Inno vation. Parting and grooving program HX Heavy duty machining - stability & process security
|
|
- Adela Fields
- 8 years ago
- Views:
Transcription
1 Inno vation Parting and grooving program HX Heavy duty machining - stability & process security EN
2 Application - customer benefi ts Industries Power generation, turbine construction oll production Wind power industry Ship-building Typical components Turbine and generator shafts olls Drive shafts Large components Materials Steel in general Stainless steel Cast iron and steel castings Product advantages YOU benefi ts Stable system High process security Optimum force distribution Longer tool life Clamped from above Easy handling educed tool change times Chip grooves for universal application Fewer insert changes necessary educed storage costs Excellent swarf control Security for machine operator Not much space required in swarf bin 2
3 Product characteristics Easy handling The new generation of parting and grooving inserts can be clamped and changed easily and comfortably from above. Stable design The extremely large contact faces balance the cutting forces in an ideal way. These are the requisites to be able to not only produce profile grooves but also carry out stabbing operations. Contact faces Overhead machining The ideal solution for the machining of generator and turbine shafts. Particularly in combination with insert -81 grooving operations into solid material can be carried out to the desired depth with process security and excellent swarf control at the same time
4 Product characteristics The geometries -70 suitable for all materials Ideal for high feed rates Stable cutting edge Suitable for interrupted cut Suitable for steel, stainless steel and cast iron Suitable for profi le grooving and stabbing operations -71 smooth cutting action Very positive rake angle with small negative chamfer Suitable for grooving and profi le grooving Suitable for steel, stainless steel and cast iron Minimum cutting forces -PN the number one for cast iron Double chamfered and honed cutting edge For grooving and stabbing as well as profi ling operations Stable machine conditions necessary 4
5 Product characteristics The geometries New -81 turbine rotor and rotor shaft machining made easy First choice for grooving into solid material Chip divider makes chip evacuation easier Suitable for steel and stainless steel Maximum process security Smooth cutting action with maximum cutting edge stability Ideal solution for overhead machining Minimized vibration Cutting materials Extraordinary heat resistance High toughness Excellent resistance to notching CVD high-performance coating with maximum hardness and extremely smooth surface Good suitability for dry machining CTCP125 CTC3110 Steel in general Stainless steel Spheroidal cast iron (GGG) Cast iron Steel in general Stainless steel 5
6 Program CE CTC3110 CTCP125 s Type, r d 1 α [mm] description [mm] [mm] [ ] HX HX ,2 HX PN-040CE HX ,5 20 HX HX PN-040CE HX ,6 25 HX HX PN-040CE 110 HX PN-130CE HX HX ,0 HX PN-040CE HX HX HX PN-045CE 9,2 HX PN-150CE 2,4 HX HX HX PN-150CE 50 HX ,2 HX HX ,5 HX Steel Stainless r s r Cast iron Main application Extended application Non ferrous metals Heat resistant Hard materials International CEATIZIT range, for present availability see price list d 1 Ordering example: 10 pieces HX
7 Program HDCG. s h s [mm] Type, description h [mm] 16 HDCGN 1HX16P.33 HX 16.. SHIM SEAT HX16 33 PIN 65.M8 20 HDCGN 1HX20P.33 HX 20.. SHIM SEAT HX20 25 HDCGN 1HX25P.44 HX 25.. SHIM SEAT HX25 32 HDCGN 1HX32P.44 HX 32.. SHIM SEAT HX HDCGN 1HX40P.44 HX 40.. SHIM SEAT HX40 PIN 90.M12 45 HDCGN 1HX45P.44 HX 45.. SHIM SEAT HX45 50 HDCGN 1HX50P.44 HX 50.. SHIM SEAT HX50 60 HDCGN 1HX60P HX 60.. SHIM SEAT HX /SW /SW 4 Tools upon request 7
8 CEATIZIT worldwide CEATIZIT worldwide production sites and support centres CEATIZIT worldwide distribution partner network Parent company in Luxembourg CEATIZIT Luxembourg Sàrl oute de Holzem 101 L-8232 Mamer Tel.: Fax: Contact for further information: 542 EN We reserve the right to make technical changes for improvement of the product.
