Automatic drilling and insertion machines Blue Max Modular

Automatic drilling and insertion machines Blue Max Modular

Publisher's imprint: Hettich FurnTech GmbH & Co. KG 32602 Vlotho Germany We reserve all rights to this catalogue under copyright law. It shall not be permissible to duplicate this catalogue in any form either in whole or in part without our written consent. Subject to technical alterations. Pictures could show mounted accessories. Errors and omissions excepted. Subject to colour variations. March 2010 Bestell-Nr. 9 110 896

Catalogue summary The machine system for newcomers and advancing users Blue Max Modular Page 2-5 Blue Max Modular Professional Page 6-9 Blue Max Modular Advanced Plus Blue Max Modular Advanced Blue Max Modular Basic Plus Blue Max Modular Basic Blue Max Modular Page 10-13 Page 14-17 Page 18-21 Page 22-25 Page 26-33 Basic Basic Plus Advanced Advanced Plus Professional 1

The machine system for newcomers and advancing users Blue Max Modular 2

Five configuration levels for tailor-made machinery Whether it's the Basic, Basic Plus, Advanced, Advanced Plus or Professional, Hettich's "Blue Max Modular" facilitates precision craftsmanship in the workshop. Exchangeable drilling units on all modules save time preparing for different jobs. Straightforward machine setting and pneumatic hold-down clamps optimise work flows. The new modular system is geared to the specific needs of the fabricator. Whichever version is chosen, it saves time, optimises precision and facilitates overall handling. 3

Range summary / Technical comparison i Motor power rating Interchangeable drilling unit Capability of using hole-line unit turned through 90 Professional 1,6 kw (2,1 PS) 380 Volt / 50 Hz / 3 -phase Hole lines Hinges Mounting plates Connecting fittings Drawer front connections Advanced Plus 1,6 kw (2,1 PS) 380 Volt / 50 Hz / 3 -phase Hole lines Hinges Mounting plates Connecting fittings Drawer front connections Advanced 1,6 kw (2,1 PS) 380 Volt / 50 Hz / 3 -phase Hole lines Hinges Mounting plates Connecting fittings Drawer front connections - Basic Plus 1,6 kw (2,1 PS) 380 Volt / 50 Hz / 3 -phase Hole lines Hinges Mounting plates Connecting fittings Drawer front connections Basic 1,6 kw (2,1 PS) 380 Volt / 50 Hz / 3 -phase Hole lines Hinges Mounting plates Connecting fittings Drawer front connections - Interchangeable drilling unit / Press-in frame see pages 26-28 Stop support / System 32 hole-spacing bar see page 29 4 www.hettich.com

i Blue Max Modular Range summary / Technical comparison Pneumatic workpiece holddown clamp Work bench Pneumatic caterpillar drive LCD display Side adjustment Depth adjustment Horizontal drilling unit 560 x 3000 mm 2250 mm 550 mm 560 x 3000 mm - 2250 mm 550 mm 300 x 3000 mm - 2250 mm 90 mm 560 x 800 mm - - 550 mm 300 x 800 mm - - - 90 mm Stops / Laser / Insertion dies / Various accessories see pages 30-32 Drill bits see pages 32-33 Technik für Möbel 5

Professional Pneumatic hold-down clamp for fixing workpiece Rapid depth adjustment using latch levers for: Drilling hinge holes Drilling hole lines Mounting plates Connecting fittings Depth adjustment of up to 550 mm facilitates the machining of large workpieces Interchangeable drilling units provide the capability of adapting hole patterns and save resetting time. Workpieces are machined quickly and in full. Hinges: Drill holes / press-in type Mounting plates: Drill holes / press-in type Connecting fittings: Drill holes / press-in type Runners: Drill holes System 32 hole lines: Drill holes Caterpillar drive for hole lines with individually adjustable cam actuation for variable hole line patterns 2250 mm side adjustment is used exactly and quickly simply by repositioning the handle and turning the spindle. There is no need to move the workpiece! 6 www.hettich.com

Professional Fast and straightforward setting of the drilling depth Straightforward machine setting for quickly optimising various work operations Optimum travel for drilling and inserting Shorter distances for hole-line drillings with continuation stop Professional Surface for holding tool and fittings The 5-spindle horizontal drilling unit allows you to drill holes for connecting fittings and wooden dowels at one and the same time Digital display of hole pattern to the accuracy of one tenth of a millimetre Technik für Möbel 7

