Symantec Protection for SharePoint Servers Getting Started Guide

Transcription

1 Symantec Protection for SharePoint Servers Getting Started Guide

2 Symantec Protection for SharePoint Servers Getting Started Guide The software described in this book is furnished under a license agreement and may be used only in accordance with the terms of the agreement. Documentation version: Legal Notice Copyright 2013 Symantec Corporation. All rights reserved. Symantec, the Symantec Logo, the Checkmark Logo and are trademarks or registered trademarks of Symantec Corporation or its affiliates in the U.S. and other countries. Other names may be trademarks of their respective owners. The product described in this document is distributed under licenses restricting its use, copying, distribution, and decompilation/reverse engineering. No part of this document may be reproduced in any form by any means without prior written authorization of Symantec Corporation and its licensors, if any. THE DOCUMENTATION IS PROVIDED "AS IS" AND ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD TO BE LEGALLY INVALID. SYMANTEC CORPORATION SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES IN CONNECTION WITH THE FURNISHING, PERFORMANCE, OR USE OF THIS DOCUMENTATION. THE INFORMATION CONTAINED IN THIS DOCUMENTATION IS SUBJECT TO CHANGE WITHOUT NOTICE. The Licensed Software and Documentation are deemed to be commercial computer software as defined in FAR and subject to restricted rights as defined in FAR Section "Commercial Computer Software - Restricted Rights" and DFARS , "Rights in Commercial Computer Software or Commercial Computer Software Documentation", as applicable, and any successor regulations. Any use, modification, reproduction release, performance, display or disclosure of the Licensed Software and Documentation by the U.S. Government shall be solely in accordance with the terms of this Agreement. Symantec Corporation 350 Ellis Street Mountain View, CA

3 Getting Started This document includes the following topics: About Symantec Protection for SharePoint Servers What's new Components of Symantec Protection for SharePoint Servers Before you install About deployment options (standalone and farm environments) System requirements About installing Symantec Protection for SharePoint Servers About the installation options Post-installation tasks Where to get more information About Symantec Protection for SharePoint Servers Symantec Protection for SharePoint Servers provides virus scanning and repair services for the following SharePoint products: Windows SharePoint Services 2.0 (WSS 2.0) Windows SharePoint Services 3.0 (WSS 3.0) SharePoint Portal Server 2003 (SPS 2003) Microsoft Office SharePoint Server 2007 (MOSS 2007) Microsoft SharePoint Foundation 2010

4 4 Getting Started What's new What's new Microsoft Office SharePoint Server 2010 Microsoft SharePoint Foundation 2013 Microsoft Office SharePoint Server 2013 In addition to virus scanning and repair services, Symantec Protection for SharePoint Servers provides logging, monitoring, and reporting of infected documents on the SharePoint server. Table 1-1 describes the new features in Symantec Protection for SharePoint Servers. Table 1-1 Feature New features Description SharePoint 2013 Support You can install Symantec Protection for SharePoint Servers on SharePoint Integration with the latest Symantec Protection Engine 7.0 Symantec Scan Engine is now referred as Symantec Protection Engine. Symantec Protection for SharePoint Servers has the latest version of Symantec Protection Engine 7.0 for virus scanning and repair services. For more information, see the Symantec Protection Engine Implementation Guide. Components of Symantec Protection for SharePoint Servers Symantec Protection for SharePoint Servers includes the following components, which you can install and configure separately: Symantec Protection Engine Provides virus scanning and repair services You can install Symantec Protection Engine on the SharePoint server. You can also install Symantec Protection Engine on a separate server that is not running SharePoint. This lets you move antivirus processing off-box, thereby reducing the CPU load on the SharePoint server. The latest version of Symantec Protection Engine 7.0 is included in the software package.

