COMELIT IP RAS (ios) Please read this manual thoroughly before use and keep it for future reference

COMELIT IP RAS (ios) Please read this manual thoroughly before use and keep it for future reference

CONTENTS 1. Introduction... 3 1.1 About COMELIT IP RAS... 3 1.2 System Requirements... 3 1.3 Support Devices... 3 2. App Installation... 3 3. Registration... 4 3.1 Device Registration... 5 3.1.1 Register IP Camera... 5 3.1.2 Register one channel of COMELIT RAS Solution (PC Client)... 5 3.1.3 Register one channel of IPNVR700A... 7 3.2 Group Registration... 8 3.3 Recorder Registration... 9 4. Operation... 10 4.1 Overview... 10 4.2 Functions... 11 5. Live View... 11 5.1 Device Live View... 11 5.1.1 Overview of Device Live view... 11 5.1.2 Device Live view functions... 12 5.2 Group Live View... 16

5.3 Recorder Live View... 16 5.3.1 Overview... 16 5.3.2 Recorder view functions... 17 6. Remote Replay... 17 6.1 Device Remote Replay... 17 6.1.1 Overview of Device Remote Replay... 17 6.1.2 Functions... 18 6.2 Recorder Remote Replay... 20 6.2.1 Overview of Recorder Remote Playback... 20 6.2.2 Functions... 20

1. Introduction 1.1 About COMELIT IP RAS COMELIT IP RAS is an ios based dedicated application for smartphones and tablet PCs to remotely monitor and control COMELIT s network based products. 1.2 System Requirements OS Processor Display Storage Network ios 4.0 or later ARMv7 compatible 320x480 pixels to 1080x1920 pixels (320dp to 1080dp) 25MB or more Wi-Fi or mobile network (3G or 4G) provided by the ios mobile device 1.3 Support Devices Category NETWORK CAMERA SOFTWARE NVR Model IPCAM791A, IPCAM794A IPCAM720A, IPCAM700A, IPCAM722A, IPCAM727A, IPCAM702A IPCAM742A, IPCAM767A, IPCAM752A IPPTZ773A, IPPTZ777A, IPPTZ779A COMELIT RAS Solution IPNVR700A IPNVR704A, IPNVR708A, IPNVR746A 2. App Installation 1. Open the Apple AppStore on your ios device. 2. In AppStore, enter COMELIT IP RAS in the search field. It can be also searched by COMELIT, COMELIT IP, COMELIT IP RAS SOLUTION, RAS SOLUTION. 3. Install COMELIT IP RAS application and open it.

3. Registration Run the COMELIT IP RAS Mobile program. Click the start button and Click the Add button. 1.Click the Start Button.. 2. Click the Add button.. 3. Device Registration menu will appear. Device: Register one channel for IP camera or Comelit RAS Solution software Group: Make the group with registered devices at Device registration part. Recorder: Register NVR.

3.1 Device Registration 3.1.1 Register IP Camera Available model IPCAM791A, IPCAM794A IPCAM720A, IPCAM700A, IPCAM722A, IPCAM727A, IPCAM702A IPCAM742A, IPCAM767A, IPCAM752A IPPTZ773A, IPPTZ777A, IPPTZ779A <Device info> Select the option like below at Device info part. Brand: COMELIT Model Type: IP Camera Model: Default Select only Default. Media: General - Both General and JPEG receive Stream2 from the IP camera. - H264 receives Stream3 from the IP Camera. Name: Enter the IP camera name to use in the COMELIT IP RAS mobile program. IP/URL: Enter the IP address. Port: Enter the Port number. Default number of IP camera is 80. <Device Option> ID, PW: Enter the ID and Password of the IP Camera. Show password: If you check the Show Password, Password number will be shown in the screen. 3.1.2 Register one channel of COMELIT RAS Solution (PC Client)

Available model Comelit RAS Solution <Device info> Select the option like below at Device info part. Brand: COMELIT Model Type: NVR Model: Software Do not select Default or Stand Alone. Media: H264 Name: Enter the Client name to use in the COMELIT IP RAS mobile program. IP/URL: Enter the IP address. Port: Enter the Port number. Default number of Comelit RAS Solution is 10554. <Device Option> ID, PW: Enter the ID and Password of the COMELIT RAS Solution. Channel: It will receive designated channel of COMELIT RAS Solution. If you enter 1, Ch1 video of COMELIT RAS Solution will be shown in the mobile. Show password: If you check the Show Password, Password number will be shown in the screen.