Professional 2250 250 3040 Technical brief: 1050 Motor power rating of vertical drilling unit: 1,6 kw (2,1 PS) Motor power rating of horizontal drilling unit: 0,75 kw (1 PS) Voltage: 380 Volt, 3 -phase Insertion pressure at 6 bar: 296 kg Weight without horizontal drilling unit: 176 kg Weight with horizontal drilling unit: 199 kg Diameter of connection for chip extractor: 100 mm Volumetric flow: 141 m 3 / h Air consumption: 1,2 litres / lift Work bench: 3080 x 620 mm Recommended base-unit height: 850 mm 1650 8 www.hettich.com

Professional Blue Max Modular Professional with horizontal drilling unit 9 079 441 1 without horizontal drilling unit 9 083 833 1 Stop support set 9 110 901 1 Interchangeable drilling unit for System 32, 19 spindles 9 079 508 1 Interchangeable drilling unit for System 32, 19 spindles with quick-change chuck 9 083 836 1 Interchangeable drilling unit for System 32, 9 spindles 9 079 506 1 Interchangeable drilling unit for System 32, 9 spindles with quick-change chuck 9 083 835 1 Interchangeable drilling unit for System 32, 5 spindles 9 079 482 1 Interchangeable drilling unit for System 32, 5 spindles with quick-change chuck 9 084 003 1 Interchangeable drilling unit for hinges 9 079 509 1 Interchangeable drilling unit for hinges with quick-change chuck 9 083 837 1 Interchangeable drilling unit VB with quick-change chuck 9 079 477 1 Press-in frame for interchangeable drilling unit hinge and connecting fitting 9 079 479 1 Professional Additional hold-down clamp for horizontal drilling unit 0 065 563 1 Extension set for hold-down clamp 9 099 165 1 set Insertion dies Hinge range sensys 9 096 819 1 Hinge ranges Intermat, Ecomat, Slide-on 0 061 355 1 Hinge range Selekta Pro 2000 0 010 079 1 Connecting fittings VB 18 / 19 / 20 / 21 0 061 289 1 Connecting fittings VB 36 0 068 637 1 Drawer front connections MultiTech 0 040 129 1 For drill bits, see pages 32-33 Centre stop, width 235 mm 9 079 481 1 Centre stop, short, width 195 mm 9 110 899 1 Right-hand tilt stop for dimensioned extension fence 0 061 351 1 Left-hand tilt stop for dimensioned extension fence 0 061 353 1 Laser with 3D ball-head holder 9 079 513 1 2D aluminium holder 9 099 041 1 Further accessories, see pages 26-33 Technik für Möbel 9

Advanced Plus Pneumatic hold-down clamp for fixing workpiece Rapid depth adjustment using latch levers for: Drilling hinge holes Drilling hole lines Mounting plates Connecting fittings Depth adjustment of up to 550 mm facilitates the machining of large workpieces Interchangeable drilling units provide the capability of adapting hole patterns and save resetting time. Workpieces are machined quickly and in full. Hinges: Drill holes / press-in type Mounting plates: Drill holes / press-in type Connecting fittings: Drill holes / press-in type Runners: Drill holes System 32 hole lines: Drill holes Manual side adjustment with variable cam actuation for any chosen holeline pattern as well as rotatable, adjustable latch lever profile for various basic settings 2250 mm side adjustment is used exactly and quickly simply by repositioning the handle and turning the spindle. There is no need to move the workpiece! 10 www.hettich.com

Advanced Plus Fast and straightforward setting of the drilling depth Straightforward machine setting for quickly optimising various work operations Optimum travel for drilling and inserting Shorter distances for hole-line drillings with continuation stop Advanced Plus Surface for holding tool and fittings The 5-spindle horizontal drilling unit allows you to drill holes for connecting fittings and wooden dowels at one and the same time Digital display of hole pattern to the accuracy of one tenth of a millimetre Technik für Möbel 11

Advanced Plus 2250 250 3040 Technical brief: 1050 Motor power rating of vertical drilling unit: 1,6 kw (2,1 PS) Motor power rating of horizontal drilling unit: 0,75 kw (1 PS) Voltage: 380 Volt, 3 -phase Insertion pressure at 6 bar: 296 kg Weight without horizontal drilling unit: 155 kg Weight with horizontal drilling unit: 178 kg Diameter of connection for chip extractor: 100 mm Volumetric flow: 141 m 3 / h Air consumption: 1,2 litres / lift Work bench: 3080 x 620 mm Recommended base-unit height: 850 mm 1650 12 www.hettich.com

