. TCEI0613 5 SMS795 CF..06.. TCEI0815 6 SMS795 CF..08.. TCEI1020 6 SMS795 Please check availability in current price and stock-list 134

135 MDT Internal.fm Page 135 Thursday, February 11, 2010 1:26 PM MDT - Toolholders, internal Toolholders for inserts LCGN, LCMF and LCMR CG.R/L Inserts, please see pages 157-165 Right-hand version shown Application dm m l 1 l 3 f 1 a r min Seat size Spare Parts, Parts included in delivery 03 A20 -CGIR 03 1.25 12 2.36 0.930.355 1.26 3.3 3 LC..1603.. -CGIL 03 1.25 12 2.36 0.930.355 1.26 3.3 3 LC..1603.. A24 -CGGR 03 1.50 12 2.36 1.125.440 1.80 5.5 3 LC..1603.. -CGGL 03 1.50 12 2.36 1.125.440 1.80 5.5 3 LC..1603.. 04 A20 -CGGR 04 1.25 12 2.36 0.930.355 1.26 3.3 4 LC..1604.. -CGGL 04 1.25 12 2.36 0.930.355 1.26 3.3 4 LC..1604.. A24 -CGGR 04 1.50 12 2.36 1.125.440 1.80 5.5 4 LC..1604.. -CGGL 04 1.50 12 2.36 1.125.440 1.80 5.5 4 LC..1604.. 05 A20 -CGFR 05 1.25 12 2.36 0.930.355 1.26 3.3 5 LC..1605.. -CGFL 05 1.25 12 2.36 0.930.355 1.26 3.3 5 LC..1605.. A24 -CGGR 05 1.50 12 2.36 1.091.440 1.80 5.5 5 LC..1605.. -CGGL 05 1.50 12 2.36 1.091.440 1.80 5.5 5 LC..1605.. 06 A20 -CGFR 06 1.25 12 2.36 0.930.355 1.26 3.3 6 LC..1606.. -CGFL 06 1.25 12 2.36 0.930.355 1.26 3.3 6 LC..1606.. A24 -CGGR 06 1.50 12 2.36 1.130.515 1.80 5.5 6 LC..1606.. -CGGL 06 1.50 12 2.36 1.130.515 1.80 5.5 6 LC..1606.. Clamp screw Key Coolant adaptor* Toolholder/ Insert dimension A20-..03 L85011-T15P T15P-3 SEAL32 A20..04/05 L85011-T15P T15P-3 SEAL32 A20..06 L86015-T20P T20P-3 SEAL32 A24-..03 MC6S 4x14 3 SMS795 SEAL40 A24-..04/05 MC6S 5x14 4 SMS795 SEAL40 A24-..06 TCEI0614 5 SMS795 SEAL40 Please check availability in current price and stock-list *To be ordered separately 135

136-144 MDT JetStream Ext.fm Page 136 Thursday, February 11, 2010 12:50 PM Jetstream Tooling, MDT Toolholders, external Toolholders for inserts LCMF, LCMR and LCGN CFIR/L..-Jet Face machining toolholders Inserts, please see pages 157-165 Initial plunge range e.g. 9.0/5.5 inch face groove diameter Right-hand version with right-hand blade shown Application Initial plunge* h b l 1 f 1 f 2 l 3 a r a r1 Seat size 3 3.10/2.17 CFIR 100 03D-R3.10 2.17-JET 1.00 1.00 6 1.04 0.04 1.30.355 1.30 1.54 3 LC..1603 4.00/2.75 100 03D-R4.00 2.75-JET 1.00 1.00 6 1.04 0.04 1.30.355 1.30 1.54 3 LC..1603 5.00/3.50 100 03D-R5.00 3.50-JET 1.00 1.00 6 1.04 0.04 1.30.355 1.30 1.54 3 LC..1603 6.70/4.30 100 03D-R6.70 4.30-JET 1.00 1.00 6 1.04 0.04 1.30.355 1.30 1.54 3 LC..1603 3.10/2.17 CFIL 100 03D-L3.10 2.17-JET 1.00 1.00 6 1.04 0.04 1.30.355 1.30 1.54 3 LC..1603 4.00/2.75 100 03D-L4.00 2.75-JET 1.00 1.00 6 1.04 0.04 1.30.355 1.30 1.54 3 LC..1603 5.00/3.50 100 03D-L5.00 3.50-JET 1.00 1.00 6 1.04 0.04 1.30.355 1.30 1.54 3 LC..1603 6.70/4.30 100 03D-L6.70 4.30-JET 1.00 1.00 6 1.04 0.04 1.30.355 1.30 1.54 3 LC..1603 4 3.10/2.17 CFIR 100 04D-R3.10 2.17-JET 1.00 1.00 6 1.04 0.04 1.42.473 1.42 1.54 4 LC..1604 4.00/2.75 100 04D-R4.00 2.75-JET 1.00 1.00 6 1.04 0.04 1.42.473 1.42 1.54 4 LC..1604 5.00/3.50 100 04D-R5.00 3.50-JET 1.00 1.00 6 1.04 0.04 1.42.473 1.42 1.54 4 LC..1604 6.70/4.30 100 04D-R6.70 4.30-JET 1.00 1.00 6 1.04 0.04 1.42.473 1.42 1.54 4 LC..1604 9.00/5.50 100 04D-R9.00 5.50-JET 1.00 1.00 6 1.04 0.04 1.42.473 1.42 1.54 4 LC..1604 3.10/2.17 CFIL 100 04D-L3.10 2.17-JET 1.00 1.00 6 1.04 0.04 1.42.473 1.42 1.54 4 LC..1604 4.00/2.75 100 04D-L4.00 2.75-JET 1.00 1.00 6 1.04 0.04 1.42.473 1.42 1.54 4 LC..1604 5.00/3.50 100 04D-L5.00 3.50-JET 1.00 1.00 6 1.04 0.04 1.42.473 1.42 1.54 4 LC..1604 6.70/4.30 100 04D-L6.70 4.30-JET 1.00 1.00 6 1.04 0.04 1.42.473 1.42 1.54 4 LC..1604 9.00/5.50 100 04D-L9.00 5.50-JET 1.00 1.00 6 1.04 0.04 1.42.473 1.42 1.54 4 LC..1604 Spare Parts, Parts included in delivery Clamp screw Key *Initial plunge relates to face groove diameter Toolholder/ Insert dimension CF..03.. TCEI0513 4 SMS795 CF..04.. TCEI0613 5 SMS795 Please check availability in current price and stock-list 136

136-144 MDT JetStream Ext.fm Page 137 Thursday, February 11, 2010 12:50 PM Jetstream Tooling, MDT Toolholders, external Toolholders for inserts LCMF, LCMR and LCGN CFIR/L..-Jet Face machining toolholders Inserts, please see pages 157-165 Initial plunge range e.g. 9.0/5.5 inch face groove diameter Right-hand version with right-hand blade shown Application Initial plunge* h b l 1 f 1 f 2 l 3 a r a r1 Seat size 5 3.10/2.17 CFIR 100 05D-R3.10 2.17-JET 1.00 1.00 6 1.04 0.04 1.57.591 1.57 1.54 5 LC..1605 4.00/2.75 100 05D-R4.00 2.75-JET 1.00 1.00 6 1.04 0.04 1.57.591 1.57 1.54 5 LC..1605 5.00/3.50 100 05D-R5.00 3.50-JET 1.00 1.00 6 1.04 0.04 1.57.591 1.57 1.54 5 LC..1605 6.70/4.30 100 05D-R6.70 4.30-JET 1.00 1.00 6 1.04 0.04 1.57.591 1.57 1.54 5 LC..1605 9.00/5.50 100 05D-R9.00 5.50-JET 1.00 1.00 6 1.04 0.04 1.57.591 1.57 1.54 5 LC..1605 3.10-2.17 CFIL 100 05D-L3.10 2.17-JET 1.00 1.00 6 1.04 0.04 1.57.591 1.57 1.54 5 LC..1605 4.00/2.75 100 05D-L4.00 2.75-JET 1.00 1.00 6 1.04 0.04 1.57.591 1.57 1.54 5 LC..1605 5.00/3.50 100 05D-L5.00 3.50-JET 1.00 1.00 6 1.04 0.04 1.57.591 1.57 1.54 5 LC..1605 6.70/4.30 100 05D-L6.70 4.30-JET 1.00 1.00 6 1.04 0.04 1.57.591 1.57 1.54 5 LC..1605 9.00/5.50 100 05D-L90.0 5.50-JET 1.00 1.00 6 1.04 0.04 1.57.591 1.57 1.54 5 LC..1605 6 3.10/2.17 CFIR 100 06D-R3.10 2.17-JET 1.00 1.00 6 1.04 0.04 1.81.709 1.81 1.43 6 LC..1606 4.00/2.75 100 06D-R4.00 2.75-JET 1.00 1.00 6 1.04 0.04 1.81.709 1.81 1.43 6 LC..1606 5.00/3.50 100 06D-R5.00 3.50-JET 1.00 1.00 6 1.04 0.04 1.81.709 1.81 1.43 6 LC..1606 6.70/4.30 100 06D-R6.70 4.30-JET 1.00 1.00 6 1.04 0.04 1.81.709 1.81 1.43 6 LC..1606 9.00/5.50 100 06D-R9.00 5.50-JET 1.00 1.00 6 1.04 0.04 1.81.709 1.81 1.43 6 LC..1606 3.10/2.17 CFIL 100 06D-L3.10 2.17-JET 1.00 1.00 6 1.04 0.04 1.81.709 1.81 1.43 6 LC..1606 4.00/2.75 100 06D-L4.00 2.75-JET 1.00 1.00 6 1.04 0.04 1.81.709 1.81 1.43 6 LC..1606 5.00/3.50 100 06D-L5.00 3.50-JET 1.00 1.00 6 1.04 0.04 1.81.709 1.81 1.43 6 LC..1606 6.70/4.30 100 06D-L6.70 4.30-JET 1.00 1.00 6 1.04 0.04 1.81.709 1.81 1.43 6 LC..1606 9.00/5.50 100 06D-L9.00 5.50-JET 1.00 1.00 6 1.04 0.04 1.81.709 1.81 1.43 6 LC..1606 Spare Parts, Parts included in delivery Clamp screw Key *Initial plunge relates to face groove diameter Toolholder/ Insert dimension CF..05.. TCEI0613 5 SMS795 CF..06.. TCEI0815 6 SMS795 Please check availability in current price and stock-list 137

136-144 MDT JetStream Ext.fm Page 138 Thursday, February 11, 2010 12:50 PM Jetstream Tooling, MDT Toolholders, external Toolholders for inserts LCMF, LCMR and LCGN CFIR/L..-Jet Face machining toolholders Inserts, please see pages 157-159, 161 Initial plunge range e.g. 9.0/5.5 inch face groove diameter Right-hand version with right-hand blade shown Application Initial plunge* h b l 1 f 1 f 2 l 3 a r a r1 Seat size 8 5.00/3.50 CFIR 125 08E-R5.00 3.50-JET 1.25 1.25 7 1.31 0.07 2.20.946 2.20 2.64 8 LC..3008 6.70/4.30 125 08E-R6.70 4.30-JET 1.25 1.25 7 1.31 0.07 2.20.946 2.20 2.64 8 LC..3008 9.00/5.50 125 08E-R9.00 5.50-JET 1.25 1.25 7 1.31 0.07 2.20.946 2.20 2.64 8 LC..3008 19.7/8.00 125 08E-R19.7 8.00-JET 1.25 1.25 7 1.31 0.07 2.20.946 2.20 2.64 8 LC..3008 5.00/3.50 CFIL 125 08E-L5.00 3.50-JET 1.25 1.25 7 1.31 0.07 2.20.946 2.20 2.64 8 LC..3008 6.70/4.30 125 08E-L6.70 4.30-JET 1.25 1.25 7 1.31 0.07 2.20.946 2.20 2.64 8 LC..3008 9.00/5.50 125 08E-L9.00 5.50-JET 1.25 1.25 7 1.31 0.07 2.20.946 2.20 2.64 8 LC..3008 19.7/8.00 125 08E-R19.7 8.00-JET 1.25 1.25 7 1.31 0.07 2.20.946 2.20 2.64 8 LC..3008 Spare Parts, Parts included in delivery Clamp screw Key *Initial plunge relates to face groove diameter Toolholder/ Insert dimension CF..08.. TCEI1020 6 SMS795 Please check availability in current price and stock-list 138

136-144 MDT JetStream Ext.fm Page 139 Thursday, February 11, 2010 12:50 PM Jetstream Tooling, MDT Toolholders, external Toolholders for inserts LCMF, LCMR and LCGN CFOR/L..-Jet Face machining toolholders Inserts, please see pages 157-165 Initial plunge range e.g. 9.0/5.5 inch face groove diameter Right-hand version with left-hand blade shown Application Initial plunge* h b l 1 f 1 l 3 a r Seat size 3 3.10/2.17 CFOR 100 03D-L3.10 2.17-JET 1.00 1.00 6 1.04 1.69 0.71 1.54 3 LC..1603 4.00/2.75 100 03D-L4.00 2.75-JET 1.00 1.00 6 1.04 1.71 0.71 1.54 3 LC..1603 5.00/3.50 100 03D-L5.00 3.50-JET 1.00 1.00 6 1.04 1.71 0.71 1.54 3 LC..1603 6.70/4.30 100 03D-L6.70 4.30-JET 1.00 1.00 6 1.04 1.71 0.71 1.54 3 LC..1603 9.00/5.50 100 03D-L9.00 5.50-JET 1.00 1.00 6 1.04 1.71 0.71 1.54 3 LC..1603 19.7/8.00 100 03D-L19.7 8.00-JET 1.00 1.00 6 1.04 1.71 0.71 1.54 3 LC..1603 3.10/2.17 CFOL 100 03D-R3.10 2.17-JET 1.00 1.00 6 1.04 1.69 0.71 1.54 4 LC..1603 4.00/2.75 100 03D-R4.00 2.75-JET 1.00 1.00 6 1.04 1.71 0.71 1.54 4 LC..1603 5.00/3.50 100 03D-R5.00 3.50-JET 1.00 1.00 6 1.04 1.71 0.71 1.54 3 LC..1603 6.70/4.30 100 03D-R6.70 4.30-JET 1.00 1.00 6 1.04 1.71 0.71 1.54 3 LC..1603 9.00/5.50 100 03D-R9.00 5.50-JET 1.00 1.00 6 1.04 1.71 0.71 1.54 3 LC..1603 19.7/8.00 100 03D-R19.7 8.00-JET 1.00 1.00 6 1.04 1.71 0.71 1.54 3 LC..1603 4 3.10/2.17 CFOR 100 04D-L3.10 2.17-JET 1.00 1.00 6 1.04 2.01 0.95 1.54 4 LC..1604 4.00/2.75 100 04D-L4.00 2.75-JET 1.00 1.00 6 1.04 2.02 0.95 1.43 4 LC..1604 5.00/3.50 100 04D-L5.00 3.50-JET 1.00 1.00 6 1.04 2.02 0.95 1.43 4 LC..1604 6.70/4.30 100 04D-L6.70 4.30-JET 1.00 1.00 6 1.04 2.02 0.95 1.43 4 LC..1604 9.00/5.50 100 04D-L9.00 5.50-JET 1.00 1.00 6 1.04 2.02 0.95 1.43 4 LC..1604 19.7/8.00 100 04D-L19.7 8.00-JET 1.00 1.00 6 1.04 2.02 0.95 1.43 4 LC..1604 3.10/2.17 CFOL 100 04D-R3.10 2.17-JET 1.00 1.00 6 1.04 2.01 0.95 1.43 4 LC..1604 4.00/2.75 100 04D-R4.00 2.75-JET 1.00 1.00 6 1.04 2.02 0.95 1.43 4 LC..1604 5.00/3.50 100 04D-R5.00 3.50-JET 1.00 1.00 6 1.04 2.02 0.95 1.43 4 LC..1604 6.70/4.30 100 04D-R6.70 4.30-JET 1.00 1.00 6 1.04 2.02 0.95 1.43 4 LC..1604 9.00/5.50 100 04D-R9.00 5.50-JET 1.00 1.00 6 1.04 2.02 0.95 1.43 4 LC..1604 19.7/8.00 100 04D-R19.7 8.00-JET 1.00 1.00 6 1.04 2.02 0.95 1.43 4 LC..1604 Spare Parts, Parts included in delivery Clamp screw Key *Initial plunge relates to face groove diameter CFOR Toolholder/ Insert dimension CF..03.. TCEI0513 4 SMS795 CF..04.. TCEI0613 5 SMS795 CFOL Please check availability in current price and stock-list 139

136-144 MDT JetStream Ext.fm Page 140 Thursday, February 11, 2010 12:50 PM Jetstream Tooling, MDT Toolholders, external Toolholders for inserts LCMF, LCMR and LCGN CFOR/L..-Jet Face machining toolholders Inserts, please see pages 157-165 Initial plunge range e.g. 9.0/5.5 inch face groove diameter Right-hand version with left-hand blade shown Application Initial plunge* h b l 1 f 1 l 3 a r Seat size 5 3.10/2.17 CFOR 100 05D-L3.10 2.17-JET 1.00 1.00 6 1.04 2.30 1.18 1.54 5 LC..1605 4.00/2.75 100 05D-L4.00 2.75-JET 1.00 1.00 6 1.04 2.32 1.18 1.41 5 LC..1605 5.00/3.50 100 05D-L5.00 3.50-JET 1.00 1.00 6 1.04 2.32 1.18 1.41 5 LC..1605 6.70/4.30 100 05D-L6.70 4.30-JET 1.00 1.00 6 1.04 2.32 1.18 1.41 5 LC..1605 9.00/5.50 100 05D-L9.00 5.50-JET 1.00 1.00 6 1.04 2.32 1.18 1.41 5 LC..1605 19.7/8.00 100 05D-L19.7 8.00-JET 1.00 1.00 6 1.04 2.32 1.18 1.41 5 LC..1605 3.10/2.17 CFOL 100 05D-R3.10 2.17-JET 1.00 1.00 6 1.04 2.30 1.18 1.54 5 LC..1605 4.00/2.75 100 05D-R4.00 2.75-JET 1.00 1.00 6 1.04 2.32 1.18 1.41 5 LC..1605 5.00/3.50 100 05D-R5.00 3.50-JET 1.00 1.00 6 1.04 2.32 1.18 1.41 5 LC..1605 6.70/4.30 100 05D-R6.70 4.30-JET 1.00 1.00 6 1.04 2.32 1.18 1.41 5 LC..1605 9.00/5.50 100 05D-R9.00 5.50-JET 1.00 1.00 6 1.04 2.32 1.18 1.41 5 LC..1605 19.7/8.00 100 05D-R19.7 8.00-JET 1.00 1.00 6 1.04 2.32 1.18 1.41 5 LC..1605 6 3.10/2.17 CFOR 100 06D-L3.10 2.17-JET 1.00 1.00 6 1.04 2.81 1.42 1.54 6 LC..1606 4.00/2.75 100 06D-L4.00 2.75-JET 1.00 1.00 6 1.04 2.83 1.42 1.36 6 LC..1606 5.00/3.50 100 06D-L5.00 3.50-JET 1.00 1.00 6 1.04 2.83 1.42 1.36 6 LC..1606 6.70/4.30 100 06D-L6.70 4.30-JET 1.00 1.00 6 1.04 2.83 1.42 1.36 6 LC..1606 9.00/5.50 100 06D-L9.00 5.50-JET 1.00 1.00 6 1.04 2.83 1.42 1.36 6 LC..1606 19.7/8.00 100 06D-L19.7 8.00-JET 1.00 1.00 6 1.04 2.83 1.42 1.36 6 LC..1606 3.10/2.17 CFOL 100 06D-R3.10 2.17-JET 1.00 1.00 6 1.04 2.81 1.42 1.54 6 LC..1606 4.00/2.75 100 06D-R4.00 2.75-JET 1.00 1.00 6 1.04 2.83 1.42 1.36 6 LC..1606 5.00/3.50 100 06D-R5.00 3.50-JET 1.00 1.00 6 1.04 2.83 1.42 1.36 6 LC..1606 6.70/4.30 100 06D-R6.70 4.30-JET 1.00 1.00 6 1.04 2.83 1.42 1.36 6 LC..1606 9.00/5.50 100 06D-R9.00 5.50-JET 1.00 1.00 6 1.04 2.83 1.42 1.36 6 LC..1606 19.7/8.00 100 06D-R19.7 8.00-JET 1.00 1.00 6 1.04 2.83 1.42 1.36 6 LC..1606 Spare Parts, Parts included in delivery Clamp screw Key *Initial plunge relates to face groove diameter CFOR Toolholder/ Insert dimension CF..05.. TCEI0613 5 SMS795 CF..06.. TCEI0815 6 SMS795 CFOL Please check availability in current price and stock-list 140

136-144 MDT JetStream Ext.fm Page 141 Thursday, February 11, 2010 12:50 PM Jetstream Tooling, MDT Toolholders, external Toolholders for inserts LCMF, LCMR and LCGN CFOR/L..-Jet Face machining toolholders Inserts, please see pages 157-159, 161 Initial plunge range e.g. 9.0/5.5 inch face groove diameter Right-hand version with left-hand blade shown Application Initial plunge* h b l 1 f 1 l 3 a r Seat size 8 5.00/3.50 CFOR 125 08E-L5.00 3.50-JET 1.25 1.25 7 1.32 3.29 1.89 2.42 8 LC..3008 6.70/4.30 125 08E-L6.70 4.30-JET 1.25 1.25 7 1.32 3.29 1.89 2.42 8 LC..3008 9.00/5.50 125 08E-L9.00 5.50-JET 1.25 1.25 7 1.32 3.29 1.89 2.42 8 LC..3008 19.7/8.00 125 08E-L19.7 8.00-JET 1.25 1.25 7 1.32 3.29 1.89 2.42 8 LC..3008 5.00/3.50 CFOL 125 08E-R5.00 3.50-JET 1.25 1.25 7 1.32 3.29 1.89 2.42 8 LC..3008 6.70/4.30 125 08E-R6.70 4.30-JET 1.25 1.25 7 1.32 3.29 1.89 2.42 8 LC..3008 9.00/5.50 125 08E-R9.00 5.50-JET 1.25 1.25 7 1.32 3.29 1.89 2.42 8 LC..3008 19.7/8.00 125 08E-R19.7 8.00-JET 1.25 1.25 7 1.32 3.29 1.89 2.42 8 LC..3008 Spare Parts, Parts included in delivery Clamp screw Key *Initial plunge relates to face groove diameter CFOR Toolholder/ Insert dimension CF..08.. TCEI1020 6 SMS795 Please check availability in current price and stock-list CFOL 141

136-144 MDT JetStream Ext.fm Page 142 Thursday, February 11, 2010 12:50 PM Jetstream Tooling, MDT Toolholders, external Toolholders for inserts LCMF, LCMR and LCGN CFOR/L..-Jet Face machining toolholders Inserts, please see pages 157-165 Initial plunge range e.g. 9.0/5.5 inch face groove diameter Right-hand version with right-hand blade shown Application Initial plunge* h b l 1 f 1 f 2 l 3 a r a r1 Seat size 3 3.10/2.17 CFOR 100 03D-R3.10 2.17-JET 1.00 1.00 6 1.04 0.04 1.69.709 1.69 1.54 3 LC..1603 4.00/2.75 100 03D-R4.00 2.75-JET 1.00 1.00 6 1.04 0.04 1.71.709 1.71 1.54 3 LC..1603 5.00/3.50 100 03D-R5.00 3.50-JET 1.00 1.00 6 1.04 0.04 1.71.709 1.71 1.54 3 LC..1603 6.70/4.30 100 03D-R6.70 4.30-JET 1.00 1.00 6 1.04 0.04 1.71.709 1.71 1.54 3 LC..1603 9.00/5.50 100 03D-R9.00 5.50-JET 1.00 1.00 6 1.04 0.04 1.71.709 1.71 1.54 3 LC..1603 19.7/8.00 100 03D-R19.7 8.00-JET 1.00 1.00 6 1.04 0.04 1.71.709 1.71 1.54 3 LC..1603 3.10/2.17 CFOL 100 03D-L3.10 2.17-JET 1.00 1.00 6 1.04 0.04 1.69.709 1.69 1.54 3 LC..1603 4.00/2.75 100 03D-L4.00 2.75-JET 1.00 1.00 6 1.04 0.04 1.71.709 1.71 1.54 3 LC..1603 5.00/3.50 100 03D-L5.00 3.50-JET 1.00 1.00 6 1.04 0.04 1.71.709 1.71 1.54 3 LC..1603 6.70/4.30 100 03D-L6.70 4.30-JET 1.00 1.00 6 1.04 0.04 1.71.709 1.71 1.54 3 LC..1603 9.00/5.50 100 03D-L9.00 5.50-JET 1.00 1.00 6 1.04 0.04 1.71.709 1.71 1.54 3 LC..1603 19.7/8.00 100 03D-L19.7 8.00-JET 1.00 1.00 6 1.04 0.04 1.71.709 1.71 1.54 3 LC..1603 4 3.10/2.17 CFOR 100 04D-R3.10 2.17-JET 1.00 1.00 6 1.04 0.04 2.01.946 2.01 1.54 4 LC..1604 4.00/2.75 100 04D-R4.00 2.75-JET 1.00 1.00 6 1.04 0.04 2.02.946 2.02 1.43 4 LC..1604 5.00/3.50 100 04D-R5.00 3.50-JET 1.00 1.00 6 1.04 0.04 2.02.946 2.02 1.43 4 LC..1604 6.70/4.30 100 04D-R6.70 4.30-JET 1.00 1.00 6 1.04 0.04 2.02.946 2.02 1.43 4 LC..1604 9.00/5.50 100 04D-R9.00 5.50-JET 1.00 1.00 6 1.04 0.04 2.02.946 2.02 1.43 4 LC..1604 19.7/8.00 100 04D-R19.7 8.00-JET 1.00 1.00 6 1.04 0.04 2.02.946 2.02 1.43 4 LC..1604 3.10/2.17 CFOL 100 04D-L3.10 2.17-JET 1.00 1.00 6 1.04 0.04 2.01.946 2.01 1.54 4 LC..1604 4.00/2.75 100 04D-L4.00 2.75-JET 1.00 1.00 6 1.04 0.04 2.02.946 2.02 1.43 4 LC..1604 5.00/3.50 100 04D-L5.00 3.50-JET 1.00 1.00 6 1.04 0.04 2.02.946 2.02 1.43 4 LC..1604 6.70/4.30 100 04D-L6.70 4.30-JET 1.00 1.00 6 1.04 0.04 2.02.946 2.02 1.43 4 LC..1604 9.00/5.50 100 04D-L9.00 5.50-JET 1.00 1.00 6 1.04 0.04 2.02.946 2.02 1.43 4 LC..1604 19.7/8.00 100 04D-L19.7 8.00-JET 1.00 1.00 6 1.04 0.04 2.02.946 2.02 1.43 4 LC..1604 Spare Parts, Parts included in delivery Clamp screw Key *Initial plunge relates to face groove diameter CFOL Toolholder/ Insert dimension CF..03.. TCEI0513 4 SMS795 CF..04.. TCEI0613 5 SMS795 CFOR Please check availability in current price and stock-list 142

136-144 MDT JetStream Ext.fm Page 143 Thursday, February 11, 2010 12:50 PM Jetstream Tooling, MDT Toolholders, external Toolholders for inserts LCMF, LCMR and LCGN CFOR/L..-Jet Face machining toolholders Inserts, please see pages 157-165 Initial plunge range e.g. 9.0/5.5 inch face groove diameter Right-hand version with right-hand blade shown Application Initial plunge* h b l 1 f 1 f 2 l 3 a r a r1 Seat size 5 3.10/2.17 CFOR 100 05D-R3.10 2.17-JET 1.00 1.00 6 1.04 0.04 2.30 1.182 2.30 1.54 5 LC..1605 4.00/2.75 100 05D-R4.00 2.75-JET 1.00 1.00 6 1.04 0.04 2.32 1.182 2.32 1.41 5 LC..1605 5.00/3.50 100 05D-R5.00 3.50-JET 1.00 1.00 6 1.04 0.04 2.32 1.182 2.32 1.41 5 LC..1605 6.70/4.30 100 05D-R6.70 4.30-JET 1.00 1.00 6 1.04 0.04 2.32 1.182 2.32 1.41 5 LC..1605 9.00/5.50 100 05D-R9.00 5.50-JET 1.00 1.00 6 1.04 0.04 2.32 1.182 2.32 1.41 5 LC..1605 19.7/8.00 100 05D-R19.7 8.00-JET 1.00 1.00 6 1.04 0.04 2.32 1.182 2.32 1.41 5 LC..1605 3.10/2.17 CFOL 100 05D-L3.10 2.17-JET 1.00 1.00 6 1.04 0.04 2.30 1.182 2.30 1.54 5 LC..1605 4.00/2.75 100 05D-L4.00 2.75-JET 1.00 1.00 6 1.04 0.04 2.32 1.182 2.32 1.41 5 LC..1605 5.00/3.50 100 05D-L5.00 3.50-JET 1.00 1.00 6 1.04 0.04 2.32 1.182 2.32 1.41 5 LC..1605 6.70/4.30 100 05D-L6.70 4.30-JET 1.00 1.00 6 1.04 0.04 2.32 1.182 2.32 1.41 5 LC..1605 9.00/5.50 100 05D-L9.00 5.50-JET 1.00 1.00 6 1.04 0.04 2.32 1.182 2.32 1.41 5 LC..1605 19.7/8.00 100 05D-L19.7 8.00-JET 1.00 1.00 6 1.04 0.04 2.32 1.182 2.32 1.41 5 LC..1605 6 3.10/2.17 CFOR 100 06D-R3.10 2.17-JET 1.00 1.00 6 1.04 0.04 2.81 1.418 2.81 1.54 6 LC..1606 4.00/2.75 100 06D-R4.00 2.75-JET 1.00 1.00 6 1.04 0.04 2.83 1.418 2.83 1.36 6 LC..1606 5.00/3.50 100 06D-R5.00 3.50-JET 1.00 1.00 6 1.04 0.04 2.83 1.418 2.83 1.36 6 LC..1606 6.70/4.30 100 06D-R6.70 4.30-JET 1.00 1.00 6 1.04 0.04 2.83 1.418 2.83 1.36 6 LC..1606 9.00/5.50 100 06D-R9.00 5.50-JET 1.00 1.00 6 1.04 0.04 2.83 1.418 2.83 1.36 6 LC..1606 19.7/8.00 100 06D-R19.7 8.00-JET 1.00 1.00 6 1.04 0.04 2.83 1.418 2.83 1.36 6 LC..1606 3.10/2.17 CFOL 100 06D-L3.10 2.17-JET 1.00 1.00 6 1.04 0.04 2.81 1.418 2.81 1.54 6 LC..1606 4.00/2.75 100 06D-L4.00 2.75-JET 1.00 1.00 6 1.04 0.04 2.83 1.418 2.83 1.36 6 LC..1606 5.00/3.50 100 06D-L5.00 3.50-JET 1.00 1.00 6 1.04 0.04 2.83 1.418 2.83 1.36 6 LC..1606 6.70/4.30 100 06D-L6.70 4.30-JET 1.00 1.00 6 1.04 0.04 2.83 1.418 2.83 1.36 6 LC..1606 9.00/5.50 100 06D-L9.00 5.50-JET 1.00 1.00 6 1.04 0.04 2.83 1.418 2.83 1.36 6 LC..1606 19.7/8.00 100 06D-L19.7 8.00-JET 1.00 1.00 6 1.04 0.04 2.83 1.418 2.83 1.36 6 LC..1606 Spare Parts, Parts included in delivery Clamp screw Key *Initial plunge relates to face groove diameter CFOL Toolholder/ Insert dimension CF..05.. TCEI0613 5 SMS795 CF..06.. TCEI0815 6 SMS795 CFOR Please check availability in current price and stock-list 143

136-144 MDT JetStream Ext.fm Page 144 Thursday, February 11, 2010 12:50 PM Jetstream Tooling, MDT Toolholders, external Toolholders for inserts LCMF, LCMR and LCGN CFOR/L..-Jet Face machining toolholders Inserts, please see pages 157-159, 161 Initial plunge range e.g. 9.0/5.5 inch face groove diameter Right-hand version with right-hand blade shown Application Initial plunge* h b l 1 f 1 f 2 l 3 a r a r1 Seat size 8 5.00/3.50 CFOR 125 08E-R5.00 3.50-JET 1.25 1.25 7 1.32 0.07 3.29 1.891 3.29 2.42 8 LC..3008 6.70/4.30 125 08E-R6.70 4.30-JET 1.25 1.25 7 1.32 0.07 3.29 1.891 3.29 2.42 8 LC..3008 9.00/5.50 125 08E-R9.00 5.50-JET 1.25 1.25 7 1.32 0.07 3.29 1.891 3.29 2.42 8 LC..3008 19.7/8.00 125 08E-R19.7 8.00-JET 1.25 1.25 7 1.32 0.07 3.29 1.891 3.29 2.42 8 LC..3008 5.00/3.50 CFOL 125 08E-L5.00 3.50-JET 1.25 1.25 7 1.32 0.07 3.29 1.891 3.29 2.42 8 LC..3008 6.70/4.30 125 08E-L6.70 4.30-JET 1.25 1.25 7 1.32 0.07 3.29 1.891 3.29 2.42 8 LC..3008 9.00/5.50 125 08E-L9.00 5.50-JET 1.25 1.25 7 1.32 0.07 3.29 1.891 3.29 2.42 8 LC..3008 19.7/8.00 125 08E-L19.7 8.00-JET 1.25 1.25 7 1.32 0.07 3.29 1.891 3.29 2.42 8 LC..3008 Spare Parts, Parts included in delivery Clamp screw Key *Initial plunge relates to face groove diameter CFOL Toolholder/ Insert dimension CF..08.. TCEI1020 6 SMS795 CFOR Please check availability in current price and stock-list 144

145-146 MDT Mod Ext Holders.fm Page 145 Friday, February 12, 2010 10:31 AM MDT - Holders, external for modular holders Toolholders GR/L FR/L Blades, please see pages 148-152 How to assemble, see pages 132-133 Right-hand version shown Application 0 90 h b l 1 f 1 l 3 GR063B-V21.63.63 4.5.63.630 0.44 GL063B-V21.63.63 4.5.63.630 0.44 GR075B-V21.75.75 4.5.75.630 0.88 GL075B-V21.75.75 4.5.75.630 0.88 GR100D-V21 1.00 1.00 6.00 1.00.630 1.76 GL100D-V21 1.00 1.00 6.00 1.00.630 1.76 GR125D-V21 1.25 1.25 6.00 1.25.630 2.43 GL125D-V21 1.25 1.25 6.00 1.25.630 2.43 FR063B-V21.63.63 4.5.67 1.33 0.44 FL063B-V21.63.63 4.5.67 1.33 0.44 FR075B-V21.75.75 4.5.80 1.33 0.88 FL075B-V21.75.75 4.5.80 1.33 0.88 FR100D-V21 1.00 1.00 6.00 1.05 1.33 1.54 FL100D-V21 1.00 1.00 6.00 1.05 1.33 1.54 FR125D-V21 1.25 1.25 6.00 1.60 1.33 2.43 FL125D-V21 1.25 1.25 6.00 1.60 1.33 2.43 Spare Parts, Parts included in delivery Locking screw Screw Key Toolholder/ Insert dimension..-v21 C46017-T20P F85015-T20P T20P-7L Please check availability in current price and stock-list 145

145-146 MDT Mod Ext Holders.fm Page 146 Friday, February 12, 2010 10:31 AM MDT - Holders, external for modular holders Toolholders SR/L Blades, please see pages 148-152 How to assemble, see pages 132-133 Right-hand version shown Application 45 h b l 1 f s1 l 3 SR075B-V21 0.75 0.75 4.5 1.65 1.68 0.75 SL075B-V21 0.75 0.75 4.5 1.65 1.68 0.75 SR100D-V21 1.00 1.00 4.5 1.97 1.93 1.65 SL100D-V21 1.00 1.00 4.5 1.97 1.93 1.65 SR125D-V21 1.25 1.25 4.5 2.35 2.18 2.49 SL125D-V21 1.25 1.25 4.5 2.35 2.18 2.49 Spare Parts, Parts included in delivery Locking screw Screw Key Toolholder/ Insert dimension..-v21 C46017-T20P F85015-T20P T20P-7L Please check availability in current price and stock-list 146

147 MDT Mod Int Bars.fm Page 147 Friday, February 12, 2010 10:34 AM MDT - Holders, internal for modular holders Toolholders FR/L Blades, please see pages 148-152 How to assemble, see pages 132-133 Right-hand version shown Application dm m l 1 l 3 f 1 A16-FR-V21 1.00 8 1.81.170 1.32 A16-FL-V21 1.00 8 1.81.170 1.32 A20-FR-V21 1.25 10 1.77.294 2.87 A20-FL-V21 1.25 10 1.77.294 2.87 A24-FR-V21 1.50 12 1.77.420 5.29 A24-FL-V21 1.50 12 1.77.420 5.29 Locking screw Screw Key Coolant adaptor* Toolholder/ Insert dimension A16- C46017-T20P F85015-T20P T20P-7L SEAL25 A20- C46017-T20P F85015-T20P T20P-7L SEAL32 A24- C46017-T20P F85015-T20P T20P-7L SEAL40 Please check availability in current price and stock-list 147

148-152 MDT Mod Blades.fm Page 148 Friday, February 12, 2010 10:49 AM MDT - Blades, modular Blades C.R/L Holders, please see pages 145-146 How to assemble, see pages 132-133 Inserts, please see pages 153-165 Right-hand version shown Application l 1 f 1 a r 3 V21-CIR 1303 0.355 0.362 0.316 0.18 LC..1303.. V21-CIL 1303 0.355 0.362 0.316 0.18 LC..1303.. V21-CMR 1303 0.591 0.362 0.552 0.18 LC..1303.. V21-CML 1303 0.591 0.362 0.552 0.18 LC..1303.. 4 V21-CIR 1304 0.473 0.362 0.434 0.18 LC..1304.. V21-CIL 1304 0.473 0.362 0.434 0.18 LC..1304.. V21-CMR 1304 0.788 0.362 0.749 0.20 LC..1304.. V21-CML 1304 0.788 0.362 0.749 0.20 LC..1304.. 3 V21-CML 1603 0.591 0.362 0.552 0.18 LC..1603.. V21-CMR 1603 0.591 0.362 0.552 0.18 LC..1603.. 4 V21-CMR 1604 0.788 0.362 0.749 0.20 LC..1604.. V21-CML 1604 0.788 0.362 0.749 0.20 LC..1604.. 5 V21-CIR 1605 0.591 0.362 0.552 0.20 LC..1605.. V21-CIL 1605 0.591 0.362 0.552 0.20 LC..1605.. V21-CMR 1605 0.985 0.362 0.946 0.20 LC..1605.. V21-CML 1605 0.985 0.362 0.946 0.20 LC..1605.. 6 V21-CIR 1606 0.709 0.362 0.670 0.20 LC..1606.. V21-CIL 1606 0.709 0.362 0.670 0.20 LC..1606.. V21-CMR 1606 1.182 0.362 1.143 0.22 LC..1606.. V21-CML 1606 1.182 0.362 1.143 0.22 LC..1606.. Please check availability in current price and stock-list 148

148-152 MDT Mod Blades.fm Page 149 Friday, February 12, 2010 10:49 AM MDT - Blades, modular Blades C.R/L Face machining blades Holders, please see pages 145-147 How to assemble, see pages 132-133 Inserts, please see pages 153-156 Initial plunge range e.g. 1.18-.670 (1.18 inch/.670 inch) Right-hand version with left-hand blade shown Application Initial plunge* Inch Metric l 1 f 1 a r 3 1.18/.670 V21-CJR 1303L1.18-.670 1303L030017.413.362.374.09 LC..1303.. 1.54/.950 1303L1.54-.950 1303L039024.413.362.374.11 LC..1303.. 1.97/1.30 V21-CKR 1303L1.97-1.30 1303L050033.472.362.433.13 LC..1303.. 2.36/1.70 1303L2.36-1.70 1303L060043.472.362.433.13 LC..1303.. 3.00/2.09 1303L3.00-2.09 1303L076053.472.362.433.15 LC..1303.. 1.18/.670 V21-CJL 1303R1.18-.670 1303R030017.413.362.374.09 LC..1303.. 1.54/.950 1303R1.54-.950 1303R039024.413.362.374.11 LC..1303.. 1.97/1.30 V21-CKL 1303R1.97-1.30 1303R050033.472.362.433.13 LC..1303.. 2.36/1.70 1303R2.36-1.70 1303R060043.472.362.433.13 LC..1303.. 3.00/2.09 1303R3.00-2.09 1303R076053.472.362.433.15 LC..1303.. 4 1.18/.670 V21-CHR 1304L1.18-.670 1304L030017.413.362.374.09 LC..1304.. 1.34/.826 1304L1.34-.826 1304L034021.413.362.374.11 LC..1304.. 1.57/1.02 V21-CIR 1304L1.57-1.02 1304L040026.472.362.433.13 LC..1304.. 1.97/1.26 1304L1.97-1.26 1304L050032.472.362.433.13 LC..1304.. 2.36/1.65 1304L2.36-1.65 1304L060042.472.362.433.13 LC..1304.. 2.96/2.05 1304L2.96-2.05 1304L075052.472.362.433.15 LC..1304.. 3.94/2.64 1304L3.94-2.64 1304L100067.472.362.433.18 LC..1304.. 1.18/.670 V21-CHL 1304R1.18-.670 1304R030017.413.362.374.09 LC..1304.. 1.34/.826 1304R1.34-.826 1304R030421.413.362.374.11 LC..1304.. 1.57/1.02 V21-CIL 1304R1.57-1.02 1304R040026.472.362.433.13 LC..1304.. 1.97/1.26 1304R1.97-1.26 1304R050032.472.362.433.13 LC..1304.. 2.36/1.65 1304R2.36-1.65 1304R060042.472.362.433.13 LC..1304.. 2.96/2.05 1304R2.96-2.05 1304R075052.472.362.433.15 LC..1304.. 3.94/2.64 1304R3.94-2.64 1304R100067.472.362.433.18 LC..1304.. Please check availability in current price and stock-list 149

148-152 MDT Mod Blades.fm Page 150 Friday, February 12, 2010 10:49 AM MDT - Blades, modular Blades C.R/L Face machining blades Holders, please see pages 145-147 How to assemble, see pages 132-133 Inserts, please see pages 153-156 Initial plunge range e.g. 1.18-.670 (1.18 inch/.670 inch) Right-hand version with left-hand blade shown Application Initial plunge* Inch Metric l 1 f 1 a r 3 1.18/0.67 V21-COR 1303L1.18-.670 1303L030017.709.362.669 0.11 LC..1303.. 1.53/0.94 1303L1.53-.940 1303L039024.709.362.669 0.11 LC..1303.. 1.97/1.30 1303L1.97-1.30 1303L050033.709.362.669 0.13 LC..1303.. 2.36/1.69 1303L2.36-1.69 1303L060043.709.362.669 0.15 LC..1303.. 3.00/2.09 1303L3.00-2.09 1303L076053.709.362.669 0.18 LC..1303.. 3.94/2.75 1303L3.94-2.75 1303L100070.709.362.669 0.20 LC..1303.. 5.35/3.70 1303L5.35-3.70 1303L136094.709.362.669 0.20 LC..1303.. 7.87/5.12 1303L7.87-5.12 1303L200130.709.362.669 0.20 LC..1303.. 1.18/0.67 V21-COL 1303R1.18-.670 1303R030017.709.362.669 0.11 LC..1303.. 1.53/0.94 1303R1.53-0.94 1303R039024.709.362.669 0.11 LC..1303.. 1.97/1.30 1303R1.97-1.30 1303R050033.709.362.669 0.13 LC..1303.. 2.36/1.69 1303R2.36-1.69 1303R060043.709.362.669 0.15 LC..1303.. 3.00/2.09 1303R3.00-2.09 1303R076053.709.362.669 0.18 LC..1303.. 3.94/2.75 1303R3.94-2.75 1303R100070.709.362.669 0.20 LC..1303.. 5.35/3.70 1303R5.35-3.70 1303R136094.709.362.669 0.20 LC..1303.. 7.87/5.12 1303R7.87-5.12 1303R200130.709.362.669 0.20 LC..1303.. 4 1.18/0.67 V21-CMR 1304L1.18-.670 1304L030017.787.362.748 0.11 LC..1304 1.34/0.83 1304L1.34-.826 1304L034021.787.362.748 0.13 LC..1304 1.57/1.02 1304L1.57-1.02 1304L040026.787.362.748 0.15 LC..1304 1.97/1.26 1304L1.97-1.26 1304L050032.787.362.748 0.15 LC..1304 2.36/1.65 1304L2.36-1.65 1304L060042.787.362.748 0.18 LC..1304 2.95/2.05 1304L2.96-2.05 1304L075052.787.362.748 0.20 LC..1304 3.94/2.64 1304L3.94-2.64 1304L100067.787.362.748 0.22 LC..1304 5.32/3.62 1304L5.31-3.62 1304L135092.787.362.748 0.22 LC..1304 7.87/5.00 1304L7.87-5.00 1304L200127.787.362.748 0.22 LC..1304 1.18/0.67 V21-CML 1304R1.18-.670 1304R030017.787.362.748 0.11 LC..1304 1.34/0.83 1304R1.34-.826 1304R034021.787.362.748 0.13 LC..1304 1.57/1.02 1304R1.57-1.02 1304R040026.787.362.748 0.15 LC..1304 1.97/1.26 1304R1.97-1.26 1304R050032.787.362.748 0.15 LC..1304 2.36/1.65 1304R2.36-1.65 1304R060042.787.362.748 0.18 LC..1304 2.95/2.05 1304R2.96-2.05 1304R075052.787.362.748 0.20 LC..1304 3.94/2.64 1304R3.94-2.64 1304R100067.787.362.748 0.22 LC..1304 5.32/3.62 1304R5.31-3.62 1304R135092.787.362.748 0.22 LC..1304 7.87/5.00 1304R7.87-5.00 1304R200127.787.362.748 0.22 LC..1304 Please check availability in current price and stock-list 150

148-152 MDT Mod Blades.fm Page 151 Friday, February 12, 2010 10:49 AM MDT - Blades, modular Blades C.R/L Face machining blades Holders, please see pages 145-147 How to assemble, see pages 132-133 Inserts, please see pages 153-156 Initial plunge range e.g. 1.18-.670 (1.18 inch/.670 inch) Right-hand version with right-hand blade shown Application Initial plunge* Metric l 1 f 1 a r 3 1.18/.670 V21-CJR 1303R1.18-.670 1303R030017.413.362.374.09 LC..1303.. 1.54/.950 1303R1.54-.950 1303R039024.413.362.374.11 LC..1303.. 1.97/1.30 V21-CKR 1303R1.97-1.30 1303R050033.472.362.433.13 LC..1303.. 2.36/1.70 1303R2.36-1.70 1303R060043.472.362.433.13 LC..1303.. 3.00/2.09 1303R3.00-2.09 1303R076053.472.362.433.15 LC..1303.. 1.18/.670 V21-CJL 1303L1.18-.670 1303L030017.413.362.374.09 LC..1303.. 1.54/.950 1303L1.54-.950 1303L039024.413.362.374.11 LC..1303.. 1.97/1.30 V21-CKL 1303L1.97-1.30 1303L050033.472.362.433.13 LC..1303.. 2.36/1.70 1303L2.36-1.70 1303L060043.472.362.433.13 LC..1303.. 3.00/2.09 1303L3.00-2.09 1303L076053.472.362.433.15 LC..1303.. 4 1.18/.670 V21-CHR 1304R1.18-.670 1304R030017.413.362.374.09 LC..1304.. 1.34/.826 1304R1.34-.826 1304R034021.413.362.374.11 LC..1304.. 1.57/1.02 V21-CIR 1304R1.57-1.02 1304R040026.472.362.433.13 LC..1304.. 1.97/1.26 1304R1.97-1.26 1304R050032.472.362.433.13 LC..1304.. 2.36/1.65 1304R2.36-1.65 1304R060042.472.362.433.13 LC..1304.. 2.96/2.05 1304R2.96-2.05 1304R075052.472.362.433.15 LC..1304.. 3.94/2.64 1304R3.94-2.64 1304L100067.472.362.433.18 LC..1304.. 1.18/.670 V21-CHL 1304L1.18-.670 1304L030017.413.362.374.09 LC..1304.. 1.34/.826 1304L1.34-.826 1304L034021.413.362.374.11 LC..1304.. 1.57/1.02 V21-CIL 1304L1.57-1.02 1304L040026.472.362.433.13 LC..1304.. 1.97/1.26 1304L1.97-1.26 1304L050032.472.362.433.13 LC..1304.. 2.36/1.65 1304L2.36-1.65 1304L060042.472.362.433.13 LC..1304.. 2.96/2.05 1304L2.96-2.05 1304L075052.472.362.433.15 LC..1304.. 3.94/2.64 1304L3.94-2.64 1304L100067.472.362.433.18 LC..1304.. Please check availability in current price and stock-list 151