5 Getting Started Before you install 5 Symantec Protection for SharePoint console Provides a means for users to configure how Symantec Protection Engine and the SharePoint server should communicate with each other, handle infected files, and monitor scanning activity. The Symantec Protection for SharePoint console refers to the administrative console of Symantec Protection for SharePoint Servers. You can configure how Symantec Protection for SharePoint Servers handles the communication between the Symantec Protection Engine and the SharePoint server through this console. Symantec Protection for SharePoint Servers also interprets the results that are returned from the protection engine after scanning. Before you install Do the following tasks before you install Symantec Protection for SharePoint Servers or its components: Provide antivirus protection for the servers on which the Symantec Protection for SharePoint Servers components run. Exclude certain directories from scanning by any other antivirus product that is running on the computers on which you install the components. To prevent a conflict between the antivirus product that is running on the host computer and Symantec Protection for SharePoint Servers, configure any other antivirus product that is running on the host computer to exclude certain directories from scanning. Table 1-2 lists the directories to exclude from scanning. Table 1-2 Directories Directories to exclude from scanning Server Windows:<Installdir>\temp Linux and Solaris :<Installdir>/temp <Installdir>\Program Files\Symantec SharePoint\Quarantine The server on which Symantec Protection Engine runs. These directories are the temporary directories that Symantec Protection Engine uses for scanning. The server on which Symantec Protection for SharePoint console runs. This is the default quarantine directory that is used by Symantec Protection for SharePoint Servers.

6 6 Getting Started About deployment options (standalone and farm environments) Plan to install the Symantec Protection for SharePoint console at a time when Microsoft Internet Information Server (IIS) can be stopped temporarily. Microsoft IIS restarts automatically after the installation is complete. Ensure that the computer on which you plan to install the console and Symantec Protection Engine meets the minimum system requirements. You can install both components together or on separate computers. Ensure that the ports 9455, 9466, and 9477 are available. For a SharePoint 2003/2007 stand-alone deployment, ensure that SharePoint is not configured with Microsoft SQL Server Desktop Engine or Windows Internal Database. Symantec Protection 6.0 for SharePoint Servers does not support a SharePoint stand-alone configuration with Microsoft SQL Server Desktop Engine or Windows Internal Database. Symantec recommends that you back up the web.config file of the SharePoint Central Administration site. About deployment options (standalone and farm environments) You must install Symantec Protection for SharePoint Servers differently based on whether you have a standalone SharePoint environment or a farm environment. For a standalone environment, you can choose the option of a full install of both components of Symantec Protection for SharePoint Servers on the same server. You can also install the Symantec Protection for SharePoint console and Symantec Protection Engine on separate computers. However, ensure that you install the Symantec Protection for SharePoint console on the SharePoint server. For more information on accessing the Central Administration console, see the Symantec Protection for SharePoint Servers Implementation Guide. In a SharePoint farm environment, based on the SharePoint version, install the Symantec Protection for SharePoint console on the following servers:

7 Getting Started System requirements 7 Microsoft SharePoint Foundation 2013/Microsoft Office SharePoint Server 2013 Install the Symantec Protection for SharePoint console on each front-end Web server in the farm and at least on one server where Central Administration service is running. You can install the Symantec Protection for SharePoint console on the other Application servers in the farm to run on-demand or scheduled scans on these servers, if desired. However, you can run these scans from the front-end servers as well. The other component, which is Symantec Protection Engine, can be installed on the same server as the Symantec Protection for SharePoint console or on a separate server. WSS 2.0/SPS 2003 Install the Symantec Protection for SharePoint console on each front-end Web server in the farm. The other component, which is Symantec Protection Engine, can be installed on the same server as the Symantec Protection for SharePoint console or on a separate server. WSS 3.0/MOSS 2007 Microsoft SharePoint Foundation 2010/Microsoft Office SharePoint Server 2010 Microsoft SharePoint Foundation 2013/Microsoft Office SharePoint Server 2013 Install the Symantec Protection for SharePoint console on each front-end Web server in the farm and at least on one server where Central Administration service is running. You can install the Symantec Protection for SharePoint console on the other Application servers in the farm to run on-demand or scheduled scans on these servers, if desired. However, you can run these scans from the front-end servers as well. The other component, which is Symantec Protection Engine, can be installed on the same server as the Symantec Protection for SharePoint console or on a separate server. System requirements You can choose to install both components of Symantec Protection for SharePoint Servers together on the same computer or on different computers. The Symantec Protection for SharePoint console and Symantec Protection Engine are supported

