PowerCAMPUS Hardware and Software Requirements 7.4, Revision 1 July 2011 1
Trademark, Publishing Statement and Copyright Notice SunGard or its subsidiaries in the U.S. and other countries is the owner of numerous marks, including SunGard, the SunGard logo, Banner, PowerCAMPUS, Advance, Luminis, DegreeWorks, fsaatlas, Course Signals, and Open Digital Campus. Other names and marks used in this material are owned by third parties. 2010 2011 SunGard. All rights reserved. Contains confidential and proprietary information of SunGard and its subsidiaries. Use of these materials is limited to SunGard Higher Education licensees, and is subject to the terms and conditions of one or more written license agreements between SunGard Higher Education and the licensee in question. In preparing and providing this publication, SunGard Higher Education is not rendering legal, accounting, or other similar professional services. SunGard Higher Education makes no claims that an institution's use of this publication or the software for which it is provided will insure compliance with applicable federal or state laws, rules, or regulations. Each organization should seek legal, accounting and other similar professional services from competent providers of the organization s own choosing. This PDF is certified for use with Adobe Readers, version 6.x and higher. Some elements of this PDF may not render properly when viewed using earlier versions of the Acrobat Reader, or with other PDF viewing applications. Prepared by: SunGard Higher Education 4 Country View Road Malvern, Pennsylvania 19355 United States of America (800) 522-4827 Customer Support Center Website http://connect.sungardhe.com Documentation Feedback http://education.sungardhe.com/survey/documentation.html Distribution Services E-mail Address distserv@sungardhe.com Revision History Log Publication Date Summary May 2011 New version in support of PowerCAMPUS 7.4. July 15, 2011 The PowerFAIDS database does not need to be set to SQL 2000 compatibility mode. 2
Contents 1 Overview... 5 2 Software Compatibility... 6 The College Board PowerFAIDS... 6 Microsoft Dynamics GP... 6 Blackboard... 6 3 Database Requirements... 7 CPU Size... 8 RDB Memory Sizing Recommendations... 8 RDB Disk Sizing Recommendations... 8 RDB Backup and Failover Recommendation... 9 Networking... 9 4 PowerCAMPUS Self-Service Requirements... 10 CPU Size... 11 Memory... 11 Disk Space and Configuration... 11 5 PowerCAMPUS Portal Requirements... 12 CPU Size... 13 Memory... 13 Disk Space and Configuration... 13 6 Terminal Services... 14 CPU Size... 15 Memory... 15 Disk Space and Configuration... 15 3
7 Workstation Requirements... 16 CPU Size... 16 Memory... 16 Disk Space and Configuration... 16 Operating System... 16 Browsers and Plug-ins... 17 Productivity... 17 PowerFAIDS Batch Processing Client... 17 8 Network Requirements... 18 SSL and Security Recommendations... 18 9 Dynamics GP 10.0 Portal Requirements... 19 CPU Size... 20 Memory... 20 Disk Space and Configuration... 20 4
1 Overview This document provides information about the hardware and software specifications for PowerCAMPUS 7.4. Testing Environments SunGard Higher Education recommends a test environment for internal release testing before updating production systems. This test environment does not need to be production level servers, and should not be used for performance testing. Virtualized servers (VMs) may be used for testing releases and updates. Production Environments The recommended configurations that follow are for production or operational environments. Virtualized Servers (VMs) are not recommended or supported for production environments. 5