3.1.3 Register one channel of IPNVR700A Available model IPNVR700A only <Device info> Select the option like below at Device info part. Brand: COMELIT Model Type: NVR Model: Default Do not select Software. Media: General Both General and H264 are the same function. Name: Enter the IPNVR700A name to use in the COMELIT IP RAS mobile program. IP/URL: Enter the IP address. Port: Enter the Port number. Default number of IPNVR700A is 80. <Device Option> ID, PW: Enter the ID and Password of the IPNVR700A. Channel: It will receive designated channel of IPNVR700A. If you enter 1, Ch1 video of IPNVR700A will be shown in the mobile. Show password: If you check the Show Password, Password number will be shown in the screen.

3.2 Group Registration A number of registered network devices can be monitored as a group. Click the Group tap. <Group Info> Name: Enter the group name to use in the COMELIT IP RAS mobile program. Camera: Select the number of cameras which will belong to a group. You can select 2, 4, 6, 8, 12, 18, 20, 24 channels for each group. <Device> Selected device will be shown. 1.Click the Choose Device to register. 2.Check the Device that you would like to register 3.Registered device will be shown in the list. -

4. Back to the device list. Click Test group1. 5. video will be shown in one screen. 3.3 Recorder Registration User can monitor up 16 channel NVR. This function is available only for IPNVR704A, IPNVR708A, IPNVR746A. Available model IPNVR704A, IPNVR708A, IPNVR746A Brand: COMELIT Model Type: DVR Model: Default Media: General Both General and H264 are the same function. Address Type: Static IP/DDVRLS/DNS Depending on your network access environment, choose the type. - Static IP - DDVRLS (NVR should be registered DDVRLS)* - DNS DDVRLS: For this function, please refer to NVR manual. Max Channel: 4/8/16 channels Choose the channels you want to monitor. Stream: Secondary/Primary Choose the Stream you want to monitor. Name: Enter NVR name to use in the COMELIT IP RAS mobile program. Port: Enter the Port number. Default number of IPNVR704A, IPNVR708A, IPNVR746A is 9350.

<Recorder Option> ID, PW: Enter the ID and Password of the IPNVR704A, IPNVR708A, IPNVR746A. (Default is ID:admin/PW:admin) Show password: If you check the Show Password, Password number will be shown in the screen. 4. Operation 4.1 Overview Registered device list displays in the main screen. Back: Back to the start screen. Add: User can register the device. For the detail, please refer to 3.1 Device Registration in this manual.

4.2 Functions 1) Quick Menu User can setup or playback the recorded data by Quick menu. Touch the picture to pop up the quick menu. LIVE: The live video from the selected device will be displayed on the screen EDIT: Edit the device registration setup. DELETE: Delete the device. REMOTE REPLAY: Playback of Recorded data in device s SD card. 5. Live View 5.1 Device Live View 5.1.1 Overview of Device Live view Overview of Live view 1 Exit 2 Advanced menu 3 Zoom 4 Pan/Tilt 5 Freeze 6 Status 7 Screen Scale 8 Speaker 9 Snapshot 10 LED, MIC function 11 Digital Zoom

5.1.2 Device Live view functions 1) Exit Exit the live screen and return to the main screen. 2) Advanced Menu User can setup the Alarm, Preset, and Tour of PTZ camera by advanced menu. This function is only available for PTZ camera. Alarm You can setup the manual trigger. For the detail, please refer to IP Camera setup manual. Alarm Trigger: 1~4 Preset You can save camera directions as a Preset so that you can move the camera directly to a saved direction. Preset: 001~256 Tour : Tour 001~256 3) Zoom Zoom in or out on the video. Press Zoom bar on the screen and move up and down. This function is only available for PTZ camera.

