Dohrmann Applicators by: DE-1000 Dohrmann Enterprises, Inc. DE-25 AUGRA METER
DE Dohrmann Enterprises, Inc. for more information 316 33rd Ave South Waite Park, MN 56387 (320) 252-8999 www.dohrmannenterprises.com Applicator selection SELF PROPELLED FORAGE HARVESTERS For Liquid Concentrate Inoculants: DE-1000 Dohrect Enject (Page 3) Conventional Application: DE-100 or DE-55 (Page 4) & SP-1 Control (Page 11) PULL-TYPE FORAGE HARVESTERS For Liquid Concentrate Inoculants: DE-1000 Dohrect Enject & CM-2 Chopper Mount (Page 3) Conventional Application: DE-45 (Page 4) or DE-25 (Page 5) & CM-1 Chopper Mount (Page 8) Optional Equipment: SP-1 Control LARGE SQUARE BALERS DE-100 or DE-55 (Page 4), LS-1 Mounting Kit (Page 8) & SP-1 Control (Page 11) Optional Equipment: Flowmeter (Page 10) & Moisture Tester (Page 9) ROUND BALERS DE-25 (Page 5) & SP-1 Control (Page 11) John Deere: Add JDRD Mounting Kit (Page 8) Non-John Deere Round Balers: Add 2 #184 Round Baler Nozzle Brackets NH BR770 & BR780 can use DE-55 (Page 4) Optional Equipment: Flowmeter (Page 10) & Moisture Tester (Page 9) SMALL SQUARE BALERS DE-25 or DE-6 (Page 5) Optional Equipment: SP-1 Control (Page 11), Flowmeter (Page 10) & Moisture Tester (Page 9) STATIONARY AND SEMI-STATIONARY APPLICATION DE-8 (12 Volt, Page 5) EXISTING TANK OR BARREL MOUNT DE-9 (Page 4) or DE-7 (Page 5) Optional Equipment: SP-1 Control (Page 11) & Flowmeter (Page 10) For Baled Hay Only: Moisture Tester (Page 9) GRANULAR APPLICATION AM-1 Augra Meter (Page 6) For Self Propelled Forage Harvesters & Balers Add: AM-1BK Blower Kit (Page 6) For Round & Large Square Balers Add: AM-1BKD Blower Kit Diffuser (Page 7) NON MECHANICAL (GRAVITY) APPLICATION DE-5 Gravity Flow (Page 7) Transfer Pumps: Page 7 Mounting Options: Page 8 Moisture Testers: Page 9 Flowmeters: Page 10 Control Options: Page 11 2 (320) 252-8999
Dohrect Enject System for Liquid Concentrate { be DE-1000 FM-1000 DE-1000 U.S. Patent NO. 6,443,369 Canada Patent NO. 2,411,690 Introduced in 2001, this is the original Low Volume, Long Distance Applicator designed for applying inoculants in a liquid concentrate form and is also the only inoculant system with an insulated tank. This unit was designed for use on Self Propelled Forage Harvesters and may also used on Pull-Type Forage Harvesters with our CM-2 Chopper Mount. Low Application Rate Mix up to 1000 treatable ton per fill in 10 gallon insulated tank Apply at rates as low as 1.28 ounces per ton (maximum 5 tons per minute) 10 Gallon Insulated Tank Keeps bacteria cool and healthy for prolonged storage and during high temperature harvest SP-2 Variable Rate Control Included For DE-1000 Only Allows the operator to make on the fly rate adjustments from the cab FM-1000 Flowmeter Included For DE-1000 Only Gives the operator an indication of the product flow rate through the system greatly simplifies system calibration Easy to Clean Insulated tank is easily removed and has a full diameter lid Flush System Included (Pump and Lines) No Nozzle or Orifice to plug Compact Size Dimensions: 20 L X 19 W X 24 H { DE-1000 with CM-2 FM-1000 Flowmeter (Included with DE-1000) This flowmeter is designed exclusively for the DE-1000 to make calibration simple and easy. This unit reads in Tons per Minute (100 ton per gallon rate) on one side and ounces per minute on the other. Simply float the calibration ball to your desired application rate and calibration is complete. Mounting is done with a swivel bracket that can be mounted to a flat surface or can be mounted to a railing using the included U-Bolt. CM-2 Chopper Mount The CM-2 is used for mounting the DE-1000 Dohrect Enject System on pull-type forage harvesters www.dohrmannenterprises.com 3