Advanced Plus Blue Max Modular Advanced Plus with horizontal drilling unit 9 084 913 1 without horizontal drilling unit 9 079 440 1 Stop support set 9 110 901 1 Interchangeable drilling unit for System 32, 19 spindles 9 079 508 1 Interchangeable drilling unit for System 32, 19 spindles with quick-change chuck 9 083 836 1 Interchangeable drilling unit for System 32, 9 spindles 9 079 506 1 Interchangeable drilling unit for System 32, 9 spindles with quick-change chuck 9 083 835 1 Interchangeable drilling unit for hinges 9 079 509 1 Interchangeable drilling unit for hinges with quick-change chuck 9 083 837 1 Interchangeable drilling unit VB with quick-change chuck 9 079 477 1 Press-in frame for interchangeable drilling unit hinge and connecting fitting 9 079 479 1 Advanced Plus Additional hold-down clamp for horizontal drilling unit 0 065 563 1 Extension set for hold-down clamp 9 099 165 1 set Insertion dies Hinge range sensys 9 096 819 1 Hinge ranges Intermat, Ecomat, Slide-on 0 061 355 1 Hinge range Selekta Pro 2000 0 010 079 1 Connecting fittings VB 18 / 19 / 20 / 21 0 061 289 1 Connecting fittings VB 36 0 068 637 1 Drawer front connections MultiTech 0 040 129 1 For drill bits, see pages 32-33 Centre stop, width 235 mm 9 079 481 1 Centre stop, short, width 195 mm 9 110 899 1 Right-hand tilt stop for dimensioned extension fence 0 061 351 1 Left-hand tilt stop for dimensioned extension fence 0 061 353 1 Laser with 3D ball-head holder 9 079 513 1 2D aluminium holder 9 099 041 1 Further accessories, see pages 26-33 Technik für Möbel 13

Advanced Pneumatic hold-down clamp for fixing workpiece Interchangeable drilling units provide the capability of adapting hole patterns and save resetting time. Workpieces are machined quickly and in full. Hinges: Drill holes / press-in type Mounting plates: Drill holes / press-in type Connecting fittings: Drill holes / press-in type Runners: Drill holes System 32 hole lines: Drill holes Manual side adjustment with variable cam actuation for any chosen holeline pattern as well as rotatable, adjustable latch lever profile for various basic settings 2250 mm side adjustment is used exactly and quickly simply by repositioning the handle and turning the spindle. There is no need to move the workpiece! 14 www.hettich.com

Advanced Fast and straightforward setting of the drilling depth Straightforward machine setting for quickly optimising various work operations Optimum travel for drilling and inserting Shorter distances for hole-line drillings with continuation stop Surface for holding tool and fittings Advanced The 5-spindle horizontal drilling unit allows you to drill holes for connecting fittings and wooden dowels at one and the same time Digital display of hole pattern to the accuracy of one tenth of a millimetre Technik für Möbel 15

Advanced 2250 250 3040 Technical brief: 1050 Motor power rating of vertical drilling unit: 1,6 kw (2,1 PS) Motor power rating of horizontal drilling unit: 0,75 kw (1 PS) Voltage: 380 Volt, 3 -phase Insertion pressure at 6 bar: 296 kg Weight without horizontal drilling unit: 125 kg Weight with horizontal drilling unit: 148 kg Diameter of connection for chip extractor: 100 mm Volumetric flow: 141 m 3 / h Air consumption: 1,2 litres / lift Work bench: 3080 x 620 mm Recommended base-unit height: 850 mm 800 16 www.hettich.com