4) Pan/Tilt User can control Pan and Tilt. This function is only available for PTZ camera. Drag the round in up/down/left/right direction to pan/tilt the camera. Pan/tilt range and level differ from camera to camera. Pan/tilt control result requires time for processing, since the command should reach camera device and performed by the camera. Video data size grows as the camera moves, which may result in delayed display. In 3G networks, it may take more than a few seconds to receive video data. In a network environment of poor stability, using pan/tilt control with lower video quality settings may help reduce such delays. 5) Freeze Freezes the current live images on the screen.

6) Status User can check the status of the device in real-time. Below information will appear in the screen. 7) Screen Scale User can change the screen scale. 8) Speaker By clicking Speaker button, you can hear the sound in the mobile phone. Only available for Audio support models. 9) Snapshot User can save the live image by snapshot function. 1.Click the snapshot button. 2.Snapshot images are saved under /Albums/ COMELIT IP RAS.

10) LED, MIC function LED By clicking LED button, you can turn ON/OFF of LED on your device. Only available for IPCAM791A MIC By clicking MIC button, you can send the sound remotely. Only available for Audio support models. 11) Digital Zoom Digital Zoom function can be performed in Live mode. 1.Double Touch the video. 2.Digital Zoom will active. 3.If you double touch the video again, the original video size will be returned.

5.2 Group Live View 1. Touch Live button on the quick menu. 2. Live Group view will appear. 3. If you touch one video, it will be changed to single channel mode. 5.3 Recorder Live View 5.3.1 Overview 1. Touch Live button on the quick menu. 2.NVR channel view will appear. 3. If you touch one video, it will be changed to single channel mode.

5.3.2 Recorder view functions Move the channels to Back and Forward. Change screen layout. (up to 16ch layout available) Select the desired layout from the list. For other functions such as Freeze, Snapshot etc, please refer to 5.1.2 Device Live View functions in this manual. 6. Remote Replay 6.1 Device Remote Replay User can playback and search recorded video in SD memory card inserted to IP camera. 6.1.1 Overview of Device Remote Replay 1.Click the image. 2. Click Remote Replay on the quick menu. 3. Device Remote Replay screen will appear.

6.1.2 Functions 1) Digital Zoom Digital Zoom function can be performed in replay mode. 1.Double Click the video. 2.Digital Zoom will active. 3.If you double touch the video, the video will be returned. 2) Playback Control 1 Fast Backward Play 2 Backward Play 3 Pause 4 Forward Play 5 Fast Forward Play 1 Fast Backward Play 5 Fast Forward Play Plays back recorded video fast backward or fast forward. 2 Backward Play 4 Forward Play Plays back recorded video backward or forward

3 Pause Pressing the button while playing back video pauses the video. 3) Calendar Search User can Search video for a specific date. Selecting a date displays the recorded data for that date in the timetable. The dates containing recorded images are enabled in the calendar. 1.Click the Search Button. 2. Click the date you want to playback. Dates that contain recording data are colored in Red. 3. Select the Time and Minute. Recorded data will be also marked on the Time and Minute. 4. Click Play button. 5.You can control the record video by playback control functions.

6.2 Recorder Remote Replay User can playback and search recorded video in NVR. 6.2.1 Overview of Recorder Remote Playback User can playback and search recorded video in NVR. 1.Click the image of NVR. 2. Click Remote Replay on the quick menu. 3. NVR Remote Replay screen will appear. 6.2.2 Functions (1) View mode change Move the channels to Back and Forward. Change screen layout. Select the desired layout from the list.

(2) Snapshot Click the Snapshot button on the screen. It will save and display snapshot of images recorded during NVR playback in the screen. Snapshot images are saved under /Albums/ COMELIT IP RAS. (3) Digital Zoom Please refer to 6.1.2 Functions in this manual. (4) Playback Control Please refer to 6.1.2 Functions in this manual. Via Don Arrigoni, 5 24020 Rovetta S. Lorenzo (Bergamo) http://www.comelitgroup.com e-mail: export.department@comelit.it