148-152 MDT Mod Blades.fm Page 152 Friday, February 12, 2010 10:49 AM MDT - Blades, modular Blades C.R/L Face machining blades Holders, please see pages 145-147 How to assemble, see pages 132-133 Inserts, please see pages 153-156 Initial plunge range e.g. 1.18-.670 (1.18 inch/.670 inch) Right-hand version with right-hand blade shown Application Initial plunge* Metric l 1 f 1 a r 3 1.18/0.67 V21-COR 1303R1.18-.670 1303R030017.709.362.669 0.11 LC..1303.. 1.53/0.94 1303R1.53-.940 1303R039024.709.362.669 0.11 LC..1303.. 1.97/1.30 1303R1.97-1.30 1303R050033.709.362.669 0.13 LC..1303.. 2.36/1.69 1303R2.36-1.69 1303R060043.709.362.669 0.15 LC..1303.. 3.00/2.09 1303R3.00-2.09 1303R076053.709.362.669 0.18 LC..1303.. 3.94/2.75 1303R3.94-2.75 1303R100070.709.362.669 0.20 LC..1303.. 5.35/3.70 1303R5.35-3.70 1303R136094.709.362.669 0.20 LC..1303.. 7.87/5.12 1303R7.87-5.12 1303R200130.709.362.669 0.20 LC..1303.. 1.18/0.67 V21-COL 1303L1.18-.670 1303L030017.709.362.669 0.11 LC..1303.. 1.53/0.94 1303L1.53-.940 1303L039024.709.362.669 0.11 LC..1303.. 1.97/1.30 1303L1.97-1.30 1303L050033.709.362.669 0.13 LC..1303.. 2.36/1.69 1303L2.36-1.69 1303L060043.709.362.669 0.15 LC..1303.. 3.00/2.09 1303L3.00-2.09 1303L076053.709.362.669 0.18 LC..1303.. 3.94/2.75 1303L3.94-2.75 1303L100070.709.362.669 0.20 LC..1303.. 5.35/3.70 1303L5.35-3.70 1303L136094.709.362.669 0.20 LC..1303.. 7.87/5.12 1303L7.87-5.12 1303L200130.709.362.669 0.20 LC..1303.. 4 1.18/0.67 V21-CMR 1304R1.18-.670 1304R030017.787.362.748 0.11 LC..1304 1.34/0.83 1304R1.34-.826 1304R034021.787.362.748 0.13 LC..1304 1.57/1.02 1304R1.57-1.02 1304R040026.787.362.748 0.15 LC..1304 1.97/1.26 1304R1.97-1.26 1304R050032.787.362.748 0.15 LC..1304 2.36/1.65 1304R2.36-1.65 1304R060042.787.362.748 0.18 LC..1304 2.95/2.05 1304R2.96-2.05 1304R075052.787.362.748 0.20 LC..1304 3.94/2.64 1304R3.94-2.64 1304R100067.787.362.748 0.22 LC..1304 5.32/3.62 1304R5.31-3.62 1304R135092.787.362.748 0.22 LC..1304 7.87/5.00 1304R7.87-5.00 1304R200127.787.362.748 0.22 LC..1304 1.18/0.67 V21-CML 1304L1.18-.670 1304L030017.787.362.748 0.11 LC..1304 1.34/0.83 1304L1.34-.826 1304L034021.787.362.748 0.13 LC..1304 1.57/1.02 1304L1.57-1.02 1304L040026.787.362.748 0.15 LC..1304 1.97/1.26 1304L1.97-1.26 1304L050032.787.362.748 0.15 LC..1304 2.36/1.65 1304L2.36-1.65 1304L060042.787.362.748 0.18 LC..1304 2.95/2.05 1304L2.96-2.05 1304L075052.787.362.748 0.20 LC..1304 3.94/2.64 1304L3.94-2.64 1304L100067.787.362.748 0.22 LC..1304 5.32/3.62 1304L5.31-3.62 1304L135092.787.362.748 0.22 LC..1304 7.87/5.00 1304L7.87-5.00 1304L200127.787.362.748 0.22 LC..1304 Please check availability in current price and stock-list 152

153-165 MDT Inserts.fm Page 153 Friday, February 12, 2010 8:34 AM MDT - Inserts LCMF and LCMR Tolerances: a p = ±.002 l = ±.003 s = ±.002 l = Distance cutting edge-rear support Size a p (mm) l s rε 1303..-FT.118 (3).486.157.008-.016 1303..-MP.118 (3).486.157.059 1304..-FT.157 (4).486.157.008-.016 1304..-MP.157 (4).486.157.079 Grades Coated Inserts LCMF-FT TP200 CP500 CP600 TGP25 LCMF 130302-0300-FT [ 130304-0300-FT [ [ [ LCMF 130402-0400-FT [ 130404-0400-FT [ [ [ LCMF-MP LCMF 1303M0-0300-MP [ [ [ LCMF 1304M0-0400-MP [ [ [ LCMR-FT LCMR 130304-0300-FT [ LCMR 130404-0400-FT [ LCMR-MP LCMR 1303M0-0300-MP [ LCMR 1304M0-0400-MP [ [ Stock standard Subject to change refer to current price and stock-list 153

153-165 MDT Inserts.fm Page 154 Friday, February 12, 2010 8:34 AM MDT - Inserts LCMF Tolerances: a p = ±.002 l = ±.003 s = ±.002 l = Distance cutting edge-rear support Size a p (mm) l s rε 1303.118 (3).486.157.016 1304.157 (4).486.157.016 Grades Coated Inserts LCMF-MC TP200 CP500 CP600 TGP25 LCMF 130304-0300-MC [ [ [ LCMF 130404-0400-MC [ [ [ [ Stock standard Subject to change refer to current price and stock-list 154

153-165 MDT Inserts.fm Page 155 Friday, February 12, 2010 8:34 AM MDT - Inserts LCGF Tolerances: a p = ±.001 l = ±.001 s = ±.002 l = Distance cutting edge-rear support Size a p (mm) l s rε 1303.118 (3).486.157.008 1304.157 (4).486.157.008 Coated Grades Uncoated Inserts LCGF-GG TP200 CP200 CP500 TK150 LCGF 130302-0300-GG [ TGP25 883 890 LCGF 130402-0400-GG [ LCGF-GS LCGF 130302-0300-GS [ LCGF 130402-0400-GS [ [ Stock standard Subject to change refer to current price and stock-list 155

153-165 MDT Inserts.fm Page 156 Friday, February 12, 2010 8:34 AM MDT - Inserts LCGA Size a p l s rε a r -0115.045.486.157.055-0135.053.486.157.063-0165.065.486.157.004.075-0190.075.486.157.004.085-0215.085.486.157.006.094-0265.104.486.157.008.114-0300.118.486.157.008-0400.157.486.157.008 Inserts Standard For lock-ring Note LCGA-FG DIN 471 DIN 472 SMS 1581 SMS 1582 CP500 1,0 mm LCGA 130300-0115-FG * [ 1,2 mm 130300-0135-FG * [ 1,5 mm 130301-0165-FG * [ 1,75 mm 130301-0190-FG * [ 2,0 mm 130301-0215-FG * [ 2,5 mm 130302-0265-FG [ 130302-0300-FG [ LCGA 130402-0400-FG [ Grades Coated [ Stock standard *Note! Toolholders have to be modified Subject to change refer to current price and stock-list 156

153-165 MDT Inserts.fm Page 157 Friday, February 12, 2010 8:34 AM MDT - Inserts LCMF and LCMR Tolerances: a p = ±.002 l = ±.003 s = ±.0015 l = Distance cutting edge-rear support Size a p (mm) l s rε mm-version 1603.118 (3).630.177.008-.016 1604.157 (4).630.177.008-.031 1605.197 (5).630.177.016-.031 1606.236 (6).630.177.016-.039 3008-08.315 (8) 1.150.219.016-.047 3008-10.393 (10) 1.150.219.031-.047 inch-version 1603.125.630.177.008 1605.187.630.177.020 1606.250.630.177.020 Coated Grades Uncoated Inserts LCMF-FT TP200 CP200 CP500 TK150 TGP25 LCMF 160302-0300-FT [ [ [ [ 160304-0300-FT [ [ [ [ LCMF 160402-0400-FT [ [ 160404-0400-FT [ [ [ [ 160408-0400-FT [ [ [ LCMF 160504-0500-FT [ [ [ [ 160508-0500-FT [ [ [ 883 890 LCMF 160604-0600-FT [ [ [ 160608-0600-FT [ [ [ [ [ 160610-0600-FT [ [ [ LCMF 300804-0800-FT [ [ [ [ 300808-0800-FT [ [ [ [ [ 300808-1000-FT [ [ [ 300812-0800-FT [ [ [ [ 300812-1000-FT [ LCMF-MT inch-version LCMF 160302-A125-FT [ 160505-A187-FT [ [ 160605-A250-FT [ [ [ LCMF 160302-0300-MT [ [ [ 160304-0300-MT [ [ [ [ [ LCMF 160404-0400-MT [ [ [ [ 160408-0400-MT [ [ [ [ [ LCMF 160504-0500-MT [ [ [ [ 160508-0500-MT [ [ [ [ LCMF 160604-0600-MT [ [ [ 160608-0600-MT [ [ [ [ [ 160610-0600-MT [ [ [ inch-version LCMF 160302-A125-MT [ [ 160505-A187-MT [ [ 160605-A250-MT [ [ [ Stock standard Subject to change refer to current price and stock-list 157

153-165 MDT Inserts.fm Page 158 Friday, February 12, 2010 8:34 AM MDT - Inserts LCMF and LCMR Coated Grades Uncoated Inserts LCMF-MG LCMR-FT LCMR-MT TP200 CP200 CP500 TK150 TGP25 LCMF 160304-0300-MG [ [ [ LCMF 160404-0400-MG [ [ [ LCMF 160504-0500-MG [ [ [ LCMF 160608-0600-MG [ [ [ LCMR 160304-0300-FT [ [ [ [ LCMR 160402-0400-FT [ [ 160404-0400-FT [ [ [ [ LCMR 160504-0500-FT [ [ [ [ LCMR 160608-0600-FT [ [ [ [ 883 LCMR 300808-0800-FT [ [ [ [ 300808-1000-FT [ 300812-0800-FT [ [ 300812-1000-FT [ LCMR 160304-0300-MT [ [ [ [ LCMR 160404-0400-MT [ [ [ 160408-0400-MT [ LCMR 160504-0500-MT [ [ [ 160508-0500-MT [ LCMR 160608-0600-MT [ [ [ 160610-0600-MT [ 890 [ Stock standard Subject to change refer to current price and stock-list 158

153-165 MDT Inserts.fm Page 159 Friday, February 12, 2010 8:34 AM MDT - Inserts LCMF and LCMR Tolerances: a p = ±.002 l = ±.003 s = ±.0015 l = Distance cutting edge-rear support Size a p (mm) l s rε mm-version 1603M0.118 (3).674.177.059 1604M0.157 (4).679.177.079 1605M0.197 (5).699.177.098 1606M0.236 (6).714.177.118 3008M0-08.315 (8) 1.183.216.157 3008M0-10.393 (10) 1.183.216.197 inch-version 160300.125.683.177.063 160500.187.722.177.094 160600.250.719.177.125 Coated Grades Uncoated Inserts LCMF-MP TP200 CP200 CP500 TK150 TGP25 883 890 LCMF 1603M0-0300-MP [ [ [ [ [ [ LCMF 1604M0-0400-MP [ [ [ [ [ [ LCMF 1605M0-0500-MP [ [ [ [ [ [ LCMF 1606M0-0600-MP [ [ [ [ [ [ LCMF 3008M0-0800-MP [ [ [ [ [ 3008M0-1000-MP [ [ [ inch-version 160300-A125-MP [ [ [ [ LCMF 160500-A187-MP [ [ [ [ LCMR-MP LCMF 160600-A250-MP [ [ [ [ LCMR 1603M0-0300-MP [ [ [ [ [ LCMR 1604M0-0400-MP [ [ [ [ [ LCMR 1605M0-0500-MP [ [ [ [ [ LCMR 1606M0-0600-MP [ [ [ [ [ LCMR 3008M0-0800-MP [ [ [ [ 3008M0-1000-MP [ [ [ [ Stock standard Subject to change refer to current price and stock-list 159

153-165 MDT Inserts.fm Page 160 Friday, February 12, 2010 8:34 AM MDT - Inserts LCMF and LCMR Tolerances: a p = ±.002 l = ±.003 s = ±.0015 l = Distance cutting edge-rear support Size a p (mm) l s rε 1603.118 (3).630.177.008-.016 1604.157 (4).630.177.008-.016 1605.197 (5).630.177.016 1606.236 (6).630.177.016-.032 Grades Coated Inserts Lead Angle (κ) LCMF-MC LCMF 160302-0300-MC [ [ 160304-0300-MC [ [ [ [ 160302-0300-MCR6 6 [ [ 160302-0300-MCL6 6 [ [ 160302-0300-MCR15 15 [ 160302-0300-MCL15 15 [ LCMF 160402-0400-MC [ [ 160402-0400-MCR6 6 [ [ 160402-0400-MCL6 6 [ 160402-0400-MCR15 15 [ 160402-0400-MCL15 15 [ 160404-0400-MC [ [ [ [ LCMF 160504-0500-MC [ [ [ [ TP200 CP500 CP600 TGP25 LCMR-MC LCMF 160604-0600-MC [ [ [ [ 160608-0600-MC [ [ [ LCMR 160302-0300-MC [ LCMR 160404-0400-MC [ LCMR 160504-0500-MC [ LCMR 160604-0600-MC [ [ Stock standard Subject to change refer to current price and stock-list 160

153-165 MDT Inserts.fm Page 161 Friday, February 12, 2010 8:34 AM MDT - Inserts LCGF Tolerances: a p = ±.001 l = ±.001 s = ±.002 l = Distance cutting edge-rear support Size a p (mm) l s rε 1603.118 (3).630.177.008 1604.157 (4).630.177.008 1605.197 (5).630.177.008 1606.236 (6).630.177.016 3008.315 (8) 1.150.219.016 Coated Grades Uncoated Inserts LCGF-GG TP200 CP200 CP500 TK150 LCGF 160302-0300-GG [ TGP25 883 890 LCGF 160402-0400-GG [ LCGF 160502-0500-GG [ LCGF 160604-0600-GG [ LCGF-GS LCGF 300804-0800-GG [ LCGF 160302-0300-GS [ LCGF 160402-0400-GS [ LCGF 160502-0500-GS [ LCGF 160604-0600-GS [ LCGF 300804-0800-GS [ [ Stock standard Subject to change refer to current price and stock-list 161

153-165 MDT Inserts.fm Page 162 Friday, February 12, 2010 8:34 AM MDT - Inserts LCG.-FG - Radial grooves Size a p l s rε a r 0115.045.630.177.045 0135.053.630.177.053 0165.065.630.177.004.065 0190.075.630.177.004.075 0215.085.630.177.006.085 0265.104.630.177.008 0300.118.630.177.008 0320.126.630.177.008 0340.134.630.177.008 0400.157.630.177.008 0420.165.630.177.008 0440.173.630.177.008 0500.197.674.177.008 0520.205.674.177.008 0600.236.693.177.008 0635.250.693.177.008 A031.031.630.177.004.050 A063.063.630.177.008.125 A094.094.630.177.008.180 Inserts Standard For lock-ring Note LCGN-FG LCGF-FG DIN 471 DIN 472 SMS 1581 SMS 1582 CP500 1.0 mm LCGN 160300-0115-FG * [ 1.2 mm 160300-0135-FG * [ 1.5 mm 160301-0165-FG * [ 1.75 mm 160301-0190-FG * [ 2.0 mm 160301-0215-FG * [ 2.5 mm 160302-0265-FG [ 160302-0300-FG [ 3.0 mm 160302-0320-FG [ 160302-0340-FG [ 160402-0400-FG [ 4.0 mm 160402-0420-FG [ 160402-0440-FG [ 160502-0500-FG [ 5.0 mm 160502-0520-FG [ 160602-0600-FG [ 160602-0635-FG [ LCGF 160301-0300-FG [ Grades Coated LCGN-FG LCGN 160301-A031RH-FG * [ 160301-A031LH-FG * [ 160302-A063RH-FG * [ 160302-A063LH-FG * [ 160302-A094RH-FG * [ 160302-A094LH-FG * [ Right hand shown [ Stock standard *Note! Toolholders have to be modified Subject to change refer to current price and stock-list 162

153-165 MDT Inserts.fm Page 163 Friday, February 12, 2010 8:34 AM MDT - Inserts LCGN - O-ring Size a p l s t rε r a r 0240-DY.130.654.177.090.009.010.079 0300-DY.161.654.177.090.039.010.098 0180-DY.094.654.177.070.019.010.061 0265-DY.142.654.177.090.016.012.090 0160-ST.094.654.177.070.020.010.047 0240-ST.126.654.177.070.020.010.075 0300-ST.150.654.177.090.039.012.094 0355-ST.189.673.177.112.029.012.110 Grades Coated Inserts LCGN-DY O-ring, dynamic LCGN-ST Standard SMS 1588 BS 4518 ISO 3601 DIN 3771 BS 1806 SMS 1588 BS 4518 For O-ring mm For O-ring inch CP500 2.4.094 LCGN 160405-0240-DY [ 3.0.118 160410-0300-DY [ 1.8.070 LCGN 160305-0180-DY [ 2.6.103 160405-0265-DY [ 1.6.063 LCGN 160305-0160-ST [ 2.4.094 160305-0240-ST [ 3.0.118 160410-0300-ST [ O-ring, static ISO 3601 DIN 3771 BS 1806 3.5.139 LCGN 160507-0355-ST [ [ Stock standard Subject to change refer to current price and stock-list 163

153-165 MDT Inserts.fm Page 164 Friday, February 12, 2010 8:34 AM MDT - Inserts LCGN - Full radius grooving Size l s rε a a 0100.654.177.039.094 0120.654.177.047.094 0150.654.177.059 0200.654.177.079 0300.693.177.118 Inserts For radius inch (mm) LCGN-R CP500.039 (1.0 mm) LCGN 1603M0-0100R-R* [.039 (1.0 mm) 1603M0-0100L-R* [.047 (1.2 mm) 1603M0-0120R-R* [.047 (1.2 mm) 1603M0-0120L-R* [.059 (1.5 mm) 1603M0-0150-R [.079 (2.0 mm) LCGN 1604M0-0200-R [.118 (3.0 mm) LCGN 1606M0-0300-R [ Grades Coated *Note! Toolholders have to be modified. LCGN - DIN 76 Right-hand version shown Size t l s rε 0100.086.654.177.024 0150.126.673.177.030 0200.181.693.177.039 Inserts For Max T.P.I. (mm) LCGN-D76 CP500 24 (1.0 ) LCGN 160306-0100R-D76* [ 24 (1.0 ) 160306-0100L-D76* [ 16 (1.5) LCGN 160507-0150R-D76 [ 16 (1.5) 160507-0150L-D76 [ 12 (2.0) LCGN 160610-0200R-D76 [ 12 (2.0) 160610-0200L-D76 [ Grades Coated [ Stock standard *Note! Toolholders have to be modified Subject to change refer to current price and stock-list 164

153-165 MDT Inserts.fm Page 165 Friday, February 12, 2010 8:34 AM MDT - Inserts LCGN - Partial profile 55 Size l s rε 1603-A.654.177.003 1603-G.654.177.007 Tolerances: l = ±.001 re = ±.001 Grades Coated Inserts TPI Pitch mm LCGN...-.55 CP500 48-16 0.5-1.5 LCGN 1603-A55* [ 14-8 1.75-3.0 LCGN 1603-G55* [ LCGN - Partial profile 60 Size *Note! Toolholders have to be modified. l s rε 1603-A.654.177.003 1603-G.654.177.007 Tolerances: l = ±.001 re = ±.001 Grades Coated Inserts TPI Pitch mm LCGN...-.60 CP500 48-16 0.5-1.5 LCGN 1603-A60* [ 14-8 1.75-3.0 LCGN 1603-G60* [ [ Stock standard *Note! Toolholders have to be modified Subject to change refer to current price and stock-list 165

Threading Toolholders HD Threading Clamp System Larger/Stronger Clamp Screw Carbide pin = no pocket deformation Heavy duty clamp = total insert secutity (anti-twist) Toolholder Modifications to Thread Small IDs It is often necessary to cut internal threads which are too small to be made with a standard toolholder. Several standard internal toolholders can be modified by a simple reworking so that threads can be cut in approximately 30% smaller bores. This modification work can be made on any lathe with a four jaw chuck. In the dimension table Internal Threading (selection Toolholders and Spare parts) you will find the dimensions required for the alteration. On request, these internal toolholders can also be supplied as a special design. For some holders it is possible to work inside smaller bores than indicated by the D mod dimension, here it is necessary to back off the bottom corner of the insert (possible also the anvil). f 1 and l 3 dimensions can be found in the internal threading data charts. C = f 1 - l 3 + r - D mod C = Centerpoint displacement when modifying the tool. D = Minimum bore diameter of standard tool. D mod = Minimum bore diameter with a modified tool. 166 166 HD Min Mod 3.indd 166 2/12/2010 7:44:28 AM

167-171 Threading Int AHD.fm Page 167 Thursday, February 11, 2010 2:37 PM Threading - Toolholders, internal Toolholders for S- inserts SNR...09A SNR/L Snap Tap Inserts, see Machining Navigator Turning Right-hand version shown Application Insert I.C. Min. Hole Dia. Min. Hole Dia. Mod.* dm m l 1 l 3 f 1 7/32 SNR 000750 55-09A.40.40.750 5.5.750.200.25 09NR 1/4 SNR 000375 40-11.50.45.375 4.0.285.22 11NR 00050 55-11.60.50.500 5.5 1.25.315.25 11NR SNL 000375 40-11.50.45.375 4.0.285.22 11NL 00050 55-11.60.50.500 5.5 1.25.315.25 11NL 3/8 SNR 000625 60-16.75.62.625 6.0 1.50.406.44 16NR SNL 000625 60-16.75.62.625 6.0 1.50.406.44 16NL 1/2 SNR 00075 70-22.90.85.750 7.0 2.00.492.66 22NR SNL 00075 70-22.90.85.750 7.0 2.00.492.66 22NL 1/4 Heavy metal shank SNR 000375 60-11-H.45.40.375 6.0.285.40 11NR 3/8 SNR 000625 80-16-H.75.62.625 8.0 1.50.406.80 16NR 1/2 SNR 000750 10-22-H.90.85.750 10.0 2.00.492 1.32 22NR Spare Parts, Parts included in delivery Locking screw/ Key Coolant adaptor* *Holder can be modified to accommodate smaller bore size, see page 166. Toolholder/ Insert dimension...09a C02205-T07P T07P-2 SEAL20 (20 mm)...11 C02506-T07P T07P-2...16 C03508-T15P T15P-2...22 C04011-T15P T15P-2 Please check availability in current price and stock-list *To be ordered separately 167

167-171 Threading Int AHD.fm Page 168 Thursday, February 11, 2010 2:37 PM Threading - Toolholders, internal Toolholders for S- inserts CNR/L Snap Tap Inserts, see Machining Navigator Turning Right-hand version shown Application Insert I.C. Min. Hole Dia. Min. Hole Dia. Mod.* dm m l 1 l 3 f 1 3/8 CNR 00075 7-16AHD 0.95 0.8 0.75 7 0.52 0.66 16NR 00100 8-16AHD 1.15 1.0 1.00 8 0.65 1.54 16NR 00125 10-16AHD 1.40 1.2 1.25 10 0.78 3.00 16NR 00150 12-16AHD 1.70 1.5 1.50 12 0.90 5.94 16NR 00175 14-16AHD 2.00 1.8 1.75 14 1.03 7.88 16NR 00200 14-16AHD 2.20 2.0 2.00 14 1.15 10.78 16NR CNL 00075 7-16AHD 0.95 0.8 0.75 7 0.52 0.66 16NL 00100 8-16AHD 1.15 1.0 1.00 8 0.65 1.54 16NL 00125 10-16AHD 1.40 1.2 1.25 10 0.78 3.00 16NL 00150 12-16AHD 1.70 1.5 1.50 12 0.90 5.94 16NL 00175 14-16AHD 2.00 1.8 1.75 14 1.03 7.88 16NL 00200 14-16AHD 2.20 2.0 2.00 14 1.15 10.78 16NL Spare Parts, Parts included in delivery Anvil for insert type S Anvil for insert type M* *Holder can be modified to accommodate smaller bore size, see page 166. Anvil screw/ Key* Clamp Clamp screw Spring Key Toolholder/ Insert dimension 00075/0100...16AHD GX 16-1 MX 16-1 3S3507-T09P T09P-2 CSP16HD-T15P T15P-2 00125/00150..16AHD GX 16-1 MX 16-1 3S3507-T09P T09P-2 CHD16 L85020-T15P S6912 T15P-2 00175/00200..16AHD GX 16-1 MX 16-1 3S3507-T09P T09P-2 CHD16 L85020-T15P S6912 T15P-2 Please check availability in current price and stock-list *To be ordered separately 168

167-171 Threading Int AHD.fm Page 169 Thursday, February 11, 2010 2:37 PM Threading - Toolholders, internal Toolholders for S- inserts CNR/L Snap Tap Inserts, see Machining Navigator Turning Right-hand version shown Application Insert I.C. Min. Hole Dia. Min. Hole Dia. Mod.* dm m l 1 l 3 f 1 1/2 CNR 00100 8-22AHD 1.20 1.10 1.00 8.710 1.54 22NR 00125 10-22AHD 1.50 1.20 1.25 10.840 3.08 22NR 00150 12-22AHD 1.80 1.50 1.50 12.970 5.94 22NR 00175 14-22AHD 2.10 1.80 1.75 14 1.09 7.88 22NR 00200 14-22AHD 2.30 2.00 2.00 14 1.21 10.78 22NR 00250 16-22AHD 2.80 2.50 2.50 16 1.46 19.58 22NR CNL 00100 8-22AHD 1.20 1.10 1.00 8.710 1.54 22NL 00125 10-22AHD 1.50 1.20 1.25 10.840 3.08 22NL 00150 12-22AHD 1.80 1.50 1.50 12.970 5.94 22NL 00175 14-22AHD 2.10 1.80 1.75 14 1.09 7.88 22NL 00200 14-22AHD 2.30 2.00 2.00 14 1.21 10.78 22NL 00250 16-22AHD 2.80 2.50 2.50 16 1.46 19.58 22NL 5/8 CNR 00150 12-27AHD 1.90 1.50 1.50 12 1.02 5.94 27NR 00175 14-27AHD 2.20 1.80 1.75 14 1.15 7.88 27NR 00250 16-27AHD 2.90 2.50 2.50 16 1.52 19.58 27NR CNL 00150 12-27AHD 1.90 1.50 1.50 12 1.02 5.94 27NL 00175 14-27AHD 2.20 1.80 1.75 14 1.15 7.88 27NL 00250 16-27AHD 2.90 2.50 2.50 16 1.52 19.58 27NL Spare Parts, Parts included in delivery Anvil for insert type S Anvil for insert type M* *Holder can be modified to accommodate smaller bore size, see page 166. Anvil screw/ Key* Clamp Clamp screw Spring Key Toolholder/ Insert dimension 00100...22AHD NX 22-1 MX 22-1 3S4009-T15P T15P-2 CSP22HD-T15P T15P-2 00125/00150..22AHD NX 22-1 MX 22-1 3S4009-T15P T15P-2 CHD22 L86025-T20P S7616 T20P-7L 00175/00200..22AHD NX 22-1 MX 22-1 3S4009-T15P T15P-2 CHD22 L86025-T20P S7616 T20P-7L 00250..22AHD NX 22-1 MX 22-1 3S4009-T15P T15P-2 CHD22 L86025-T20P S7616 T20P-7L..27AHD VX 27-1 MX 27-1 C05012-T15P T15P-2 CHD27 L86025-T20P S7616 T20P-7L Please check availability in current price and stock-list *To be ordered separately 169

167-171 Threading Int AHD.fm Page 170 Thursday, February 11, 2010 2:37 PM Threading - Toolholders, internal Toolholders for API S-inserts CNR...APIHD Snap Tap Inserts, see Machining Navigator Turning Right-hand version shown Application Insert I.C. Min. Hole Dia. Min. Hole Dia. Mod. dm m l 1 l 3 f 1 1/2 CNR 00200 T22APIHD 1.60 2.000 12 5.00.880 10.78 22NR 00250 T22APIHD 1.60 2.500 12 5.00.880 10.78 22NR CNL 00200 T22APIHD 1.60 2.000 12 5.00.880 10.78 22NL 00250 T22APIHD 1.60 2.500 12 5.00.880 10.78 22NL 5/8 CNR 00200 T27APIHD 1.60 2.000 12 5.00.900 19.58 27NR 00250 T27APIHD 1.60 2.500 12 5.00.900 19.58 27NR CNL 00200 T27APIHD 1.60 2.000 12 5.00.900 19.58 27NL 00250 T27APIHD 1.60 2.500 12 5.00.900 19.58 27NL Spare Parts, Parts included in delivery Anvil for insert type S Anvil screw/ Key* Clamp Clamp screw Spring Key Toolholder/ Insert dimension...22qhd NX 22-1 CS4009-T15P T15P-2 CHD22 L86025-T20P S7616 T20P-7L...27QHD VX27-1 C05012-T15P T15P-2 CHD27 L86025-T20P S7616 T20P-7L Please check availability in current price and stock-list *To be ordered separately 170

167-171 Threading Int AHD.fm Page 171 Thursday, February 11, 2010 2:37 PM Threading - Toolholders, internal Toolholders for K-inserts CNR/L Snap Tap Inserts, see Machining Navigator Turning Right-hand version shown Application Insert I.C. Min. Hole Dia. Min. Hole Dia. Mod.* dm m l 1 l 3 f 1 1/2 CNR 00100 8-20AHD 1.40 1.40 1.000 8.0 -.810 2.20 20.. 00125 10-20AHD 1.70 1.40 1.250 10.0.940 3.08 20.. 00150 12-20AHD 2.00 1.60 1.500 12.0 1.06 5.50 20.. CNL 00100 8-20AHD 1.40 1.40 1.000 8.0.810 2.20 20.. 00125 10-20AHD 1.70 1.40 1.250 10.0.940 3.08 20.. 5/8 CNR 00125 10-26AHD 2.00 1.60 1.250 10.0 1.06 3.08 26.. 00150 12-26AHD 2.10 1.60 1.500 12.0 1.18 5.50 26.. 00175 14-26AHD 2.30 1.80 1.750 14.0 1.31 8.74 26.. 00200 14-26AHD 2.50 2.00 2.000 14.0 1.43 10.78 26.. 00250 16-26AHD 3.00 2.50 2.500 16.0 1.68 19.58 26.. CNL 00125 10-26AHD 2.00 1.60 1.250 10.0 1.06 3.08 26.. 00150 12-26AHD 2.10 1.60 1.500 12.0 1.18 5.50 26.. 00175 14-26AHD 2.30 1.80 1.750 14.0 1.31 8.74 26.. Spare Parts, Parts included in delivery Anvil for insert type K *Holder can be modified to accommodate smaller bore size, see page 166. Anvil screw/ Key* Clamp Clamp screw Spring Key Toolholder/ Insert dimension...20ahd KX 20-2 CS4009-T15P T15P-2 CHD22 L86025-T20P S7616 T20P-7L...26AHD KX 26-2 C05012-T15P T15P-2 CHD27 L86025-T20P S7616 T20P-7L Please check availability in current price and stock-list *To be ordered separately 171

Milling 172 172 Milling Beauty.indd 172 2/12/2010 7:45:43 AM

173 Double Octo Normal.fm Page 173 Thursday, February 11, 2010 2:46 PM Face milling cutters Double Octomill 220.48-09S For insert selection and cutting data recommendations, see page 175. For complete insert program, see page 176. Tool angles: γ o = -11 γ p = - 8 γ f = -8 Pitch Normal R220.48-02.50-09-05S 2.48 3.07 1.57.236 5 1.32 4900 ONMU 09-03.00-09-06S 3.15 3.74 1.97.236 6 2.43 4400 ONMU 09-04.00-09-07S 3.94 4.53 1.97.236 7 3.97 3900 ONMU 09-05.00-09-08S 4.92 5.51 2.48.236 8 6.61 3500 ONMU 09-06.00-09-10S 6.30 6.89 2.48.236 10 9.70 3100 ONMU 09-808.00-09-12S 7.87 8.46 2.48.236 12 13.67 2700 ONMU 09-810.00-09-16S** 9.84 10.43 2.48.236 16 29.76 2500 ONMU 09-812.50-09-20S** 12.40 12.99 3.15.236 20 61.29 2200 ONMU 09 **Non stocked standard *Max. a p.157-.236" depending upon insert geometry, see page 175. Spare parts Locking screw Dimensions in Inch D c D c2 l 1 a p * Max. Key For cutter R220.48 C05013-T20P T20P-4 Mounting dimensions Locking screw torque value 53 in/lbs. Dynamomentic keys are available, see page 261. For cutter dm m B kw c d hc1 d hc2 R220.48-02.50 0.75 0.32 0.19 R220.48-03.00 1.00 0.38 0.22 R220.48-04.00 1.50 0.63 0.38 R220.48-05.00 1.50 0.63 0.38 R220.48-06.00 2.00 0.76 0.44 R220.48-808.00 2.50 1.01 0.56 4.00 R220.48-810.00 2.50 1.01 0.56 4.00 R220.48-812.50 2.50 1.01 0.56 4.00 7.00 Please check availability in current price and stock-list. 173

174 Double Octo Close.fm Page 174 Thursday, February 11, 2010 2:48 PM Face milling cutters Double Octomill 220.48-09M For insert selection and cutting data recommendations, see page 175. For complete insert program, see page 176. Tool angles: γ o = -11 γ p = - 8 γ f = -8 Dimensions in Inch Pitch Close D c D c2 l 1 a p * Max. R220.48-03.00-09-09M 3.15 3.74 1.97.236 9 2.43 4400 ONMU 09-04.00-09-12M 3.94 4.53 1.97.236 12 3.97 3900 ONMU 09-05.00-09-15M 4.92 5.51 2.48.236 15 6.61 3500 ONMU 09-06.00-09-20M 6.30 6.89 2.48.236 20 9.70 3100 ONMU 09-808.00-09-24M** 7.87 8.46 2.48.236 24 13.67 2700 ONMU 09-810.00-09-30M** 9.84 10.43 2.48.236 30 29.76 2500 ONMU 09-812.50-09-40M** 12.40 12.99 3.15.236 40 61.29 2200 ONMU 09 **Non stocked standard *Max. a p.157-.236" depending upon insert geometry, see page 175. Spare parts Wedge Wedge screw Key For cutter R220.48 CW0816 LD8025-T25P T25P-4 Mounting dimensions Wedge screw torque value 53-70 in/lbs. Dynamomentic keys are available, see page 261. For cutter dm m B kw c d hc1 d hc2 R220.48-03.00 1.00 0.38 0.22 R220.48-04.00 1.50 0.63 0.38 R220.48-05.00 1.50 0.63 0.38 R220.48-06.00 2.00 0.76 0.44 R220.48-808.00 2.50 1.01 0.56 4.00 R220.48-810.00 2.50 1.01 0.56 4.00 R220.48-812.50 2.50 1.01 0.56 4.00 7.00 Please check availability in current price and stock-list. 174

175 Double Octo Data.fm Page 175 Thursday, February 11, 2010 2:50 PM Face milling cutters Insert selection Double Octomill 220.48-09 Seco Material Group No. Cutting data Recom. feed f z in/tooth First choice Difficult operations 1.006.014 ONMU 090520ANTN-M13 MP2500 ONMU 090520ANTN-M14 T350M 2.006.014 ONMU 090520ANTN-M13 MP2500 ONMU 090520ANTN-M14 T350M 3.006.014 ONMU 090520ANTN-M14 MP2500 ONMU 090520ANTN-M14 T350M 4.006.014 ONMU 090520ANTN-M14 MP2500 ONMU 090520ANTN-M14 T350M 5.004.012 ONMU 090520ANTN-M14 MP2500 ONMU 090520ANTN-M14 T350M 6.004.008 ONMU 090520ANTN-M14 MP1500 ONMU 090520ANTN-MD16 MP1500 7.004.006 ONMU 090520ANTN-M14 MP1500 ONMU 090520ANTN-MD16 MP3000 8.006.012 ONMU 090520ANTN-M13 MP2500 ONMU 090520ANTN-M14 T350M 9.006.012 ONMU 090520ANTN-M13 MP2500 ONMU 090520ANTN-M14 T350M 10.006.010 ONMU 090520ANTN-M14 T350M ONMU 090520ANTN-MD16 T350M 11.006.008 ONMU 090520ANTN-MD16 T350M ONMU 090520ANTN-MD16 T350M 12.006.014 ONMU 090520ANTN-M14 MK1500 ONMU 090520ANTN-M14 MK3000 13.006.014 ONMU 090520ANTN-M14 MK1500 ONMU 090520ANTN-M14 MK3000 14.004.012 ONMU 090520ANTN-MD16 MK1500 ONMU 090520ANTN-MD16 MK3000 15.004.010 ONMU 090520ANTN-MD16 MP1500 ONMU 090520ANTN-MD16 MK3000 16.004.010 ONMU 090520ANTN-M13 F40M ONMU 090520ANTN-M13 F40M 17.004.010 ONMU 090520ANTN-M13 F40M ONMU 090520ANTN-M13 F40M 20 21 22 Seco Material Group No. Grades Universal insert: ONMU 090520ANTN-M14 MP2500 MP1500 MP2500 MP3000/MK2000 T350M F40M MK1500 MK3000 Feed, f z (in/tooth).006.010.014.006.010.014.006.010.014.006.010.014.006.010.014.006.010.014.006.010.014 Cutting speed, v c (sf/min) 1 1280 1100 970 1130 970 855 1085 920 820 985 835 755 855 740 655 1050 885 785 2 1115 950 855 1000 855 755 935 805 705 870 740 655 755 640 575 920 770 690 3 935 805 705 835 705 625 785 675 590 720 605 540 625 540 475 755 640 575 4 855 720 640 755 640 575 720 605 540 655 560 490 575 490 425 690 590 525 5 690 590 525 625 525 460 590 490 445 540 460 410 460 395 360 560 475 425 6 510 425 375 445 375 345 425 360 330 395 330 295 345 295 260 410 345 310 7 165 130 130 115 130 115 130 100 115 100 130 115 8 835 705 625 655 560 490 640 560 490 605 525 460 560 475 425 640 560 490 9 720 605 540 575 490 425 560 475 425 525 460 410 490 410 360 560 475 425 10 605 525 460 490 410 360 475 410 360 460 395 345 410 345 310 475 410 360 11 475 410 375 330 375 310 360 295 330 280 375 310 12 755 640 575 655 560 510 625 540 475 575 490 445 510 425 375 935 805 705 605 525 460 13 675 575 510 590 510 445 560 475 425 510 445 395 445 375 345 835 720 640 540 460 410 14 605 525 460 540 460 410 510 445 395 475 410 360 410 345 310 770 655 590 490 425 375 15 490 425 445 375 410 360 375 330 330 280 625 525 410 345 16 3480 2955 2625 3085 2625 2330 2920 2475 2215 2675 2280 2035 2330 1985 1770 2820 2410 2135 17 2805 2395 2135 2495 2115 1885 2360 2000 1790 2165 1835 1640 1885 1610 1425 2280 1935 1720 20 21 22 Surface finish Type of insert Feed/ rev < = R a µin Insert geometry Max D.O.C. a p Wiper flat width B M13.082 31 M13.157.082 M14.018 40 M14.236.018 M15.082 31 M15.157.082 MD16.018 40 MD16.236.018 MD17.082 31 MD17.157.082 Finish of the milled surface is determined by feed/rev used. 175

176 ONMU Inserts.fm Page 176 Thursday, February 11, 2010 2:51 PM Milling Inserts ONMU 09 Tolerances (± inch) l s ONMU.002.002 Size l s ONMU 09.866.228 Prot. Chamfer Coated Grades Uncoated Inserts M13 Cutting rake Width inch Angle MH1000 MK1500 MK2000 MK3000 MP1500 MP2500 MP3000 T150M T200M T25M T250M T350M F15M F17M F20M F25M F30M F40M S60M HX H15 H25 ONMU 090520ANTN-M13 20 [ [ [ [ [ [ [ [ ONMU 090520ANTN-M14 15 [ [ [ [ [ [ [ [ M14/M15 ONMU 090520ANTN-M15 15 [ [ [ [ [ [ [ [ ONMU 090520ANTN-MD16 0 [ [ [ [ [ [ ONMU 090520ANTN-MD17 0 [ [ [ [ [ [ MD16/MD17 [ Stock standard Subject to change refer to current price and stock-list 176

177 Sq 6 Combi.fm Page 177 Thursday, February 11, 2010 2:53 PM Square shoulder and slot milling cutters Square 6 R217.96-08A Cylindrical/Weldon Combimaster For insert selection and cutting data recommendations, see pages 178-179. For complete insert program, see page 181. For plunging, see page 180. Tool angles: γ o = -15 γ p = -8.4 γ f = -15.2 Dimensions in Inch D c dm m D 5m l 1 l 2 l p l 3 l c M a p Type of mounting R217.96-01.50-3-08-3A 1.50 1.25 4.5 1.15 3.35.295 3 1.32 Cyl/Weldon 11800 XNEX 0806.. R217.96-1.50-16RE-08-3A 1.50 1.10 1.57 16.295 3 0.50 Combimaster 11800 XNEX 0806.. Spare parts, included in delivery. Locking screw Key* *For Combimaster shanks and dimensions, see MN Milling book 2, pages 94-107. For cutter R217.96-1.50.. C04011-T15P T15P-4 Please check availability in current price and stock-list. *Key torque value 31 in/lbs. Dynamomentic keys are available, see page 261. 177

178 Sq 6 Data 001.fm Page 178 Thursday, February 11, 2010 2:55 PM Square shoulder and slot milling cutters Insert selection 217/220.96-08 Seco Material Group No. Recom. feed f z in/tooth First choice Difficult operations 1.004.010 XNEX 080608TR-ME09 F40M XNEX 080608TR-ME09 T350M 2.004.010 XNEX 080608TR-ME09 F40M XNEX 080608TR-ME09 T350M 3.004.009 XNEX 080608TR-M13 MP2500 XNEX 080608TR-M13 T350M 4.004.008 XNEX 080608TR-M13 MP2500 XNEX 080608TR-M13 T350M 5.004.007 XNEX 080608TR-M13 MP2500 XNEX 080608TR-M13 T350M 6.004.007 XNEX 080608TR-MD15 MP1500 XNEX 080608TR-MD15 MP2500 7.003.006 XNEX 080608TR-MD15 MP1500 XNEX 080608TR-MD15 MP3000 8.004.008 XNEX 080608TR-ME09 F40M XNEX 080608TR-M13 T350M 9.004.007 XNEX 080608TR-ME09 F40M XNEX 080608TR-M13 T350M 10.004.007 XNEX 080608TR-ME09 F40M XNEX 080608TR-M13 F40M 11.004.006 XNEX 080608TR-ME09 F40M XNEX 080608TR-M13 F40M 12.004.012 XNEX 080608TR-M13 MK1500 XNEX 080608TR-MD15 MK2000 13.004.010 XNEX 080608TR-M13 MK1500 XNEX 080608TR-MD15 MK2000 14.004.008 XNEX 080608TR-M13 MK1500 XNEX 080608TR-MD15 MK2000 15.004.007 XNEX 080608TR-M13 MP1500 XNEX 080608TR-MD15 MP1500 16.004.008 XNEX 080608TR-ME09 F40M XNEX 080608TR-ME09 F40M 17.004.007 XNEX 080608TR-ME09 F40M XNEX 080608TR-ME09 F40M 20.003.005 XNEX 080608TR-ME09 T350M XNEX 080608TR-ME09 F40M 21.003.003 XNEX 080608TR-ME09 F40M XNEX 080608TR-ME09 MP3000 22.003.005 XNEX 080608TR-ME09 F40M XNEX 080608TR-ME09 F40M Cutting data - Full engagement width (a e /D c = 100%) Seco Material Group No. Grades MP1500 MP2500 MP3000 T350M F40M Feed, f z (in/tooth).003.007.012.003.007.012.003.007.012.003.007.012.003.007.012 Cutting speed, v c (sf/min) 1 1560 1200 1015 1380 1065 900 1295 1000 855 1200 935 785 1050 805 675 2 1360 1050 885 1200 935 785 1130 885 740 1050 805 690 920 705 590 3 1130 870 740 1000 770 655 950 740 625 870 675 575 755 590 490 4 1035 805 675 920 705 590 870 675 575 805 625 525 690 540 460 5 835 655 540 740 575 490 705 540 460 655 510 425 560 445 360 6 605 475 540 425 510 395 475 360 410 310 7 195 150 165 115 150 115 150 115 130 100 8 1000 770 655 785 605 525 785 605 510 740 575 475 675 525 445 9 870 675 690 540 675 525 640 490 590 460 10 740 575 590 460 575 445 540 425 490 395 11 575 445 460 360 460 345 425 330 395 295 12 900 705 590 805 625 525 755 590 490 705 540 460 605 475 395 13 805 625 525 720 560 475 675 525 445 625 475 410 540 425 360 14 740 575 490 655 510 425 625 475 410 575 445 375 490 395 330 15 605 460 525 410 510 395 460 360 410 310 16 3725 2885 2430 3525 2740 2295 3250 2510 2115 2820 2180 1835 17 3000 2330 1970 2855 2200 1855 2625 2035 1705 2280 1770 1495 20 215 165 195 165 195 150 180 130 21 130 100 130 100 115 100 115 80 22 215 165 195 165 195 150 180 130 Universal insert: XNEX 080608-M13 MP2500 Cutting data - Side milling Operations a e /D c feed f z in/tooth Recommended Speed factor Full engagement 100%.003.007.012 1.00 080608.295.051 Side milling 25%.004.009.016 1.30 080612.295.041 10%.006.015.024 1.50 080616.295.020 5%.008.020.034 1.60 Average chip thickness h m.002.004.007 Choose suitable feed. Multiply speed value from basic cutting data by speed factor. Insert size l Max D.O.C. a p Wiper flat width B 178

179 Sq 6 Data 002.fm Page 179 Thursday, February 11, 2010 2:57 PM Square shoulder and slot milling cutters Insert selection 217/220.96-08 Seco Material Group No. Recom. feed f z in/tooth First choice Difficult operations 1.004.010 XNEX 080608TR-ME09 F40M XNEX 080608TR-ME09 T350M 2.004.010 XNEX 080608TR-ME09 F40M XNEX 080608TR-ME09 T350M 3.004.009 XNEX 080608TR-M13 MP2500 XNEX 080608TR-M13 T350M 4.004.008 XNEX 080608TR-M13 MP2500 XNEX 080608TR-M13 T350M 5.004.007 XNEX 080608TR-M13 MP2500 XNEX 080608TR-M13 T350M 6.004.007 XNEX 080608TR-MD15 MP1500 XNEX 080608TR-MD15 MP2500 7.003.006 XNEX 080608TR-MD15 MP1500 XNEX 080608TR-MD15 MP3000 8.004.008 XNEX 080608TR-ME09 F40M XNEX 080608TR-M13 T350M 9.004.007 XNEX 080608TR-ME09 F40M XNEX 080608TR-M13 T350M 10.004.007 XNEX 080608TR-ME09 F40M XNEX 080608TR-M13 F40M 11.004.006 XNEX 080608TR-ME09 F40M XNEX 080608TR-M13 F40M 12.004.012 XNEX 080608TR-M13 MK1500 XNEX 080608TR-MD15 MK2000 13.004.010 XNEX 080608TR-M13 MK1500 XNEX 080608TR-MD15 MK2000 14.004.008 XNEX 080608TR-M13 MK1500 XNEX 080608TR-MD15 MK2000 15.004.007 XNEX 080608TR-M13 MP1500 XNEX 080608TR-MD15 MP1500 16.004.008 XNEX 080608TR-ME09 F40M XNEX 080608TR-ME09 F40M 17.004.007 XNEX 080608TR-ME09 F40M XNEX 080608TR-ME09 F40M 20.003.005 XNEX 080608TR-ME09 T350M XNEX 080608TR-ME09 F40M 21.003.003 XNEX 080608TR-ME09 F40M XNEX 080608TR-ME09 MP3000 22.003.005 XNEX 080608TR-ME09 F40M XNEX 080608TR-ME09 F40M Cutting data - Full engagement width (a e /D c = 100%) Seco Material Group No. MK1500 MK2000 MK3000.003.007.012.003.007.012.003.007.012 1 1360 1050 885 1265 950 820 2 1180 920 770 1100 820 720 3 985 770 640 920 690 605 4 900 705 590 835 625 540 5 740 575 475 690 510 445 6 540 410 490 375 7 165 130 165 115 8 870 675 575 785 590 510 9 755 590 675 510 10 655 510 575 425 11 510 395 460 345 12 1130 885 740 785 605 510 740 560 475 13 1015 785 655 705 540 460 655 490 425 14 935 720 605 655 510 425 605 460 395 15 755 590 525 410 490 360 16 3675 2840 2395 3410 2560 2230 17 2970 2295 1935 2755 2065 1805 20 230 180 195 150 21 150 115 130 100 22 230 180 195 150 Grades Feed, f z (in/tooth) Cutting speed, v c (sf/min) Universal insert: XNEX 080608-M13 MP2500 Cutting data - Side milling Operations a e /D c feed f z in/tooth Recommended Speed factor Full engagement 100%.003.007.012 1.00 080608.295.051 Side milling 25%.004.009.016 1.30 080612.295.041 10%.006.015.024 1.50 080616.295.020 5%.008.020.034 1.60 Average chip thickness h m.002.004.007 Choose suitable feed. Multiply speed value from basic cutting data by speed factor. Insert size l Max D.O.C. a p Wiper flat width B 179