8 8 Getting Started System requirements on both 32-bit and 64-bit computers for Windows 2003 Server, Windows 2008 Server, and Windows 2012 Server. See System requirements for Symantec Protection for SharePoint Servers integrated installation on page 8. See System requirements for Symantec Protection for SharePoint console only on page 9. See System requirements for Symantec Protection Engine on page 11. System requirements for Symantec Protection for SharePoint Servers integrated installation Table 1-3 describes the minimum system requirements to install the Symantec Protection for SharePoint console and Symantec Protection Engine on the same server. Table 1-3 Requirement Minimum system requirements for Symantec Protection for SharePoint console and Symantec Protection Engine Details Hardware requirements Processor and Memory: As per the requirements of the version of Microsoft SharePoint Disk space: 6 GB One network interface card (NIC) running TCP/IP with a static IP address Internet connection to update antivirus definitions Operating system Symantec Protection for SharePoint Servers runs on the following platforms: Windows Server 2003 (32-bit and 64-bit) with Service Pack 2 or later Windows Server 2008 (32-bit and 64-bit) with Service Pack 2 or later Windows Server 2012 Standard or Datacenter You can use any of the following editions of Windows Server: Windows Server 2003 Standard/Enterprise/Data Center SP2/R2 Windows Server 2008 Standard/Enterprise/Data Center SP2/R2 Windows Server 2012 Standard or Datacenter

9 Getting Started System requirements 9 Table 1-3 Requirement Software requirements Minimum system requirements for Symantec Protection for SharePoint console and Symantec Protection Engine (continued) Details Any of the following Microsoft SharePoint Server editions: Windows SharePoint Services 2.0 (WSS 2.0) with Service Pack 3 (SP 3) SharePoint Portal Server 2003 (SPS 2003) with Service Pack 3 (SP 3) Windows SharePoint Services 3.0 (WSS 3.0) Microsoft Office SharePoint Server 2007 Microsoft SharePoint Foundation 2010 Microsoft Office SharePoint Server 2010 Microsoft SharePoint Foundation 2013 Microsoft SharePoint Server 2013 Any of the following Web browsers: Microsoft Internet Explorer 6.0 or higher (only for Microsoft SharePoint 2003/2007) Microsoft Internet Explorer 7.0 or higher (only for Microsoft SharePoint 2010/2013) Microsoft Internet Explorer 8/9/10 (only for Microsoft SharePoint 2013) The following software components: Microsoft.NET Framework 2.0 SP1 or higher (only for Microsoft SharePoint 2003/2007/2010) Microsoft.NET Framework version 4.5 (only for Microsoft SharePoint 2003/2007/2010) Microsoft ASP.NET 2.0 AJAX Extensions 1.0 (only for Microsoft SharePoint 2003/2007) Central Admin Site ASP.NET Version 2.0 or higher System requirements for Symantec Protection for SharePoint console only Table 1-4 describes the minimum system requirements to install the Symantec Protection for SharePoint console.

10 10 Getting Started System requirements Table 1-4 Requirement Minimum system requirements for the Symantec Protection for SharePoint console Details Hardware requirements Processor and Memory: As per the requirements of the version of Microsoft SharePoint Disk space: 512 MB (may vary depending on how long you choose to maintain log files) Operating system Symantec Protection for SharePoint Servers runs on the following platforms: Windows Server 2003 (32-bit and 64-bit) with Service Pack 2 or later Windows Server 2008 (32-bit and 64-bit) with Service Pack 2 or later You can use any of the following editions of Windows Server: Windows Server 2003 Standard/Enterprise/Data Center SP2/R2 Windows Server 2008 Standard/Enterprise/Data Center SP2/R2 Windows Server 2012 Standard or Datacenter