MSS Monobloc holders for parting and grooving
MSS Monobloc holders for parting and grooving Easy, profitable and convincing 2 Monobloc tool holder, system GX, for inserts with two cutting edges, size GX24. Inexpensive solution for radial grooving,
More informationCOATED CARBIDE. TiN. Al 2 O 3
COATED CARBIDE GENERAL INFORMATION CVD = Chemical Vapour Deposition coated grades GC2015, GC2025, GC2135, GC235, GC3005, GC3015, GC3020, GC3025, GC3115, GC4015, GC4025, GC4035, S05F, and CD1810. PVD =
More informationMilling. COPYRIGHT 2008, Seco Tools AB 1/111
Milling 1/111 2/111 Milling A simple choice! Experts required? No Just follow some basic rules. 3/111 Face milling 4/111 Square shoulder milling 5/111 Disc milling 6/111 Copy milling 7/111 Plunge milling
More informationNew cutting tools from Sandvik Coromant
Supplement to Main Catalogue 2006 New cutting tools from Sandvik Coromant TURNING - MILLING - DRILLING - ORING - TOOLHOLDING CoroPak 2006.1 790 new products introduced! No compromise! With the new generation
More informationHeavy Roughning Milling Cutter. MSR Series. Improving machine efficinecy. Double the productivity. Square Insert MSR Facemill. Insert lineup expanded
Heavy Roughning Milling Cutter MSR Series Improving machine efficinecy Square Insert MSR Facemill MonSteR M S R Square S Mill Double the productivity MonSteR M S R Mill Insert lineup expanded Heavy Milling
More informationNo compromise. Highest total efficiency wastewater pumping. grundfos se & sl ranges Submersible and dry-installed wastewater pumps
grundfos se & sl ranges Submersible and dry-installed wastewater pumps 0.9-30 kw 2, 4, 6 pole 50Hz No compromise Highest total efficiency wastewater pumping ULTIMATE WASTEWATER PUMPING TECHNOLOGY The renewed
More informationMilling Chuck Features
Milling Chuck Features Since its first introduction into the industry in 1963, Nikken has sold over 2,000,000 worldwide and never stopped improving its original design. Featuring multi-roller bearings
More informationU-Max Chamfering endmill SPMT-WL 0.17 (0.08-0.21) -WH 0.35 (0.10-0.42) R215.64. Long edge cutter 215.3 0.17 (0.10-0.20) R215.3 -AAH 0.12 (0.08-0.
General Turning PROFILING Feed recommendations Feed per tooth, fz (mm/tooth) Insert geometry Insert size Starting value (min.- max.) U-Max Chamfering endmill SPMT-WL 0.17 (0.08-0.21) -WH 0.35 (0.10-0.42)
More informationTable of contents BRAZED TURNING TOOLS. Toolholders H 2. Tips H 6. Rods H 8. Technical information H 9 H 1
Table of contents BRAZED TURNING TOOLS Toolholders 2 Tips 6 Rods 8 9 1 ISO External holders General turning External Ordering Tip According to ISO243-1975 (DIN 4982-198) h b l 1 f 1 f 2 a p r ε γ 1) λ
More informationThree Key Elements of a Cutting Tool
End Mill Training Three Key Elements of a Cutting Tool Geometry Cutting Tool 3 Elements Needed in a Good Cutting Tool Well Balanced For Best Performance Only Good as the Weakest Link End Mill Terms A -
More informationManufacturing Tooling Cutting Tool Design. Elements of Machining. Chip Formation. Nageswara Rao Posinasetti
Manufacturing Tooling Cutting Tool Design Nageswara Rao Posinasetti Elements of Machining Cutting tool Tool holding Guiding device Work piece Machine tool January 29, 2008 Nageswara Rao Posinasetti 2 Chip
More informationPROVEN SOLUTIONS FLIUD END MACHINING FLUID END MACHINING PROVEN SOLUTIONS & TOOLING
PROVEN SOLUTIONS FLIUD END MACHINING FLUID END MACHINING PROVEN SOLUTIONS & TOOLING SECO PROVEN SOLUTIONS WILL IMPROVE YOUR PROCESS When you partner with Seco, our team of metalworking experts evaluate
More information1001 Business Center Drive Mount Prospect, IL 60056-2181 Toll Free: (800) 950-5202 Phone: (847) 635-0044 Fax: (847) 635-7866
1001 Business Center Drive Mount Prospect, IL 60056-2181 oll Free: (800) 950-5202 Phone: (847) 635-0044 Fax: (847) 635-7866 http://www.sumicarbide.com Sumitomo offers advanced milling, drilling, and hard
More informationCutting Tool Materials