2 Software Compatibility The PowerCAMPUS solution supports integration with the following third-party applications. The College Board PowerFAIDS For more information about the supported PowerFAIDS versions, please refer to the PowerCAMPUS Compatibility Report. Microsoft Dynamics GP The PowerCAMPUS integration to Microsoft Dynamics GP utilizes SQL Replication Services to move data between Microsoft Dynamics GP 10.0/11 and PowerCAMPUS. For more information about the supported Microsoft Dynamics GP versions, please refer to the PowerCAMPUS Compatibility Report. For reviewing the Microsoft Dynamics system recommendations for your environment, please refer to: http://www.microsoft.com/dynamics/gp/using/10systemrequirements.mspx Blackboard For more information about the supported Blackboard versions, please refer to the PowerCAMPUS Compatibility Report. 6
3 Database Requirements The following sections list the minimum and recommended hardware and software requirements for the database server for deploying PowerCAMPUS 7.4. The deployment of Microsoft SQL Server 2005 or 2008 server is required to host the application databases. Supported RDBs Microsoft SQL Server 2005 with Service Pack 3 (SP3) Standard or Enterprise Microsoft SQL Server 2008 with Service Pack 1 (SP1) Standard or Enterprise Important Note: The PowerCAMPUS database must be set to SQL 2000 compatibility mode. Operating System Windows Server 2003 R2 (Standard x64 or Enterprise Edition) with Service Pack 2 Windows Server 2008 R2 Standard or Enterprise Edition The OS selection is for support of 4gig of RAM or greater. For additional information on Windows 2003 server RAM support, refer to: http://www.microsoft.com/whdc/system/platform/server/pae/paemem.mspx http://support.microsoft.com/kb/283037 Microsoft Internet Information Services (IIS) 6 is required when running SQL Reporting Services 2005 7
CPU Size Minimum Dual Intel Xeon X5550, 2.66Ghz, 8M Cache, Turbo, HT, 1333MHz Recommended Dual Intel Xeon X5570, 2.93Ghz, 8M Cache, Turbo, HT, 1333MHz, or better RDB Memory Sizing Recommendations Minimum 8 GB Memory 1333MHz or faster RAM Recommended 12 GB 24 GB Memory 1333MHz or faster RAM RDB Disk Sizing Recommendations Minimum Array 1 Raid1: First two Disks For OS, Cache and SQL Install (including TEMPDB data base files) Two - 73GB 15K RPM Serial-Attach SCSI 6Gbps Hard Drive. Array 2 Raid10: For Data and Transaction Logs Four - 146GB 15K RPM Serial-Attach SCSI 6Gbps PERC H700 Integrated RAID Controller, 512MB Cache, x8 or better. NTFS file system formatted One Hot Spare Recommended Array 1 Raid1: First two Disks For OS, Cache and SQL Install (including TEMPDB data base files) Two - 73GB 15K RPM Serial-Attach SCSI 6Gbps Hard Drive. Array 2 Raid1: For Transaction Logs Two - 146GB 15K RPM Serial-Attach SCSI 6Gbps PERC H700 Integrated RAID Controller, 512MB Cache, x8 or better. Array 3 External Storage for Database Data Files Option1 Preferred ISCSI SAN, using 146GB 15K RPM Serial- Attach SCSI 6Gbps drives 8
Minimum Recommended Raid10 Volume Option2 Alternative External SCSI Disk Array, direct attached PERC 6/E SAS External RAID Adapter: Required for support of the external disk array. Raid10: Four - 146GB 15K RPM Serial-Attach SCSI 6Gbps NTFS file system formatted partition One Hot Spare RDB Backup and Failover Recommendation Redundant Power Networking Additional Quad Port Intel Gig NIC required for ISCSI SAN option: Intel Gigabit ET NIC, Quad Port, Copper, PCIe-4 9
4 PowerCAMPUS Self-Service Requirements The following sections list the minimum and recommended hardware and software requirements for deploying PowerCAMPUS Self Service 7.4. The deployment of Microsoft SQL Server 2005 or 2008 server is required to host the application databases. Refer to the Database Requirements for more information. Operating System Windows Server 2003 R2 (Standard x64 or Enterprise Edition) with Service Pack 2 Windows Server 2008 R2 Standard or Enterprise Edition The OS selection is for support of 4gig of RAM or greater. For additional information on Windows 2003 server RAM support, refer to: http://www.microsoft.com/whdc/system/platform/server/pae/paemem.mspx http://support.microsoft.com/kb/283037 Required Software 10 Microsoft.Net Framework 2.0 Microsoft.Net Framework 3.0 (required for WSS 3.0) Microsoft.Net Framework 3.5 Service Pack 1 Microsoft Internet Information Services (IIS) 6 or 7 Windows Authorization Manager Windows SharePoint Services 3.0 with Service Pack 2 (SP2) (required for Course Home Page functionality)