Advanced Blue Max Modular Advanced with horizontal drilling unit 9 084 912 1 without horizontal drilling unit 9 079 439 1 Stop support set 9 110 901 1 Interchangeable drilling unit for System 32, 19 spindles 9 079 508 1 Interchangeable drilling unit for System 32, 19 spindles with quick-change chuck 9 083 836 1 Interchangeable drilling unit for System 32, 9 spindles 9 079 506 1 Interchangeable drilling unit for System 32, 9 spindles with quick-change chuck 9 083 835 1 Interchangeable drilling unit for hinges 9 079 509 1 Interchangeable drilling unit for hinges with quick-change chuck 9 083 837 1 Interchangeable drilling unit VB with quick-change chuck 9 079 477 1 Press-in frame for interchangeable drilling unit hinge and connecting fitting 9 079 479 1 Additional hold-down clamp for horizontal drilling unit 0 065 563 1 Extension set for hold-down clamp 9 099 165 1 set Insertion dies Hinge range sensys 9 096 819 1 Hinge ranges Intermat, Ecomat, Slide-on 0 061 355 1 Hinge range Selekta Pro 2000 0 010 079 1 Connecting fittings VB 18 / 19 / 20 / 21 0 061 289 1 Connecting fittings VB 36 0 068 637 1 Drawer front connections MultiTech 0 040 129 1 Advanced For drill bits, see pages 32-33 Centre stop, width 235 mm 9 079 481 1 Centre stop, short, width 195 mm 9 110 899 1 Right-hand tilt stop for dimensioned extension fence 0 061 351 1 Left-hand tilt stop for dimensioned extension fence 0 061 353 1 Laser with 3D ball-head holder 9 079 513 1 2D aluminium holder 9 099 041 1 Further accessories, see pages 26-33 Technik für Möbel 17

Basic Plus Rapid depth adjustment using latch levers for: Drilling hinge holes Drilling hole lines Mounting plates Connecting fittings Depth adjustment of up to 550 mm facilitates the machining of large workpieces Interchangeable drilling units provide the capability of adapting hole patterns and save resetting time. Workpieces are machined quickly and in full. Hinges: Drill holes / press-in type Mounting plates: Drill holes / press-in type Connecting fittings: Drill holes / press-in type Runners: Drill holes System 32 hole lines: Drill holes Optional extension fences for increasing workbench size Pneumatic hold-down clamp for fixing workpiece Interchangeable System 32 drilling unit with continuation stops for drilling hole lines quickly and conveniently 18 www.hettich.com

Basic Plus Fast and straightforward setting of the drilling depth Straightforward machine setting for quickly optimising various work operations Optimum travel for drilling and inserting Shorter distances for hole-line drillings with continuation stop Surface for holding tool and fittings Digital display of hole pattern to the accuracy of one tenth of a millimetre Basic Plus The 5-spindle horizontal drilling unit allows you to drill holes for connecting fittings and wooden dowels at one and the same time Technik für Möbel 19

Basic Plus 550 980 1540 Technical brief: 250 Motor power rating of vertical drilling unit: 1,6 kw (2,1 PS) Motor power rating of horizontal drilling unit: 0,75 kw (1 PS) Voltage: 380 Volt, 3 -phase Insertion pressure at 6 bar: 296 kg Weight without horizontal drilling unit: 95 kg Weight with horizontal drilling unit: 118 kg Diameter of connection for chip extractor: 100 mm Volumetric flow: 141 m 3 / h Air consumption: 1,2 litres / lift Work bench: 800 x 970 mm Recommended base-unit height: 950 mm 800 20 www.hettich.com

Basic Plus Blue Max Modular Basic Plus with horizontal drilling unit 9 084 911 1 without horizontal drilling unit 9 079 438 1 Interchangeable drilling unit for System 32, 19 spindles 9 079 508 1 Interchangeable drilling unit for System 32, 19 spindles with quick-change chuck 9 083 836 1 Interchangeable drilling unit for System 32, 9 spindles 9 079 506 1 Interchangeable drilling unit for System 32, 9 spindles with quick-change chuck 9 083 835 1 Interchangeable drilling unit for hinges 9 079 509 1 Interchangeable drilling unit for hinges with quick-change chuck 9 083 837 1 Interchangeable drilling unit VB with quick-change chuck 9 079 477 1 Press-in frame for interchangeable drilling unit hinge and connecting fitting 9 079 479 1 Set of continuation stops for interchangeable drilling unit hinge and connecting fitting 9 079 480 1 Additional hold-down clamp for horizontal drilling unit 0 065 563 1 Extension set for hold-down clamp 9 099 165 1 set Insertion dies Hinge range sensys 9 096 819 1 Hinge ranges Intermat, Ecomat, Slide-on 0 061 355 1 Hinge range Selekta Pro 2000 0 010 079 1 Connecting fittings VB 18 / 19 / 20 / 21 0 061 289 1 Connecting fittings VB 36 0 068 637 1 Drawer front connections MultiTech 0 040 129 1 For drill bits, see pages 32-33 Centre stop, width 235 mm 9 079 481 1 Centre stop, short, width 195 mm 9 110 899 1 Right-hand tilt stop for dimensioned extension fence 0 061 351 1 Left-hand tilt stop for dimensioned extension fence 0 061 353 1 Pendulum stop for left / right-hand dimensioned fence 0 061 285 1 2000 mm scaled fence extension 0 061 268 1 2000 mm unscaled fence extension 0 061 831 1 Basic Plus Kit for converting from hand operation to foot operation 9 096 788 1 Laser with 3D ball-head holder 9 079 513 1 2D aluminium holder 9 099 041 1 Further accessories, see pages 26-33 Technik für Möbel 21