Ag-Serv applicators DE-100 DE-55 DE-45 DE-9 DE-100 Ideal for: Self Propelled Forage Harvesters Large Square Balers (require LS-1 & SP-1) 100 Gallon Tank and Frame 3.0 GPM Self Priming Pump Self-Fill System 3 Nozzle Assembly with 20 of hose In-Line Gauge Recommended Options: SP-1 Speed Control (page 11) DigiFlow Digital Flowmeter (page 10) Moisture Tester-for use with baled hay (page 9) DE-55 Dimensions: Tank & Frame: 38 L X 23 W X 32 H Pump Unit: 15 H X 15 W X 6.5 D Ideal for: Self Propelled Forage Harvesters Large Square Balers (require LS-1 & SP-1) 55 Gallon Tank and Frame 3.0 GPM Self Priming Pump Self-Fill System 3 Nozzle Assembly with 20 of hose In-Line Gauge Recommended Options: SP-1 Speed Control (page 11) DigiFlow Digital Flowmeter (page 10) Moisture Tester-for use with baled hay (page 9) DE-45 Dimensions: Tank & Frame: 43 L X 22 W X 22 H Pump Unit: 15 H X 15 W X 6.5 D Ideal for: Small Square Balers Pull-Type Forage Harvesters (requires CM-1) 45 Gallon Tank and Frame 3.0 GPM Self Priming Pump Self-Fill System 3 Nozzle Assembly with 20 of hose In-Line Gauge Recommended Options: SP-1 Speed Control (page 11) Moisture Tester-for use with baled hay (page 9) DE-9 Dimensions: Tank & Frame: 57 L X 24 W X 31H Pump Unit: 15 H X 15 W X 6.5 D Same as DE-100, DE-55 & DE-45 Pump Unit without Tank and Frame Use with an existing tank or draw from a barrel mount 3.0 GPM Self Priming Pump Self-Fill System 3 Nozzle Assembly with 20 of hose In-Line Gauge Recommended Options: SP-1 Speed Control (page 11) DigiFlow Digital Flowmeter (page 10) Moisture Tester-for use with baled hay (page 9) 4 (320) 252-8999
DE-25 Dimensions: 33 L X 19.5 W X 22 H Ideal for: Small Square Balers Round Balers Pull-Type Forage Harvesters (requires CM-1) 25 Gallon Tank with flat surface mounting brackets 2.0 GPM Self Priming Pump Self-Fill System 2 Nozzle Assembly with 20 of hose Recommended Options: SP-1 Speed Control (page 11) JDRD Mounting Kit for John Deere Round Balers (page 8) DigiFlow Digital Flowmeter (page 10) Moisture Tester-for use with baled hay (page 9) DE-25 DE-6 DE-6 Dimensions: 18 L X 15 W X 22 H Ideal for: Small Square Balers Forage Blowers & Baggers For use with 5-6 gallon pail (pail not included) 2.0 GPM Self Priming Pump 2 Nozzle Assembly with 20 of hose DE-7 DE-7 Use with an existing tank or a barrel mount, not recommended for Large Square Balers 2.0 GPM Self Priming Pump 2 Nozzle Assembly with 20 of hose DE-8 DE-8 Ideal for: Forage Blowers & Baggers (stationary applications) Hangs on the side of a 55 gallon drum (drum not included) 2.0 GPM Self Priming Pump Single Nozzle Assembly (4-72 oz. per minute) with 20 of hose 15 Power Cord with Battery Clips mounted on applicator www.dohrmannenterprises.com 5
Granular applicators AM-1 AM-1 Augra Meter AM-1 Augra Meter A proven concept designed for easy, precise metering of granular products. The AM-1 series Augra Meters are 12 volt systems available in 5 different flow ranges. (see chart) 1.6 Cubic Foot Poly Hopper 12 Rain Tight Lid Easy to Fill 2 High Density Poly Auger 12 Volt Direct Drive Gear Head Motor SP-1s Control Included (See page 11 for details) Enables user to control the auger speed to achieve the desired flow rate Can be wired on the Augra Meter or elsewhere in the operators reach, wire connections included Allows the operator to make on the fly rate adjustments from the cab Allows easy connection with blower kit Model # Dimensions: 23.5 L X 14.5 W X 28 H RPM Low / High / Minute Minute AM-1UHV 25 1lb. 7.9 AM-1HV 17.9 5.75 AM-1MV 12.7 3.75 AM-1LV 8.5.5 2.7 AM-1ULV 4.5.3 1.5 NOTE: The rate chart was created using a product with a density of 100 pounds per cubic foot. The flow rate will