CPU Size Minimum Dual Intel Xeon E5540, 2.53Ghz, 8M Cache, Turbo, HT, 1066MHz Recommended Dual Intel Xeon X5560, 2.8Ghz, 8M Cache,Turbo, HT, 1333MHz, or better Memory Minimum 6 GB Memory, 1066MHz or faster RAM Recommended 8 GB 12 GB Memory, 1333MHz or faster RAM Disk Space and Configuration Recommended Two 73GB, SAS, 3.5-inch, 15K RPM Hard Drive. Raid1. PERC 5/i, Integrated Controller Card or similar NTFS file system formatted partition with 10 GB of free space plus adequate free space for your Web sites 11
5 PowerCAMPUS Portal Requirements The following sections list the minimum and recommended hardware and software requirements for deploying PowerCAMPUS Portal 7.4. The deployment of Microsoft SQL Server 2005 or 2008 server is required to host the application and Microsoft Office SharePoint Server 2007 databases. Refer to the Database Requirements for more information. Operating System Windows Server 2003 R2 (Standard x64 or Enterprise Edition) with Service Pack 2 Windows Server 2008 R2 Standard or Enterprise Edition The OS selection is for support of 4gig of RAM or greater. For additional information on Windows 2003 server RAM support, refer to: http://www.microsoft.com/whdc/system/platform/server/pae/paemem.mspx http://support.microsoft.com/kb/283037 Required Software Microsoft.Net Framework 2.0 Microsoft.Net Framework 3.5 Service Pack 1 Windows Authorization Manager Microsoft Office SharePoint Server 2007 (MOSS 2007) Standard or Enterprise with Service Pack 2 (SP2) 12
CPU Size Minimum Dual Intel Xeon E5540, 2.53Ghz, 8M Cache, Turbo, HT, 1066MHz Recommended Dual Intel Xeon X5560, 2.8Ghz, 8M Cache,Turbo, HT, 1333MHz, or better Memory Minimum 6 GB Memory, 1066MHz or faster RAM Recommended 8 GB 12 GB Memory, 1333MHz or faster RAM Disk Space and Configuration Recommended Two - 73GB 15K RPM Serial-Attach SCSI 6Gbps Hard Drive. Raid1. PERC 6 Controller Card or similar. NTFS file system formatted partition with 20 GB of free space plus adequate free space for your Web sites 13
6 Terminal Services Terminal Services is an OPTIONAL requirement to support remote administrative users. Client computers require a 32-bit Terminal Services client (included with OS). The following sections list the minimum and recommended hardware and software requirements for deploying terminal services to support remote access for administrative users to PowerCAMPUS Solutions. Operating System Windows Server 2003 R2 (Standard x64 or Enterprise Edition) with Service Pack 2 Windows Server 2008 R2 Standard or Enterprise Edition The OS selection is for support of 4gig of RAM or greater. For additional information on Windows 2003 server RAM support, refer to: http://www.microsoft.com/whdc/system/platform/server/pae/paemem.mspx http://support.microsoft.com/kb/283037 Required Software Microsoft.Net Framework 2.0 Terminal Service Client Access Licenses (CALs) to support the number of users PowerCAMPUS 7.4 14
CPU Size Minimum Dual Intel Xeon E5540, 2.53Ghz, 8M Cache, Turbo, HT, 1066MHz Recommended Dual Intel Xeon X5560, 2.8Ghz, 8M Cache,Turbo, HT, 1333MHz, or better Memory Minimum 6 GB Memory, 1066MHz or faster RAM Recommended 8 GB 12 GB Memory, 1333MHz or faster RAM Additional RAM may be required to support larger scale Terminal Server deployments. Requirements for a terminal services session is 160mb 200mb per user. This number is dependent on the number of applications the user runs simultaneously via that terminal services session. Disk Space and Configuration Recommended Two 73GB, SAS, 3.5-inch, 15K RPM Hard Drive or better. Raid1. PERC 5/i, Integrated Controller Card or similar NTFS file system formatted partition with 10 GB of free space plus adequate free space for your Web sites 15