Basic Interchangeable drilling units provide the capability of adapting hole patterns and save resetting time. Workpieces are machined quickly and in full. Hinges: Drill holes / press-in type Mounting plates: Drill holes / press-in type Connecting fittings: Drill holes / press-in type Runners: Drill holes System 32 hole lines: Drill holes Pneumatic hold-down clamp for fixing workpiece Optional extension fences for increasing workbench size Interchangeable System 32 drilling unit with continuation stops for drilling hole lines quickly and conveniently 22 www.hettich.com

Basic Fast and straightforward setting of the drilling depth Straightforward machine setting for quickly optimising various work operations Optimum travel for drilling and inserting Shorter distances for hole-line drillings with continuation stop Surface for holding tool and fittings Basic The 5-spindle horizontal drilling unit allows you to drill holes for connecting fittings and wooden dowels at one and the same time Technik für Möbel 23

Basic 800 Technical brief: 950 Motor power rating of vertical drilling unit: 1,6 kw (2,1 PS) Motor power rating of horizontal drilling unit: 0,75 kw (1 PS) Voltage: 380 Volt, 3 -phase Insertion pressure at 6 bar: 296 kg Weight without horizontal drilling unit: 75 kg Weight with horizontal drilling unit: 98 kg Diameter of connection for chip extractor: 80 mm Volumetric flow: 141 m 3 / h Air consumption: 1,2 litres / lift Work bench: 800 x 700 mm Recommended base-unit height: 950 mm 700 24 www.hettich.com

Basic Blue Max Modular Basic with horizontal drilling unit 9 084 910 1 without horizontal drilling unit 9 079 436 1 Interchangeable drilling unit for System 32, 19 spindles 9 079 508 1 Interchangeable drilling unit for System 32, 19 spindles with quick-change chuck 9 083 836 1 Interchangeable drilling unit for System 32, 9 spindles 9 079 506 1 Interchangeable drilling unit for System 32, 9 spindles with quick-change chuck 9 083 835 1 Interchangeable drilling unit for hinges 9 079 509 1 Interchangeable drilling unit for hinges with quick-change chuck 9 083 837 1 Interchangeable drilling unit VB with quick-change chuck 9 079 477 1 Press-in frame for interchangeable drilling unit hinge and connecting fitting 9 079 479 1 Interchangeable drilling unit for System 32 hole line, hinge and connecting fitting, 8 spindles 9 084 918 1 Press-in frame for interchangeable drilling unit, 8 spindles 9 096 806 Set of continuation stops for interchangeable drilling unit hinge and connecting fitting 9 079 480 1 Additional hold-down clamp for horizontal drilling unit 0 065 563 1 Extension set for hold-down clamp 9 099 165 1 set Insertion dies Hinge range sensys 9 096 819 1 Hinge ranges Intermat, Ecomat, Slide-on 0 061 355 1 Hinge range Selekta Pro 2000 0 010 079 1 Connecting fittings VB 18 / 19 / 20 / 21 0 061 289 1 Connecting fittings VB 36 0 068 637 1 Drawer front connections MultiTech 0 040 129 1 For drill bits, see pages 32-33 Centre stop, width 235 mm 9 079 481 1 Centre stop, short, width 195 mm 9 110 899 1 Right-hand tilt stop for dimensioned extension fence 0 061 351 1 Left-hand tilt stop for dimensioned extension fence 0 061 353 1 Pendulum stop for left / right-hand dimensioned fence 0 061 285 1 2000 mm scaled fence extension 0 061 268 1 2000 mm unscaled fence extension 0 061 831 1 Basic Kit for converting from hand operation to foot operation 9 096 788 1 Laser with 3D ball-head holder 9 079 513 1 2D aluminium holder 9 099 041 1 Further accessories, see pages 26-33 Technik für Möbel 25