11 Getting Started System requirements 11 Table 1-4 Requirement Software requirements Minimum system requirements for the Symantec Protection for SharePoint console (continued) Details Any of the following Microsoft SharePoint Server editions: Windows SharePoint Services 2.0 (WSS 2.0) with Service Pack 3 (SP 3) SharePoint Portal Server 2003 (SPS 2003) with Service Pack 3 (SP 3) Windows SharePoint Services 3.0 (WSS 3.0) Microsoft Office SharePoint Server 2007 Microsoft SharePoint Foundation 2010 Microsoft Office SharePoint Server 2010 Microsoft Office SharePoint Server 2013 Any of the following Web browsers: Microsoft Internet Explorer 6.0 or higher (for Microsoft SharePoint 2003/2007) Microsoft Internet Explorer 7.0 or higher (for Microsoft SharePoint 2010/2013) Microsoft Internet Explorer 8/9/10 (only for Microsoft SharePoint 2013) The following software components: Microsoft.NET Framework 2.0 SP1 or higher (only for Microsoft SharePoint 2003/2007/2010) Microsoft.NET Framework version 4.5 (only for Microsoft SharePoint 2013) Microsoft ASP.NET 2.0 AJAX Extensions 1.0 (only for Microsoft SharePoint 2003/2007) Central Admin Site ASP.NET Version 2.0 or higher System requirements for Symantec Protection Engine You can install Symantec Protection Engine on Windows, Linux, and Solaris. See System requirements to install Symantec Protection Engine on Windows on page 12. See System requirements to install Symantec Protection Engine on Solaris on page 13. See System requirements to install Symantec Protection Engine on Linux on page 14.

12 12 Getting Started System requirements System requirements to install Symantec Protection Engine on Windows The following are the system requirements to install Symantec Protection Engine on Windows: Operating system Windows Server 2008 SP2 (32-bit and 64-bit) Windows Server 2008 R2 (64-bit) Windows Server 2012 (64-bit) Ensure that your operating system has the latest service patches available. Processor Memory Disk space Intel or AMD Server Grade Single Processor Quad Core systems or higher 4 GB of RAM or higher 5 GB of hard disk space Hardware Network interface card (NIC) running TCP/IP with a static IP address Internet connection to update definitions 100 Mbps Ethernet link (1 Gbps recommended) Software JRE 6.0 (update 25 or later), or JRE 7.0 (update 03 or later) It is recommended to use JRE 7.0 (update 03 or later). Note: Symantec Protection Engine supports only 32-bit versions of Java Runtime Environment. Symantec Protection Engine cannot be installed with 64-bit JRE versions. Microsoft Visual C (SP1 or later) redistributable package (x86) One of the following Web browsers to access the Symantec Protection Engine console: Microsoft Internet Explorer 8 or later Use Microsoft Internet Explorer to access the Symantec Protection Engine console from a Windows client computer. Mozilla Firefox 10 or later Use Mozilla Firefox to access the Symantec Protection Engine console from a Solaris or Linux client computer. The Web browser is only required for Web-based administration. The Web browser must be installed on a computer from which you want to access the Symantec Protection Engine console. The computer must have access to the server on which Symantec Protection Engine runs.

13 Getting Started System requirements 13 System requirements to install Symantec Protection Engine on Solaris The following are the system requirements to install Symantec Protection Engine on Solaris: Operating system Solaris 10 and 11 Ensure that your operating system has the latest patches available. Processor Memory Disk space UltraSPARC 4 GB of RAM or higher 5 GB of hard disk space Hardware Network interface card (NIC) running TCP/IP with a static IP address Internet connection to update definitions 100 Mbps Ethernet link (1 Gbps recommended) Software JRE 6.0 (update 25 or later), or JRE 7.0 (update 03 or later) It is recommended to use JRE 7.0 (update 03 or later). If you install the self-extracting JRE, ensure that you note the installation location. You must provide the location of the JRE if the installer is unable to detect it. Note: Symantec Protection Engine supports only 32-bit versions of Java Runtime Environment. Symantec Protection Engine cannot be installed with 64-bit JRE versions. One of the following Web browsers to access the Symantec Protection Engine console: Mozilla Firefox 10 or later Use Mozilla Firefox to access the Symantec Protection Engine console from a Solaris or Linux client computer. Microsoft Internet Explorer 8 or later Use Microsoft Internet Explorer to access the Symantec Protection Engine console from a Windows client computer. The Web browser is only required for Web-based administration. You must install the Web browser on a computer from which you want to access the Symantec Protection Engine console. The computer must have access to the server on which Symantec Protection Engine runs.