change proportionately with the density. Testing was done with a power source of 13.8 volts, different power input voltages will change the application rate. 30 Power Cord with Battery Clips AM-1BK The Augra Meter is designed for granular application at the blower or bagger, or on a small square baler or pull-type forage harvester. For self-propelled forage harvesters the AM-1BK (on this page) is recommended. For round or large square balers, both the AM-1BK (on this page) and AM-1BKD (on page 7) are recommended. AM-1BK Blower Kit (As shown displayed on Augra Meter) The AM-1BK is designed to work with any 12 volt Augra Meter. This kit uses the air from the blower to move the granular product through a flex hose to your desired application point. 12 Volt Blower Fan 12 of Flex Hose 30 Power Cord Pre-assembled, easy to install 6 (320) 252-8999
AM-1BKD Blower Kit Diffuser The AM-1BKD is an attachment for the AM-1BK. With the Blower Kit, this improved diffuser creates a wider and more consistant spray pattern than previous methods. AM-1BKD DE-5 Gravity Applicator The DE-5 can be used with dry granular or liquid preservatives. (It will NOT work with powdery products) Mounts Either Hanging or Standing Simple reversal of brackets change the mounting position Rates are Controlled with Color Coded Orifices Liquid application rate = 22-46 ounces per minute Granular application rate = 1/4 to 1 pound per minute DE-5 NOTE: When using the DE-5 with granular product application, it must be used on moving and/or shaking equipment. Transfer Pumps (12 Volt) There are 2 different models of transfer pumps available. TS-3 Transfer Unit (3.0 Gallons Per Minute) TS-5 Transfer Unit (5.0 Gallons Per Minute) TS-3 Both units include the following: Hangs on the side of a tote or 55 gallon drum 12 Volt Self Priming Pump with Pressure Switch 3 Valve 3.0 GPM (TS-3) 5 Valve 5.0 GPM (TS-5) 15 of Discharge Hose with Nozzle Valve 15 Power Cord with Battery Clips mounted on applicator www.dohrmannenterprises.com 7
Mounting kits LS-1 Mounting Kit The LS-1 Mounting Kit is designed for mounting the DE-55 or DE-100 Applicators on large square balers. This kit allows the applicator tank and frame to be mounted over the bale chute. Our mounting kit includes an easy to mount pump unit bracket, easy to mount nozzle plate (LS-1/NP) and upgrades of the in-line gauge from a 2 1/2 to a 4 liquid filled gauge (ILG-4), making it easy to read from the cab. Also included are longer lengths of hose and power cord needed for proper installation. LS-1 Mounting Bracket ILG-4 LS-1/NP JDRD Mounting Kit JDRD Mounting Brackets The JDRD is a mounting kit designed for mounting our DE-25 Applicator on John Deere Round Balers. This mounting kit may be adapted to be used for other round balers as well. The JDRD also includes two of our easy to mount #184 Round Baler Nozzle Brackets with U-Bolts for easier nozzle installation on round balers. NOTE: #184 Round Baler Nozzle Brackets are recommended for use with most makes of round balers. One is needed for each nozzle installed. #184 Round Baler Nozzle Bracket CM-1 Chopper Mount The CM-1 Chopper Mounting Kit is a universal mount designed to mount either a DE-45 or DE-25 Applicator on a pull-type chopper. Nuts and bolts are included. CM-1 Pull-Type Chopper Mounting Kit 8 (320) 252-8999