Plunge milling The insert design and the insert clamping system determines the tool s suitability for plunging. Maximum cutting depth recommendations for suitable tools are in the tables below. Note that the definition of ap is different for plunge milling. Use the cutting speeds and feed rates recommended for normal operations. Milling cutters designed for plunge milling only can be found in the MN Milling book 2. Plunging ap Type of cutter 220.43-05 220.43-07W 217/220.43 07SA/07S 217.69-06 217/220.69-09 217/220.69-12 217/220.69-18 217/220.69 15H/15.xH 217/220.29-03 217/220.29-04 217/220.29-05 217/220.29-06 217/220.29-08 217/220.29-10 217/220.96-08 Plunging - Axial feed direction ap max inch.197.275.472.138.157.275.413.394.118.157.197.236.315.394.150** % of ap max Slotting - Axial feed direction Overhang ratio Dc ap max can normally be used if the overhang ratio is up to 4 but should be reduced at higher ratios as shown in the graph. Type of cutter Type of cutter 220.43-05 220.43-05 220.43-07W 220.43-07W 217/220.43 07SA/07S 217/220.43 07SA/07S 217.69-06 217.69-06 217/220.69-09 217/220.69-09 217/220.69-12 217/220.69-12 217/220.69-18 217/220.69 15H/15.xH 217/220.69 15H/15.xH 217/220.29-03 217/220.29-03 217/220.29-04 217/220.29-04 217/220.29-05 217/220.29-05 217/220.29-06 217/220.29-06 217/220.29-08 217/220.29-08 217/220.29-10 217/220.29-10 217/220.96-08 ap max ap inch max mm.197* 5*.275* 7*.275* 7*.138* 3,5*.157* 4*.275* 7*.413* 10*.394* 3.118 4.157 5.197 6.236 8.315 10.394.150** Type of cutter Type of cutter 220.43-05 220.43-05 220.43-07W 220.43-07W 217/220.43 07SA/07S 217/220.43 07SA/07S 217.69-06 217.69-06 217/220.69-09 217/220.69-09 217/220.69-12 217/220.69-12 217/220.69-18 217/220.69 15H/15.xH 217/220.69 15H/15.xH 217/220.29-03 217/220.29-03 217/220.29-04 217/220.29-04 217/220.29-05 217/220.29-05 217/220.29-06 217/220.29-06 217/220.29-08 217/220.29-08 217/220.29-10 217/220.29-10 217/220.96-08 * To create a flat bottom surface, ap max = the wiper flat width. Dimensions to be found on the cutting data pages. ** Max. a p for Seco Material Groups 12-15 is.295. ap max ap inch max mm.197* 5*.275* 7 *.275* 7*.138* 3,5*.157* 4*.275* 7*.413 10*.394* 3.118 4.157 5.197 6.236 8.315 10.394.150** 180 180 Sq 6 Plunge Data.indd 180 2/12/2010 7:46:37 AM

181 XNEX Inserts.fm Page 181 Thursday, February 11, 2010 2:59 PM Milling Inserts XNEX 0806 Tolerances (± inch) l s XNEX.001.001 Size l s 0806.491.250-.255 Coated Grades Uncoated Inserts Part no. r ε rake Cutting ME09/M13/MD15 MH1000 MK1500 MK2000 MK3000 MP1500 MP2500 MP3000 T150M T25M T250M T350M MS2500 F15M F17M F20M F25M F30M F40M S60M HX H15 H25 XNEX 080608TR-ME09.031 27 [ [ [ [ [ [ [ [ 080608TR-M13.031 22 [ [ [ [ [ [ [ [ 080608TR-MD15.031 17 [ [ [ [ [ [ [ [ XNEX 080612TR-ME09.047 27 [ [ [ [ [ 080612TR-M13.047 22 [ [ [ [ [ [ 080612TR-MD15.047 17 [ [ [ [ XNEX 080616TR-ME09.063 27 [ [ [ [ [ [ [ [ 080616TR-M13.063 22 [ [ [ [ [ [ [ [ 080616TR-MD15.063 17 [ [ [ [ [ [ [ [ [ Stock standard Subject to change refer to current price and stock-list 181

182 Power Turbo.fm Page 182 Thursday, February 11, 2010 3:06 PM Square shoulder and slot milling cutters Power Turbo R217.69-18A Cyl/Weldon Cylindrical Seco/Weldon For insert selection and cutting data recommendations, see MN Turning. For complete insert program, see MN Turning For ramping and helical interpolation, see page 184. Tool angles: γ o = -10-7 γ p = + 5 + 8 γ f = -10-7 Dimensions in Inch D c dm m l 2 l 3 l c a p Type of mounting R217.69-01.00-3-18-2AN 1.00 1.00 3.94 1.57 2.36.669 2 0.80 Cyl/Weldon 13800 XO.X 1806-01.25.3-18.2A 1.25 1.25 4.33 1.57 2.76.669 2 1.00 Cyl/Weldon 11100 XO.X 1806-01.25.3-18.3A 1.25 1.25 4.33 1.57 2.76.669 3 1.00 Cyl/Weldon 11100 XO.X 1806-01.50.3-18.3A 1.50 1.25 4.72 1.57 3.15.669 3 1.70 Cyl/Weldon 9900 XO.X 1806-01.50.3-18.4A 1.50 1.25 4.72 1.57 3.15.669 4 1.70 Cyl/Weldon 9900 XO.X 1806 R217.69-01.00-0-18-2LAN 1.00 1.00 7.00 1.50 5.50.669 2 1.40 Cylindrical 13800 XO.X 1806-01.25.0-18.2LA 1.25 1.00 7.68 1.57 6.10.669 2 1.80 Cylindrical 11100 XO.X 1806-01.25.0-18.3LA 1.25 1.00 7.68 1.57 6.10.669 3 1.80 Cylindrical 11100 XO.X 1806-01.50.0-18.3LA 1.50 1.25 8.27 1.77 6.50.669 3 2.00 Cylindrical 9900 XO.X 1806-01.50.0-18.4LA 1.50 1.25 8.27 1.77 6.50.669 4 2.00 Cylindrical 9900 XO.X 1806-02.00.0-18.5LA 2.00 1.50 8.66 1.77 6.89.669 5 2.30 Cylindrical 8900 XO.X 1806 R217.69-01.00-3S-18-2AN 1.00 1.00 4.53 1.50 2.44.669 2 1.00 Seco/Weldon 13800 XO.X 1806-01.25.3S-18.2A 1.25 1.00 4.55 1.57 2.42.669 2 1.10 Seco/Weldon 11100 XO.X 1806-01.50.3S-18.3A 1.50 1.25 4.78 1.81 2.42.669 3 1.80 Seco/Weldon 9900 XO.X 1806 R217.69-01.00-3S-18-2LAN 1.00 1.00 6.03 3.00 2.44.669 2 1.22 Seco/Weldon 13800 XO.X 1806 When using inserts with corner radius >.157 inch, the cutter body must be modified. Spare parts, included in delivery. Locking screw Key For cutter R217.69-18-1.00 C04508-T20P T20P-3 R217.69-18-1.25/1.50/2.00 C04510-T20P T20P-3 Please check availability in current price and stock-list. Locking screw torque value 44 in/lbs. Dynamomentic keys are available, see page 261. 182

183 Power Turbo Combi.fm Page 183 Thursday, February 11, 2010 3:03 PM Square shoulder and slot milling cutters Power Turbo R217.69-18A For small depth of cut For insert selection and cutting data recommendations, see MN Turning. For complete insert program, see MN Turning. For ramping and helical interpolation, see page 184. Tool angles: γ o = -12-6 γ p = + 3 + 8 γ f = -12-6 Dimensions in Inch D c l 1 M a p Type of mounting R217.69-01.00-12RE-18-2AN 1.00 1.57 M12.669 2.30 Combimaster* 13800 XO..1806-1.25-16RE-18-2A 1.25 1.77 M16.669 2.75 Combimaster* 11100 XO..1806-1.25-16RE-18-3A 1.25 1.77 M16.669 3.75 Combimaster* 11100 XO..1806-1.50-16RE-18-3A 1.50 1.77 M16.669 3.78 Combimaster* 9900 XO..1806-1.50-16RE-18-4A 1.50 1.77 M16.669 4.78 Combimaster* 9900 XO..1806 Spare parts, included in delivery. Locking screw Key *For Combimaster shanks and dimensions, see MN Milling book 2, pages 94-107. When using inserts with corner radius >.157 inch, the cutter body must be modified. For cutter R217.69-18-1.00 C04508-T20P T20P-3 R217.69-18-1.25/1.50 C04510-T20P T20P-3 Please check availability in current price and stock-list. Locking screw torque value 44 in/lbs. Dynamomentic keys are available, see page 261. 183

Ramping & Helical interpolation ramping Ramping The milling cutter design and the clearance on the bottom side of the chosen insert determines the tool s suitability for ramping. Maximum ramping angle and cutting depth recommendations for suitable tools are found in the tables below. Use the cutting speeds and feed rates recommended for normal operations. 217/220.69-18* Cutter dia Ø Dc inch ap max in. max 1.00.669 11 1.25.669 7.15 1.50.669 4.5 2.00.669 3.15 2.50.669 2.4 3.00.669 1.55 4.00.669 1.3 5.00.669 1 6.00.669 0.65 *When changing ramping direction, using max. ramping angle, retract the cutter.075 in. Helical interpolation ramping The milling cutter design and the clearance on the bottom side of the chosen insert determines the tool s suitability for helical interpolation ramping. Maximum and minimum hole diameters and maximum cutting depth per revolution recommendations for suitable tools are in the tables below. Use the cutting speeds and feed rates recommended for normal operations. 217/220.69-18 Cutter dia Ø Dc inch C min/ap max C min Ø ap max in. C max/ap max C max Ø ap max in. 1.00 1.142.095 1.920.610 1.25 1.659.161 2.420.465 1.50 2.226.184 2.882.368 2.00 3.121.201 3.882.331 2.50 4.133.214 4.882.310 3.00 5.303.224 5.882.294 4.00 7.092.229 7.882.283 5.00 9.077.233 9.882.274 6.00 11.457.224 11.882.254 184 184 Power Ramp+Tech.indd 184 2/12/2010 7:47:47 AM

JaBro-soLiD 2 VersatiLitY and PerForManCe in square shoulder MiLLing MaKing it easy in all MateriaL groups Seco s new family of solid carbide milling cutters, Jabro-Solid², is designed to meet the challenges of the General machining market. These easy to use and fully versatile square end mills give you complete flexibility and an excellent price-performance ratio in all material groups. two types For all Your needs Js510 series easy to use 2-3-4 flutes means you have optimum choice and complete flexibility Increased core diameters per cutting length gives added stability Siron-A coating for longer tool life Js550 series increased PerForManCe The double core provides excellent stability Differential tooth pitch for chatter free machining Polished Siron-A gives better chip flow and superior tool life 185 185-208 Jabro Solid 2 US G5.indd 185 2/12/2010 11:48:19 AM

Positioning & Features HPM JHP992 JHP950 JHP760 JHP992 JHP950 JHP490 JHP750 JHP170 JS553 & 554 JABRO-SOLID 2 JS512, 513 & 514 (L & XL) Steel Stainless Steel Cast Iron Nonferrous Superalloys Hardened Steel JS512, 513 & 514 Versatile tools with good price / performance ratio These cutters are designed to give fully flexible & efficient machining with an excellent price / performance ratio in a wide range of materials. Increased core diameter 2-3-4 flutes in a full range of diameters and lengths SIRON-A coating Improves stability, allowing larger cuts, thus reducing cycle times and costs. Gives optimum choice per application and full flexibility, reducing tool inventory & costs. Improves tool life, reducing tool costs. S553 and 554 Universal Performance Cutters Both 3 and 4 flute end mill cutters are designed with additional features to give improved performance and increased productivity. Double core Edge preparation Differential pitch Polished coating For stability, reduced tool deflection higher MRR. Strong cutting edge & increased tool life. Reduces chatter, allowing increased cutting data to reduce cycle times & increase throughput Smooth surface allows the chip to flow freely across the cutting face, reducing friction & increasing tool life. 186 185-208 Jabro Solid 2 US G5.indd 186 2/12/2010 11:48:19 AM

Jabro-Solid2 Tool Selection based on workpiece material Name Pages JS512 188-191 JS513 192-195 JS514 196-199 JS553 200-203 JS554 204-207 Cylindrical [ [ [ [ [ [ [ Weldon ] ] ] [ ] [ [ Type of cutter Shank Number of flutes Diameter range 2 3 4 1/8-1 (1-25 mm) 1/8-1 (1-25 mm) 1/8-1 (1-25 mm) 3 1/8-1 (2-25 mm) 4 1/4-1 (6-25 mm) Lengths Operation Seco Material Group 1-2 Steel<450 N/mm2 3-4 450<700 N/mm2 700<1200 N/mm2 7 Hardened steel 8-9 Stainless steel 5-6 10-11 Stainless steel 12-13 Cast iron 14-15 Cast iron 16 Aluminum 17 Aluminum 22 Titanium [ In stock ] Weldon available, delivery time is 3 days Preferred choice Alternative choice 187 185-208 Jabro Solid 2 US G5.indd 187 2/12/2010 11:48:24 AM

Jabro-Solid 2 JS512 Material 188 E 1-2 E 3-4 E 5-6 a p x D c a e x D c 0.7 1 0.7 1 0.7 1 v c (sf/min) 425 (360-490) 395 (330-460) 330 (260-395) M/A/D 7a 48>52HRc 0.2 1 165 (130-195) E 8-9 E 10-11 E 12-13 E 14-15 E 16-17 E 22 Material A/D/E 1-2 A/D/E 3-4 A/D/E 5-6 0.6 1 0.5 1 0.8 1 0.7 1 0.4 1 0.5 1 a p x D c a e x D c 1.2 0.3 1.2 0.3 1.2 0.3 260 (230-295) 165 (130-195) 490 (425-560) 425 (360-490) 1315 (490-1640) 195 (130-260) v c (sf/min) 540 (460-590) 490 (425-560) 410 (345-475) M/A/D 7a 48>52HRc 0.6 0.03 215 (180-245) E/A 8-9 E/A 10-11 A/D/E 12-13 A/D/E 14-15 E 16-17 E 22 1 0.3 1 0.3 1.2 0.3 1.2 0.3 1 0.3 1 0.3 330 (295-360) 215 (180-245) 625 (560-690) 540 (475-605) 1640 (490-1970) 245 (180-310) D c (inch) 1/8 3/16 1/4 5/16 3/8 1/2 5/8 3/4 1 n (rev/min) 13790 8280 6900 5170 4140 3450 2590 2070 1660 f z (in) 0.0006 0.001 0.0012 0.0016 0.002 0.0023 0.0031 0.0039 0.0048 v f (in/min) 16 16 16 16 16 16 16 16 16 n (rev/min) 12730 7640 6370 4770 3820 3180 2390 1910 1530 f z (in) 0.0006 0.001 0.0012 0.0016 0.002 0.0024 0.0031 0.0039 0.0049 v f (in/min) 15 15 15 15 15 15 15 15 15 n (rev/min) 10610 6370 5310 3980 3180 2650 1990 1590 1270 f z (in) 0.0006 0.001 0.0012 0.0016 0.002 0.0024 0.0031 0.004 0.005 v f (in/min) 13 13 13 13 13 13 13 13 13 n (rev/min) 5310 3180 2650 1990 1590 1330 990 800 640 f z (in) 0.0002 0.0004 0.0005 0.0006 0.0008 0.0009 0.0013 0.0016 0.002 v f (in/min) 3 3 3 3 3 3 3 3 3 n (rev/min) 8490 5090 4240 3180 2550 2120 1590 1270 1020 f z (in) 0.0006 0.001 0.0012 0.0016 0.002 0.0024 0.0031 0.0039 0.0049 v f (in/min) 10 10 10 10 10 10 10 10 10 n (rev/min) 5310 3180 2650 1990 1590 1330 990 800 640 f z (in) 0.0006 0.001 0.0012 0.0016 0.002 0.0024 0.0032 0.0039 0.0049 v f (in/min) 6 6 6 6 6 6 6 6 6 n (rev/min) 15920 9550 7960 5970 4770 3980 2980 2390 1910 f z (in) 0.0006 0.001 0.0012 0.0016 0.002 0.0024 0.0032 0.0039 0.005 v f (in/min) 19 19 19 19 19 19 19 19 19 n (rev/min) 13790 8280 6900 5170 4140 3450 2590 2070 1660 f z (in) 0.0006 0.001 0.0012 0.0016 0.002 0.0024 0.0032 0.004 0.005 v f (in/min) 17 17 17 17 17 17 17 17 17 n (rev/min) 42440 25460 21220 15920 12730 10610 7960 6370 5090 f z (in) 0.0007 0.0012 0.0014 0.0019 0.0024 0.0028 0.0038 0.0047 0.0059 v f (in/min) 60 60 60 60 60 60 60 60 60 n (rev/min) 6370 3820 3180 2390 1910 1590 1190 950 760 f z (in) 0.0005 0.0008 0.0009 0.0013 0.0016 0.0019 0.0026 0.0032 0.004 v f (in/min) 6 6 6 6 6 6 6 6 6 D c (inch) 1/8 3/16 1/4 5/16 3/8 1/2 5/8 3/4 1 n (rev/min) 17510 10500 8750 6570 5250 4380 3280 2630 2100 f z (in) 0.0009 0.0016 0.0019 0.0025 0.0031 0.0037 0.005 0.0062 0.0078 v f (in/min) 33 33 33 33 33 33 33 33 33 n (rev/min) 15920 9550 7960 5970 4770 3980 2980 2390 1910 f z (in) 0.0009 0.0016 0.0019 0.0025 0.0031 0.0037 0.005 0.0062 0.0078 v f (in/min) 30 30 30 30 30 30 30 30 30 n (rev/min) 13260 7960 6630 4970 3980 3320 2490 1990 1590 f z (in) 0.0007 0.0012 0.0015 0.002 0.0025 0.003 0.0039 0.005 0.0062 v f (in/min) 20 20 20 20 20 20 20 20 20 n (rev/min) 6900 4140 3450 2590 2070 1720 1290 1030 830 f z (in) 0.0014 0.0023 0.0028 0.0037 0.0046 0.0055 0.0073 0.0092 0.0114 v f (in/min) 19 19 19 19 19 19 19 19 19 n (rev/min) 10610 6370 5310 3980 3180 2650 1990 1590 1270 f z (in) 0.0009 0.0015 0.0019 0.0025 0.0031 0.0037 0.005 0.0062 0.0078 v f (in/min) 20 20 20 20 20 20 20 20 20 n (rev/min) 6900 4140 3450 2590 2070 1720 1290 1030 830 f z (in) 0.0009 0.0016 0.0019 0.0025 0.0031 0.0038 0.005 0.0063 0.0078 v f (in/min) 13 13 13 13 13 13 13 13 13 n (rev/min) 20160 12100 10080 7560 6050 5040 3780 3020 2420 f z (in) 0.0009 0.0016 0.0019 0.0025 0.0031 0.0037 0.005 0.0063 0.0078 v f (in/min) 38 38 38 38 38 38 38 38 38 n (rev/min) 17510 10500 8750 6570 5250 4380 3280 2630 2100 f z (in) 0.0009 0.0016 0.0019 0.0025 0.0031 0.0037 0.005 0.0062 0.0078 v f (in/min) 33 33 33 33 33 33 33 33 33 n (rev/min) 53050 31830 26530 19890 15920 13260 9950 7960 6370 f z (in) 0.0013 0.0022 0.0026 0.0035 0.0043 0.0052 0.0069 0.0086 0.0108 v f (in/min) 137 137 137 137 137 137 137 137 137 n (rev/min) 7960 4770 3980 2980 2390 1990 1490 1190 950 f z (in) 0.0009 0.0015 0.0017 0.0023 0.0029 0.0035 0.0046 0.0058 0.0072 v f (in/min) 14 14 14 14 14 14 14 14 14 For more detailed information see pages 208, 266. E=emulsion A=air D=dry M=mist spray All cutting data are target values. 185-208 Jabro Solid 2 US G5.indd 188 2/12/2010 11:48:25 AM

Jabro-Solid 2 - JS512 Inch Tolerances: dm m = h5, D c = e8 c = D c 3/16 = +.0008, 3/16 < D c 3/8 = +.0012, 3/8 < D c 1/2 = +.0016, 1/2 < D c 5/8 = +.0020, 5/8 < D c 3/4 = +.0024, 3/4 < D c 1 = +.0028 Run-out JS512 =.0008 JS512L =.0012 JS512XL =.0012 Type JS512 D c dm m l 2 a p c x 45 5120125Z2.0-SIRON-A 1/8 1/8 1 1/2 1/4 0.001 [ 2 5120187Z2.0-SIRON-A 3/16 3/16 1 1/2 3/8 0.002 [ 2 5120250Z2.0-SIRON-A 1/4 1/4 2 1/2 0.003 [ 2 5120312Z2.0-SIRON-A 5/16 5/16 2 1/4 5/8 0.003 [ 2 5120375Z2.0-SIRON-A 3/8 3/8 2 3/4 3/4 0.004 [ 2 5120500Z2.3-SIRON-A 1/2 1/2 3 1/4 1 0.005 [ 2 5120500Z2.0-SIRON-A 1/2 1/2 3 1/4 1 0.005 [ 2 5120625Z2.3-SIRON-A 5/8 5/8 3 1/2 1 1/4 0.006 [ 2 5120625Z2.0-SIRON-A 5/8 5/8 3 1/2 1 1/4 0.006 [ 2 5120750Z2.3-SIRON-A 3/4 3/4 4 1 3/8 0.008 [ 2 5120750Z2.0-SIRON-A 3/4 3/4 4 1 3/8 0.008 [ 2 5121000Z2.3-SIRON-A 1 1 4 1 3/8 0.010 [ 2 5121000Z2.0-SIRON-A 1 1 4 1 3/8 0.010 [ 2 512L0125Z2.0-SIRON-A 1/8 1/8 2 7/16 0.001 [ 2 512L0187Z2.0-SIRON-A 3/16 3/16 2 5/8 0.002 [ 2 512L0250Z2.0-SIRON-A 1/4 1/4 3 7/8 0.003 [ 2 512L0312Z2.0-SIRON-A 5/16 5/16 3 1 0.003 [ 2 512L0375Z2.0-SIRON-A 3/8 3/8 3 1/2 1 1/4 0.004 [ 2 512L0500Z2.3-SIRON-A 1/2 1/2 4 1 1/2 0.005 [ 2 512L0500Z2.0-SIRON-A 1/2 1/2 4 1 1/2 0.005 [ 2 512L0625Z2.3-SIRON-A 5/8 5/8 4 1/2 2 1/4 0.006 [ 2 512L0625Z2.0-SIRON-A 5/8 5/8 4 1/2 2 1/4 0.006 [ 2 512L0750Z2.3-SIRON-A 3/4 3/4 5 2 3/8 0.008 [ 2 512L0750Z2.0-SIRON-A 3/4 3/4 5 2 3/8 0.008 [ 2 512L1000Z2.3-SIRON-A 1 1 5 2 3/8 0.010 [ 2 512L1000Z2.0-SIRON-A 1 1 5 2 3/8 0.010 [ 2 512XL0125Z2.0-SIRON-A 1/8 1/8 2 1/2 5/8 0.001 [ 2 512XL0187Z2.0-SIRON-A 3/16 3/16 3 1 0.002 [ 2 512XL0250Z2.0-SIRON-A 1/4 1/4 4 1 1/4 0.003 [ 2 512XL0312Z2.0-SIRON-A 5/16 5/16 4 1 1/2 0.003 [ 2 512XL0375Z2.0-SIRON-A 3/8 3/8 4 2 0.004 [ 2 512XL0500Z2.3-SIRON-A 1/2 1/2 5 2 1/2 0.005 [ 2 512XL0500Z2.0-SIRON-A 1/2 1/2 5 2 1/2 0.005 [ 2 512XL0625Z2.3-SIRON-A 5/8 5/8 5 2 3/4 0.006 [ 2 512XL0625Z2.0-SIRON-A 5/8 5/8 5 2 3/4 0.006 [ 2 512XL0750Z2.3-SIRON-A 3/4 3/4 6 3 0.008 [ 2 512XL0750Z2.0-SIRON-A 3/4 3/4 6 3 0.008 [ 2 512XL1000Z2.3-SIRON-A 1 1 6 3 0.010 [ 2 512XL1000Z2.0-SIRON-A 1 1 6 3 0.010 [ 2 Cylindrical Weldon z n ] Weldon available for cylindrical shanks (delivery time is 3 days). Add W after the when ordering: 512L100Z2.0-SIRON-AW. Picture key symbols please see page 14-15 in Solid End Mills MN2008. 189 185-208 Jabro Solid 2 US G5.indd 189 2/12/2010 11:48:26 AM

Jabro-Solid 2 JS512 Material 190 E 1-2 E 3-4 E 5-6 a p x D c a e x D c 0.7 1 0.7 1 0.7 1 v c (sf/min) 425 (360-490) 395 (330-460) 330 (260-395) M/A/D 7a 48>52HRc 0.2 1 165 (130-195) E 8-9 E 10-11 E 12-13 E 14-15 E 16-17 E 22 Material A/D/E 1-2 A/D/E 3-4 A/D/E 5-6 0.6 1 0.5 1 0.8 1 0.7 1 0.4 1 0.5 1 a p x D c a e x D c 1.2 0.3 1.2 0.3 1.2 0.3 260 (230-295) 165 (130-195) 490 (425-560) 425 (360-490) 1315 (490-1640) 195 (130-260) v c (sf/min) 540 (460-590) 490 (425-560) 410 (345-475) M/A/D 7a 48>52HRc 0.6 0.03 215 (180-245) E/A 8-9 E/A 10-11 A/D/E 12-13 A/D/E 14-15 E 16-17 E 22 1 0.3 1 0.3 1.2 0.3 1.2 0.3 1 0.3 1 0.3 330 (295-360) 215 (180-245) 625 (560-690) 540 (475-605) 1640 (490-1970) 245 (180-310) D c (mm) 1 2 3 4 5 6 8 10 12 16 20 25 n (rev/min) 41380 20690 13790 10350 8280 6900 5170 4140 3450 2590 2070 1660 f z (in) 0.0002 0.0004 0.0006 0.0008 0.001 0.0012 0.0016 0.002 0.0023 0.0031 0.0039 0.0048 v f (in/min) 16 16 16 16 16 16 16 16 16 16 16 16 n (rev/min) 38200 19100 12730 9550 7640 6370 4770 3820 3180 2390 1910 1530 f z (in) 0.0002 0.0004 0.0006 0.0008 0.001 0.0012 0.0016 0.002 0.0024 0.0031 0.0039 0.0049 v f (in/min) 15 15 15 15 15 15 15 15 15 15 15 15 n (rev/min) 31830 15920 10610 7960 6370 5310 3980 3180 2650 1990 1590 1270 f z (in) 0.0002 0.0004 0.0006 0.0008 0.001 0.0012 0.0016 0.002 0.0024 0.0031 0.004 0.005 v f (in/min) 13 13 13 13 13 13 13 13 13 13 13 13 n (rev/min) 15920 7960 5310 3980 3180 2650 1990 1590 1330 990 800 640 f z (in) 0.0001 0.0002 0.0002 0.0003 0.0004 0.0005 0.0006 0.0008 0.0009 0.0013 0.0016 0.002 v f (in/min) 3 3 3 3 3 3 3 3 3 3 3 3 n (rev/min) 25460 12730 8490 6370 5090 4240 3180 2550 2120 1590 1270 1020 f z (in) 0.0002 0.0004 0.0006 0.0008 0.001 0.0012 0.0016 0.002 0.0024 0.0031 0.0039 0.0049 v f (in/min) 10 10 10 10 10 10 10 10 10 10 10 10 n (rev/min) 15920 7960 5310 3980 3180 2650 1990 1590 1330 990 800 640 f z (in) 0.0002 0.0004 0.0006 0.0008 0.001 0.0012 0.0016 0.002 0.0024 0.0032 0.0039 0.0049 v f (in/min) 6 6 6 6 6 6 6 6 6 6 6 6 n (rev/min) 47750 23870 15920 11940 9550 7960 5970 4770 3980 2980 2390 1910 f z (in) 0.0004 0.0004 0.0006 0.0008 0.001 0.0012 0.0016 0.002 0.0024 0.0032 0.0039 0.005 v f (in/min) 19 19 19 19 19 19 19 19 19 19 19 19 n (rev/min) 41380 20690 13790 10350 8280 6900 5170 4140 3450 2590 2070 1660 f z (in) 0.0004 0.0004 0.0006 0.0008 0.001 0.0012 0.0016 0.002 0.0024 0.0032 0.004 0.005 v f (in/min) 17 17 17 17 17 17 17 17 17 17 17 17 n (rev/min) 127320 63660 42440 31830 25460 21220 15920 12730 10610 7960 6370 5090 f z (in) 0.0002 0.0005 0.0007 0.0009 0.0012 0.0014 0.0019 0.0024 0.0028 0.0038 0.0047 0.0059 v f (in/min) 60 60 60 60 60 60 60 60 60 60 60 60 n (rev/min) 19100 9550 6370 4770 3820 3180 2390 1910 1590 1190 950 760 f z (in) 0.0002 0.0003 0.0005 0.0006 0.0008 0.0009 0.0013 0.0016 0.0019 0.0026 0.0032 0.004 v f (in/min) 6 6 6 6 6 6 6 6 6 6 6 6 D c (mm) 1 2 3 4 5 6 8 10 12 16 20 25 n (rev/min) 52520 26260 17510 13130 10500 8750 6570 5250 4380 3280 2630 2100 f z (in) 0.0003 0.0006 0.0009 0.0013 0.0016 0.0019 0.0025 0.0031 0.0037 0.005 0.0062 0.0078 v f (in/min) 33 33 33 33 33 33 33 33 33 33 33 33 n (rev/min) 47750 23870 15920 11940 9550 7960 5970 4770 3980 2980 2390 1910 f z (in) 0.0003 0.0006 0.0009 0.0013 0.0016 0.0019 0.0025 0.0031 0.0037 0.005 0.0062 0.0078 v f (in/min) 30 30 30 30 30 30 30 30 30 30 30 30 n (rev/min) 39790 19890 13260 9950 7960 6630 4970 3980 3320 2490 1990 1590 f z (in) 0.0002 0.0005 0.0007 0.001 0.0012 0.0015 0.002 0.0025 0.003 0.0039 0.005 0.0062 v f (in/min) 20 20 20 20 20 20 20 20 20 20 20 20 n (rev/min) 20690 10350 6900 5170 4140 3450 2590 2070 1720 1290 1030 830 f z (in) 0.0005 0.0009 0.0014 0.0018 0.0023 0.0028 0.0037 0.0046 0.0055 0.0073 0.0092 0.0114 v f (in/min) 19 19 19 19 19 19 19 19 19 19 19 19 n (rev/min) 31830 15920 10610 7960 6370 5310 3980 3180 2650 1990 1590 1270 f z (in) 0.0003 0.0006 0.0009 0.0012 0.0015 0.0019 0.0025 0.0031 0.0037 0.005 0.0062 0.0078 v f (in/min) 20 20 20 20 20 20 20 20 20 20 20 20 n (rev/min) 20690 10350 6900 5170 4140 3450 2590 2070 1720 1290 1030 830 f z (in) 0.0003 0.0006 0.0009 0.0013 0.0016 0.0019 0.0025 0.0031 0.0038 0.005 0.0063 0.0078 v f (in/min) 13 13 13 13 13 13 13 13 13 13 13 13 n (rev/min) 60480 30240 20160 15120 12100 10080 7560 6050 5040 3780 3020 2420 f z (in) 0.0003 0.0006 0.0009 0.0013 0.0016 0.0019 0.0025 0.0031 0.0037 0.005 0.0063 0.0078 v f (in/min) 38 38 38 38 38 38 38 38 38 38 38 38 n (rev/min) 52520 26260 17510 13130 10500 8750 6570 5250 4380 3280 2630 2100 f z (in) 0.0003 0.0006 0.0009 0.0013 0.0016 0.0019 0.0025 0.0031 0.0037 0.005 0.0062 0.0078 v f (in/min) 33 33 33 33 33 33 33 33 33 33 33 33 n (rev/min) 159150 79580 53050 39790 31830 26530 19890 15920 13260 9950 7960 6370 f z (in) 0.0004 0.0009 0.0013 0.0017 0.0022 0.0026 0.0035 0.0043 0.0052 0.0069 0.0086 0.0108 v f (in/min) 137 137 137 137 137 137 137 137 137 137 137 137 n (rev/min) 23870 11940 7960 5970 4770 3980 2980 2390 1990 1490 1190 950 f z (in) 0.0003 0.0006 0.0009 0.0011 0.0015 0.0017 0.0023 0.0029 0.0035 0.0046 0.0058 0.0072 v f (in/min) 14 14 14 14 14 14 14 14 14 14 14 14 For more detailed information see pages 208, 266. E=emulsion A=air D=dry M=mist spray All cutting data are target values. 185-208 Jabro Solid 2 US G5.indd 190 2/12/2010 11:48:27 AM

Jabro-Solid 2 - JS512 Metric Type A Type B Tolerances: dm m = h5, Dc = e8 c = D c 3=+0.01, 3<D c 6=+0.02, 6<D c 10=+0.03, 10<D c 14=+0.04, 14<D c 18=+0.05, 18<D c 24=+0.06, 24<D c 30=+0.07 Run-out JS512 = 0.02 JS512L = 0.03 JS512XL = 0.03 Dimensions in mm Type Type D c dm m l 2 a p c x 45 z n JS512 512010Z2.0-SIRON-A A 1 3 40 2 0.010 [ 2 512015Z2.0-SIRON-A A 1.5 3 40 3 0.015 [ 2 512021Z2.0-SIRON-A A 2 3 40 4 0.020 [ 2 512020Z2.0-SIRON-A A 2 6 50 4 0.020 [ ] 2 512031Z2.0-SIRON-A B 3 3 40 6 0.030 [ 2 512030Z2.0-SIRON-A A 3 6 50 6 0.030 [ ] 2 512041Z2.0-SIRON-A B 4 4 40 8 0.040 [ 2 512040Z2.0-SIRON-A A 4 6 50 8 0.040 [ ] 2 512051Z2.0-SIRON-A B 5 5 50 10 0.050 [ 2 512050Z2.0-SIRON-A A 5 6 50 10 0.050 [ ] 2 512060Z2.0-SIRON-A B 6 6 55 12 0.060 [ ] 2 512080Z2.0-SIRON-A B 8 8 60 16 0.080 [ ] 2 512100Z2.0-SIRON-A B 10 10 70 20 0.100 [ ] 2 512120Z2.0-SIRON-A B 12 12 75 24 0.120 [ ] 2 512160Z2.0-SIRON-A B 16 16 90 30 0.160 [ ] 2 512200Z2.0-SIRON-A B 20 20 100 35 0.200 [ ] 2 512250Z2.0-SIRON-A B 25 25 110 40 0.250 [ ] 2 512L010Z2.0-SIRON-A A 1 3 40 3 0.010 [ 2 512L015Z2.0-SIRON-A A 1.5 3 40 6 0.015 [ 2 512L020Z2.0-SIRON-A A 2 6 50 7 0.020 [ ] 2 512L030Z2.0-SIRON-A A 3 6 55 10 0.030 [ ] 2 512L040Z2.0-SIRON-A A 4 6 55 14 0.040 [ ] 2 512L050Z2.0-SIRON-A A 5 6 60 18 0.050 [ ] 2 512L060Z2.0-SIRON-A B 6 6 60 20 0.060 [ ] 2 512L080Z2.0-SIRON-A B 8 8 70 28 0.080 [ ] 2 512L100Z2.0-SIRON-A B 10 10 85 35 0.100 [ ] 2 512L120Z2.0-SIRON-A B 12 12 100 42 0.120 [ ] 2 512L160Z2.0-SIRON-A B 16 16 110 50 0.160 [ ] 2 512L200Z2.0-SIRON-A B 20 20 125 60 0.200 [ ] 2 512L250Z2.0-SIRON-A B 25 25 140 70 0.250 [ ] 2 512XL020Z2.0-SIRON-A A 2 6 55 10 0.020 [ ] 2 512XL030Z2.0-SIRON-A A 3 6 60 15 0.030 [ ] 2 512XL040Z2.0-SIRON-A A 4 6 65 20 0.040 [ ] 2 512XL050Z2.0-SIRON-A A 5 6 65 25 0.050 [ ] 2 512XL060Z2.0-SIRON-A B 6 6 70 30 0.060 [ ] 2 512XL080Z2.0-SIRON-A B 8 8 85 40 0.080 [ ] 2 512XL100Z2.0-SIRON-A B 10 10 100 50 0.100 [ ] 2 512XL120Z2.0-SIRON-A B 12 12 115 60 0.120 [ ] 2 512XL160Z2.0-SIRON-A B 16 16 130 70 0.160 [ ] 2 512XL200Z2.0-SIRON-A B 20 20 150 80 0.200 [ ] 2 512XL250Z2.0-SIRON-A B 25 25 160 90 0.250 [ ] 2 ] Weldon available for cylindrical shanks (delivery time is 3 days). Add W after the when ordering: 512L100Z2.0-SIRON-AW. Picture key symbols please see page 14-15 in Solid End Mills MN2008. Cylindrical Weldon 191 185-208 Jabro Solid 2 US G5.indd 191 2/12/2010 11:48:28 AM

Jabro-Solid 2 JS513 Material E 1-2 E 3-4 E 5-6 a p x D c a e x D c 0.7 1 0.7 1 0.7 1 v c (sf/min) 425 (360-490) 395 (330-460) 330 (260-395) M/A/D 7a 48>52HRc 0.2 1 165 (130-195) E 8-9 E 10-11 E 12-13 E 14-15 E 16-17 E 22 0.6 1 0.5 1 0.8 1 0.7 1 260 (230-295) 165 (130-195) 490 (425-560) 425 (360-490) 0.4 1 195 (130-260) D c (inch) 1/8 3/16 1/4 5/16 3/8 1/2 5/8 3/4 1 n (rev/min) 13790 8280 6900 5170 4140 3450 2590 2070 1660 f z (in) 0.0005 0.0008 0.0009 0.0013 0.0016 0.0019 0.0025 0.0032 0.0039 v f (in/min) 20 20 20 20 20 20 20 20 20 n (rev/min) 12730 7640 6370 4770 3820 3180 2390 1910 1530 f z (in) 0.0005 0.0008 0.0009 0.0013 0.0016 0.0019 0.0025 0.0031 0.0039 v f (in/min) 18 18 18 18 18 18 18 18 18 n (rev/min) 10610 6370 5310 3980 3180 2650 1990 1590 1270 f z (in) 0.0005 0.0008 0.0009 0.0013 0.0016 0.0019 0.0025 0.0031 0.0039 v f (in/min) 15 15 15 15 15 15 15 15 15 n (rev/min) 5310 3180 2650 1990 1590 1330 990 800 640 f z (in) 0.0002 0.0004 0.0005 0.0006 0.0008 0.0009 0.0013 0.0016 0.0019 v f (in/min) 4 4 4 4 4 4 4 4 4 n (rev/min) 8490 5090 4240 3180 2550 2120 1590 1270 1020 f z (in) 0.0004 0.0006 0.0007 0.0009 0.0012 0.0014 0.0019 0.0024 0.003 v f (in/min) 9 9 9 9 9 9 9 9 9 n (rev/min) 5310 3180 2650 1990 1590 1330 990 800 640 f z (in) 0.0004 0.0006 0.0007 0.0009 0.0012 0.0014 0.0019 0.0024 0.003 v f (in/min) 6 6 6 6 6 6 6 6 6 n (rev/min) 15920 9550 7960 5970 4770 3980 2980 2390 1910 f z (in) 0.0004 0.0006 0.0007 0.0009 0.0012 0.0014 0.0019 0.0024 0.003 v f (in/min) 17 17 17 17 17 17 17 17 17 n (rev/min) 13790 8280 6900 5170 4140 3450 2590 2070 1660 f z (in) 0.0004 0.0006 0.0007 0.0009 0.0012 0.0014 0.0019 0.0024 0.003 v f (in/min) 15 15 15 15 15 15 15 15 15 n (rev/min) f z (in) v f (in/min) n (rev/min) 6370 3820 3180 2390 1910 1590 1190 950 760 f z (in) 0.0004 0.0006 0.0007 0.0009 0.0012 0.0014 0.0019 0.0024 0.003 v f (in/min) 7 7 7 7 7 7 7 7 7 Material 192 A/D/E 1-2 A/D/E 3-4 A/D/E 5-6 a p x D c a e x D c 1.2 0.3 1.2 0.3 1.2 0.3 v c (sf/min) 540 (460-590) 490 (425-560) 410 (345-475) M/A/D 7a 48>52HRc 0.6 0.03 215 (180-245) E/A 8-9 E/A 10-11 A/D/E 12-13 A/D/E 14-15 E 16-17 E 22 1 0.3 1 0.3 1.2 0.3 1.2 0.3 1 0.3 1 0.3 330 (295-360) 215 (180-245) 625 (560-690) 540 (475-605) 1640 (490-1970) 245 (180-310) D c (inch) 1/8 3/16 1/4 5/16 3/8 1/2 5/8 3/4 1 n (rev/min) 17510 10500 8750 6570 5250 4380 3280 2630 2100 f z (in) 0.0007 0.0013 0.0015 0.002 0.0025 0.003 0.004 0.005 0.0063 v f (in/min) 39 39 39 39 39 39 39 39 39 n (rev/min) 15920 9550 7960 5970 4770 3980 2980 2390 1910 f z (in) 0.0007 0.0013 0.0015 0.002 0.0025 0.003 0.004 0.005 0.0063 v f (in/min) 36 36 36 36 36 36 36 36 36 n (rev/min) 13260 7960 6630 4970 3980 3320 2490 1990 1590 f z (in) 0.0006 0.0009 0.0011 0.0015 0.0019 0.0022 0.003 0.0037 0.0047 v f (in/min) 22 22 22 22 22 22 22 22 22 n (rev/min) 6900 4140 3450 2590 2070 1720 1290 1030 830 f z (in) 0.0014 0.0023 0.0028 0.0037 0.0046 0.0055 0.0073 0.0092 0.0114 v f (in/min) 28 28 28 28 28 28 28 28 28 n (rev/min) 10610 6370 5310 3980 3180 2650 1990 1590 1270 f z (in) 0.0006 0.0009 0.0011 0.0015 0.0019 0.0022 0.003 0.0037 0.0046 v f (in/min) 18 18 18 18 18 18 18 18 18 n (rev/min) 6900 4140 3450 2590 2070 1720 1290 1030 830 f z (in) 0.0006 0.0009 0.0011 0.0015 0.0019 0.0022 0.003 0.0037 0.0046 v f (in/min) 12 12 12 12 12 12 12 12 12 n (rev/min) 20160 12100 10080 7560 6050 5040 3780 3020 2420 f z (in) 0.0006 0.0009 0.0011 0.0015 0.0019 0.0022 0.003 0.0037 0.0046 v f (in/min) 34 34 34 34 34 34 34 34 34 n (rev/min) 17510 10500 8750 6570 5250 4380 3280 2630 2100 f z (in) 0.0006 0.0009 0.0011 0.0015 0.0019 0.0022 0.003 0.0037 0.0047 v f (in/min) 30 30 30 30 30 30 30 30 30 n (rev/min) 53050 31830 26530 19890 15920 13260 9950 7960 6370 f z (in) 0.0006 0.0011 0.0013 0.0017 0.0022 0.0026 0.0035 0.0043 0.0054 v f (in/min) 103 103 103 103 103 103 103 103 103 n (rev/min) 7960 4770 3980 2980 2390 1990 1490 1190 950 f z (in) 0.0006 0.0009 0.0011 0.0015 0.0019 0.0022 0.003 0.0037 0.0047 v f (in/min) 13 13 13 13 13 13 13 13 13 For more detailed information see pages 208, 266. E=emulsion A=air D=dry M=mist spray All cutting data are target values. 185-208 Jabro Solid 2 US G5.indd 192 2/12/2010 11:48:29 AM

Jabro-Solid 2 - JS513 Inch Tolerances: dm m = h5, D c = e8 c = D c 3/16 = +.0008, 3/16 < D c 3/8 = +.0012, 3/8 < D c 1/2 = +.0016, 1/2 < D c 5/8 = +.0020, 5/8 < D c 3/4 = +.0024, 3/4 < D c 1 = +.0028 Run-out JS512 =.0008 JS512L =.0012 JS512XL =.0012 Type JS513 D c dm m l 2 a p c x 45 5130125Z3.0-SIRON-A 1/8 1/8 1 1/2 1/4 0.001 [ 3 5130187Z3.0-SIRON-A 3/16 3/16 1 1/2 3/8 0.002 [ 3 5130250Z3.0-SIRON-A 1/4 1/4 2 1/2 0.003 [ 3 5130312Z3.0-SIRON-A 5/16 5/16 2 1/4 5/8 0.003 [ 3 5130375Z3.0-SIRON-A 3/8 3/8 2 3/4 3/4 0.004 [ 3 5130500Z3.3-SIRON-A 1/2 1/2 3 1/4 1 0.005 [ 3 5130500Z3.0-SIRON-A 1/2 1/2 3 1/4 1 0.005 [ 3 5130625Z3.3-SIRON-A 5/8 5/8 3 1/2 1 1/4 0.006 [ 3 5130625Z3.0-SIRON-A 5/8 5/8 3 1/2 1 1/4 0.006 [ 3 5130750Z3.3-SIRON-A 3/4 3/4 4 1 3/8 0.008 [ 3 5130750Z3.0-SIRON-A 3/4 3/4 4 1 3/8 0.008 [ 3 5131000Z3.3-SIRON-A 1 1 4 1 3/8 0.010 [ 3 5131000Z3.0-SIRON-A 1 1 4 1 3/8 0.010 [ 3 513L0125Z3.0-SIRON-A 1/8 1/8 2 7/16 0.001 [ 3 513L0187Z3.0-SIRON-A 3/16 3/16 2 5/8 0.002 [ 3 513L0250Z3.0-SIRON-A 1/4 1/4 3 7/8 0.003 [ 3 513L0312Z3.0-SIRON-A 5/16 5/16 3 1 0.003 [ 3 513L0375Z3.0-SIRON-A 3/8 3/8 3 1/2 1 1/4 0.004 [ 3 513L0500Z3.3-SIRON-A 1/2 1/2 4 1 1/2 0.005 [ 3 513L0500Z3.0-SIRON-A 1/2 1/2 4 1 1/2 0.005 [ 3 513L0625Z3.3-SIRON-A 5/8 5/8 4 1/2 2 1/4 0.006 [ 3 513L0625Z3.0-SIRON-A 5/8 5/8 4 1/2 2 1/4 0.006 [ 3 513L0750Z3.3-SIRON-A 3/4 3/4 5 2 3/8 0.008 [ 3 513L0750Z3.0-SIRON-A 3/4 3/4 5 2 3/8 0.008 [ 3 513L1000Z3.3-SIRON-A 1 1 5 2 3/8 0.010 [ 3 513L1000Z3.0-SIRON-A 1 1 5 2 3/8 0.010 [ 3 513XL0125Z3.0-SIRON-A 1/8 1/8 2 1/2 5/8 0.001 [ 3 513XL0187Z3.0-SIRON-A 3/16 3/16 3 1 0.002 [ 3 513XL0250Z3.0-SIRON-A 1/4 1/4 4 1 1/2 0.003 [ 3 513XL0312Z3.0-SIRON-A 5/16 5/16 4 1 1/2 0.003 [ 3 513XL0375Z3.0-SIRON-A 3/8 3/8 4 2 0.004 [ 3 513XL0500Z3.3-SIRON-A 1/2 1/2 5 2 1/2 0.005 [ 3 513XL0500Z3.0-SIRON-A 1/2 1/2 5 2 1/2 0.005 [ 3 513XL0625Z3.3-SIRON-A 5/8 5/8 5 2 3/4 0.006 [ 3 513XL0625Z3.0-SIRON-A 5/8 5/8 5 2 3/4 0.006 [ 3 513XL0750Z3.3-SIRON-A 3/4 3/4 6 3 0.008 [ 3 513XL0750Z3.0-SIRON-A 3/4 3/4 6 3 0.008 [ 3 513XL1000Z3.3-SIRON-A 1 1 6 3 0.010 [ 3 513XL1000Z3.0-SIRON-A 1 1 6 3 0.010 [ 3 Cylindrical Weldon z n ] Weldon available for cylindrical shanks (delivery time is 3 days). Add W after the when ordering: 512L100Z2.0-SIRON-AW. Picture key symbols please see page 14-15 in Solid End Mills MN2008. 193 185-208 Jabro Solid 2 US G5.indd 193 2/12/2010 11:48:30 AM