Training Objectives After watching the video and reviewing this printed material, the viewer will gain knowledge and understanding of cutting tool metallurgy and specific tool applications for various
More informationTooling concepts Gear milling
Tooling concepts Gear milling Complete gear-cutting solutions optimized for your needs About ninety percent of all gear wheel manufacturing involves metal cutting. Your main opportunities for rationalizing
More informationProduct Innovations 2014/2. A Company of the SWAROVSKI Group www.tyrolit.com
Product Innovations 2014/2 A Company of the SWAROVSKI Group www.tyrolit.com Contents 2 Contents PREMIUM Cerabond System 4 PREMIUM Longlife für Steel 6 premium Deep Cut Protection 7 From a good idea to
More informationEasy honeycomb processing. The comprehensive tooling range for machining honeycomb panels
Easy honeycomb processing The comprehensive tooling range for machining honeycomb panels Honeycomb panel suitable tools for each working step Ein System, viele Varianten. A requirement for todays wood
More informationbe carried out to determine whether the housing connecting bolts and the mounting bolts are still suitable. Torque
SD Plummer Block Housings SD Series 31.. + 30.. housings are split plummer blocks for spherical roller bearings with adapter sleeves. They are fitted with labyrinth seals. Housings for shaft ends are supplied
More informationThink precision, Think HSS REAMING
Think precision, Think HSS REAMING SUMMARY REAMING TOOLS 2 Zoom on a reamer 3 Which HSS for maximum efficiency? 4 Coatings for the best performance 5 Vocabulary 6 Choose the right design 7 Types of bevel
More informationBoring. Contents. Boring
ontents oring oring ackground... 3 oring operation types... 4 oring tools... 5 hoice of boring tool type... 6 Roughing... 6 inishing... 7 Inserts for boring... 8 uilding and setting boring tools... 9 Ways
More informationTHE INFLUENCE OF STEEL GRADE AND STEEL HARDNESS ON TOOL LIFE WHEN MILLING IN HARDENED TOOL STEEL
THE INFLUENCE OF STEEL GRADE AND STEEL HARDNESS ON TOOL LIFE WHEN MILLING IN HARDENED TOOL STEEL S. Gunnarsson, B. Högman and L. G. Nordh Uddeholm Tooling AB Research and Development 683 85 Hagfors Sweden
More informationThe ACCU-LUBE Micro-Lubricating System for external and internal lubrication
E -000 Information on our company The ACCU-LUBE Micro-Lubricating System for external and internal lubrication the environmentally safe Micro-Lubricating System eliminating waste disposal Development:
More informationF 02 2-04-17 18.10 Sida F 2 HEAVY MACHINING F 2
HEAVY MACHINING 2 Table of contents HEAVY MACHINING Heavy turning Introduction Inserts Cutting data recommendations 4 5 9 Spare parts for HD cassettes 10 Technical information 11 Bar peeling Introduction
More informationEWE Ball Valve-Type Tapping Valve. EWE Ball-Type Tapping Valve. EWE GBM Tapping Valves. for water and gas
The following overview shows the different EWE tapping valves to help you to make your choice: EWE valve tapping valve for vertical tapping with operating shut-off, for all types of pipe, with external
More informationIntroduction to JIGS AND FIXTURES
Introduction to JIGS AND FIXTURES Introduction The successful running of any mass production depends upon the interchangeability to facilitate easy assembly and reduction of unit cost. Mass production
More informationIBARMIA TECHNICAL SOLUTIONS JOURNAL // ibarmia.com //#03 OCT 2014 ZVH 58/L6000 MULTIPROCESS: PROBABLY, THE MOST FLEXIBLE MACHINE IN THE MARKET
IBARMIA TECHNICAL SOLUTIONS JOURNAL // ibarmia.com //#0 OCT 04 ZVH 58/L6000 MULTIPROCESS: PROBABLY, THE MOST FLEXIBLE MACHINE IN THE MARKET HTL 5 kw, 500 rpm 800 Nm 000 kg High production system Fixed
More informationMakes bends greater than 90 in a single operation
TurnPro Tools TurnPro Indexing Tube Bender TurnPro HTB Indexing Handle Tube Bender Makes bends greater than 90 in a single operation Eliminates crossed handles Noassembly andreassembly ofbenderhandles
More informationPole position with high-tech tools.