14 14 Getting Started System requirements System requirements to install Symantec Protection Engine on Linux The following are the system requirements to install Symantec Protection Engine on Linux: Operating system Red Hat Enterprise Linux Server 5.7 (32-bit and 64-bit) and later Red Hat Advanced Linux Server 5.7 (32-bit and 64-bit) and later Red Hat Enterprise Linux Server 6.2 (32-bit and 64-bit) and later Red Hat Advanced Linux Server 6.2 (32-bit and 64-bit) and later SUSE Linux Enterprise Server 11 (32-bit and 64-bit) Ensure that your operating system has the latest service patches available. Processor Memory Disk space Intel or AMD Server Grade Single Processor Quad Core systems or higher 4 GB RAM or higher 5 GB of hard disk space Hardware Network interface card (NIC) running TCP/IP with a static IP address Internet connection to update definitions 100 Mbps Ethernet link (1 Gbps recommended)

15 Getting Started About installing Symantec Protection for SharePoint Servers 15 Software Ensure that the following packages are installed: GNU sharutils or later Use this package to expand the Rapid Release packages. ncompress or later Use this package to expand the Rapid Release packages. GNU C Library (glibc) Initscripts This package is required for Red Hat Linux only. aaa_base package This package is required for SUSE only. JRE 6.0 (update 25 or later), or JRE 7.0 (update 03 or later) It is recommended to use JRE 7.0 (update 03 or later). Install the JRE using Red Hat Package Manager (RPM). Ensure that you note the installation location. You must provide the location of the JRE if the installer is unable to detect it. Note: Symantec Protection Engine supports only 32-bit versions of Java Runtime Environment. Symantec Protection Engine cannot be installed with 64-bit JRE versions. One of the following Web browsers to access the Symantec Protection Engine console: Mozilla Firefox 10 or later Use Mozilla Firefox to access the Symantec Protection Engine console from a Solaris or Linux client computer. Microsoft Internet Explorer 8 or later Use Microsoft Internet Explorer to access the Symantec Protection Engine console from a Windows client computer. The Web browser is only required for Web-based administration. You must install the Web browser on a computer from which you want to access the Symantec Protection Engine console. The computer must have access to the server on which Symantec Protection Engine runs. Note: If any of the package binary is already present on the computer and if the installer is still unable to find it, you can add the path to the binary in LD_LIBRARY_PATH environment variable. About installing Symantec Protection for SharePoint Servers Symantec Protection for SharePoint Servers comprises the following components:

16 16 Getting Started About installing Symantec Protection for SharePoint Servers Symantec Protection Engine Provides virus scanning and repair services. Symantec Protection for SharePoint console The latest version of Symantec Protection Engine 7.0 is included in the software package. Provides you a means to configure how Symantec Protection Engine and the SharePoint server communicate with each other. The console also lets you configure how Symantec Protection for SharePoint Servers handles infected files and monitors scanning activity. You can install these components separately or together. Based on the SharePoint farm environment and SharePoint version used, install the Symantec Protection for SharePoint console on all servers in the farm or only on the Application server. During installation, Symantec Protection for SharePoint Servers installs both components together or separately based on the installation option that you choose. Upgrading from previous versions The Symantec Protection for SharePoint Servers installation program checks for previous versions of the product and does one of the following: No previous version is detected Based on the installation option you choose, the installation program performs a full installation of Symantec Protection for SharePoint Servers and its components.