Moisture testers FX-2000 Series Moisture Testers The FX-2000 Series moisture testers from Delmhorst include an in-chamber moisture sensor to provide you with on-the-go readings. These units take 2 readings every second and update the readings every 4 seconds when attached to the in-chamber tester. They display the average and highest of eight accumulated readings on a backlit display. Measures moisture between 6% - 40%. FX-2000/PKG FX-2018/PKG (not pictured) Includes: Digital Display with 3 Year Manufacturer Warranty In-Chamber Moisture Sensor H-4 External Handle (for Prod and Windrow Prod) 10 Prod for H-4 Handle (FX-2000/PKG Only) 18 Prod for H-4 Handle (FX-2018/PKG Only) Windrow Prod for H-4 Handle Carrying Case FX-2000 Includes: Digital Display with 3 Year Manufacturer Warranty In-Chamber Moisture Sensor FX-2000/PKG FX-2000 F-2000 Series Moisture Testers The F-2000 Series moisture testers from Delmhorst are designed for portable use. These units average up to 100 accumulated readings. Measures moisture between 6% - 40%. F-2000/PKG F-2018/PKG (not pictured) Includes: Digital Display with 3 Year Manufacturer Warranty H-4 External Handle (for Prod and Windrow Prod) 10 Prod for H-4 Handle (F-2000/PKG Only) 18 Prod for H-4 Handle (F-2018/PKG Only) Windrow Prod for H-4 Handle Carrying Case F-2000 Includes: Digital Display with 3 Year Manufacturer Warranty 10 Prod (attaches directly to Digital Display) F-2000/PKG F-2000 www.dohrmannenterprises.com 9
Flow meters DigiFlow Digital Flowmeter Designed with the custom operator in mind, the DigiFlow is a digital flowmeter that includes a digital console with easy to read backlit display to mount in the cab. NOTE: NOT for use with water soluble bacterial products. In cab console Provides Flow Rate in Gallons, Liters or Pounds Per Hour Required Flow Rate: 5-140 GPH (18-540 LPH) Total Flow Reading (resettable) Provides total flow since last reset. Great for billing out product! DigiFlow Digital Flowmeter Easy-Cal System Allows user to calibrate system for their specific product regardless of density or viscosity Accurate calibration, assures proper product application/billing Ball Type Flowmeter Assemblies 3 Ranges Available: FL1-12: 2-12 GPH FL1-40: 4-40 GPH FL1-100: 10-100 GPH FL1- Flowmeter Assembly with Hose The FL Series Flowmeters are ball type flowmeters. These flowmeters are available in 3 different ranges and can be purchased as a complete assembly or as a replacement of existing ball type flowmeters. All of the flowmeter assemblies come complete with a mounting bracket, 20 of 3/8 braided hose, fittings and hose clamps. These flowmeters show the current application rate in gallons per hour. NOTE: The FL Series Flowmeters do not have a total flow reading (see the DigiFlow above for this and other features). 10 (320) 252-8999
Controls SP-1 Speed Control The SP-1 control module has an on-off switch with an LED on indicator with a dial that controls the speed of the pump. It will allow the operator to control the pressure and spray volume from the cab or away from the pump unit where required. Our SP-1 includes reverse polarity protection, a 10 amp resettable circuit breaker and swivel mounting kit. This unit works great on all 12 volt Ag-Serv Applicators. (Not for use with DE-1000) SP-1s Speed Control Similar to the SP-1 but includes a separate auxillary on/off switch for an additional accessory. Speed Control Digital Timers DT-1a 110 Volt Digital Timer This timer comes in a weather/dust resistant box and have standards extension cord plugs; this allows the timer to be mounted anywhere between the power source and the applicator using extension cords. DT-1a-12 12 Volt Digital Timer This timer operates on a 12 volt system. DT-1a Timer MT-1 Timer The MT-1 Timer is a manual wind-up spring timer. This unit can be set for a run time of up to 10 minutes and may be used on any 12 volt applicator. MT-1 Timer www.dohrmannenterprises.com 11
(320) 252-8999 316 33rd Ave South Waite Park, MN 56387 www.dohrmannenterprises.com CATALOG 2010 Dohrmann Enterprises, Inc.