Jabro-Solid 2 JS513 Material E 1-2 E 3-4 E 5-6 a p x D c a e x D c 0.7 1 0.7 1 0.7 1 v c (sf/min) 425 (360-490) 395 (330-460) 330 (260-395) M/A/D 7a 48>52HRc 0.2 1 165 (130-195) E 8-9 E 10-11 E 12-13 E 14-15 E 16-17 E 22 0.6 1 0.5 1 0.8 1 0.7 1 260 (230-295) 165 (130-195) 490 (425-560) 425 (360-490) 0.4 1 195 (130-260) D c (mm) 1 2 3 4 5 6 8 10 12 16 20 25 n (rev/min) 41380 20690 13790 10350 8280 6900 5170 4140 3450 2590 2070 1660 f z (in) 0.0002 0.0003 0.0005 0.0006 0.0008 0.0009 0.0013 0.0016 0.0019 0.0025 0.0032 0.0039 v f (in/min) 20 20 20 20 20 20 20 20 20 20 20 20 n (rev/min) 38200 19100 12730 9550 7640 6370 4770 3820 3180 2390 1910 1530 f z (in) 0.0002 0.0003 0.0005 0.0006 0.0008 0.0009 0.0013 0.0016 0.0019 0.0025 0.0031 0.0039 v f (in/min) 18 18 18 18 18 18 18 18 18 18 18 18 n (rev/min) 31830 15920 10610 7960 6370 5310 3980 3180 2650 1990 1590 1270 f z (in) 0.0002 0.0003 0.0005 0.0006 0.0008 0.0009 0.0013 0.0016 0.0019 0.0025 0.0031 0.0039 v f (in/min) 15 15 15 15 15 15 15 15 15 15 15 15 n (rev/min) 15920 7960 5310 3980 3180 2650 1990 1590 1330 990 800 640 f z (in) 0.0001 0.0002 0.0002 0.0003 0.0004 0.0005 0.0006 0.0008 0.0009 0.0013 0.0016 0.0019 v f (in/min) 4 4 4 4 4 4 4 4 4 4 4 4 n (rev/min) 25460 12730 8490 6370 5090 4240 3180 2550 2120 1590 1270 1020 f z (in) 0.0001 0.0002 0.0004 0.0005 0.0006 0.0007 0.0009 0.0012 0.0014 0.0019 0.0024 0.003 v f (in/min) 9 9 9 9 9 9 9 9 9 9 9 9 n (rev/min) 15920 7960 5310 3980 3180 2650 1990 1590 1330 990 800 640 f z (in) 0.0001 0.0002 0.0004 0.0005 0.0006 0.0007 0.0009 0.0012 0.0014 0.0019 0.0024 0.003 v f (in/min) 6 6 6 6 6 6 6 6 6 6 6 6 n (rev/min) 47750 23870 15920 11940 9550 7960 5970 4770 3980 2980 2390 1910 f z (in) 0.0001 0.0002 0.0004 0.0005 0.0006 0.0007 0.0009 0.0012 0.0014 0.0019 0.0024 0.003 v f (in/min) 17 17 17 17 17 17 17 17 17 17 17 17 n (rev/min) 41380 20690 13790 10350 8280 6900 5170 4140 3450 2590 2070 1660 f z (in) 0.0001 0.0002 0.0004 0.0005 0.0006 0.0007 0.0009 0.0012 0.0014 0.0019 0.0024 0.003 v f (in/min) 15 15 15 15 15 15 15 15 15 15 15 15 n (rev/min) f z (in) v f (in/min) n (rev/min) 19100 9550 6370 4770 3820 3180 2390 1910 1590 1190 950 760 f z (in) 0.0001 0.0002 0.0004 0.0005 0.0006 0.0007 0.0009 0.0012 0.0014 0.0019 0.0024 0.003 v f (in/min) 7 7 7 7 7 7 7 7 7 7 7 7 Material 194 A/D/E 1-2 A/D/E 3-4 A/D/E 5-6 a p x D c a e x D c 1.2 0.3 1.2 0.3 1.2 0.3 v c (sf/min) 540 (460-590) 490 (425-560) 410 (345-475) M/A/D 7a 48>52HRc 0.6 0.03 215 (180-245) E/A 8-9 E/A 10-11 A/D/E 12-13 A/D/E 14-15 E 16-17 E 22 1 0.3 1 0.3 1.2 0.3 1.2 0.3 1 0.3 1 0.3 330 (295-360) 215 (180-245) 625 (560-690) 540 (475-605) 1640 (490-1970) 245 (180-310) D c (mm) 1 2 3 4 5 6 8 10 12 16 20 25 n (rev/min) 52520 26260 17510 13130 10500 8750 6570 5250 4380 3280 2630 2100 f z (in) 0.0002 0.0005 0.0007 0.001 0.0013 0.0015 0.002 0.0025 0.003 0.004 0.005 0.0063 v f (in/min) 39 39 39 39 39 39 39 39 39 39 39 39 n (rev/min) 47750 23870 15920 11940 9550 7960 5970 4770 3980 2980 2390 1910 f z (in) 0.0002 0.0005 0.0007 0.001 0.0013 0.0015 0.002 0.0025 0.003 0.004 0.005 0.0063 v f (in/min) 36 36 36 36 36 36 36 36 36 36 36 36 n (rev/min) 39790 19890 13260 9950 7960 6630 4970 3980 3320 2490 1990 1590 f z (in) 0.0002 0.0004 0.0006 0.0007 0.0009 0.0011 0.0015 0.0019 0.0022 0.003 0.0037 0.0047 v f (in/min) 22 22 22 22 22 22 22 22 22 22 22 22 n (rev/min) 20690 10350 6900 5170 4140 3450 2590 2070 1720 1290 1030 830 f z (in) 0.0005 0.0009 0.0014 0.0018 0.0023 0.0028 0.0037 0.0046 0.0055 0.0073 0.0092 0.0114 v f (in/min) 28 28 28 28 28 28 28 28 28 28 28 28 n (rev/min) 31830 15920 10610 7960 6370 5310 3980 3180 2650 1990 1590 1270 f z (in) 0.0002 0.0004 0.0006 0.0007 0.0009 0.0011 0.0015 0.0019 0.0022 0.003 0.0037 0.0046 v f (in/min) 18 18 18 18 18 18 18 18 18 18 18 18 n (rev/min) 20690 10350 6900 5170 4140 3450 2590 2070 1720 1290 1030 830 f z (in) 0.0002 0.0004 0.0006 0.0007 0.0009 0.0011 0.0015 0.0019 0.0022 0.003 0.0037 0.0046 v f (in/min) 12 12 12 12 12 12 12 12 12 12 12 12 n (rev/min) 60480 30240 20160 15120 12100 10080 7560 6050 5040 3780 3020 2420 f z (in) 0.0002 0.0004 0.0006 0.0007 0.0009 0.0011 0.0015 0.0019 0.0022 0.003 0.0037 0.0046 v f (in/min) 34 34 34 34 34 34 34 34 34 34 34 34 n (rev/min) 52520 26260 17510 13130 10500 8750 6570 5250 4380 3280 2630 2100 f z (in) 0.0002 0.0004 0.0006 0.0007 0.0009 0.0011 0.0015 0.0019 0.0022 0.003 0.0037 0.0047 v f (in/min) 30 30 30 30 30 30 30 30 30 30 30 30 n (rev/min) 159150 79580 53050 39790 31830 26530 19890 15920 13260 9950 7960 6370 f z (in) 0.0003 0.0004 0.0006 0.0009 0.0011 0.0013 0.0017 0.0022 0.0026 0.0035 0.0043 0.0054 v f (in/min) 10 103 103 103 103 103 103 103 103 103 103 103 n (rev/min) 23870 11940 7960 5970 4770 3980 2980 2390 1990 1490 1190 950 f z (in) 0.0002 0.0004 0.0006 0.0007 0.0009 0.0011 0.0015 0.0019 0.0022 0.003 0.0037 0.0047 v f (in/min) 13 13 13 13 13 13 13 13 13 13 13 13 For more detailed information see pages 208, 266. E=emulsion A=air D=dry M=mist spray All cutting data are target values. 185-208 Jabro Solid 2 US G5.indd 194 2/12/2010 11:48:31 AM

Jabro-Solid 2 - JS513 Metric Type A Type B Tolerances: dm m = h5, D c = e8 c = D c 3=+0.01, 3<D c 6=+0.02, 6<D c 10=+0.03, 10<D c 14=+0.04, 14<D c 18=+0.05, 18<D c 24=+0.06, 24<D c 30=+0.07 Run-out JS512 = 0.02 JS512L = 0.03 JS512XL = 0.03 Dimensions in mm Type Type D c dm m l 2 a p c x 45 z n JS513 513010Z3.0-SIRON-A A 1 3 40 2 0.010 [ 3 513015Z3.0-SIRON-A A 1.5 3 40 3 0.015 [ 3 513021Z3.0-SIRON-A A 2 3 40 4 0.020 [ 3 513020Z3.0-SIRON-A A 2 6 50 4 0.020 [ ] 3 513031Z3.0-SIRON-A B 3 3 40 6 0.030 [ 3 513030Z3.0-SIRON-A A 3 6 50 6 0.030 [ ] 3 513041Z3.0-SIRON-A B 4 4 40 8 0.040 [ 3 513040Z3.0-SIRON-A A 4 6 50 8 0.040 [ ] 3 513051Z3.0-SIRON-A B 5 5 50 10 0.050 [ 3 513050Z3.0-SIRON-A A 5 6 55 10 0.050 [ ] 3 513060Z3.0-SIRON-A B 6 6 55 12 0.060 [ ] 3 513080Z3.0-SIRON-A B 8 8 60 16 0.080 [ ] 3 513100Z3.0-SIRON-A B 10 10 70 20 0.100 [ ] 3 513120Z3.0-SIRON-A B 12 12 75 24 0.120 [ ] 3 513160Z3.0-SIRON-A B 16 16 90 30 0.160 [ ] 3 513200Z3.0-SIRON-A B 20 20 100 35 0.200 [ ] 3 513250Z3.0-SIRON-A B 25 25 110 40 0.250 [ ] 3 513L010Z3.0-SIRON-A A 1 3 40 3 0.010 [ 3 513L015Z3.0-SIRON-A A 1.5 3 40 6 0.015 [ 3 513L020Z3.0-SIRON-A A 2 6 50 7 0.020 [ ] 3 513L030Z3.0-SIRON-A A 3 6 55 10 0.030 [ ] 3 513L040Z3.0-SIRON-A A 4 6 60 14 0.040 [ ] 3 513L050Z3.0-SIRON-A A 5 6 65 18 0.050 [ ] 3 513L060Z3.0-SIRON-A B 6 6 65 20 0.060 [ ] 3 513L080Z3.0-SIRON-A B 8 8 75 28 0.080 [ ] 3 513L100Z3.0-SIRON-A B 10 10 85 35 0.100 [ ] 3 513L120Z3.0-SIRON-A B 12 12 100 42 0.120 [ ] 3 513L160Z3.0-SIRON-A B 16 16 110 50 0.160 [ ] 3 513L200Z3.0-SIRON-A B 20 20 125 60 0.200 [ ] 3 513L250Z3.0-SIRON-A B 25 25 140 70 0.250 [ ] 3 513XL020Z3.0-SIRON-A A 2 6 55 10 0.020 [ ] 3 513XL030Z3.0-SIRON-A A 3 6 60 15 0.030 [ ] 3 513XL040Z3.0-SIRON-A A 4 6 65 20 0.040 [ ] 3 513XL050Z3.0-SIRON-A A 5 6 70 25 0.050 [ ] 3 513XL060Z3.0-SIRON-A B 6 6 80 30 0.060 [ ] 3 513XL080Z3.0-SIRON-A B 8 8 85 40 0.080 [ ] 3 513XL100Z3.0-SIRON-A B 10 10 100 50 0.100 [ ] 3 513XL120Z3.0-SIRON-A B 12 12 115 60 0.120 [ ] 3 513XL160Z3.0-SIRON-A B 16 16 130 70 0.160 [ ] 3 513XL200Z3.0-SIRON-A B 20 20 150 80 0.200 [ ] 3 513XL250Z3.0-SIRON-A B 25 25 160 90 0.250 [ ] 3 ] Weldon available for cylindrical shanks (delivery time is 3 days). Add W after the when ordering: 512L100Z2.0-SIRON-AW. Picture key symbols please see page 14-15 in Solid End Mills MN2008. Cylindrical Weldon 195 185-208 Jabro Solid 2 US G5.indd 195 2/12/2010 11:48:32 AM

Jabro-Solid 2 JS514 Material 196 A/D/E 1-2 A/D/E 3-4 A/D/E 5-6 a p x D c Roughing a e x D c 1 0.3 1 0.3 1 0.3 v c (sf/min) 540 (475-605) 490 (425-560) 410 (345-475) M/A/D 7a 48>52HRc 0.6 0.03 215 (180-245) E/A 8-9 E/A 10-11 A/D/E 12-13 A/D/E 14-15 E 16-17 E 22 Material A/D/E 1-2 A/D/E 3-4 A/D/E 5-6 1 0.3 1 0.3 1 0.3 1 0.3 1 0.2 1 0.3 a p x D c Finishing a e x D c 1.5 0.03 1.5 0.03 1.5 0.03 330 (295-360) 215 (180-245) 625 (560-690) 540 (360-490) 1640 (490-1970) 245 (180-310) v c (sf/min) 590 (525-655) 540 (475-605) 460 (395-525) M/A/D 7a 48>52HRc 1.5 0.03 230 (195-260) E/A 8-9 E/A 10-11 A/D/E 12-13 A/D/E 14-15 E 16-17 E 22 1.5 0.03 1.5 0.03 1.5 0.03 1.5 0.03 1.5 0.03 1.5 0.03 360 (330-395) 230 (195-260) 690 (625-755) 590 (525-655) 1805 (490-2130) 280 (215-345) D c (inch) 1/8 3/16 1/4 5/16 3/8 12 5/8 3/4 1 n (rev/min) 17510 10500 8750 6570 5250 4380 3280 2630 2100 f z (in) 0.0011 0.0018 0.0022 0.0029 0.0036 0.0043 0.0057 0.0072 0.009 v f (in/min) 76 76 76 76 76 76 76 76 76 n (rev/min) 15920 9550 7960 5970 4770 3980 2980 2390 1910 f z (in) 0.0011 0.0018 0.0022 0.0029 0.0036 0.0043 0.0058 0.0072 0.009 v f (in/min) 69 69 69 69 69 69 69 69 69 n (rev/min) 13260 7960 6630 4970 3980 3320 2490 1990 1590 f z (in) 0.0009 0.0014 0.0017 0.0023 0.0029 0.0034 0.0046 0.0057 0.0072 v f (in/min) 46 46 46 46 46 46 46 46 46 n (rev/min) 6900 4140 3450 2590 2070 1720 1290 1030 830 f z (in) 0.0014 0.0023 0.0028 0.0037 0.0046 0.0055 0.0073 0.0092 0.0114 v f (in/min) 38 38 38 38 38 38 38 38 38 n (rev/min) 10610 6370 5310 3980 3180 2650 1990 1590 1270 f z (in) 0.0004 0.0007 0.0009 0.0011 0.0015 0.0017 0.0023 0.0029 0.0036 v f (in/min) 18 18 18 18 18 18 18 18 18 n (rev/min) 6900 4140 3450 2590 2070 1720 1290 1030 830 f z (in) 0.0004 0.0007 0.0009 0.0011 0.0014 0.0017 0.0023 0.0029 0.0035 v f (in/min) 12 12 12 12 12 12 12 12 12 n (rev/min) 20160 12100 10080 7560 6050 5040 3780 3020 2420 f z (in) 0.0006 0.0011 0.0013 0.0017 0.0022 0.0026 0.0035 0.0043 0.0054 v f (in/min) 52 52 52 52 52 52 52 52 52 n (rev/min) 17510 10500 8750 6570 5250 4380 3280 2630 2100 f z (in) 0.0006 0.0011 0.0013 0.0017 0.0022 0.0026 0.0035 0.0043 0.0054 v f (in/min) 45 45 45 45 45 45 45 45 45 n (rev/min) 53050 31830 26530 19890 15920 13260 9950 7960 6370 f z (in) 0.0011 0.0018 0.0022 0.0029 0.0036 0.0043 0.0057 0.0072 0.009 v f (in/min) 229 229 229 229 229 229 229 229 229 n (rev/min) 7960 4770 3980 2980 2390 1990 1490 1190 950 f z (in) 0.0011 0.0018 0.0022 0.0029 0.0036 0.0043 0.0058 0.0072 0.0091 v f (in/min) 34 34 34 34 34 34 34 34 34 D c (inch) 1/8 3/16 1/4 5/16 3/8 1/2 5/8 3/4 1 n (rev/min) 19100 11460 9550 7160 5730 4770 3580 2860 2290 f z (in) 0.0006 0.001 0.0012 0.0016 0.002 0.0024 0.0031 0.004 0.005 v f (in/min) 45 45 45 45 45 45 45 45 45 n (rev/min) 17510 10500 8750 6570 5250 4380 3280 2630 2100 f z (in) 0.0006 0.001 0.0012 0.0016 0.002 0.0024 0.0031 0.0039 0.0049 v f (in/min) 41 41 41 41 41 41 41 41 41 n (rev/min) 14850 8910 7430 5570 4460 3710 2790 2230 1780 f z (in) 0.0006 0.001 0.0012 0.0016 0.002 0.0024 0.0031 0.0039 0.0049 v f (in/min) 35 35 35 35 35 35 35 35 35 n (rev/min) 7430 4460 3710 2790 2230 1860 1390 1110 890 f z (in) 0.0006 0.001 0.0012 0.0016 0.002 0.0024 0.0032 0.004 0.005 v f (in/min) 18 18 18 18 18 18 18 18 18 n (rev/min) 11670 7000 5840 4380 3500 2920 2190 1750 1400 f z (in) 0.0006 0.001 0.0012 0.0016 0.002 0.0024 0.0031 0.0039 0.0049 v f (in/min) 28 28 28 28 28 28 28 28 28 n (rev/min) 7430 4460 3710 2790 2230 1860 1390 1110 890 f z (in) 0.0006 0.001 0.0012 0.0016 0.002 0.0024 0.0032 0.004 0.005 v f (in/min) 18 18 18 18 18 18 18 18 18 n (rev/min) 22280 13370 11140 8360 6680 5570 4180 3340 2670 f z (in) 0.0006 0.001 0.0012 0.0016 0.002 0.0024 0.0031 0.0039 0.0049 v f (in/min) 53 53 53 53 53 53 53 53 53 n (rev/min) 19100 11460 9550 7160 5730 4770 3580 2860 2290 f z (in) 0.0006 0.001 0.0012 0.0016 0.002 0.0024 0.0031 0.004 0.005 v f (in/min) 45 45 45 45 45 45 45 45 45 n (rev/min) 58360 35010 29180 21880 17510 14590 10940 8750 7000 f z (in) 0.0006 0.001 0.0012 0.0016 0.002 0.0024 0.0031 0.0039 0.0049 v f (in/min) 138 138 138 138 138 138 138 138 138 n (rev/min) 9020 5410 4510 3380 2710 2250 1690 1350 1080 f z (in) 0.0006 0.001 0.0012 0.0016 0.002 0.0024 0.0031 0.0039 0.0049 v f (in/min) 21 21 21 21 21 21 21 21 21 For more detailed information see pages 208, 266. E=emulsion A=air D=dry M=mist spray All cutting data are target values. 185-208 Jabro Solid 2 US G5.indd 196 2/12/2010 11:48:33 AM

Jabro-Solid 2 - JS514 Inch Tolerances: dm m = h5, D c = e8 c = D c 3/16 = +.0008, 3/16 < D c 3/8 = +.0012, 3/8 < D c 1/2 = +.0016, 1/2 < D c 5/8 = +.0020, 5/8 < D c 3/4 = +.0024, 3/4 < D c 1 = +.0028 Run-out JS512 =.0008 JS512L =.0012 JS512XL =.0012 Type JS514 D c dm m l 2 a p c x 45 5140125Z4.0-SIRON-A 1/8 1/8 1 1/2 1/4 0.001 [ 4 5140187Z4.0-SIRON-A 3/16 3/16 1 1/2 3/8 0.002 [ 4 5140250Z4.0-SIRON-A 1/4 1/4 2 1/2 0.003 [ 4 5140312Z4.0-SIRON-A 5/16 5/16 2 1/4 5/8 0.003 [ 4 5140375Z4.0-SIRON-A 3/8 3/8 2 3/4 3/4 0.004 [ 4 5140500Z4.3-SIRON-A 1/2 1/2 3 1/4 1 0.005 [ 4 5140500Z4.0-SIRON-A 1/2 1/2 3 1/4 1 0.005 [ 4 5140625Z4.3-SIRON-A 5/8 5/8 3 1/2 1 1/4 0.006 [ 4 5140625Z4.0-SIRON-A 5/8 5/8 3 1/2 1 1/4 0.006 [ 4 5140750Z4.3-SIRON-A 3/4 3/4 4 1 3/8 0.008 [ 4 5140750Z4.0-SIRON-A 3/4 3/4 4 1 3/8 0.008 [ 4 5141000Z4.3-SIRON-A 1 1 4 1 3/8 0.010 [ 4 5141000Z4.0-SIRON-A 1 1 4 1 3/8 0.010 [ 4 514L0125Z4.0-SIRON-A 1/8 1/8 2 7/16 0.001 [ 4 514L0187Z4.0-SIRON-A 3/16 3/16 2 5/8 0.002 [ 4 514L0250Z4.0-SIRON-A 1/4 1/4 3 7/8 0.003 [ 4 514L0312Z4.0-SIRON-A 5/16 5/16 3 1 0.003 [ 4 514L0375Z4.0-SIRON-A 3/8 3/8 3 1/2 1 1/4 0.004 [ 4 514L0500Z4.3-SIRON-A 1/2 1/2 4 1 1/2 0.005 [ 4 514L0500Z4.0-SIRON-A 1/2 1/2 4 1 1/2 0.005 [ 4 514L0625Z4.3-SIRON-A 5/8 5/8 4 1/2 2 1/8 0.006 [ 4 514L0625Z4.0-SIRON-A 5/8 5/8 4 1/2 2 1/8 0.006 [ 4 514L0750Z4.3-SIRON-A 3/4 3/4 5 2 1/4 0.008 [ 4 514L0750Z4.0-SIRON-A 3/4 3/4 5 2 1/4 0.008 [ 4 514L1000Z4.3-SIRON-A 1 1 5 2 1/4 0.010 [ 4 514L1000Z4.0-SIRON-A 1 1 5 2 1/4 0.010 [ 4 514XL0125Z4.0-SIRON-A 1/8 1/8 2 1/2 5/8 0.001 [ 4 514XL0187Z4.0-SIRON-A 3/16 3/16 3 1 0.002 [ 4 514XL0250Z4.0-SIRON-A 1/4 1/4 4 1 1/2 0.003 [ 4 514XL0312Z4.0-SIRON-A 5/16 5/16 4 1 1/2 0.003 [ 4 514XL0375Z4.0-SIRON-A 3/8 3/8 4 2 0.004 [ 4 514XL0500Z4.3-SIRON-A 1/2 1/2 5 2 1/2 0.005 [ 4 514XL0500Z4.0-SIRON-A 1/2 1/2 5 2 1/2 0.005 [ 4 514XL0625Z4.3-SIRON-A 5/8 5/8 5 2 1/2 0.006 [ 4 514XL0625Z4.0-SIRON-A 5/8 5/8 5 2 1/2 0.006 [ 4 514XL0750Z4.3-SIRON-A 3/4 3/4 6 3 0.008 [ 4 514XL0750Z4.0-SIRON-A 3/4 3/4 6 3 0.008 [ 4 514XL1000Z4.3-SIRON-A 1 1 6 3 0.010 [ 4 514XL1000Z4.0-SIRON-A 1 1 6 3 0.010 [ 4 Cylindrical Weldon z n ] Weldon available for cylindrical shanks (delivery time is 3 days). Add W after the when ordering: 512L100Z2.0-SIRON-AW. Picture key symbols please see page 14-15 in Solid End Mills MN2008. 197 185-208 Jabro Solid 2 US G5.indd 197 2/12/2010 11:48:34 AM

Jabro-Solid 2 JS514 Material 198 A/D/E 1-2 A/D/E 3-4 A/D/E 5-6 a p x D c Roughing a e x D c 1 0.3 1 0.3 1 0.3 v c (sf/min) 540 (475-605) 490 (425-560) 410 (345-475) M/A/D 7a 48>52HRc 0.6 0.03 215 (180-245) E/A 8-9 E/A 10-11 A/D/E 12-13 A/D/E 14-15 E 16-17 E 22 Material A/D/E 1-2 A/D/E 3-4 A/D/E 5-6 1 0.3 1 0.3 1 0.3 1 0.3 1 0.2 1 0.3 a p x D c Finishing a e x D c 1.5 0.03 1.5 0.03 1.5 0.03 330 (295-360) 215 (180-245) 625 (560-690) 540 (360-490) 1640 (490-1970) 245 (180-310) v c (sf/min) 590 (525-655) 540 (475-605) 460 (395-525) M/A/D 7a 48>52HRc 1.5 0.03 230 (195-260) E/A 8-9 E/A 10-11 A/D/E 12-13 A/D/E 14-15 E 16-17 E 22 1.5 0.03 1.5 0.03 1.5 0.03 1.5 0.03 1.5 0.03 1.5 0.03 360 (330-395) 230 (195-260) 690 (625-755) 590 (525-655) 1805 (490-2130) 280 (215-345) D c (mm) 1 2 3 4 5 6 8 10 12 16 20 25 n (rev/min) 52520 26260 17510 13130 10500 8750 6570 5250 4380 3280 2630 2100 f z (in) 0.0004 0.0007 0.0011 0.0015 0.0018 0.0022 0.0029 0.0036 0.0043 0.0057 0.0072 0.009 v f (in/min) 76 76 76 76 76 76 76 76 76 76 76 76 n (rev/min) 47750 23870 15920 11940 9550 7960 5970 4770 3980 2980 2390 1910 f z (in) 0.0004 0.0007 0.0011 0.0015 0.0018 0.0022 0.0029 0.0036 0.0043 0.0058 0.0072 0.009 v f (in/min) 69 69 69 69 69 69 69 69 69 69 69 69 n (rev/min) 39790 19890 13260 9950 7960 6630 4970 3980 3320 2490 1990 1590 f z (in) 0.0003 0.0006 0.0009 0.0011 0.0014 0.0017 0.0023 0.0029 0.0034 0.0046 0.0057 0.0072 v f (in/min) 46 46 46 46 46 46 46 46 46 46 46 46 n (rev/min) 20690 10350 6900 5170 4140 3450 2590 2070 1720 1290 1030 830 f z (in) 0.0005 0.0009 0.0014 0.0018 0.0023 0.0028 0.0037 0.0046 0.0055 0.0073 0.0092 0.0114 v f (in/min) 38 38 38 38 38 38 38 38 38 38 38 38 n (rev/min) 31830 15920 10610 7960 6370 5310 3980 3180 2650 1990 1590 1270 f z (in) 0.0002 0.0003 0.0004 0.0006 0.0007 0.0009 0.0011 0.0015 0.0017 0.0023 0.0029 0.0036 v f (in/min) 18 18 18 18 18 18 18 18 18 18 18 18 n (rev/min) 20690 10350 6900 5170 4140 3450 2590 2070 1720 1290 1030 830 f z (in) 0.0002 0.0003 0.0004 0.0006 0.0007 0.0009 0.0011 0.0014 0.0017 0.0023 0.0029 0.0035 v f (in/min) 12 12 12 12 12 12 12 12 12 12 12 12 n (rev/min) 60480 30240 20160 15120 12100 10080 7560 6050 5040 3780 3020 2420 f z (in) 0.0002 0.0004 0.0006 0.0009 0.0011 0.0013 0.0017 0.0022 0.0026 0.0035 0.0043 0.0054 v f (in/min) 52 52 52 52 52 52 52 52 52 52 52 52 n (rev/min) 52520 26260 17510 13130 10500 8750 6570 5250 4380 3280 2630 2100 f z (in) 0.0002 0.0004 0.0006 0.0009 0.0011 0.0013 0.0017 0.0022 0.0026 0.0035 0.0043 0.0054 v f (in/min) 45 45 45 45 45 45 45 45 45 45 45 45 n (rev/min) 159150 79580 53050 39790 31830 26530 19890 15920 13260 9950 7960 6370 f z (in) 0.0004 0.0007 0.0011 0.0015 0.0018 0.0022 0.0029 0.0036 0.0043 0.0057 0.0072 0.009 v f (in/min) 229 229 229 229 229 229 229 229 229 229 229 229 n (rev/min) 23870 11940 7960 5970 4770 3980 2980 2390 1990 1490 1190 950 f z (in) 0.0004 0.0007 0.0011 0.0015 0.0018 0.0022 0.0029 0.0036 0.0043 0.0058 0.0072 0.0091 v f (in/min) 34 34 34 34 34 34 34 34 34 34 34 34 D c (mm) 1 2 3 4 5 6 8 10 12 16 20 25 n (rev/min) 52520 28650 19100 14320 11460 9550 7160 5730 4770 3580 2860 2290 f z (in) 0.0002 0.0004 0.0006 0.0008 0.001 0.0012 0.0016 0.002 0.0024 0.0031 0.004 0.005 v f (in/min) 45 45 45 45 45 45 45 45 45 45 45 45 n (rev/min) 47750 26260 17510 13130 10500 8750 6570 5250 4380 3280 2630 2100 f z (in) 0.0002 0.0004 0.0006 0.0008 0.001 0.0012 0.0016 0.002 0.0024 0.0031 0.0039 0.0049 v f (in/min) 41 41 41 41 41 41 41 41 41 41 41 41 n (rev/min) 39790 22280 14850 11140 8910 7430 5570 4460 3710 2790 2230 1780 f z (in) 0.0002 0.0004 0.0006 0.0008 0.001 0.0012 0.0016 0.002 0.0024 0.0031 0.0039 0.0049 v f (in/min) 35 35 35 35 35 35 35 35 35 35 35 35 n (rev/min) 20690 11140 7430 5570 4460 3710 2790 2230 1860 1390 1110 890 f z (in) 0.0002 0.0004 0.0006 0.0008 0.001 0.0012 0.0016 0.002 0.0024 0.0032 0.004 0.005 v f (in/min) 18 18 18 18 18 18 18 18 18 18 18 18 n (rev/min) 31830 17510 11670 8750 7000 5840 4380 3500 2920 2190 1750 1400 f z (in) 0.0002 0.0004 0.0006 0.0008 0.001 0.0012 0.0016 0.002 0.0024 0.0031 0.0039 0.0049 v f (in/min) 28 28 28 28 28 28 28 28 28 28 28 28 n (rev/min) 20690 11140 7430 5570 4460 3710 2790 2230 1860 1390 1110 890 f z (in) 0.0002 0.0004 0.0006 0.0008 0.001 0.0012 0.0016 0.002 0.0024 0.0032 0.004 0.005 v f (in/min) 18 18 18 18 18 18 18 18 18 18 18 18 n (rev/min) 60480 33420 22280 16710 13370 11140 8360 6680 5570 4180 3340 2670 f z (in) 0.0002 0.0004 0.0006 0.0008 0.001 0.0012 0.0016 0.002 0.0024 0.0031 0.0039 0.0049 v f (in/min) 53 53 53 53 53 53 53 53 53 53 53 53 n (rev/min) 52520 28650 19100 14320 11460 9550 7160 5730 4770 3580 2860 2290 f z (in) 0.0002 0.0004 0.0006 0.0008 0.001 0.0012 0.0016 0.002 0.0024 0.0031 0.004 0.005 v f (in/min) 45 45 45 45 45 45 45 45 45 45 45 45 n (rev/min) 175070 87450 58360 43770 35010 29180 21880 17510 14590 10940 8750 7000 f z (in) 0.0002 0.0004 0.0006 0.0008 0.001 0.0012 0.0016 0.002 0.0024 0.0031 0.0039 0.0049 v f (in/min) 138 138 138 138 138 138 138 138 138 138 138 138 n (rev/min) 23870 13530 9020 6760 5410 4510 3380 2710 2250 1690 1350 1080 f z (in) 0.0002 0.0004 0.0006 0.0008 0.001 0.0012 0.0016 0.002 0.0024 0.0031 0.0039 0.0049 v f (in/min) 21 21 21 21 21 21 21 21 21 21 21 21 For more detailed information see pages 208, 266. E=emulsion A=air D=dry M=mist spray All cutting data are target values. 185-208 Jabro Solid 2 US G5.indd 198 2/12/2010 11:48:35 AM

Jabro-Solid 2 - JS514 Metric Type A Type B Tolerances: dm m = h5, D c = e8 c = D c 3=+0.01, 3<D c 6=+0.02, 6<D c 10=+0.03, 10<D c 14=+0.04, 14<D c 18=+0.05, 18<D c 24=+0.06, 24<D c 30=+0.07 Run-out JS512 = 0.02 JS512L = 0.03 JS512XL = 0.03 Dimensions in mm Type Type D c dm m l 2 a p c x 45 z n JS514 514010Z4.0-SIRON-A A 1 3 40 2 0.010 [ 4 514015Z4.0-SIRON-A A 1.5 3 40 3 0.015 [ 4 514021Z4.0-SIRON-A A 2 3 40 5 0.020 [ 4 514020Z4.0-SIRON-A A 2 6 50 5 0.020 [ ] 4 514031Z4.0-SIRON-A B 3 3 40 7 0.030 [ 4 514030Z4.0-SIRON-A A 3 6 50 7 0.030 [ ] 4 514041Z4.0-SIRON-A B 4 4 40 10 0.040 [ 4 514040Z4.0-SIRON-A A 4 6 55 10 0.040 [ ] 4 514051Z4.0-SIRON-A B 5 5 50 12 0.050 [ 4 514050Z4.0-SIRON-A A 5 6 55 12 0.050 [ ] 4 514060Z4.0-SIRON-A B 6 6 55 13 0.060 [ ] 4 514080Z4.0-SIRON-A B 8 8 60 18 0.080 [ ] 4 514100Z4.0-SIRON-A B 10 10 70 22 0.100 [ ] 4 514120Z4.0-SIRON-A B 12 12 80 26 0.120 [ ] 4 514160Z4.0-SIRON-A B 16 16 90 32 0.160 [ ] 4 514200Z4.0-SIRON-A B 20 20 100 40 0.200 [ ] 4 514250Z4.0-SIRON-A B 25 25 125 50 0.250 [ ] 4 514L010Z4.0-SIRON-A A 1 3 40 3 0.010 [ 4 514L015Z4.0-SIRON-A A 1.5 3 40 6 0.015 [ 4 514L020Z4.0-SIRON-A A 2 6 50 8 0.020 [ ] 4 514L030Z4.0-SIRON-A A 3 6 55 12 0.030 [ ] 4 514L040Z4.0-SIRON-A A 4 6 60 16 0.040 [ ] 4 514L050Z4.0-SIRON-A A 5 6 65 21 0.050 [ ] 4 514L060Z4.0-SIRON-A B 6 6 65 23 0.060 [ ] 4 514L080Z4.0-SIRON-A B 8 8 75 32 0.080 [ ] 4 514L100Z4.0-SIRON-A B 10 10 90 40 0.100 [ ] 4 514L120Z4.0-SIRON-A B 12 12 100 45 0.120 [ ] 4 514L160Z4.0-SIRON-A B 16 16 125 55 0.160 [ ] 4 514L200Z4.0-SIRON-A B 20 20 125 65 0.200 [ ] 4 514L250Z4.0-SIRON-A B 25 25 160 80 0.250 [ ] 4 514XL020Z4.0-SIRON-A A 2 6 55 10 0.020 [ ] 4 514XL030Z4.0-SIRON-A A 3 6 60 17 0.030 [ ] 4 514XL040Z4.0-SIRON-A A 4 6 70 25 0.040 [ ] 4 514XL050Z4.0-SIRON-A A 5 6 70 28 0.050 [ ] 4 514XL060Z4.0-SIRON-A B 6 6 80 35 0.060 [ ] 4 514XL080Z4.0-SIRON-A B 8 8 90 45 0.080 [ ] 4 514XL100Z4.0-SIRON-A B 10 10 110 55 0.100 [ ] 4 514XL120Z4.0-SIRON-A B 12 12 125 65 0.120 [ ] 4 514XL160Z4.0-SIRON-A B 16 16 150 80 0.160 [ ] 4 514XL200Z4.0-SIRON-A B 20 20 150 90 0.200 [ ] 4 514XL250Z4.0-SIRON-A B 25 25 180 110 0.250 [ ] 4 ] Weldon available for cylindrical shanks (delivery time is 3 days). Add W after the when ordering: 512L100Z2.0-SIRON-AW. Picture key symbols please see page 14-15 in Solid End Mills MN2008. Cylindrical Weldon 199 185-208 Jabro Solid 2 US G5.indd 199 2/12/2010 11:48:36 AM

Jabro-Solid 2 JS553 Material 200 E 1-2 E 3-4 E 5-6 a p x D c a e x D c 1 1 1 1 0.8 1 v c (sf/min) 490 (425-560) 460 (395-525) 395 (330-460) M/A/D 7a 48>52HRc 0.4 1 165 (130-195) E 8-9 E 10-11 E 12-13 E 14-15 E 16-17 E 22 Material A/D/E 1-2 A/D/E 3-4 A/D/E 5-6 0.8 1 0.6 1 1 1 0.8 1 0.6 1 0.5 1 a p x D c a e x D c 1 0.4 1 0.4 1 0.4 260 (230-295) 180 (130-195) 525 (460-590) 460 (395-525) 1970 (490-2295) 230 (165-295) v c (sf/min) 625 (560-690) 575 (510-640) 490 (425-560) M/A/D 7a 48>52HRc 0.8 0.2 215 (180-245) E/A 8-9 E/A 10-11 A/D/E 12-13 A/D/E 14-15 E 16-17 E 22 1 0.4 1 0.4 1 0.4 1 0.4 1 0.5 1 0.4 330 (295-360) 215 (180-245) 655 (590-720) 575 (510-640) 2460 (490-2790) 295 (230-360) D c (inch) 1/8 3/16 1/4 5/16 3/8 1/2 5/8 3/4 1 n (rev/min) 15920 9550 7960 5970 4770 3980 2980 2390 1910 f z (in) 0.0008 0.0013 0.0016 0.0021 0.0027 0.0032 0.0043 0.0053 0.0067 v f (in/min) 38 38 38 38 38 38 38 38 38 n (rev/min) 14580 8910 7430 5570 4460 3710 2790 2230 1780 f z (in) 0.0008 0.0013 0.0016 0.0021 0.0027 0.0032 0.0043 0.0054 0.0067 v f (in/min) 36 36 36 36 36 36 36 36 36 n (rev/min) 12730 7640 6370 4770 3820 3180 2390 1910 1530 f z (in) 0.0007 0.0012 0.0014 0.0019 0.0024 0.0028 0.0038 0.0047 0.0059 v f (in/min) 27 27 27 27 27 27 27 27 27 n (rev/min) 5310 3180 2650 1990 1590 1330 990 800 640 f z (in) 0.0003 0.0005 0.0006 0.0007 0.0009 0.0011 0.0015 0.0019 0.0024 v f (in/min) 5 5 5 5 5 5 5 5 5 n (rev/min) 8940 5090 4240 3180 2550 2120 1590 1270 1020 f z (in) 0.0006 0.0009 0.0011 0.0015 0.0019 0.0023 0.0031 0.0038 0.0048 v f (in/min) 15 15 15 15 15 15 15 15 15 n (rev/min) 5840 3500 2920 2190 1750 1460 1090 880 700 f z (in) 0.0004 0.0007 0.0009 0.0011 0.0014 0.0017 0.0023 0.0028 0.0035 v f (in/min) 7 7 7 7 7 7 7 7 7 n (rev/min) 16980 10190 8490 6370 5090 4240 3180 2550 2040 f z (in) 0.0007 0.0012 0.0014 0.0019 0.0024 0.0028 0.0038 0.0047 0.0059 v f (in/min) 36 36 36 36 36 36 36 36 36 n (rev/min) 14580 8910 7430 5570 4460 3710 2790 2230 1780 f z (in) 0.0007 0.0012 0.0014 0.0019 0.0024 0.0028 0.0038 0.0047 0.0059 v f (in/min) 32 32 32 32 32 32 32 32 32 n (rev/min) 63660 38200 31830 23870 19100 15920 11940 9550 7640 f z (in) 0.0008 0.0014 0.0017 0.0022 0.0028 0.0033 0.0044 0.0055 0.0069 v f (in/min) 157 157 157 157 157 157 157 157 157 n (rev/min) 7430 4460 3710 2790 2230 1860 1390 1110 890 f z (in) 0.0006 0.0009 0.0011 0.0015 0.0019 0.0022 0.003 0.0038 0.0047 v f (in/min) 13 13 13 13 13 13 13 13 13 D c (inch) 1/8 3/16 1/4 5/16 3/8 1/2 5/8 3/4 1 n (rev/min) 20160 12100 10080 7560 6050 5040 3780 3020 2420 f z (in) 0.0011 0.0019 0.0022 0.003 0.0037 0.0045 0.006 0.0075 0.0094 v f (in/min) 68 68 68 68 68 68 68 68 68 n (rev/min) 18540 11140 9280 6960 5570 4640 3480 2790 2230 f z (in) 0.0011 0.0019 0.0022 0.003 0.0037 0.0045 0.006 0.0075 0.0094 v f (in/min) 63 63 63 63 63 63 63 63 63 n (rev/min) 15920 9550 7960 5970 4770 3980 2980 2390 1910 f z (in) 0.0011 0.0019 0.0022 0.003 0.0037 0.0044 0.0059 0.0074 0.0092 v f (in/min) 53 53 53 53 53 53 53 53 53 n (rev/min) 6900 4140 3450 2590 2070 1720 1290 1030 830 f z (in) 0.0006 0.0011 0.0013 0.0017 0.0021 0.0026 0.0034 0.0043 0.0053 v f (in/min) 13 13 13 13 13 13 13 13 13 n (rev/min) 10610 6370 5310 3980 3180 2650 1990 1590 1270 f z (in) 0.0009 0.0015 0.0018 0.0024 0.003 0.0036 0.0048 0.006 0.0075 v f (in/min) 29 29 29 29 29 29 29 29 29 n (rev/min) 6900 4140 3450 2590 2070 1720 1290 1030 830 f z (in) 0.0007 0.0011 0.0013 0.0018 0.0022 0.0027 0.0036 0.0045 0.0056 v f (in/min) 14 14 14 14 14 14 14 14 14 n (rev/min) 21220 12730 10610 7960 6370 5310 3980 3180 2550 f z (in) 0.0011 0.0019 0.0022 0.003 0.0037 0.0045 0.006 0.0075 0.0094 v f (in/min) 72 72 72 72 72 72 72 72 72 n (rev/min) 18570 11140 9280 6960 5570 4640 3480 2790 2230 f z (in) 0.0011 0.0019 0.0022 0.003 0.0037 0.0045 0.006 0.0075 0.0094 v f (in/min) 63 63 63 63 63 63 63 63 63 n (rev/min) 79580 47750 39790 29840 23870 19890 14920 11940 9550 f z (in) 0.0013 0.0022 0.0026 0.0035 0.0044 0.0053 0.007 0.0088 0.011 v f (in/min) 315 315 315 315 315 315 315 315 315 n (rev/min) 9550 5730 4770 3580 2860 2390 1790 1430 1150 f z (in) 0.0009 0.0015 0.0018 0.0024 0.003 0.0036 0.0048 0.006 0.0074 v f (in/min) 26 26 26 26 26 26 26 26 26 For more detailed information see pages 208, 266. E=emulsion A=air D=dry M=mist spray All cutting data are target values. 185-208 Jabro Solid 2 US G5.indd 200 2/12/2010 11:48:37 AM

Jabro-Solid 2 - JS553 Inch Tolerances: dm m = h5, D c = e8, r ³1 = +/-.0008 c = D c 3/16 = +.0008, 3/16 < D c 3/8 = +.0012, 3/8 < D c 1/2 = +.0016, 1/2 < D c 5/8 = +.0020, 5/8 < D c 3/4 = +.0024, 3/4 < D c 1 = +.0028 Run-out JS512 =.0004 JS512L =.0004 JS512XL =.0004 Type JS553 D c dm m l 2 a p r e1 c x 45 5530125Z3.0-SIRON-A 1/8 1/8 2 1/4 0.0015 [ 3 5530187Z3.0-SIRON-A 3/16 3/16 2 3/8 0.0015 [ 3 5530250Z3.0-SIRON-A 1/4 1/4 2 1/2 1/2 0.003 [ 3 5530250R015Z3.0-SIRON-A 1/4 1/4 2 1/2 1/2 0.015 [ 3 5530312Z3.0-SIRON-A 5/16 5/16 2 1/2 5/8 0.004 [ 3 5530312R015Z3.0-SIRON-A 5/16 5/16 2 1/2 5/8 0.015 [ 3 5530375Z3.0-SIRON-A 3/8 3/8 3 3/4 0.005 [ 3 5530375R015Z3.0-SIRON-A 3/8 3/8 3 3/4 0.015 [ 3 5530375R030Z3.0-SIRON-A 3/8 3/8 3 3/4 0.030 [ 3 5530500Z3.3-SIRON-A 1/2 1/2 3 1/2 1 0.006 [ 3 5530500Z3.0-SIRON-A 1/2 1/2 3 1/2 1 0.006 [ 3 5530500R015Z3.3-SIRON-A 1/2 1/2 3 1/2 1 0.015 [ 3 5530500R015Z3.0-SIRON-A 1/2 1/2 3 1/2 1 0.015 [ 3 5530500R030Z3.3-SIRON-A 1/2 1/2 3 1/2 1 0.030 [ 3 5530500R030Z3.0-SIRON-A 1/2 1/2 3 1/2 1 0.030 [ 3 5530625Z3.3-SIRON-A 5/8 5/8 3 3/4 1 1/4 0.008 [ 3 5530625Z3.0-SIRON-A 5/8 5/8 3 3/4 1 1/4 0.008 [ 3 5530625R030Z3.3-SIRON-A 5/8 5/8 3 3/4 1 1/4 0.030 [ 3 5530625R030Z3.0-SIRON-A 5/8 5/8 3 3/4 1 1/4 0.030 [ 3 5530625R060Z3.3-SIRON-A 5/8 5/8 3 3/4 1 1/4 0.060 [ 3 5530625R060Z3.0-SIRON-A 5/8 5/8 3 3/4 1 1/4 0.060 [ 3 5530750Z3.3-SIRON-A 3/4 3/4 4 1 1/2 0.010 [ 3 5530750Z3.0-SIRON-A 3/4 3/4 4 1 1/2 0.010 [ 3 5530750R030Z3.3-SIRON-A 3/4 3/4 4 1 1/2 0.030 [ 3 5530750R030Z3.0-SIRON-A 3/4 3/4 4 1 1/2 0.030 [ 3 5530750R060Z3.3-SIRON-A 3/4 3/4 4 1 1/2 0.060 [ 3 5530750R060Z3.0-SIRON-A 3/4 3/4 4 1 1/2 0.060 [ 3 5531000Z3.3-SIRON-A 1 1 5 2 0.012 [ 3 5531000Z3.0-SIRON-A 1 1 5 2 0.012 [ 3 5531000R030Z3.3-SIRON-A 1 1 5 2 0.030 [ 3 5531000R030Z3.0-SIRON-A 1 1 5 2 0.030 [ 3 5531000R060Z3.3-SIRON-A 1 1 5 2 0.060 [ 3 5531000R060Z3.0-SIRON-A 1 1 5 2 0.060 [ 3 Cylindrical Weldon z n ] Weldon available for cylindrical shanks (delivery time is 3 days). Add W after the when ordering: 512L100Z2.0-SIRON-AW. Picture key symbols please see page 14-15 in Solid End Mills MN2008. 201 185-208 Jabro Solid 2 US G5.indd 201 2/12/2010 11:48:38 AM

