MaCaPS Access Control System November 2004 MaCaPS Access Control System MaCaPS Access Control System is designed for the protection of your valuable facility. The system is compatible with different types of card readers, e.g., Octopus, Mifare, HID, EM, Smart Card, RFID and etc. Compared with existing systems, the system has build-in intelligent servers for ON/OFF line group operation, to prevent interruption of service in case of workstation failure, and for fast and accuracy user authentication. Moreover, the system is embedded with TCP/IP connections for remote access via Internet. The smart access control system software has an user friendly graphic user interface, administrators can easily create and remove access cards; configure which door(s) an individual can enter during a pre-defined time period; define multiple time zone; remotely monitor door status, control door operations and generate comprehensive reports. General Features Direct Ethernet connection with a unique IP address Support Win98/Win2000/XP Real Time Transaction Display Support Smart Card, Proximity & RFID Comprehensive Reports Generation Remote Monitoring & Control Chinese/English Graphical User Interface Support Biometric Devices Three Years Battery Backup for Data Real Time Clock Display Retention Network Enabled High capacity Up to 23,000 User and Fast Data Transmission 23,000 Transaction Fast Restart Time E-mail Alert Multiple Time Zone Settings Client Connection Copyright 2004 MaCaPS International Limited http://www.macaps.com.hk Page 1
MaCaPS Access Control System November 2004 Specifications Software Reports Time Zone Holiday Access Methods Capacity Language Operating System Door Transaction Report User Information Report User In/Out Transaction Report Absent Report Late Arrival / Early Leave Report 128 User Configurable Time Zones 16 User Configurable Holidays Card Only / Card + PIN / Pin Only 23,000 Users / 23,000 Transactions English / Chinese Win98 / Win2000 / XP Event Server Communication Capacity Battery Backup Controllers Number Power Supply TCP/IP to PC Server, RS485 to Door Controller 23,000 Users / 23,000 Transactions 3 Years Up to 8 Door Controllers per Event Server 12VDC, 300 ma Door Controller I/O (Input / Output) Reader Types Power Supply 2 Reader Inputs (In Reader / Out Reader) 1 Door Lock Output (NO/NC Selectable) 1 Alarm Relay Output (NO/NC Selectable) 1 Door Release Button Input 1 Door Sensor Input Octopus, Proximity, Smart Card, & RFID etc. 12VDC, 200 ma Copyright 2004 MaCaPS International Limited http://www.macaps.com.hk Page 2
MaCaPS Smart Access Event Server November 2004 Smart Access Event Server MaCaPS Smart Access Event Server is a key component in transaction records. The event server will verify user Smart Access Control System. It stores user and access right according to previous user setting during online/offline mode. Server can support up to 8 door controllers on RS-485 network up to 1.2 km (4000 feet) in length and the Server is connected by TCP/IP point to the existing LAN system such that a central computer can monitor many Event Servers that installed in different area. - Support 23000 user Expand to 80000 - Each User can belong to 8 Access Group - Support 23000Transaction Expand to 80000-128 Group Setting - 128 Time Zones - 16 Holiday Periods - Battery Backup for Transactions (~3Year) - Watch dog protection function - Battery backup for System Clock (Keep running) - LEDs Display for communication monitoring of each door - Support TCP/IP connection (Base 10M) - Support 8 Door Controllers over RS485 network (1.2Km) Advantage : - High Data Transfer Rate (10Mbps) - Long Distance connection(1.2km) - Embedded Operation System - Fast start up speed( ~3s) - Small in Size(SMT) Copyright 2004 MaCaPS International Limited http://www.macaps.com.hk Page 3
MaCaPS Smart Access Door Controller November 2004 Smart Access Door Controller The Smart Access Door Controller is use to support door accessories as a single point, all the devices are connected to the door controller to minimize the devices cabling. The controller unlocks its respective door or gate only for authorized people during their assigned times and days. And it also helps for monitoring the door and alert the abnormal use. The Controller builds in intelligent to support different type of Card technology and also different card ID length. On the other hand, the door controller can support multi-security level. Such as Unlock Door, Card, Card + PIN and Lock the Door. RS485 connection (Up to 1.2Km) Support In and Out Wiegand Reader Support Proximity, HID, Mifare Reader Door Sensor input Door release button input Electronic lock control Alarm output Copyright 2004 MaCaPS International Limited http://www.macaps.com.hk Page 4
MaCaPS Mifare LCD Contactless Card Reader November 2004 MaCaPS Mifare Contactless Card Reader MaCaPS Reader is an intelligent reader/writer to read and write contactless Mifare Smart Card. It adopts the widely recognized Mifare technology. It is designed for a series of MaCaPS Contactless Smart Card Solution and is suitable for customers to develop their own application. - RS232, USB, Wiegand output available - Data Read/Write Function by RS232 port or USB port - Two LEDs (Red, Green) Indicator - Build-in sound beeper - Up to 50mm card read/write operation range - Fast verification time < 0.2 sec. - Store and Protect Card Key - True anti-collision - Key Store Specification: Power Supply: 5VDC, 100mAmax Read Range: 50 mm (Under standard 4 cores Mifare Smartcard) Transmit Frequency: 13.56 MHz Compatible Card: ISO 14443 Type-A (Mifare) Operating Temperature: 0 C to + 40 C Control Format : RS-232 Wiegand USB Dimension: 85 (W) X85 (L) X 22 (H) mm Color: Black, Gray and Blue Copyright 2004 MaCaPS International Limited http://www.macaps.com.hk Page 5
MaCaPS Mifare LCD Contactless Card Reader November 2004 MaCaPS Mifare LCD Contactless Card Reader MaCaPS MIFARE LCD Contactless Card Reader builds in LCD display, Keypad, EEPROM, LEDs and Buzzer control. It is designed for a series of MaCaPS contactless smart card solutions to suitable for Time Attendance System, Access Control System and Payment System. - RS485 output format - Build in 4 x 16 LCD display with backlight - 3x4 Keypad - Two LEDs (Red, Green) indicators - Built-in sound beeper - Up to 50 mm card read/write operation range - Fast verification time < 0.2 sec. - Easy integration with most access control systems - EEPROM Memory store (128byte 8kbyte) - Build in Tamper sensor - Store and Protect Card Key Specification: Power Supply: 7-12VDC, 150mAmax Read Range: 50 mm (Under standard 4 cores Mifare Smartcard) Operating Temperature 0 C to + 40 C Control Format: RS-485 Dimension: 162mm 110mm 35mm Color: Black & Gray Copyright 2004 MaCaPS International Limited http://www.macaps.com.hk Page 6