_ EXPERTISE IN MACHINING Pole position with high-tech tools. Industry-specific solutions Automotive industry MACHINING TECHNOLOGY FULL SPEED AHEAD. More than any other sector, the automotive industry is
More informationChapter 6 Machining Center Carbide Insert Fundamentals
This sample chapter is for review purposes only. Copyright The Goodheart-Willcox Co., Inc. All rights reserved. N10G20G99G40 N20G96S800M3 N30G50S4000 N40T0100M8 N50G00X3.35Z1.25T0101 N60G01X3.25F.002 N70G04X0.5
More informationMulti-function tools EcoCut & ProfileMaster
Multi-function tools EcoCut & ProfileMaster EN CEATIZIT secrets of success Secrets of success CEATIZIT is your partner for exceptional hard material solutions. Hard materials and tools from CEATIZIT -
More informationPart and tooling design. Eastman Tritan copolyester
Part and tooling design Eastman Tritan copolyester Part and tooling design Process Part design Tooling design High cavitation considerations Process Process Project development flow chart Concept OEM generates
More informationYour technology partner for machining INNOVATIONS 2015
Your technology partner for machining INNOVATIONS 2015 When something exceptional develops between us: That's the MAPAL effect. You do not want to do everything differently. But many things better. Opening
More informationHigh speed machining and conventional die and mould machining
High speed machining and conventional die and mould machining Reprint from HSM - High Speed Machining There are a lot of questions about HSM today and many different, more or less complicated, definitions
More informationWERKZEUGMASCHINEN BENDING TOOLS
WRKZUGMASCHINN BNDING TOOLS Press Brakes HT Werkzeugmaschinen GmbH mmendinger Str. 21 D-79331 Teningen Germany Tel. + 49 (0) 76 41 46 09-0 Fax + 49 (0) 76 41 46 09-290 email: info@eht.de Internet: www.eht.de
More informationSaferand easierinstallation
EN 85-07 Saferand easierinstallation IföSigninstallationsystem andifösignbuilt-incistern www.ifosanitar.com/sign Aneffectivesolution withmanyadvantages. Ifö Sign installation system makes life a little
More informationRoller Chain Coupling
Roller Chain Coupling Features 1. Simple structure A roller chain coupling consists of one duplex roller chain and two sprockets for a simplex chain. Handling is very simple as both the shafts (driving
More informationGeneral Guidelines for Building Aluminum Production Injection Molds
General Guidelines for Building Aluminum Production Injection Molds Using 7000 series Aluminum Mold Plate By David Bank Aluminum Injection Mold Company Rochester, New York 1 Introduction This high strength
More informationConfort 160. Sliding Systems. Sapa Building System
Confort 160 Sliding Systems Sapa Building System Confort 160 is a high performance thermally insulated sliding window system, with a user-friendly slide action. The system, which has an attractive aesthetic
More informationNSK Product Lineup for Machine Tools
NSK Product Lineup for Machine Tools We have two general catalogs on Super Precision and Precision Machine Components available, which contain detailed information related to our bearings and linear products.
More informationGEOMETRY OF SINGLE POINT TURNING TOOLS
GEOMETRY OF SINGLE POINT TURNING TOOLS LEARNING OBJECTIVES Introduction to Features of single point cutting tool. Concept of rake and clearance angle and its importance System of description of Tool geometry
More informationFlanged and Butt-= Weld Type
Document : PG00 Year : 09 Product Group 00 Flanged and Butt-= Weld Type (LNG and LPG) Page 09 Document : PG00 Year : 09 Product Group 00 Cryogenic Butterfly valves The Cryogenic Butterfly Valve Design
More informationHow To Improve Your Turning
Best practice machining of wind power components Tool and method advances for efficient manufacturing WIND POWER EDITORIAL Introduction Manufacturing parts for the wind-power industry is an opportunity
More informationDUGARD. Machine Tools Since 1939. Dugard 400 Slant Bed High Precision CNC Lathe. www.dugard.com
DUGARD Machine Tools Since 1939 Dugard 400 Slant Bed High Precision CNC Lathe www.dugard.com Superb Performance, Maximum Stability, Maximum Reliability Precision, Power and Capacity Make the Dugard 400
More informationULTRAFLEX Slatted-floor system for farrowing and piglet pens. Innovative solutions for the future, world wide...