Interchangeable drilling unit for System 32 hole line For depthwise hole-line drillings and hardware drillings Suitable for equipping with continuation stops Number of spindles 9 without quick-change chuck 9 079 506 1 19 without quick-change chuck 9 079 508 1 9 with quick-change chuck 9 083 835 1 19 with quick-change chuck 9 083 836 1 9 spindles R L R L R L R L R 32 8 x 32 = 256 19 spindles L R L R R R L R L 32 18 x 32 = 576 Continuation stop For Blue Max Modular interchangeable drilling unit with 8, 9 or 19 spindles 9 079 480 1 set Needs to be ordered separately For drill bits, see page 32-33 26 www.hettich.com

Interchangeable drilling unit for System 32 hole line with 5 spindles For automatic hole lines drillings Adapted for working with pneumatic caterpillar drive for automatic lateral traversal Article without quick-change chuck 9 079 482 1 with quick-change chuck 9 084 003 1 R L R L R 32 4 x 32 = 128 Interchangeable drilling unit for System 32 hole lines / hinges / connecting fittings with 8 spindles For automatic drilling and insertion machine Blue Max Modular Basic For drilling depthwise hole lines and hardware holes For TH 53 and T 43 hinge hole pattern Ready-prepared for fitting press-in frames Suitable for fitting continuation stops 9 084 918 1 R L R L R 32 52 L 5,5 32 R R Blue Max Modular Kombi press-in frame, interchangeable drilling unit for System 32 hole line / hinge / connecting fittings with 8 spindles For fitting with Blue Max insertion dies, see page 31 9 096 806 1 Technik für Möbel 27

Interchangeable drilling unit for hinges For TH 53 and T43 hinge hole pattern, e.g. sensys, Intermat, Ecomat and Slide-on hinge ranges (interchangeable drilling unit for other hinge hole patterns on request) Prepared for press-in mounting frame Further hinge hole patterns on request Article without quick-change chuck 9 079 509 1 with quick-change chuck 9 083 837 1 C L R L 5,5 52 Interchangeable drilling unit for System 32 hole line with 4 spindles With quick-change chuck for fast changeover E.g. for mounting VB connecting fittings, InLine mounting plates for hinges, MultiTech drawer-front connectors etc. Prepared for press-in mounting frame 9 079 477 1 32 32 L R L 32 Blue Max Modular press-in frame Can be used with Blue Max Modular interchangeable drilling units, hinge and System 32 hole line with 4 spindles For fitting with Blue Max insertion dies 9 079 479 1 28 www.hettich.com

Stop support For mounting to Blue Max Modular Advanced / Advanced Plus and Professional drilling and insertion machines For optionally reinforcing stop profile in conjunction with long workpieces 9 110 901 1 set System 32 hole-spacing bar For mounting to Blue Max Modular Advanced / Advanced Plus and Professional drilling and insertion machines For actuating side adjustment facility on the machine (System 32) in conjunction with cam set, order no. 9 110 903, see below 9 110 902 1 Set of cams For mounting to System 32 hole-spacing bar, order no. 9 110 902, see above Set of 10 individual cams 9 110 903 1 set Individual cam with clamping block For mounting to Blue Max Modular Advanced / Advanced Plus and Professional drilling and insertion machines For optionally upgrading number of cams 9 110 906 1 Technik für Möbel 29

Centre stop Blue Max Modular Left and right-hand stop with independent threads for individual positioning Length mm 195 9 110 899 1 235 9 079 481 1 Pendulum stop for fence Right-hand / left-hand 0 061 285 1 Tilt stop for fence Article Right 0 061 351 1 Left 0 061 353 1 Laser with 3D ball-head holder For exact positioning of workpieces with marked hole pattern Easy to install, battery-operated (1 x AA, 1,5 V or storage battery 1,2 V) Black plastic 9 079 513 1 2D aluminium holder For optional conversion of plastic 3-D ball-head holder 9 099 041 1 30 www.hettich.com