7 Workstation Requirements The following sections list the minimum and recommended workstation hardware requirements to support the PowerCAMPUS suite of applications. CPU Size Minimum 2.0 gigahertz (GHz) or 64-bit processor Recommended 3.0 gigahertz (GHz) Dual Core or better Memory Minimum 2 gigabyte (GB) 533 MHZ or faster RAM (32-bit) or 4 GB (64-bit) Recommended 4 GB 667 MHZ or better Disk Space and Configuration Recommended 120 GB 7500 RPM SATA or better Operating System Microsoft Windows 7 (x86 or x64) Microsoft Windows Vista with Service Pack 2 (SP2) (x86 or x64) Microsoft Windows XP with Service Pack 3 (SP3) (x86) 16
Browsers and Plug-ins Microsoft Internet Explorer 7.0 or higher Mozilla Firefox 3.0 or higher Safari 4 or higher Web browser must be JavaScript and Cookies enabled. Productivity Microsoft Office 2003 Standard Adobe Acrobat Reader 7.21 or higher PowerFAIDS Batch Processing Client CSS Software Services recommends (for PowerFAIDS) that you give special consideration to your "batch processing" needs (loading students, generating batches of letters, changing budgets, assigning documents, etc.) when you plan your hardware configuration. Two approaches to maximizing performance are: use a very powerful user workstation (more powerful than the minimum recommended workstation above) or a dedicated client PC configured as a typical client. 17
8 Network Requirements Network configuration and performance will affect the overall performance of your systems. Recommended configurations for networking include a segregated networking environment for the servers and a switched backbone to the users' desktops. This allows for less broadcast contention between users and the server systems. Most new servers are equipped with 1000BaseT (Gigabit Ethernet) or fiber network connections, and most desktop or laptop workstations are delivered with 100BaseT network ports. SSL and Security Recommendations SunGard Higher Education recommends that clients get, from a trusted certificate authority, a private SSL certificate for use with the PowerCAMPUS Web applications. The basic function of an SSL certificate is to encrypt all communication between the browser and the server, ensuring that all data goes through a secure (HTTPS) connection. 18
9 Dynamics GP 10.0 Portal Requirements The following sections list the minimum and recommended hardware and software requirements for deploying the Business Portal for Dynamics GP 10.0. The deployment of Microsoft SQL Server 2005 or 2008 server is required to host the application and Microsoft Office SharePoint Server 2007 databases. Refer to the Database Requirements for more information. Operating System Windows Server 2003 R2 Enterprise Edition 32-bit required with Service Pack 2 Windows Server 2008 R2 Enterprise Edition 32-bit OS, English Language Operating System is required The OS selection is for support of 4gig of RAM or greater. For additional information on Windows 2003 server RAM support, refer to: http://www.microsoft.com/whdc/system/platform/server/pae/paemem.mspx http://support.microsoft.com/kb/283037 Important Notes: The Web server computer name must not contain an underscore (_). Do not install Dynamics GP on the Web server. This server will run the MOSS Microsoft Office SharePoint Server and the Business Portal Web applications. 19
Required Software Microsoft.Net Framework 2.0 Microsoft.Net Framework 3.5 Service Pack 1 Microsoft Office SharePoint Server 2007 (MOSS 2007) Standard or Enterprise with Service Pack 2 (SP2) Microsoft Data Access Components (MDAC) or SQL Native Client CPU Size Minimum Dual Intel Xeon E5540, 2.53Ghz, 8M Cache, Turbo, HT, 1066MHz Recommended Dual Intel Xeon X5560, 2.8Ghz, 8M Cache,Turbo, HT, 1333MHz, or better Dual Core, Hyper Threading must be enabled Memory Minimum 6 GB Memory, 1066MHz or faster RAM Recommended 8 GB 12 GB Memory, 1333MHz or faster RAM Disk Space and Configuration Recommended Two - 73GB 15K RPM Serial-Attach SCSI 6Gbps Hard Drive. Raid1. PERC 6 Controller Card or similar. NTFS file system formatted partition with 20 GB of free space plus adequate free space for your Web sites For additional system requirements, refer to: http://www.microsoft.com/en-us/dynamics/using/gp10-web-apps.aspx 20