ULTRAFLEX Slatted-floor system for farrowing and piglet pens w w w. i k a 2 New times new requirements Drained floors are the system of the future but at the same time new and very different requirements
More informationPrecision Vise Combinations
Precision Vise Combinations PanaVise vises and work holding tools have hundreds of uses limited only by your imagination! Each vise allows the head to Tilt, Turn & Rotate and position your work anywhere
More informationNEW INTERCHANGEABLE REAMING HEAD SYSTEM FAST
August 2007 / NEW029.1 / PAGE 1 OF 7 NEW INTERCHANGEABLE REAMING HEA YTEM FAT ACCURATE GOO FINIH Ingersoll is introducing the QwikReam, a new high speed reaming system. The QwikReam consists of an interchangeable
More informationPower generation. Tool and method advances for efficient manufacturing
Power generation Tool and method advances for efficient manufacturing POWER GENERATION - EDITORIAL Introduction World power consumption is predicted to rise by some 20% in the period up to the middle of
More informationAerospace Engine. Total component solutions
Aerospace Engine Total component solutions Sandvik Coromant in Aerospace Expertise for challenging production Your demands set our standards Aerospace is one of the most technically demanding industries
More informationC O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S
C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S January 2009 Issue 6 Valu Guide Brackets The Ultimate in Adjustability and Cost Savings Valu Guide brackets are part of a family
More informationGrade Selection... Coated Grades / CVD... Coated Grades / PVD... Cermet... PCBN (T-CBN)... PCD (T-DIA)... Ceramics...
Products Grade Selection... Coated / CVD... Coated / PVD... Cermet... PCBN (T-CBN)... PCD (T-DIA)... Ceramics... Uncoated Cemented Carbides... Ultra fine Grain Cemented Carbides... -2-4 -6-8 -0-2 - -4-5
More informationSummary of Insert Grades. Insert Lineup Turning Milling Drilling Insert Selection Table Grade Properties PCD CBN. Ceramic. Cell Fiber. Cermet.
1~15 Summary of Insert Lineup Milling Drilling Insert Selection Table Grade Properties PCD Ceramic Cell Fiber PVD Coated CVD Coated PVD Coated for PVD Coated for Milling and Drilling 2~7 2~3 4 5 5 6 7
More informationUp to Speed. When considering a modern CNC. Spindle speeders allow micromachining on lower-rpm machines
Up to Speed Spindle speeders allow micromachining on lower-rpm machines By Gerard Vacio, BIG Kaiser Precision Tooling Inc. As cutting tool manufacturers increase the recommended operating conditions for
More informationLathe Milling Attachment
Lathe Milling Attachment By L C. MASON BY CLEVERLY stacking cold-rolled flat stock together, T-slots and slide for this lathe milling attachment are made without costly machinery. In fact, only two tools,
More informationSense it! Connect it! Bus it! Solve it! EncoderS
Sense it! Connect it! Bus it! Solve it! EncoderS Incremental encoders Incremental encoders use electrical pulses to measure rotation speed or position. The dual-channel incremental encoders of the Ri series,
More informationRight Angle Grinder USA MADE FLAP DISCS
USA MADE FLAP DISC Right Angle Grinder CGW Offers the Most Extensive Line of Flap Discs in the Marketplace CGW flap discs blend and finish in one operation which replaces the traditional twostep grinding
More informationIt's large enough to handle most welding job shop projects, yet small enough to make it a worth while home-workshop tool
It's large enough to handle most welding job shop projects, yet small enough to make it a worth while home-workshop tool H Craft Print Project No. 272 ERE'S a metal bender that will enable you to bend
More informationMachine devices, jig devices
Machine devices, jig devices 853 K0697 Rolled thread studs DIN 6379 Material: Tempered steel. KIPP Rolled thread studs DIN 6379 Order No. D L B1 B2 Approx. weight g Surface finish: Thread rolled. Class
More informationNEW SIX-SEALS CUTTING RING. INTERNATIONAL INDUSTRIAL PATENT Nr. 864061 of the 10/03/99 FLANKS AND DOES NOT REPLACE THE STANDARD RING CURRENTLY IN USE
B4 NEW SIX-SEALS CUTTING RING. INTERNATIONAL INDUSTRIAL PATENT Nr. 864061 of the 10/03/99 FLANKS AND DOES NOT REPLACE THE STANDARD RING CURRENTLY IN USE AVAILABLE IN CARBON AND STAINLESS STEEL 23 THEORY
More informationMaterial Comparison Lower Quality Blender Optimum 9400. Electric Motor Assembly. Plastic Fans Low cost
Below is a factual comparison between our Optimum 9400 model and a lower quality high-speed blender dated May 20 th 2014. This comparison has been independently conducted, reviewing the key components
More informationANYTHING ELSE IS A COMPROMISE
ANYTHING ELSE IS A COMPROMISE THE REVOLUTION BEGAN IN 1993. That s when Iron Grip transformed the fitness industry with an unwavering commitment to groundbreaking design and state-of-the-art production
More informationindexable Center Drill
Our innovative tooling design upgrades productivity and competitive capability while reducing production requirements in a range of industries. The tooling system is designed to benefit users of machining
More informationSHOP NOTES METAL SHAPER FOR YOUR SHOP
SHOP NOTES METAL SHAPER FOR YOUR SHOP A METAL SHAPER is indispensable for certain machining operations where flat surfaces must be produced within very close limits, such as machining flats on castings,
More informationG. VULCANIZED SEAT Pressure sensitive seating with full disc overlap provides positive seating at high and low pressures.