Jabro-Solid 2 JS553 Material 202 E 1-2 E 3-4 E 5-6 a p x D c a e x D c 1 1 1 1 0.8 1 v c (sf/min) 490 (425-560) 460 (395-525) 395 (330-460) M/A/D 7a 48>52HRc 0.4 1 165 (130-195) E 8-9 E 10-11 E 12-13 E 14-15 E 16-17 E 22 Material A/D/E 1-2 A/D/E 3-4 A/D/E 5-6 0.8 1 0.6 1 1 1 0.8 1 0.6 1 0.5 1 a p x D c a e x D c 1 0.4 1 0.4 1 0.4 260 (230-295) 180 (130-195) 525 (460-590) 460 (395-525) 1970 (490-2295) 230 (165-295) v c (sf/min) 625 (560-690) 575 (510-640) 490 (425-560) M/A/D 7a 48>52HRc 0.8 0.2 215 (180-245) E/A 8-9 E/A 10-11 A/D/E 12-13 A/D/E 14-15 E 16-17 E 22 1 0.4 1 0.4 1 0.4 1 0.4 1 0.5 1 0.4 330 (295-360) 215 (180-245) 655 (590-720) 575 (510-640) 2460 (490-2790) 295 (230-360) D c (mm) 2 3 4 5 6 8 10 12 16 20 25 n (rev/min) 23870 15920 11940 9550 7960 5970 4770 3980 2980 2390 1910 f z (in) 0.0006 0.0008 0.0011 0.0013 0.0016 0.0021 0.0027 0.0032 0.0043 0.0053 0.0067 v f (in/min) 38 38 38 38 38 38 38 38 38 38 38 n (rev/min) 22280 14580 11140 8910 7430 5570 4460 3710 2790 2230 1780 f z (in) 0.0006 0.0008 0.0011 0.0013 0.0016 0.0021 0.0027 0.0032 0.0043 0.0054 0.0067 v f (in/min) 36 36 36 36 36 36 36 36 36 36 36 n (rev/min) 19100 12730 9550 7640 6370 4770 3820 3180 2390 1910 1530 f z (in) 0.0005 0.0007 0.0009 0.0012 0.0014 0.0019 0.0024 0.0028 0.0038 0.0047 0.0059 v f (in/min) 27 27 27 27 27 27 27 27 27 27 27 n (rev/min) 7960 5310 3980 3180 2650 1990 1590 1330 990 800 640 f z (in) 0.0002 0.0003 0.0004 0.0005 0.0006 0.0007 0.0009 0.0011 0.0015 0.0019 0.0024 v f (in/min) 5 5 5 5 5 5 5 5 5 5 5 n (rev/min) 12730 8940 6370 5090 4240 3180 2550 2120 1590 1270 1020 f z (in) 0.0004 0.0006 0.0007 0.0009 0.0011 0.0015 0.0019 0.0023 0.0031 0.0038 0.0048 v f (in/min) 15 15 15 15 15 15 15 15 15 15 15 n (rev/min) 8750 5840 4380 3500 2920 2190 1750 1460 1090 880 700 f z (in) 0.0003 0.0004 0.0006 0.0007 0.0009 0.0011 0.0014 0.0017 0.0023 0.0028 0.0035 v f (in/min) 7 7 7 7 7 7 7 7 7 7 7 n (rev/min) 25460 16980 12730 10190 8490 6370 5090 4240 3180 2550 2040 f z (in) 0.0005 0.0007 0.0009 0.0012 0.0014 0.0019 0.0024 0.0028 0.0038 0.0047 0.0059 v f (in/min) 36 36 36 36 36 36 36 36 36 36 36 n (rev/min) 22280 14580 11140 8910 7430 5570 4460 3710 2790 2230 1780 f z (in) 0.0005 0.0007 0.0009 0.0012 0.0014 0.0019 0.0024 0.0028 0.0038 0.0047 0.0059 v f (in/min) 32 32 32 32 32 32 32 32 32 32 32 n (rev/min) 95490 63660 47750 38200 31830 23870 19100 15920 11940 9550 7640 f z (in) 0.0006 0.0008 0.0011 0.0014 0.0017 0.0022 0.0028 0.0033 0.0044 0.0055 0.0069 v f (in/min) 157 157 157 157 157 157 157 157 157 157 157 n (rev/min) 11140 7430 5570 4460 3710 2790 2230 1860 1390 1110 890 f z (in) 0.0004 0.0006 0.0007 0.0009 0.0011 0.0015 0.0019 0.0022 0.003 0.0038 0.0047 v f (in/min) 13 13 13 13 13 13 13 13 13 13 13 D c (mm) 2 3 4 5 6 8 10 12 16 20 25 n (rev/min) 30240 20160 15120 12100 10080 7560 6050 5040 3780 3020 2420 f z (in) 0.0007 0.0011 0.0015 0.0019 0.0022 0.003 0.0037 0.0045 0.006 0.0075 0.0094 v f (in/min) 68 68 68 68 68 68 68 68 68 68 68 n (rev/min) 27850 18540 13930 11140 9280 6960 5570 4640 3480 2790 2230 f z (in) 0.0007 0.0011 0.0015 0.0019 0.0022 0.003 0.0037 0.0045 0.006 0.0075 0.0094 v f (in/min) 63 63 63 63 63 63 63 63 63 63 63 n (rev/min) 23870 15920 11940 9550 7960 5970 4770 3980 2980 2390 1910 f z (in) 0.0007 0.0011 0.0015 0.0019 0.0022 0.003 0.0037 0.0044 0.0059 0.0074 0.0092 v f (in/min) 53 53 53 53 53 53 53 53 53 53 53 n (rev/min) 10350 6900 5170 4140 3450 2590 2070 1720 1290 1030 830 f z (in) 0.0004 0.0006 0.0009 0.0011 0.0013 0.0017 0.0021 0.0026 0.0034 0.0043 0.0053 v f (in/min) 13 13 13 13 13 13 13 13 13 13 13 n (rev/min) 15920 10610 7960 6370 5310 3980 3180 2650 1990 1590 1270 f z (in) 0.0006 0.0009 0.0012 0.0015 0.0018 0.0024 0.003 0.0036 0.0048 0.006 0.0075 v f (in/min) 29 29 29 29 29 29 29 29 29 29 29 n (rev/min) 10350 6900 5170 4140 3450 2590 2070 1720 1290 1030 830 f z (in) 0.0004 0.0007 0.0009 0.0011 0.0013 0.0018 0.0022 0.0027 0.0036 0.0045 0.0056 v f (in/min) 14 14 14 14 14 14 14 14 14 14 14 n (rev/min) 31830 21220 15920 12730 10610 7960 6370 5310 3980 3180 2550 f z (in) 0.0007 0.0011 0.0015 0.0019 0.0022 0.003 0.0037 0.0045 0.006 0.0075 0.0094 v f (in/min) 72 72 72 72 72 72 72 72 72 72 72 n (rev/min) 27850 18570 13930 11140 9280 6960 5570 4640 3480 2790 2230 f z (in) 0.0007 0.0011 0.0015 0.0019 0.0022 0.003 0.0037 0.0045 0.006 0.0075 0.0094 v f (in/min) 63 63 63 63 63 63 63 63 63 63 63 n (rev/min) 119370 79580 59680 47750 39790 29840 23870 19890 14920 11940 9550 f z (in) 0.0009 0.0013 0.0018 0.0022 0.0026 0.0035 0.0044 0.0053 0.007 0.0088 0.011 v f (in/min) 315 315 315 315 315 315 315 315 315 315 315 n (rev/min) 14320 9550 7160 5730 4770 3580 2860 2390 1790 1430 1150 f z (in) 0.0006 0.0009 0.0012 0.0015 0.0018 0.0024 0.003 0.0036 0.0048 0.006 0.0074 v f (in/min) 26 26 26 26 26 26 26 26 26 26 26 For more detailed information see pages 208, 266. E=emulsion A=air D=dry M=mist spray All cutting data are target values. 185-208 Jabro Solid 2 US G5.indd 202 2/12/2010 11:48:39 AM

Jabro-Solid 2 - JS553 Metric Type A Type B Tolerances: dm m = h5, D c = e7, r ³1 = +/-0.02 c = D c 3=+0.01, 3<D c 6=+0.02, 6<D c 10=+0.03, 10<D c 14=+0.04, 14<D c 18=+0.05, 18<D c 24=+0.06, 24<D c 30=+0.07 Run-out JS512 = 0.01 JS512L = 0.01 JS512XL = 0.01 Dimensions in mm Type Type D c dm m l 2 a p r e1 c x 45 z n JS553 553020Z3.0-SIRON-A A 2 6 50 5 0.025 [ ] 3 553025Z3.0-SIRON-A A 2.5 6 50 7 0.025 [ ] 3 553030Z3.0-SIRON-A A 3 6 50 7 0.035 [ ] 3 553035Z3.0-SIRON-A A 3.5 6 55 9 0.035 [ ] 3 553040Z3.0-SIRON-A A 4 6 55 10 0.045 [ ] 3 553045Z3.0-SIRON-A A 4.5 6 55 12 0.045 [ ] 3 553050Z3.0-SIRON-A A 5 6 55 12 0.055 [ ] 3 553050R020Z3.0-SIRON-A A 5 6 55 12 0.2 [ ] 3 553055Z3.0-SIRON-A A 5.5 6 55 14 0.055 [ ] 3 553060Z3.3-SIRON-A B 6 6 55 14 0.075 [ 3 553060Z3.0-SIRON-A B 6 6 55 14 0.075 [ 3 553060R020Z3.0-SIRON-A B 6 6 55 14 0.2 [ ] 3 553080Z3.3-SIRON-A B 8 8 60 18 0.100 [ 3 553080Z3.0-SIRON-A B 8 8 60 18 0.100 [ 3 553080R050Z3.0-SIRON-A B 8 8 60 18 0.5 [ ] 3 553100Z3.3-SIRON-A B 10 10 70 22 0.125 [ 3 553100Z3.0-SIRON-A B 10 10 70 22 0.125 [ 3 553100R050Z3.0-SIRON-A B 10 10 70 22 0.5 [ ] 3 553100R100Z3.0-SIRON-A B 10 10 70 22 1 [ ] 3 553120Z3.3-SIRON-A B 12 12 80 26 0.150 [ 3 553120Z3.0-SIRON-A B 12 12 80 26 0.150 [ 3 553120R050Z3.0-SIRON-A B 12 12 80 26 0.5 [ ] 3 553120R100Z3.0-SIRON-A B 12 12 80 26 1 [ ] 3 553160Z3.3-SIRON-A B 16 16 90 34 0.200 [ 3 553160Z3.0-SIRON-A B 16 16 90 34 0.200 [ 3 553160R050Z3.0-SIRON-A B 16 16 90 34 0.5 [ ] 3 553160R100Z3.0-SIRON-A B 16 16 90 34 1 [ ] 3 553200Z3.3-SIRON-A B 20 20 110 42 0.250 [ 3 553200Z3.0-SIRON-A B 20 20 110 42 0.250 [ 3 553200R050Z3.0-SIRON-A B 20 20 110 42 0.5 [ ] 3 553200R100Z3.0-SIRON-A B 20 20 110 42 1 [ ] 3 553250Z3.3-SIRON-A B 25 25 125 52 0.300 [ 3 553250Z3.0-SIRON-A B 25 25 125 52 0.300 [ 3 553250R050Z3.0-SIRON-A B 25 25 125 52 0.5 [ ] 3 553250R100Z3.0-SIRON-A B 25 25 125 52 1 [ ] 3 Cylindrical Weldon ] Weldon available for cylindrical shanks (delivery time is 3 days). Add W after the when ordering: 512L100Z2.0-SIRON-AW. Picture key symbols please see page 14-15 in Solid End Mills MN2008. 203 185-208 Jabro Solid 2 US G5.indd 203 2/12/2010 11:48:40 AM

Jabro-Solid 2 JS554 Material E 1-2 E 3-4 E 5-6 a p x D c a e x D c 1 1 1 1 0.8 1 v c (sf/min) 490 (425-560) 460 (395-525) 395 (330-460) M/A/D 7a 48>52HRc 0.4 1 165 (130-195) E 8-9 E 10-11 E 12-13 E 14-15 E 16-17 E 22 0.8 1 0.6 1 1 1 0.8 1 260 (230-295) 165 (130-195) 525 (460-590) 460 (395-525) 0.5 1 230 (165-295) D c (inch) 1/4 5/16 3/8 1/2 5/8 3/4 1 n (rev/min) 7960 5970 4770 3980 2980 2390 1910 f z (in) 0.0014 0.0019 0.0024 0.0028 0.0038 0.0047 0.0059 v f (in/min) 45 45 45 45 45 45 45 n (rev/min) 7430 5570 4460 3710 2790 2230 1780 f z (in) 0.0014 0.0019 0.0024 0.0028 0.0038 0.0047 0.0059 v f (in/min) 42 42 42 42 42 42 42 n (rev/min) 6370 4770 3820 3180 2390 1910 1530 f z (in) 0.0012 0.0016 0.002 0.0024 0.0032 0.004 0.005 v f (in/min) 30 30 30 30 30 30 30 n (rev/min) 2650 1990 1590 1330 990 800 640 f z (in) 0.0005 0.0006 0.0008 0.0009 0.0013 0.0016 0.002 v f (in/min) 5 5 5 5 5 5 5 n (rev/min) 4240 3180 2550 2120 1590 1270 1020 f z (in) 0.0009 0.0013 0.0016 0.0019 0.0025 0.0032 0.0039 v f (in/min) 16 16 16 16 16 16 16 n (rev/min) 2650 1990 1590 1330 990 800 640 f z (in) 0.0007 0.0009 0.0012 0.0014 0.0019 0.0023 0.0029 v f (in/min) 7 7 7 7 7 7 7 n (rev/min) 8490 6370 5090 4240 3180 2550 2040 f z (in) 0.0012 0.0016 0.002 0.0024 0.0031 0.0039 0.0049 v f (in/min) 40 40 40 40 40 40 40 n (rev/min) 7430 5570 4460 3710 2790 2230 1780 f z (in) 0.0012 0.0016 0.002 0.0024 0.0031 0.0039 0.0049 v f (in/min) 35 35 35 35 35 35 35 n (rev/min) f z (in) v f (in/min) n (rev/min) 3710 2790 2230 1860 1390 1110 890 f z (in) 0.0009 0.0013 0.0016 0.0019 0.0026 0.0032 0.004 v f (in/min) 14 14 14 14 14 14 14 Material 204 A/D/E 1-2 A/D/E 3-4 A/D/E 5-6 a p x D c a e x D c 1 0.4 1 0.4 1 0.4 v c (sf/min) 625 (560-690) 575 (510-640) 490 (425-560) M/A/D 7a 48>52HRc 0.8 0.2 215 (180-245) E/A 8-9 E/A 10-11 A/D/E 12-13 A/D/E 14-15 E 16-17 E 22 1 0.4 1 0.4 1 0.4 1 0.4 1 0.5 1 0.4 330 (295-360) 215 (180-245) 655 (590-720) 575 (510-640) 2460 (490-2790) 295 (230-360) D c (inch) 1/4 5/16 3/8 1/2 5/8 3/4 1 n (rev/min) 10080 7560 6050 5040 3780 3020 2420 f z (in) 0.0022 0.003 0.0037 0.0045 0.0059 0.0075 0.0093 v f (in/min) 90 90 90 90 90 90 90 n (rev/min) 9280 6960 5570 4640 3480 2790 2230 f z (in) 0.0022 0.003 0.0037 0.0045 0.006 0.0075 0.0094 v f (in/min) 83 83 83 83 83 83 83 n (rev/min) 7960 5970 4770 3980 2980 2390 1910 f z (in) 0.0019 0.0025 0.0031 0.0037 0.005 0.0062 0.0078 v f (in/min) 59 59 59 59 59 59 59 n (rev/min) 3450 2590 2070 1720 1290 1030 830 f z (in) 0.0011 0.0014 0.0018 0.0021 0.0028 0.0035 0.0004 v f (in/min) 15 15 15 15 15 15 15 n (rev/min) 5310 3980 3180 2650 1990 1590 1270 f z (in) 0.0015 0.002 0.0025 0.003 0.004 0.005 0.0062 v f (in/min) 32 32 32 32 32 32 32 n (rev/min) 3450 2590 2070 1720 1290 1030 830 f z (in) 0.0011 0.0015 0.0019 0.0022 0.003 0.0038 0.0047 v f (in/min) 16 16 16 16 16 16 16 n (rev/min) 10610 7960 6370 5310 3980 3180 2550 f z (in) 0.0019 0.0025 0.0031 0.0037 0.005 0.0062 0.0078 v f (in/min) 79 79 79 79 79 79 79 n (rev/min) 9280 6960 5570 4640 3480 2790 2230 f z (in) 0.0019 0.0025 0.0031 0.0037 0.005 0.0062 0.0078 v f (in/min) 69 69 69 69 69 69 69 n (rev/min) 39790 29840 23870 19890 14920 11940 9550 f z (in) 0.0022 0.003 0.0037 0.0045 0.006 0.0075 0.0093 v f (in/min) 357 357 357 357 357 357 357 n (rev/min) 4770 3580 2860 2390 1790 1430 1150 f z (in) 0.0015 0.002 0.0025 0.003 0.004 0.005 0.0062 v f (in/min) 29 29 29 29 29 29 29 For more detailed information see pages 208, 266. E=emulsion A=air D=dry M=mist spray All cutting data are target values. 185-208 Jabro Solid 2 US G5.indd 204 2/12/2010 11:48:41 AM

Jabro-Solid 2 - JS554 Inch Tolerances: dm m = h5, D c = e8, r ³1 = +/-.0008 c = D c 3/16 = +.0008, 3/16 < D c 3/8 = +.0012, 3/8 < D c 1/2 = +.0016, 1/2 < D c 5/8 = +.0020, 5/8 < D c 3/4 = +.0024, 3/4 < D c 1 = +.0028 Run-out JS512 =.0004 JS512L =.0004 JS512XL =.0004 Type JS554 D c dm m l 2 a p r e1 c x 45 5540250Z4.0-SIRON-A 1/4 1/4 2 1/2 1/2 0.003 [ 4 5540250R015Z4.0-SIRON-A 1/4 1/4 2 1/2 1/2 0.015 [ 4 5540312Z4.0-SIRON-A 5/16 5/16 2 1/2 5/8 0.004 [ 4 5540312R015Z4.0-SIRON-A 5/16 5/16 2 1/2 5/8 0.015 [ 4 5540375Z4.0-SIRON-A 3/8 3/8 3 3/4 0.005 [ 4 5540375R015Z4.0-SIRON-A 3/8 3/8 3 3/4 0.015 [ 4 5540375R030Z4.0-SIRON-A 3/8 3/8 3 3/4 0.030 [ 4 5540500Z4.3-SIRON-A 1/2 1/2 3 1/2 1 0.006 [ 4 5540500Z4.0-SIRON-A 1/2 1/2 3 1/2 1 0.006 [ 4 5540500R015Z4.3-SIRON-A 1/2 1/2 3 1/2 1 0.015 [ 4 5540500R015Z4.0-SIRON-A 1/2 1/2 3 1/2 1 0.015 [ 4 5540500R030Z4.3-SIRON-A 1/2 1/2 3 1/2 1 0.030 [ 4 5540500R030Z4.0-SIRON-A 1/2 1/2 3 1/2 1 0.030 [ 4 5540625Z4.3-SIRON-A 5/8 5/8 3 3/4 1 1/4 0.008 [ 4 5540625Z4.0-SIRON-A 5/8 5/8 3 3/4 1 1/4 0.008 [ 4 5540625R015Z4.3-SIRON-A 5/8 5/8 3 3/4 1 1/4 0.015 [ 4 5540625R015Z4.0-SIRON-A 5/8 5/8 3 3/4 1 1/4 0.015 [ 4 5540625R030Z4.3-SIRON-A 5/8 5/8 3 3/4 1 1/4 0.030 [ 4 5540625R030Z4.0-SIRON-A 5/8 5/8 3 3/4 1 1/4 0.030 [ 4 5540750Z4.3-SIRON-A 3/4 3/4 4 1 1/2 0.010 [ 4 5540750Z4.0-SIRON-A 3/4 3/4 4 1 1/2 0.010 [ 4 5540750R030Z4.3-SIRON-A 3/4 3/4 4 1 1/2 0.030 [ 4 5540750R030Z4.0-SIRON-A 3/4 3/4 4 1 1/2 0.030 [ 4 5540750R060Z4.3-SIRON-A 3/4 3/4 4 1 1/2 0.060 [ 4 5540750R060Z4.0-SIRON-A 3/4 3/4 4 1 1/2 0.060 [ 4 5541000Z4.3-SIRON-A 1 1 5 2 0.012 [ 4 5541000Z4.0-SIRON-A 1 1 5 2 0.012 [ 4 5541000R030Z4.3-SIRON-A 1 1 5 2 0.030 [ 4 5541000R030Z4.0-SIRON-A 1 1 5 2 0.030 [ 4 5541000R060Z4.3-SIRON-A 1 1 5 2 0.060 [ 4 5541000R060Z4.0-SIRON-A 1 1 5 2 0.060 [ 4 Cylindrical Weldon z n ] Weldon available for cylindrical shanks (delivery time is 3 days). Add W after the when ordering: 512L100Z2.0-SIRON-AW. Picture key symbols please see page 14-15 in Solid End Mills MN2008. 205 185-208 Jabro Solid 2 US G5.indd 205 2/12/2010 11:48:42 AM

Jabro-Solid 2 JS554 Material E 1-2 E 3-4 E 5-6 a p x D c a e x D c 1 1 1 1 0.8 1 v c (sf/min) 490 (425-560) 460 (395-525) 395 (330-460) M/A/D 7a 48>52HRc 0.4 1 165 (130-195) E 8-9 E 10-11 E 12-13 E 14-15 E 16-17 E 22 0.8 1 0.6 1 1 1 0.8 1 260 (230-295) 165 (130-195) 525 (460-590) 460 (395-525) 0.5 1 230 (165-295) D c (mm) 6 8 10 12 16 20 25 n (rev/min) 7960 5970 4770 3980 2980 2390 1910 f z (in) 0.0014 0.0019 0.0024 0.0028 0.0038 0.0047 0.0059 v f (in/min) 45 45 45 45 45 45 45 n (rev/min) 7430 5570 4460 3710 2790 2230 1780 f z (in) 0.0014 0.0019 0.0024 0.0028 0.0038 0.0047 0.0059 v f (in/min) 42 42 42 42 42 42 42 n (rev/min) 6370 4770 3820 3180 2390 1910 1530 f z (in) 0.0012 0.0016 0.002 0.0024 0.0032 0.004 0.005 v f (in/min) 30 30 30 30 30 30 30 n (rev/min) 2650 1990 1590 1330 990 800 640 f z (in) 0.0005 0.0006 0.0008 0.0009 0.0013 0.0016 0.002 v f (in/min) 5 5 5 5 5 5 5 n (rev/min) 4240 3180 2550 2120 1590 1270 1020 f z (in) 0.0009 0.0013 0.0016 0.0019 0.0025 0.0032 0.0039 v f (in/min) 16 16 16 16 16 16 16 n (rev/min) 2650 1990 1590 1330 990 800 640 f z (in) 0.0007 0.0009 0.0012 0.0014 0.0019 0.0023 0.0029 v f (in/min) 7 7 7 7 7 7 7 n (rev/min) 8490 6370 5090 4240 3180 2550 2040 f z (in) 0.0012 0.0016 0.002 0.0024 0.0031 0.0039 0.0049 v f (in/min) 40 40 40 40 40 40 40 n (rev/min) 7430 5570 4460 3710 2790 2230 1780 f z (in) 0.0012 0.0016 0.002 0.0024 0.0031 0.0039 0.0049 v f (in/min) 35 35 35 35 35 35 35 n (rev/min) f z (in) v f (in/min) n (rev/min) 3710 2790 2230 1860 1390 1110 890 f z (in) 0.0009 0.0013 0.0016 0.0019 0.0026 0.0032 0.004 v f (in/min) 14 14 14 14 14 14 14 Material 206 A/D/E 1-2 A/D/E 3-4 A/D/E 5-6 a p x D c a e x D c 1 0.4 1 0.4 1 0.4 v c (sf/min) 625 (560-690) 575 (510-640) 490 (425-560) M/A/D 7a 48>52HRc 0.8 0.2 215 (180-245) E/A 8-9 E/A 10-11 A/D/E 12-13 A/D/E 14-15 E 16-17 E 22 1 0.4 1 0.4 1 0.4 1 0.4 1 0.5 1 0.4 330 (295-360) 215 (180-245) 655 (590-720) 575 (510-640) 2460 (490-2790) 295 (230-360) D c (mm) 6 8 10 12 16 20 25 n (rev/min) 10080 7560 6050 5040 3780 3020 2420 f z (in) 0.0022 0.003 0.0037 0.0045 0.0059 0.0075 0.0093 v f (in/min) 90 90 90 90 90 90 90 n (rev/min) 9280 6960 5570 4640 3480 2790 2230 f z (in) 0.0022 0.003 0.0037 0.0045 0.006 0.0075 0.0094 v f (in/min) 83 83 83 83 83 83 83 n (rev/min) 7960 5970 4770 3980 2980 2390 1910 f z (in) 0.0019 0.0025 0.0031 0.0037 0.005 0.0062 0.0078 v f (in/min) 59 59 59 59 59 59 59 n (rev/min) 3450 2590 2070 1720 1290 1030 830 f z (in) 0.0011 0.0014 0.0018 0.0021 0.0028 0.0035 0.0004 v f (in/min) 15 15 15 15 15 15 15 n (rev/min) 5310 3980 3180 2650 1990 1590 1270 f z (in) 0.0015 0.002 0.0025 0.003 0.004 0.005 0.0062 v f (in/min) 32 32 32 32 32 32 32 n (rev/min) 3450 2590 2070 1720 1290 1030 830 f z (in) 0.0011 0.0015 0.0019 0.0022 0.003 0.0038 0.0047 v f (in/min) 16 16 16 16 16 16 16 n (rev/min) 10610 7960 6370 5310 3980 3180 2550 f z (in) 0.0019 0.0025 0.0031 0.0037 0.005 0.0062 0.0078 v f (in/min) 79 79 79 79 79 79 79 n (rev/min) 9280 6960 5570 4640 3480 2790 2230 f z (in) 0.0019 0.0025 0.0031 0.0037 0.005 0.0062 0.0078 v f (in/min) 69 69 69 69 69 69 69 n (rev/min) 39790 29840 23870 19890 14920 11940 9550 f z (in) 0.0022 0.003 0.0037 0.0045 0.006 0.0075 0.0093 v f (in/min) 357 357 357 357 357 357 357 n (rev/min) 4770 3580 2860 2390 1790 1430 1150 f z (in) 0.0015 0.002 0.0025 0.003 0.004 0.005 0.0062 v f (in/min) 29 29 29 29 29 29 29 For more detailed information see pages 208, 266. E=emulsion A=air D=dry M=mist spray All cutting data are target values. 185-208 Jabro Solid 2 US G5.indd 206 2/12/2010 11:48:43 AM

Jabro-Solid 2 - JS554 Metric Tolerances: dm m = h5, D c = e7, r ³1 = +/-0.02 c = D c 3=+0.01, 3<D c 6=+0.02, 6<D c 10=+0.03, 10<D c 14=+0.04, 14<D c 18=+0.05, 18<D c 24=+0.06, 24<D c 30=+0.07 Run-out JS512 = 0.01 JS512L = 0.01 JS512XL = 0.01 Type Dimensions in mm D c dm m l 2 a p r e1 c x 45 z n JS554 554060Z4.3-SIRON-A 6 6 55 14 0.075 [ 4 554060Z4.0-SIRON-A 6 6 55 14 0.075 [ 4 554060R020Z4.3-SIRON-A 6 6 55 14 0.2 [ 4 554060R020Z4.0-SIRON-A 6 6 55 14 0.2 [ 4 554080Z4.3-SIRON-A 8 8 60 18 0.100 [ 4 554080Z4.0-SIRON-A 8 8 60 18 0.100 [ 4 554080R050Z4.3-SIRON-A 8 8 60 18 0.5 [ 4 554080R050Z4.0-SIRON-A 8 8 60 18 0.5 [ 4 554100Z4.3-SIRON-A 10 10 70 22 0.125 [ 4 554100Z4.0-SIRON-A 10 10 70 22 0.125 [ 4 554100R050Z4.3-SIRON-A 10 10 70 22 0.5 [ 4 554100R050Z4.0-SIRON-A 10 10 70 22 0.5 [ 4 554100R100Z4.3-SIRON-A 10 10 70 22 1 [ 4 554100R100Z4.0-SIRON-A 10 10 70 22 1 [ 4 554120Z4.3-SIRON-A 12 12 80 26 0.150 [ 4 554120Z4.0-SIRON-A 12 12 80 26 0.150 [ 4 554120R050Z4.3-SIRON-A 12 12 80 26 0.5 [ 4 554120R050Z4.0-SIRON-A 12 12 80 26 0.5 [ 4 554120R100Z4.3-SIRON-A 12 12 80 26 1 [ 4 554120R100Z4.0-SIRON-A 12 12 80 26 1 [ 4 554160Z4.3-SIRON-A 16 16 90 34 0.200 [ 4 554160Z4.0-SIRON-A 16 16 90 34 0.200 [ 4 554160R050Z4.3-SIRON-A 16 16 90 34 0.5 [ 4 554160R050Z4.0-SIRON-A 16 16 90 34 0.5 [ 4 554160R100Z4.3-SIRON-A 16 16 90 34 1 [ 4 554160R100Z4.0-SIRON-A 16 16 90 34 1 [ 4 554200Z4.3-SIRON-A 20 20 100 42 0.300 [ 4 554200Z4.0-SIRON-A 20 20 100 42 0.300 [ 4 554200R050Z4.3-SIRON-A 20 20 100 42 0.5 [ 4 554200R050Z4.0-SIRON-A 20 20 100 42 0.5 [ 4 554200R100Z4.3-SIRON-A 20 20 100 42 1 [ 4 554200R100Z4.0-SIRON-A 20 20 100 42 1 [ 4 554250Z4.3-SIRON-A 25 25 125 52 0.300 [ 4 554250Z4.0-SIRON-A 25 25 125 52 0.300 [ 4 554250R050Z4.3-SIRON-A 25 25 125 52 0.5 [ 4 554250R050Z4.0-SIRON-A 25 25 125 52 0.5 [ 4 554250R100Z4.3-SIRON-A 25 25 125 52 1 [ 4 554250R100Z4.0-SIRON-A 25 25 125 52 1 [ 4 Cylindrical Weldon ] Weldon available for cylindrical shanks (delivery time is 3 days). Add W after the when ordering: 512L100Z2.0-SIRON-AW. Picture key symbols please see page 14-15 in Solid End Mills MN2008. 207 185-208 Jabro Solid 2 US G5.indd 207 2/12/2010 11:48:43 AM

Jabro-Solid 2 510 and 550 series parameters re-calculated from the original parameters Note dimensions in mm Use original standard version side rough cutting data then re-calculate parameters! Use original standard version slotting cutting data then re-calculate parameters! Slotting Side Rough Side Finish Ramping Helical Drilling*** all values are percentages of original (100%) cutting data JS512 Standard L** XL** 45 30 15 5 2 a p f z a e f z a p v c a e (% of D c ) f z a p f z f z f z f z f z f z 100 100 100 100 100 115 20 70 40 50 260 115 x x x x x 80 3 3 3 75 75 75 125 260 375 10 xx 30 xx 30 xx 40 xx 40 xx 40 xx 20 xx 120 x x a p / hole a p 360 ø (% of (% of D c ) (% of D c ) f z D c ) 20 30 10 20 5 15 JS513 Standard L** XL** 100 100 100 100 100 115 10 70 30 50 260 115 x x x x x 80 3 3 3 75 75 75 125 260 375 x x x x x x x x x 30 xx 40 xx 40 xx 10 xx 130 x x 10 xx 30 xx JS514 Standard L** XL** x x x x x x 100 100 100 110 30 50 260 110 x x x 90 3 3 2 100 100 100 150 260 375 x x x x x x x x x 5* 5* 10 5 14 x x *use original standard version side rough cutting data JS553 Standard x x 100 100 100 115 3 75 125 15 20 30 40 50 40 20 130 10 30 JS554 Standard x x 100 100 100 115 3 75 125 x x x 15 30 30 20 140 x x x = Not recommended, ** L and XL versions not recommended in Seco material group 7a and 20-21, *** = Drilling is not recommended in Seco material group 7a, 10-11, 20-21. Example: Helical interpolation with JS513: V c =org. N=orig. Hole diameter=130% of D c fz=40% *orig slotting cutting data a p =( 10% of D c ) /360 Regrind and Custom Design RECONDITIONING A cost effective way to regrind and recoat Jabro solid carbide tooling Seco-Jabro offers a service where the tool is reconditioned back to the original Jabro solid geometry and coating. You receive a reconditioned as new tool that guarantees 100% performance. PROCEDURE Modified Tools Seco-Jabro offers a quick delivery solution for standard tools requiring modification to meet specific geometrical requirements. Weldon/Whistle notch OD reduction (full) Radius/facet/chamfer/concave Cutting diameter 208 External, coolant channels OD reduction, increased length Chip breakers Custom design: www.customdesign.secotools.(country code) Other modifications on request (via ZYN) 185-208 Jabro Solid 2 US G5.indd 208 2/12/2010 11:48:45 AM

209-213 Feedmax_SD245ASD265A.fm Page 209 Friday, February 12, 2010 8:57 AM Seco Feedmax For specific applications Problem solver when extra stability is needed Drill IT 7 holes in one shot. SD245A 4 land margins Special point geometry - Less radial forces - Improved centering - Strong 90 degree corner SD265A 6 land margins Less back taper Very tight manufacturing tolerances Improved centering Features: Advantages: Benefits: Optimized design - cutting edges - land margins Low friction cooling Hole quality - tolerance Application security Cost reduction - less machining time - less tool cost Seco Feedmax For specific applications 209

209-213 Feedmax_SD245ASD265A.fm Page 210 Friday, February 12, 2010 8:57 AM Seco Feedmax SD245A Drilling depth ~ 5 x D Seco Feedmax SD245A Cylindrical shank DIN 6537A A=Internal through coolant. For cutting and machining data see page. Coating: TiAlN + TiN. Hole tolerance: IT 8. Drill dia. D c (inch) Drill dia. D c (mm) Max drilling depth l 4 (inch) * l 4 l 2 l 1 l c l 6 dm m 0.1969-5 1.26 SD245A-5.0-32-6R1 1.26 3.228 1.811 1.417 1.732 0.236 0.2362-6 1.26 SD245A-6.0-32-6R1 1.26 3.228 1.811 1.417 1.732 0.236 0.2500 1/4 6.35 1.38 SD245A-02500-138-0315R1 1.38 3.583 2.165 1.417 2.087 0.315 0.2559-6.5 1.38 SD245A-6.5-35-8R1 1.38 3.583 2.165 1.417 2.087 0.315 0.2656 17/64 6.747 1.57 SD245A-02656-157-0315R1 1.57 3.583 2.165 1.417 2.087 0.315 0.2677-6.8 1.57 SD245A-6.8-40-8R1 1.57 3.583 2.165 1.417 2.087 0.315 0.2756-7 1.57 SD245A-7.0-40-8R1 1.57 3.583 2.165 1.417 2.087 0.315 0.2813 9/32 7.144 1.57 SD245A-02813-157-0315R1 1.57 3.583 2.165 1.417 2.087 0.315 0.2953 7.5 1.57 SD245A-7.5-40-8R1 1.57 3.583 2.165 1.417 2.087 0.315 0.3125 5/16 7.938 1.65 SD245A-03125-165-0315R1 1.65 3.583 2.165 1.417 2.087 0.315 0.3143-8 1.65 SD245A-8.0-42-10R1 1.65 3.583 2.165 1.417 2.087 0.315 0.3346-8.5 1.65 SD245A-8.5-42-10R1 1.65 4.055 2.480 1.575 2.402 0.394 0.3543-9 1.77 SD245A-9.0-45-10R1 1.77 4.055 2.480 1.575 2.402 0.394 0.3740-9.5 1.77 SD245A-9.5-45-10R1 1.77 4.055 2.480 1.575 2.402 0.394 0.3750 3/8 9.525 1.89 SD245A-03750-189-0394R1 1.77 4.055 2.480 1.575 2.402 0.394 0.3937-10 1.89 SD245A-10.0-48-10R1 1.77 4.055 2.480 1.575 2.402 0.394 0.4016-10.2 1.89 SD245A-10.2-48-12R1 1.89 4.646 2.874 1.772 2.795 0.472 0.4063 13/32 10.319 1.89 SD245A-04063-189-0472R1 1.89 4.646 2.874 1.772 2.795 0.472 0.4134-10.5 1.89 SD245A-10.5-48-12R1 1.89 4.646 2.874 1.772 2.795 0.472 0.4331-11 2.20 SD245A-11.0-56-12R1 2.2 4.646 2.874 1.772 2.795 0.472 0.4375 7/16 11.113 2.20 SD245A-04375-221-0472R1 2.2 4.646 2.874 1.772 2.795 0.472 0.4528-11.5 2.20 SD245A-11.5-56-12R1 2.2 4.646 2.874 1.772 2.795 0.472 0.4724-12 2.20 SD245A-12.0-56-12R1 2.2 4.646 2.874 1.772 2.795 0.472 0.4921-12.5 2.20 SD245A-12.5-56-14R1 2.2 4.882 3.110 1.772 2.795 0.551 0.5000 1/2 12.7 2.20 SD245A-05000-221-0551R1 2.2 4.882 3.110 1.772 2.795 0.551 0.5118-13 2.20 SD245A-13.0-56-14R1 2.2 4.882 3.110 1.772 2.795 0.551 0.5312 17/32 13.494 2.32 SD245A-05312-232-0551R1 2.32 4.882 3.110 1.772 2.795 0.551 0.5315-13.5 2.32 SD245A-13.5-59-14R1 2.32 4.882 3.110 1.772 2.795 0.551 0.5512-14 2.32 SD245A-14.0-59-14R1 2.32 4.882 3.110 1.772 2.795 0.551 * For intermediate diameters see the Custom Design software. 210

209-213 Feedmax_SD245ASD265A.fm Page 211 Friday, February 12, 2010 8:57 AM Seco Feedmax SD265A Drilling depth ~ 5 x D Seco Feedmax SD265A Cylindrical shank DIN 6537A A=Internal through coolant. For cutting and machining data see page. Coating: TiAlN + TiN. Hole tolerance: IT 7. Drill dia. D c (inch) Drill dia. D c (mm) Max drilling depth l 4 (inch) Dimensiond in inch l 4 l 2 l 1 l c l 6 dm m 0.2365-6.006 1.26 SD265A-6.006-32-6R1 1.260 3.228 1.811 1.417 1.732 0.236 0.3153-8.008 1.65 SD265A-8.008-42-8R1 1.650 3.583 2.165 1.417 2.087 0.315 0.3940-10.008 1.89 SD265A-10.008-48-10R1 1.890 4.055 2.480 1.575 2.402 0.394 0.4728-12.009 2.20 SD265A-12.009-56-12R1 2.200 4.646 2.874 1.772 2.795 0.472 0.5515-14.009 2.32 SD265A-14.009-59-14R1 2.320 4.882 3.110 1.772 3.031 0.551 0.6303-16.009 2.44 SD265A-16.009-62-16R1 2.440 5.236 3.346 1.890 3.268 0.630 0.2500 1/4 6.35 1.38 SD265A-02497-138-0315R1* 1.378 3.583 2.165 1.417 2.087 0.315 0.3125 5/16 7.938 1.65 SD265A-03122-165-0315R1* 1.378 3.583 2.165 1.417 2.087 0.315 0.3750 3/8 9.525 1.89 SD265A-03747-189-0394R1* 1.890 4.055 2.480 1.575 2.402 0.394 0.5000 1/2 12.7 2.20 SD265A-04997-221-0551R1* 2.200 4.882 3.110 1.772 3.031 0.551 *Dowel pin standard ANSI / ASME B18.8.2-1995. 211

209-213 Feedmax_SD245ASD265A.fm Page 212 Friday, February 12, 2010 8:57 AM Seco Feedmax Cutting data SD245 and SD265 The recommended start values for general applications are marked bold. Reduce the values in case of poor stability in the application, high hardness of the workpiece or low coolant pressure in combination with drilling deep holes (> 3 x D). Seco Material group No. Recommended cutting speed v c (sfpm) Recommended feed f, (in/rev) Internal coolant supply 4 6 8 10 12 14 1 656-590-200.0035-.0047-.0059.0047-.0059-.0071.0059-.0078-.0098.0078-.0094-.0118.0083-.0102-.0126.0091-.0118-.0142 23 620-525-200.0035-.0047-.0059.0047-.0059-.0071.0059-.0078-.0098.0078-.0094-.0118.0083-.0102-.0126.0091-.0118-.0142 45 525-425-200.0031-.0043-.0055.0043-.0055-.0067.0051-.0071-.0091.0071-.0087-.0110.0075-.0094-.0118.0082-.011-.0126 6 390-330-200.0027-.0039-.0051.0035-.0047-.0059.0043-.0063-.0083.0055-.0075-.0091.0063-.0083-.0098.0075-.0094-.0114 7 330-260-200.0020-.0031-.0043.0027-.0039-.0047.0035-.0047-.0063.0043-.0059-.0078.0051-.0067-.0083.0059-.0075-.0091 89* 330-260-200.0020-.0035-.0047.0024-.0047-.0055.0035-.0047-.0063.0039-.0067-.0083.0047-.0075-.0091.0051-.0083-.0098 10 260-230-130.0016-.0027-.0035.0020-.0035-.0043.0024-.0043-.0051.0031-.0051-.0063.0039-.0059-.0070.0043-.0067-.0083 11 230-200-100.0016-.0027-.0035.0015-.0027-.0035.0020-.0035-.0043.0023-.0043-.0055.0031-.0047-.0059.0035-.0051-.0067 12 560-460-200.0047-.0063-.0078.0063-.0083-.0098.0078-.0106-.0126.0098-.0130-.0157.0100-.0138-.0165.0118-.0157-.0177 1314 500-390-200.0043-.0059-.0071.0059-.0075-.0091.0071-.0094-.0118.0087-.0114-.0138.0091-.0122-.0146.0110-.0141-.0157 15 360-295-200.0024-.0031-.0043.0031-.0043-.0055.0043-.0055-.0067.0047-.0063-.0075.0055-.0071-.0087.0067-.0083-.0094 * Max drilling depth 5 x D with external coolant supply. Seco Feedmax Cutting data 212

209-213 Feedmax_SD245ASD265A.fm Page 213 Friday, February 12, 2010 8:57 AM Seco Feedmax Regrinding instructions Regrinding instructions for SD203, SD203A, SD205A, SD207A and SD265A 1. Conical flank 2. Web thinning Chisel edge length L Drill dia. D c (inch) L (inch).118.394.004.012 Lip height distance (axial run-out) to be within.0008" (0.02 mm).394.787.008.016 3. Grinding of flat X 4. Edge preparation Workpiece material Drill dia. <.394 b n (inch) Drill dia. >.394 Steel Stainless steel Cast iron.002.002.002.004.002.004 Max. allowed flank wear before regrinding is.004-.012" (0.10.3 mm) measured at the largest point. Specifications For steps 13 use: Diamond grinding wheel shape: Grain size: Concentration: For step 4 use: Diamond file Grain size roughing: Grain size finishing: 1A1 or 1V1 10 D76 (230 mesh) 75-100 D76 (230 mesh) D46 (400 mesh) Important! The cutting edges must be uniform and have the same size of edge preparation. The edge preparation must be applied on the whole length of the cutting edges. Regrinding will decrease drilling depth. Please review the current Material Data Safety Sheet which can be found at www.secotools.com under the Safety section. Seco Feedmax Regrinding instructions 213

214-220 CrownLoc.fm Page 214 Thursday, February 11, 2010 3:12 PM Crownloc Exchangeable tip drills Reduce your drilling costs with Seco Crownloc High Cutting Data: Optimized geometry No adjustment for reground tools TiAlN coating No Regrinding Costs: Direct (cost of regrinding) Indirect (logistics, large inventory) Less Tool Inventory: Geometries for all materials - ISO -P, -M, -K Custom Design Several diameters of crowns per drill body Range: Drill diameters.3748"-1.0232" (9.52-25.99 mm) Drill depths 1.5 x D, 3 x D, 5 x D and 7 x D Crownloc Exchangeable tip drills 214

SD103.fm Page 215 Friday, February 12, 2010 9:04 AM Crownloc SD103 Drilling depth ~ 3 x D Inch Crownloc SD103 SD103 ISO9766 fits holders: Weldon 1835B, ISO 5414, DIN 60880. Internal through coolant. For cutting and machining data see page -. For drill dia. D c (inch) For drill dia. D c (mm) Max drilling depth l 4 (inch) Dimensions in Inch l 2 l 1s l c l 3s D cby dm m D 5m 0.375-0.392 9.50-9.99 1.18 SD103-09.50/09.99-30-0625R7 4.250 2.326 1.889 1.835 0.354 0.625 0.787 0.393-0.413 10.00-10.49 1.18 SD103-10.00/10.49-30-0625R7 3.976 2.086 1.889 1.496 0.374 0.625 0.787 0.414-0.432 10.50-10.99 1.18 SD103-10.50/10.99-30-0625R7 3.976 2.086 1.889 1.496 0.393 0.625 0.787 0.433-0.452 11.00-11.49 1.18 SD103-11.00/11.49-30-0625R7 3.976 2.086 1.889 1.496 0.413 0.625 0.787 0.453-0.471 11.50-11.99 1.18 SD103-11.50/11.99-30-0625R7 3.976 2.086 1.889 1.496 0.433 0.625 0.787 0.472-0.491 12.00-12.49 1.57 SD103-12.00/12.49-40-0625R7 4.567 2.677 1.890 1.890 0.787 0.625 0.787 0.492-0.511 12.50-12.99 1.57 SD103-12.50/12.99-40-0625R7 4.583 2.693 1.890 1.906 0.787 0.625 0.787 0.512-0.550 13.00-13.99 1.57 SD103-13.00/13.99-40-0625R7 4.598 2.709 1.890 1.921 0.787 0.625 0.787 0.551-0.590 14.00-14.99 1.97 SD103-14.00/14.99-50-0625R7 5.016 3.126 1.890 2.339 0.787 0.625 0.787 0.591-0.629 15.00-15.99 1.97 SD103-15.00/15.99-50-0625R7 5.051 3.161 1.890 2.374 0.787 0.625 0.787 0.630-0.668 16.00-16.99 1.97 SD103-16.00/16.99-50-0625R7 5.079 3.189 1.890 2.402 0.787 0.625 0.787 0.669-0.708 17.00-17.99 2.36 SD103-17.00/17.99-60-0750R7 5.539 3.571 1.969 2.665 0.984 0.750 0.984 0.709-0.747 18.00-18.99 2.36 SD103-18.00/18.99-60-0750R7 5.579 3.610 1.969 2.705 0.984 0.750 0.984 0.748-0.786 19.00-19.99 2.36 SD103-19.00/19.99-60-0750R7 5.610 3.650 1.969 2.736 0.984 0.750 0.984 0.787-0.865 20.00-21.99 2.95 SD103-20.00/21.99-75-1000R7 6.476 4.271 2.204 3.484 0.767 1.000 1.220 0.866-0.944 22.00-23.99 2.95 SD103-22.00/23.99-75-1000R7 6.476 4.271 2.204 3.484 0.846 1.000 1.220 0.945-1.023 24.00-25.99 2.95 SD103-24.00/25.99-75-1000R7 6.476 4.271 2.204 3.484 0.925 1.000 1.220 Spare Parts Accessories* Key Locking screw Dynamomentic key** Replacement Blade For drill dia. (inch) For drill dia. (mm) Torque value (Nm) Torque value (in/lbs) 0.375-0.551 10.00-13.99 H1.5-2D MP6SS3x12 H00-1509 H00-1.5 0.9 8.0 0.551-0.669 14.00-16.99 H2.0-2D MP6SS4x12 H00-2020 H00-2.0 2.0 17.7 0.669-0.787 17.00-19.99 H2.5-2D MP6SS5x16 H00-2530 H00-2.5 3.0 26.6 0.787-1.023 20.00-25.99 H2.5-2D MP6SS5x16 H00-2535 H00-2.5 3.5 31.0 *To be ordered separately. ** Including blade. 215