17 Getting Started About installing Symantec Protection for SharePoint Servers 17 A previous version of either component is detected The installation program does one of the following when it detects a previous version of Symantec Protection for SharePoint Servers for Microsoft SharePoint 2003, 2007, or 2010: Symantec Protection for SharePoint Servers (version 5.1.x): If the installation program detects an older version of Symantec Protection for SharePoint Servers, it uninstalls Symantec Protection for SharePoint Servers version 5.1.x and then installs Symantec Protection 6.0 for SharePoint Servers. The installation program does not retain any settings from the older version of the product. Symantec Protection for SharePoint Servers (version 6.0): If the installation program detects Symantec Protection for SharePoint Servers version 6.0, it upgrades the product to Symantec Protection for SharePoint Servers. The installation program retains all the settings from the older version of the product. The installation program does one of the following when it detects a previous version of Symantec Protection for SharePoint Servers for Microsoft SharePoint 2013: Symantec AntiVirus for Microsoft SharePoint (version 4.3): The installation program does not detect Symantec AntiVirus for Microsoft SharePoint (version 4.3). You must manually uninstall it before you install Symantec Protection 6.0 for SharePoint Servers. Symantec Protection for SharePoint Servers (version or older): The installation program detects any older version but does not upgrade it to You must manually uninstall it before you install Symantec Protection for SharePoint Servers. Note: While upgrading from SharePoint 2010 to SharePoint 2013, you must manually uninstall Symantec Protection for SharePoint Servers and install Symantec Protection for SharePoint Servers. The installation program does one of the following when it detects a previous version of Symantec Protection Engine: Symantec Protection Engine 7.0: It upgrades the product to Symantec Protection Engine 7.0.x. Symantec Scan Engine 5.1.x or 5.2.x: It upgrades the product to 7.0.x. Symantec Scan Engine 4.3: If the installer detects Symantec Scan Engine 4.3, you are not allowed to proceed with the installation unless you uninstall the previous version.

18 18 Getting Started About the installation options During a fresh installation of Symantec Protection Engine, you can enter the file path of a valid license for automatic license activation. Symantec Protection for SharePoint Servers automatically registers the Symantec Protection Engine if you enter the license file path during a full installation. When you register Symantec Protection Engine during the installation process, you eliminate the need to register it though the Symantec Protection for SharePoint console. If you install Symantec Protection Engine separately, you can still enter the license file path during installation. Automatic activation occurs if the license is valid. However, you must register Symantec Protection Engine manually with Symantec Protection for SharePoint Servers. Symantec Protection Engine installs a virtual administrative account during installation. Do not forget the password for this account because it is the only account that you can use to manage Symantec Protection Engine. You can change the password in the console, but to do so you must have the old password. If you do not have the license file at the time of installation, you can activate the license later through the Symantec Protection Engine console. The installation program installs the Symantec Protection for SharePoint console using the service logon details that you enter during the installation procedure. You can change the service logon details after installation. You can also password protect the console so that unauthenticated users cannot access or modify the settings. You can use the silent installation or remote installation feature for multiple installations on your network. For more information about how to perform silent upgrades or installation, see the Symantec Protection for SharePoint Servers Implementation Guide. About the installation options On a Windows platform, the software installer displays the following options: Install Symantec Protection 6.0 for SharePoint Servers (Full Install) Installs both Symantec Protection Engine and the Symantec Protection for SharePoint console. Install only the Symantec Protection Engine Installs Symantec Protection Engine only. This installation is useful if you want to move antivirus scanning off-box, thereby reducing the CPU load on the SharePoint Server. Install only the Symantec Protection for SharePoint console Installs the administrative console for Symantec Protection for SharePoint Servers

19 Getting Started Post-installation tasks 19 On a Linux/Solaris platform, you can install Symantec Protection Engine only. Because only Symantec Protection Engine is supported on Linux or Solaris. Post-installation tasks The post-installation tasks are as follows: Access the Symantec Protection for SharePoint console Enable real-time scanning Install the license for Symantec Protection Engine This step is required if you did not install the license during installation. Register the Symantec Protection Engine with the Symantec Protection for SharePoint console Configure Symantec Protection Engine Enable security risk detection Configure Symantec Protection for SharePoint Servers For more information, see the Symantec Protection for SharePoint Servers Implementation Guide. Where to get more information In addition to this guide, Symantec Protection for SharePoint Servers includes Help topics that you can access through the Help table of contents and index. You can also search for keywords in the Help. Context-sensitive Help is available on each page. You can visit the Symantec website for more information about your product. The following online resources for Symantec Protection for SharePoint Servers are available: Provides access to the technical support Knowledge Base, newsgroups, contact information, downloads, and mailing list subscriptions index.jsp Provides product news and updates

20 20 Getting Started Where to get more information Provides access to the virus encyclopedia, which contains information about all known threats; information about hoaxes; and access to white papers about threats index.jsp