A B C D G F E J H I A. RETAINER PLUGS Retain hinge and stop pins while providing compression to stabilization spheres. B. STABILIZATION SPHERES Stabilize hinge and stop pins, preventing vibration and wear.
More informationGear Cutting Tools. Hobbing Gear Milling. Leitz Metalworking Technology Group
Gear Cutting Tools Hobbing Gear Milling Leitz Metalworking Technology Group Important information Important information 4 Services 5 An introduction to FETTE 6 Page Important information Product range
More informationSNS Plummer Block Housings. 50 % increase in bearing life
SNS Plummer Block Housings 50 % increase in bearing life Systems Expertise New: A proactive housing... This is the life! Product life in this new generation of SNS plummer block housings is so good that
More informationSecolor Selection Guide. User s Manual. 2007-11-21 Seco Business Solutions SECO TOOLS AB, SWEDEN
Secolor Selection Guide User s Manual 2007-11-21 Seco Business Solutions SECO TOOLS AB, SWEDEN 1 INTRODUCTION...3 2 FEATURES...3 2.1 SEARCH FUNCTIONALITY...4 2.1.1 ISO / ANSI...4 2.1.2 Insert designation...4
More informationCUTTING TOOL TECHNOLOGY. 1. Tool life 2. Tool Materials 3. Tool Geometry 4. Cutting fluids
CUTTING TOOL TECHNOLOGY 1. Tool life 2. Tool Materials 3. Tool Geometry 4. Cutting fluids 1 Introduction Machining is accomplished by cutting tools. Cutting tools undergo high force and temperature and
More informationBRASS FITTINGS FOR THREADED PIPES
03/14 BRASS FITTINGS GENERAL FEATURES The brass fittings for threaded pipes are used as junctions for pipelines with threaded connection UNI ISO 228/1. The thread dimensions are subdivided in various types
More informationStock Preparation Division: The C-bar screen basket a high-tech product
14 Stock Preparation Division: The C-bar screen basket a high-tech product According to an old saying: paper is made in the Holländer. Despite the common opinion that paper mills only contain paper machines,
More information21. - 22. 11. 2012, Plzeň, Czech Republic, EU
PRO-BEAM TECHNOLOGY - HEAT TREATMENT OF METALS Václav HOŠEK a, Filip VRÁBLÍK a, Uwe CLAUß b, Pavel STOLAŘ a a ECOSOND s.r.o., Čerčany, Czech Republic, EU, ecosond@ecosond.cz b pro-beam AG & Co.KgaA, Neukirchen,
More informationA quality solid-section compression moulded soft close seat. Fitted with buffers and metal hinges. Suitable for the Cube pan. Colours: White only.
Cube A quality solid-section compression moulded soft close seat. Fitted with buffers and metal hinges. Suitable for the Cube pan. Cube Seat 300024 67 280 71 199 417 21 331 Geo A quality solid-section
More informationMeet the new freud. New Products: Innovations as well as heavy investment in up to date technology in the plants for superior product quality.
Meet the new freud 10 LSB45017X Meet the new freud 1 0.35 PATENTED SYSTEMS Ø450x4.8/3.5x60 Z72 HW n max 4200 RPM 8935 PATENTED SYSTEMS New Products: Innovations as well as heavy investment in up to date
More informationSHARP SVL 4525 LINEAR WAY VERTICAL MACHINING CENTER
SHRP SVL 4525 LINER WY VERTICL MCHINING CENTER PRECISION MCHINE TOOLS Sharp Industries, Inc. 3501 Challenger Street Torrance, C 90503 Tel 310-370-5990 Fax 310-542-6162 Email: info@sharp-industries.com
More information* Provided that the overall length is within the minimum length parameter of the Gen II blank that is machined.