214-220 CrownLoc.fm Page 216 Thursday, February 11, 2010 3:12 PM Crownloc Crowns Make your choice of geometry; P=steel, M=stainless steel, K=cast iron. Crownloc Crowns Crown P-geometry for steel Reamer size* M-geometry for stainless steel Reamer size* K-geometry for cast iron Reamer size* D (inch) D (mm) a Tolerances a= ± 0.004" (0.1 mm) SD100-9.52-P SD100-9.52-M 0.375 8.52 0.318 SD100-10.00-P SD100-10.00-M SD100-10.00-K 0.393 10.00 0.318 SD100-10.10-P 0.397 10.10 0.318 SD100-10.20-P SD100-10.20-M SD100-10.20-K 0.401 10.20 0.318 SD100-10.30-P 0.405 10.30 0.318 SD100-10.319-P SD100-10.319-M 0.406 10.319 0.318 SD100-10.40-P 0.409 10.40 0.318 SD100-10.50-P SD100-10.50-M SD100-10.50-K 0.413 10.50 0.334 SD100-10.70-P 0.421 10.70 0.334 SD100-10.716-P SD100-10.716-M 0.422 10.716 0.334 SD100-10.80-P 11 H6/11 H7 SD100-10.80-M SD100-10.80-K 11 H6/11 H7 0.425 10.80 0.334 SD100-10.90-P 11 H6/11 H7 SD100-10.90-M 11 H6/11 H7 0.429 10.90 0.334 SD100-11.00-P SD100-11.00-M SD100-11.00-K 0.433 11.00 0.346 SD100-11.113-P SD100-11.113-M 0.437 11.113 0.346 SD100-11.20-P SD100-11.20-M 0.440 11.20 0.346 SD100-11.30-P 0.444 11.30 0.346 SD100-11.50-P SD100-11.0-K 0.452 11.50 0.370 SD100-11.509-P SD100-11.509-M 0.453 11.509 0.370 SD100-11.70-P 0.460 11.70 0.370 SD100-11.80-P 12 H6/12 H7 SD100-11.80-M SD100-11.80-K 12 H6/12 H7 0.464 11.80 0.370 SD100-11.907-P 12 H6/12 H7 SD100-11.907-M 12 H6/12 H7 0.468 11.907 0.370 SD100-12.00-P SD100-12.00-M SD100-12.00-K 0.472 12.00 0.378 SD100-12.10-P 0.476 12.10 0.378 SD100-12.20-P 0.480 12.20 0.378 SD100-12.30-P SD100-12.30-M SD100-12.30-K 0.484 12.30 0.378 SD100-12.41-P SD100-12.41-M SD100-12.41-K 0.489 12.41 0.378 SD100-12.50-P SD100-12.50-M SD100-12.50-K 0.492 12.50 0.394 SD100-12.60-P 0.496 12.60 0.394 SD100-12.70-P SD100-12.70-M SD100-12.70-K 13 H6 0.500 12.70 0.394 SD100-12.80-P 13 H6/13 H7 SD100-12.80-M SD100-12.80-K 13 H6/13 H7 0.504 12.80 0.394 SD100-12.90-P 13 H6/13 H7 SD100-12.90-M 13 H6/13 H7 0.508 12.90 0.394 SD100-13.00-P SD100-13.00-M SD100-13.00-K 0.512 13.00 0.409 SD100-13.10-P SD100-13.10-M SD100-13.10-K 0.516 13.10 0.409 SD100-13.20-P 0.520 13.20 0.409 SD100-13.30-P SD100-13.30-M SD100-13.30-K 0.524 13.30 0.409 SD100-13.50-P SD100-13.50-M SD100-13.50-K 0.531 13.50 0.409 SD100-13.70-P SD100-13.70-M SD100-13.70-K 14 H6 0.539 13.70 0.409 SD100-13.80-P 14 H6/14 H7 SD100-13.80-M SD100-13.80-K 14 H6/14 H7 0.543 13.80 0.409 SD100-13.89-P 14 H6/14 H7 SD100-13.89-M 14 H6/14 H7 SD100-13.89-K 0.547 13.89 0.409 SD100-14.00-P SD100-14.00-M SD100-14.00-K 0.551 14.00 0.433 SD100-14.10-P 0.555 14.10 0.433 SD100-14.20-P SD100-14.20-M SD100-14.20-K 0.559 14.20 0.433 SD100-14.29-P SD100-14.29-M SD100-14.29-K 0.563 14.29 0.433 SD100-14.40-P 0.567 14.40 0.433 SD100-14.50-P SD100-14.50-M SD100-14.50-K 0.571 14.50 0.433 SD100-14.68-P SD100-14.68-M SD100-14.68-K 0.578 14.68 0.433 SD100-14.70-P SD100-14.70-M SD100-14.70-K 15 H6 0.579 14.70 0.433 SD100-14.80-P 15 H6/15 H7 SD100-14.80-M SD100-14.80-K 15 H6/15 H7 0.583 14.80 0.433 SD100-14.90-P 15 H6/15 H7 SD100-14.90-M 15 H6/15 H7 0.587 14.90 0.433 SD100-15.00-P SD100-15.00-M SD100-15.00-K 0.591 15.00 0.469 SD100-15.08-P SD100-15.08-M SD100-15.08-K 0.594 15.08 0.469 SD100-15.10-P 0.594 15.10 0.469 SD100-15.20-P 0.598 15.20 0.469 SD100-15.25-P SD100-15.25-M SD100-15.25-K 0.600 15.25 0.469 SD100-15.48-P SD100-15.48-M SD100-15.48-K 0.609 15.48 0.469 SD100-15.50-P SD100-15.50-M SD100-15.50-K 0.610 15.50 0.469 SD100-15.70-P SD100-15.70-M SD100-15.70-K 16 H6 0.618 15.70 0.469 SD100-15.80-P 16 H6/16 H7 SD100-15.80-M SD100-15.80-K 16 H6/16 H7 0.622 15.80 0.469 SD100-15.88-P 16 H6/16 H7 SD100-15.88-M 16 H6/16 H7 SD100-15.88-K 16 H6/16 H7 0.625 15.88 0.469 SD100-16.00-P SD100-16.00-M SD100-16.00-K 0.630 16.00 0.496 * For further information on what reamer to use and how to use it, see MN Holemaking. 216

214-220 CrownLoc.fm Page 217 Thursday, February 11, 2010 3:12 PM Crownloc Crowns Make your choice of geometry; P=steel, M=stainless steel, K=cast iron. Crown P-geometry for steel Reamer size* M-geometry for stainless steel Reamer size* K-geometry for cast iron Reamer size* D (inch) D (mm) a Tolerances a= ± 0.004" (0.1 mm) SD100-16.10-P 0.634 16.10 0.496 SD100-16.20-P 0.638 16.20 0.496 SD100-16.25-P 0.640 16.25 0.496 SD100-16.27-P SD100-16.27-M SD100-16.27-K 0.641 16.27 0.496 SD100-16.40-P SD100-16.40-K 0.645 16.40 0.496 SD100-16.50-P SD100-16.50-M SD100-16.50-K 0.650 16.50 0.496 SD100-16.67-P SD100-16.67-M SD100-16.67-K 0.656 16.67 0.496 SD100-16.70-P SD100-16.70-M SD100-16.70-K 17 H6 0.657 16.70 0.496 SD100-16.80-P 17 H6/17 H7 SD100-16.80-M SD100-16.80-K 17 H6/17 H7 0.661 16.80 0.496 SD100-16.90-P 17 H6/17 H7 SD100-16.90-M 17 H6/17 H7 0.665 16.90 0.496 SD100-17.00-P SD100-17.00-M SD100-17.00-K 0.669 17.00 0.524 SD100-17.07-P SD100-17.07-M SD100-17.07-K 0.672 17.07 0.524 SD100-17.10-P 0.673 17.10 0.524 SD100-17.20-P SD100-17.20-K 0.677 17.20 0.524 SD100-17.30-K 0.681 17.30 0.524 SD100-17.46-P SD100-17.46-M SD100-17.46-K 0.687 17.46 0.524 SD100-17.50-P SD100-17.50-M SD100-17.50-K 0.689 17.50 0.524 SD100-17.70-P SD100-17.70-M SD100-17.70-K 18 H6 0.697 17.70 0.524 SD100-17.80-P 18 H6/18 H7 SD100-17.80-M SD100-17.80-K 18 H6/18 H7 0.701 17.80 0.524 SD100-17.86-P 18 H6/18 H7 SD100-17.86-M SD100-17.86-K 18 H6/18 H7 0.703 17.86 0.524 SD100-17.90-P 18 H6/18 H7 SD100-17.90-M 18 H6/18 H7 0.705 17.90 0.524 SD100-18.00-P SD100-18.00-M SD100-18.00-K 0.709 18.00 0.567 SD100-18.10-P 0.713 18.10 0.567 SD100-18.20-P 0.717 18.20 0.567 SD100-18.26-P SD100-18.26-M SD100-18.26-K 0.719 18.26 0.567 SD100-18.50-P SD100-18.50-M SD100-18.50-K 0.728 18.50 0.567 SD100-18.65-P SD100-18.65-M SD100-18.65-K 0.734 18.65 0.567 SD100-18.70-P SD100-18.70-M SD100-18.70-K 19 H6/19 H7 0.736 18.70 0.567 SD100-18.80-P 19 H6/19 H7 SD100-18.80-M SD100-18.80-K 19 H6/19 H7 0.740 18.80 0.567 SD100-18.90-P 19 H6/19 H7 SD100-18.90-M 19 H6/19 H7 0.744 18.90 0.567 SD100-19.00-P SD100-19.00-M SD100-19.00-K 0.748 19.00 0.598 SD100-19.05-P SD100-19.05-M SD100-19.05-K 0.750 19.05 0.598 SD100-19.10-P 0.752 19.10 0.598 SD100-19.20-P SD100-19.20-M SD100-19.20-K 0.756 19.20 0.598 SD100-19.25-P 0.758 19.25 0.598 SD100-19.45-P SD100-19.45-M SD100-19.45-K 0.766 19.45 0.598 SD100-19.50-P SD100-19.50-M SD100-19.50-K 0.768 19.50 0.598 SD100-19.70-P SD100-19.70-M SD100-19.70-K 20 H6 0.776 19.70 0.598 SD100-19.80-P 20 H6/20 H7 SD100-19.80-M SD100-19.80-K 20 H6/20 H7 0.780 19.80 0.598 SD100-19.84-P 20 H6/20 H7 SD100-19.84-M SD100-19.84-K 20 H6/20 H7 0.781 19.84 0.598 SD100-19.90-P 20 H6/20 H7 SD100-19.90-M 20 H6/20 H7 0.783 19.90 0.598 SD100-19.99-P 0.787 19.99 0.598 SD100-20.00-P SD100-20.00-M SD100-20.00-K 0.7874 20.00 0.598 SD100-20.241-P 0.796 20.241 0.598 SD100-20.50-P SD100-20.50-M SD100-20.50-K 0.807 20.50 0.598 SD100-20.638-P SD100-20.638-M 0.812 20.638 0.598 SD100-20.80-P 21 H6/21 H7 SD100-20.80-M SD100-20.80-K 21 H6/21 H7 0.819 20.80 0.598 SD100-20.90-P 21 H6/21 H7 SD100-20.90-M 21 H6/21 H7 0.823 20.90 0.598 SD100-21.00-P SD100-21.00-M SD100-21.00-K 0.826 21.00 0.598 SD100-21.034-P 0.828 21.034 0.598 SD100-21.20-P 0.834 21.20 0.598 SD100-21.30-P 0.839 21.30 0.598 SD100-21.430-P SD100-21.430-M 0.843 21.430 0.598 SD100-21.50-P SD100-21.50-M SD100-21.50-K 0.846 21.50 0.598 SD100-21.80-P 22 H6/22 H7 SD100-21.80-M SD100-21.80-K 22 H6/22 H7 0.858 21.80 0.598 SD100-21.829-P 22 H6/22 H7 0.859 21.829 0.598 SD100-21.90-P SD100-21.90-M 22 H6/22 H7 0.862 21.90 0.598 SD100-22.00-P SD100-22.00-M SD100-22.00-K 0.866 22.00 0.598 SD100-22.225-P SD100-22.225-M 0.875 22.225 0.598 SD100-22.50-P SD100-22.50-M SD100-22.50-K 0.885 22.50 0.598 * For further information on what reamer to use and how to use it, see MN Holemaking. 217

214-220 CrownLoc.fm Page 218 Thursday, February 11, 2010 3:12 PM Crownloc Crowns Make your choice of geometry; P=steel, M=stainless steel, K=cast iron. Crown P-geometry for steel Reamer size* M-geometry for stainless steel Reamer size* K-geometry for cast iron Reamer size* D (inch) D (mm) a Tolerances a= ± 0.004" (0.1 mm) SD100-22.621-P 0.890 22.621 0.598 SD100-22.80-P 23 H6/23 H7 SD100-22.80-M SD100-22.80-K 23 H6/23 H7 0.898 22.80 0.598 SD100-22.90-P 23 H6/23 H7 SD100-22.90-M 23 H6/23 H7 0.902 22.90 0.598 SD100-23.00-P SD100-23.00-M SD100-23.00-K 0.905 23.00 0.598 SD100-23.416-P 0.921 23.416 0.598 SD100-23.50-P SD100-23.50-M SD100-23.50-K 0.925 23.50 0.598 SD100-23.813-P 24 H6/24 H7 SD100-23.813-M SD100-23.813-K 24 H6/24 H7 0.933 23.70 0.598 SD100-23.90-P 24 H6/24 H7 SD100-23.90-M 24 H6/24 H7 0.941 23.90 0.598 SD100-24.00-P SD100-24.00-M SD100-24.00-K 0.944 24.00 0.598 SD100-24.209-P 0.953 24.209 0.598 SD100-24.50-P SD100-24.50-M SD100-24.50-K 0.964 24.50 0.598 SD100-24.605-P 0.968 24.605 0.598 SD100-24.80-P 25 H6/25 H7 SD100-24.80-M SD100-24.80-K 25 H6/25 H7 0.976 24.80 0.598 SD100-24.90-P 25 H6/25 H7 SD100-24.90-M 25 H6/25 H7 SD100-24.90-K 0.980 24.90 0.598 SD100-25.00-P SD100-25.00-M SD100-25.00-K 0.984 25.00 0.598 SD100-25.40-P SD100-25.40-M SD100-25.40-K 1.000 25.40 0.598 SD100-25.50-P 1.004 25.50 0.598 SD100-25.60-P SD100-25.60-M 1.008 25.60 0.598 SD100-25.80-P 26 H6/26 H7 SD100-25.80-M SD100-25.80-K 26 H6/26 H7 1.016 25.80 0.598 SD100-25.90-P 26 H6/26 H7 SD100-25.90-M 26 H6/26 H7 SD100-25.90-K 1.020 25.90 0.598 SD100-25.99-P SD100-25.99-K 1.023 25.99 0.598 L-geometry SD100-19.22-L 0.757 19.22 0.492 For long chipping materials * For further information on what reamer to use and how to use it, see MN Holemaking. 218

214-220 CrownLoc.fm Page 219 Thursday, February 11, 2010 3:12 PM Crownloc Cutting data SD101, SD103 and SD105 The start values for general applications are marked bold. Seco Material group No. Geometry Cutting Speed v c (sf/min) Feed f (inch/rev) for drill diameter Ø 9.5011.99 Ø 12.0013.99 Ø 14.0015.99 Ø 16.0017.99 Ø 18.0025.99 1 P 425 360 295 0.009 0.011 0.010 0.012 0.011 0.013 0.012 0.014 0.012 0.014 23 P 425 325 260 0.007 0.009 0.011 0.007 0.009 0.011 0.008 0.010 0.012 0.009 0.011 0.013 0.009 0.011 0.013 45 P 395 295 260 0.006 0.007 0.009 0.007 0.009 0.011 0.008 0.010 0.012 0.009 0.011 0.013 0.009 0.011 0.013 6* P 295 230 130 0.005 0.007 0.009 0.005 0.007 0.009 0.005 0.008 0.010 0.005 0.009 0.011 0.005 0.009 0.011 7* M 260 165 100 0.004 0.006 0.007 0.004 0.007 0.009 0.004 0.007 0.009 0.004 0.008 0.010 0.004 0.009 0.011 89* P 295 230 195 0.003 0.004 0.005 0.003 0.004 0.005 0.004 0.005 0.006 0.004 0.005 0.006 0.005 0.006 0.007 10* M 260 195 165 0.003 0.004 0.005 0.003 0.004 0.005 0.004 0.005 0.006 0.004 0.005 0.006 0.005 0.006 0.007 11* M 260 195 165 0.002 0.003 0.005 0.003 0.003 0.005 0.003 0.004 0.006 0.003 0.005 0.006 0.004 0.006 0.007 12 K 525 395 330 0.007 0.011 0.013 0.007 0.011 0.015 0.009 0.013 0.019 0.011 0.015 0.023 0.011 0.015 0.023 1314 K 425 330 230 0.007 0.010 0.013 0.007 0.011 0.015 0.009 0.013 0.017 0.011 0.015 0.019 0.011 0.015 0.019 15 K 360 295 230 0.004 0.006 0.007 0.005 0.009 0.013 0.007 0.011 0.015 0.009 0.013 0.017 0.009 0.013 0.017 16 M 1150 980 650 0.007 0.009 0.013 0.007 0.009 0.013 0.008 0.012 0.016 0.010 0.014 0.018 0.010 0.014 0.018 17 M 980 820 490 0.007 0.009 0.013 0.007 0.009 0.013 0.008 0.012 0.016 0.010 0.014 0.018 0.010 0.014 0.018 * When drilling in high strength steels and stainless steels with 5 x D drills (SD105), it may be necessary to reduce the feed during entrance in order to achieve a better centering function. Or use a SD101 drill as a pre drill. Note! For safety reasons, maximum allowed rpm for Seco Crownloc Drill diameter Drill diameter Max rpm.393 -.668 10.00-16.99 15,000.669 -.787 17.00-19.99 12,000.788-1.000 20.00-25.99 10,000 Crownloc Cutting data 219

214-220 CrownLoc.fm Page 220 Thursday, February 11, 2010 3:12 PM Crownloc Cutting data for superalloys Superalloys The recommendations are only valid for Crownloc M-geometry. 1. The machinability of the actual material expressed in percent is given in the tables on page. 2. Read the recommended cutting speed and feed with regard to the relevant machinability. Start value for feed is marked with bold figures and given for each diameter. Machinability % Geometry Recommended cutting speed v c (sf/min) Internal coolant supply Feed f (inch/rev) for drill diameter Ø 9.5013.99 Ø 14.0015.99 Ø 16.0017.99 Ø 18.0025.99 60 M 260.005-.007-.009.007-.008-.010.008-.009-.010.009-.010-.012 55 M 245.005-.007-.009.007-.008-.010.008-.009-.010.009-.010-.012 50 M 230.005-.007-.009.007-.008-.010.008-.009-.010.009-.010-.012 45 M 210.005-.007-.009.007-.008-.011.008-.009-.011.009-.010-.012 40 M 180.005-.007-.009.007-.008-.012.008-.009-.012.009-.010-.012 35 M 165.005-.006-.008.006-.008-.010.007-.009-.010.007-.009-.011 30 M 147.005-.006-.008.006-.008-.010.007-.009-.010.007-.009-.011 25 M 130.005-.006-.008.006-.008-.010.007-.009-.010.007-.009-.011 20 M 115.003-.004-.005.003-.005-.006.004-.005-.007.004-.005-.006 15 M 80.003-.004-.005.003-.005-.006.004-.005-.007.004-.005-.006 10 M 35.003-.004-.005.003-.005-.006.004-.005-.007.004-.005-.006 5 M 32.003-.004-.005.003-.005-.006.004-.005-.007.004-.005-.006 Coolant flow at different pressures Flow (gal/min) Recommended coolant flow D x 1 gal/min. Minimum coolant flow D/2 gal/min. D = Drill diameter. Minimum recommended coolant pressure 150 psi with < 3 x D. Minimum recommended coolant pressure 300 psi with > 3 x D. Coolant mix When drilling in stainless and high strength steels a mix of 10% is recommended. Coolant pressure (psi) Crownloc Cutting data for superalloys 220

221 Perfo_cover.fm Page 221 Thursday, February 11, 2010 3:14 PM Perfomax indexable insert drills Reduce your drilling costs with Seco Perfomax High Cutting Data: Strong square inserts High drill body stability Wiper geometry User friendly: Unique chip flute design Low noise level Long and predictable tool life: Optimized chip evacuation - Low friction coating Strong drill body and insert design Modern grades Range: 2 x D, 3 x D, 4 x D and 5 x D Drill diameters.590" - 3.5" (15-85 mm) Rotating and non-rotating Perfomax indexable insert drills 221

222 Perfo SD503_C6_1.fm Page 222 Thursday, February 11, 2010 3:16 PM Perfomax SD503 Drilling depth 3 x D Perfomax SD503 Seco Capto C6 shank For insert information see, MN Holemaking. For cutting data, see pages 226-228. Drill dia. D c (inch) Drill dia. D c (mm) Drill depth l 4 (mm) Dimensions in mm Insert types Radial adjustment l 1s l 3s D 5m Center insert Periph insert - + 0.591 15 45 SD503-15-45-C6 [ 84 50 63 SPGX 0502-C1 SCGX 050204.. 0.25 0.35 0.610 15.5 47 SD503-15.5-47-C6 [ 86 52 63 SPGX 0502-C1 SCGX 050204.. 0.30 0.35 0.630 16 48 SD503-16-48-C6 [ 88 53 63 SPGX 0502-C1 SCGX 050204.. 0.15 0.45 0.650 16.5 50 SD503-16.5-50-C6 [ 90 55 63 SPGX 0502-C1 SCGX 050204.. 0.15 0.40 0.670 17 51 SD503-17-51-C6 [ 91 56 63 SPGX 0502-C1 SCGX 050204.. 0.10 0.50 0.689 17.5 53 SD503-17.5-53-C6 [ 94 58 63 SPGX 0602-C1 SCGX 050204.. 0.50 0.50 0.709 18 54 SD503-18-54-C6 [ 95 59 63 SPGX 0602-C1 SCGX 050204.. 0.35 0.25 0.728 18.5 56 SD503-18.5-56-C6 [ 97 61 63 SPGX 0602-C1 SCGX 050204.. 0.35 0.25 0.748 19 57 SD503-19-57-C6 [ 98 62 63 SPGX 0602-C1 SCGX 050204.. 0.15 0.45 0.787 20 60 SD503-20-60-C6 [ 103 65 63 SPGX 0602-C1 SCGX 060204.. 0.10 0.45 0.812 20.62 62 SD503-20.62-62-C6 [ 105 67 63 SPGX 0602-C1 SCGX 060204.. 0.10 0.50 0.827 21 63 SD503-21-63-C6 [ 106 68 63 SPGX 0602-C1 SCGX 060204.. 0.10 0.50 0.866 22 66 SD503-22-66-C6 [ 109 71 63 SPGX 0703-C1 SCGX 060204.. 0.45 0.50 0.875 22.23 67 SD503-22.23-67-C6 [ 110 72 63 SPGX 0703-C1 SCGX 060204.. 0.45 0.50 0.906 23 69 SD503-23-69-C6 [ 113 74 63 SPGX 0703-C1 SCGX 070308.. 0.35 0.50 0.945 24 72 SD503-24-72-C6 [ 117 77 63 SPGX 0703-C1 SCGX 070308.. 0.15 0.50 0.984 25 75 SD503-25-75-C6 [ 121 80 63 SPGX 0703-C1 SCGX 070308.. 0.15 0.50 1.000 25.4 77 SD503-25.4-77-C6 [ 123 82 63 SPGX 0703-C1 SCGX 070308.. 0.15 0.50 1.024 26 78 SD503-26-78-C6 [ 124 83 63 SPGX 0903-C1 SCGX 070308.. 0.50 0.15 1.063 27 81 SD503-27-81-C6 [ 127 86 63 SPGX 0903-C1 SCGX 070308.. 0.50 0.30 1.102 28 84 SD503-28-84-C6 [ 131 89 63 SPGX 0903-C1 SCGX 070308.. 0.30 0.50 1.126 28.59 86 SD503-28.59-86-C6 [ 133 91 63 SPGX 0903-C1 SCGX 09T308.. 0.20 0.50 1.142 29 87 SD503-29-87-C6 [ 134 92 63 SPGX 0903-C1 SCGX 09T308.. 0.20 0.50 1.181 30 90 SD503-30-90-C6 [ 137 95 63 SPGX 0903-C1 SCGX 09T308.. 0.15 0.50 1.220 31 93 SD503-31-93-C6 [ 140 98 63 SPGX 0903-C1 SCGX 09T308.. 0.15 0.50 1.250 31.75 96 SD503-31.75-96-C6 [ 144 101 63 SPGX11T3-C1 SCGX 09T308.. 0.50 0.35 1.260 32 96 SD503-32-96-C6 [ 144 101 63 SPGX11T3-C1 SCGX 09T308.. 0.50 0.35 1.300 33 99 SD503-33-99-C6 [ 147 104 63 SPGX11T3-C1 SCGX 09T308.. 0.50 0.50 1.339 34 102 SD503-34-102-C6 [ 150 107 63 SPGX11T3-C1 SCGX 09T308.. 0.25 0.50 1.378 35 105 SD503-35-105-C6 [ 153 110 63 SPGX11T3-C1 SCGX 120408.. 0.25 0.50 1.417 36 108 SD503-36-108-C6 [ 156 113 63 SPGX11T3-C1 SCGX 120408.. 0.10 0.50 1.457 37 111 SD503-37-111-C6 [ 159 116 63 SPGX11T3-C1 SCGX 120408.. 0.10 0.50 1.496 38 114 SD503-38-114-C6 [ 162 119 63 SPGX 12T3-C1 SCGX 120408.. 0.10 0.50 1.535 39 117 SD503-39-117-C6 [ 165 122 63 SPGX 12T3-C1 SCGX 120408.. 0.40 0.50 1.575 40 120 SD503-40-120-C6 [ 168 125 63 SPGX 12T3-C1 SCGX 120408.. 0.20 0.50 222

223 Perfo SD503_C6_2.fm Page 223 Thursday, February 11, 2010 3:18 PM Perfomax SD503 Drilling depth 3 x D Perfomax SD503 Seco Capto C6 shank Drill dia. D c (inch) Drill dia. D c (mm) Drill depth l 4 (mm) Dimensions in mm Insert types Radial adjustment l 1s l 3s D 5m Center insert Periph insert - + Spare Parts Accessories* Locking screw Key Dynamomentic key** Replacement Blade For drill dia. (mm) Center insert Periph insert Torque value (Nm) Torque value (in/lbs) 15-17 C02245-T07P C02245-T07P T07P-2 T00-07P09 T00-07P 0.9 8.0 17.50-19 C02205-T07P C02245-T07P T07P-2 T00-07P09 T00-07P 0.9 8.0 19.50-21 C02205-T07P C02205-T07P T07P-2 T00-07P09 T00-07P 0.9 8.0 21.50-22.49 C02506-T08P C02506-T08P T08P-2 T00-08P12 T00-08P 1.2 10.6 22.50-25.49 C02507-T08P C03007-T08P T08P-2 T00-08P12 T00-08P 1.2 10.6 25.50-28 C03007-T09P C03007-T09P T09P-2 T00-09P20 T00-09P 2.0 17.7 28.50-31 C03007-T09P C03009-T09P T09P-2 T00-09P20 T00-09P 2.0 17.7 31.50-34 C03508-T15P C03508-T15P T15P-2 T00-15P30 T00-15P 3.0 26.6 35-43 C03508-T15P C05012-T15P T15P-2 T00-15P30 T00-15P 3.0 26.6 44-59 C04011-T15P C05012-T15P T15P-2 T00-15P30 T00-15P 3.0 26.6 [ Stock standard \ Non stock standard * Not included in delivery. ** Including blade. 223

224 Perfo SD504_C6_1.fm Page 224 Thursday, February 11, 2010 3:20 PM Perfomax SD504 Drilling depth 4 x D Perfomax SD504 Seco Capto C6 shank For insert information see, MN Holemaking. For cutting data, see pages 226-228. Dimensions in mm Insert types Radial adjustment Drill dia. D c (inch) Drill dia. D c (mm) Drill depth l 4 (mm) l 1s l 3s D 5m Center insert Periph insert - + 0.670 17 68 SD504-17-68-C6 [ 108 73 63 SPGX 0502-C1 SCGX 050204.. 0.10 0.50 0.689 17.5 70 SD504-17.5-70-C6 [ 111 75 63 SPGX 0602-C1 SCGX 050204.. 0.50 0.50 0.709 18 72 SD504-18-72-C6 [ 113 77 63 SPGX 0602-C1 SCGX 050204.. 0.35 0.25 0.728 18.5 74 SD504-18.5-74-C6 [ 115 79 63 SPGX 0602-C1 SCGX 050204.. 0.35 0.25 0.748 19 76 SD504-19-76-C6 [ 117 81 63 SPGX 0602-C1 SCGX 050204.. 0.15 0.45 0.787 20 80 SD504-20-80-C6 [ 123 85 63 SPGX 0602-C1 SCGX 060204.. 0.10 0.45 0.812 20.62 83 SD504-20.62-83-C6 [ 126 88 63 SPGX 0602-C1 SCGX 060204.. 0.10 0.50 0.827 21 84 SD504-21-84-C6 [ 127 89 63 SPGX 0602-C1 SCGX 060204.. 0.10 0.50 0.866 22 88 SD504-22-88-C6 [ 131 93 63 SPGX 0703-C1 SCGX 060204.. 0.45 0.50 0.875 22.23 89 SD504-22.23-89-C6 [ 132 94 63 SPGX 0703-C1 SCGX 060204.. 0.45 0.50 0.906 23 92 SD504-23-92-C6 [ 136 97 63 SPGX 0703-C1 SCGX 070308.. 0.35 0.50 0.945 24 96 SD504-24-96-C6 [ 141 101 63 SPGX 0703-C1 SCGX 070308.. 0.15 0.50 0.984 25 100 SD504-25-100-C6 [ 146 105 63 SPGX 0703-C1 SCGX 070308.. 0.15 0.50 1.000 25.4 102 SD504-25.4-102-C6 [ 148 107 63 SPGX 0703-C1 SCGX 070308.. 0.15 0.50 1.023 26 104 SD504-26-104-C6 [ 150 109 63 SPGX 0903-C1 SCGX 070308.. 0.50 0.15 1.063 27 108 SD504-27-108-C6 [ 154 113 63 SPGX 0903-C1 SCGX 070308.. 0.50 0.30 1.102 28 112 SD504-28-112-C6 [ 159 117 63 SPGX 0903-C1 SCGX 070308.. 0.30 0.50 1.126 28.59 115 SD504-28.59-115-C6 [ 162 120 63 SPGX 0903-C1 SCGX 09T308.. 0.20 0.50 1.142 29 116 SD504-29-116-C6 [ 163 121 63 SPGX 0903-C1 SCGX 09T308.. 0.20 0.50 1.181 30 120 SD504-30-120-C6 [ 167 125 63 SPGX 0903-C1 SCGX 09T308.. 0.15 0.50 1.220 31 124 SD504-31-124-C6 [ 171 129 63 SPGX 0903-C1 SCGX 09T308.. 0.15 0.50 1.250 31.75 127 SD504-31.75-127-C6 [ 175 132 63 SPGX 11T3-C1 SCGX 09T308.. 0.50 0.35 1.260 32 128 SD504-32-128-C6 [ 176 133 63 SPGX 11T3-C1 SCGX 09T308.. 0.50 0.35 1.299 33 132 SD504-33-132-C6 [ 180 137 63 SPGX 11T3-C1 SCGX 09T308.. 0.50 0.50 1.339 34 136 SD504-34-136-C6 [ 184 141 63 SPGX 11T3-C1 SCGX 09T308.. 0.25 0.50 1.378 35 140 SD504-35-140-C6 [ 188 145 63 SPGX 11T3-C1 SCGX 120408.. 0.25 0.50 1.417 36 144 SD504-36-144-C6 [ 192 149 63 SPGX 11T3-C1 SCGX 120408.. 0.10 0.50 1.457 37 148 SD504-37-148-C6 [ 196 153 63 SPGX 11T3-C1 SCGX 120408.. 0.10 0.50 1.496 38 152 SD504-38-152-C6 [ 200 157 63 SPGX 12T3-C1 SCGX 120408.. 0.50 0.50 1.535 39 156 SD504-39-156-C6 [ 204 161 63 SPGX 12T3-C1 SCGX 120408.. 0.20 0.50 1.575 40 160 SD504-40-160-C6 [ 208 165 63 SPGX 12T3-C1 SCGX 120408.. 0.40 0.50 224

225 Perfo SD504_C6_2.fm Page 225 Thursday, February 11, 2010 3:22 PM Perfomax SD504 Drilling depth 4 x D Perfomax SD504 Seco Capto C6 shank Drill dia. D c (inch) Drill dia. D c (mm) Drill depth l 4 (mm) Dimensions in mm Insert types Radial adjustment l 1s l 3s D 5m Center insert Periph insert - + Spare Parts Accessories* Locking screw Key Dynamomentic key** Replacement Blade For drill dia. (mm) Center insert Periph insert Torque value (Nm) Torque value (in/lbs) 17 C02245-T07P C02245-T07P T07P-2 T00-07P09 T00-07P 0.9 8.0 17.50-19 C02205-T07P C02245-T07P T07P-2 T00-07P09 T00-07P 0.9 8.0 19.50-21 C02205-T07P C02205-T07P T07P-2 T00-07P09 T00-07P 0.9 8.0 21.50-22.49 C02506-T08P C02506-T08P T08P-2 T00-08P12 T00-08P 1.2 10.6 22.50-25.49 C02507-T08P C03007-T08P T08P-2 T00-08P12 T00-08P 1.2 10.6 25.50-28 C03007-T09P C03007-T09P T09P-2 T00-09P20 T00-09P 2.0 17.7 28.50-31 C03007-T09P C03009-T09P T09P-2 T00-09P20 T00-09P 2.0 17.7 31.50-34 C03508-T15P C03508-T15P T15P-2D T00-15P30 T00-15P 3.0 26.6 35-40 C03508-T15P C05012-T15P T15P-2D T00-15P30 T00-15P 3.0 26.6 [ Stock standard \ Non stock standard * Not included in delivery. ** Including blade. 225

226-227 Perfo_Cutdata1.fm Page 226 Thursday, February 11, 2010 3:24 PM Perfomax Cutting data SD502 2 x D, SD503 3 x D Seco Material group No. Periphery grade Recommended geometry, grade and cutting speed v c (sf/min) v c sf/min Periphery geometry Center grade/geometry The recommended first choice for general applications are marked bold. Recommended feed f in inch/rev for drill diameter Ø.590.709 Ø.710.866 Ø.8671.062 Ø 1.0631.34 Ø 1.341.75 Ø 1.752.375 1 T2000D 820-1020 -P1 -P2 T400D -C1.0016.0020.0028.0020.0028.0035.0028.0035.0043.0031.0039.0051.0035.0051.0059.0039.0055.0063 23 45 6 7 89 10 T2000D T3000D 755-985 555-755 -P1 -P2 T400D -C1.0016.0035.0043 T2000D 755-920 Wiper T400D -C1.0031 -.0079.0039 -.0094.0047 -.0110.0055 -.0126.0063 -.0142.0071 -.0157 T1000D T2000D T3000D 720-985 590-820 495-720 -P1 -P2 T400D T3000D -C1.0016.0039.0047 T2000D 590-720 Wiper T400D -C1.0031 -.0079.0039 -.0094.0047 -.0110.0055 -.0126.0063 -.0142.0071 -.0157 T1000D T2000D T3000D 525-790 460-655 360-555 -P1 -P2 T400D T3000D -C1.0016.0035.0043 T2000D 460-590 Wiper T400D -C1.0031 -.0063.0039 -.0079.0047 -.0094.0055 -.0102.0063 -.0110.0071 -.0118 T250D T3000D 360-490 295-460 -P1 -P2 T400D -C1.0016.0028.0031 T2000D 330-460 Wiper T400D -C1.0023 -.0047.0031 -.0055.0047-.0071.0051 -.0075.0059 -.0083.0067 -.0091 T2000D T3000D 525-755 490-720 -P1 -P2 T400D -C1.0016.0023.0031 T2000D 525-690 Wiper T400D -C1.0020 -.0043.0031 -.0055.0043 -.0067.0047 -.0071.0051 -.0075.0055 -.0079 T250D T3000D 395-460 410-555 -P1 -P2 T400D -C1.0016.0023.0031.0020.0043.0051.0028.0051.0059.0020.0043.0059.0016.0035.0043.0020.0035.0043.0016.0023.0031.0031.0055.0063.0039.0063.0075.0031.0055.0071.0023.0047.0055.0023.0043.0055.0016.0028.0035.0039.0063.0071.0047.0071.0087.0043.0067.0079.0028.0051.0063.0028.0047.0059.0016.0031.0039.0047.0071.0079.0059.0083.0098.0051.0075.0087.0035.0059.0071.0031.0051.0063.0016.0039.0047.0055.0079.0087.0067.0091.0110.0059.0083.0098.0043.0067.0079.0031.0055.0067.0020.0043.0051 11 T250D T3000D 295-330 330-425 -P1 -P2 T400D -C1.0016.0023.0031.0016.0023.0031.0016.0028.0035.0016.0031.0039.0016.0039.0047.0020.0043.0051 12 1314 15 T1000D T2000D 790-1050 655-820 -P1 -P2 T400D T3000D -C1.0031.0055.0063 T2000D 625-785 Wiper T400D -C1.0039 -.0094.0047 -.0110.0055 -.0126.0063 -.0142.0071 -.0118.0079 -.0157 T1000D T2000D 625-820 490-655 -P1 -P2 T400D T3000D -C1.0023.0047.0055 T2000D 490-625 Wiper T400D -C1.0039 -.0079.0047 -.0094.0055 -.0110.0063 -.0126.0071 -.0118.0079 -.0142 T1000D T2000D T3000D 490-655 425-490 295-425 -P1 -P2 T400D T3000D -C1.0016.0023.0031.0039.0063.0071.0031.0055.0063.0016.0031.0039.0055.0079.0087.0047.0071.0079.0020.0043.0051.0063.0087.0094.0059.0083.0091.0028.0051.0059.0075.0098.0106.0067.0091.0098.0035.0059.0067.0094.0118.0126.0079.0102.0110.0047.0071.0079 16 T250D T3000D 720-1315 820-1480 -P1 T400D -C1.0023.0047.0055.0031.0055.0063.0047.0071.0079.0059.0083.0091.0067.0091.0098.0079.0102.0110 17 T250D T3000D 490-1050 555-1150 -P1 T400D -C1.0023.0047.0055.0031.0055.0063.0047.0071.0079.0059.0083.0091.0067.0091.0098.0079.0102.0110 Tool life Inserts should not be used with flank wear exceeding 0.008-0.016" (0.20.4 mm) measured at the largest point. Cutting speed recommendations above are based upon peripheral insert tool life of 23 feet (7 m) drilled hole or (2030 minutes). Perfomax Cutting data 226

226-227 Perfo_Cutdata1.fm Page 227 Thursday, February 11, 2010 3:24 PM Perfomax Cutting data SD504 4 x D The recommended first choice for general applications are marked bold. Seco Material group No. Periphery grade Recommended geometry, grade and cutting speed v c (sf/min) v c sf/min Periphery geometry Center grade/geometry Recommended feed f in inch/rev for drill diameter Ø.594.709 Ø.748.866 Ø.9061.062 Ø 1.0631.34 Ø 1.342.375 1 T2000D 690-920 -P1 -P2 T400D -C1.0016.0019.0028.0019.0028.0035.0028.0035.0043.0031.0039.0047.0035.0051.0059 23 T2000D T3000D 655-850 490-720 -P1 -P2 T400D -C1.0016.0031.0039.0016.0035.0043.0019.0043.0051.0028.0051.0059.0031.0055.0063 45 T1000D T2000D T3000D 655-920 555-755 460-690 -P1 -P2 T400D -C1.0016.0031.0039.0016.0035.0043.0024.0047.0055.0028.0051.0059.0031.0055.0063 6 T1000D T2000D T3000D 490-755 460-655 360-525 -P1 -P2 T400D -C1.0016.0031.0039.0016.0035.0043.0024.0047.0055.0028.0051.0059.0031.0055.0063 7 T1000D T250D T3000D 330-525 265-395 295-460 -P1 -P2 T400D -C1.0016.0024.0031.0016.0031.0039.0016.0039.0047.0024.0047.0055.0028.0051.0059 89 T2000D T3000D 460-655 460-590 -P1 -P2 T400D -C1.0016.0024.0031.0016.0028.0035.0016.0039.0047.0019.0043.0051.0024.0047.0055 10 T250D T3000D 395-460 395-525 -P1 -P2 T400D -C1.0016.0024.0031.0016.0024.0031.0016.0028.0035.0016.0031.0039.0016.0035.0043 11 T250D T3000D 295-330 330-425 -P1 -P2 T400D -C1.0016.0024.0031.0016.0024.0031.0016.0028.0035.0016.0031.0039.0016.0035.0043 12 T1000D T2000D 720-985 655-820 -P1 -P2 T400D -C1.0028.0043.0051.0035.0051.0059.0047.0063.0071.0055.0071.0079.0063.0079.0087 1314 T1000D T2000D 625-755 490-655 -P1 -P2 T400D -C1.0019.0039.0047.0019.0043.0051.0031.0055.0063.0043.0067.0075.0047.0071.0079 15 T1000D T2000D T3000D 460-590 395-460 295-395 -P1 -P2 T400D -C1.0016.0024.0031.0016.0028.0035.0016.0039.0047.0024.0047.0055.0031.0055.0063 16 T250D T3000D 720-1315 820-1475 -P1 T400D -C1.0019.0039.0047.0019.0043.0051.0031.0055.0063.0043.0067.0075.0047.0071.0079 17 T250D T3000D 490-1050 555-1150 -P1 T400D -C1.0019.0039.0047.0019.0043.0051.0031.0055.0063.0043.0067.0075.0047.0071.0079 Tool life Inserts should not be used with flank wear exceeding 0.008-0.016" (0.20.4 mm) measured at the largest point. Cutting speed recommendations above are based upon peripheral insert tool life of 23 feet (7 m) drilled hole or (2030 minutes). 227

228 Perfo_Cutdata2.fm Page 228 Thursday, February 11, 2010 3:25 PM Perfomax Cutting data for superalloys Selection of inserts and cutting data Superalloys The recommendations are only valid for SD502 (2 x D), SD503 (3 x D) and SD542 (2.5 x D). 1. The machinability of the actual material is given in the tables on page 272. 2. Start values for cutting speed are marked bold. Cutting data for superalloys v c Recommended cutting speed vc (sf/min) Periphery geometry/grade Center geometry/grade Machinability.594-.709*.750-.870 Feed f (inch/rev) for drill diameter.910-1.10 1.102-1.339 1.378-1.732 1.772-2.323 2.559 2.756-3.150 60 345-380-410 P1 T250D C1 T400D.0039.0059.0071.0078.0087.0098.0078.0087 55 330-360-395 P1 T250D C1 T400D.0039.0059.0071.0078.0087.0098.0078.0087 50 295-330-360 P1 T250D C1 T400D.0039.0059.0071.0078.0087.0098.0078.0087 45 280-310-345 P1 T250D C1 T400D.0039.0059.0071.0078.0087.0098.0078.0087 40 265-295-330 P1 T250D C1 T400D.0039.0059.0071.0078.0087.0098.0078.0087 35 165-200-230 P1 T250D C1 T400D.0024.0027.0035.0043.0051.0060.0043.0051 30 150-180-215 P1 T250D C1 T400D.0024.0027.0035.0043.0051.0060.0043.0051 25 130-165-200 P1 T250D C1 T400D.0024.0027.0035.0043.0051.0060.0043.0051 20 100-135-165 P1 T250D C1 T400D.0024.0027.0035.0043.0051.0060.0043.0051 15 65-100-130 P1 T250D C1 T400D.0024.0027.0035.0043.0051.0060.0043.0051 10 65-80-100 P1 T250D C1 T400D 0,05.0024.0027.0031.0035.0043.0031.0035 5 30-50-65 P1 T250D C1 T400D 0,05.0024.0027.0031.0035.0043.0031.0035 * For drill diameter 0.594-0.750 periphery geometry - P2 should be used. Perfomax Cutting data for superalloys 228

229-234 Precimaster.fm Page 229 Friday, February 12, 2010 8:41 AM Precimaster Heads/Shanks Heads for blind and through holes.1476" to.3937" (3.75 to 10 mm) Precimaster Heads/Shanks Heads for through holes (can also be used for blind bore: Reaming depth Max 1 x D, V c reduced 50-80 %) Geometry Grades Head PM20 Dia. D c inch (mm) Drill size* l 1s dm m inch (mm) l 4 D 5m Body size inch version.1873/.1874.181 PM20-01870/01875-EB.. 4 1.496.315 (8).866.570 PM08B-XX [ [.1880/.1881.185 PM20-01877/01882-EB.. 4 1.496.315 (8).866.570 PM08B-XX [ [.2497/.2499.248 PM20-02494/02500-EB.. 4 1.496.315 (8).866.570 PM08B-XX [ [.2505/.2507.247 PM20-02502/02508-EB.. 4 1.496.315 (8).866.570 PM08B-XX [ [.3122/.3124.307 PM20-03119/03125-EB.. 4 1.496.315 (8).866.570 PM08B-XX [ [.3130/.3132.307 PM20-03127/03133-EB.. 4 1.496.315 (8).866.570 PM08B-XX [ [ EB45 EB845 EB25 H15 CP20 RX2000 RX1500 mm version.157 ( 4).153 PM20-04H7-EB.. 4 1.496.315 (8).866.571 PM08B-XX [ [ ] ] [.197 ( 5).193 PM20-05H7-EB.. 4 1.496.315 (8).866.571 PM08B-XX [ [ ] ] [.236 (6).232 PM20-06H7-EB.. 4 1.496.315 (8).866.571 PM08B-XX [ [ ] ] [.276 ( 7).272 PM20-07H7-EB.. 4 1.496.315 (8).866.571 PM08B-XX [ [ ] ] [.315 ( 8).311 PM20-08H7-EB.. 4 1.496.315 (8).866.571 PM08B-XX [ [ ] ] [.354 ( 9).350 PM20-09H7-EB.. 4 1.496.315 (8).866.571 PM08B-XX [ [ ] ] [.394 (10 ).386/.390 PM20-10H7-EB.. 4 1.496.315 (8).866.571 PM08B-XX [ [ ] ] [ Intermediate diameters.1476-.3937 PM20-XXX±XXX-E.. 4 1.496.315 (8).866.571 PM08B-XX ] ] ] ] ] * For further information on drill range see 2008 MN Holemaking page 15. Heads for blind holes PM25.157 (4).153 PM25-04H7-EB.. 4 1.496.315 (8).866.571 PM08B-XX [ [ ] ] [.197 (5).193 PM25-05H7-EB.. 4 1.496.315 (8).866.571 PM08B-XX [ [ ] ] [.236 (6).232 PM25-06H7-EB.. 4 1.496.315 (8).866.571 PM08B-XX [ [ ] ] [.276 (7).272 PM25-07H7-EB.. 4 1.496.315 (8).866.571 PM08B-XX [ [ ] ] [.315 (8).311 PM25-08H7-EB.. 4 1.496.315 (8).866.571 PM08B-XX [ [ ] ] [.354 (9).350 PM25-09H7-EB.. 4 1.496.315 (8).866.571 PM08B-XX [ [ ] ] [.394 (10).386/.390 PM25-10H7-EB.. 4 1.496.315 (8).866.571 PM08B-XX [ [ ] ] [ Intermediate diameters.1476-.3937 PM25-XXX±XXX-E.. 4 1.496.315 (8).866.571 PM08B-XX ] ] ] ] ] [= Stock standard, ] = Non Stock standard. Subject to change refer to current price and stock-list. Note: When ordering Precimaster reamers for intermediate diameters, please state diameter and tolerance of hole to be reamed. Ordering example: PM20-.250"+.0004"-EB45 CP20 (PM20-08.515 P7-EB45 CP20). 229

229-234 Precimaster.fm Page 230 Friday, February 12, 2010 8:41 AM Precimaster Heads/Shanks Heads for through holes.3748" to 1.5157" (9.520 to 38.449 mm) Heads for through holes (can also be used for blind bore: Reaming depth Max 1 x D, Vc reduced 50-80 %) Geometry Grades Dia. D c d Head inch Drill size* a inch (mm) Body size PM50.3747 / 3749.367 /.371 PM50-03744/03750-EB.. 4.354.236 (6) PM06-XX [ [.3755 / 3757.367 /.371 PM50-03752/03758-EB.. 4.354.236 (6) PM06-XX [ [.4371 /.4374.430 /.434 PM50-04368/04375-EB.. 4.472.276 (7) PM07-XX [ [.4380 /.4383.430 /.434 PM50-04377/04384-EB.. 4.472.276 (7) PM07-XX [ [.4996 /.4999.492 /.496 PM50-04993/05000-EB.. 4.472.276 (7) PM07-XX [ [.5005 /.5008.492 /.496 PM50-05002/05009-EB.. 4.472.276 (7) PM07-XX [ [.6246 /.6249.616 /.620 PM50-06243/06250-EB.. 4.472.276 (7) PM07-XX [ [.6255 /.6258.616 /.620 PM50-06252/06259-EB.. 4.472.276 (7) PM07-XX [ [.7496 /.7499.742 /.746 PM50-07492/07500-EB.. 6.512.315 (8) PM08-XX [ [.7506 /.7509.742 /.746 PM50-07502/07510-EB.. 6.512.315 (8) PM08-XX [ [.8746 /.8749.866 /.870 PM50-08742/08750-EB.. 6.630.433 (11) PM11-XX [ [.8756 /.8759.866 /.870 PM50-08752/08760-EB.. 6.630.433 (11) PM11-XX [ [.9996 /.9999.992 /.996 PM50-09992/10000-EB.. 6.630.433 (11) PM11-XX [ [ 1.0006 / 1.0009.992 /.996 PM50-10002/10010-EB.. 6.630.433 (11) PM11-XX [ [ 1.1256 / 1.1259 1.118 / 1.122 PM50-11252/11260-EB.. 6.787.590 (15) PM15-XX [ [ 1.2507 / 1.2510 1.243 / 1.247 PM50-12502/12512-EB.. 6.787.590 (15) PM15-XX [ [ EB45 EB845 EB25 H15 CP20 RX2000 RX1500 * For further information on drill range see 2008 MN Holemaking page 15. [ = Stock standard, ] = Non Stock standard. Subject to change refer to current price and stock-list. Note: When ordering Precimaster reamers for intermediate diameters, please state diameter and tolerance of hole to be reamed. Ordering example: PM50-.500"±.0004"-EB845 CP20. 230