Elbow lever For fixing workpiece firmly in place Mounts to side of table profiles 9 096 786 1 Clamping lever For fitting to depth adjustment facility on Blue Max Basic Plus / Advanced Plus and Professional drilling and insertion machines For locking a latch lever in any setting for depth position 9 096 787 1 Cam setting gauge For positioning cams for hole-line unit with 9 and 19 spindles For Blue Max Advanced / Advanced Plus and Professional drilling and insertion machines 9 096 973 1 Insertion dies Insertion die for Hinges from sensys range with TH 53 and TB 53 cup 9 096 819 1 Hinges from Intermat, Ecomat and Slide-on range with T 43 cup 0 061 355 1 Hinges from Selekta Pro 2000 range with T 23 cup 0 010 079 1 Connecting fittings VB 18 / 19 / 20 / 21 0 061 289 1 Connecting fittings VB 36 0 068 637 1 Drawer front connections MultiTech 0 040 129 1 Technik für Möbel 31

Work top extension Length 2000 mm Can be used for left and right Article Fence with scale 0 061 268 1 Fence without scale 0 061 831 1 Plastic profile, red 0 061 832 1 Foot switch for Blue Max Modular For optionally retrofitting to Blue Max Modular Basic and Basic Plus For converting from hand operation to foot operation 9 096 788 1 Metal support for Blue Max Modular Basic Optional upgrade for holding tools and fittings 9 110 900 1 Drilling pins Turning clockwise and anticlockwise = can be used on both sides! Outstanding service life, similar to diamond-tipped drill bits Long resharpening zone Length 57,5 mm Shaft diameter 10 mm Diameter mm 8,0 9 079 424 1 6,0 9 079 422 1 5,0 9 079 420 1 3,0 9 079 417 1 2,5 9 079 414 1 32 www.hettich.com

Solid tungsten carbide tipped drill bits For less drilling effort Easily resharpened Enhanced drill-bit rigidity and stability Drilling direction marked in colour right = black, left = orange Length 57 mm Shaft diameter 10 mm Diameter mm right left 40,0 9 106 121 1 35,0 9 106 101 9 106 120 1 30,0 9 106 103 9 106 105 1 26,0 9 106 119 9 106 118 1 25,0 9 106 117 9 106 116 1 24,0 9 106 115 9 106 114 1 20,0 9 106 104 9 106 113 1 19,0 9 106 112 9 106 111 1 18,0 9 106 110 9 106 108 1 15,0 9 106 102 9 106 107 1 Set of drill bits VB 18 / 19 / 20 / 21 1 x 30 mm right / 2 x 10 mm left 9 110 905 1 set Drill bits, tungsten carbide tipped Turning clockwise or anticlockwise Drilling direction marked in colour right = black, left = orange Length 57 mm Shaft diameter 10 mm Diameter mm right left 40,0 0 069 250 1 35,0 0 053 955 0 074 438 1 35,0 (without centring pin) 0 072 404 1 30,0 0 069 251 0 053 954 1 26,0 0 061 650 0 058 962 1 25,0 0 053 945 1 24,0 0 078 963 0 052 987 1 20,0 0 053 944 0 053 953 1 19,0 0 078 042 0 052 986 1 18,0 0 073 099 0 073 143 1 15,0 0 053 943 0 061 651 1 14,0 0 053 941 0 053 942 1 12,0 0 053 819 0 053 820 1 10,0 0 053 952 0 053 951 1 8,0 0053817 0053818 1 7,5 0 061 652 0 061 653 1 7,0 0 071 722 0 071 721 1 6,0 0 072 039 0 072 040 1 5,0 0 053 950 0 053 949 1 4,0 0 072 163 0 071 723 1 3,0 0 070 025 0 070 026 1 2,0 0 071 897 0 071 896 1 Drill bits, tungsten carbide tipped For socket drill holes Diameter 8 mm Length 50 mm Turning clockwise Shaft diameter 10 mm 0 058 961 1 Drill bits, tungsten carbide tipped For horizontal boring unit Diameter 8 mm Length 70 mm Turning clockwise or anticlockwise Drilling direction marked in colour right = black, left = orange Shaft diameter 10 mm right left 0 065 561 0 065 562 1 Spare quick-change chuck 0 061 256 1 Version For standard machine chuck 0 076 497 For quick-change chuck 0 040 657 1 Technik für Möbel 33

www.hettich.com 9 110 896-Blue Max Modular HFT-03/2010 EN