PLEASE SEE GEN II CUSTOM VALVE SPECIFICATIONS PAGES 42 & 43 CUSTOMER NAME CUSTOMER SIGNATURE DATE By signing this form I accept the goods are nonreturnable for credit and that Manley takes no responsibility
More informationMilling & Machining Centers
Training Objective After watching the program and reviewing this printed material, the viewer will gain knowledge and understanding of basic milling theories and procedures. In addition, the viewer will
More information*Specify Oversize When Ordering
Cylinder Block Deck Cracks On Caterpillar 3208 Engines and Caterpillar explain how to inspect the Caterpillar 3208 engines for block cracks. Part No. Location Insert OD Size Depth Tapered ID 3906854 Intake
More informationOMATIVE s Adaptive Control & Monitoring at HYUNDAI-KIA (various facilities in Korea)
OMATIVE s Adaptive Control & Monitoring at HYUNDAI-KIA (various facilities in Korea) Industry: Automotive Hyundai was established in 1946 and quickly became the largest corporation in South Korea. Kia,
More informationVdS 2100-09en. VdS Guidelines for water extinguishing systems. Non-return valves. Requirements and test methods. VdS 2100-09en : 2011-05 (01)
VdS Guidelines for water extinguishing systems VdS 2100-09en Requirements and test methods VdS 2100-09en : 2011-05 (01) Publishing house: VdS Schadenverhütung GmbH Amsterdamer Str. 172-174 50735 Köln,
More informationDiwiTherm, Resistance Thermometers Model TR75, with digital Display Battery or Solar Powered
Electrical Temperature Measurement DiwiTherm, Resistance Thermometers Model TR75, with digital Display Battery or Solar Powered WIKA Data Sheet TE 60.75 Applications Machinery, plant and tank construction
More informationCNC Applications Speed and Feed Calculations
CNC Applications Speed and Feed Calculations Photo courtesy ISCAR Metals. Turning Center Cutters What types of cutters are used on CNC turning Centers? Carbide (and other hard materials) insert turning
More informationREHAU CABLE MANAGEMENT IT S IN THE FINISH. WWW.REHAUTRUNKING.CO.UK
REHAU CABLE MANAGEMENT IT S IN THE FINISH. WWW.REHAUTRUNKING.CO.UK This guide has been created to give you a quick reference to our range of quality trunking systems and their article numbers for easy
More informationCart Management. Save on labor costs. Save on service costs. Lose fewer carts
Cart Management Cart Management Save on labor costs Save on service costs Lose fewer carts The labor costs associated with retrieving shopping carts are a major cost factor for every store. systec cart
More informationCHAPTER E. DOC (Depth of cut) t max Bore Ø.031
Step #1: stablish bore diamter Step #2: Find Depth of Cut (DOC) requirements Step #3: Follow column and row to find correct tool type Step #4: Look up tool type to find available widths CHAPTR DOC (Depth
More informationTHE IDEAL SOLUTION SHELVING. Sales Telephone: 01553 765205 Sales Fax: 01553 768464 Email: sales@eais-foodservice.co.uk
THE IDEAL SOLUTION Sales Telephone: 01553 765205 Sales Fax: 01553 768464 Email: sales@eais-foodservice.co.uk EZ STORE Bright Chrome Wire System g Bright Chrome wire shelves Heights 3 tier = 1650mm standard
More informationSignature Norman Crepeau Special Condition Subject to prior sale Johnford ST60B. CNC Turning Center
Mr. Will Rood B & B Precise Products 25 Neck Road Benton, ME 04901 Date June 3, 2008 Quote # 06032008 Valid for 30 Days Quoted by Norman Signature Norman Crepeau Special Condition Subject to prior sale
More informationTARIFF CODE and updates standard
TARIFF CODE and updates standard No HS CODE AHTN CODE PRODUCT DESCRIPTION PRODUCT TYPE STANDARDS IDENTIFIED 7207 Semi finished products of iron or non alloy steel Containing by weight less than 0.25% of
More informationCAST IRON THE BASICS. Heatline - Cast Iron Radiators SMOOTH FLAT FILE TO REMOVE ANY SWARF. ONE TIME. ASSEMBLY. JOINTS SHOULD BE TIGHTENED.