229-234 Precimaster.fm Page 231 Friday, February 12, 2010 8:41 AM Precimaster Heads/Shanks Heads for through holes.3748" to 1.5157" (9.520 to 38.449 mm) Heads for through holes (can also be used for blind bore: Reaming depth Max 1 x D, Vc reduced 50-80 %) Geometry Grades Dia. D c d Head inch (mm) Drill size* a inch (mm) Body size PM50.394 (1 0).386/.390 PM50-10H7-EB.. 4.354.236 (6) PM06-XX [ [ ] ] [ ] ].433 (11).425/.429 PM50-11H7-EB.. 4.354.236 (6) PM06-XX [ [ ] ] [ ] ].472 (12).465/.469 PM50-12H7-EB.. 4.472.276 (7) PM07-XX [ [ ] ] [ ] ].512 (1 3).504/.508 PM50-13H7-EB.. 4.472.276 (7) PM07-XX [ [ ] ] [ ] ].551 (1 4).543/.547 PM50-14H7-EB.. 4.472.276 (7) PM07-XX [ [ ] ] [ ] ].590 (15).583/.587 PM50-15H7-EB.. 4.472.276 (7) PM07-XX [ [ ] ] [ ] ].630 (1 6).622/.626 PM50-16H7-EB.. 6.512.315 (8) PM08-XX [ [ ] ] [ ] ].669 (17).661/.665 PM50-17H7-EB.. 6.512.315 (8) PM08-XX [ [ ] ] [ ] ].709 (18).701/.705 PM50-18H7-EB.. 6.512.315 (8) PM08-XX [ [ ] ] [ ] ].748 (19).740/.744 PM50-19H7-EB.. 6.512.315 (8) PM08-XX [ [ ] ] [ ] ].787 (2 0).780/.783 PM50-20H7-EB.. 6.512.315 (8) PM08-XX [ [ ] ] [ ] ].827 (2 1).819/.823 PM50-21H7-EB.. 6.512.315 (8) PM08-XX [ [ ] ] [ ] ].866 (2 2).858/.862 PM50-22H7-EB.. 6.630.433 (11) PM11-XX [ [ ] ] [ ] ].905 (2 3).898/.902 PM50-23H7-EB.. 6.630.433 (11) PM11-XX [ [ ] ] [ ] ].945 (2 4).938/.941 PM50-24H7-EB.. 6.630.433 (11) PM11-XX [ [ ] ] [ ] ].984 (2 5).976/.980 PM50-25H7-EB.. 6.630.433 (11) PM11-XX [ [ ] ] [ ] ] 1.024 (26) 1.016/1.020 PM50-26H7-EB.. 6.630.433 (11) PM11-XX [ [ ] ] [ ] ] 1.063 (27) PM50-27H7-EB.. 6.787.590 (15) PM15-XX [ [ ] ] [ ] ] 1.102 (28) PM50-28H7-EB.. 6.787.590 (15) PM15-XX [ [ ] ] [ ] ] 1.142 (29) PM50-29H7-EB.. 6.787.590 (15) PM15-XX [ [ ] ] [ ] ] 1.181 (30) PM50-30H7-EB.. 6.787.590 (15) PM15-XX [ [ ] ] [ ] ] 1.220 (31) PM50-31H7-EB.. 6.787.590 (15) PM15-XX [ [ ] ] [ ] ] 1.260 (32) PM50-32H7-EB.. 6.787.590 (15) PM15-XX [ [ ] ] [ ] ] Intermediate diameters.3748-.4527 PM50-XXX±XXX-EB.. 4.354.236 (6) PM06-XX ] ] ] ] ] ] ].4528-.6102 PM50-XXX±XXX-EB.. 4.472.276 (7) PM07-XX ] ] ] ] ] ] ].6102-.8464 PM50-XXX±XXX-EB.. 6.512.315 (8) PM08-XX ] ] ] ] ] ] ].8465-1.0433 PM50-XXX±XXX-EB.. 6.630.433 (11) PM11-XX ] ] ] ] ] ] ] 1.0433-1.5157 PM50-XXX±XXX-EB.. 6.787.590 (15) PM15-XX ] ] ] ] ] ] ] EB45 EB845 EB25 H15 CP20 CF C200R * For further information on drill range see 2008 MN Holemaking page 15. [ = Stock standard, ] = Non Stock standard. Subject to change refer to current price and stock-list. Note: When ordering Precimaster reamers for intermediate diameters, please state diameter and tolerance of hole to be reamed. Ordering example: PM50-.500"±.0004"-EB845 CP20. 231

229-234 Precimaster.fm Page 232 Friday, February 12, 2010 8:41 AM Precimaster Heads/Shanks Heads for blind holes.3748" to 1.5157" (9.520 to 38.499 mm) Geometry Grades Dia. D c d Head inch (mm) Drill size* a inch (mm) Body size PM55.3747 / 3749.367 /.371 PM55-03744/03750-EB.. 4.354.236 (6) PM06-XX [ [.3755 / 3757.367 /.371 PM55-03752/03758-EB.. 4.354.236 (6) PM06-XX [ [.4371 /.4374.430 /.434 PM55-04368/04375-EB.. 4.472.276 (7) PM07-XX [ [.4380 /.4383.430 /.434 PM55-04377/04384-EB.. 4.472.276 (7) PM07-XX [ [.4996 /.4999.492 /.496 PM55-04993/05000-EB.. 4.472.276 (7) PM07-XX [ [.5005 /.5008.492 /.496 PM55-05002/05009-EB.. 4.472.276 (7) PM07-XX [ [.6246 /.6249.616 /.620 PM55-06243/06250-EB.. 4.472.276 (7) PM07-XX [ [.6255 /.6258.616 /.620 PM55-06252/06259-EB.. 4.472.276 (7) PM07-XX [ [.7496 /.7499.742 /.746 PM55-07492/07500-EB.. 6.512.315 (8) PM08-XX [ [.7506 /.7509.742 /.746 PM55-07502/07510-EB.. 6.512.315 (8) PM08-XX [ [.8746 /.8749.866 /.870 PM55-08742/08750-EB.. 6.630.433 (11) PM11-XX [ [.8756 /.8759.866 /.870 PM55-08752/08760-EB.. 6.630.433 (11) PM11-XX [ [.9996 /.9999.992 /.996 PM55-09992/10000-EB.. 6.630.433 (11) PM11-XX [ [ 1.0006 / 1.0009.992 /.996 PM55-10002/10010-EB.. 6.630.433 (11) PM11-XX [ [ EB45 EB845 EB25 H15 CP20 RX2000 RX1500 * For further information on drill range see 2008 MN Holemaking page 15. [ = Stock standard, ] = Non Stock standard. Subject to change refer to current price and stock-list. Note: When ordering Precimaster reamers for intermediate diameters, please state diameter and tolerance of hole to be reamed. Ordering example: PM55-.500"±.0004"-EB845 CP20. 232

229-234 Precimaster.fm Page 233 Friday, February 12, 2010 8:41 AM Precimaster Heads/Shanks Heads for blind holes.3748" to 1.5157" (9.520 to 38.499 mm) Geometry Grades Dia. D c d Head inch (mm) Drill size* a inch (mm) Body size PM55.394 (10).386/.390 PM55-10H7-EB.. 4.354.236 (6) PM06B-XX [ [ ] ] [ ] ].433 (1 1).425/.429 PM55-11H7-EB.. 4.354.276 (7) PM06B-XX [ [ ] ] [ ] ].472 (1 2).465/.469 PM55-12H7-EB.. 4.472.276 (7) PM07B-XX [ [ ] ] [ ] ].512 (1 3).504/.508 PM55-13H7-EB.. 4.472.276 (7) PM07B-XX [ [ ] ] [ ] ].551 (1 4).543/.547 PM55-14H7-EB.. 4.472.276 (7) PM07B-XX [ [ ] ] [ ] ].590 (15).583/.587 PM55-15H7-EB.. 4.472.276 (7) PM07B-XX [ [ ] ] [ ] ].630 (1 6).622/.626 PM55-16H7-EB.. 6.512.315 (8) PM08B-XX [ [ ] ] [ ] ].669 (1 7).661/.665 PM55-17H7-EB.. 6.512.315 (8) PM08B-XX [ [ ] ] [ ] ].709 (1 8).701/.705 PM55-18H7-EB.. 6.512.315 (8) PM08B-XX [ [ ] ] [ ] ].748 (1 9).740/.744 PM55-19H7-EB.. 6.512.315 (8) PM08B-XX [ [ ] ] [ ] ].787 (20).780/.783 PM55-20H7-EB.. 6.512.315 (8) PM08B-XX [ [ ] ] [ ] ].827 (21).819/.823 PM55-21H7-EB.. 6.512.315 (8) PM08B-XX [ [ ] ] [ ] ].866 (2 2).858/.862 PM55-22H7-EB.. 6.630.433 (11) PM11B-XX [ [ ] ] [ ] ].905 (2 3).898/.902 PM55-23H7-EB.. 6.630.433 (11) PM11B-XX [ [ ] ] [ ] ].945 (2 4).938/.941 PM55-24H7-EB.. 6.630.433 (11) PM11B-XX [ [ ] ] [ ] ].984 (2 5).976/.980 PM55-25H7-EB.. 6.630.433 (11) PM11B-XX [ [ ] ] [ ] ] 1.024 (26) 1.016/1.020 PM55-26H7-EB.. 6.630.433 (11) PM11B-XX [ [ ] ] [ ] ] 1.063 (27) PM55-27H7-EB.. 6.787.590 (15) PM15B-XX [ [ ] ] [ ] ] 1.102 (28) PM55-28H7-EB.. 6.787.590 (15) PM15B-XX [ [ ] ] [ ] ] 1.142 (29) PM55-29H7-EB.. 6.787.590 (15) PM15B-XX [ [ ] ] [ ] ] 1.181 (30) PM55-30H7-EB.. 6.787.590 (15) PM15B-XX [ [ ] ] [ ] ] 1.220 (31) PM55-31H7-EB.. 6.787.590 (15) PM15B-XX [ [ ] ] [ ] ] 1.260 (32) PM55-32H7-EB.. 6.787.590 (15) PM15B-XX [ [ ] ] [ ] ] EB45 EB845 EB25 H15 CP20 CF C200R Intermediate diameters.3748-.4527 PM55-XXX±XXX-EB.. 4.354.236 (6) PM06B-XX ] ] ] ] ] ] ].4528-.6102 PM55-XXX±XXX-EB.. 6.472.276 (7) PM07B-XX ] ] ] ] ] ] ].6102-.8464 PM55-XXX±XXX-EB.. 6.512.315 (8) PM08B-XX ] ] ] ] ] ] ].8465-1.0433 PM55-XXX±XXX-EB.. 6.630.433 (11) PM11B-XX ] ] ] ] ] ] ] 1.0433-1.5157 PM55-XXX±XXX-EB.. 6.787.590 (15) PM15B-XX ] ] ] ] ] ] ] * For further information on drill range see 2008 MN Holemaking page 15. [ = Stock standard, ] = Non Stock standard. Subject to change refer to current price and stock-list. Note: When ordering Precimaster reamers for intermediate diameters, please state diameter and tolerance of hole to be reamed. Ordering example: PM55-.500"±.0004"-EB845 CP20. 233

229-234 Precimaster.fm Page 234 Friday, February 12, 2010 8:41 AM Precimaster Geometry choice Applications EB45 Chip control +++ Surface Finish + (R a 32-48 μin) Verstatile EB845 Chip control ++ Surface Finish +++ (R a 8-32 μin) EB25 Chip control + Surface finish ++ (R a 16-32 μin) Feed performance +++ Precimaster Geometry choice 234

Precimaster Cutting Data Cutting data The recommended start values for general applications are marked bold. In case of a new reaming application, we recommend to use lower cutting data range values for initial cuts. Cutting data to be increased gradually for optimization. When using a Long range toolholder, reduce cutting speed values by 50-80%. Seco Material Group No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 20 21 22 Geometry Cutting Speed sf/min Feed f in/rev for reamer diameter inch Machining allowance on Ø RX2000 RX1500 4 teeth 6 teeth Reamer Ø inch Ø.157-.354 Ø.394-.590 Ø.630-2.362.157-.354.394-.590.630-2.362 EB45 395-525-655 395-720-985.004-.006-.008.008-.012-.024.010-.020-.035 EB845 EB25 395-525-655 395-720-985.010-.020-.035.020-.031-.047.031-.047-.071 EB45 395-525-655 395-720-985.004-.006-.008.008-.012-.024.010-.020-.035 EB845.004-.006.004-.008.004-.012 EB25 395-525-655 395-720-985.010-.020-.035.020-.031-.047.031-.047-.071 EB45 395-525-655 395-720-985 EB845.004-.006-.008.008-.012-.024.010-.020-.035 EB25 395-525-655 395-720-985.010-.020-.035.020-.031-.047.031-.047-.071 EB45 265-395-525 295-590-655 EB845 195-265-330.004-.006-.008.006-.008-.016.008-.012-.024 EB25 265-395-525 295-590-655.010-.016-.028.016-.024-.035.024-.035-.053 EB45 265-330-395 330-395-490.004-.006-.008.006-.008-.016.008-.012-.024 EB845 195-265-330.004-.006.004-.008.004-.010 EB25 265-330-395 330-395-490.010-.016-.028.016-.024-.035.024-.035-.053 EB45 165-215-265 EB845 130-165-230.004-.006-.008.006-.008-.016.008-.012-.024 EB25 EB45 100-130-165.003-.004-.006.004-.008-.012.006-.012-.016 EB845 EB25 EB45 100-130-230.004-.006-.008.006-.008-.016.008-.012-.024 EB845 EB25 100-130-230.010-.016-.028.016-.024-.035.024-.035-.053 EB45 100-130-165.004-.006-.008.006-.008-.016.008-.012-.024 EB845.003-.004.004-.006.004-.008 EB25 EB45 100-130-230.004-.006-.008.006-.008-.016.008-.012-.024 EB845 EB25 EB45 100-130-230.004-.006-.008.006-.008-.016.008-.012-.024 EB845 EB25 EB45 330-460-655 EB845 265-330-395.004-.006-.010.006-.012-.018.010-.020-.026 EB25 330-460-655.010-.020-.035.020-.031-.071.031-.047-.087 EB45 330-395-590 EB845 265-330-395.004-.006-.010.006-.012-.018.010-.020-.026 EB25 330-395-590.010-.020-.035.020-.031-.071.031-.047-.087.004-.006.004-.008.004-.012 EB45 265-330-395 395-590-785.004-.006-.010.006-.012-.018.010-.020-.026 EB845 195-230-395 EB25 265-330-395 395-590-785.010-.020-.035.020-.031-.071.031-.047-.087 EB45 195-265-330 195-395-655 EB845 130-195-265.004-.006-.010.006-.012-.018.010-.020-.026 EB25 195-265-330 195-395-655.010-.020-.035.020-.031-.047.031-.047-.071 EB45.006-.008-.012.010-.020-.026.020-.026-.039 EB845 EB25.010-.020-.039.020-.031-.071.031-.047-.087 EB45.006-.008-.012.010-.020-.026.020-.026-.039.004-.008.004-.008.004-.012 EB845 EB25.010-.020-.039.020-.031-.071.031-.047-.087 EB45 100-165-195.003-.004-.006.004-.008-.012.006-.012-.016.003-.004.004-.006.004-.008 EB845 EB25 EB45 100-165-195.003-.004-.006.004-.008-.012.006-.012-.016.003-.004.004-.006.004-.008 EB845 EB25 EB45 130-195-265 EB845.003-.004-.006.004-.008-.012.006-.012-.016.003-.004.004-.006.004-.008 EB25 235 235 Preci Data.indd 235 2/12/2010 7:53:05 AM

236-258 XFIX.fm Page 236 Thursday, February 11, 2010 3:36 PM Xfix Productivity and precision for large diameters with Seco Xfix Cost effectiveness: Indexable inserts 8 cutting edges Multi-teeth for high feed performance Flexibility: 3 toolholders to cover 1.5748-6.0630" (40-154 mm) diameter range Insert geometries for different applications Extension range for long reach applications Accuracy: Adjustable for maximum precision (IT6) Stable clamping system Integrated run-out adapter Pre-loaded guiding pads Xfix 236

236-258 XFIX.fm Page 237 Thursday, February 11, 2010 3:36 PM Xfix Tooling overview Diameter inch Diameter mm Max dia./length ratio 1.555-2.146 39.5-59.499 6.5 x D 2.343-3.327 59.5-84.499 4.5 x D 3.366-4.705 85.5-119.499 3.3 x D 4.705-6.083 119,5-154,499 2.5 x D Note: For diameters > 3.394" (100 mm) or L > 3 x D check max tool weight acceptable in the machine. Xfix Tooling overview 237

236-258 XFIX.fm Page 238 Thursday, February 11, 2010 3:36 PM Xfix Range overview Xfix Range Reaming depth Hole tolerance Intermediate diameters Surface finish Xfix 1.555" 6.083" (39.500 154.500 mm) 2.56.5 x D IT 6 X R a 3248 μin Page - Xfix is a specially developed Seco Reaming program, dedicated for large diameters 1.5551" to 6.0827" (39.5 to 154.5 mm). Design includes adjustable and indexable inserts to achieve IT 6 accurate tolerance, as well as a built in adjustable run-out adapter to guarantee component quality. Multi-teeth construction and patented pre-loaded guiding pads offering maximum stability and productivity for large diameter reaming operations. Xfix Range overview 238

236-258 XFIX.fm Page 239 Thursday, February 11, 2010 3:36 PM Xfix Features details - 8 cutting edges for economy - Stable clamping system - Easy adjustment with 1 adjusting screw for easy setting - Grade and geometry choice for different applications - Patended pre-loaded guiding pads system for application stability - Pads lubrication for performance and safety - Integrated adjustable adapter for perfect run-out control - Shanks and extension program from Seco - System catalog illustrates maximum modularity Xfix Features details 239

236-258 XFIX.fm Page 240 Thursday, February 11, 2010 3:36 PM Xfix Code key Code key Adapters Flange size D Length L Shank type Code key Standard heads Head type Diameter and tolerance Number of teeth Flange size D Code key Intermediate diameter heads Head type Diameter & tolerance Number of teeth Flange size D Intermediate diameters example: metric 19.475/19.502 metric19.415+10/-12 Inches 1.4848/1.4858 Code key Inserts Insert size Lead geometry Rake angle Grade: Xfix Code key 240

236-258 XFIX.fm Page 241 Thursday, February 11, 2010 3:36 PM Xfix Insert Xfix Insert for 1.5551 to 6.0827" (39.5 to 154.499) RNAX Dia. D c (inch) Blade type D s h RX2000 RX1500 Rake Insert clamping screw 2.3425... RNAX1005.394.216.138 [ [ 3 C03010-T09P...6.0826 Lead geometries Grades RX2000 High performance coated carbide grade suitable for all materials RX1500 -Wear resistant coated cermet grade for performance optimization in steel and cast iron 241

236-258 XFIX.fm Page 242 Thursday, February 11, 2010 3:36 PM Xfix Geometry choice Applications Chip control +++ Surface finish + 3248 μinch First choice for geometry Chip control ++ Surface finish 832 μinch Chip control ++ Surface finish + 3248 μinch Stability for long reach application +++ Xfix Geometry choice 242

236-258 XFIX.fm Page 243 Thursday, February 11, 2010 3:36 PM Xfix Heads/Shanks Heads for diameters 1.5551-2.3425" (39.5-59.499) Xfix Heads/Shanks For inserts, see page 241 Geometries Grade max Dia. Dc (inch) Dia. D c (mm) A D Insert type EB45 EB845 EB1570 RX2000 RX1500 1.5551-1.7519 39.5-44.499 HF85-...-03-32 3 1.299 1.259 0.9 RNAX1005... 1.7519-1.9488 44.5-49.499 HF85-...-03-32 3 1.299 1.259 1.1 RNAX1005... 1.9488-2.1456 49.5-54.499 HF85-...-03-32 3 1.299 1.259 1.4 RNAX1005... 2.1456-2.3425 54.5-59.499 HF85-...-03-32 3 1.299 1.259 1.6 RNAX1005... [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ Spare Parts Insert clamping screw Cartridge clamping screw Cylindrical cartridge Clamping wedge Cartridge adjusting screw Adapter adjusting screw C03010-T09P LDH4010 CARTCY-HF16 B6027 SD4075S HcM4 x 08 T00-09P20 H2.0-2D H2.0-2D 2.0SMS795 clamping torque (in/lbs) clamping torque (in/lbs) 17.7 26.6 243

236-258 XFIX.fm Page 244 Thursday, February 11, 2010 3:36 PM Xfix Heads/Shanks Seco Capto shank for diameters 1.5551-2.3425" (39.5-59.499) D A A inch Custom design A min A max Taper D max Reamer holders HF32-050-C3 [ 1.9685 - - C3 1.259 0.66 HF32-...HSKA63 ] - 2.559 9.645 HSK-A63 1.259 - HF32-...HSKA80 ] - 3.934 8.228 HSK-A80 1.259 - HF32-...HSKA100 ] - 2.755 9.645 HSK-A100 1.259 - HF32-...DIN40 ADB ] - 2.362 9.921 ISO40 ADB 1.259 - HF32-...DIN50 ADB ] - 2.362 12.48 ISO50 ADB 1.259 - HF32-...BT40 ADB ] - 2.559 9.921 BT40 ADB 1.259 - HF32-...BT50 ADB ] - 2.953 12.48 BT50 ADB 1.259 - Shanks and extensions for HF32-050-C3 (see Seco Capto catalog for more details). Seco max A Capto Shanks inch Taper size C3-390.410-63075C [ 2.953 HSK-A63 C3 3 C3-390.410-10080A [ 3.149 HSK-A100 C3 8.4 C3-390.140-40030 [ 1.181 DIN40 AD C3 1.8 C3-390.140-40060 [ 2.362 DIN40 AD C3 6.2 C3-390.272-40030 [ 1.181 DIN40 B C3 1.8 C3-390.272-40060 [ 2.362 DIN40 B C3 2.2 C3-390.540-40030 [ 1.181 DIN40 AD C3 2 C3-390.55-40030 [ 1.181 BT40 AD C3 2.2 C3-390.55-40060 [ 2.362 BT40 AD C3 2.6 C3-390.369-40030 [ 1.181 BT40 B C3 2.2 C3-390.555-40030 [ 1.181 BT40 AD C3 2.2 C3-390.140-50030 [ 1.181 DIN50 AD C3 5.7 C3-390.140-50060 [ 2.362 DIN50 AD C3 6.2 C3-390.272-50030 [ 1.181 DIN50 B C3 5.7 C3-390.272-50060 [ 2.362 DIN50 B C3 6.2 C3-390.540-50030A [ 1.181 DIN50 ADB C3 6.2 C3-390.58-50040 [ 1.575 BT50 AD C3 5.5 C3-390.58-50070 [ 2.756 BT50 AD C3 6 C3-390.369-50040 [ 1.575 BT50 B C3 5.5 Shank C3-391.01-32060A [ 2.362 C3 C3 0.9 C3-391.01-32080A [ 3.149 C3 C3 1.1 C4-391.02-32055A [ 2.165 C4 C3 1.1 C4-391.02-32070A [ 2.756 C4 C3 1.3 C5-391.02-32060A [ 2.362 C5 C3 1.5 C6-391.02-32070A [ 2.756 C6 C3 2.4 C8-391.02-32060A [ 2.362 C8 C3 3.7 C3-391.01-32035 [ 1.378 C3 C3 4.4 C5-391.02-32033 [ 1.299 C5 C3 1.1 C6-391.01-32032 [ 1.260 C6 C3 2 [= Stock standard, ]= Non Stock standard. Subject to change refer to current price and stock-list. See Seco Capto catalog. Extension 244

236-258 XFIX.fm Page 245 Thursday, February 11, 2010 3:36 PM Xfix Heads/Shanks Graflex shank for diameters 1.5551-2.3425" (39.5-59.499) D A A inch Custom design A min A max Taper D max Reamer holders HF32-050-G3 [ 1.969 - - Graflex 3 32 0.66 HF32-...HSKA63 ] - 2.559 9.645 HSK-A63 32 - HF32-...HSKA80 ] - 3.934 8.228 HSK-A80 32 - HF32-...HSKA100 ] - 2.755 9.645 HSK-A100 32 - HF32-...DIN40 ADB ] - 2.362 9.921 DIN40 ADB 32 - HF32-...DIN50 ADB ] - 2.362 12.48 DIN50 ADB 32 - HF32-...BT40 ADB ] - 2.559 9.921 BT40 ADB 32 - HF32-...BT50 ADB ] - 2.953 12.48 BT50 ADB 32 - Shanks and extensions for HF32-050-G3 (see Seco Tooling System catalog for more details). Seco max A Graflex Shanks inch Taper size EM9304 401 1850 [ 1.969 HSK-A63 3 1.8 EM9306 401 1855 [ 2.165 HSK-A100 3 4.2 EM3469 401 1835 [ 1.378 DIN40 AD 3 1.8 EM3469 401 18100 [ 3.394 DIN40 AD 3 2 EM4466 401 1835 [ 1.378 DIN40 AD/ 3 1.9 EM3414 401 1840 [ 1.575 BT40 ADB 3 2.2 EM3414 401 18100 [ 3.394 BT40 ADB 3 3 EM3471 401 1835 [ 1.378 DIN50 ADB 3 6.2 EM3471 401 18100 [ 3.394 DIN50 ADB 3 6.4 EM3416 401 1845 [ 1.772 BT50 ADB 3 8.8 EM3416 401 18120 [ 4.724 BT50 ADB 3 9 Shank M402 330 [ 1.575 Graflex 3 3 0.55 M402 331 [ 2.362 Graflex 3 3 0.9 Extension [= Stock standard, ]= Non Stock standard. Subject to change refer to current price and stock-list. See Seco Capto catalog. 245

236-258 XFIX.fm Page 246 Thursday, February 11, 2010 3:36 PM Xfix Heads/Shanks Heads for diameters 2.3425-3.3267" (59.5-84.499) For inserts, see page 241 Geometries Grade max Dia. D c (inch) Dia. D c (mm) A D Insert type EB45 EB845 EB1570 RX2000 RX1500 2.3425-2.5393 59.5-64.499 HF85-...-05-55 5 1.969 2.165 2.9 RNAX1005... 2.5393-2.3819 64.5-69.499 HF85-...-05-55 5 1.969 2.165 3.3 RNAX1005... 2.3787-2.9330 65.5-74.499 HF85-...-05-55 5 1.969 2.165 3.9 RNAX1005... 2.9330-3.1299 74.5-79.499 HF85-...-05-55 5 1.969 2.165 4.4 RNAX1005... 3.1299-3.3267 79.5-84.499 HF85-...-05-55 5 1.969 2.165 4.9 RNAX1005... [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ Spare Parts Insert clamping screw Cartridge clamping screw Cylindrical cartridge Clamping wedge Cartridge adjusting screw Adapter adjusting screw C03010-T09P LHD4012 CARTCY-HF20 B6027 SH40275 HcM8 x 12 T00-09P20 H2.0-2D H2.0-2D 4.0SMS795 clamping torque (in/lbs) clamping torque (in/lbs) 17.7 26.6 Seco Capto shank for diameters 2.3425-3.3267" (59.5-84.499) 246

236-258 XFIX.fm Page 247 Thursday, February 11, 2010 3:36 PM Xfix Heads/Shanks D A A inch Custom design A min A max Taper D max Reamer holders HF55-080-C5 [ 3.150 - - C3 2.2 2.9 HF55-...HSKA63 ] - 3.150 9.409 HSK-A63 2.2 - HF55-...HSKA80 ] - 3.937 9.409 HSK-A80 2.2 - HF55-...HSKA100 ] - 3.937 9.409 HSK-A100 2.2 - HF55-...DIN69871/40 ] - 3.150 9.409 DIN69871/40 2.2 - HF55-...DIN69871/50 ] - 3.150 11.969 DIN69871/50 2.2 - HF55-...BT40 ] - 3.150 9.409 BT40 2.2 - HF55-...BT50 ] - 3.150 11.969 BT50 2.2 - Shanks and extensions for HF55-080-C5 (see Seco Capto catalog for more details). Seco max A Capto Shanks inch Taper size C5-390.410-63090C [ 3.543 HSK-A63 C5 3.1 C5-390.410-100100A [ 3.937 HSK-A100 C5 8.4 C5-390.140-40030 [ 1.181 DIN40 AD C5 1.8 C5-390.140-40070 [ 2.756 DIN40 AD C5 3.3 C5-390.272-40040 [ 1.575 DIN40 B C5 2.0 C5-390.272-40080 [ 3.150 DIN40 B C5 3.3 C5-390.540-40050 [ 1.969 DIN40 AD C5 2.4 C5-390.55-40030 [ 1.181 BT40 AD C5 2.0 C5-390.55-40070 [ 2.756 BT40 AD C5 3.3 C5-390.369-40050 [ 1.969 BT40 B C5 4.0 C5-390.555-40050 [ 1.969 BT40 AD C5 2.6 C5-390.140-50030 [ 1.181 DIN50 AD C5 5.7 C5-390.140-50070 [ 2.756 DIN50 AD C5 6.8 C5-390.272-50030 [ 1.181 DIN50 B C5 6.4 C5-390.272-50070 [ 2.756 DIN50 B C5 7.5 C5-390.540-50030A [ 1.181 DIN50 ADB C5 6.2 C5-390.58-50040 [ 1.575 BT50 AD C5 7.7 C5-390.58-50080 [ 3.150 BT50 AD C5 8.8 C5-390.369-50040 [ 1.575 BT50 B C5 7.0 C5-390.558-50040 [ 1.575 BT50 AD C5 7.7 Shank Extension C5-391.01-50050 [ 1.969 C5 1.5 C5-391.01-50080A [ 3.150 C5 C5 2.4 C5-391,01-50100A [ 3.937 C5 C5 3.1 C5-391,02-50050 [ 1.969 C6 C5 2.2 C6-391.02-50080A [ 3.150 C6 C5 3.3 C6-391.02-50110A [ 4.331 C6 C5 4.8 C8-391.02-50045 [ 1.772 C8 C5 4.2 C8-391-02-50080A [ 3.150 C8 C5 5.1 [= Stock standard, ]= Non Stock standard. Subject to change refer to current price and stock-list. See Seco Capto catalog. 247

236-258 XFIX.fm Page 248 Thursday, February 11, 2010 3:36 PM Xfix Heads/Shanks Graflex shank for diameters 2.3425-3.3267" (59.5-84.499) D A A inch Custom design A min A max Taper D max Reamer holders HF55-080-G5 [ 3.150 - - Graflex 5 2.2 2.9 HF55-...HSKA63 ] - 3.150 9.409 HSK-A63 2.2 - HF55-...HSKA80 ] - 3.937 9.409 HSK-A80 2.2 - HF55-...HSKA100 ] - 3.937 9.409 HSK-A100 2.2 - HF55-...DIN69871/40 ] - 3.150 9.409 DIN69871/40 2.2 - HF55-...DIN69871/50 ] - 3.150 11.969 DIN69871750 2.2 - HF55-...BT40 ] - 3.150 9.409 BT40 2.2 - HF55-...BT50 ] - 3.150 11.969 BT50 2.2 - Shanks and extensions for HF55-080-G5 (see Seco Tooling System catalog for more details). Seco max A Graflex Shanks inch Taper size EM9304 401 2860 [ 2.362 HSK-A63 5 2.2 EM9304 401 28100 [ 3.937 HSK-A63 5 3.3 EM9304 401 28140 [ 5.512 HSK-A63 5 5.0 EM9305 401 2860 [ 2.362 HSK-A80 5 3.2 EM9306 401 2865 [ 2.559 HSK-A100 5 5.1 EM9306 401 28110 [ 4.331 HSK-A100 5 6.6 EM9306 401 28150 [ 5.906 HSK-A100 5 7.9 EM3469 401 2840 [ 1.575 DIN40 ADB 5 1.8 EM3469 401 2880 [ 3.150 DIN40 ADB 5 3.4 EM3469 401 28120 [ 4.724 DIN40 ADB 5 4.6 EM4446 401 2840 [ 1.575 DIN40 AD/ 5 2.0 EM4446 401 2880 [ 3.150 DIN40 AD/ 5 3.2 EM4446 401 28120 [ 4.724 DIN40 AD/ 5 4.5 EM3414 401 2845 [ 1.772 BT40 ADB 5 2.4 EM3414 401 2880 [ 3.150 BT40 ADB 5 3.4 EM3414 401 28120 [ 4.724 BT40 ADB 5 4.6 EM3471 401 2840 [ 1.575 DIN50 ADB 5 6.3 EM3471 401 28100 [ 3.937 DIN50 ADB 5 8.4 EM4468 401 28140 [ 5.512 DIN50 ADB 5 9.4 EM4468 401 2840 [ 1.575 DIN50 AD/ 5 6.4 EM3416 401 28100 [ 3.937 DIN50 AD/ 5 8.8 EM4468 401 28140 [ 5.512 DIN50 AD/ 5 9.7 EM3416 401 2855 [ 2.165 BT50 ADB 5 8.3 EM3416 401 28100 [ 3.937 BT50 ADB 5 9.0 EM3416 401 28140 [ 5.512 BT50 ADB 5 10.3 Shank Extension M402 550 [ 1.969 Graflex 5 5 1.7 M402 551 [ 2.953 Graflex 5 5 2.5 M402 552 [ 3.937 Graflex 5 5 3.4 [= Stock standard, ]= Non Stock standard. Subject to change refer to current price and stock-list. See Seco Capto catalog. 248

236-258 XFIX.fm Page 249 Thursday, February 11, 2010 3:36 PM Xfix Heads/Shanks Heads for diameters 3.3267-4.7047" (84.5-119.499) For inserts, see page 241 Geometries Grade max Dia. D c (inch) Dia. D c (mm) A D Insert type EB45 EB845 EB1570 RX2000 RX1500 3.327-3.523 84.5-89.499 HF85-...-07-80 7 1.969 3.150 3.7 RNAX1005... 3.523-3.720 89.5-94.499 HF85-...-07-80 7 1.969 3.150 4.1 RNAX1005... 3.720-3.917 94.5-99.499 HF85-...-07-80 7 1.969 3.150 4.4 RNAX1005... 3.917-4.114 99.5-104.499 HF85-...-07-80 7 1.969 3.150 4.8 RNAX1005... 4.114-4.311 104.5-109.499 HF85-...-07-80 7 1.969 3.150 5.3 RNAX1005... 4.311-4.508 109.5-114.499 HF85-...-07-80 7 1.969 3.150 5.7 RNAX1005... 4.508-4.705 114.5-119.499 HF85-...-07-80 7 1.969 3.150 6.2 RNAX1005... [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ Spare Parts Insert clamping screw Cartridge clamping screw Cylindrical cartridge Clamping wedge Cartridge adjusting screw Adapter adjusting screw C03010-T09P LDH4012 CARTCY-HF20 B6027 SH4075S HcM8 x 16 T00-09P20 H2.0-2D H2.0-2D 4.0SMS795 clamping torque (in/lbs) clamping torque (in/lbs) 17.7 26.6 249

236-258 XFIX.fm Page 250 Thursday, February 11, 2010 3:36 PM Xfix Heads/Shanks Seco Capto shank for diameters 3.3268-4.7047" (84.5-119.499) D A A inch Custom design A min A max Taper D max Reamer holders HF80-080-C6 [ 3.150 - - C6 3.1 5.5 HF80-...HSKA80 ] - 3.937 9.409 HSK-A80 3.1 - HF80-...HSKA100 ] - 3.937 9.409 HSK-A100 3.1 - HF80-...DIN69871/50 ] - 3.150 11.969 DIN69871/50 3.1 - HF80-...BT50 ] - 3.150 11.969 BT50 3.1 - Shanks and extensions for HF80-080-C6 (see Seco Capto catalog for more details). Seco max A Capto Shanks inch Taper size C6-390.410-100110A [ 4.331 HSK-A100 C6 2.2 C6-390.140-40085 [ 3.346 DIN40 AD C6 3.3 C6-390.272-40085 [ 3.346 DIN40 B C6 5.0 C6-390.540-40085 [ 3.346 DIN40 AD C6 3.2 C6-390.140-50030 [ 1.181 DIN50 AD C6 5.1 C6-390.140-50080 [ 3.150 DIN50 AD C6 6.6 C6-390.272-50030 [ 1.181 DIN50 B C6 7.9 C6-390.272-50080 [ 3.150 DIN50 B C6 1.8 C6-390.540-50050A [ 1.969 DIN50 ADB C6 3.4 C6-390.55-40075 [ 2.953 BT40 AD C6 4.6 C6-390.555-40075 [ 2.953 BT50 AD C6 2.0 C6-390.58-50040 [ 1.575 BT50 AD C6 3.2 C6-390.58-50090 [ 3.543 BT50 AD C6 4.5 C6-390.369-50050 [ 1.969 BT50B C6 2.4 C6-390.558-50050 [ 1.969 BT50 AD C6 3.4 Shank Extension C6-391.01-63100A [ 3.937 C6 C6 3.2 C6-391.01-63140A [ 5.512 C6 C6 3.4 C6-391.01-63060 [ 2.362 C6 C6 1.9 C8-391.02-63080A [ 3.150 C8 C6 5.0 C8-391.02-63055 [ 2.165 C8 C6 3.2 [= Stock standard, ]= Non Stock standard. Subject to change refer to current price and stock-list. See Seco Capto catalog. 250

236-258 XFIX.fm Page 251 Thursday, February 11, 2010 3:36 PM Xfix Heads/Shanks Graflex shank for diameters 3.3268-4.7047" (84.5-119.499) D A A inch Custom design A min A max Taper D max Reamer holders HF80-080-G6 [ 3.150 - - Graflex 6 3.1 5.5 HF80-...HSKA80 ] - 3.937 9.409 HSK-A80 3.1 - HF80-...HSKA100 ] - 3.937 9.409 HSK-A100 3.1 - HF80-...DIN69871/50 ] - 3.150 11.969 DIN50 ADB 3.1 - HF80-...BT50 ] - 3.150 11.969 BT50 ADB 3.1 - Shanks and extensions for HF80-080-G6 (see Seco Tooling System catalog for more details). Seco max A Graflex Shanks inch Taper size EM9304 401 3670 [ 2.756 HSK-A63 6 2.8 EM9304 401 36120 [ 4.724 HSK-A63 6 5.0 EM9305 401 3675 [ 2.953 HSK-A63 6 4.3 EM9306 401 3675 [ 2.953 HSK-A100 6 5.7 EM9306 401 36120 [ 4.724 HSK-A100 6 9.9 EM9306 401 36160 [ 6.299 HSK-A100 6 10.8 EM3469 401 3660 [ 2.362 DIN40 ADB 6 3.0 EM3469 401 36120 [ 4.724 DIN40 ADB 6 6.3 EM4466 401 3660 [ 0.787 DIN40 AD/ 6 3.1 EM3414 401 3650 [ 1.969 BT40 ADB 6 2.4 EM3414 401 36120 [ 4.724 BT40 ADB 6 6.2 EM3471 401 3645 [ 1.772 DIN50 ADB 6 6.8 EM3471 401 36100 [ 3.937 DIN50 ADB 6 9.0 EM3471 401 36140 [ 5.512 DIN50 ADB 6 11.3 EM4468 401 3645 [ 1.772 DIN50 AD/ 6 6.7 EM4468 401 36100 [ 3.937 DIN50 AD/ 6 9.4 EM4468 401 36140 [ 5.512 DIN50 AD/ 6 10.8 EM3416 401 3663 [ 2.480 BT50 ADB 6 8.4 EM3416 401 36100 [ 3.937 BT50 ADB 6 9.9 EM3416 401 36140 [ 5.512 BT50 ADB 6 12.0 Shank Extension M402 660 [ 2.362 Graflex 6 6 4.3 M402 661 [ 3.543 Graflex 6 6 4.8 M402 662 [ 4.724 Graflex 6 6 6.4 [= Stock standard, ]= Non Stock standard. Subject to change refer to current price and stock-list. See Seco Capto catalog. 251

236-258 XFIX.fm Page 252 Thursday, February 11, 2010 3:36 PM Xfix Heads/Shanks Heads for diameters 4.7047-6.0826" (119.5-154.499) For inserts, see page 241 Geometries Grade max Dia. D c (inch) Dia. D c (mm) A D Insert type EB45 EB845 EB1570 RX2000 RX1500 4.705-4.901 119.5-124.499 HF85-...-09-100 9 2.4803 3.934 8.6 RNAX1005... 4.901-5.098 124.5-129.499 HF85-...-09-100 9 2.4803 3.934 9.1 RNAX1005... 5.098-5.295 129.5-134.499 HF85-...-09-100 9 2.4803 3.934 9.2 RNAX1005... 5.295-5.492 134.5-139.499 HF85-...-09-100 9 2.4803 3.934 10.3 RNAX1005... 5.492-5.689 139.5-144.499 HF85-...-09-100 9 2.4803 3.934 11.0 RNAX1005... 5.689-5.885 144.5-149.499 HF85-...-09-100 9 2.4803 3.934 11.6 RNAX1005... 5.885-6.083 149.5-154.499 HF85-...-09-100 9 2.4803 3.934 12.3 RNAX1005... [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ Spare Parts Insert clamping screw Cartridge clamping screw Cylindrical cartridge Clamping wedge Cartridge adjusting screw Adapter adjusting screw C03010-T09P LDH4012 CARTCY-HF20 B6027 SH4075S HcM8 x 20 T00-09P20 H2.0-2D H2.0-2D 4.0SMS795 clamping torque (in/lbs) clamping torque (in/lbs) 17.7 26.6 252

236-258 XFIX.fm Page 253 Thursday, February 11, 2010 3:36 PM Xfix Heads/Shanks Seco Capto shank for diameters 4.7047-6.0826" (119.5-154.499) D A A inch Custom design A min A max Taper D max Reamer holders HF100-100-C8 [ 3.937 - - C8 3.9 10.8 HF100-...HSKA80 ] - 3.937 9.370 C8 3.9 - HF100-...HSKA100 ] - 3.937 9.370 C8 3.9 - HF100-...DIN69871/50 ] - 3.937 9.370 C8 3.9 - HF100-...BT50 ] - 3.937 9.370 C8 3.9 - Shanks and extensions for HF100-100-C8 (see Seco Capto catalog for more details). Seco max A Capto Shanks inch Taper size C8-390.410-100120A [ 4.724 HSK-A100 C8 10.3 C8-390.140-50070 [ 2.756 DIN50 AD C8 8.6 C8-390.140-50120 [ 4.724 DIN50 AD C8 12.1 C8-390.272-50070 [ 2.756 DIN50 B C8 8.6 C8-390.272-50120 [ 4.724 DIN50 B C8 12.3 C8-390.540-50070A [ 2.756 DIN50 ADB C8 8.6 C8-390.58-50070 [ 2.756 BT50 AD C8 9.0 C8-390.58-50120 [ 4.724 BT50 AD C8 12.8 C8-390.369-50070 [ 2.756 BT50 B C8 9.0 C8-390.558-50070 [ 2.756 BT50 AD C8 9.2 Shank Extension C8-391.01-80100A [ 1.181 C8 C8 8.1 C8-391.01-80125A [ 1.181 C8 C8 10.1 C8-391.02-63120A [ 1.260 C8 C8 9.0 C8-391.01-80065 [ 1.339 C8 C8 5.1 [= Stock standard, ]= Non Stock standard. Subject to change refer to current price and stock-list. See Seco Capto catalog. 253

236-258 XFIX.fm Page 254 Thursday, February 11, 2010 3:36 PM Xfix Heads/Shanks Graflex shank for diameters 119,5-154,499 D A A inch Custom design A min A max Taper D max Reamer holders HF100-100-G7 [ 3.937 - - Graflex 7 3.9 11.0 HF100-...HSKA80 ] - 3.937 9.370 HSK-A80 3.9 - HF100-...HSKA100 ] - 3.937 9.370 HSK-A100 3.9 - HF100-...DIN69871/50 ] - 4.331 9.370 DIN50 ADB 3.9 - HF100-...BT50 ] - 4.331 9.370 BT50 ADB 3.9 - Shanks and extensions for HF100-100-G7 (see Seco Tooling System catalog for more details). Seco max A Graflex Shanks inch Taper size EM9306 401 4685 [ 3.346 HSK-A100 7 9.2 EM9306 401 46160 [ 6.299 HSK-A100 7 13.2 EM9306 401 46240 [ 9.449 HSK-A100 7 17.6 EM3471 401 4650 [ 1.969 DIN50 ADB 7 9.4 EM3471 401 46120 [ 4.724 DIN50 ADB 7 14.5 EM3471 401 46200 [ 7.874 DIN50 ADB 7 23.1 EM4468 401 4665 [ 2.559 DIN50 AD/ 7 8.3 EM3416 401 4665 [ 2.559 BT50 ADB 7 9.1 EM3416 401 46120 [ 4.724 BT50 ADB 7 14.9 EM3416 401 46200 [ 7.874 BT50 ADB 7 23.7 Shank Extension M402 770 [ 2.362 Graflex 7 7 6.4 M402 771 [ 3.543 Graflex 7 7 9.9 M402 772 [ 4.724 Graflex 7 7 12.8 [= Stock standard, ]= Non Stock standard. Subject to change refer to current price and stock-list. See Seco Capto catalog. 254

236-258 XFIX.fm Page 255 Thursday, February 11, 2010 3:36 PM Xfix Adjusting Instructions - Loosen cartridge clamping screw - Index or replace insert - Unclamp adjusting screw by 1/4 of a turn and push cartridge back -Gently re-clamp cartridge clamping screw approx 4.4 in/lbs (0.5 Nm) Cartridge clamping screw Adjusting screw - Set clock to "zero" on reference pad. - Make sure measuring point is positioned after the lead angle. "0" Pre-loaded guiding pad Reference pad for adjustment -Set insert.00098" (0.025 mm) above reference pad using adjusting screw - Repeat adjusting process for all inserts +.00098" (0.025 mm) Adjusting screw +.00098" (0.025 mm) above reference pad - Final clamp cartridge clamping screw 16.7 in/lbs (2 Nm). Cartridge clamping screw Note: It is normal that pre-loaded pads are above inserts. Xfix Adjusting Instructions 255

236-258 XFIX.fm Page 256 Thursday, February 11, 2010 3:36 PM Xfix Adjusting instruction adapter Indexing pin Clamping screws (4) Radial adjusting screws (4) 1. Assembly - Thoroughly clean flange contact surface. - Loosen 4 radial adjusting screws so they do not interfere for assembly. - Put reaming head onto adapter (indexing pin) and tighten the 4 clamping screws. Setting operation in the machine spindle.00012 -.00020" Max (3-5 μm Max) 2. 2. Setting TIR control ring - Mount tool in the machine spindle. - Place μm clock as shown on sketch 2. - Unlock spindle so it can rotate freely by hand. - Start run-out correction using in sketch 4 adjusting screws (sketch 3). - Max run-out.0002" (5 μm). - When run-out values gets lower than.0004 (10 μm), proceed to final clamping (sketch 1) see clamping torque table for torque recommended values. - Finalize run-out adjustment Max.0002" (5 μm). Clamping screws 1. Radial adjustment 3. Clamping torque table Diameters inch Diameters mm Adapter size Clamping screw Clamping torque in/lbs 1.555-2.342 39.5-59.499 HF32 CHC M3 x 16 24 2.342-3.326 59.5-84.499 HF55 CHC M5 x 25 50 3.326-4.705 84.5-119.499 HF80 CHC M6 x 25 86 4.705-6-083 119.5-154.499 HF100 CHC M8 x 30 212 Xfix Adjusting instruction adapter 256

236-258 XFIX.fm Page 257 Thursday, February 11, 2010 3:36 PM Xfix Setting Fixture Setting fixture SFXF-300 Setting fixture Setting fixture for Xfix reamers Ø 1.555-6.083" (39.500-154.499 mm) Setting fixture Addtional center point included in delivery Complete Setting fixture...sfxf-300 Position 1: To adjust diameters 1.555-3.543" (39.5 to 90 mm) Position 2: To adjust diameters 3.543-6.083" (90 to 154.5 mm) Xfix Setting Fixture 257

236-258 XFIX.fm Page 258 Thursday, February 11, 2010 3:36 PM Xfix Cutting data With new reaming applications, we recommend using lower cutting data range values for initial runs. Cutting data to be increased gradually for optimization. Seco Material Group No. Geometry Cutting speed, v c (in/min) RX2000 RX1500 Feed f in in/rev for reamer diameter HF85 03 HF85 05 HF85 07 HF85 09 Ø 1.5551-2.3424 Ø 2.3425-3.3267 Ø 3.3268-7.8543 Ø 4.7047-6.0827 Machining allowance on Ø for reamer size (inch) 46 7 12 13 14 15 Z = 3 Z = 5 Z = 7 Z = 9 EB45.006 -.018.010 -.030.013 -.041.018 -.053 EB845 130-260 260-330.006 -.024.010 -.039.013 -.055.018 -.071 EB1570.006 -.018.010 -.030.013 -.041.018 -.053 EB45.006 -.012.010 -.020.013 -.027.018 -.035 EB845 65-130 130-260.006 -.018.010 -.030.013 -.041.018 -.053 EB1570.006 -.012.010 -.020.013 -.027.018 -.035 EB45.006 -.018.010 -.030.013 -.041.018 -.053 EB845 195-656 490-980.006 -.023.010 -.039.013 -.055.018 -.070 EB1570.006 -.018.010 -.030.013 -.041.018 -.053 EB45.006 -.018.010 -.030.013 -.041.018 -.053 EB845 195-590 490-980.006 -.023.010 -.039.013 -.055.018 -.070 EB1570.006 -.018.010 -.030.013 -.041.018 -.053 EB45.006 -.018.010 -.030.013 -.041.018 -.053 EB845 195-590 490-980.006 -.023.010 -.039.013 -.055.018 -.070 EB1570.006 -.018.010 -.030.013 -.041.018 -.053 EB45.006 -.018.010 -.030.013 -.041.018 -.053 EB845 195-395 330-820.006 -.023.010 -.039.013 -.055.018 -.070 EB1570.006 -.018.010 -.030.013 -.041.018 -.053.006 -.010.004 -.008.008 -.020.008 -.020.008 -.020.008 -.020 Xfix Cutting data 258