CAST IRON THE BASICS 1. DO NOT LIFT ON YOUR OWN. 2. ONLY LIFT THE RADIATOR VERTICALLY. 3. DO NOT LIFT MORE THAN 8/10 SECTIONS AT ANY ONE TIME. 4. POSITION THE RADIATOR BEFORE FINAL ASSEMBLY. 5. THIS PRODUCT
More informationTruLaser Tube: Optimal tube. and. profile cutting. Machine Tools / Power Tools Laser Technology / Electronics Medical Technology
TruLaser Tube: Optimal tube and profile cutting Machine Tools / Power Tools Laser Technology / Electronics Medical Technology Giving you the edge in laser tube processing. The TRUMPF Group ranks among
More informationIndex. Illustrations CERAMIC PRODUCTIVITY MANUAL. Page. Page
CERAMIC PRODUCTIVITY MANUAL Index Page What is a Whisker-Reinforced Ceramic...4 WG-300 Fracture Surface...4 Physical Properties...5 How to Use the Properties of Greenleaf Advanced Ceramics...6 Relative
More informationFRACASSO SCAFFOLDING PS 720
FRACASSO SCAFFOLDING PS 720 Characteristics Geometry Strengths PS 720 was designed and constructed in keeping with European regulations EN12810 and EN12811. 150 mm pin obtained by tapering the upright
More informationGK Packing System Welding Instructions
GK Packing System Welding Instructions Roxtec GmbH Neuer Höltigbaum 1-3, 22143 Hamburg GERMANY Tel +49 (040) 657398-0, Fax +49 (040) 657398-50 EMAIL info@de.roxtec.com, www.roxtec.de Welding instructions
More informationHAS SERIES Air Suspensions
Superior Driver Comfort HAS SERIES Air Suspensions Greater Payloads On- and Off-Road Applications HAS Series: Choose the Right Suspension for Your Application. Hendrickson has the air suspension to fit
More informationDISC HARROWS IN X-ARRANGEMENT FOR TRACTORS FROM 90 TO 300 HP
SPERBER I ECOTRAK BUSSARD I SEEADLER DISC HARROWS IN X-ARRANGEMENT FOR TRACTORS FROM 90 TO 300 HP SPERBER BUSSARD SEEADLER ECOTRAK DISC HARROWS WITH REAR WHEEL AXLE www.rabe-gb.de STUBBLE CULTIVATION Todays
More informationThe surface roughness of the polyurethane lining is 10 times lower than cement-lined pipes.
QUALITY INSIDE When it comes to long life piping for drinking water, sewage, industrial water or gas, there is one name that continues to lead the way - ECOPUR by vonroll. Delivering precision-engineered
More informationK17.12 Door closers K17. Doors 01.09.2013
K17 Doors K17.12 01.09.2013 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com Contents 1. OPTIC door closer TS40(V) with scissor
More informationHow To Make A Spiral Fluted And Wire Wrapped Dagger Handle
Making A Spiral Fluted and Wire Wrapped Dagger Handle By: Steve Culver, MS Part 1 Making A Spiral Fluted and Wire Wrapped Dagger Handle By: Steve Culver, MS After the rough handle material is drilled through
More informationTechCut 4 Precision Low Speed Saw
Product Brochure TechCut 4 Precision Low Speed Saw 3" - 6" Blade Range Digital Speed Display 1-Micron Sample Indexing Spring-Loaded Dressing Stick Attachment All Aluminum & Stainless Steel Construction
More informationEJOT Spiralform. The thread formers for metal. EJOT The Quality Connection
EJOT Spiralform The thread formers for metal EJOT The Quality Connection Imprint Editor: EJOT GmbH & Co. KG Industrial Fasteners Division D 57319 Bad Berleburg Layout and Realisation: EJOT GmbH & Co. KG
More informationEasyTrack 2 Accessories List
EasyTrack 2 Accessories List DATA LOGGER ET6061 EasyTrack2 Data Logger (6 Channel) Measurement Range -150 to 500 C (-238 F to 932 F) Accuracy ±0.5 C (0.9 F). Type K thermocouple. 6000 readings per channel.
More informationNow available with full IP65 rating: Protection from dust and water jets NEW: K470 Plus covered containers
Now available with full IP65 rating: Protection from dust and water jets NEW: K470 Plus covered containers Universal container K 470 the original since 1950 Often copied but never equalled or bettered
More information