259 EPB_CAT.fm Page 259 Thursday, February 11, 2010 3:42 PM EPB Monobloc holders CAT Type 584 Side lock holders, Weldon INCH EPB Monobloc holders CAT Design 1 Design 2 ANSI B5.50 ADB Direct run-out.00015" maximum. Taper CAT 40 ADB d inch A D L l 3 A 1 Design Balancing 0.375 E2502 584 037200 2.00 1.37 4.69 1.50 1.25 1 2 2.4 0.500 E2502 584 050200 2.00 1.62 4.69 1.62 1.13 1 2 2.4 0.500 E2502 584 050462 4.62 1.614 7.31 1.614 3.75 2 2 3.96 0.625 E2502 584 062250 2.50 1.87 5.19 1.87 1.59 1 2 2.9 0.625 E2502 584 062575 5.75 1.87 8.44 1.87 4.84 2 2 5.5 0.750 E2502 584 075250 2.50 2.00 5.19 2.00 1.50 1 2 2.9 0.750 E2502 584 075375 3.75 2.00 6.44 2.008 2.75 2 2 3.96 0.750 E2502 584 075575 5.75 2.00 8.44 2.008 4.75 2 2 5.72 1.000 E2502 584 100400 4.00 2.50 6.69 2.25 2.88 2 2 5.0 1.000 E2502 584 100600 6.00 2.50 8.69 2.244 4.88 2 2 8.14 1.250 E2502 584 125400 4.00 2.75 6.69 2.25 2.88 2 2 5.9 1.250 E2502 584 125625 6.25 2.748 8.94 2.244 5.13 2 2 9.46 1.500 E2502 584 150450 4.50 3.50 7.19 2.618 3.00 2 2 10.64 Spare parts Locking screw (1) For d Qty S 0.375 951CNC037031 1 3/16 0.500 951CNC043037 1 7/32 0.625 951CNC056050 1 1/4 0.750 951CNC062050 1 5/16 0.875 951CNC062050 2 5/16 1.00/1.25 951CNC075068 2 3/8 Please check availability in current price and stock-list. 259

260 EPB_BT.fm Page 260 Thursday, February 11, 2010 3:45 PM EPB Monobloc holders BT JIS Type 584 Side lock holders, Weldon INCH EPB Monobloc holders BT JIS Design 1 Design 2 BT JIS B 6339-AD Direct run-out.00015" maximum. Taper BT40 AD BT40 ADB BT50 AD d inch A D L l 3 M A 1 Design Balancing 0.375 E4041 584 037250 2.50 1.37 5.07 1.50 3/8"UNC 1.75 1 2 2.6 0.500 E4041 584 050250 2.50 1.62 5.07 1.62 7/16"UNC 1.63 1 2 2.8 0.625 E4041 584 062250 2.50 1.87 5.07 1.87 9/16"UNC 1.59 1 2 2.9 0.750 E4041 584 075250 2.50 2.00 5.07 2.00 5/8"UNC 1.50 1 2 3.0 1.000 E4041 584 100400 4.00 2.50 6.57 2.25 3/4"UNC 2.88 2 2 5.3 1.250 E4041 584 125400 4.00 2.75 6.57 2.25 3/4"UNC 2.88 2 2 5.7 1.500 E3414 584 150450 4.50 3.50 7.07 2.618 3/4 3.00 2 2 9.4 0.375 E5766 584 037275 2.75 1.37 6.75 1.50 3/8"UNC 2.00 1 2 8.2 0.500 E5766 584 050300 3.00 1.62 7.00 1.62 7/16"UNC 2.13 1 2 8.4 0,625 E5766 584 062300 3.00 1.87 7.00 1.87 9/16"UNC 2.09 1 2 8.6 0.750 E5766 584 075300 3.00 2.00 7.00 2.00 5/8"UNC 2.00 1 2 8.8 0.875 E5766 584 087400 4.00 2.25 7.00 2.00 5/8"UNC 3.00 2 2 10.1 1.000 E5766 584 100400 4.00 2.50 8.00 2.25 3/4"UNC 2.88 2 2 10.4 1.250 E5766 584 125400 4.00 2.75 8.00 2.25 3/4"UNC 2.88 2 2 10.8 1.500 E5766 584 150450 4.50 3.50 8.50 2.62 3/4"UNC 3.00 2 2 13.9 2.000 E5766 584 200500 5.00 4.00 9.00 3.12 1"UNS 3.59 2 2 16.3 Spare parts Locking screw (1) For d Qty S 0.375 951CNC037031 1 3/16 0.500 951CNC043037 1 7/32 0.625 951CNC056050 1 1/4 0.750 951CNC062050 1 5/16 0.875 951CNC062050 2 5/16 1.00/1.25/1.50 951CNC075068 2 3/8 2.00 951CNS100087 2 1/2 Please check availability in current price and stock-list. 260

Dynamomentic keys The range of dynamomentic keys with fixed torque values are available in combinations of key grip/torque value for insert locking for most of the Seco milling products. By using a dynamomentic key you always ensure the correct tightening force when mounting the insert. The torque values are provided in the tables below. Dynamomentic keys are calibrated according to ISO 6789. Code key: T00-15P35 T00 = Dynamomentic screw driver type for Torx Plus blade T00T = Dynamomentic T-handle type for Torx Plus blade H00 = Dynamomentic screw driver type for hexagonal blade H00T = Dynamomentic T-handle type for hexagonal blade 15P = Torx Plus size 35 = Torque value 30.97 in/lbs (3.5 Nm) Dynamomentic key* Replaceable blade Dynamomentic key* Replaceable blade Torx Plus size Torque value in/lbs (Nm) Torx Plus size Torque value in/lbs (Nm) T00-06P05 T00-07P09 T00-08P12 T00-09P12 T00-09P20 T00-10P20 T00-10P30 T00-15P20 T00-15P30 T00-15P35 T00-15P50 T00-20P50 T00-06P T00-07P T00-08P T00-09P T00-09P T00-10P T00-10P T00-15P T00-15P T00-15P T00-15P T00-20P T06P T07P T08P T09P T09P T10P T10P T15P T15P T15P T15P T20P 4.4 (0.5 Nm) 8.0 (0.9 Nm) 10.6 (1.2 Nm) 10.6 (1.2 Nm) 17.7 (2.0 Nm) 17.7 (2.0 Nm) 26.6 (3.0 Nm) 17.7 (2.0 Nm) 26.6 (3.0 Nm) 31.0 (3.5 Nm) 44.3 (5.0 Nm) 44.3 (5.0 Nm) T00T-15P50 T00T-20P50 T00T-20P80 T00T-25P60 T00T-25P80 T00T-30P80 Dynamomentic key* T00T-15P T00T-20P T00T-20P T00T-25P T00T-25P T00T-30P Replaceable blade T15P T20P T20P T25P T25P T30P Hexagonal size 44 (5.0 Nm) 44 (5.0 Nm) 70.8 (8.0 Nm) 53 (6.0 Nm) 70.8 (8.0 Nm) 70.8 (8.0 Nm) Torque value in/lbs (Nm) Please observe that the blades are not interchangeable between screw driver type and T-handle type. Torx Plus is a registered trade mark belonging to Camcar-Textron (USA) H00T-3050 H00T-4050 H00T-4060 H00T-5080 H00T-60100 Dynamomentic key* H00T-3.0 H00T-4.0 H00T-4.0 H00T-5.0 H00T-6.0 Replaceable blade 3 mm 4 mm 4 mm 5 mm 6 mm 44 (5.0 Nm) 44 (5.0 Nm) 53 (6.0 Nm) 70.8 (8.0 Nm) 88.5 (10.0 Nm) Hexagonal size Torque value in/lbs (Nm) Maximum RPM and balancing H00-1509 H00-2020 H00-2530 * Including blade H00-1.5 H00-2.0 H00-2.5 1.5 mm 2.0 mm 2.5 mm 8 (0.9 Nm) 18 (2.0 Nm) 18 (2.0 Nm) Recommended maximum RPM for all Seco cutters are shown on each catalog page. Normally there is no need for blancing tools for RPM up to 10,000. However in some cases balancing is necessary, for instance when using heavy tools and toolholders in small machines. Over 10,000 RPM: We recommend blancing of tool and toolholders at least separately. Over 20,000 RPM: Both tool and toolholders must be blanced at least separately. Over 30,000 RPM: Tool and tool holders must be balanced as a unit. The max RPM in the tables should never be exceeded. 261 261 Dyno And Max RPM.indd 261 2/12/2010 7:54:13 AM

Insert Wear Failure Modes 1. NORMAL FLANK WEAR Normal Flank Wear, since it is predictable and dependable, is the most desirable wear condition. Rapid Flank Wear looks the same, but happens much quicker than the target 15 minutes of time in cut. Cause Abrasive wear. Hard microscopic inclusions of carbide or work-hardened material in the workpiece cut into the insert. Small pieces of coating break off and cut into the insert. The cobalt eventually wears out of the matrix, the carbide grains no longer have sufficient adhesion, and they break off. What to look for Relatively uniform abrasion along the cutting edge Occasionally, metal from the workpiece that is smeared over the cutting edge can exaggerate the apparent size of the wear scar Duratomic inserts will wear black and smooth Non-Duratomic inserts will have shiny abrasions An all black condition is the under-coating showing through the top coating When to expect it In all materials, an insert will fail due to normal wear if it doesn t fail from something else first. Corrective Actions (to Rapid Flank Wear) Reduce the cutting speed (RPM or SFPM) Select a more wear resistant, harder, or coated carbide grade. Apply coolant correctly 2. CRATERING Cause A combination of diffusion, decomposition and abrasive wear causes cratering. The heat from workpiece chips decomposes the tungsten carbide grains in the substrate, and carbon leeches into the chips (diffusion), wearing a crater on the top of the insert. The crater will eventually grow large enough to cause the insert flank to chip, or may cause rapid flank wear. What to look for Craters or pits on top of inserts Chipbreaking may improve after cratering starts When to expect it Iron or titanium-based alloys Corrective Actions (to Rapid Flank Wear) Use a coated grade Coatings containing relatively thick layers of aluminum oxide are best TiAlN is the most crater resistant PVD coating Apply coolant Use a freer cutting geometry to reduce heat Reduce the cutting speed (RPM or SFPM) Reduce feed rate Increasing the lead angle will have a small, but positive, effect 262 262-265 Failure Modes.indd 262 2/12/2010 7:55:26 AM

Insert Wear Failure Modes 3. BUILT UP EDGE Cause Material adhesion. BUE is a result of the workpiece material being pressure welded to the cutting edge. This occurs when there is chemical affinity, high pressure, and sufficient temperature in the cutting zone. Eventually, the built up edge breaks off and takes pieces of the insert with it, leading to chippage and rapid flank wear. What to look for Shiny material on the top or flank of the insert edge Erratic changes in part size or finish When to expect it Gummy materials At low speeds High temp alloys and stainless steel Threading operations Drilling Non-ferrous materials Corrective Actions Any coating, especially a nitride coating, will reduce built-up edge Increase the cutting speed (RPM or SFPM) Select an insert with a sharper cutting edge geometry Increase the feed rate Apply coolant correctly, perhaps increasing the concentration Use an insert with a smoother (polished) surface 4. CHIPPING Cause Mechanical instability. Chipping of the insert edge is often a result of vibrations in the workpiece or spindle. Hard inclusions in the surface of the material being cut and interrupted cuts result in local stress concentrations that can cause chipping. f = V/(5 x WL) f = vibration frequency (cycles per second) V = cutting speed (feet per minute) WL = wave length of vibration (inches) What to look for Chips along the edge of the insert When to expect it Non-rigid set-ups (bad bearings, worn spindles, etc.) Hard spots in work material Powdered Metal (PM) materials Corrective Actions Ensure proper (rigid) machine tool setup Minimize deflection Select a tougher insert grade Select a stronger cutting edge geometry Reduce the feed rate (especially at the entrance or exit of the cut) Use honed inserts See also corrective actions for built-up edge 263 262-265 Failure Modes.indd 263 2/12/2010 7:55:28 AM

Insert Wear Failure Modes 5. thermal mechanical failure Cause A combination of Thermal Cycling (changing the temperature of the insert very rapidly), Thermal Load (temperature differences between warm and cold zones), and Mechanical Shock causes thermal mechanical failure. Stress cracks form along the insert edge, eventually causing sections of carbide to pull out and appear to be chipping. Seen mostly in milling and interrupted cut turning. What to look for Multiple cracks perpendicular to cutting edge Need to identify before chipping When to expect it Milling Facing operations when a large number of parts are machined Operations with intermittent coolant flow Corrective Actions Apply coolant correctly or remove completely Select a tougher insert grade (higher cobalt content) Reduce the cutting speed (RPM or SFPM) Reduce the feed rate Use a freer cutting geometry to reduce heat 6. edge deformation Cause Thermal Overloading. Excessive heat causes the carbide binder (cobalt) to soften. Mechanical Overloading. Pressure of the insert against the workpiece makes the insert deform or sag at the tip, eventually breaking off or leading to rapid flank wear. What to look for Deformation at the cutting edge The dimensions of the workpiece may not be as expected When to expect it High heat operations High speed Hard steels or work-hardened surfaces High temperature alloys High feed rates Corrective Actions Apply coolant correctly Reduce the cutting speed (RPM or SFPM) Reduce the feed rate Select an insert with a larger nose radius. Use a harder, more wear resistant grade with a lower binder Using a freer cutting insert geometry will have a small but positive effect Use a coated carbide grade 264 262-265 Failure Modes.indd 264 2/12/2010 7:55:30 AM

Insert Wear Failure Modes 7. NOTCHING What to look for Notching or chipping at the depth of cut area on the insert When to expect it Materials with surface scale or oxidation Work hardened materials Cast or irregular surfaces (see also Built Up Edge) Corrective Actions Reduce the feed rate Vary the depth of cut when using multiple passes Use a tool with a larger lead angle Increase cutting speed if machining a high temp alloy NOTE: This will generate more flank wear Select a tougher insert grade Carefully increase the hone in the DOC area Use a chipbreaker designed for high feed rates Prevent build-up edge, especially in stainless and high temp alloys Cause Differences in hardness or abrasiveness within the workpiece. Notching is caused when the surface of the workpiece is harder or more abrasive than the material deeper in the cut, e.g. surface hardening from previous cuts, forged or cast surfaces, or surface scale. This causes the insert to wear more rapidly in that part of the cutting zone. Local Stress Concentration can also lead to notching. As a result of the compressive stress along the cutting edge and lack of the same behind the cutting edge the insert is particularly stressed at the depth of cut line. Impact of any sort, such as hard micro inclusions in the workpiece material or slight interruptions, can cause a notch. 8. MECHANICAL FRACTURE Cause Excessive wear of any type can cause mechanical fracture. Mechanical overload. The mechanical load is so great that the insert breaks during the first moments of a cut. What to look for Fracture of insert Corrective Actions Correct for all other failure mechanisms besides normal flank wear Reduce the feed rate Reduce the depth of cut Verify set-up rigidity Select a tougher insert grade (higher content of cobalt) Select an insert with a more secure cutting edge Select an insert with a chipbreaker geometry for higher feed rates Select a thicker insert Check the workpiece for hard inclusions or difficult entry 265 262-265 Failure Modes.indd 265 2/12/2010 7:55:32 AM

266-271 Material Groups.fm Page 266 Thursday, February 11, 2010 3:46 PM Workpiece materials Seco material groups Steel SMG 1 Very soft low-carbon steels. Purely ferritic steels. k c 1.1 BHN x 1000 Lbf/in 2 m c <135 196 0.21 2 Free-cutting steels. 120 <210 218 0.22 3 Structural steels. Ordinary carbon steels with low to medium carbon content (<0,5%C). 135 <165 218 0.25 4 5 6 7 Carbon steels with high carbon content (>0,5%C). Medium hard steels for toughening. Ordinary low-alloy steels. Ferritic and martensitic stainless steels. Normal tool steels. Harder steels for toughening. Martensitic stainless steels. Difficult tool steels. High-alloy steels with high hardness. Martensitic stainless steels. Difficult high-strength steels with 42-56 HRc hardness. Hardened steels from material group 36. Martensitic stainless steels. 165 <210 247 0.24 210 <270 276 0.24 270 <360 290 0.24 >360 421 0.22 Stainless steel Cast iron 8 Easy austenitic stainless steels. Free-cutting stainless steels. Calcium-treated stainless steels. 9 Moderately difficult stainless steels. Austenitic and duplex stainless steels. 10 Difficult stainless steels. Austenitic and duplex stainless steels. 11 Very difficult stainless steels. Austenitic and duplex stainless steels. 12 Medium hard cast iron. Grey iron. 13 Low-alloy cast iron. Malleable cast iron. Nodular cast iron. 14 Moderately difficult alloy cast iron. Moderately difficult malleable cast iron. Nodular cast iron. 15 Difficult high-alloy cast iron. Difficult malleable cast iron. Nodular cast iron. Other materials 16 Free-cutting non-ferrous materials. Aluminum with <16% Si. Brass, Zinc, Magnesium. 254 0.22 276 0.20 297 0.20 312 0.20 167 0.22 178 0.25 196 0.28 213 0.30 101 0.25 17 Non-ferrous materials. Aluminum with >16% Si. Bronze, Cupro-nickel. 101 0.27 20 Nickel-, Cobalt- and Iron-based superalloys with hardness <30 HRc. Incoloy 800, Inconel 601, 617, 625. Monel 400. 21 Nickel-, Cobalt- and Iron-based superalloys with hardness >30 HRc. Incoloy 925, Inconel 718, 750-X, Monel K-500. 22 Titanium based alloys, Ti-6Al-4V. 377 0.24 479 0.24 210 0.23 kc1.1-values with 0 degree effective cutting rake angle. For other rake angles, reduce the kc1.1-value by 1% for every degree increase in the cutting rake angle and vice versa, mc is the exponent used for calculating power demand. Bear in mind that the Rm-value is only an aid in the selection of the material group when the material has been worked by rolling, drawing, heat treatment or other methods that increase the strength of the material. Workpiece materials Seco material groups 266

266-271 Material Groups.fm Page 267 Thursday, February 11, 2010 3:46 PM Workpiece materials Classification Workpiece materials Classification Steels Seco Material Group No. Workpiece materials into material groups AISI W-stoff DIN BS AFNOR SS U.N.E./ I.H.A. JIS UNI 1 1106 1010 A27 65-35 A570 36 A573-81 65 A515 65 1015 1022 A36 A573-81 1025 1.0201 1.1121 1.1121 1.0443 1.0416 1.0038 1.0116 1.0345 1.0401 1.1133 1.0144 1.0425 1.1158 St 36 Ck 10 St 37-1 GS-45 GS-38 RSt 37-2 St 37-3 H I C 15 GS-20Mn 5 St 44-2 St 44-3 StE 320-3Z H II Ck 25 045 M 10 4360 40 A A1 4360 40 C 4360 40 B 1501 161 080 M 15 120 M 19 4360 43 A 4360 43 C 1501 160 050 A 20 Fd 5 XC 10 E 23-45 M 230-400 M E 24-2 Ne E 24-U A 37 CP CC 12 20 M 5 NFA 35-501 E 28 E 28-3 A 42 CP XC 25 1160 1265 1300 1305 1306 1311 1312 1330 1350 1410 1411 1412 1421 1432 1450 F.1510 F.221 F.1110 F.1110 F.1515 F.1120 S 10 C S 10 C SGV 410, 450, 480, 490 S 15 C SMnC 420 SMH 400 A, B, C SGV 410, 450, 480 S 25 C C10 Fe37-3 C15:C16 G22Mn3 2 1213 (12L13) (12L14) (12L13) 1140 1151 1.0715 1.0718 1.0723 1.0737 1.0718 1.0726 1.0727 9 SMn 28 9 SMnPb 28 15 S 20 9 SMnPb 36 9 SMnPb 28 35 S 20 45 S 20 230 M 07 210 A 15 212 M 36 212 M 44 S 250 S 250 Pb S 300 S 300 Pb 35 MF 4 45 MF 4 1912 1914 1922 1926 1940 1957 1973 SUM 22 SUM 22 L SUM 32 (SUM 32 L) CF9SMn28 CF9SMnPb28 CF9SMnPb36 CF9SMnPb28 3 1015 A27 70-36 1035 1035 A148 80-40 1043 1055 1042 A537 1 A662 C A738 A572-60 A572-60 1.1141 1.0551 1.0501 1.1181 1.0553 1.0503 1.0535 1.1191 1.0473 1.0436 1.0577 1.0570 1.8900 Ck 15 GS-52 C 35 CK 35 GS-60 C 45 C 55 Ck 45 19 Mn 6 ASt 45 ASt 52 St 52-3 17 MnV 6 StE 380 080 M 15 A2 060 A 35 080 A 32 A3 080 M 46 070 M 55 080 A 47 1501 224 1501 224 1501 224 4360 50 B 4360 55 E 4360 55 E XC 18 280-480 M AF 55 C 35 XC 38 320-560 M AF 65 C 45 XC 45 A 52 CP A 48 FP A 52 FP E 36-3 NFA 35-501 E 36 1370 1505 1550 1572 1606 1650 1655 1660 2101 2103 2107 2132 2142 2145 F.1511 F.1130 F.1135 F.5110 F.1150 F.1140 F.1518 S 15 CK S 35 C S 35 C S 45 C S 55 C S 45 C SGV 410, 450, 480 SM 490 A, B, C C16 C35 C35 C45 C45 C55 C45 Fe52BFN/Fe52CFN FeE390KG 267

266-271 Material Groups.fm Page 268 Thursday, February 11, 2010 3:46 PM Workpiece materials Classification Steels Seco Material Group No. Workpiece materials into material groups AISI W-stoff DIN BS AFNOR SS U.N.E./ I.H.A. JIS UNI 4 1045 1042 1064 1070 1080 1095 9254 1335 5120 A387 12-2 A182 F-22 4130 6150 4135 4142 4140 5140 5155 52100 8620 5115 A204A A355A 403 (410S) 410 P4 405 430 434 416 430F 409 430Ti 1.1730 1.1191 1.1221 1.1231 1.1248 1.1274 1.0904 1.1167 1.0841 1.7337 1.7380 1.7218 1.8159 1.2330 1.8515 1.2332 1.7225 1.7045 1.7176 1.3505 1.6523 1.7131 1.5415 1.8509 1.4000 1.4001 (1.4006) 1.2341 1.4724 1.4016 1.4113 1.4005 1.4104 1.4512 1.4510 C 45W Ck 45 Ck 60 Ck 67 Ck 75 Ck 101 55 Si 7 36 Mn 5 St 52-3 16 CrMo 4 4 10 CrMo 9 10 25 CrMo 4 50 CrV 4 35 CrMo 4 31 CrMo 12 47 CrMo 4 42 CrMo 4 42 Cr 41 55 Cr 31 100 Cr 6 21 NiCrMo 2 16 MnCr 5 15 Mo 3 42 CrAlMo 7 X6 Cr 13 X7 Cr 14 G-X 10 Cr 13 X6 CrMo 4 X6 CrAl 13 X6 Cr 17 X6 CrMo 17 X12 CrS 13 X12 CrMoS 17 X5 CrTi 12 X6 CrTi 17 En 43 B 080 M 46 060 A 62 070 A 72 060 A 78 060 A 96 250 A 53 150 M 36 150 M 19 1501 620 1501 622 CDS 110 735 A 50 708 A 37 722 M 24 708 M 40 708 M 40 530 A 40 527 A 60 534 A 99 805 H 20 527 M 17 1501 240 905 M 39 403 S 17 (403 S17) 410 S21 405 S 17 430 S 17 434 S 17 416 S 21 420 S 37 409 S 19 XC 65 XC 68 XC 75 XC 100 55 S 7 40 M 5 20 MC 5 15 CD 4.5 12 CD 9.10 25 CD 4 50 CV 4 34 CD 4 30 CD 12 42 CD 4 42 CD 4 42 C 4 TS 55 C 3 100 C 6 20 NCD 2 16 MC 5 15 D 3 40 CAD 6.12 Z 8 C 13 Z 8 C 13 Z 10 C 13 M Z 8 CA 12 Z 8 C 17 Z 11 CF 13 Z 13 CF 17 Z 6 CT 12 Z 4 CT 17 1672 1672 1678 1770 1774 1870 2090 2120 2172 2216 2218 2225 2230 2234 2240 2244 2244 2245 2253 2258 2506 2511 2912 2940 2301 2301 2302 2320 2325 2380 2383 F.114 F.1150 F.5103 F.5107 F.5117 F.144 F.411 F.431 F.155 F.1251 F.143 F.1250 F.1712 F.1252 F.1207 F.5230 F.1522 F.1516 F.1740 F.3110 F.3401 F.3113 F.3411 F.3117 S 45 C S 58 C SUP 4 SMn 438(H) SCM 420 SUP 10 SCM 432 SCM 440 SCM 440 SCr 440 SUP 9(A) SUJ 2, SUJ 4 SNCM 220(H) SUS 403 SUS 410 S SUS 410 SUS 405 SUS 430 SUS 434 SUS 430 F SUH 409 C45 C60 C70 5SSi8 Fe52 12CrMo910/ G14CrMo910 25CrMo4 50CrV4 30CrMo12 42CrMo4 55Cr31 100Cr6 20NiCrMo2 16MnCr5 16Mo3 41CrAlMo7 X6Cr13 X6Cr13 X12Cr13 X10CrAl12 X8Cr17 X8CrMo17 X12CrS13 X10CrS17 X6CrTi12 X6CrTi17 5 W1 420 L3 P20 + 1 O1 6 F7 4340 S1 420 (420) (420) 431 440B 1.1545 1.4021 1.2108 1.2210 1.2312 1.2510 1.2767 1.6582 1.6746 1.2542 1.4021 1.4028 1.4031 1.4923 1.4057 1.4112 C105W1 X42 Cr 13 90 CrSi 5 115 CrV 3 40 CrMnMoS 8 6 100 MnCrW 4 X45 NiCrMo 6 7 31 NiCrMo 13 4 34 CrNiMo 6 32 NiCrMo 14 5 45 WCrV 7 X20 Cr 13 X30 Cr 13 X40 Cr 13 X22 CrMoV 12 1 X20 CrNi 17 2 X90 CrMoV 18 BW1A 420 S 37 BL 3 BO1 En 30 B 830 M 31 817 M 40 830 M 31 BS1 420 S 37 420 S 45 431 S 29 Y 105 Z 20 C 13 Y 100 C 6 8 Mo 8 35 NCD 6 35 NCD 14 55 WC 20 Z 20 C 13 Z 30 C 13 Z 40 C 14 Z 15 CN 16-02 1880 (2314) 2092 (2140) 2140 2534 2541 2710 2303 (2304) (2304) 2321 F.5118 F.3402 F.5230 F.520L X210CrW12 F.5220 F.1270 F.1280 F.1260 F.5241 F.5261 F.5263 F.3404 F.313 SUS 420 J1 SNCM 447 SUS 420 J 1 (SUS 420 J 1) (SUS 420 J 1) SUS 431 SUS 440 B C38KU X20Cr13 C100KU 95MnWCr5KU 35NiCrMo6KB 45WCrV8KU X20Cr13 X30Cr13/XG40Cr13 X40Cr14 X16CrNi16 268

266-271 Material Groups.fm Page 269 Thursday, February 11, 2010 3:46 PM Workpiece materials Classification Steels Seco Material Group No. Workpiece materials into material groups AISI W-stoff DIN BS AFNOR SS U.N.E./ I.H.A. JIS UNI 6 P3 P20 H13 A2 D2 D4 (D6) L6 M 2 M 35 M 7 446 422 429 440C 1.2080 1.2311 1.2344 1.2363 1.2379 1.2436 1.2713 1.2721 1.7321 1.3343 1.3243 1.3348 1.4749 1.4935 1.4125 X210 Cr 12 40 CrMnMo 7 X40CrMoV 5 1 X100 CrMoV 5 1 X155 CrMoV 12 1 X210 CrW 12 55NiCrMoV 6 50 NiCr 13 20 MoCr 4 S6/5/2 S6/5/2/5 S2/9/2 X18 CrN 28 X20 CrMoWV 12 1 X10 CrNi 15 X105 CrMo 17 BD3 BH11 BA2 BD2 BD6 BM2 Z 200 C 12 Z 38 CDV 5 Z 100 CDV 5 Z 160 CDV 12 Z 200 CD 12 55 NCV 6 Z 85 WDCV 6-5-2-5 Z 100 CD 17 2710 2242 2260 2310 2312 2550 2625 2722 2723 2782 F.5212 F.5263 F.5318 F.5227 F.5211 F.5213 F.520.S F.528 F.1523 F.5603 F.5613 SKD 1 SKD 61 SKD 12 SKD 2 SKT 4 SKH 9 SKH 55 SUH 446 SUS 440 C X40CrMoV511KU X100CrMoV51KU X155CrVMo121KU X215CrW121K 30CrMo4 HS6-5-2-2 HS6-5-5 HS2-9-2 X16Cr26 7 A128 75 1.3401 G-X120 Mn 12 BW10 Z 120 M 12 2183 SCMnH 1 269

266-271 Material Groups.fm Page 270 Thursday, February 11, 2010 3:46 PM Workpiece materials Classification Stainless steels Seco Material Group No. 8 304 304H 303 304L 305 302 301 CF-8 Workpiece materials into material groups AISI W-stoff DIN BS AFNOR SS 1.4301 1.4948 1.4305 1.4306 1.4312 1.4310 1.4308 X5 CrNi 18 10 X6 CrNi 18 11 X10 CrNiS 18 9 X2 CrNi 18 10 X8 CrNi 18 12 X12 CrNi 18 9 X12 CrNi 17 7 X6 CrNi 18 9 304 S 10 304 S 51 303 S 31 304 S 11 305 S 19 302 S 31 301 S 21 304 C 15 Z 5 CN 18-09 Z 5 CN 18-09 Z 8 CNF 18-09 Z 3 CN 19-11 Z 10 CN 18-09 Z 11 CN 17-08 Z 6 CN 18-10M 2333 2333 2346 2352 2330 2331 2333 U.N.E./ I.H.A. JIS UNI F.3504 F.3504 F.3508 F.3504 F.3503 F.3507 F.3517 SUS 304 SUS 304 H SUS 303 SUS 304 L SUS 305 SUS 302 SUS 301 SCS 13 X5CrNi1810 X10CrNis1809 X2CrNi1811 X8CrNi1910 X10CrNi1809 X12CrNi1707 9 321 347 316 316Ti 316 316L 316Ti 316L 317 310S 317L 304LN 309S CF-8M 1.4541 1.4550 1.4436 1.4571 1.4401 1.4404 1.4571 1.4435 1.4449) 1.4845 1.4428 1.4418 1.4311 1.4833 1.4408 X6 CrNiTi 18 10 X6 CrNiNb 1810 X5 CrNiMo 17 13 3 X8 CrNiMoTi 17 12 2 X5 CrNiMo 17 12 2 X2 CrNiMo 17 13 2 X6 CrNiMoTi 17 12 2 X2 CrNiMo 18 14 3 X5 CrNiMo 17 13 X12 CrNi 25 20 X2 CrNiMo 18 16 4 X4 CrNiMo 16 5 X2 CrNiN 18 10 X6 CrNi 22 13 X6 CrNiMo 18 10 321 S 31 347 S 31 316 S 33 320 S 31 316 S 31 316 S 11 320 S 31 316 S 13 317 S 16 310 S 16 317 S 12 304 S 61 309 S 13 304 C 15 Z 6 CNT 18-10 Z 6 CNNb 18-10 Z 6 CND 19-12-03 Z 7 CND 17-11-02 Z 3 CND 17-12-02 Z 6 CNDT 17-12-02 Z 3 CND 18-14-03 Z 12 CN 25-20 Z 2 CND 19-15-04 Z 6 CND 16-04-01 Z 2 CN 18-10 AZ Z 15 CN 24-13 2337 2338 2343 2347 2348 2350 2353 2361 2367 2387 2371 2343 F.3523 F.3524 F.3534 F.3533 F.3535 F.3533 F.3539 F.3541 SUS 321 SUS 347 SUS 316 SUS 316 SUS 316 L SUS 316 L SUS 317 SUH 310 SUS 317 L SUS 304 LN SUS 309 S SCS 14 X6CrNiTi1811 X6CrNiNb1811 X5CrNiMo1713 X6CrNiTi1811 X5CrNiMo1712 X2CrNiMo1712 X6CrNiMoTi1712 X2CrNiMo1713 X6CrNi2520 X2CrNiMo1816 X2CrNiN1811 X6CrNi2314 10 S44400 202 S30815 CA6-NM 660 (S31726) 330 309 310 1.4521 1.4371 1.4893 1.4313 1.4980 1.4439 1.4864 1.4841 X1CrMoTi 18 2 X3 CrMnNiN 18 8 7 X8 CrNiNb 11 (G-)X4 CrNi 13 4 X5 NiCrTi 25 15 X2 CrNiMoN 17 13 5 X12 NiCrSi 16 X15 CrNi 23 13 X15 CrNiSi 25 20 284 S 16 (425 C 11) NA 17 309 S 24 314 S 31 Z 8 CMN 18-08-05 Z 4 CND 13-04 M Z 8 NCTV 25-15 B FF Z 3 CND 18-14-06 AZ Z 12 NCS 35-16 Z 15 CNS 20-12 Z 15 CNS 25-20 2326 2368 2385 2570 F.3123 F.3313 F.3312 F.3310 SUS 444 SUS 202 SCS 5 SUH 330 (G)X6CrNi304 X16CrNiSi2520 11 (329) S32304 SS30415 316LN 316LN S31500 S31803 CN-7M No8904 S31254 S31753 S32750 S17400 (1.4460) 1.4362 1.4891 1.4406 1.4429 1.4417 1.4462 1.4539 1.4539 1.4410 1.4542 X4 CrNiMo 27 5 2 X2 CrNiN 23 4 X5 CrNiNb 18 10 X2 CrNiMoN 17 13 2 X2 CrNiMoN 17 13 2 X2 CrNoMoSi 15 X2 CrNiMoN 22 5 3 (G-)X1 NiCrMoCu 25 20 5 X2 NiCrMoCu 25 20 5 X1 CrNiMoN 20 18 7 X2 CrNiMoN 18 13 4 X2 CrNiMoN 25 22 7 X3 CrNiMoN 25 7 4 X5 NiCrN 35 25 X5 CrNiCuNb 17 4 316 S 61 316 S 63 318 S 13 904 S 13 Z 5 CND 27-05 AZ Z 2 CN 23-04 AZ 2372 Z2 CND 17-12 Az Z2 CND 17-13 AZ 2376 Z3 CND 22-05 Az Z1 NCDU 25-02 M Z1 NCDU 25-20 2324 2327 2375 2375 2377 2564 2562 2378 2328 F.3543 SUS 329 J 1 SUS 316 LN SUS 316 LN SCS 24 270

266-271 Material Groups.fm Page 271 Thursday, February 11, 2010 3:46 PM Workpiece materials Classification Cast iron Seco Material Group No. Workpiece materials into material groups AISI W-stoff DIN BS AFNOR SS U.N.E./ I.H.A. JIS UNI 12 A48-25B 60/40/18 60/40/18 A220-40010 A220-50005 0.6015 0.7040 0.7043 0.7033 0.8145 0.8155 GG-15 GGG-40 GGG-40.3 GGG-35.3 GTS-45-06 GTS-55-04 Grade 150 400/17 370/17 350/22L40 P440/7 P510/4 Ft 15 D FGS 370/17 FGS 370/17 FGS 370/17 Mn 450-6 Mn 550-4 0115-00 0717-02 0717-15 0717-15 0852-00 0854-00 FG 15 FGE 38-17 FC 150 FCD 400 FCMP 440/490 FCMP 540 G15 GS 370-17 GMN 45 GMN 55 13 A48-30B A48-40B A436 Type 2 65/45/12 80/55/06 A220-50005 A220-70003 0.6020 0.6025 0.6660 0.7050 0.7060 0.7652 0.8155 0.8165 GG-20 GG-25 GGL-NiCr 20 2 GGG-50 GGG-60 GGG-NiMn 13 7 GTS-55-04 GTS-65-02 Grade 200 Grade 260 L-NiCuCr202 500/7 600/3 S-NiMn 137 P510/4 P570/3 Ft 20 D Ft 25 D L-NC 202 FGS 500/7 FGS 600/3 S-Mn 137 Mn 550-4 Mn 650-3 0120-00 0125-00 0523-00 0727-02 0727-03 0772-00 0854-00 0856-00 FG 20 FG 25 FGE 50-7 FGE 60-2 FC 200 FC 250 FCD 500 FCD 600 FCMP 540 FCMP 590 G 20 G 25 GS 500-7 GS 600-2 GMN 55 GMN 65 14 A48-45B 100/70/03 A43D2 A220-70003 A220-80002 A220-90001 0.6030 0.7070 0.7660 0.8165 0.8170 0.8170 GG-30 GGG-70 GGG-NiCr 20 2 GTS-65-02 GTS-70-02 GTS-70-02 Grade 300 700/2 Grade S6 P570/3 P690/2 Ft 30 D FGS 700/2 S-NC 202 Mn 650-3 Mn 700-2 0130-00 0737-01 0776-00 0856-00 0862-00 0864-00 FG 30 FGE 70-2 FC 300 FCD 700 FCMP 590 FCMP 690 G 30 GS 700-2 GMN 65 GMN 70 GMN 70 15 A48-50B A48-60B A220-90001 0.6035 0.6040 0.8170 GG-35 GG-40 GTS-70-02 Grade 350 Grade 400 Ft 35 D Ft 40 D Mn 700-2 0135-00 0140-00 0864-00 FG 35 FC 35 FC 40 FCMP 690 G 35 GMN 70 271

Workpiece materials - Machinability Superalloys and titanium alloys The machinability factors are normalized to the machinability of Inconel 718, bar material. Decreasing machinability factors indicates increasing machining difficulty. Use the machinability factors to calculate the recommended cutting speed for any specific alloy by multiplying its machining factor with the recommended cutting speed in the general cutting data table for Inconel 718 to the right. Material Inconel 718 (bar, forge, ring) TS2000 TS2500 a p a p Feed (ipr) 0.020 0.060 0.100 0.020 0.060 0.100 200 180 165 180 165 150 0.004 180 165 150 165 150 130 0.006 165 150 130 150 130 115 0.008 150 130 115 130 115 100 0.012 Seco Material Group No. Alloy Machinability factor Seco Material Group No. Alloy Machinability factor 20 Hastelloy B-2 1.4 Hastelloy C (plate) 1.8 Hastelloy C (cast) 1.4 21 Nimonic 115 1.0 Nimonic 263 1.1 Nimonic 81 1.1 Hastelloy C-22 1.4 Hastelloy C-276 1.3 Hastelloy C-4 1.3 Hastelloy G 1.3 Ni-base alloys Nimonic 90 0.7 Nimonic 91 0.7 Rene 95 0.4 Udimet 500 0.9 Hastelloy G-3 1.3 Udimet 700 0.9 Hastelloy N (bar. forge. ring) 1.4 Waspaloy (cast) 1.1 Hastelloy N (cast) 1.3 Waspaloy (bar. forge) 1.0 Ni-base alloys Hastelloy S 1.8 Hastelloy W 1.3 Hastelloy X 1.3 Inconel 600 1.4 Inconel 601 1.4 Inconel 625 (cast) 1.7 Fe-base alloys A286 (prec. hardened) 1.1 AM355 1.1 IN 800 1.1 Incoloy 909 1.1 N 155 (bar. forge. ring) 1.1 15-5PH 1.1 Inconel 625 (tube) 1.3 17-4PH (prec. hardened) 1.1 Inconel 706 1.4 Air resist 13 0.3 Inconel 708 (bar. forge. ring) 1.3 H531 0.4 Inconel X750 (solution annealed) 1.4 Nickel 201 4.3 Nimonic 105 1.3 Nimonic 80A 1.3 Co-base alloys Haynes 25 0.9 Haynes 188 (bar. forge. ring) 0.9 Haynes 188 (tube) 1.0 Stellite 21 1.1 Nimonic 86 1.4 Stellite 30 1.1 Nimonic 901 1.3 Stellite 31 1.1 A286 (plate) 1.4 A286 (sol. annealed) 1.3 22 Ti (pure) (tube) 4.3 Ti (pure) (plate. bar. forge. ring) 3.2 AM350 (heat treated) 1.8 Ti3Al-2.5V (bar. forge) 1.8 Fe-base alloys AM350 (cast) 1.3 IN 801 1.4 Lapelloy 1.8 M308 1.4 Ti3Al-2.5V (annealed tube) 4.3 Ti5Al-2.5Sn (annealed) 2.4 Ti5Al-2.5Sn (ELI) 2.9 Ti5Al-2.5Sn 2.5 N 155 (bar. forge. ring) 1.4 Ti5Al-2.5Fe 2.1 21 17-4PH (sol. annealed) 2.1 17-7PH (sol. annealed) 1.8 Inconel 625 (bar. forge. ring) 1.1 Inconel 713 1.1 Ti-base alloys Ti6-2-4-2 (prec. hardened) 1.8 Ti6-2-4-2 (annealed) 2.1 Ti6-2-4-6 (prec. hardened) 1.8 Ti6-2-4-6 (annealed) 2.5 Inconel 718 (cast) 1.1 Ti6Al-4V (annealed) 2.3 Ni-base alloys Inconel 718 (bar. forge. ring) 1.0 Inconel 718 (tube) 1.1 Inconel 901 1.1 Inconel X750 (prec. hardened) 1.0 Ti6Al-4V (annealed casting) 2.5 Ti6Al-4V (prec. hard) 2.1 Ti6Al-4V (annealed tube) 2.1 Ti6Al-4V (extruded) 2.5 Mar-M-200 0.6 Ti6Al-4V (ELI) 2.9 Mar-M-247 0.7 Ti6Al-5Zr-0.5Mo-Si 1.4 Nimonic 101 0.7 Ti6Al-6V-2Sn 1.3 272 272 Workpiece Materials Machinability.indd 272 2/12/2010 7:56:34 AM

273-276 Declaration_of_Conformity.fm Page 273 Thursday, February 11, 2010 3:48 PM Declaration of Conformity Cemented carbide inserts and insert carriers Cemented carbide inserts and cemented carbide insert carriers from Seco Tools are not included in the product range intended for the following requirements. Nevertheless Seco Tools can make the following declaration. These products meet all requirements in RoHS (Restriction of the use of certain Hazardous Substances in electrical and electronic equipment), WEEE (Waste Electrical & Electronic Equipment) and ELV (End of Life Vehicles) requirements. Products do not contain mercury, lead, hexavalent chromium, cadmium, CFC, HCFC, flame retardants or solvents in concentrations that exceed specifications in the regulations. Regrinding: Wet or dry grinding can produce potentially hazardous dusts or mists that can irritate skin, eyes, nose, throat and result in lung damage or disease. To avoid injury use proper safety precautions and protective equipment. Disposal: Seco Tools will buy back used inserts and solid carbide tools for recycling. Inserts and solid carbide tools should be separated from other metal waste (steel, aluminum, copper etc). All packing material is fully recyclable. CBN and PCD inserts Inserts from Seco Tools are not included in the product range intended for the following requirements. Nevertheless Seco Tools can make the following declaration. This product meets all requirements in RoHS (Restriction of the use of certain Hazardous Substances in electrical and electronic equipment), WEEE (Waste Electrical & Electronic Equipment) and ELV (End of Life Vehicles) requirements. Products do not contain mercury, lead, hexavalent chromium, cadmium, CFC, HCFC, flame retardants or solvents in concentrations that exceed specifications in the regulations. Regrinding: Wet or dry grinding can produce potentially hazardous dusts or mists that can irritate skin, eyes, nose, throat and result in lung damage or disease. To avoid injury use proper safety precautions and protective equipment. Disposal: Seco Tools will buy back used CBN- or PCD-tipped inserts for recycling. Inserts should be separated from other metal waste (steel, aluminum, copper etc). Solid CBN-insert may be discarded as landfill waste. All packing material is fully recyclable. Declaration of Conformity 273

273-276 Declaration_of_Conformity.fm Page 274 Thursday, February 11, 2010 3:48 PM Declaration of Conformity Black oxide insert carriers Insert carriers from Seco Tools are not included in the product range intended for the following requirements. Nevertheless Seco Tools can make the following declaration. This product meets all requirements in RoHS (Restriction of the use of certain Hazardous Substances in electrical and electronic equipment), WEEE (Waste Electrical & Electronic Equipment) and ELV (End of Life Vehicles) requirements. Products do not contain mercury, lead, hexavalent chromium, cadmium, CFC, HCFC, flame retardants or solvents in concentrations that exceed specifications in the regulations. Disposal: Used toolholders may be sent for recycling together with ordinary steel waste (chips and discarded steel scrap) for recycling. All packing material is fully recyclable. Cermet inserts Inserts from Seco Tools are not included in the product range intended for the following requirements. Nevertheless Seco Tools can make the following declaration. This product meets all requirements in RoHS (Restriction of the use of certain Hazardous Substances in electrical and electronic equipment), WEEE (Waste Electrical & Electronic Equipment) and ELV (End of Life Vehicles) requirements. Inserts do contain Nickel and will leach Nickel when in contact with the skin. Amount of leaching is higher than specified in norm SS-EN 1811 Reference test method for release of nickel from products intended to come into direct and prolonged contact with the skin. These norms are intended for products that are in direct and prolonged contact with the skin and are therefore not directly applicable for cermet inserts. Persons with known allergic reactions to nickel are advised to wear protective gloves when handling cermet inserts. Regrinding: Wet or dry grinding can produce potentially hazardous dusts or mists that can irritate skin, eyes, nose, throat and result in lung damage or disease. To avoid injury use proper safety precautions and protective equipment. Disposal: Used inserts may be recycled. Inserts should be separated from other metal waste (steel, aluminum, copper, etc) including cemented carbide inserts. All packing material is fully recyclable. 274

273-276 Declaration_of_Conformity.fm Page 275 Thursday, February 11, 2010 3:48 PM Declaration of Conformity Nickel coated insert carriers Insert carriers from Seco Tools are not included in the product range intended for the following requirements. Nevertheless Seco Tools can make the following declaration. This product meets all requirements in RoHS (Restriction of the use of certain Hazardous Substances in electrical and electronic equipment), WEEE (Waste Electrical & Electronic Equipment) and ELV (End of Life Vehicles) requirements. Products do not contain mercury, lead, hexavalent chromium, cadmium, CFC, HCFC, flame retardants or solvents in concentrations that exceed specifications in the regulations. Insert carriers do contain Nickel and will leach Nickel when in contact with the skin. Amount of leaching is higher than norm SS-EN 1811 Reference test method for release of nickel from products intended to come into direct and prolonged contact with the skin. These norms are intended for products that are in direct and prolonged contact with the skin and are therefore not directly applicable for insert carriers. Persons with known allergic reactions to nickel are advised to wear protective gloves when handling Nickel coated insert carriers. As Ni leaching is regarded as the highest priority within our environmental portfolio, SECO TOOLS will continue to focus on solving this issue and we expect to implement a new process during 2009 that will meet the demand according to SS-EN 1811. Disposal: Used tools may be sent for recycling together with ordinary steel waste (chips and discarded steel scrap) for recycling. All packing material is fully recyclable. 275

273-276 Declaration_of_Conformity.fm Page 276 Thursday, February 11, 2010 3:48 PM Declaration of Conformity Intentionally added alloying elements Grade Cemented carbide Coating W Ti Ta Nb Co Cr Ni Mo C N Ti Al C N O CM [ [ [ [ [ [ [ [ [ CMP [ [ [ [ [ [ [ [ [ [ [ [ CP200 [ [ [ [ [ [ [ CP250 [ [ [ [ [ [ [ CP300 [ [ [ [ [ [ [ [ [ CP500 [ [ [ [ [ [ [ CP600 [ [ [ [ [ [ [ C15M [ [ [ [ [ [ [ [ [ DP2000 [ [ [ [ [ [ [ [ [ [ F15M [ [ [ [ [ [ [ F25M [ [ [ [ [ [ [ [ [ F30M [ [ [ [ [ [ [ F40M [ [ [ [ [ [ [ HX [ [ [ [ H15 [ [ [ [ H25 [ [ [ [ KX [ [ [ [ MH1000 [ [ [ [ [ [ [ MK1500 [ [ [ [ [ [ [ [ [ MK2000 [ [ [ [ [ [ [ MK3000 [ [ [ [ [ [ [ [ [ [ MP1500 [ [ [ [ [ [ [ [ [ [ MP2500 [ [ [ [ [ [ [ [ [ [ MP3000 [ [ [ [ [ [ [ MS2500 [ [ [ [ [ [ [ [ [ [ TK1000 [ [ [ [ [ [ [ [ [ [ [ TK2000 [ [ [ [ [ [ [ [ [ [ [ [ TM2000 [ [ [ [ [ [ [ [ [ [ [ [ TM4000 [ [ [ [ [ [ [ [ [ [ [ [ TP1000 [ [ [ [ [ [ [ [ [ [ [ [ TP1500 [ [ [ [ [ [ [ [ [ [ [ [ TP200 [ [ [ [ [ [ [ [ [ [ [ [ TP2000 [ [ [ [ [ [ [ [ [ [ [ [ TP2500 [ [ [ [ [ [ [ [ [ [ [ [ TP3000 [ [ [ [ [ [ [ [ [ [ [ [ TP40 [ [ [ [ [ [ [ [ TS2000 [ [ [ [ [ [ [ TS2500 [ [ [ [ [ [ [ T1000D [ [ [ [ [ [ [ [ [ [ [ [ T150M [ [ [ [ [ [ [ [ [ T200M [ [ [ [ [ [ [ [ [ [ T2000D [ [ [ [ [ [ [ [ [ [ T25M [ [ [ [ [ [ [ [ T250M [ [ [ [ [ [ [ [ [ [ T250D [ [ [ [ [ [ [ T3000D [ [ [ [ [ [ [ [ [ [ T350M [ [ [ [ [ [ [ [ [ [ T400D [ [ [ [ [ [ [ T60M [ [ [ [ [ [ [ [ [ 883 [ [ [ [ 890 [ [ [ [ 276